FDMSRegister Class

Properties   Methods   Events   Config Settings   Errors  

The FDMSRegister class is a tool used to Register and Activate a merchant account with the Datawire VXN. This allows you to send transactions through the Datawire system to the First Data Merchant Services (FDMS) processor. This class is also used to find the appropriate URLs to which authorizations and settlements will be posted.

Syntax

dpaymentssdk.Fdmsregister

Remarks

The FDMSRegister class is a tool used to Register and Activate a merchant account with the Datawire VXN. This class communicates with the Datawire VXN transaction transport network, and allows you to set up your account so that credit card transactions made with the FDMSECommerce, FDMSRetail, and FDMSSettle classs will pass through Datawire and ultimately reach the First Data Merchant Services (FDMS) transaction processor. Before you can charge a single credit card, you must Register and Activate your FDMS account, and then run a ServiceDiscovery to find acceptable URLs, which you will ultimately use to send credit card authorizations.

The first thing you must do is Register your merchant account. First Data Merchant Services will provide you with a MerchantNumber and a MerchantTerminalNumber, which are required for registering with Datawire. If you are registering on the Rapid Connect platform you must also set the GroupId configuration setting. In addition, you will need to set the TransactionNumber with a unique value (the TransactionNumber should be incremented for each transaction you send to the Datawire VXN). The example below also sets the URL to point to the Datawire test server.

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; //FDMSRegister.Config("GroupId=FDMS_Assigned_GroupId"); //Rapid Connect Only FDMSRegister.TransactionNumber = "0000001V002500" 'any unique number will do; check TransactionNumber property for format FDMSRegister.URL = "https://stagingsupport.datawire.net/staging_expresso/SRS.do" FDMSRegister.Register()

If the registration was successful, the DatawireStatus will contain "OK", and the DatawireId will contain the new Id which you must save and send with every subsequent transaction. The PrimaryDiscoveryURL and SecondaryDiscoveryURL properties will also be filled after a successful authorization. These URLs should be saved for later, and used to perform ServiceDiscovery.

After registering, you must immediately Activate the merchant. If you wait too long, your registration will time out, and you will have to contact Datawire to have them reset your account so that you may register again. When activating the merchant, the same properties are required as for the Register method, with the addition of the DatawireId property. Since the call to Register filled the DatawireId property with the correct value, all we need to do now is:

FDMSRegister.TransactionNumber = "0000002V002500" 'any unique number will do; check TransactionNumber property for format FDMSRegister.Activate()

After registering and activating the account, you may now move on to Service Discovery. The Register method will return both a PrimaryDiscoveryURL and a SecondaryDiscoveryURL. Use these URLs with the ServiceDiscovery method to retrieve a list of valid transaction URLs. For instance:

FDMSRegister.ServiceDiscovery("https://staging1.datawire.net/sd")

After a successful ServiceDiscovery the DatawireStatus will be "OK". The discovered URLs will be listed in the ServiceProviders array property. At this time, you should Ping each of these URLs and sort them in order of fastest to slowest response time. You will use the URL with the fastest response time to authorize transactions with FDMSRetail or FDMSECommerce. If the first URL stops responding, you should remove the URL and switch to the next URL in the list. The following example shows how to ping each of the ServiceProviders (you must save and sort the results yourself).

for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

If your list of servers becomes empty, perform ServiceDiscovery and the subsequent steps to re-populate the list of available servers.

You may now use the DatawireId and the Service Provider URLs retrieved by this class to submit transactions using the FDMSECommerce, FDMSRetail, and FDMSSettle classs.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

ApplicationIdIdentifies the merchant application to the Datawire System.
DatawireIdIdentifies the merchant to the Datawire System.
DatawireReturnCodeContains an error code providing more details about the DatawireStatus received.
DatawireStatusStatus of the communication with Datawire.
FDMSPlatformSpecifies the FDMS platform that the transactions will be processed on.
MerchantNumberA unique number used to identify the merchant within the FDMS and Datawire systems.
MerchantTerminalNumberUsed to identify a unique terminal within a merchant location.
PingResponseTimeReturned after calling the Ping method.
PrimaryDiscoveryURLURL to use with the ServiceDiscovery method to retrieve a list of service provider URLs.
ProxyA set of properties related to proxy access.
SecondaryDiscoveryURLURL to use with the ServiceDiscovery method to retrieve a list of service provider URLs.
ServiceProvidersArray containing a list of URLs which may be used to send credit card transactions to.
SSLAcceptServerCertInstructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during SSL negotiation.
SSLProviderThis specifies the SSL/TLS implementation to use.
SSLServerCertThe server certificate for the last established connection.
TimeoutA timeout for the class.
TransactionNumberUniquely identifies the transaction.
URLLocation of the Datawire server to which transactions are sent.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ActivateActivates a merchant account on the Datawire VXN.
ConfigSets or retrieves a configuration setting.
InterruptInterrupts the current action.
PingUsed to find the fastest service provider to use to send credit card transactions.
RegisterRegisters a merchant account on the Datawire VXN.
ResetClears all properties to their default values.
ServiceDiscoveryRetrieves transaction URLs from Datawire.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ConnectedThis event is fired immediately after a connection completes (or fails).
DataPacketInFired when receiving a data packet from the transaction server.
DataPacketOutFired when sending a data packet to the transaction server.
DisconnectedThis event is fired when a connection is closed.
ErrorFired when information is available about errors during data delivery.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusFired when secure connection progress messages are available.
StatusShows the progress of the FDMS/Datawire connection.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

