UPSRates Class

Properties   Methods   Events   Config Settings   Errors  

Provides domestic or international rates based on weight, service, and origin/destination information.

Syntax

class dshippingsdk.UPSRates

Remarks

Rates class provides automated online access to domestic and international rate information and is capable also of rating shipments containing multiple packages. Based on the shipment's input characteristics (origin, destination, shipment weight, special services, etc.), the class provides a list of all applicable UPS services and their respective published rates.

For all shipments inside or between the U.S. and Puerto Rico:

The request that is sent to UPS server must provide details at the package level. For shipments consisting of only one package, the class identifies all the available UPS domestic and international services and returns shipping rates based on the package's specifications. If the shipment consists of two or more packages, the class will return a separate rate for each package and the rate for the total shipment. The total shipment rate will be a sum of the rates for all packages.

For all shipments outside the U.S. and Puerto Rico:

The request must provide details at the shipment level. For shipments consisting of one or more packages, the class will return one rate for all packages at the shipment level (not at the package level).

To retrieve a list of rates for all services applicable to your shipment, the requested_service must be set to 0 (stUnspecified) when calling get_rates method. To get a rate for a specified service, the requested_service must be set to the corresponding value of the UPS service to be rated (other than 0: stUnspecified).

In either scenario, UPS server response will contain negotiated rate(s) only for the qualified ups_account_numbers. If the user is authorized for negotiated rates, and if negotiated rates apply to the particular service, UPS returns those rates along with the published rates in its response. Otherwise, a warning message might be returned that indicates ineligibility and only the published rates are returned in the response. For more information on negotiated rates, including authorization to receive them, please check with your UPS account representative.

Please note that shipping rates retrieved by this class are estimates based on the information supplied. Other shipping charges may apply and the final shipping charge may differ depending upon your UPS Account Number and how the package is tendered to UPS.

Property List

---

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

account_address1 Property

Street name.

Syntax

def get_account_address1() -> str: ...
def set_account_address1(value: str) -> None: ...

account_address1 = property(get_account_address1, set_account_address1)

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS account_address1 should not exceed 35 characters.

account_address2 Property

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

def get_account_address2() -> str: ...
def set_account_address2(value: str) -> None: ...

account_address2 = property(get_account_address2, set_account_address2)

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS account_address2 should not exceed 35 characters.

account_city Property

Name of city, town, etc.

Syntax

def get_account_city() -> str: ...
def set_account_city(value: str) -> None: ...

account_city = property(get_account_city, set_account_city)

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

account_country_code Property

Country code.

Syntax

def get_account_country_code() -> str: ...
def set_account_country_code(value: str) -> None: ...

account_country_code = property(get_account_country_code, set_account_country_code)

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

account_state Property

State or province code.

Syntax

def get_account_state() -> str: ...
def set_account_state(value: str) -> None: ...

account_state = property(get_account_state, set_account_state)

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

account_zip_code Property

Postal code.

Syntax

def get_account_zip_code() -> str: ...
def set_account_zip_code(value: str) -> None: ...

account_zip_code = property(get_account_zip_code, set_account_zip_code)

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both account_city and account_state are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

cod_total_amount Property

The total amount to be collected on shipment level.

Syntax

def get_cod_total_amount() -> str: ...
def set_cod_total_amount(value: str) -> None: ...

cod_total_amount = property(get_cod_total_amount, set_cod_total_amount)

Default Value

""

Remarks

This indicates customer's input COD amount (prior to any accumulations: total collection amount minus transportation charges).

For MPS COD shipments (when packages is greater than 1), the COD amount must be included on each package that uses COD service by setting the package_cod_amount.

Format: Two explicit decimals (e.g.5.00).

cod_type Property

The code that indicates the type of funds that will be used for the COD payment.

Syntax

def get_cod_type() -> int: ...
def set_cod_type(value: int) -> None: ...

cod_type = property(get_cod_type, set_cod_type)

Default Value

0

Remarks

This property identifies the type of funds UPS should collect upon shipment delivery. It is required to be provided in the request only if COD is requested (i.e., cod_total_amount is set to a value other than "0.00").

Valid values are:

Note: COD special service is not valid for return service movements.

customer_type Property

Customer classification code.

Syntax

def get_customer_type() -> int: ...
def set_customer_type(value: int) -> None: ...

customer_type = property(get_customer_type, set_customer_type)

Default Value

4

Remarks

The customer_type is applicable only if sender_country_code is US. The rates depend on the combination of pickup_type and customer_type.

Valid values are:

disclaimer Property

Disclaimer text.

Syntax

def get_disclaimer() -> str: ...

disclaimer = property(get_disclaimer, None)

Default Value

""

Remarks

The disclaimer is a conditional statement about the validity of the service being guaranteed, based on the sender_country_code and recipient_country_code. If applicable, this property is filled after a call to the get_shipping_time.

Service Guaranteed Disclaimers

This property is read-only.

duty_type Property

Auto duty type applicable for requests outside the US.

Syntax

def get_duty_type() -> str: ...

duty_type = property(get_duty_type, None)

Default Value

"Dutiable"

Remarks

The duty is automatically calculated in such requests if the Documents is set to False. This is returned in the server response only for requests outside the US.

The possible values to be returned:

All US domestic letters and documents are Non-Dutiable.

For non-documents the following logic applies:

• a. When export and import countries are the same, duty type is Non-Dutiable;
• b. All European transborder shipments (country pair must be found on DGTM TBL #462) are Non-Dutiable;
• c. If not found in step b, the duty type is assigned from the first value larger or equal to the converted customs declared value (order by declared value ascending) for that import country;
• If not found, default the duty type to Dutiable;

Note: When processing auto duty logic and for any reason the program experiences problems getting the duty type, the duty type will be defaulted to Dutiable. If the CurrencyCode is the same as the import currency code, there will be no currency conversion and the entered value will be used in the determination of the auto duty logic.

This property is read-only.

firewall_auto_detect Property

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Syntax

def get_firewall_auto_detect() -> bool: ...
def set_firewall_auto_detect(value: bool) -> None: ...

firewall_auto_detect = property(get_firewall_auto_detect, set_firewall_auto_detect)

Default Value

FALSE

Remarks

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

firewall_type Property

This property determines the type of firewall to connect through.

Syntax

def get_firewall_type() -> int: ...
def set_firewall_type(value: int) -> None: ...

firewall_type = property(get_firewall_type, set_firewall_type)

Default Value

0

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

firewall_host Property

This property contains the name or IP address of firewall (optional).

Syntax

def get_firewall_host() -> str: ...
def set_firewall_host(value: str) -> None: ...

firewall_host = property(get_firewall_host, set_firewall_host)

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a firewall_host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.

firewall_password Property

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

def get_firewall_password() -> str: ...
def set_firewall_password(value: str) -> None: ...

firewall_password = property(get_firewall_password, set_firewall_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If firewall_host is specified, the firewall_user and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

firewall_port Property

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

def get_firewall_port() -> int: ...
def set_firewall_port(value: int) -> None: ...

firewall_port = property(get_firewall_port, set_firewall_port)

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall firewall_host. See the description of the firewall_host property for details.

Note: This property is set automatically when firewall_type is set to a valid value. See the description of the firewall_type property for details.

firewall_user Property

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

def get_firewall_user() -> str: ...
def set_firewall_user(value: str) -> None: ...

firewall_user = property(get_firewall_user, set_firewall_user)

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the firewall_host is specified, this property and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

package_count Property

The number of records in the Package arrays.

