PTechGiftCard Control

Properties   Methods   Events   Config Settings   Errors  

The PTechGiftCard control is used to manipulate funds on Stored Value (Gift) Cards with the Paymentech NetConnect system on the Tampa platform. This control supports card-present gift card transactions, and allows for simple, direct, secure communication to the Paymentech TLS/SSL gateway through a standard Internet connection. This control can be integrated into web pages or stand- alone Point Of Sale applications. Because all TLS/SSL communications are handled inside the control, any application or web page can be deployed without the need for expensive dedicated TLS/SSL servers.

Syntax

PTechGiftCard

Remarks

A Stored Value Card (or Gift Card as they are commonly called) is a not actually a type of credit or debit card. Simply put, a Stored Value Card is a card with a magnetic strip on the back that holds information about monies that have been "pre-paid" into an account for the purpose of making financial transactions. Examples include a retailer's gift card, a prepaid telephone card, a college campus meal plan card, a reloadable subway pass, etcetera. Not included are government income-support cards, otherwise known as EBT cards or electronic food stamps.

There just a few steps to setting up the control and sending transactions. First, set the MerchantNumber, TerminalNumber, ClientNumber, UserId, and Password with the information given to you when you signed up for Paymentech service. You should also set your PINCapability and CashRegisterId at this time.

After the merchant information is setup, you may enter transaction data. When the CardEntryDataSource is Manually Entered, the merchant should fill the CardNumber, CardExpMonth, and CardExpYear properties. Otherwise, you should fill the CardMagneticStripe property with the Track 2 data read from the back of the card, and set CardEntryDataSource to Track2. These are the only two Entry Data Sources supported for Stored Value (Gift) Cards.

Now you must choose what transaction you wish to make. Adding Value to a card, Redeeming a card, voiding a previous transaction, or retrieving the card's current balance.

To add funds to an existing Gift Card, simply set the TransactionAmount with the amount to add to the card, and then call AddValue. Activating a new gift card is handled the same way. If the card indicated by CardMagneticStripe (or CardNumber) has not yet been activated, calling AddValue will automatically activate it with the amount indicated by TransactionAmount.

To redeem funds from a Gift Card due to a customer purchase, set TransactionAmount to the total for the purchase and call RedeemCard. If the Gift Card account contains enough funds, ResponseCode will indicate the card was approved. If there are not enough funds available on the card to cover the TransactionAmount, normally the transaction will be declined. However, the merchant may set PartialRedemption to True. This allows the customer to split the cost of the purchase between the Gift Card and another form of payment. Instead of declining the Gift Card, ResponseAuthorizedAmount will contain the amount deducted from the Gift Card. The merchant may subtract that from TransactionAmount to determine the difference to charge the customer.

Finally, you may inquire as to the total funds contained on the card by calling BalanceInquiry. This will not effect the amount of funds contained on the card in any way.

The status of any of the above transactions will be stored in the ResponseCode property, with human-readable text appearing in ResponseText. Like the PTechCharge control, there are several other Response fields which will contain data that should be logged. However, there are a few new properties specific to the PTechGiftCard control: ResponseBalance will be returned after all transactions except VoidTransaction, and will contain the current balance of the Gift Card. ResponsePreviousBalance will indicate the balance BEFORE the last transaction went through. The ResponseTrace property is used for tracking after the sale, and must be printed on every customer receipt.

Gift Card transactions are instant funds transfers. There is no block placed on the debit card, funds are immediately removed and sent to the merchant. Therefore, only the Host Capture settlement mode is supported. At the end of the day you should release the current batch using the PTechHostSettle control (the batch may contain other authorizations that were made using different controls from this product. See the documentation for the other controls you are using for more information).

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

CardType Property (PTechGiftCard Control)

Type of credit card being used in this transaction.

Syntax

ptechgiftcardcontrol.CardType[=integer]

Possible Values

ctUnknown(0), 
ctVisa(1), 
ctMasterCard(2), 
ctAMEX(3), 
ctDiscover(4), 
ctDiners(5), 
ctJCB(6), 
ctVisaElectron(7), 
ctMaestro(8), 
ctLaser(10)

Default Value

0

Remarks

Type of credit card being used in this transaction. This property contains the customer's credit card type. This is automatically computed after the CardNumber is set, but it can also be changed manually. A list of valid card types is included below.

This property is not available at design time.

Data Type

Integer

CardCVVData Property (PTechGiftCard Control)

Three digit security code on back of card (optional).

Syntax

ptechgiftcardcontrol.CardCVVData[=string]

Default Value

""

Remarks

Three digit security code on back of card (optional).

This alphanumeric property contains the three digit Visa "Card Verification Value" (CVV), MasterCard "Card Verification Code" (CVC), or four-digit American Express "Card Identification Number" (CID). This value appears as additional characters embossed on the card signature line following the credit card account number on the back of the credit card. This is an optional property which can be used to determine if the customer is actually in possession of the credit card.