GroupIdThird Party Group Identifier assigned by FDMS.
NumRetriesNumber of times to retry registration.
RetryIntervalInterval in seconds to wait between registration retry attempts.
CloseStreamAfterTransferIf true, the class will close the upload or download stream after the transfer.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallListenerIf true, the class binds to a SOCKS firewall as a server (TCPClient only).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the class binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
UseNTLMv2Whether to use NTLM V2.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSPWhether to use OCSP to check the status of the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLContextProtocolThe protocol used when getting an SSLContext instance.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated cipher suite.
SSLNegotiatedCipherStrengthReturns the negotiated cipher suite strength.
SSLNegotiatedCipherSuiteReturns the negotiated cipher suite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
SSLTrustManagerFactoryAlgorithmThe algorithm to be used to create a TrustManager through TrustManagerFactory.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
GUIAvailableWhether or not a message loop is available for processing events.
LicenseInfoInformation about the current license.
MaskSensitiveWhether sensitive data is masked in log messages.
UseDaemonThreadsWhether threads created by the class are daemon threads.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

ApplicationId Property (FDMSRegister Class)

Identifies the merchant application to the Datawire System.

Syntax


public String getApplicationId();


public void setApplicationId(String applicationId);

Default Value

"NSOFTDIRECTPXML"

Remarks

The Application ID includes the Merchant's application name and version number. This property is used to identify the merchant application within the Datawire system, and may be validated along with the MerchantTerminalNumber and DatawireId as connection credentials.

The default value of this property is assigned to the 4D Payments SDK, and is used for credit card transactions. To provision a merchant on the SVDot Closed Loop Gift Card System, use "IBIZINTGRGIFTXML" instead. You will then be able to use the FDMSGiftCard class to make transactions.

To provision a merchant for the Rapid Connect platform, use "RAPIDCONNECTSRS" instead.

Note, you may be required by FDMS or Datawire to have a new ApplicationId assigned for the software you create with this class.

DatawireId Property (FDMSRegister Class)

Identifies the merchant to the Datawire System.

Syntax


public String getDatawireId();


public void setDatawireId(String datawireId);

Default Value

""

Remarks

The Datawire Id is a unique customer identifier generated by Datawire and returned to the client after successfully registering the merchant (using the FDMSRegister class). This Id (which is sent in all subsequent transactions) allows a transaction, to pass through the Datawire system and be correctly routed to the FDMS Payment processor.

The maximum length for this property is 32 characters.

DatawireReturnCode Property (FDMSRegister Class)

Contains an error code providing more details about the DatawireStatus received.

Syntax


public String getDatawireReturnCode();


Default Value

""

Remarks

When a registration transaction has been successfully processed by the Datawire VXN, the DatawireStatus will be "OK" and the DatawireReturnCode will be "000". The following is a list of possible Datawire return codes:

000 Transaction successfully passed through the Datawire system to the FDMS Payment Processor and back.
006 Invalid session - The session context provided in the request is not valid or has expired.
008 Network Error - The request could not be processed.
200 Host Busy - The processor's Host is busy and is currently unable to service this request.
201 Host Unavailable - The processor's Host is currently unavailable. For example, the server is sending NAK.
202 Host Connect Error - Could not connect to the processor's Host.
203 Host Drop - The processor's Host disconnected during the transaction before sending a response.
204 Host Comm Error - An error was encountered while communicating with the processor's Host.
205 No Response - No response from the processor's Host
206 Host Send Error - An error has encountered when sending the request to the processor, and the Host daemon cannot continue sending packets to the processor because the connection is broken.
405 Vxn Timeout - The request could not be processed.
505 Network Error - The request could not be processed.

This property is read-only.

DatawireStatus Property (FDMSRegister Class)

Status of the communication with Datawire.

