UPSFreightRates Control

Properties Methods Events Config Settings Errors

Provides UPS Freight Rates service.

Syntax

UPSFreightRates

Remarks

The UPSFreightRates control provides a way to retrieve rates for freight shipments. To use the control first set RequestedService to the service for which rates will be retrieved. Then specify the sender, recipient, and shipment information and call GetRates. Upon response Charges, TotalCharge, BillableWeight, and DimensionalWeight will be populated. For instance:

component.UPSServer = "https://wwwcie.ups.com/api/freight/" component.UPSAuthorizationToken = "Bearer token..." component.UPSAccountNumber = "000000" component.SenderName = "Developer Test 1" component.SenderAddress1 = "101 Developer Way" component.SenderCity = "Richmond" component.SenderState = "VA" component.SenderZipCode = "23224" component.SenderCountryCode = "US" component.RecipientName = "Consignee Test 1" component.RecipientAddress1 = "1000 Consignee Street" component.RecipientCity = "Allanton" component.RecipientState = "MO" component.RecipientZipCode = "63001" component.RecipientCountryCode = "US" component.PayorType = ptSender component.HandlingUnit = "SKD:1" component.CommodityCount = 1 component.CommodityDescription(0) = "LCD TVS" component.CommodityFreightClass(0) = "77.5" component.CommodityWeight(0) = "200" component.CommodityFreightNMFC(0) = "132680" component.CommodityFreightNMFCSub(0) = "02" component.CommodityNumberOfPieces(0) = 20 component.CommodityValue(0) = "100" component.GetRates Debug.Print ("Total Charge: " & component.TotalCharge) Debug.Print ("Billable Weight: " & component.BillableWeight) Debug.Print ("Dimensional Weight: " & component.DimensionalWeight) Dim i As Integer For i = 0 To component.ChargeCount - 1 Debug.Print (component.ChargeType(0) & ": " & component.ChargeValue()) Next i

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.


