GlobalBenefit Class

Properties Methods Events Config Settings Errors

The GlobalBenefit class is used to authorize Electronic Benefits Transfer (EBT) transactions with the Global Payments system, using the Global Transport Direct API. This class is supported in the Retail and Restaurant environments, and allows for simple, direct, secure communication to the Global Transport gateway through a standard Internet connection. An EBT transaction is similar to a Debit transaction, using a PIN and Key Sequence Number (KSN), but is used for Food Stamp or Cash Benefit programs.

Syntax

dpaymentssdk.Globalbenefit

Remarks

An EBT Card (also known as Cash Benefit Card or Food Stamp Card) works similar to a bank debit card. EBT is a special application of electronic funds transfer (EFT), or debit card technology, which takes money directly from one account and transfers it to another (credit cards, by comparison, simply record a sale for payment later).

There are just a few steps to setting up the class and sending transactions. First, set the UserId and Password, making sure that EBT transactions are allowed for your login credentials. If you're submitting test transaction and are using a test account, set the Server to the certification URL ("https://certapia.globalpay.com").

To send a transaction under normal circumstances, Track2 data should be read from the EBT card and placed in the MagneticStripe field. The EntryDataSource field should be set to edsMagneticStripe, and the EncryptedPIN and KSN properties should be filled with the encrypted PIN and key sequence number returned from your PIN pad. If the card reader is unable to read the magnetic stripe, card info may be manually added in the Number, ExpMonth, and ExpYear fields, (and set the EntryDataSource field to edsManuallyEntered), but only for Food Stamp Transactions. Cash Benefit transactions may not be manually keyed.

Now simply set the TransactionAmount and call the Sale method to charge the card. You may also Refund funds back to the card (Food Stamp BenefitType only), as well as send a BalanceInquiry. Voice authorizations for Food Stamp transactions may be sent using the VoucherSale method.

The status of any of the above transactions will be stored in the Code field, with human-readable text appearing in Text. Like the GlobalCharge class, there are several other Response fields which will contain data that should be logged.

EBT regulations require that all customer receipts include the last 4 digits of the Number and the TransactionId, as well as the available balance for the account accessed. Balances are returned in the FoodStampBalance and CashBenefitsBalance fields.

EBT card transactions are instant funds transfers. There is no block placed on the debit card, funds are immediately removed and sent to the merchant. Therefore, there is no ability to capture, void, or reverse EBT transactions. You must use the Refund method to return funds to a customer's card - but only for Food Stamp transactions. Cash Benefit Refund transactions are not allowed. Unlike the GlobalCharge class's Refund method, the MagneticStripe, EncryptedPIN, and KSN are required in addition to the PNRef parameter, which identifies the transaction you're issuing a refund for.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


BenefitType	Indicates whether the EBT card is a Food Stamps card or Cash Benefits card.
Card	Contains the customer's credit card information.
CashBack	Optional cash back amount to return to the customer.
CustomerName	The cardholder's name as it appears on the card.
EncryptedPIN	DUKPT DES encrypted pin block, retrieved from a PIN pad.
InvoiceNumber	Optional invoice tracking number.
KSN	Clear-text Key Serial Number retrieved from a PIN pad.
Password	Password for authentication with the Global Payments Server .
Proxy	A set of properties related to proxy access.
RegisterNumber	A number that uniquely identifies the register or computer on which the transaction was performed.
Response	Contains the response to an EBT transaction.
Server	Global Payments transaction server.
SSLAcceptServerCert	Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCert	The certificate to be used during SSL negotiation.
SSLProvider	This specifies the SSL/TLS implementation to use.
SSLServerCert	The server certificate for the last established connection.
Timeout	A timeout for the class.
TransactionAmount	Amount to be charged from (or refunded to) the card.
UserId	UserId for authentication with the Global Payments Server .

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


BalanceInquiry	Retrieves the current balances of Food Stamp and Cash Benefit accounts on an EBT card.
Config	Sets or retrieves a configuration setting.
Interrupt	Interrupt the current method.
Refund	Submits a food stamp credit transaction, returning funds to an EBT card.
Reset	Clears all properties to their default values.
Sale	Submits a sale transaction for an Electronic Benefits (EBT) card.
VoucherSale	Used to clear (force) a food stamp voucher that was previously voice-authorized.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


Error	Fired when information is available about errors during data delivery.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.
Status	Shows the progress of the Global Payments connection.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


RawRequest	Returns the request sent to the server for debugging purposes.
RawResponse	Returns the response received from the server for debugging purposes.
CloseStreamAfterTransfer	If true, the class will close the upload or download stream after the transfer.
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallListener	If true, the class binds to a SOCKS firewall as a server (TCPClient only).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the class binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
UseNTLMv2	Whether to use NTLM V2.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLContextProtocol	The protocol used when getting an SSLContext instance.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLServerCACerts	A newline separated list of CA certificate to use during SSL server certificate validation.
SSLTrustManagerFactoryAlgorithm	The algorithm to be used to create a TrustManager through TrustManagerFactory.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
GUIAvailable	Whether or not a message loop is available for processing events.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseDaemonThreads	Whether threads created by the class are daemon threads.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

BenefitType Property (GlobalBenefit Class)

Indicates whether the EBT card is a Food Stamps card or Cash Benefits card.

Syntax


public int getBenefitType();


public void setBenefitType(int benefitType);


Enumerated values:
  public final static int btCashBenefits = 0;
  public final static int btFoodStamps = 1;

Default Value

Remarks

Available Benefit Types include:


btCashBenefits (0)	Cash benefits card. May be used like a debit card, and the customer may receive cash back. However, Refund transactions are not supported.
btFoodStamps (1)	Food Stamps card. Works like a debit card, but the customer may not purchase non-food related items (including alcohol), or receive cash back.

Card Property (GlobalBenefit Class)

Contains the customer's credit card information.

Syntax


public CCCard getCard();


public void setCard(CCCard card);

Remarks

This must be set to an instance of the CCCard type, which will contain information about the credit card to be charged. This may include a MagneticStripe for swiped cards, or a Number, ExpMonth, and ExpYear for manually entered cards. (EntryDataSource indicates which set of properties will be used). See the CCCard type for more information.

This property is not available at design time.

Please refer to the CCCard type for a complete list of fields.

CashBack Property (GlobalBenefit Class)

Optional cash back amount to return to the customer.