Syntax


public String getDatawireStatus();


Default Value

""

Remarks

When a registration transaction has been successfully processed by the Datawire VXN, the DatawireStatus will be "OK" and the DatawireReturnCode will be "000". The following is a list of possible Datawire response status codes:

OKTransaction has successfully passed through the Datawire system to the FDMS Payment processor and back.
AuthenticationErrorDatawireId in the request was not successfully authenticated.
UnknownServiceIDServiceId part of the URL (in the Service Discovery or Ping request) is unknown.
WrongSessionContextThe SessionContext element of the Session Transaction request does not match the SessionContext returned by the InitiateSession response (applicable to the FDMSSettle class).
AccessDeniedGenerally, occurs when you try to register a merchant after a merchant has already been activated to use the Datawire VXN.
FailedYour Merchant Registration has failed. Contact tech.support@datawire.net for more information.
RetryRegistration is not yet complete. You must send the Registration request again.
TimeoutNo response from the Service Provider was received during the expected period of time.
XMLErrorRequest contains some XML error, such as malformed XML, violation of this DTD, etc.
OtherErrorUnspecified error occurred.

This property is read-only.

FDMSPlatform Property (FDMSRegister Class)

Specifies the FDMS platform that the transactions will be processed on.

Syntax


public int getFDMSPlatform();


public void setFDMSPlatform(int FDMSPlatform);


Enumerated values:
  public final static int fpNorth = 0;
  public final static int fpNashville = 1;
  public final static int fpOmaha = 2;
  public final static int fpRapidConnect = 3;

Default Value

0

Remarks

This property is used to identify the FDMS platform that the transactions will be sent to and processed on. The following table lists the platforms supported by this class.

fpNorth (0) North/Cardnet platform.
fpNashville (1) Nashville platform.
fpOmaha (2) Omaha platform.
fpRapidConnect (3) Rapid Connect platform.

MerchantNumber Property (FDMSRegister Class)

A unique number used to identify the merchant within the FDMS and Datawire systems.

Syntax


public String getMerchantNumber();


public void setMerchantNumber(String merchantNumber);

Default Value

""

Remarks

This property contains a unique number (typically 12 digits) which is assigned by the signing merchant's bank or processor. This field is used to identify the merchant within the FDMS and Datawire systems, and is used along with the MerchantTerminalNumber and DatawireId as connection credentials.

MerchantTerminalNumber Property (FDMSRegister Class)

Used to identify a unique terminal within a merchant location.

Syntax


public String getMerchantTerminalNumber();


public void setMerchantTerminalNumber(String merchantTerminalNumber);

Default Value

""

Remarks

This property contains a number (typically 6 digits) assigned by FDMS to uniquely identify a terminal within a merchant location, and is used along with the MerchantNumber and DatawireId as connection credentials.

PingResponseTime Property (FDMSRegister Class)

Returned after calling the Ping method.

Syntax


public int getPingResponseTime();


Default Value

0

Remarks

The PingResponseTime contains the total transaction time, in milliseconds, it took for the transaction to reach the Datawire server identified by the URL passed to the Ping method. This time includes only the time the transaction spent between pinged Datawire server and the FDMS host. This property is filled after calling the Ping method. For instance:

FDMSRegister.ServiceDiscovery("https://staging1.datawire.net/sd") for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

Note: This property does not apply to Rapid Connect implementations.

This property is read-only.

PrimaryDiscoveryURL Property (FDMSRegister Class)

URL to use with the ServiceDiscovery method to retrieve a list of service provider URLs.

Syntax


public String getPrimaryDiscoveryURL();


Default Value

""

Remarks

For the North, Nashville, and Omaha platforms: This property is filled after a successful call to the Register method. This URL should be saved, as it will be needed to perform ServiceDiscovery after you Register and Activate your account. Service Discovery should be tried first with the PrimaryDiscoveryURL. If no response is received or you are unable to connect to the primary URL, you should then attempt Service Discovery with the SecondaryDiscoveryURL instead.

This property is read-only and not available at design time.

Proxy Property (FDMSRegister Class)

A set of properties related to proxy access.

Syntax


public Proxy getProxy();


public void setProxy(Proxy proxy);

Remarks

This property contains fields describing the proxy through which the class will attempt to connect.

Please refer to the Proxy type for a complete list of fields.

SecondaryDiscoveryURL Property (FDMSRegister Class)

URL to use with the ServiceDiscovery method to retrieve a list of service provider URLs.

Syntax


public String getSecondaryDiscoveryURL();


Default Value

""

Remarks

For the North, Nashville, and Omaha platforms: This property is filled after a successful call to the Register method. This URL should be saved, as it will be needed to perform ServiceDiscovery after you Register and Activate your account. Service Discovery should be tried first with the PrimaryDiscoveryURL. If no response is received or you are unable to connect to the primary URL, you should then attempt Service Discovery with the SecondaryDiscoveryURL instead.

This property is read-only and not available at design time.