Even if the CardCVVData is incorrect, the transaction may still be authorized. It is up to the merchant to examine the ResponseCVVResult property and decide whether to honor the transaction or not.

Note: When set to a non-empty value, CardCVVPresence will be automatically set to cvpProvided. If set to empty string (""), CardCVVPresence will be automatically set to cvpNotProvided.

This property is not available at design time.

Data Type

String

CardCVVPresence Property (PTechGiftCard Control)

Indicates the presence of the card verification value.

Syntax

ptechgiftcardcontrol.CardCVVPresence[=integer]

Possible Values

cvpNotProvided(0), 
cvpProvided(1), 
cvpIllegible(2), 
cvpNotOnCard(3)

Default Value

0

Remarks

Indicates the presence of the card verification value.

This property is used to indicate the presence of CardCVVData.

The control will automatically set this value to cvpProvided when a CardCVVData value is specified. You can explicitly specify the CardCVVPresence indicator by setting this property.

Available values are:

• cvpNotProvided (0)
• cvpProvided (1)
• cvpIllegible (2)
• cvpNotOnCard (3)

This property is not available at design time.

Data Type

Integer

CardEntryDataSource Property (PTechGiftCard Control)

This property contains a 1-character code identifying the source of the customer data.

Syntax

ptechgiftcardcontrol.CardEntryDataSource[=integer]

Possible Values

edsTrack1(0), 
edsTrack2(1), 
edsManualEntryTrack1Capable(2), 
edsManualEntryTrack2Capable(3), 
edsManualEntryNoCardReader(4), 
edsTrack1Contactless(5), 
edsTrack2Contactless(6), 
edsManualEntryContactlessCapable(7), 
edsIVR(8), 
edsKiosk(9)

Default Value

0

Remarks

This property contains a 1-character code identifying the source of the customer data. The table below shows all supported values for this property.

Below is a list of processors and their support EntryDataSource values:

FDMS - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable, edsIVR, edsKiosk

FDMSOmaha - All EntryDataSources applicable

FDMS Rapid Connect - All EntryDataSources applicable

Global - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsIVR, edsKiosk

PTech - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable

TSYS - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack2Contactless, edsManualEntryContactlessCapable

TSYSHC - Values are based on Industry type.

This property is not available at design time.

Data Type

Integer

CardExpMonth Property (PTechGiftCard Control)

Expiration month of the credit card specified in Number .

Syntax

ptechgiftcardcontrol.CardExpMonth[=integer]

Default Value

1

Remarks

Expiration month of the credit card specified in CardNumber.

This property contains the expiration date of the customer's credit card, and must be in the range 1 - 12.

This property is not available at design time.

Data Type

Integer

CardExpYear Property (PTechGiftCard Control)

Expiration year of the credit card specified in Number .

Syntax

ptechgiftcardcontrol.CardExpYear[=integer]

Default Value

2000

Remarks

Expiration year of the credit card specified in CardNumber.

This property contains the expiration date of the customer's credit card. This property must be in the range 0 - 99, or 2000 - 2099. Any date before the year 2000 or after 2099 cannot be specified.

This property is not available at design time.

Data Type

Integer

CardIsEncrypted Property (PTechGiftCard Control)

Determines whether data set to the Number or MagneticStripe properties is validated.

Syntax

ptechgiftcardcontrol.CardIsEncrypted[=boolean]

Default Value

False

Remarks

Determines whether data set to the CardNumber or CardMagneticStripe fields is validated.

By default, when the CardNumber or CardMagneticStripe fields are set, the value will be validated and normalized. For instance, "4444-33332222 1111" will be normalized as "4444333322221111" and CardMagneticStripe data will be parsed for the track specified by CardEntryDataSource. However, any other non-numerical data entered will cause an exception to be thrown. It may be useful in some gateways to send other data in the CardNumber or CardMagneticStripe fields, and this can be accomplished by setting IsEncrypted to true. However, please note that in doing so automatic calculation of the CardType may be affected, and the card number will not be verified.

This property is not available at design time.

Data Type

Boolean

CardMagneticStripe Property (PTechGiftCard Control)

Track data read off of the card's magnetic stripe.

Syntax

ptechgiftcardcontrol.CardMagneticStripe[=string]

Default Value

""

Remarks

Track data read off of the card's magnetic stripe.

If CardEntryDataSource is not one of the manually entered enumerations, then this property must be set with the track1 or track2 data from the magnetic stripe on the back of the customer's credit card. This includes everything after but not including the start sentinel (% or ;) and up to but not including the end sentinel (?) and LRC check character. You may only set this property with track 1 or track 2 data, and may not pass both. Use the CardEntryDataSource property to indicate which track you are sending.