Syntax


public String getCashBack();


public void setCashBack(String cashBack);

Default Value

Remarks

For cash back transactions, the TransactionAmount must contain the sum total of the purchase amount PLUS the CashBack amount. If the purchase is for $10 and the customer requests $20 cash back, CashBack should be set to "20.00" and TransactionAmount must contain "30.00". This amount is to be specified in US dollars, without a dollar sign but with an explicit decimal point. For instance, ten dollars and fifty cents is to be specified as "10.50".

Note that only US currency is supported for debit and EBT cash benefit transactions.

CustomerName Property (GlobalBenefit Class)

The cardholder's name as it appears on the card.

Syntax


public String getCustomerName();


public void setCustomerName(String customerName);

Default Value

Remarks

This optional field may contain up to 26 alphanumeric characters and symbols.

EncryptedPIN Property (GlobalBenefit Class)

DUKPT DES encrypted pin block, retrieved from a PIN pad.

Syntax


public String getEncryptedPIN();


public void setEncryptedPIN(String encryptedPIN);

Default Value

Remarks

A 16-byte encrypted PIN and associated KSN (Key Serial/Sequence Number) are required for all debit Sale and Refund transactions. These values must be retrieved from a certified DUKPT DES pin pad device.

Debit transactions are only supported for Retail merchants, and only for Card Present transactions. If you set the UserId to an ID associated with a Direct Marketing or E-Commerce merchant account, or otherwise attempt a card-not-present transaction, the class throws an exception.

class.UserId = "4dpayments_retail"; class.Password = "Passw0rd"; class.Card = new GlobalCard("9999999800002773=05121015432112345678"); class.TransactionAmount = "25.00"; class.EncryptedPIN = "623F36B53CC18393"; class.KSN = "000000008F000021"; class.CashBack = "5.00"; class.Sale();

InvoiceNumber Property (GlobalBenefit Class)

Optional invoice tracking number.

Syntax


public String getInvoiceNumber();


public void setInvoiceNumber(String invoiceNumber);

Default Value

Remarks

The maximum length for American Express cards is 16 characters, and 25 characters for all other card types. This property is required for the lowest rate on keyed transactions.

KSN Property (GlobalBenefit Class)

Clear-text Key Serial Number retrieved from a PIN pad.

Syntax


public String getKSN();


public void setKSN(String KSN);

Default Value

Remarks

A 16-byte Key Serial/Sequence Number (KSN) and associated EncryptedPIN are required for all debit Sale and Credit transactions. These values must be retrieved from a certified DUKPT DES pin pad device. The exact length of the Key Serial Number is 16 digits. If the PIN pad returns a 20 digit Key Serial Number and the first four characters are "FFFF", the class will internally strip the "FFFF" prior to passing the Key Serial Number to the Global Transport Gateway.

Password Property (GlobalBenefit Class)

Password for authentication with the Global Payments Server .

Syntax


public String getPassword();


public void setPassword(String password);

Default Value

Remarks

The Password will be supplied to you by Global Payments.

Proxy Property (GlobalBenefit Class)

A set of properties related to proxy access.

Syntax


public Proxy getProxy();


public void setProxy(Proxy proxy);

Remarks

This property contains fields describing the proxy through which the class will attempt to connect.

Please refer to the Proxy type for a complete list of fields.

RegisterNumber Property (GlobalBenefit Class)

A number that uniquely identifies the register or computer on which the transaction was performed.

Syntax


public String getRegisterNumber();


public void setRegisterNumber(String registerNumber);

Default Value

Remarks

This may be up to 10 alphanumeric characters in length.

Response Property (GlobalBenefit Class)

Contains the response to an EBT transaction.

Syntax


public GlobalBenefitResponse getResponse();

Remarks

This property will contain the response returned from the Global Payments server. It should be inspected (and logged) after every transaction. The GlobalBenefitResponse type contains the following fields:


CashBenefitsBalance	Balance of cash benefit funds available on the EBT card.
FoodStampBalance	Balance of food stamp funds available on the EBT card.
ApprovalCode	Contains the transaction Authorization code from the card issuer.
BatchNumber	The number of the current batch, in which this transaction is contained.
CardType	Indicates the credit card type or payment method.
Code	Contains the transaction result code from the Global Transport Gateway.
Data	Contains the raw response from the Global Payments host.
HostCode	Action code (or sequence number) returned by Global Payments.
MerchantCode	Merchant Id code which must be printed on all receipts.
Message	Contains a human-readable response message concerning the processed transaction.
MessageDetail	Contains an additional, more detailed message about the results of the transaction.
PNRef	Uniquely identifies the transaction in the Global Transport Gateway.

This property is read-only.

Please refer to the GlobalBenefitResponse type for a complete list of fields.

Server Property (GlobalBenefit Class)

Global Payments transaction server.

Syntax


public String getServer();


public void setServer(String server);

Default Value

"https://api.globalpay.com"

Remarks

This is the server to which all transactions are sent. The live URL for Global Payments is "https://api.globalpay.com". For testing and certification purposes you may set this to the test server located at "https://certapia.globalpay.com" instead.

SSLAcceptServerCert Property (GlobalBenefit Class)

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax


public Certificate getSSLAcceptServerCert();


public void setSSLAcceptServerCert(Certificate SSLAcceptServerCert);

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Please note that this functionality is provided only for cases where you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

SSLCert Property (GlobalBenefit Class)

The certificate to be used during SSL negotiation.

Syntax


public Certificate getSSLCert();


public void setSSLCert(Certificate SSLCert);

Remarks

The digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

SSLProvider Property (GlobalBenefit Class)

This specifies the SSL/TLS implementation to use.

Syntax


public int getSSLProvider();


public void setSSLProvider(int SSLProvider);


Enumerated values:
  public final static int sslpAutomatic = 0;
  public final static int sslpPlatform = 1;
  public final static int sslpInternal = 2;

Default Value

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

SSLServerCert Property (GlobalBenefit Class)

The server certificate for the last established connection.

Syntax


public Certificate getSSLServerCert();

Remarks

SSLServerCert contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

Timeout Property (GlobalBenefit Class)

A timeout for the class.

Syntax


public int getTimeout();


public void setTimeout(int timeout);

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class throws an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

TransactionAmount Property (GlobalBenefit Class)

Amount to be charged from (or refunded to) the card.