ServiceProviders Property (FDMSRegister Class)

Array containing a list of URLs which may be used to send credit card transactions to.

Syntax


public String[] getServiceProviders();


Default Value

0

Remarks

For the North, Nashville, and Omaha platforms: This property is populated after a call to the ServiceDiscovery method, and contains a list of Service Provider URLs necessary to transport transactions from the application, through the Datawire VXN, then to the FDMS payment processor and back. You should Ping each of these URLs to determine which one has the shortest PingResponseTime, and use that URL for all subsequent credit card transactions.

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.TransactionNumber = "0000001V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.URL = "https://stagingsupport.datawire.net/staging_expresso/SRS.do"; FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000002V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate(); FDMSRegister.ServiceDiscovery(FDMSRegister.PrimaryDiscoveryURL); for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

For the Rapid Connect platform: This property is populated after a call to the Register method and contains a list of Service Provider URLs necessary to transport transactions from the application, through the Datawire VXN, then to the FDMS payment processor and back.

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.Config("GroupId=10001"); FDMSRegister.TransactionNumber = "0000001VRC1234"; //any unique number will do; check TransactionNumber property for format FDMSRegister.ServiceDiscovery("https://prod.dw.us.fdcnet.biz/sd/srsxml.rc"); FDMSRegister.ApplicationId = "RAPIDCONNECTSRS"; FDMSRegister.TransactionNumber = "0000002VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000003VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate();

This property is read-only.

SSLAcceptServerCert Property (FDMSRegister Class)

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax


public Certificate getSSLAcceptServerCert();


public void setSSLAcceptServerCert(Certificate SSLAcceptServerCert);

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Please note that this functionality is provided only for cases where you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

SSLCert Property (FDMSRegister Class)

The certificate to be used during SSL negotiation.

Syntax


public Certificate getSSLCert();


public void setSSLCert(Certificate SSLCert);

Remarks

The digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

SSLProvider Property (FDMSRegister Class)

This specifies the SSL/TLS implementation to use.

Syntax


public int getSSLProvider();


public void setSSLProvider(int SSLProvider);


Enumerated values:
  public final static int sslpAutomatic = 0;
  public final static int sslpPlatform = 1;
  public final static int sslpInternal = 2;

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.
Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

SSLServerCert Property (FDMSRegister Class)

The server certificate for the last established connection.

Syntax


public Certificate getSSLServerCert();


Remarks

SSLServerCert contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

Timeout Property (FDMSRegister Class)

A timeout for the class.

Syntax


public int getTimeout();


public void setTimeout(int timeout);

Default Value

30

Remarks

If Timeout is set to a positive value, and an operation cannot be completed immediately, the class will return with an error after Timeout seconds.

The default value for Timeout is 30 (seconds).

TransactionNumber Property (FDMSRegister Class)

Uniquely identifies the transaction.

Syntax


public String getTransactionNumber();


public void setTransactionNumber(String transactionNumber);

Default Value

""

Remarks

The TransactionNumber (otherwise known as the Client Reference Number, or ClientRef) uniquely identifies the packet sent by the application to the Datawire system. This parameter stores some unique token of information, and is used to match the response to the initial request sent. For example, the client application could use a static counter that is increased with the each executed request.

For all classs except FDMSGiftCard the maximum length of this property is 14 alphanumeric characters.

The FDMS recommended format is "tttttttVnnnnrrr" where ttttttt is a 7 digit transaction id, V is a constant, and nnn is a 3 digit version number and rrr is a 3 digit revision number. The 6 digit version number is typically static but unique for an application (Example: Version 2.5 = tttttttV002500).

For the Rapid Connect platform, the 6 character version number should be your Project/TPPID value. The entire TransactionNumber must be unique within a 24 hour time period.

The FDMSGiftCard also passes this value to the FDMS Closed Loop Gift Card system as a transaction id, and therefore the following restrictions are enforced: The maximum length is 7 characters. If the first character is an 'X', the remaining characters must be in the range '0' through 'F', indicating a hexadecimal number. Otherwise the FDMS Closed Loop Gift Card system only allows digits in this property.

URL Property (FDMSRegister Class)

Location of the Datawire server to which transactions are sent.