Syntax

def get_package_count() -> int: ...
def set_package_count(value: int) -> None: ...

package_count = property(get_package_count, set_package_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• package_base_charge
• package_cod_amount
• package_cod_type
• package_height
• package_insured_value
• package_length
• package_net_charge
• package_rating_aggregate
• package_signature_type
• package_special_services
• package_total_surcharges
• package_type
• package_weight
• package_width

The array indices start at 0 and end at package_count - 1.

package_base_charge Property

Actual Base Charge applicable to this package.

Syntax

def get_package_base_charge(package_idx: int) -> str: ...

Default Value

""

Remarks

Actual Base Charge applicable to this package.

For FedEx, this is normally specific to the payor_account_number. It is used in the FedExShip and FedExShipIntl only. When this is used, please note that for MPS the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on the package level. In this case, the properties that store the rating information: package_base_charge, package_net_charge, package_total_surcharges, and package_total_discount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in the last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

For UPS, this is the "transportation charge - fuel surcharge" applicable to this package. Upon a successful response, this is returned in the server reply for each package included in the shipment if SubVersion is 1701 or greater.

This is not applicable to USPS.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

This property is read-only.

package_cod_amount Property

The COD monetary value for the package.

Syntax

def get_package_cod_amount(package_idx: int) -> str: ...
def set_package_cod_amount(package_idx: int, value: str) -> None: ...

Default Value

""

Remarks

The COD monetary value for the package.

For FedEx, this is applicable and required for Ground shipments only. If the shipment is using COD special service (i.e., the shipment_special_services is set to the corresponding value of COD), then the COD amount should be specified on package level for all packages that are going to use COD. If this is set, then the package will be considered as using the COD service.

Since Ground packages do not travel together and may be delivered at different times, you should add the value for the individual packages to be collected. On MPS Ground shipments, a COD return label will be generated for each package that uses COD service (stored in package_cod_label).

On COD Express shipments, the COD amount should be specified on shipment level and the CODTotalAmount is required instead.

For UPS, if the package_cod_amount is set to a value other than "0.00", it indicates that COD special service is requested for that package. The collection type should be specified in the request via the package_cod_type. COD special service is not valid for return service movements. Package level COD is available for shipment from US/PR to US/PR, CA to CA, and CA to US. COD service for shipment from CA to US is not allowed for package_type Letter/Envelope. COD special service is available for shipper's with pickup_type 'Daily Pickup' or 'Drop Shipping'. Delivery Confirmation (represented by package_signature_type) and COD cannot coexist on a single package.

This property is not applicable to USPS packages.

Format: Two explicit decimal positions (e.g. 100.00).

This is not applicable for Canada Post.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_cod_type Property

The code that indicates the type of funds that will be used for the COD payment for this package.

Syntax

def get_package_cod_type(package_idx: int) -> int: ...
def set_package_cod_type(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

The code that indicates the type of funds that will be used for the COD payment for this package.

This property is only applicable to FedEx and UPS and identifies the type of funds that should be collected upon package delivery. It is required to be provided in the request only if COD is requested for this package (i.e., package_cod_amount is set to a value other than "0.00").

Valid values are:

Note: COD special service is not valid for return service movements.

Also note that only codtpAny (0) and codtGuaranteedFunds (2) are valid for UPS. For CanadaPost codtpAny is not valid and any type of check is accepted.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_height Property

The height of the package to be shipped.

Syntax

def get_package_height(package_idx: int) -> int: ...
def set_package_height(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

The height of the package to be shipped.

For FedEx, the package_height is optional, but recommended, if "Your Packaging" is used as package_packaging_type. This is required if package_length and package_width are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When package_width is provided in the request, then all other dimensions (package_length and package_height) are to be set as well.

For USPS, this only applies to get_rates and is only required if the package is irregular and the package_packaging_type property is set to ptNonRectangular. (In this case package_width and package_height must still be set). For parcels, package_length is the measurement of the longest dimension and package_width and package_height make up the other two dimensions. package_girth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the package_length, package_width, and package_height are required for Priority Mail packages when the package_size is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the Shortest dimension (3.1 digits e.g. 999.9 pattern).

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_insured_value Property

Amount of insurance requested for this package.

Syntax

def get_package_insured_value(package_idx: int) -> str: ...
def set_package_insured_value(package_idx: int, value: str) -> None: ...

Default Value

""

Remarks

Amount of insurance requested for this package. The value has 2 explicit decimal position and has a maximum of 11 characters including the decimal.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_length Property

The length of the package to be shipped.

Syntax

def get_package_length(package_idx: int) -> int: ...
def set_package_length(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

The length of the package to be shipped.

For FedEx, the package_length is optional, but recommended, if "Your Packaging" is used as package_packaging_type. This is required if package_width and package_height are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments. Length must be the longest dimension of the container.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When package_width is provided in the request, then all other dimensions (package_length and package_height) are to be set as well.

Valid values are 0 to 108 IN and 0 to 270 CM.

For USPS, this is only required if the package is irregular and the package_packaging_type property is set to ptNonRectangular. (In this case package_width and package_height must still be set).

Note: For parcels, the package_length is the measurement of the longest dimension and package_width and package_height make up the other two dimensions. package_girth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the package_length, package_width, and package_height are required for Priority Mail packages when the package_size is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the longest dimension (3.1 digits e.g. 999.9 pattern).

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_net_charge Property

Actual Net Charge applicable to this package.

Syntax

def get_package_net_charge(package_idx: int) -> str: ...
def set_package_net_charge(package_idx: int, value: str) -> None: ...

Default Value

""

Remarks

Actual Net Charge applicable to this package.

For FedEx, this is normally specific to the payor_account_number. It is used in the FedExShip and FedExShipIntl classs only.

When this is used, please note that for MPS the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the properties that store the rating information: package_base_charge, package_net_charge, package_total_surcharges, and package_total_discount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

For UPS, upon a successful response to get_rates, this is returned in the server reply for each package included in the shipment.

For USPS, this specifies the postage required for mailing a package of the indicated size and weight. If this property is not supplied, it will be calculated and returned in the response.

This will also be set when an Endicia label is returned describing how much postage was charged from the Endicia account for the package.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_type Property

The packaging type of the package being rated and/or shipped.

Syntax

def get_package_type(package_idx: int) -> int: ...
def set_package_type(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

The packaging type of the package being rated and/or shipped.

Possible values are:

If this is set to a value that is not applicable to a certain provider, it will automatically be set to ptNone (0).

For FedEx, this is required in a ship request when either the get_package_label or get_shipment_labels method is called. FedEx only supports one packaging type for the whole shipment, so only the package_packaging_type for the first package is used in label requests.

If the package_packaging_type is set to 31 (Your Packaging), then the dimensions of the package should be provided in the request by setting the following: package_length, package_width, and package_height.

If the service_type is set to any of the FedEx Ground services (Ground or Ground Home Delivery), then the package_packaging_type will be automatically set to 31 (Your Packaging).

Please note that the types pt10kgBox (13) and pt25kgBox (14) are only meant for international shipments and domestic shipments outside of the United States.

For UPS, please note that when selecting package_packaging_type make sure this is valid for all the following: sender_country_code, recipient_country_code, service_type, and all special services requested at both shipment and package level.

Also the following restrictions apply when using UPS Mail Innovations:

For USPS, this is used for getting rates and Endicia labels. For international shipments, the only valid values are: ptRectangular and ptNonRectangular.

For Canada Post, ptLetter (2) is only applicable if theContractId is set.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_rating_aggregate Property

Rating aggregate applicable to this package.

Syntax

def get_package_rating_aggregate(package_idx: int) -> str: ...