Syntax


public String getTransactionAmount();


public void setTransactionAmount(String transactionAmount);

Default Value

Remarks

This is required for Sale, AuthOnly, Refund, and Force transactions. It is optional or ignored for all others. The transaction amount may be up to 11 characters in length, and must be in the format "DDDDDDDD.CC", and be left-justified with no fill (eg: "1.99"). This must always be a positive, non-zero value.

Note that the TransactionAmount should include any GratuityAmount and/or TaxAmount. For example, if the sale price of the transaction is $10.00, and the tip on the transaction is $3.00 (for a grand total of $13.00), the TransactionAmount property should contain "13.00" and the GratuityAmount property should contain "3.00".

UserId Property (GlobalBenefit Class)

UserId for authentication with the Global Payments Server .

Syntax


public String getUserId();


public void setUserId(String userId);

Default Value

Remarks

The UserId will be supplied to you by Global Payments.

BalanceInquiry Method (Globalbenefit Class)

Retrieves the current balances of Food Stamp and Cash Benefit accounts on an EBT card.

Syntax

public void balanceInquiry();

Remarks

A BalanceInquiry transaction requests that Global Payments return the amount of funds remaining on the customer's EBT Card. No charge is made to the customer's card. The balance results from a balance inquiry on a Food Stamps card will be returned in FoodStampBalance, and the balance results from an inquiry on a Cash Benefits card will be returned in CashBenefitsBalance. For a card that accesses both Food Stamp and Cash Benefit accounts, both balances may be returned.

Config Method (Globalbenefit Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Interrupt Method (Globalbenefit Class)

Interrupt the current method.

Syntax

public void interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

Refund Method (Globalbenefit Class)

Submits a food stamp credit transaction, returning funds to an EBT card.

Syntax

public void refund(String PNRef);

Remarks

EBT credit (return) transactions are similar to debit credits in that they are real-time -- Funds are immediately added back to the customer's food stamp account, instead of the funds transfer taking place several days after settlement. EBT credits may use track2 data read from the card's magnetic stripe, or be manually keyed. Track1 data is not acceptable. The customer is required to enter enter their PIN into a certified PIN Pad device, and both an EncryptedPIN and KSN are returned from the pad to the merchant, and must be submitted in the Credit/Refund transaction.

Note that credits are only supported for the food stamp BenefitType. Attempting to send a Refund when the BenefitType is set to Cash Benefits will result in an error.

This transaction is automatically added to the current open batch, and will be settled after the current batch is released with the GlobalBatchMgr class.

Reset Method (Globalbenefit Class)

Clears all properties to their default values.

Syntax

public void reset();

Remarks

This method clears all properties to their default values.

Sale Method (Globalbenefit Class)

Submits a sale transaction for an Electronic Benefits (EBT) card.

Syntax

public void sale();

Remarks

EBT sale transactions are similar to Debit card transactions in that they are real-time and require an EncryptedPIN and KSN. EBT cards are connected to either a Food Stamp account or a Cash Benefit account, or both. Like debit transactions, EBT transactions also must use track2 data read from the card's magnetic stripe - track1 data is not acceptable. Food stamp transactions MAY be manually keyed, but cash benefit transactions may NOT be manually keyed. The BenefitType property indicates whether the sale acts on a Food Stamp or Cash Benefit account.

This transaction is automatically added to the current open batch, and will be settled after the current batch is released with the GlobalBatchMgr class.

The EBT card is specified by the Card property. Both swiped and manual-entry are supported.

The Code and Text fields indicate whether this transaction was successful. For example:

Swiped Cash Benefits transaction with cash back: class.Card = new GlobalCard("9999999800002773=09121015432112345678"); class.EncryptedPIN = "623F36B53CC18393"; class.KSN = "000000008F000021"; class.BenefitType = btCashBenefits; class.TransactionAmount = "25.00"; //$20 purchase with $5 cash back class.CashBack = "5.00"; class.Sale();

Manually-keyed Food Stamp transaction: class.Card = new GlobalCard("9999999800002773", 12, 2015); class.EncryptedPIN = "623F36B53CC18393"; class.KSN = "000000008F000021"; class.BenefitType = btFoodStamps; class.TransactionAmount = "25.00"; //Cash back not supported for food stamps! class.Sale();

VoucherSale Method (Globalbenefit Class)

Used to clear (force) a food stamp voucher that was previously voice-authorized.

Syntax

public void voucherSale(String authCode, String voucherNumber);

Remarks

If any aspect of the EBT system is down, the merchant may call the issuing state's processor for a voice authorization for Food Stamp transactions only. The merchant must complete a Manual Voucher form (provided by Global Payments or state EBT contractor) to obtain the authorization number, the voucher number and the client's signature. This puts a hold on the funds in the client's account for the amount of the voice authorization. To receive payment for the transaction, the merchant must process a Voucher Clear transaction within ten days of the voice authorization. To send a voucher clear/voucher sale, just call this method with the AuthCode and VoucherNumber parameters set.

Note that only food stamp transactions may be voice-authorized, attempting to call this method when the BenefitType is set to Cash Benefits will result in an error.

Error Event (Globalbenefit Class)

Fired when information is available about errors during data delivery.

Syntax

public class DefaultGlobalbenefitEventListener implements GlobalbenefitEventListener {
  ...
  public void error(GlobalbenefitErrorEvent e) {}
  ...
}

public class GlobalbenefitErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (Globalbenefit Class)

Fired after the server presents its certificate to the client.

Syntax

public class DefaultGlobalbenefitEventListener implements GlobalbenefitEventListener {
  ...
  public void SSLServerAuthentication(GlobalbenefitSSLServerAuthenticationEvent e) {}
  ...
}

public class GlobalbenefitSSLServerAuthenticationEvent {
  public byte[] certEncoded;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept;
}

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (Globalbenefit Class)

Fired when secure connection progress messages are available.

Syntax

public class DefaultGlobalbenefitEventListener implements GlobalbenefitEventListener {
  ...
  public void SSLStatus(GlobalbenefitSSLStatusEvent e) {}
  ...
}

public class GlobalbenefitSSLStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Status Event (Globalbenefit Class)

Shows the progress of the Global Payments connection.

Syntax

public class DefaultGlobalbenefitEventListener implements GlobalbenefitEventListener {
  ...
  public void status(GlobalbenefitStatusEvent e) {}
  ...
}

public class GlobalbenefitStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

CCCard Type

Contains the customer's credit card information.