Syntax


public String getURL();


public void setURL(String URL);

Default Value

"https://support.datawire.net/production_expresso/SRS.do"

Remarks

This URL is used by the Register and Activate methods to provision the merchant. The following URLs are available for use:

https://support.datawire.net/production_expresso/SRS.doThis is the default production URL, and is used to provision a merchant on the FDMS North/Cardnet platform. The North/Cardnet platform is for making credit card transactions.
https://support.datawire.net/nocportal/SRS.doProduction server for provisioning a merchant on the FDMS ValueLink Closed Loop Gift Card system. A merchant registered with this URL may only make transactions using the FDMSGiftCard class.
https://stagingsupport.datawire.net/staging_expresso/SRS.doTest server, used for provisioning a merchant in a testing environment. A merchant registered and activated on the test system will receive test (staging) URLs in the PrimaryDiscoveryURL and SecondaryDiscoveryURL, as well as in the ServiceProviders collection. These servers may be used by the merchant for credit card testing and certification purposes (but not gift cards).
https://stagingsupport.datawire.net/nocportal/SRS.doThis is a test server for provisioning a merchant on the FDMS ValueLink Closed Loop Gift Card system. Once provisioned, the MerchantNumber/MerchantTerminalNumber/DatawireId combination may only be used to make test transactions with the FDMSGiftCard class.

For the Rapid Connect platform, URL will be populated after a successful ServiceDiscovery request.

Activate Method (Fdmsregister Class)

Activates a merchant account on the Datawire VXN.

Syntax

public void activate();

Remarks

After you have successfully registered, you will still not be able to send transactions using the Datawire VXN until you activate your account. For the security reasons, a merchant is required to activate within a limited time period after receiving a successful registration response. Otherwise, the Datawire VXN will deactivate the account and you will need to restart the registration process again.

North, Nashville, and Omaha:

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.TransactionNumber = "0000001V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.URL = "https://stagingsupport.datawire.net/staging_expresso/SRS.do"; FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000002V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate(); FDMSRegister.ServiceDiscovery(FDMSRegister.PrimaryDiscoveryURL); for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

Rapid Connect:

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.Config("GroupId=10001"); FDMSRegister.TransactionNumber = "0000001VRC1234"; //any unique number will do; check TransactionNumber property for format FDMSRegister.ServiceDiscovery("https://prod.dw.us.fdcnet.biz/sd/srsxml.rc"); FDMSRegister.ApplicationId = "RAPIDCONNECTSRS"; FDMSRegister.TransactionNumber = "0000002VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000003VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate();

Config Method (Fdmsregister Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Interrupt Method (Fdmsregister Class)

Interrupts the current action.

Syntax

public void interrupt();

Remarks

This method interrupts any processing that the class is currently executing.

Ping Method (Fdmsregister Class)

Used to find the fastest service provider to use to send credit card transactions.

Syntax

public void ping(String url);

Remarks

The Ping request is used to determine which one of the ServiceProviders URLs is the most efficient to use for transaction transport. The Ping request verifies that the ServiceProviders URLs are reachable and provides the average transaction time cost for each URL, returned in the PingResponseTime property. You should select the fastest ServiceProviders URL to be the active URL that you will use to process all transactions. You should maintain a list of the other ServiceProviders URLs in a queue from fastest to slowest, in the event that the fastest URL becomes unavailable.

A Ping should be sent for each of the ServiceProviders URLs after every 100 authorizations, to ensure that you're still using the fastest URL. A Ping should be run on the ServiceProviders URLs any time the application is first started.

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.TransactionNumber = "0000001V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.URL = "https://stagingsupport.datawire.net/staging_expresso/SRS.do"; FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000002V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate(); FDMSRegister.ServiceDiscovery(FDMSRegister.PrimaryDiscoveryURL); for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

Note: This functionaly does not apply to Rapid Connect implementations.

Register Method (Fdmsregister Class)

Registers a merchant account on the Datawire VXN.

Syntax

public void register();

Remarks

For the North, Nashville, and Omaha platforms: FDMS will supply you with a MerchantNumber, MerchantTerminalNumber, and Datawire will supply the URL to use to register your merchant. After setting the above properties, call the Register method. The Register method will send the registration request to Datawire, and will continue to poll the Datawire servers until a response is received. This may take several seconds, or even several minutes.

When the registration is complete, the registration response returns the merchant's DatawireId, and the PrimaryDiscoveryURL and SecondaryDiscoveryURL needed to perform ServiceDiscovery. Once received, these parameters must be saved permanently so that they can be reloaded and configured when necessary and are never lost due to power outages.

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.TransactionNumber = "0000001V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.URL = "https://stagingsupport.datawire.net/staging_expresso/SRS.do"; FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000002V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate(); FDMSRegister.ServiceDiscovery(FDMSRegister.PrimaryDiscoveryURL); for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

For the Rapid Connect platform: ServiceDiscovery will need to be performed first. After a successful ServiceDiscovery call, URL will be populated with the URL required to provision your merchant account. Once TransactionNumber and ApplicationId are set, Register can be called. The Register method will send the registration request to Datawire, and will continue to poll the Datawire servers until a response is received. This may take several seconds, or even several minutes.

When the registration is complete, the registration response returns the merchant's DatawireId, and the PrimaryDiscoveryURL and SecondaryDiscoveryURL needed to process transactions. Once received, these parameters must be saved permanently so that they can be reloaded and configured when necessary and are never lost due to power outages.