The following example shows how to set the CardMagneticStripe and CardEntryDataSource properties if the data read off the card is "%B4788250000028291^TSYS^05121015432112345678?;4788250000028291=05121015432112345678?"

control.CardMagneticStripe = "B4788250000028291^TSYS^05121015432112345678" control.CardEntryDataSource = edsTrack1 or control.CardMagneticStripe = "4788250000028291=05121015432112345678" control.CardEntryDataSource = edsTrack2

Industry regulations do not allow merchants or processors to store track data in any form of persistent storage. Failure to abide by this regulation can result in significant fines and other penalties.

This property is not available at design time.

Data Type

String

CardNumber Property (PTechGiftCard Control)

Customer's credit card number for the transaction.

Syntax

ptechgiftcardcontrol.CardNumber[=string]

Default Value

""

Remarks

Customer's credit card number for the transaction.

If you're sending the transaction with CardMagneticStripe data, this property should be left empty.

This property is not available at design time.

Data Type

String

CashOutIndicator Property (PTechGiftCard Control)

Indicates to the host that the customer wants the remainder of the card's value returned as cash.

Syntax

ptechgiftcardcontrol.CashOutIndicator[=boolean]

Default Value

False

Remarks

When the CashOutIndicator is set to True, the stored value card will be "cashed out". This means that all funds stored on the card is cleared, and the merchant is to return those funds to the customer as cash. Thus, when CashOutIndicator is True the ResponseCashOut property will contain the amount of money the merchant is to return to the customer in cash. The ResponseAuthorizedAmount property will contain the total amount removed from the gift card (The sum of the TransactionAmount plus the ResponseCashOut amount).

Data Type

Boolean

CashRegisterId Property (PTechGiftCard Control)

Cash Register transaction identifier.

Syntax

ptechgiftcardcontrol.CashRegisterId[=string]

Default Value

""

Remarks

The CashRegisterId identifies the cash register initiating this transaction and should be a unique value defined for each of the merchant's registers. The maximum length of this property is 15 characters.

Data Type

String

ClientNumber Property (PTechGiftCard Control)

Merchant configuration property, assigned by Paymentech.

Syntax

ptechgiftcardcontrol.ClientNumber[=string]

Default Value

""

Remarks

The ClientNumber will be supplied to you by Paymentech.

Data Type

String

DuplicateChecking Property (PTechGiftCard Control)

Indicates whether duplicate checking is enabled.

Syntax

ptechgiftcardcontrol.DuplicateChecking[=integer]

Possible Values

duDoNotSendIndicator(0), 
duNoDuplicateChecking(1), 
duErrorOnDuplicate(2), 
duReturnOriginalResponse(3)

Default Value

0

Remarks

This Duplicate Checking Indicator is used to tell the Host whether or not to check for duplicate transactions. This property is not valid for BatchInquiry and BatchRelease transactions.

In order to be viewed as a duplicate, the transaction must be exactly the same as the original. This includes SequenceNumber and TransactionAmount.

Data Type

Integer

EmployeeNumber Property (PTechGiftCard Control)

Identifies the employee making this transaction.

Syntax

ptechgiftcardcontrol.EmployeeNumber[=string]

Default Value

""

Remarks

The EmployeeNumber identifies the operator initiating this transaction and should be a unique value defined for each employee within the client. This field is only required if the merchant participates in a program where operator level reporting is performed. The maximum length of this property is 10 characters.

Data Type

String

IndustryType Property (PTechGiftCard Control)

Determines the merchant's industry type.

Syntax

ptechgiftcardcontrol.IndustryType[=integer]

Possible Values

pitRetail(0), 
pitDirectMarketing(1), 
pitECommerce(2), 
pitRestaurant(3), 
pitHotel(4)

Default Value

0

Remarks

This property sets the merchant's industry type. Valid values are shown in the table below:

* Restaurant orders taken over the phone should be processed as itDirectMarketing transactions. Hotel transactions should always be processed in the itHotel IndustryType. Setting the HotelPreferredCustomer property to True.

Note: Only the itRetail and itRestaurant industry types are supported for Stored Value transactions.

Data Type

Integer

InvoiceNumber Property (PTechGiftCard Control)

Merchant-generated invoice number.

Syntax

ptechgiftcardcontrol.InvoiceNumber[=string]

Default Value

""

Remarks

This property contains a merchant-generated invoice number. This number should be unique for each transaction. The maximum length for this properties varies depending on the IndustryType. For Retail transactions the max length is 6 characters. For Direct Marketing transactions it is 9 characters, and for Electronic Commerce transactions the maximum length is 16 characters. Any text beyond these limits will be truncated by the control.

Data Type

String

MerchantNumber Property (PTechGiftCard Control)

A unique number used to identify the merchant, assigned by Paymentech.

Syntax

ptechgiftcardcontrol.MerchantNumber[=string]

Default Value

""

Remarks

This 12 digit field contains a unique number to identify the merchant to the host.

Data Type

String

PartialRedemption Property (PTechGiftCard Control)

Partial Redemption indicator.