Remarks

This type contains the customer's credit card information. If you are processing transactions where the customer and his credit card are physically present, set the MagneticStripe field with the data read from the card reader. You may set either Track1 or Track2 data (but not both). You must also set the EntryDataSource to indicate which track is stored in the MagneticStripe field.

Example: Setting the Fields CCCard card = new CCCard(); card.MagneticStripe = "B4012000033330026^FDMS TEST CARD /VISA^090410054321000000000000000 150 A"; card.EntryDataSource = edsTrack1; Example: Using a Constructor CCCard card = new CCCard("B4012000033330026^FDMS TEST CARD /VISA^090410054321000000000000000 150 A", edsTrack1);

If you are processing a transaction where the credit card is not physically present (eCommerce, mail/order, etc) or if the magstripe on the back of the card cannot be read by the card reader, you must set the Number, ExpMonth, and ExpYear fields, and EntryDataSource must be set to one of the manually entered enumerations.

Example: Setting the Fields CCCard card = new CCCard(); card.Number = "4788250000028291"; card.ExpMonth = 12; card.ExpYear = 2010; card.EntryDataSource = edsManualEntryNoCardReader; Example: Using a Constructor CCCard card = new CCCard("4012000033330026", 04, 2009); Note that the constructor in the previous example automatically sets the EntryDataSource to edsManualEntryNoCardReader. If you wish to set any other value for the EntryDataSource, you must set it yourself before authorizing the transaction.

When authorizing a transaction, the fields used by the class are solely dependant on the value of EntryDataSource. If you set the Number, ExpMonth, and ExpYear fields, but EntryDataSource is set to edsTrack2, the class will look for MagneticStripe data when authorizing the transaction, and will throws an exception because none is present.

Fields

CardType
int
Default Value: 0

Type of credit card being used in this transaction. This field contains the customer's credit card type. This is automatically computed after the Number is set, but it can also be changed manually. A list of valid card types is included below.


ctUnknown (0)	Invalid or unknown prefix, card type not known.
ctVisa (1)	Visa or Delta Card.
ctMasterCard (2)	MasterCard.
ctAMEX (3)	American Express Card.
ctDiscover (4)	Discover Card.
ctDiners (5)	Diners Club or Carte Blanche Card.
ctJCB (6)	JCB Card.
ctVisaElectron (7)	Visa Electron Card (runs as a Visa for most gateways)
ctMaestro (8)	Maestro Card
ctLaser (10)	Laser Card (Ireland)

CVVData
String
Default Value: ""

Three digit security code on back of card (optional).

This alphanumeric field contains the three digit Visa "Card Verification Value" (CVV), MasterCard "Card Verification Code" (CVC), or four-digit American Express "Card Identification Number" (CID). This value appears as additional characters embossed on the card signature line following the credit card account number on the back of the credit card. This is an optional field which can be used to determine if the customer is actually in possession of the credit card.

Even if the CVVData is incorrect, the transaction may still be authorized. It is up to the merchant to examine the ResponseCVVResult field and decide whether to honor the transaction or not.

Note: When set to a non-empty value, CVVPresence will be automatically set to cvpProvided. If set to empty string (""), CVVPresence will be automatically set to cvpNotProvided.

CVVPresence
int
Default Value: 0

Indicates the presence of the card verification value.

This field is used to indicate the presence of CVVData.

The class will automatically set this value to cvpProvided when a CVVData value is specified. You can explicitly specify the CVVPresence indicator by setting this property.

Available values are:

cvpNotProvided (0)
cvpProvided (1)
cvpIllegible (2)
cvpNotOnCard (3)

EntryDataSource
int
Default Value: 0

This field contains a 1-character code identifying the source of the customer data. The table below shows all supported values for this field.


edsTrack1 (0)	Full Magnetic stripe read and transmit, Track 1.
edsTrack2 (1)	Full magnetic stripe read and transmit, Track 2.
edsManualEntryTrack1Capable (2)	Manually keyed, Track 1 capable.
edsManualEntryTrack2Capable (3)	Manually keyed, Track 2 capable.
edsManualEntryNoCardReader (4)	Manually keyed, terminal has no card reading capability (use this for e-commerce and MOTO transactions).
edsTrack1Contactless (5)	Full magnetic stripe read (Track 1 only), Chip Card capable terminal (Visa, Mastercard, and JCB Transactions only).
edsTrack2Contactless (6)	Full magnetic stripe read (Track 2 only), Chip Card capable terminal (Visa, Mastercard, and JCB Transactions only).
edsManualEntryContactlessCapable (7)	Manually keyed, Chip Card read capable terminal (Visa, MasterCard, and JCB transactions only).
edsIVR (8)	Interactive Voice Response processing. This is applicable to Mail Order/Telephone Order (MOTO) transactions. (Number, ExpMonth, and ExpYear are sent).
edsKiosk (9)	Automated kiosk transaction. Track1 or Track2 data must be sent in MagneticStripe, the transaction cannot be manually entered.

Below is a list of processors and their support EntryDataSource values:

FDMS - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable, edsIVR, edsKiosk

FDMSOmaha - All EntryDataSources applicable

FDMS Rapid Connect - All EntryDataSources applicable

Global - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsIVR, edsKiosk

PTech - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable

TSYS - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack2Contactless, edsManualEntryContactlessCapable

TSYSHC - Values are based on Industry type.


TSYSHCBenefit	edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable
TSYSHCECommerce	edsManualEntryNoCardReader
TSYSHCRetail	edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable

ExpMonth
int
Default Value: 1

Expiration month of the credit card specified in Number.

This field contains the expiration date of the customer's credit card, and must be in the range 1 - 12.

ExpYear
int
Default Value: 2000

Expiration year of the credit card specified in Number.

This field contains the expiration date of the customer's credit card. This field must be in the range 0 - 99, or 2000 - 2099. Any date before the year 2000 or after 2099 cannot be specified.

IsEncrypted
boolean
Default Value: False

Determines whether data set to the Number or MagneticStripe fields is validated.

By default, when the Number or MagneticStripe fields are set, the value will be validated and normalized. For instance, "4444-33332222 1111" will be normalized as "4444333322221111" and MagneticStripe data will be parsed for the track specified by EntryDataSource. However, any other non-numerical data entered will cause an exception to be thrown. It may be useful in some gateways to send other data in the Number or MagneticStripe fields, and this can be accomplished by setting IsEncrypted to true. However, please note that in doing so automatic calculation of the CardType may be affected, and the card number will not be verified.