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.Config("GroupId=10001"); FDMSRegister.TransactionNumber = "0000001VRC1234"; //any unique number will do; check TransactionNumber property for format FDMSRegister.ServiceDiscovery("https://prod.dw.us.fdcnet.biz/sd/srsxml.rc"); FDMSRegister.ApplicationId = "RAPIDCONNECTSRS"; FDMSRegister.TransactionNumber = "0000002VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000003VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate();

Reset Method (Fdmsregister Class)

Clears all properties to their default values.

Syntax

public void reset();

Remarks

This method clears all properties to their default values.

ServiceDiscovery Method (Fdmsregister Class)

Retrieves transaction URLs from Datawire.

Syntax

public void serviceDiscovery(String url);

Remarks

Service Discovery is the means by which you retrieve the actual transaction URLs, used for making credit card authorizations and sending batch settlements.

For the North, Nashville, and Omaha platforms: The response to a successful call to the Register method will return a PrimaryDiscoveryURL and SecondaryDiscoveryURL. After the account has been activated, call the ServiceDiscovery method with either of these URLs as the URL parameter. A successful ServiceDiscovery will provide a list of Service Provider URL's necessary to transport transactions from the application through the Datawire VXN to the FDMS payment processor and back. This list of URL's returned will be stored in the ServiceProviders array property. You should Ping each of these URLs to determine which one has the shortest PingResponseTime, and use that URL for subsequent credit card transactions (note that you should re-Ping each of the URLs received in the ServiceProviders array every 100 transactions, and when first initializing your software).

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.TransactionNumber = "0000001V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.URL = "https://stagingsupport.datawire.net/staging_expresso/SRS.do"; FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000002V002500"; //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate(); FDMSRegister.ServiceDiscovery(FDMSRegister.PrimaryDiscoveryURL); for (int i = 0; i < FDMSRegister.ServiceProviders.Length; i++) { FDMSRegister.Ping(FDMSRegister.ServiceProviders[i]); Console.WriteLine(FDMSRegister.ServiceProviders[i] + " = " + FDMSRegister.PingResponseTime); }

For the Rapid Connect platform: ServiceDiscovery will be the first step in provisioning a merchant. FDMS will supply you with a MerchantNumber, MerchantTerminalNumber, and GroupId. After setting these properties, ServiceDiscovery should be called. The default URL, when URL parameter is set to "" (empty string), is "https://prod.dw.us.fdcnet.biz/sd/srsxml.rc". A successful ServiceDiscovery will provide the URL, accessible via URL, necessary to provision a merchant account.

For example:

FDMSRegister.MerchantNumber = "000000999990"; FDMSRegister.MerchantTerminalNumber = "555555"; FDMSRegister.Config("GroupId=10001"); FDMSRegister.TransactionNumber = "0000001VRC1234"; //any unique number will do; check TransactionNumber property for format FDMSRegister.ServiceDiscovery("https://prod.dw.us.fdcnet.biz/sd/srsxml.rc"); FDMSRegister.ApplicationId = "RAPIDCONNECTSRS"; FDMSRegister.TransactionNumber = "0000002VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Register(); FDMSRegister.TransactionNumber = "0000003VRC1234" //any unique number will do; check TransactionNumber property for format FDMSRegister.Activate();

Connected Event (Fdmsregister Class)

This event is fired immediately after a connection completes (or fails).

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void connected(FdmsregisterConnectedEvent e) {}
  ...
}

public class FdmsregisterConnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

DataPacketIn Event (Fdmsregister Class)

Fired when receiving a data packet from the transaction server.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void dataPacketIn(FdmsregisterDataPacketInEvent e) {}
  ...
}

public class FdmsregisterDataPacketInEvent {
  public byte[] dataPacket;
}

Remarks

This event fires when a packet is received. The entire data packet (including all framing and error detection characters) is contained in the parameter "DataPacket". This parameter may be inspected for advanced troubleshooting, or to extract additional response properties beyond the scope of this class.

DataPacketOut Event (Fdmsregister Class)

Fired when sending a data packet to the transaction server.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void dataPacketOut(FdmsregisterDataPacketOutEvent e) {}
  ...
}

public class FdmsregisterDataPacketOutEvent {
  public byte[] dataPacket;
}

Remarks

This event fires right before each data packet is sent. The entire data packet (including all framing and error detection characters) is contained in the parameter "DataPacket". This parameter may be inspected for advanced troubleshooting, or may be modified to support additional features beyond the scope of this class.