Default Value

""

Remarks

Rating aggregate applicable to this package.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

This property is read-only.

package_signature_type Property

Specifies one of the Delivery Signature Options requested for this package.

Syntax

def get_package_signature_type(package_idx: int) -> int: ...
def set_package_signature_type(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies one of the Delivery Signature Options requested for this package. Possible values are:

For FedEx Express shipments, the NoSignatureRequired option will not be allowed when the following special services are requested: Alcohol, Hold At Location or Dangerous Goods.

For residential FedEx Ground International shipments from Canada to the U.S., two valid signature options are allowed: NoSignatureRequired and Direct.

The impact of signature options fees may vary depending on your agreement with FedEx. Following are the definitions for FedEx:

• Service Default: In this case, the appropriate signature option will be selected for your shipping service. For example, if the package contains Dangerous Goods, the Direct signature option is chosen for you. The actual signature option applied to this package could be different than the signature option requested if a conflict occurred with other service features in the package. In this case, the value set in the request will be ignored.
• Indirect Signature Required: Indicates that an indirect signature is required upon delivery. This is allowed to residential addresses only. In this case, FedEx obtains a signature in one of three ways: from any person at the delivery address, from a neighbor, building manager, or other person at a neighboring address. The recipient can sign a FedEx door tag authorizing release of the package without anyone present. This might affect the shipping rates and/or service availability.
• Direct Signature Required: Indicates that a direct signature is required upon delivery. In this case, FedEx obtains a signature from any person at the delivery address. If no one is at the address, FedEx will reattempt delivery; Direct Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This option is not available for Hold at FedEx Location shipments. This might affect the shipping rates and/or service availability.
• Adult Signature Required: Indicates that the adult signature is required upon delivery. In this case, FedEx obtains a signature from any person at least 21 years old (government-issued photo identification required) at the delivery address. If no one is at the address, FedEx will reattempt delivery. Adult Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This might affect the shipping rates and/or service availability.

Note: In the server reply, this option may differ from that requested value due to other characteristics of the shipment.

For UPS, when delivery confirmation is requested for a package, the package_signature_type should be set to a value other than 0 (stServiceDefault). The availability of this special service depends on the service_type. The type stIndirect is not valid for UPS packages.

Also, when using UPS Mail Innovations, delivery confirmation can be requested by setting this to stUSPSDeliveryConfirmation.

Delivery Confirmation and COD cannot coexist on a single package. Also, Delivery Confirmation option cannot be combined with the Return Services option.

For USPS, if this is not set to stServiceDefault or stNoSignatureRequired, the Signature Confirmation service will be used. Also, for Express label shipments, set this to stNoSignatureRequired to waive the signature requirements.

This does not apply for Canada Post.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_special_services Property

Contains the collection of special services offered on the package level.

Syntax

def get_package_special_services(package_idx: int) -> int: ...
def set_package_special_services(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

Contains the collection of special services offered on the package level. Valid values are:

For FedEx, to request any of the special services offered for a particular package in a ship request, you must set the package_special_services of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below for FedEx:

• Appointment Delivery: Indicates that the appointment delivery special service is requested for this package. This might affect the shipping rates and/or service availability.
• Dangerous Goods: Indicates that this package contains dangerous goods. When the package_special_services contains this flag, then the package_dangerous_goods_accessible is required to be provided in the request as well. For FedEx Express services, these types of shipments are referred to as dangerous goods shipments. For FedEx Ground services, these types of shipments are referred to as hazardous materials (Hazmat) shipments. Hazmat shipments must be single package. FedEx Ground provides reliable delivery of hazardous materials in all U.S. states except Alaska and Hawaii. If you have not shipped hazardous materials with FedEx Ground before, contact your FedEx account executive first. FedEx needs to confirm that you have met government training requirements and can generate the documentation your shipments need. Additional information regarding hazardous materials shipping is provided at fedex.com/ us/services/options under the Hazardous Materials link. The Shipper's Hazardous Materials Certification report (OP-950), prints after a successful Ground close request. Please note that Hazmat shipments must be single package. If you create a multiple package (MPS) hazmat shipment, only one commodity prints on the OP-950. FedEx assesses a surcharge on each package containing dangerous goods/Hazmat materials. This might affect service availability as well.
• Dry Ice: Indicates that this package contains dry ice. FedEx assesses a surcharge on each package containing dry ice. This might affect service availability as well.
• Priority Alert: Indicates whether the priority alert special service is requested for this package. This is applicable to domestic shipments only. A per package surcharge is associated with Priority Alert. This is applicable for FedEx First Overnight and FedEx Priority Overnight. It can be associated with: Saturday Delivery, Hold Saturday, Hold at Location, Dangerous Goods, Dry Ice or Signature Service Option. Please note that Priority Alert requires a service contract. If you are interested in signing up for Priority Alert, contact your FedEx account executive.
• Non Standard Container: Indicates whether this package type is a non standard container. This might affect the shipping rates and/or service availability.
• COD: Indicates that this is a COD package. This service will affect shipping rates and service availability. This is applicable for domestic FedEx Express and Ground services, except FedEx Home Delivery premium. When shipping COD via FedEx Ground, the package_cod_amount and package_cod_type must also be provided in the request.

For UPS, to request any of the special services offered for a particular package in a rate or ship request, you must set the package_special_services of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below:

• Additional Handling: Indicates that additional handling special service is requested for this package. This might affect the shipping rates and/or service availability.
• Non Standard Container: Indicates whether this package type is to be considered a large package (a non standard container). Dimensions must be 130 to 165 inches: Length + (2 x Width) + (2 x Height). This might affect the shipping rates and/or service availability.

Some other special services on package level, such as COD, Delivery Confirmation, Insured Value, are already implemented respectively through the package_cod_amount and package_cod_type, package_signature_type, and package_insured_value.

This property is not applicable to USPS or Canada Post.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_total_surcharges Property

Total Actual Surcharges applicable to this package.

Syntax

def get_package_total_surcharges(package_idx: int) -> str: ...

Default Value

""

Remarks

Total Actual Surcharges applicable to this package.

For FedEx, this is normally specific to the payor_account_number. It is used in the FedExShip and FedExShipIntl classs only.

Please note that for MPS, the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the properties that store the rating information: package_base_charge, package_net_charge, package_total_surcharges, and package_total_discount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

For UPS, upon a successful response, this is returned in the server reply for each package included in the shipment.

This does not apply to USPS packages.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

This property is read-only.

package_weight Property

Weight of this package.

Syntax

def get_package_weight(package_idx: int) -> str: ...
def set_package_weight(package_idx: int, value: str) -> None: ...

Default Value

"0.0"

Remarks

Weight of this package.

For FedEx, this is required to be provided in the request. It requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

For UPS, this is required to be provided in the request for each package contained in the shipment if package_packaging_type is set to a value other than 0 (UPS Letter). For Ground shipments, if the actual weight is less than 150 pounds, then the billable weight is 150 pounds. Air and 3 Day Select shipments will not be subject to a minimum billable weight. Format: it requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

Note that if the service_type stUPSSurePostLessThan1LB or stUPSFirstClassMail is used, or the service_type stUPSExpeditedMailInovations is used with the package_packaging_type ptMachineables, ptIrregulars, or ptStandardFlat then the weight must be specified in ounces. The WeightUnit config will be set automatically to "OZS" if not set.

For USPS, this must be the weight in pounds and ounces of the package. Package weight cannot exceed 70 pounds. (First-Class Mail cannot exceed 13 ounces. Bound Printed Matter cannot exceed 15 pounds). On international shipments, weight limits vary by country.