Syntax

ptechgiftcardcontrol.PartialRedemption[=boolean]

Default Value

False

Remarks

If the customer does not have enough on his stored value card to cover the complete cost of the purchase, the merchant may request that the host perform a partial redemption. The stored value card will be used to fund as much of the transaction as possible, and the remainder may be funded by some other form of payment. When PartialRedemption is set to True, the host will supply the actual amount authorized from the stored value card in the ResponseAuthorizedAmount property.

Note that the ResponseAuthorizedAmount will only contain a value if PartialRedemption is set to True, and will remain blank otherwise. If the Stored Value card has a zero ResponseBalance, RedeemCard will fail with a declined message regardless of the value of PartialRedemption.

Data Type

Boolean

Password Property (PTechGiftCard Control)

Password for authentication with the NetConnect Server .

Syntax

ptechgiftcardcontrol.Password[=string]

Default Value

""

Remarks

The Password will be supplied to you by Paymentech.

Data Type

String

PINCapability Property (PTechGiftCard Control)

Indicates if the terminal device supports a PIN pad.

Syntax

ptechgiftcardcontrol.PINCapability[=integer]

Possible Values

ppUnknown(0), 
ppAcceptsPIN(1), 
ppNoPIN(2), 
ppPadInoperative(8), 
ppVerifiedPIN(9)

Default Value

0

Remarks

This property indicates to the host whether the merchant's terminal has a PIN entry pad. Valid values for this property are:

Data Type

Integer

ProxyAuthScheme Property (PTechGiftCard Control)

This property is used to tell the control which type of authorization to perform when connecting to the proxy.

Syntax

ptechgiftcardcontrol.ProxyAuthScheme[=integer]

Possible Values

authBasic(0), 
authDigest(1), 
authProprietary(2), 
authNone(3), 
authNtlm(4), 
authNegotiate(5)

Default Value

0

Remarks

This property is used to tell the control which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (PTechGiftCard Control)

This property tells the control whether or not to automatically detect and use proxy system settings, if available.

Syntax

ptechgiftcardcontrol.ProxyAutoDetect[=boolean]

Default Value

False

Remarks

This property tells the control whether or not to automatically detect and use proxy system settings, if available. The default value is .

Data Type

Boolean

ProxyPassword Property (PTechGiftCard Control)

This property contains a password if authentication is to be used for the proxy.

Syntax

ptechgiftcardcontrol.ProxyPassword[=string]

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (PTechGiftCard Control)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

ptechgiftcardcontrol.ProxyPort[=integer]

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (PTechGiftCard Control)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

ptechgiftcardcontrol.ProxyServer[=string]

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (PTechGiftCard Control)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

ptechgiftcardcontrol.ProxySSL[=integer]

Possible Values

psAutomatic(0), 
psAlways(1), 
psNever(2), 
psTunnel(3)

Default Value

0

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (PTechGiftCard Control)

This property contains a username if authentication is to be used for the proxy.

Syntax

ptechgiftcardcontrol.ProxyUser[=string]

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ResponseApprovalCode Property (PTechGiftCard Control)

Contains an authorization code when a transaction has been approved, or an error code.

Syntax

ptechgiftcardcontrol.ResponseApprovalCode

Default Value

""

Remarks

Contains an authorization code when a transaction has been approved, or an error code. This six character field contains an authorization code when a transaction has been approved. If the ResponseCode returned indicates that the transaction has not been approved, then this field will contain an error code, and the ResponseText property will contain the description. Note that the host does not send back an actual authorization code for Credit Returns. Instead, the host sends back six blank spaces in the authorization code field. Credit VOIDS return the original authorization number.

See the list of errors for this control for more information.

This property is read-only.

Data Type

String

ResponseAuthorizedAmount Property (PTechGiftCard Control)

Used for partial authorizations.

Syntax

ptechgiftcardcontrol.ResponseAuthorizedAmount

Default Value

""

Remarks

Used for partial authorizations. Indicates the actual amount authorized from the stored value card. If the customer does not have enough on his stored value card to cover the complete cost of the purchase, the merchant may request that the host perform a partial redemption. The full stored value card will be used to fund as much of the transaction as possible, and the remainder may be funded by some other form of payment. When PartialRedemption is set to True, the host will supply the actual amount authorized from the stored value card in the ResponseAuthorizedAmount field.

Note that the ResponseAuthorizedAmount will only contain a value if the PartialRedemption property in the authorizing control was set to True. It will remain blank otherwise.

This property is read-only.

Data Type

String

ResponseBalance Property (PTechGiftCard Control)

Balance after this transaction was completed.

Syntax

ptechgiftcardcontrol.ResponseBalance

Default Value

""

Remarks

Balance after this transaction was completed. This property contains the available balance remaining on the card. It is required that this value be printed on the customer's receipt.

This property is read-only.

Data Type

String

ResponseBatchNumber Property (PTechGiftCard Control)

Current open batch number This property is returned after sending a BatchInquiry or BatchRelease transaction with the PTECHHOSTSETTLE control, or after a SendSettlement sent using the PTECHMANUALSETTLE control.