Disconnected Event (Fdmsregister Class)

This event is fired when a connection is closed.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void disconnected(FdmsregisterDisconnectedEvent e) {}
  ...
}

public class FdmsregisterDisconnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

Error Event (Fdmsregister Class)

Fired when information is available about errors during data delivery.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void error(FdmsregisterErrorEvent e) {}
  ...
}

public class FdmsregisterErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (Fdmsregister Class)

Fired after the server presents its certificate to the client.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void SSLServerAuthentication(FdmsregisterSSLServerAuthenticationEvent e) {}
  ...
}

public class FdmsregisterSSLServerAuthenticationEvent {
  public byte[] certEncoded;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept;
}

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (Fdmsregister Class)

Fired when secure connection progress messages are available.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void SSLStatus(FdmsregisterSSLStatusEvent e) {}
  ...
}

public class FdmsregisterSSLStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Status Event (Fdmsregister Class)

Shows the progress of the FDMS/Datawire connection.

Syntax

public class DefaultFdmsregisterEventListener implements FdmsregisterEventListener {
  ...
  public void status(FdmsregisterStatusEvent e) {}
  ...
}

public class FdmsregisterStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

EffectiveDate
String (read-only)

Default Value: ""

This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

Encoded
String

Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte[]

Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

ExpirationDate
String (read-only)

Default Value: ""

This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String

Default Value: ""

This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)

Default Value: ""

This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)

Default Value: ""

This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)

Default Value: ""

This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)

Default Value: ""

This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
String

Default Value: ""

This is the password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. KeyPassword. This field can be used to read such password-protected private keys.

Note: this property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey.

PrivateKey
String (read-only)

Default Value: ""

This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
boolean (read-only)

Default Value: False

This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)

Default Value: ""

This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)

Default Value: ""

This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String

Default Value: ""

This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)

Default Value: 0

This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)

Default Value: ""

This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)

Default Value: ""

The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String

Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte[]

Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StorePassword
String

Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
int

Default Value: 0

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This field can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: this store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String

Default Value: ""

This is the subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

SubjectAltNames
String (read-only)

Default Value: ""

This field contains comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)

Default Value: ""

This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)

Default Value: ""

This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)

Default Value: ""

This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String

Default Value: ""

This field contains the text description of UsageFlags.

This value will be of one or more of the following strings and will be separated by commas:

  • Digital Signatures
  • Key Authentication
  • Key Encryption
  • Data Encryption
  • Key Agreement
  • Certificate Signing
  • Key Signing

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int

Default Value: 0

This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:

0x80Digital Signatures
0x40Key Authentication (Non-Repudiation)
0x20Key Encryption
0x10Data Encryption
0x08Key Agreement
0x04Certificate Signing
0x02Key Signing

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)

Default Value: ""

This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Constructors

public Certificate();

Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.

public Certificate( certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate( certificateData);

Parses CertificateData as an X.509 public key.

public Certificate( certStoreType,  store,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate( certStoreType,  storeBlob,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  storeBlob,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  storeBlob,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Proxy Type

The proxy the class will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy, such as the Server and the AuthScheme.

Fields

AuthScheme
int

Default Value: 0

This field is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the User and Password fields are set.

AuthScheme should be set to authNone (3) when no authentication is expected.

By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the component will attempt basic authentication.

If AuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If AuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this field will clear the values of User and Password.

AutoDetect
boolean

Default Value: False

This field tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Note: This setting is applicable only in Windows.

Password
String

Default Value: ""

This field contains a password if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Port
int

Default Value: 80

This field contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80). See the description of the Server field for details.

Server
String

Default Value: ""

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the Server field is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned.

SSL
int

Default Value: 0

This field determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

psAutomatic (0)Default setting. If the URL is an https URL, the class will use the psTunnel option. If the URL is an http URL, the class will use the psNever option.
psAlways (1)The connection is always SSL enabled.
psNever (2)The connection is not SSL enabled.
psTunnel (3)The connection is made through a tunneling (HTTP) proxy.

User
String

Default Value: ""

This field contains a username if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password fields are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Constructors

public Proxy();



public Proxy( server,  port);



public Proxy( server,  port,  user,  password);



Config Settings (Fdmsregister Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

FDMSRegister Config Settings

GroupId:   Third Party Group Identifier assigned by FDMS.

This setting specifies the FDMS assigned group Id. This is required for the Rapid Connect platform.

NumRetries:   Number of times to retry registration.

After calling the Register method, the class will continue to poll the Datawire VXN system until an Approval response is received. This setting indicates the maximum number of retries to attempt before aborting. The default value for Rapid Connect is 3 and all other platforms is 20.

RetryInterval:   Interval in seconds to wait between registration retry attempts.

Number of seconds to wait between retry attempts. The default value for Rapid Connect is 30 seconds and all other platforms is 2 seconds.

TCPClient Config Settings

CloseStreamAfterTransfer:   If true, the component will close the upload or download stream after the transfer.