The format must be in "N lbs N oz", or as an integer showing the number of ounces. For example, a package with weight 6 lbs, 8 oz can be specified as "6 lbs 8 oz" or as "104".

However, in USPS, if postage_provider is set to ppEndicia, then the format must be one explicit decimal position in ounces (i.e. N.N formatting).

For Canada Post, the weight of the parcel should be specified in kilograms (e.g. 99.999).

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_width Property

The width of the package to be shipped.

Syntax

def get_package_width(package_idx: int) -> int: ...
def set_package_width(package_idx: int, value: int) -> None: ...

Default Value

0

Remarks

The width of the package to be shipped.

For FedEx, the package_width is optional, but recommended, if "Your Packaging" is used as package_packaging_type. This is required if package_length and package_height are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When package_width is provided in the request, then all other dimensions (package_length and package_height) are to be set as well.

For USPS, this is only required if the package is irregular and the package_packaging_type property is set to ptNonRectangular. (In this case package_width and package_height must still be set).

Note: For parcels, package_length is the measurement of the longest dimension and package_width and package_height make up the other two dimensions. package_girth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the package_length, package_width, and package_height are required for Priority Mail packages when the package_size is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the second longest dimension (3.1 digits e.g. 999.9 pattern).

The package_idx parameter specifies the index of the item in the array. The size of the array is controlled by the package_count property.

package_service_index Property

The service index in the list of available services returned.

Syntax

def get_package_service_index() -> int: ...
def set_package_service_index(value: int) -> None: ...

package_service_index = property(get_package_service_index, set_package_service_index)

Default Value

0

Remarks

To retrieve all rating attributes on package level (package_base_charge, package_total_surcharges, package_net_charge, and package_rating_aggregate) you must set the package_service_index from 0 to ServiceCount - 1 for each PackageIndex from 0 to PackageCount - 1.

pickup_type Property

Pickup type used for the shipment that rate is requested for.

Syntax

def get_pickup_type() -> int: ...
def set_pickup_type(value: int) -> None: ...

pickup_type = property(get_pickup_type, set_pickup_type)

Default Value

0

Remarks

The rates depend on the combination of pickup_type and customer_type.

Valid values are:

proxy_auth_scheme Property

This property is used to tell the class which type of authorization to perform when connecting to the proxy.

Syntax

def get_proxy_auth_scheme() -> int: ...
def set_proxy_auth_scheme(value: int) -> None: ...

proxy_auth_scheme = property(get_proxy_auth_scheme, set_proxy_auth_scheme)

Default Value

0

Remarks

This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the proxy_user and proxy_password properties are set.

proxy_auth_scheme should be set to authNone (3) when no authentication is expected.

By default, proxy_auth_scheme is authBasic (0), and if the proxy_user and proxy_password properties are set, the component will attempt basic authentication.

If proxy_auth_scheme is set to authDigest (1), digest authentication will be attempted instead.

If proxy_auth_scheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If proxy_auth_scheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of proxy_user and proxy_password.

proxy_auto_detect Property

This property tells the class whether or not to automatically detect and use proxy system settings, if available.

Syntax

def get_proxy_auto_detect() -> bool: ...
def set_proxy_auto_detect(value: bool) -> None: ...

proxy_auto_detect = property(get_proxy_auto_detect, set_proxy_auto_detect)

Default Value

FALSE

Remarks

This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is False.

proxy_password Property

This property contains a password if authentication is to be used for the proxy.

Syntax

def get_proxy_password() -> str: ...
def set_proxy_password(value: str) -> None: ...

proxy_password = property(get_proxy_password, set_proxy_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If proxy_auth_scheme is set to Basic Authentication, the proxy_user and proxy_password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If proxy_auth_scheme is set to Digest Authentication, the proxy_user and proxy_password properties are used to respond to the Digest Authentication challenge from the server.

If proxy_auth_scheme is set to NTLM Authentication, the proxy_user and proxy_password properties are used to authenticate through NTLM negotiation.

proxy_port Property

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

def get_proxy_port() -> int: ...
def set_proxy_port(value: int) -> None: ...

proxy_port = property(get_proxy_port, set_proxy_port)

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy proxy_server (default 80). See the description of the proxy_server property for details.

proxy_server Property

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

def get_proxy_server() -> str: ...
def set_proxy_server(value: str) -> None: ...

proxy_server = property(get_proxy_server, set_proxy_server)

Default Value

""

Remarks

If a proxy proxy_server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the proxy_server property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the proxy_server property is set to the corresponding address. If the search is not successful, an error is returned.

proxy_ssl Property

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

def get_proxy_ssl() -> int: ...
def set_proxy_ssl(value: int) -> None: ...

proxy_ssl = property(get_proxy_ssl, set_proxy_ssl)

Default Value

0

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

proxy_user Property

This property contains a username if authentication is to be used for the proxy.

Syntax

def get_proxy_user() -> str: ...
def set_proxy_user(value: str) -> None: ...

proxy_user = property(get_proxy_user, set_proxy_user)

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If proxy_auth_scheme is set to Basic Authentication, the proxy_user and proxy_password properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If proxy_auth_scheme is set to Digest Authentication, the proxy_user and proxy_password properties are used to respond to the Digest Authentication challenge from the server.

If proxy_auth_scheme is set to NTLM Authentication, the proxy_user and proxy_password properties are used to authenticate through NTLM negotiation.

recipient_address1 Property

Street name.

Syntax

def get_recipient_address1() -> str: ...
def set_recipient_address1(value: str) -> None: ...

recipient_address1 = property(get_recipient_address1, set_recipient_address1)

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS recipient_address1 should not exceed 35 characters.

recipient_address2 Property

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

def get_recipient_address2() -> str: ...
def set_recipient_address2(value: str) -> None: ...

recipient_address2 = property(get_recipient_address2, set_recipient_address2)

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS recipient_address2 should not exceed 35 characters.

recipient_address_flags Property

Various flags that denote information about the address.

Syntax

def get_recipient_address_flags() -> int: ...
def set_recipient_address_flags(value: int) -> None: ...

recipient_address_flags = property(get_recipient_address_flags, set_recipient_address_flags)

Default Value

0

Remarks

Various flags that denote information about the address.

recipient_city Property

Name of city, town, etc.

Syntax

def get_recipient_city() -> str: ...
def set_recipient_city(value: str) -> None: ...

recipient_city = property(get_recipient_city, set_recipient_city)

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

recipient_country_code Property

Country code.

Syntax

def get_recipient_country_code() -> str: ...
def set_recipient_country_code(value: str) -> None: ...

recipient_country_code = property(get_recipient_country_code, set_recipient_country_code)

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

recipient_state Property

State or province code.

Syntax

def get_recipient_state() -> str: ...
def set_recipient_state(value: str) -> None: ...

recipient_state = property(get_recipient_state, set_recipient_state)

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

recipient_zip_code Property

Postal code.

Syntax

def get_recipient_zip_code() -> str: ...
def set_recipient_zip_code(value: str) -> None: ...

recipient_zip_code = property(get_recipient_zip_code, set_recipient_zip_code)

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both recipient_city and recipient_state are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

recipient_candidate_aggregate Property

String representing the list of destination address candidates (if any).

Syntax

def get_recipient_candidate_aggregate() -> str: ...

recipient_candidate_aggregate = property(get_recipient_candidate_aggregate, None)

Default Value

""

Remarks

If the destination address provided in the time-in-transit request (when the get_shipping_time method is called) is an invalid address, a list of potential candidates for the destination address will be returned in the server response. This is applicable for US only.

This destination address candidate list will be stored as a string in recipient_candidate_aggregate, formatted as JSON.