MagneticStripe
String
Default Value: ""

Track data read off of the card's magnetic stripe.

If EntryDataSource is not one of the manually entered enumerations, then this field must be set with the track1 or track2 data from the magnetic stripe on the back of the customer's credit card. This includes everything after but not including the start sentinel (% or ;) and up to but not including the end sentinel (?) and LRC check character. You may only set this field with track 1 or track 2 data, and may not pass both. Use the EntryDataSource field to indicate which track you are sending.

The following example shows how to set the MagneticStripe and EntryDataSource fields if the data read off the card is "%B4788250000028291^TSYS^05121015432112345678?;4788250000028291=05121015432112345678?"

class.Card = new CCCard("B4788250000028291^TSYS^05121015432112345678", dsTrack1) or class.Card = new CCCard("4788250000028291=05121015432112345678", dsTrack2) or CCCardType Card = new CCCard() Card.MagneticStripe = "B4788250000028291^TSYS^05121015432112345678" Card.EntryDataSource = dsTrack1

Industry regulations do not allow merchants or processors to store track data in any form of persistent storage. Failure to abide by this regulation can result in significant fines and other penalties.

Number
String
Default Value: ""

Customer's credit card number for the transaction.

If you're sending the transaction with MagneticStripe data, this field should be left empty.

Constructors

public CCCard();

public CCCard( number,  expMonth,  expYear);

public CCCard( magneticStripe,  entryDataSource);

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

EffectiveDate
String (read-only)
Default Value: ""

This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

Encoded
String
Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte[]
Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

ExpirationDate
String (read-only)
Default Value: ""

This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String
Default Value: ""

This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)
Default Value: ""

This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)
Default Value: ""

This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)
Default Value: ""

This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)
Default Value: ""

This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
String
Default Value: ""

This is the password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. KeyPassword. This field can be used to read such password-protected private keys.

Note: this property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey.

PrivateKey
String (read-only)
Default Value: ""

This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
boolean (read-only)
Default Value: False

This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)
Default Value: ""

This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)
Default Value: ""

This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String
Default Value: ""

This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)
Default Value: 0

This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)
Default Value: ""

This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)
Default Value: ""

The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String
Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte[]
Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

StorePassword
String
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
int
Default Value: 0

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This field can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String
Default Value: ""

This is the subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

SubjectAltNames
String (read-only)
Default Value: ""

This field contains comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)
Default Value: ""

This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)
Default Value: ""

This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)
Default Value: ""

This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String
Default Value: ""

This field contains the text description of UsageFlags.

This value will be of one or more of the following strings and will be separated by commas:

Digital Signatures
Key Authentication
Key Encryption
Data Encryption
Key Agreement
Certificate Signing
Key Signing

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int
Default Value: 0

This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:


0x80	Digital Signatures
0x40	Key Authentication (Non-Repudiation)
0x20	Key Encryption
0x10	Data Encryption
0x08	Key Agreement
0x04	Certificate Signing
0x02	Key Signing

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)
Default Value: ""

This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Constructors

public Certificate();

Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.

public Certificate( certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate( certificateData);

Parses CertificateData as an X.509 public key.

public Certificate( certStoreType,  store,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate( certStoreType,  storeBlob,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  storeBlob,  storePassword,  subject,  configurationString);

public Certificate( certStoreType,  storeBlob,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

GlobalBenefitResponse Type

Contains the response to an electronic benefits (EBT) transaction.

Remarks

This type contains the results of a transaction made with the GlobalBenefit class. The fields contained by this type are listed below.

Fields

ApprovalCode
String (read-only)
Default Value: ""

Contains the transaction authorization code from the card issuer.

For approved transaction responses (Code 0 or 200) the Global Transport Gateway sends a 6-character approval code in the ApprovalCode field and a human-readable approval message in the Message field. In the case of a decline, the ApprovalCode will contain an error message. Your application should display the ApprovalCode as part of the approval message for an approved transaction. For declined responses, the HostCode field will contain an additional code that provides detail on the reason for the decline.

BatchNumber
String (read-only)
Default Value: ""

The number of the batch this transaction is currently contained in. If this is a reply to an AuthOnly transaction, the BatchNumber field will be blank, as auth-onlys are not added to the open batch until a Capture is performed.

CardType
String (read-only)
Default Value: ""

Indicates the card type or payment method.

For credit card transactions, this field will contain the name of the credit card type. For instance, "VISA", "MASTERCARD", "AMEX", etc. For Debit or Electronic Benefit transactions, this field will contain "DEBIT" or "EBT".

CashBenefitsBalance
String (read-only)
Default Value: ""

Balance of cash benefit funds available on the EBT card. This is the current available balance, less any holds due to pending authorizations or withdrawals, plus any credits or deposits, which are part of the day's activity. If present, this value must be printed on the customer's receipt.

Note that EBT cards may be linked to both a Food Stamp account and a Cash Benefit account, and the balance results for these are returned in the corresponding FoodStampBalance and CashBenefitsBalance fields.

Code
String (read-only)
Default Value: ""

Contains the transaction result code from the Global Transport Gateway. This value signifies the result of the transaction (i.e. approved, declined, etc). When programmatically validating a transaction's result, this value should ALWAYS be used instead of any response message describing the result. See the table below for a full list of result codes and descriptions.