Syntax

ptechgiftcardcontrol.ResponseBatchNumber

Default Value

""

Remarks

Current open batch number This property is returned after sending a BatchInquiry or BatchRelease transaction with the PTechHostSettle control, or after a SendSettlement sent using the PTechManualSettle control.

This property is read-only.

Data Type

String

ResponseCashOut Property (PTechGiftCard Control)

The sum of the TransactionAmount plus the remainder of any value left on the card.

Syntax

ptechgiftcardcontrol.ResponseCashOut

Default Value

""

Remarks

The sum of the TransactionAmount plus the remainder of any value left on the card. When the CashOutIndicator property is set to True, the stored value card will be "cashed out". This means that all funds stored on the card is cleared, and the merchant is to return those funds to the customer as cash. When CashOutIndicator is True, the ResponseCashOut field will contain the amount of money the merchant is to return to the customer in cash. ResponseAuthorizedAmount will contain the total amount removed from the gift card (The sum of the TransactionAmount plus the ResponseCashOut amount).

This property is read-only.

Data Type

String

ResponseCode Property (PTechGiftCard Control)

Indicates the status of the authorization request.

Syntax

ptechgiftcardcontrol.ResponseCode

Default Value

""

Remarks

Indicates the status of the authorization request. This is the property used to determine whether a transaction has been approved or not. Valid values for this property are:

See the list of errors for this control for more information.

This property is read-only.

Data Type

String

ResponseCVVResult Property (PTechGiftCard Control)

Contains the returned CVV result code if it was requested.

Syntax

ptechgiftcardcontrol.ResponseCVVResult

Default Value

""

Remarks

Contains the returned CVV result code if it was requested. If a CVV value was present in the CardCVVData property before authorizing the transaction, this one character field will contain the host returned Card Verification Value result code. Please note that a CVV Result code is never returned for an American Express transaction, even if the CardCVVData property is filled. Instead, an AMEX transaction will be declined if the CVV value does not match, with an ResponseText indicating such. The following is a list of current result codes:

This property is read-only and not available at design time.

Data Type

String

ResponsePreviousBalance Property (PTechGiftCard Control)

Balance before this transaction started.

Syntax

ptechgiftcardcontrol.ResponsePreviousBalance

Default Value

""

Remarks

Balance before this transaction started. This property contains the available balance on the card BEFORE this transaction took place. For instance, if a Stored Value card contains funds in the amount of $50.00, and the TransactionAmount for this authorization was "20.00", the ResponseBalance will contain "30.00" and the ResponsePreviousBalance, if returned, will contain "50.00". This property may or may not be returned by the processor, and is not required to be printed on the customer's receipt.

This property is read-only.

Data Type

String

ResponseRetrievalNumber Property (PTechGiftCard Control)

Reference number returned from the Paymentech host.

Syntax

ptechgiftcardcontrol.ResponseRetrievalNumber

Default Value

""

Remarks

Reference number returned from the Paymentech host. This is the reference number of the transaction as assigned by the Paymentech host. This number must remain with the transaction for the duration of the transaction's life cycle. This information is sent as a parameter in the VoidTransaction method.

If the SettlementMode is set to manual this property will contain the POSRetrievalNumber submitted in the authorization. If no POSRetrievalNumber was sent, this property will contain all zeros, and you will not have a reference number for the transaction.

If the SettlementMode is set to host settle, this property will always contain the Paymentech-generated retrieval number returned by the transaction server, regardless of the value contained in the POSRetrievalNumber property.

In all cases, the ResponseRetrievalNumber will contain the number used to reference the transaction when issuing voids or reversals.

This property is read-only.

Data Type

String

ResponseSequenceNumber Property (PTechGiftCard Control)

SequenceNumber echoed from the authorization.

Syntax

ptechgiftcardcontrol.ResponseSequenceNumber

Default Value

""

Remarks

SequenceNumber echoed from the authorization. After any transaction this property will contain the same value sent in the SequenceNumber property.

This property is read-only.

Data Type

String

ResponseText Property (PTechGiftCard Control)

Approval/Decline/Error text message information This property contains a response or display text message, and is used by the terminal to display the authorization result.

Syntax

ptechgiftcardcontrol.ResponseText

Default Value

""

Remarks

Approval/Decline/Error text message information This field contains a response or display text message, and is used by the terminal to display the authorization result. This property will contain human-readable text indicating whether the transaction was approved or declined, or will contain a description of the error. The actual error code will be returned in the ResponseApprovalCode property. The ResponseText property is for informational use only, and should not be used in determining whether a transaction has been approved or not. Instead, use the ResponseCode property to determine this.

See the list of errors for this control for more information.

This property is read-only.

Data Type

String

ResponseTrace Property (PTechGiftCard Control)

Trace number returned for Stored Value transactions.