To get the detailed information for each destination address candidate (city, state, zip code range), the UPSAddress class can be used. To read an address, set the Aggregate property of an UPSAddress class to this value, and read the values of the desired fields for each candidate from 0 to UPSAddress's MatchCount - 1 .

The returned candidate list will be ordered according to a level of confidence. The first candidate returned has the highest level of confidence based on the information provided in the request. You can choose the correct address and resubmit the Time-in-Transit request (by calling the get_shipping_time method again) using any of these candidates as the origin and/or destination addresses to get service specific values.

This property is read-only.

requested_service Property

Service type for which the shipping rate is requested.

Syntax

def get_requested_service() -> int: ...
def set_requested_service(value: int) -> None: ...

requested_service = property(get_requested_service, set_requested_service)

Default Value

0

Remarks

This property is required to be entered in the request only if the rate request is made for a specific UPS service type. In this case, the requested_service should be set to a value different from 'stUnspecified'.

Otherwise, the rate request will be considered by the UPS server as it has been made for all available services and respective rates to ship a package from the sender_address to recipient_address. The availability and the description of UPS services depend on the country of origin.

Valid values for UPS are:

Note: stUPSSaver (50) is a valid option for US domestic shipment, but only when sending to remote parts of Alaska or Hawaii Note: stUPSFirstClass (35), stUPSPriorityMail (36), stUPSExpeditedMailInnovations (37), stUPSPriorityMailInnovations (38), and stUPSEconomyMailInnovations (39) will not return any rates.

sender_address1 Property

Street name.

Syntax

def get_sender_address1() -> str: ...
def set_sender_address1(value: str) -> None: ...

sender_address1 = property(get_sender_address1, set_sender_address1)

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS sender_address1 should not exceed 35 characters.

sender_address2 Property

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

def get_sender_address2() -> str: ...
def set_sender_address2(value: str) -> None: ...

sender_address2 = property(get_sender_address2, set_sender_address2)

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS sender_address2 should not exceed 35 characters.

sender_city Property

Name of city, town, etc.

Syntax

def get_sender_city() -> str: ...
def set_sender_city(value: str) -> None: ...

sender_city = property(get_sender_city, set_sender_city)

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

sender_country_code Property

Country code.

Syntax

def get_sender_country_code() -> str: ...
def set_sender_country_code(value: str) -> None: ...

sender_country_code = property(get_sender_country_code, set_sender_country_code)

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

sender_state Property

State or province code.

Syntax

def get_sender_state() -> str: ...
def set_sender_state(value: str) -> None: ...

sender_state = property(get_sender_state, set_sender_state)

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

sender_zip_code Property

Postal code.

Syntax

def get_sender_zip_code() -> str: ...
def set_sender_zip_code(value: str) -> None: ...

sender_zip_code = property(get_sender_zip_code, set_sender_zip_code)

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both sender_city and sender_state are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

sender_candidate_aggregate Property

String representing the list of origin address candidates (if any).

Syntax

def get_sender_candidate_aggregate() -> str: ...

sender_candidate_aggregate = property(get_sender_candidate_aggregate, None)

Default Value

""

Remarks

If the origin address provided in the time-in-transit request (when the get_shipping_time method is called) is an invalid address, a list of potential candidates for the origin address will be returned in the server response. This is applicable for US only.

This origin address candidate list will be stored as a string in sender_candidate_aggregate, formatted as JSON.

To get the detailed information for each origin address candidate (city, state, zip code range), the UPSAddress class can be used. To read an address, set the Aggregate property of an UPSAddress class to this value, and read the values of the desired fields for each candidate from 0 to UPSAddress's MatchCount - 1 .

The returned candidate list will be ordered according to a level of confidence. The first candidate returned has the highest level of confidence based on the information provided in the request. You can choose the correct address and resubmit the Time-in-Transit request (by calling the get_shipping_time method again) using any of these candidates as the origin and/or destination addresses to get service specific values.

This property is read-only.

service_count Property

The number of records in the Service arrays.

Syntax

def get_service_count() -> int: ...

service_count = property(get_service_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• service_account_net_charge
• service_aggregate
• service_business_days
• service_customer_center_cutoff
• service_delay_days
• service_delivery_date
• service_delivery_day
• service_delivery_time
• service_guaranteed_description
• service_holidays
• service_list_base_charge
• service_list_net_charge
• service_list_total_surcharge
• service_rest_days
• service_ship_date
• service_ship_time
• service_transit_time
• service_type
• service_type_description

The array indices start at 0 and end at service_count - 1.

This property is read-only.

service_account_net_charge Property

Net charge amount applied to a ServiceType .

Syntax

def get_service_account_net_charge(service_idx: int) -> str: ...

Default Value

""

Remarks

Net charge amount applied to a service_type.

For FedEx, this is specific to the fed_ex_account_number. After calling the get_rates method, the service_account_net_charge will be filled with the value of discounted net charge amount specific to the fed_ex_account_number (i.e. depending on the current rate schedule the fed_ex_account_number is receiving from FedEx).

For UPS, this is the value of grand total charges for account based rating applied to a shipment when using the returned service_type

The UPS server response will contain negotiated rate(s) only for the qualified ups_account_numbers. If the user is authorized for negotiated rates, and if negotiated rates apply to the particular service, UPS returns those rates along with the published rates in its response. Otherwise, a warning message might be returned that indicates ineligibility and only the published rates are returned in the response. For more information on negotiated rates, including authorization to receive them, please check with your UPS account representative.

This property is not used by the USPS class.

For Canada Post, this field will contain the total cost of the shipment if sent using this service including the cost of selected or required options, surcharges, discounts and taxes.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_aggregate Property

Aggregate of details and rates for the ServiceType in the list of available services.

Syntax

def get_service_aggregate(service_idx: int) -> str: ...

Default Value

""

Remarks

Aggregate of details and rates for the service_type in the list of available services.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_business_days Property

Number of business days from origin to destination location.

Syntax

def get_service_business_days(service_idx: int) -> int: ...

Default Value

0

Remarks

Number of business days from origin to destination location. This is valid only for UPS and is returned for the number of UPS business days (Monday, Tuesday, Wednesday, Thursday, Friday and Saturday) the shipment will take to travel from one location to another.

If applicable, this property is filled after a call to the get_shipping_time.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_customer_center_cutoff Property

Time the UPS Customer Service Center closes.

Syntax

def get_service_customer_center_cutoff(service_idx: int) -> str: ...

Default Value

""

Remarks

Time the UPS Customer Service Center closes.

This value is only relevant for UPS and it provides the user with the time the Customer Service Center closes. This is applicable for shipments outside the US only.

If applicable, this property is filled after a call to the get_shipping_time.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_delay_days Property

Number of days the shipment is delayed in customs.

Syntax

def get_service_delay_days(service_idx: int) -> int: ...

Default Value

0

Remarks

Number of days the shipment is delayed in customs. This is only valid for UPS requests, and is returned for requests outside the US only and when the request indicates the query is in reference to a Non-Document type of shipment.

If applicable, this property is filled after a call to the get_shipping_time.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_delivery_date Property

This indicates the shipment delivery date for the ServiceType .

Syntax

def get_service_delivery_date(service_idx: int) -> str: ...

Default Value

""

Remarks

This indicates the shipment delivery date for the service_type.

In regards to International services, the delivery date availability is limited to some postal-code supported countries. The delivery date will be returned if available. Format: YYYY-MM-DD.

For UPS, this property is filled after a call to the get_shipping_time.

This is not applicable to USPS.