-100	Transaction NOT Processed; Generic Host Error.
0	Approved.
2	Invalid Transaction.
3	Invalid Transaction Type.
3	Unsupported Transaction Type.
4	Invalid Amount.
4	Invalid Cash Back Amount.
5	Invalid Merchant Information.
6	Time Out Waiting for Host Response.
7	Field Format Error. See Message and MessageDetail for more info.
7	Swiped and Card Present transactions are not supported in Card Not Present markets.
8	Not a Transaction Server.
11	Client Timeout Waiting for Response.
12	Declined.
14	Transaction Type Not Supported In This Version.
19	Original Transaction Id, PNRef, or Approval Code Not Found.
20	Customer Reference Number Not Found.
22	Invalid ABA Number.
23	Invalid Account Number.
24	Invalid Expiration Date.
25	Transaction Type Not Supported by Host.
26	Invalid Reference Number or PNRef.
27	Invalid Receipt Information.
28	Invalid Check Holder Name.
29	Invalid Check Number.
30	Check DL Verification Requires DL State.
31	Cannot perform multiple captures on a PreAuth.
40	Not Currently Supported.
50	Insufficient Funds Available.
99	General Error.
100	Invalid Transaction Returned from Host.
101	Timeout Value too Small or Invalid Time Out Value.
102	Processor Not Available.
103	Error Reading Response from Host.
104	Timeout waiting for Processor Response.
105	Credit Error.
106	Host Not Available.
107	Duplicate Suppression Timeout.
108	Void Error/Cannot void a previously voided or settled transaction.
109	Timeout Waiting for Host Response.
110	Duplicate Transaction.
111	Capture Error.
112	Failed AVS Check.
113	Cannot Exceed Sales Cap / Requested Refund Exceeds Available Refund Amount.
114	Cannot refund a voided transaction.
115	Sum of Tax, Tip, and Cash Back amount cannot exceed total Amount.
116	Unsupported Card Type.
117	Only Sales, Repeat Sales, Force Captures, and Post Authorizations can be refunded.
118	The amount of a Pre-Auth Complete (Capture) must be less than or equal to the original amount authorized. Please retry.
200	A Partial Authorization of a pre-paid card. This is considered an Approved transaction. Check the AuthorizedAmount field for the amount approved. See below for more information.
1000	Generic Host Error or General Exception. (Missing or invalid data). See Message and MessageDetail for more info.
1001	Invalid Login Information.
1002	Insufficient Privilege or Invalid Amount.
1002	AVS Only transactions are not supported in E-Commerce markets.
1002	Debit/EBT Return transactions must provide the PNRef from the original Sale. Please retry.
1002	Zip is required for AVS Only transaction type.
1003	Invalid Login Blocked.
1004	Invalid Login Deactivated.
1005	Transaction Type or Service Not Allowed.
1006	Unsupported Processor.
1007	Invalid Request Message.
1008	Invalid Version / The MAC value is required.
1010	Payment Type Not Supported.
1011	Error Starting Transaction.
1012	Error Finishing Transaction.
1013	Error Checking Duplicate.
1014	No Records To Settle (in the current batch).
1015	No Records To Process (in the current batch).

A Partial Authorization transaction occurs when the issuer authorizes part of the sale amount on a pre-paid credit card. The transaction is approved for an amount less than the original TransactionAmount, and the customer must tender the remaining balance with another form of payment. When a transaction is partially approved, the Code will contain "200", the Message will contain "Partial Approval", and the MessageDetail will contain "PARTIAL AP", "PARTIALLY APPROVED", or "PARTIALLY APPROVED AUTHONLY" (for auth-only transactions). the AuthorizedAmount will contain the amount of the transaction that was authorized, and the BalanceDue field will indicate the amount still owed by the customer.

If a partial authorization occurs and the customer does not wish to go through with the transaction, you must submit a reversal of the authorization in order to return funds to the prepaid card.

Data
String (read-only)
Default Value: ""

Contains the raw response data from the Global Payments host.

FoodStampBalance
String (read-only)
Default Value: ""

Balance of food stamp funds available on the EBT card. This is the current available balance, less any holds due to pending authorizations or withdrawals, plus any credits or deposits, which are part of the day's activity. If present, this value must be printed on the customer's receipt.

HostCode
String (read-only)
Default Value: ""

Action code returned by Global Payments.

Typically, if the transaction is approved, this will be the batch reference number. If the transaction is declined, the HostCode will indicate the reason for the decline. The table below lists the possible HostCode and Message combinations for error conditions.


HostCode	Message	Description
000	AP	Approved or Completed Successfully.
000	AP NEW INFO	Approved with updated cardholder data.
000	PARTIAL AP	Only part of the requested amount was approved.
001	CALL AE	Refer to American Express.
001	CALL DC	Refer to Diners Club.
001	CALL DISCOVER	Refer to Discover.
001	CALL ND	Call your Visa/MasterCard Voice Authorization Center.
001	CALL TK	Refer to TeleCheck.
001	CALL XXXXXXXXXX	Call indicated number.
001	ISSUER UNAVAIL	Global Payments cannot contact issuing bank for authorization.
002	CALL AE	Touchtone capture, won't roll to an operator.
002	CALL DC	Touchtone capture, won't roll to an operator.
002	CALL DISCOVER	Touchtone capture, won't roll to an operator.
002	CALL ND	Touchtone capture, won't roll to an operator.
002	CALL XXXXXXXXXX	Touchtone capture, won't roll to an operator.
002	ISSUER UNAVAIL	Touchtone capture, won't roll to an operator.
003	INVLD MERCH ID	Invalid Merchant ID.
004	PIC UP	Authorization Declined.
005	DECLINE	Authorization Declined.
005	DECLINE NEW INFO	Update cardholder data.
005	DECLINE TRY LATER	Try again in 3 days.
005	REVK PAY ORDERED	Stop payment of a specific recurring payment.
005	STOP PAY ORDERED	Stop all future recurring payments.
006	REVERSED	Requested transaction reversal was successful.
007	DECLINE-CV2 FAIL	Response for CVV2 failure. Declined. (Visa).
008	AP WITH ID	Approved with positive ID. Host does not capture this transaction.
012	INVLD TRAN CODE	Processing code entered is incorrect. Please refer to valid processing code.
013	INVLD AMOUNT	Amount entered is invalid.
014	INVLD ACCT	Account number does not pass issuer's edit checks.
014	INVLD CODE ACCT	Valid account number matched with a transaction code for a different card type.
014	INVLD CID	American Express CID failure.
019	PLEASE RETRY	Retry the transaction.
054	INVLD EXP DATE	Expiration date entered is incorrect.
055	PIN INVALID	Incorrect PIN entered.
058	UNAUTH TRANS	Merchant not set up for transaction code used.
075	MAX PIN RETRIES	Maximum PIN number entry attempts exceeded.
094	AP DUPE	Transaction entered is a duplicate.
0C1	SYSTEM UNAVAILABLE	Global Payments Check System unavailable.
0N2	INV AMT MATCH	The amount entered for a void or adjustment transaction does not match the amount stored in the host for that item.
0N3	INV ITEM NUM	The item number entered for a void or adjustment transaction is incorrect.
0N4	ITEM VOIDED	An adjustment or item review was attempted on a transaction previously voided.
0N5	MUST BALANCE NOW	Terminal has not been balanced within time specified in the Global Payments Merchant Master File for this merchant.
0N6	USE DUP THEN BAL	Originating device has not been balanced within time specified in the Global Payments Merchant Master File for this merchant, but merchant is set up to perform extra transactions before balancing.
0N7	NO DUP FOUND	Override transaction is attempted on a non-duplicated transaction.
0N8	INVALID DATA	Format of the transaction is incorrect.
0NA	NO TRANS FOUND	Reversal transaction is attempted on a transaction that is not in the open batch on the host.
0NC	AP NOT CAPTURED	Approved but not captured (applies only to credit card transactions)- stand in.
0NE	AP AUTH-ONLY	Approved but this EDC merchant is not set up to capture this card type (applies only to credit card transactions).
	PART AP AUTH-ONLY	Only part of the requested amount was approved, but this EDC merchant is not set up to capture this card type (applies only to credit card transactions).
0P1	APPROVED	Approved debit card transaction.
0P2	DB UNAVAIL 02	Global Payments is experiencing a problem.
0P5	UNAUTH USER	Merchant is not set up for debit on Global Payments Merchant Master File.
0P6	INVALID CARD	Invalid card number.
0T1	EDC UNAVAILABLE	EDC application down, try later.
0T2	DB UNAVAIL 01	Debit application down, try later.
121	EXCEEDS MAX AMT	Exceeds withdrawal amount limit.
121	EXCEEDS MAX AMT	Exceeds withdrawal amount limit.