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallListener:   If true, the component binds to a SOCKS firewall as a server (TCPClient only).

This entry is for TCPClient only and does not work for other components that descend from TCPClient.

If this entry is set, the class acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

The appropriate values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the class binds.

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

0 IPv4 Only
1 IPv6 Only
2 IPv6 with IPv4 fallback
UseNTLMv2:   Whether to use NTLM V2.

When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2.

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the class will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the class is the same.

SSLCACerts:   A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the class will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.

When set to 0 (default) the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP:   Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the OCSP URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.

When set to 0 (default) the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLContextProtocol:   The protocol used when getting an SSLContext instance.

Possible values are SSL, SSLv2, SSLv3, TLS and TLSv1. Use it only in case your security provider does not support TLS. This is the parameter "protocol" inside the SSLContext.getInstance(protocol) call.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Note: This value must be set after SSLProvider is set.

Example values: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA; SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA"); Possible values when SSLProvider is set to latform include:

  • SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • SSL_RSA_WITH_RC4_128_SHA
  • SSL_RSA_WITH_DES_CBC_SHA
  • SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DH_anon_WITH_DES_CBC_SHA
  • SSL_RSA_EXPORT_WITH_RC4_40_MD5
  • SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DH_anon_EXPORT_WITH_RC4_40_MD5
  • SSL_DHE_DSS_WITH_DES_CBC_SHA
  • SSL_RSA_WITH_NULL_MD5
  • SSL_DH_anon_WITH_3DES_EDE_CBC_SHA
  • SSL_DHE_RSA_WITH_DES_CBC_SHA
  • SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA
  • SSL_RSA_WITH_NULL_SHA
  • SSL_DH_anon_WITH_RC4_128_MD5
  • SSL_RSA_WITH_RC4_128_MD5
  • SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • SSL_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_NULL_SHA
  • TLS_DH_anon_WITH_AES_128_CBC_SHA256 (Not Recommended)
  • TLS_ECDH_anon_WITH_RC4_128_SHA
  • TLS_DH_anon_WITH_AES_128_CBC_SHA (Not Recommended)
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_KRB5_EXPORT_WITH_RC4_40_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_RC4_128_SHA
  • TLS_ECDH_ECDSA_WITH_RC4_128_SHA
  • TLS_ECDH_anon_WITH_NULL_SHA
  • TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_NULL_SHA256
  • TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA
  • TLS_KRB5_WITH_RC4_128_MD5
  • TLS_ECDHE_ECDSA_WITH_NULL_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_RC4_128_SHA
  • TLS_EMPTY_RENEGOTIATION_INFO_SCSV
  • TLS_KRB5_WITH_3DES_EDE_CBC_MD5
  • TLS_KRB5_WITH_RC4_128_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_NULL_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_WITH_DES_CBC_MD5
  • TLS_KRB5_EXPORT_WITH_RC4_40_MD5
  • TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5
  • TLS_ECDH_anon_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_KRB5_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_NULL_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA

Possible values when SSLProvider is set to Internal include:

  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30) [Platform Only]
SSL2 12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

  • The platform provider is only available on Windows 11 / Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When SSLProvider is set to Internal this value is automatically set to true. This is needed for proper validation when using the internal provider.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the class will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLServerCACerts:   A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLTrustManagerFactoryAlgorithm:   The algorithm to be used to create a TrustManager through TrustManagerFactory.

Possible values include SunX509. This is the parameter "algorithm" inside the TrustManagerFactory.getInstance(algorithm) call.

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the class throws an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable:   Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events.

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitive:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseDaemonThreads:   Whether threads created by the class are daemon threads.

If set to True (default), when the class creates a thread, the thread's Daemon property will be explicitly set to True. When set to False, the class will not set the Daemon property on the created thread. The default value is True.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (Fdmsregister Class)

FDMSRegister Errors

432   Invalid index.
501   Invalid length for this property.
502   Invalid data format for this property.
503   Value is out of range.
504   Credit card digit check failed.
505   Card date invalid.
506   Card expired.
519   Corrupt response.
520   Response payload empty.
521   Response truncated.
526   Invalid timeout value.
593   A property required for this transaction is missing.
529   Error in XML response.
530   Status code received in response indicates an error condition.
531   Return code received in response indicates an error condition.
532   Cannot generate detail aggregate - this transaction was not successfully authorized.
533   Internal error constructing payload.

HTTP Errors

118   Firewall Error. Error description contains detailed message.
143   Busy executing current method.
151   HTTP protocol error. The error message has the server response.
152   No server specified in URL
153   Specified URLScheme is invalid.
155   Range operation is not supported by server.
156   Invalid cookie index (out of range).
301   Interrupted.
302   Can't open AttachedFile.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the class is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
303   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).