For Canada Post, this field will be populated after a get_rates call and will contain the estimated date of delivery, starting from the expected mailing-date.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_delivery_day Property

Indicates the day of the week the shipment can be delivered when using the ServiceType .

Syntax

def get_service_delivery_day(service_idx: int) -> str: ...

Default Value

""

Remarks

Indicates the day of the week the shipment can be delivered when using the service_type. Possible values are: SUN, MON, TUE, WED, THU, FRI, SAT. In regards to International services, the delivery date availability is limited to some postal-code supported countries and it will be returned if available.

For UPS, this property is filled after a call to the get_shipping_time.

This is not applicable to USPS.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_delivery_time Property

Scheduled local delivery time.

Syntax

def get_service_delivery_time(service_idx: int) -> str: ...

Default Value

""

Remarks

Scheduled local delivery time. This is available only for UPS, and indicates the latest time of day the shipment will be delivered as guaranteed by UPS. Format: HH:MM:SS.

If applicable, this property is filled after a call to the get_shipping_time.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_guaranteed_description Property

Textual description of a guaranteed delivery for a UPS service type in the list of available services returned.

Syntax

def get_service_guaranteed_description(service_idx: int) -> str: ...

Default Value

""

Remarks

Textual description of a guaranteed delivery for a UPS service type in the list of available services returned. This is populated when the get_shipping_time method is called for UPS only.

This method is also populated for Canada Post after the get_rates method is called. The returned value will either be "true" or "false" to indicate whether the delivery date is guaranteed.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_holidays Property

Number of national holidays during transit.

Syntax

def get_service_holidays(service_idx: int) -> int: ...

Default Value

0

Remarks

Number of national holidays during transit. This is returned only for UPS when the shipment would be in transit during a national holiday. Holidays outside the US are taken into account. Returned for requests outside the US only.

If applicable, this property is filled after a call to the get_shipping_time.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_list_base_charge Property

Transportation charges before surcharges and discounts applied to a ServiceType .

Syntax

def get_service_list_base_charge(service_idx: int) -> str: ...

Default Value

""

Remarks

Transportation charges before surcharges and discounts applied to a service_type. After calling the get_rates method, the service_list_base_charge will be filled with the value of base charge amount.

For FedEx, this is returned in the server response only if the rate_type is set to 0 (rtList) in the request.

This does not apply to USPS.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_list_net_charge Property

Net charge amount applied to a ServiceType .

Syntax

def get_service_list_net_charge(service_idx: int) -> str: ...

Default Value

""

Remarks

Net charge amount applied to a service_type.

After calling the get_rates method, the service_list_net_charge will be filled with the value of list net charge amount.

For FedEx, this is returned in the server response only if the rate_type is set to 0 (rtList) in the request.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_list_total_surcharge Property

Total surcharge amount for all additional services applied to a ServiceType .

Syntax

def get_service_list_total_surcharge(service_idx: int) -> str: ...

Default Value

""

Remarks

Total surcharge amount for all additional services applied to a service_type.

After calling the get_rates method, the service_list_total_surcharge will be filled with the value of total surcharges applied.

For FedEx, this is returned in the server response only if the rate_type is set to 0 (rtList) in the request.

This value does not apply to USPS.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_rest_days Property

Number of days the shipment is in rest due to non-business days.

Syntax

def get_service_rest_days(service_idx: int) -> int: ...

Default Value

0

Remarks

Number of days the shipment is in rest due to non-business days. Returned for UPS requests outside the US only.

If applicable, this property is filled after a call to the get_shipping_time.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_type Property

Indicates the service type in the list of available services returned.

Syntax

def get_service_type(service_idx: int) -> int: ...

Default Value

0

Remarks

Indicates the service type in the list of available services returned.

This is populated when the get_shipping_time or get_rates methods are called.

Valid values for FedEx are:

Valid values for UPS are:

Note: stUPSSaver (50) is a valid option for US domestic shipment, but only when sending to remote parts of Alaska or Hawaii Note: stUPSFirstClass (35), stUPSPriorityMail (36), stUPSExpeditedMailInnovations (37), stUPSPriorityMailInnovations (38), and stUPSEconomyMailInnovations (39) will not return any rates.

Valid values for USPS are:

Please note that the requested_service stUSPSBPM (74) is no longer supported by Endicia.

Valid values for Canada Post are:

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_type_description Property

Indicates the textual description of a service type in the list of available services returned.

Syntax

def get_service_type_description(service_idx: int) -> str: ...

Default Value

""

Remarks

Indicates the textual description of a service type in the list of available services returned.

Possible returned values for FedEx are:

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_ship_date Property

Date UPS picks up the package from the origin.

Syntax

def get_service_ship_date(service_idx: int) -> str: ...

Default Value

""

Remarks

Date UPS picks up the package from the origin. In the event the service_ship_date differs from the ship_date provided in the request, a warning message will be returned.

This is only applicable to UPS get_shipping_time.

Format: YYYY-MM-DD.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_ship_time Property

Time UPS picks up the package from the origin.

Syntax

def get_service_ship_time(service_idx: int) -> str: ...

Default Value

""

Remarks

Time UPS picks up the package from the origin. It is returned for requests outside the US. If applicable, this property is filled after a call to the get_shipping_time.

This is only applicable to UPS get_shipping_time.

Format: HH:MM:SS

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

service_transit_time Property

Expected number of days in transit from pickup to delivery for the ServiceType .

Syntax

def get_service_transit_time(service_idx: int) -> str: ...

Default Value

""

Remarks

Expected number of days in transit from pickup to delivery for the service_type. This is an estimate only and depends on the customs clearance times. It is optional to be returned in the server reply.

The service_idx parameter specifies the index of the item in the array. The size of the array is controlled by the service_count property.

This property is read-only.

ship_date Property

The date the user requests UPS to pickup the package from the origin.

Syntax

def get_ship_date() -> str: ...
def set_ship_date(value: str) -> None: ...

ship_date = property(get_ship_date, set_ship_date)

Default Value

""

Remarks

This is required to be provided when get_shipping_time method is called. Query cannot exceed 60 days into the future.

This should be entered in this format: YYYYMMDD.

shipment_special_services Property

Contains the collection of special services offered by UPS on shipment level.

Syntax

def get_shipment_special_services() -> int: ...
def set_shipment_special_services(value: int) -> None: ...

shipment_special_services = property(get_shipment_special_services, set_shipment_special_services)

Default Value

0

Remarks

To request any of the special services offered by UPS in a request, you must set the shipment_special_services to a set of flags as listed below (specified in hexadecimal notation). They can be or-ed together to include multiple conditions:

The meaning and limitations for each special service option are listed below:

• Hold for Pickup: This indicates that UPS should deliver your package to the UPS Customer Center you choose and then call the recipient when the package is ready.

  This is applicable only if service_type is set to stUPSWorldwideExpressFreight.

• Liftgate Dropoff: This requests that UPs provide their liftgate services unload a shipment when unloading docks are not available.

  This is applicable only if service_type is set to stUPSWorldwideExpressFreight.

• Liftgate Pickup: This requests that UPs provide their liftgate services load a shipment when loading docks are not available.

  This is applicable only if service_type is set to stUPSWorldwideExpressFreight.

• Return Shipment: This is applicable to return shipments only. Indicates that the ship request is made for Print Return Label (PRL). With this option you can print a return label to include in an outbound shipment, or provide a label to your customer separately.

  If you want to arrange for UPS to mail a return label to your customer, you can use the ReturnPrintAndMail config setting.

  If you want to arrange for UPS to email a return label to your customer, you can use the ElectronicReturnLabel config setting.

  If you want to arrange for UPS to make one attempt to pick up the package to be returned, you can use the ReturnServiceFirstAttempt config setting.