IMPORTANT: When programmatically validating a transaction's result, the Code value should ALWAYS be used instead of any other response messages describing the result. For example, do not use HostCode, Message, MessageDetail, or any other responses, as these values may vary. This tables is included for informational purposes only.

InvoiceNumber
String (read-only)
Default Value: ""

Contains the same invoice number for the transaction that was originally sent in the request to the Global Transport Gateway. This field has a maximum length of 25 alphanumeric characters.

MerchantCode
String (read-only)
Default Value: ""

Merchant Id code which must be printed on all receipts.

This field will contain a 15-character code that identifies the merchant on the Global Payments host.

Message
String (read-only)
Default Value: ""

Contains a human-readable response message concerning the processed transaction.

This value is typically either Approved or Declined, but may also contain a description of any error condition. Do NOT use this when programmatically validating a transaction's result; use the Code field instead.

MessageDetail
String (read-only)
Default Value: ""

Contains a formatted response message concerning the processed transaction. This field will contain an additional message about the results of the transaction, providing more detail than the Message field alone. For approved transactions this field will typically be "APPROVAL", and for declined transactions will contain a detailed error message. Do NOT use this when programmatically validating a transaction's result; Use the Code field instead.

Note: For Debit Card Sales and Refund, the string value in MessageDetail includes non-printable characters. Global Transport removes all non-printable characters from the returned MessageDetail.

PNRef
String (read-only)
Default Value: ""

Contains a number which uniquely identifies the transaction in the Global Transport system.

This value should be stored by the POS to enable the processing transactions based on a previous transaction. For instance, Capture, Void, Refund, TipAdjustment, etc.

Constructors

public GlobalBenefitResponse();

Proxy Type

The proxy the class will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy, such as the Server and the AuthScheme.

Fields

AuthScheme
int
Default Value: 0

This field is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the User and Password fields are set.

AuthScheme should be set to authNone (3) when no authentication is expected.

By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the component will attempt basic authentication.

If AuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If AuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this field will clear the values of User and Password.

AutoDetect
boolean
Default Value: False

This field tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Note: This setting is applicable only in Windows.

Password
String
Default Value: ""

This field contains a password if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Port
int
Default Value: 80

This field contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80). See the description of the Server field for details.

Server
String
Default Value: ""

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the Server field is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned.

SSL
int
Default Value: 0

This field determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:


psAutomatic (0)	Default setting. If the URL is an `https` URL, the class will use the `psTunnel` option. If the URL is an `http` URL, the class will use the `psNever` option.
psAlways (1)	The connection is always SSL enabled.
psNever (2)	The connection is not SSL enabled.
psTunnel (3)	The connection is made through a tunneling (HTTP) proxy.

User
String
Default Value: ""

This field contains a username if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password fields are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Constructors

public Proxy();

public Proxy( server,  port);

public Proxy( server,  port,  user,  password);

Config Settings (Globalbenefit Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

GlobalBenefit Config Settings

RawRequest: Returns the request sent to the server for debugging purposes.

After an operation this setting may be queried to return the request as it was sent to the server. This is useful for debugging purposes.

RawResponse: Returns the response received from the server for debugging purposes.

After an operation this setting may be queried to return the response as it was received from the server. This is useful for debugging purposes.

TCPClient Config Settings

CloseStreamAfterTransfer: If true, the component will close the upload or download stream after the transfer.

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallListener: If true, the component binds to a SOCKS firewall as a server (TCPClient only).

This entry is for TCPClient only and does not work for other components that descend from TCPClient.

If this entry is set, the class acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

The appropriate values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the class binds.

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 with IPv4 fallback

UseNTLMv2: Whether to use NTLM V2.

When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2.

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the class will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the class is the same.

SSLCACerts: A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the class will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.

When set to 0 (default) the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP: Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the OCSP URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.

When set to 0 (default) the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLContextProtocol: The protocol used when getting an SSLContext instance.

Possible values are SSL, SSLv2, SSLv3, TLS and TLSv1. Use it only in case your security provider does not support TLS. This is the parameter "protocol" inside the SSLContext.getInstance(protocol) call.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Note: This value must be set after SSLProvider is set.