Syntax

ptechgiftcardcontrol.ResponseTrace

Default Value

""

Remarks

Trace number returned for Stored Value transactions. This property is returned in the response to a Stored Value card transaction. The returned value is used for transaction tracking purposes, and must be printed on the customer's receipt.

This property is read-only.

Data Type

String

SequenceNumber Property (PTechGiftCard Control)

Sequence number of the transaction.

Syntax

ptechgiftcardcontrol.SequenceNumber[=integer]

Default Value

0

Remarks

This field is user definable and can be used at the users discretion. When submitting any type of transaction for approval, this sequence number may be any numeric value 0 to 2400. This is a purely optional field for the Host Capture SettlementMode, and you may choose to send a unique number or simply send every transaction with zeros. The host will echo the sequence number submitted from the authorization request back in the ResponseSequenceNumber property.

However, if you are processing with the Terminal Capture SettlementMode, SequenceNumber CANNOT remain zero, and must contain a number that is incremented for each transaction you authorized. When it reaches 2400, the SequenceNumber should then start over at 1 again.

Data Type

Integer

Server Property (PTechGiftCard Control)

The URL for the PaymenTech NetConnect server.

Syntax

ptechgiftcardcontrol.Server[=string]

Default Value

"https://netconnect1.chasepaymentech.com/NetConnect/controller"

Remarks

This property contains the server to which all transactions are sent.

Data Type

String

SSLAcceptServerCertEncoded Property (PTechGiftCard Control)

This is the certificate (PEM/Base64 encoded).

Syntax

ptechgiftcardcontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEncoded Property (PTechGiftCard Control)

This is the certificate (PEM/Base64 encoded).

Syntax

ptechgiftcardcontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertStore Property (PTechGiftCard Control)

This is the name of the certificate store for the client certificate.

Syntax

ptechgiftcardcontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (PTechGiftCard Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ptechgiftcardcontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (PTechGiftCard Control)

This is the type of certificate store for this certificate.

Syntax

ptechgiftcardcontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (PTechGiftCard Control)

This is the subject of the certificate used for client authentication.

Syntax

ptechgiftcardcontrol.SSLCertSubject[=string]

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLProvider Property (PTechGiftCard Control)

This specifies the SSL/TLS implementation to use.

Syntax

ptechgiftcardcontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (PTechGiftCard Control)

This is the certificate (PEM/Base64 encoded).

Syntax

ptechgiftcardcontrol.SSLServerCertEncoded

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

TerminalNumber Property (PTechGiftCard Control)

Terminal number assigned by Paymentech.

Syntax

ptechgiftcardcontrol.TerminalNumber[=string]

Default Value

""

Remarks

3-digit field assigned by Paymentech, which identifies the terminal to the host.

Data Type

String

Timeout Property (PTechGiftCard Control)

A timeout for the control.

Syntax

ptechgiftcardcontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TransactionAmount Property (PTechGiftCard Control)

Purchase amount for an authorization.

Syntax

ptechgiftcardcontrol.TransactionAmount[=string]

Default Value

""

Remarks

This field contains the transaction amount to be authorized. The transaction amount is presented in US Dollars with a decimal point in the proper position. If sending a Debit transaction and the customer requests cash back, the TransactionAmount must include the total cost of the purchase, PLUS the DebitCashBack amount.

This must be formatted as a dollar amount with a real decimal point, excluding the dollar sign. For instance "12.00"

Data Type

String

UserId Property (PTechGiftCard Control)

UserId for authentication with the NetConnect Server .

Syntax

ptechgiftcardcontrol.UserId[=string]

Default Value

""

Remarks

The UserId will be supplied to you by PaymenTech.

Data Type

String

ActivateCard Method (PTechGiftCard Control)

Activates a Gift Card.

Syntax

ptechgiftcardcontrol.ActivateCard 

Remarks

Stored value Activation transactions provide merchants the ability to activate a new stored value card on the Chase Paymentech stored value host. Activation transactions can only be performed on cards that have not been previously activated. Activation transactions are usually used by merchants who wish to identify how many new stored value cards have been issued, from the previously activated stored value cards that have had additional value issued. Merchants have the ability to activate stored value cards with a host configured pre-denominated TransactionAmount or activate the cards with a flexible TransactionAmount. With pre-denominated cards, dependent on host configurations, the stored value host will either approve the transaction for the amount that the pre-denominated card is setup for (regardless of the amount keyed), or decline the transaction if the amount keyed at the Point-of-Sale if the amount doesn't match the amount identified on the card.

This transaction is automatically added to the current open batch, and will be settled when the PTechHostSettle control's BatchRelease method is called.

The gift card may be specified by either a CardMagneticStripe returned by a card reader, (Track2 only), or manually entered through the CardNumber, CardExpMonth, and CardExpYear.A 3-digit Card Verification Value code may also be supplied in the CardCVVData property.

The ResponseCode and ResponseText properties indicate whether this transaction was successful.