  If you want to arrange for UPS to make three attempts to pick up the package to be returned, you can use the ReturnServiceThirdAttempt config setting.

  Using the last 4 options: in the server response, you will receive only a Tracking number for the shipment to be returned, but not a return label and/or return receipt.

  For return shipments, one of the following conditions must be met on account_country_code, sender_country_code and recipient_country_code: At least two of these country codes are the same; None of these country codes are the same and are a member of the EU; None of these country codes are the same and at least one of them is not a member of the EU, and the shipper must have third country contract service. Following is a list of restrictions that are applicable when using return label types. This cannot be combined with COD, Saturday Delivery, Saturday Pickup, and/or Delivery Confirmation service options. For international shipments with return service, the Invoice flag is the only valid value for form_types. The availability of return service depends on the origin and destination country code, and on the selected service_type. The package_description is required to be provided in the request for each package contained in the shipment. The package_type should be set to a value other than: 4 (ptUPS25kgBox), 5 (ptUPS10kgBox), and 6 (ptPallet). Return shipments cannot be voided at the package level. Return shipments can be voided within 24 hours only.

  Also please note that when you set this option that only the return label is being printed, you must submit a separate request to print the shipping label.

• Saturday Delivery: Indicates that you request to have the shipment delivered on a Saturday. Saturday delivery service is available for an additional charge depending on the package service type and origin/destination pair. This service is not available for return shipments.
• Saturday Pickup: The presence indicates Saturdary pickup is requested. Saturday pickup service is available for an additional charge depending on the package service type and origin/destination pair.
• Return of Document: This may also be referred to as the Return of Invoice service and is unique to Poland. If set UPS will use their Return of Document service to return the signed invoice to the shipper.
• Commercial Invoice Removal: When set this will indicate that the commercial invoice should be removed before delivery, thus not revealing the value of the contents to the recipient.
• Carbon Neutral: This is required to make a shipment that is carbon neutral.
• Exchange Forward: This is required in order to make exchange forward shipments.
• Dropoff at UPS Facility: When set this indicates that the package will be dropped off at a UPS Facility.

  This is applicable only if service_type is set to stUPSWorldwideExpressFreight.

• Deliver To Addressee Only: When set this requires that the addressee be the one who takes final delivery of the package being held at a UPS Access Point

  This accessorial is only valid when ShipmentIndicationType is set to 1.

• Direct Delivery Only: When set this will ensure that the package is delivered to the ShipTo address on the shipping label.

  This accessorial is not valid when ShipmentIndicationType is set.

ssl_accept_server_cert_encoded Property

This is the certificate (PEM/Base64 encoded).

Syntax

def get_ssl_accept_server_cert_encoded() -> bytes: ...
def set_ssl_accept_server_cert_encoded(value: bytes) -> None: ...

ssl_accept_server_cert_encoded = property(get_ssl_accept_server_cert_encoded, set_ssl_accept_server_cert_encoded)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_accept_server_cert_store and ssl_accept_server_cert_subject properties also may be used to specify a certificate.

When ssl_accept_server_cert_encoded is set, a search is initiated in the current ssl_accept_server_cert_store for the private key of the certificate. If the key is found, ssl_accept_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_accept_server_cert_subject is set to an empty string.

ssl_cert_encoded Property

This is the certificate (PEM/Base64 encoded).

Syntax

def get_ssl_cert_encoded() -> bytes: ...
def set_ssl_cert_encoded(value: bytes) -> None: ...

ssl_cert_encoded = property(get_ssl_cert_encoded, set_ssl_cert_encoded)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_cert_store and ssl_cert_subject properties also may be used to specify a certificate.

When ssl_cert_encoded is set, a search is initiated in the current ssl_cert_store for the private key of the certificate. If the key is found, ssl_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_cert_subject is set to an empty string.

ssl_cert_store Property

This is the name of the certificate store for the client certificate.

Syntax

def get_ssl_cert_store() -> bytes: ...
def set_ssl_cert_store(value: bytes) -> None: ...

ssl_cert_store = property(get_ssl_cert_store, set_ssl_cert_store)

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The ssl_cert_store_type property denotes the type of the certificate store specified by ssl_cert_store. If the store is password protected, specify the password in ssl_cert_store_password.

ssl_cert_store is used in conjunction with the ssl_cert_subject property to specify client certificates. If ssl_cert_store has a value, and ssl_cert_subject or ssl_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

ssl_cert_store_password Property

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

def get_ssl_cert_store_password() -> str: ...
def set_ssl_cert_store_password(value: str) -> None: ...

ssl_cert_store_password = property(get_ssl_cert_store_password, set_ssl_cert_store_password)

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

ssl_cert_store_type Property

This is the type of certificate store for this certificate.

Syntax

def get_ssl_cert_store_type() -> int: ...
def set_ssl_cert_store_type(value: int) -> None: ...

ssl_cert_store_type = property(get_ssl_cert_store_type, set_ssl_cert_store_type)

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

ssl_cert_subject Property

This is the subject of the certificate used for client authentication.

Syntax

def get_ssl_cert_subject() -> str: ...
def set_ssl_cert_subject(value: str) -> None: ...

ssl_cert_subject = property(get_ssl_cert_subject, set_ssl_cert_subject)

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

ssl_provider Property

This specifies the SSL/TLS implementation to use.

Syntax

def get_ssl_provider() -> int: ...
def set_ssl_provider(value: int) -> None: ...

ssl_provider = property(get_ssl_provider, set_ssl_provider)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, on Windows the class will use the platform implementation. On Linux/macOS the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

ssl_server_cert_encoded Property

This is the certificate (PEM/Base64 encoded).

Syntax

def get_ssl_server_cert_encoded() -> bytes: ...

ssl_server_cert_encoded = property(get_ssl_server_cert_encoded, None)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_server_cert_store and ssl_server_cert_subject properties also may be used to specify a certificate.

When ssl_server_cert_encoded is set, a search is initiated in the current ssl_server_cert_store for the private key of the certificate. If the key is found, ssl_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_server_cert_subject is set to an empty string.

This property is read-only.

timeout Property

A timeout for the class.

Syntax

def get_timeout() -> int: ...
def set_timeout(value: int) -> None: ...

timeout = property(get_timeout, set_timeout)

Default Value

60

Remarks

If the timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use do_events to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If timeout expires, and the operation is not yet complete, the class fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by timeout seconds when any amount of data is successfully sent or received.

The default value for the timeout property is 60 seconds.

total_value Property

Monetary value of shipment contents.

Syntax

def get_total_value() -> str: ...
def set_total_value(value: str) -> None: ...

total_value = property(get_total_value, set_total_value)

Default Value

"0.00"

Remarks

Required for all non-document shipments outside the US. Required for Document shipments (when Documents is set to True) only when either the sender_country_code or recipient_country_code is CA (Canada).

This is returned in the server response only if provided in the request.

Cannot exceed more than 9 whole numbers and 2 decimal places. Maximum value is: 999999999.99.

total_weight Property

Total shipment's weight.

Syntax

def get_total_weight() -> str: ...
def set_total_weight(value: str) -> None: ...

total_weight = property(get_total_weight, set_total_weight)

Default Value

"1.0"

Remarks

This indicates shipment's weight. Required for shipments outside the US and non-document shipments inside the US. It will be returned in the server response only if provided in the request.

Allows for only one decimal point and one decimal place. It cannot exceed: 150 LBS, 65 KGS for Canada, 70 KGS for the rest of the world.

ups_account_number Property

The shipper's UPS account number.