Example values: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA; SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA"); Possible values when SSLProvider is set to latform include:

SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
SSL_RSA_WITH_RC4_128_SHA
SSL_RSA_WITH_DES_CBC_SHA
SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
SSL_DH_anon_WITH_DES_CBC_SHA
SSL_RSA_EXPORT_WITH_RC4_40_MD5
SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
SSL_DH_anon_EXPORT_WITH_RC4_40_MD5
SSL_DHE_DSS_WITH_DES_CBC_SHA
SSL_RSA_WITH_NULL_MD5
SSL_DH_anon_WITH_3DES_EDE_CBC_SHA
SSL_DHE_RSA_WITH_DES_CBC_SHA
SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA
SSL_RSA_WITH_NULL_SHA
SSL_DH_anon_WITH_RC4_128_MD5
SSL_RSA_WITH_RC4_128_MD5
SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
SSL_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_NULL_SHA
TLS_DH_anon_WITH_AES_128_CBC_SHA256 (Not Recommended)
TLS_ECDH_anon_WITH_RC4_128_SHA
TLS_DH_anon_WITH_AES_128_CBC_SHA (Not Recommended)
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_KRB5_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_KRB5_EXPORT_WITH_RC4_40_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_RC4_128_SHA
TLS_ECDH_ECDSA_WITH_RC4_128_SHA
TLS_ECDH_anon_WITH_NULL_SHA
TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_RSA_WITH_NULL_SHA256
TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA
TLS_KRB5_WITH_RC4_128_MD5
TLS_ECDHE_ECDSA_WITH_NULL_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_RC4_128_SHA
TLS_EMPTY_RENEGOTIATION_INFO_SCSV
TLS_KRB5_WITH_3DES_EDE_CBC_MD5
TLS_KRB5_WITH_RC4_128_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_NULL_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_KRB5_WITH_DES_CBC_MD5
TLS_KRB5_EXPORT_WITH_RC4_40_MD5
TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5
TLS_ECDH_anon_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_KRB5_WITH_DES_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_NULL_SHA
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA

Possible values when SSLProvider is set to Internal include:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30) [Platform Only]
SSL2	12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

The platform provider is only available on Windows 11 / Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When SSLProvider is set to Internal this value is automatically set to true. This is needed for proper validation when using the internal provider.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the class will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion: Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLServerCACerts: A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLTrustManagerFactoryAlgorithm: The algorithm to be used to create a TrustManager through TrustManagerFactory.

Possible values include SunX509. This is the parameter "algorithm" inside the TrustManagerFactory.getInstance(algorithm) call.

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the class throws an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable: Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events.

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseDaemonThreads: Whether threads created by the class are daemon threads.

If set to True (default), when the class creates a thread, the thread's Daemon property will be explicitly set to True. When set to False, the class will not set the Daemon property on the created thread. The default value is True.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (Globalbenefit Class)

GlobalBenefit Errors


	432 Invalid index.
	501 Invalid length for this property.
	502 Invalid data format for this property.
	503 Value is out of range.
	504 Credit card digit check failed.
	505 Card date invalid.
	506 Card expired.
	519 Corrupt response.
	520 Response payload empty.
	526 Invalid timeout value.
	593 A property required for this transaction is missing.
	529 Error in XML response.
	533 Internal error constructing payload.

HTTP Errors


	118 Firewall Error. Error description contains detailed message.
	143 Busy executing current method.
	151 HTTP protocol error. The error message has the server response.
	152 No server specified in URL
	153 Specified URLScheme is invalid.
	155 Range operation is not supported by server.
	156 Invalid cookie index (out of range).
	301 Interrupted.
	302 Can't open AttachedFile.

TCPClient Errors


	100 You cannot change the RemotePort at this time. A connection is in progress.
	101 You cannot change the RemoteHost (Server) at this time. A connection is in progress.
	102 The RemoteHost address is invalid (0.0.0.0).
	104 Already connected. If you want to reconnect, close the current connection first.
	106 You cannot change the LocalPort at this time. A connection is in progress.
	107 You cannot change the LocalHost at this time. A connection is in progress.
	112 You cannot change MaxLineLength at this time. A connection is in progress.
	116 RemotePort cannot be zero. Please specify a valid service port number.
	117 You cannot change the UseConnection option while the class is active.
	135 Operation would block.
	201 Timeout.
	211 Action impossible in control's present state.
	212 Action impossible while not connected.
	213 Action impossible while listening.
	301 Timeout.
	303 Could not open file.
	434 Unable to convert string to selected CodePage.
	1105 Already connecting. If you want to reconnect, close the current connection first.
	1117 You need to connect first.
	1119 You cannot change the LocalHost at this time. A connection is in progress.
	1120 Connection dropped by remote host.

SSL Errors


	270 Cannot load specified security library.
	271 Cannot open certificate store.
	272 Cannot find specified certificate.
	273 Cannot acquire security credentials.
	274 Cannot find certificate chain.
	275 Cannot verify certificate chain.
	276 Error during handshake.
	280 Error verifying certificate.
	281 Could not find client certificate.
	282 Could not find server certificate.
	283 Error encrypting data.
	284 Error decrypting data.

TCP/IP Errors


	10004 [10004] Interrupted system call.
	10009 [10009] Bad file number.
	10013 [10013] Access denied.
	10014 [10014] Bad address.
	10022 [10022] Invalid argument.
	10024 [10024] Too many open files.
	10035 [10035] Operation would block.
	10036 [10036] Operation now in progress.
	10037 [10037] Operation already in progress.
	10038 [10038] Socket operation on non-socket.
	10039 [10039] Destination address required.
	10040 [10040] Message too long.
	10041 [10041] Protocol wrong type for socket.
	10042 [10042] Bad protocol option.
	10043 [10043] Protocol not supported.
	10044 [10044] Socket type not supported.
	10045 [10045] Operation not supported on socket.
	10046 [10046] Protocol family not supported.
	10047 [10047] Address family not supported by protocol family.
	10048 [10048] Address already in use.
	10049 [10049] Can't assign requested address.
	10050 [10050] Network is down.
	10051 [10051] Network is unreachable.
	10052 [10052] Net dropped connection or reset.
	10053 [10053] Software caused connection abort.
	10054 [10054] Connection reset by peer.
	10055 [10055] No buffer space available.
	10056 [10056] Socket is already connected.
	10057 [10057] Socket is not connected.
	10058 [10058] Can't send after socket shutdown.
	10059 [10059] Too many references, can't splice.
	10060 [10060] Connection timed out.
	10061 [10061] Connection refused.
	10062 [10062] Too many levels of symbolic links.
	10063 [10063] File name too long.
	10064 [10064] Host is down.
	10065 [10065] No route to host.
	10066 [10066] Directory not empty
	10067 [10067] Too many processes.
	10068 [10068] Too many users.
	10069 [10069] Disc Quota Exceeded.
	10070 [10070] Stale NFS file handle.
	10071 [10071] Too many levels of remote in path.
	10091 [10091] Network subsystem is unavailable.
	10092 [10092] WINSOCK DLL Version out of range.
	10093 [10093] Winsock not loaded yet.
	11001 [11001] Host not found.
	11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
	11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
	11004 [11004] Valid name, no data record (check DNS setup).