Note: Activation transactions will fail at the stored value host if the card has been previously activated or has previously had value issued to it. Also, ActivateCard cannot be used to activate a card that has been deactivated via the DeactivateCard method. You must use the ReactivateCard method instead.

AddValue Method (PTechGiftCard Control)

Activates and/or adds funds to a Gift Card.

Syntax

ptechgiftcardcontrol.AddValue 

Remarks

AddValue transactions allows a merchant to issue or add value to a stored value card at the host. This transaction can be used on both new and existing stored value cards. The AddValue transaction can be used in place of an ActivateCard transaction.

AddValue transactions can be performed on a stored value card more than once over the lifetime of the card, as the cardholder chooses to "reload" the card.

Merchants have the ability to issue stored value cards with a host configured pre-denominated amount, or issue the cards with a flexible transaction amount. With pre-denominated cards, based on the selections indicated at sign-up, the stored value host will either approve the transaction for the amount that the pre-denominated card is setup for (regardless of the amount keyed), or decline the transaction if the amount keyed at the Point Of Sale doesn't match the amount identified on the card.

This transaction is automatically added to the current open batch, and will be settled when the PTechHostSettle control's BatchRelease method is called.

The gift card may be specified by either a CardMagneticStripe returned by a card reader, (Track2 only), or manually entered through the CardNumber, CardExpMonth, and CardExpYear.A 3-digit Card Verification Value code may also be supplied in the CardCVVData property.

The ResponseCode and ResponseText properties indicate whether this transaction was successful.

BalanceInquiry Method (PTechGiftCard Control)

Retrieves the balance remaining on a gift card.

Syntax

ptechgiftcardcontrol.BalanceInquiry 

Remarks

A BalanceInquiry transaction requests that the host return the quantity of funds remaining in the customer's Stored Value (Gift) Card. This transaction is not added to the batch and cannot be settled by the PTechHostSettle control. No charge is made to the customer's gift card.

The gift card may be specified by either a CardMagneticStripe returned by a card reader, (Track2 only), or manually entered through the CardNumber, CardExpMonth, and CardExpYear.A 3-digit Card Verification Value code may also be supplied in the CardCVVData property.

The ResponseCode and ResponseText properties indicate whether this transaction was successful. The ResponseBalance property will contain the card's current balance.

Config Method (PTechGiftCard Control)

Sets or retrieves a configuration setting.

Syntax

ptechgiftcardcontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DeactivateCard Method (PTechGiftCard Control)

Deactivates a gift card.

Syntax

ptechgiftcardcontrol.DeactivateCard 

Remarks

A stored value Deactivation transaction is the process of removing the remaining balance from a card account and placing the card into an inactive status. This transaction is most often used when the cardholder has lost the card, yet still has the card number. The terminal will initiate a transaction to the host, which will redeem the total balance on the card. Once a card is deactivated, it can only be restored to circulation using the ReactivateCard method. Calling AddValue on a deactivated card will result in an error.

The gift card may be specified by either a CardMagneticStripe returned by a card reader, (Track2 only), or manually entered through the CardNumber, CardExpMonth, and CardExpYear.A 3-digit Card Verification Value code may also be supplied in the CardCVVData property.

The ResponseCode and ResponseText properties indicate whether this transaction was successful.

Interrupt Method (PTechGiftCard Control)

Interrupt the current method.

Syntax

ptechgiftcardcontrol.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ReactivateCard Method (PTechGiftCard Control)

Re-activates Gift Card that has been previously deactivated.

Syntax

ptechgiftcardcontrol.ReactivateCard 

Remarks

This method re-activates and returns to circulation a Gift Card that was deactivated through the DeactivateCard method. Note that any balance that was present before the card was deactivated is lost, and the card starts fresh with a $0.00 balance. You must specify a TransactionAmount to initialize the reactivated card with funds (you cannot reactivate a card with a $0.00 TransactionAmount).

The gift card may be specified by either a CardMagneticStripe returned by a card reader, (Track2 only), or manually entered through the CardNumber, CardExpMonth, and CardExpYear.A 3-digit Card Verification Value code may also be supplied in the CardCVVData property.

The ResponseCode and ResponseText properties indicate whether this transaction was successful.

RedeemCard Method (PTechGiftCard Control)

Deducts funds from a gift card for the purchase of goods or services.

Syntax

ptechgiftcardcontrol.RedeemCard 

Remarks

A Redemption transaction is the process of deducting value from the Gift Card, and is very similar to a Credit Card Sale transaction, except that funds are immediately removed from the balance of the gift card. RedeemCard requests that the host verify and remove funds from the cardholder's Stored Value (Gift) Card. This transaction is automatically added to the current open batch, and will be settled when the PTechHostSettle control's BatchRelease method is called.

The gift card may be specified by either a CardMagneticStripe returned by a card reader, (Track2 only), or manually entered through the CardNumber, CardExpMonth, and CardExpYear.A 3-digit Card Verification Value code may also be supplied in the CardCVVData property.