Syntax

def get_ups_account_number() -> str: ...
def set_ups_account_number(value: str) -> None: ...

ups_account_number = property(get_ups_account_number, set_ups_account_number)

Default Value

""

Remarks

The shipper's UPS account number.

This property describes the shipper's 6- or 10- digit UPS account number.

ups_authorization_token Property

Authorization Token used to authenticate the request.

Syntax

def get_ups_authorization_token() -> str: ...
def set_ups_authorization_token(value: str) -> None: ...

ups_authorization_token = property(get_ups_authorization_token, set_ups_authorization_token)

Default Value

""

Remarks

Authorization Token used to authenticate the request.

This field should be set to the value of a bearer token obtained through OAuth 2.0. For more information on getting a bearer token, see the documentation for the OAuth component.

ups_server Property

URL for the UPS server where the requests are sent.

Syntax

def get_ups_server() -> str: ...
def set_ups_server(value: str) -> None: ...

ups_server = property(get_ups_server, set_ups_server)

Default Value

""

Remarks

URL for the UPS server where the requests are sent. This will overwrite the internal values that the component uses.

Normally, you do not need to set this property. By default, the component will send the request to the preset production end-point. In order to send request to the test environment, you must set the TESTMODE config to true like: component.Config("TESTMODE=true").

The following URLs may be used for testing:

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

get_rates Method

Returns rate information for a specified or all available UPS RequestedService s.

Syntax

def get_rates() -> None: ...

Remarks

To get the courtesy rate quotes for UPS services, you can call the get_rates method. If rates are needed for a specific service type, you will have to set the requested_service to the value you need the rates for (other than 0 : stUnspecified). The requested_service identifies the UPS service for which you want to retrieve rate information.

If the rates are wanted for all available UPS services, you should set the requested_service to 0 (stUnspecified). Following validation, the UPSRates identifies and rates all available services. The server response will include a list of services, their associated rate, and guaranteed delivery time, if available.

In either case, the following properties or config settings are sent in the request (if any of these have not been set, their default values will be used instead):

• ups_server (required)
• ups_authorization_token (required)
• ups_account_number (required only when requesting to receive negotiated rates; otherwise optional)
• requested_service (required)
• pickup_type (required)
• customer_type (required)
• sender_address(required)
• recipient_address (required)
• packages (required)
• WeightUnit (optional)
• CurrencyCode (optional)

Returned values upon a successful reply are:

• services

If there is a problem with any of the input values within the request, the response will either raise an error (when it's an hard error) and transaction will fail, or give a warning (when it's a soft error), which can be accessed via Warning, and the transaction will go through.

For more details on errors codes and descriptions, please refer to the Error Codes section.

get_shipping_time Method

Provides the average estimated time to ship a package from an origin to a destination address.

Syntax

def get_shipping_time() -> None: ...

Remarks

This method call issues a Time in Transit request to the UPS server and parses the response.

The following can be set when this method is called:

• sender_address (required: the sender_city is required for requests outside the US if the sender_zip_code is not used in the origin country; the sender_state is optional; the sender_country_code is required; the sender_zip_code is required if the sender_country_code supports postal code system. If not provided, a candidate list will be returned for the user to enter a valid Postal Code for the specified sender_city.
• recipient_address (required: the recipient_city is required for requests outside the US if the recipient_zip_code is not used in the destination country; the recipient_state is optional; the recipient_country_code is required; the recipient_zip_code is required if the recipient_country_code supports postal code system. If not provided, a candidate list will be returned for the user to enter a valid Postal Code for the specified recipient_city.
• SenderTown is optional, applicable to non-US addresses, and used to make the origin address more precise;
• RecipientTown is optional, applicable to non-US addresses, and used to make the destination address more precise;
• ship_date (required)
• total_weight (conditional)
• WeightUnit (conditional - applicable when the total_weight is provided in the request)
• Documents (optional)
• total_value (conditional - required for Document shipments when the origin or destination is Canada or non-document shipments outside the US)
• CurrencyCode (conditional - applicable when the total_value is provided in the request)

The minimum information returned in the response include a summary of the user's input as well as:

• disclaimer (when applicable)
• SenderCountryName
• RecipientCountryName

If the sender_address and recipient_address addresses provided in the request are found in UPS system exactly as entered, then the services is filled upon server's response.

Otherwise, if those do not match any data located in UPS system, then the server returns a list of candidates for the origin and/or destination addresses, which will be stored as strings (formatted as JSON) in sender_candidate_aggregate (for origin) and recipient_candidate_aggregate (for destination).

To read an address, set the Aggregate property of an UPSAddress class to this value, and read the values of the desired fields for each candidate from 0 to UPSAddress's MatchCount - 1 .

The returned candidate list will be ordered according to a level of confidence. The first candidate returned has the highest level of confidence based on the information provided in the request. You can choose the correct address and resubmit the Time-in-Transit request (by calling the get_shipping_time method again) using any of these candidates as the origin and/or destination addresses to get service specific values. You can then resubmit the Time-in-Transit request using any of these candidates as the origin and/or destination addresses (when calling the get_shipping_time method).

So, after submitting the request, you will either receive a successful response containing time-in-transit information (as described above), or an error if error conditions were found.

reset Method

Resets the internal state of the class and all properties to their default values.

Syntax

def reset() -> None: ...

Remarks

The Reset method does not have any parameters and does not return any value.

on_error Event

Information about errors during data delivery.

Syntax

class UPSRatesErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class UPSRates:
@property
def on_error() -> Callable[[UPSRatesErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[UPSRatesErrorEventParams], None]) -> None: ...

Remarks

The on_error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

on_notification Event

Notification returned by the server upon successful request (if applicable).

Syntax

class UPSRatesNotificationEventParams(object):
  @property
  def message() -> str: ...

# In class UPSRates:
@property
def on_notification() -> Callable[[UPSRatesNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[UPSRatesNotificationEventParams], None]) -> None: ...

Remarks

When sending a request, the server may return with a successful reply or an error. However, even when a transaction is successful, a warning or a note might still be returned by the server. In such cases, the on_notification event is fired.

Notifications returned through this event are non-fatal and shipments will still be processes, labels will still be printable, rates are still returned, etc. These notifications should be treated as informational only.

on_ssl_server_authentication Event

Fired after the server presents its certificate to the client.

Syntax

class UPSRatesSSLServerAuthenticationEventParams(object):
  @property
  def cert_encoded() -> bytes: ...

  @property
  def cert_subject() -> str: ...

  @property
  def cert_issuer() -> str: ...

  @property
  def status() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class UPSRates:
@property
def on_ssl_server_authentication() -> Callable[[UPSRatesSSLServerAuthenticationEventParams], None]: ...
@on_ssl_server_authentication.setter
def on_ssl_server_authentication(event_hook: Callable[[UPSRatesSSLServerAuthenticationEventParams], None]) -> None: ...

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

on_ssl_status Event

Fired when secure connection progress messages are available.

Syntax

class UPSRatesSSLStatusEventParams(object):
  @property
  def message() -> str: ...

# In class UPSRates:
@property
def on_ssl_status() -> Callable[[UPSRatesSSLStatusEventParams], None]: ...
@on_ssl_status.setter
def on_ssl_status(event_hook: Callable[[UPSRatesSSLStatusEventParams], None]) -> None: ...

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

UPSRates Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

UPSRates Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

Socket Config Settings

Base Config Settings

UPSRates Errors

UPSRates Errors

	301   Operation interrupted (or timeout).
	432   Invalid index.
	527   Server Error Response.
	528   Property set with invalid data.
	560   Missing data.

The class may also return one of the following error codes, which are inherited from other classes.