The ResponseCode and ResponseText properties indicate whether this transaction was successful. The host will return either an approval if the card has the requested value, or a decline if the card has less than the requested value.

If the merchant allows it, at the time of purchase a customer my Cash Out his gift card, and receive the remainder of the gift card's stored value as cash. To cash out a gift card, set the CashOutIndicator to True before calling RedeemCard. The change to be returned to the customer (The gift card's total value minus the TransactionAmount) will be returned in ResponseCashOut, and the ResponseBalance will be "0.00".

In the case that the customer's gift card does not have enough funds to cover the entire TransactionAmount, the merchant may request that the host perform a Partial Redemption. With PartialRedemption set to True, the Point of Sale is capable of processing a Redemption transaction for more than the card balance and still receive an approval. All of the funds remaining on the gift card will be put towards the TransactionAmount, and the merchant will be required to obtain an additional form of payment for the remaining balance. The amount actually removed from the card will be returned in ResponseAuthorizedAmount, and the customer's receipt should indicate the remaining amount (TransactionAmount - ResponseAuthorizedAmount) due.

Reset Method (PTechGiftCard Control)

Clears all properties to their default values.

Syntax

ptechgiftcardcontrol.Reset 

Remarks

This method clears all properties to their default values.

VoidTransaction Method (PTechGiftCard Control)

Voids a transaction in the current batch.

Syntax

ptechgiftcardcontrol.VoidTransaction RetrievalNumberToVoid, LastRetrievalNumber

Remarks

A stored value Void transaction allows the removal of a transaction from the open batch in the terminal. The void will communicate to the stored value host so that the host can reverse the requested stored value transaction.

The VoidTransaction method has two parameters, RetrievalNumberToVoid and LastRetrievalNumber. RetrievalNumberToVoid is the ResponseRetrievalNumber of the transaction you wish to void. LastRetrievalNumber should be set to the last ResponseRetrievalNumber received from the Paymentech Server. If LastRetrievalNumber is left blank, the contents of the ResponseRetrievalNumber property will be used instead.

Before sending a void, you must make sure that the CardNumber property contains the card number from the original transaction. For example:

control.CardNumber = "4444333322221111" control.CardExpMonth = 1 control.CardExpYear = 2010 control.TransactionAmount = "1.00" control.RedeemCard() cnumToVoid = control.CardNumber refNumToVoid = control.ResponseRetrievalNumber ... more sale transactions ... 'All that's needed for a void: control.SequenceNumber = control.SequenceNumber + 1 control.CardNumber = cnumToVoid control.VoidTransaction(refNumToVoid, control.ResponseRetrievalNumber)

In the above void, if you use a new instance of the control or otherwise reset it's state, you must set the LastRetrievalNumber parameter as well.

Note: Voids cannot be performed on BalanceInquiry or Forced transactions.

DataPacketIn Event (PTechGiftCard Control)

Fired when receiving a data packet from the transaction server.

Syntax

Sub ptechgiftcardcontrol_DataPacketIn(DataPacket As String)

Remarks

This event fires when a packet is received. The entire data packet (including all framing and error detection characters) is contained in the parameter "DataPacket". This parameter may be inspected for advanced troubleshooting, or to extract additional response properties beyond the scope of this control.

DataPacketOut Event (PTechGiftCard Control)

Fired when sending a data packet to the transaction server.

Syntax

Sub ptechgiftcardcontrol_DataPacketOut(DataPacket As String)

Remarks

This event fires right before each data packet is sent. The entire data packet (including all framing and error detection characters) is contained in the parameter "DataPacket". This parameter may be inspected for advanced troubleshooting.

Error Event (PTechGiftCard Control)

Information about errors during data delivery.

Syntax

Sub ptechgiftcardcontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (PTechGiftCard Control)

Fired after the server presents its certificate to the client.

Syntax

Sub ptechgiftcardcontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (PTechGiftCard Control)

Fired when secure connection progress messages are available.

Syntax

Sub ptechgiftcardcontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Config Settings (PTechGiftCard Control)

PTechGiftCard Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (PTechGiftCard Control)

PTechGiftCard Errors

Paymentech Server Errors:

The following is a list of error codes which may be returned by the Paymentech Server. In the case of a server-side error condition, the ResponseCode property will contain "E", the error code will be contained in the ResponseApprovalCode property, and the description in ResponseText

Paymentech Issuer Errors

Paymentech Format Errors

Paymentech Host / Setup Errors

Paymentech Debit / EBT Specific Errors

Paymentech Batch Management Errors (use the ErrorCode configuration setting to retrieve this information from the PTechHostSettle control.

The control may also return one of the following error codes, which are inherited from other controls.

HTTP Errors

The control may also return one of the following error codes, which are inherited from other controls.

TCPClient Errors

SSL Errors

TCP/IP Errors