BillableWeight	Represents the billable weight associated with the shipment.
ChargeCount	The number of records in the Charge arrays.
ChargeType	Indicates the type of the charge.
ChargeDescription	The description of the rate.
ChargeValue	The value of the charge type specified by ChargeType .
CODPayorType	The type of payment that will be used for the COD payment.
CODTotalAmount	The total amount of additional fees.
CODType	The code that indicates the type of funds that will be used for the COD payment.
CommodityCount	The number of records in the Commodity arrays.
CommodityDescription	Complete and accurate description of this commodity line item.
CommodityFreightClass	Indicates the freight class of the commodity.
CommodityFreightIsHazardous	Identifies if the Commodity item is hazardous.
CommodityFreightNMFC	Identifies the National Motor Freight Classification numbers.
CommodityFreightNMFCSub	Identifies the sub code of National Motor Freight Classification numbers.
CommodityFreightPackagingType	Identifies the Commodity item's packaging type.
CommodityNumberOfPieces	The total number of packages, cartons, or containers for the commodity line item.
CommodityValue	The value of an individual item being shipped.
CommodityWeight	The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code.
DimensionalWeight	Represents the dimensional weight associated with the shipment.
FirewallAutoDetect	This property tells the control whether or not to automatically detect and use firewall system settings, if available.
FirewallType	This property determines the type of firewall to connect through.
FirewallHost	This property contains the name or IP address of firewall (optional).
FirewallPassword	This property contains a password if authentication is to be used when connecting through the firewall.
FirewallPort	This property contains the transmission control protocol (TCP) port for the firewall Host .
FirewallUser	This property contains a user name if authentication is to be used connecting through a firewall.
HandlingUnit	Describe the Handling Units (Movable Pieces) in this Shipment.
OverSeasLegHeight	The height of the shipment.
OverSeasLegLength	The length of the shipment.
OverSeasLegPricePerCubicFoot	The price per CubicFoot.
OverSeasLegPricePerCWT	Price per Hundredweight.
OverSeasLegTotalCubicFeet	Total cubic weight of the shipment, obtained by multiplying width by height by depth.
OverSeasLegWidth	The width of the shipment.
PayorAddress1	Street name.
PayorAddress2	A specific detail on the address (such as building, suite, apartment, floor number etc.
PayorCity	Name of city, town, etc.
PayorCountryCode	The country code for the payor of the shipment, or duties and taxes.
PayorName	Identifies the payor's name.
PayorType	Method of payment for shipment, or duties and taxes.
PayorState	State or province code.
PayorZipCode	Payor's postal code (if applicable).
ProxyAuthScheme	This property is used to tell the control which type of authorization to perform when connecting to the proxy.
ProxyAutoDetect	This property tells the control whether or not to automatically detect and use proxy system settings, if available.
ProxyPassword	This property contains a password if authentication is to be used for the proxy.
ProxyPort	This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).
ProxyServer	If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
ProxySSL	This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.
ProxyUser	This property contains a username if authentication is to be used for the proxy.
RecipientAddress1	Street name.
RecipientAddress2	A specific detail on the address (such as building, suite, apartment, floor number etc.
RecipientAddressFlags	Various flags that denote information about the address.
RecipientCity	Name of city, town, etc.
RecipientCountryCode	Country code.
RecipientState	State or province code.
RecipientZipCode	Postal code.
RecipientName	Identifies the recipient's name or company name.
RequestedService	The service selected for the shipment.
SenderAddress1	Street name.
SenderAddress2	A specific detail on the address (such as building, suite, apartment, floor number etc.
SenderCity	Name of city, town, etc.
SenderCountryCode	Country code.
SenderState	State or province code.
SenderZipCode	Postal code.
SenderName	Identifies the sender's locations name or company name.
SSLAcceptServerCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertStore	This is the name of the certificate store for the client certificate.
SSLCertStorePassword	If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreType	This is the type of certificate store for this certificate.
SSLCertSubject	This is the subject of the certificate used for client authentication.
SSLProvider	This specifies the SSL/TLS implementation to use.
SSLServerCertEncoded	This is the certificate (PEM/Base64 encoded).
Timeout	A timeout for the control.
TotalCharge	Represents the total shipment charge.
UPSAccountNumber	The shipper's UPS account number.
UPSAuthorizationToken	Authorization Token used to authenticate the request.
UPSServer	URL for the UPS server where the requests are sent.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
GetRates	Returns rate information for a specified or all available UPS RequestedService s.
Reset	Resets the internal state of the control and all properties to their default values.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.


Error	Information about errors during data delivery.
Notification	Notification returned by the server upon successful request (if applicable).
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.


AlternateDeliveryAddress	Alternate Delivery Address is used for Hold for Pickup or Delivery at UPS Access Points.
CurrencyCode	The currency code associated with the monetary values present in the request.
CustomerTransactionId	Customer transaction id / customer context information.
DeliveryOptions	Value-Added Freight Delivery Services.
IncludeNegotiatedRates	Whether to include the NegotiatedRatesIndicator in the request.
NotificationDialect	Used to specify the dialect for Alternate Delivery Location notifications and UAP Shipper notifications.
NotificationLanguage	Used to specify the language for Alternate Delivery Location notifications and UAP Shipper notifications.
PickupOptions	Value-Added Freight Pickup Services.
PiecesToSort	The number of pieces to sort and segregate.
RawRequest	Contains the complete request sent to the Server.
RawResponse	Contains the complete response returned by the Server.
RequestOption	Defines type of shipping desired.
ShipmentIndicationType	Whether shipment is Hold For Pickup or Delivery at UPS Access Points.
SubVersion	UPS SubVersion.
TaxInformationIndicator	Controls whether to send a TaxInformationIndicator.
TESTMODE	This configuration setting will allow you to run test transactions.
Version	UPS API Version.
Warning	Warning message returned by the server.
WeightUnit	Weight unit.
AcceptEncoding	Used to tell the server which types of content encodings the client supports.
AllowHTTPCompression	This property enables HTTP compression for receiving data.
AllowHTTPFallback	Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.
Append	Whether to append data to LocalFile.
Authorization	The Authorization string to be sent to the server.
BytesTransferred	Contains the number of bytes transferred in the response data.
ChunkSize	Specifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequest	Set to true to compress the body of a PUT or POST request.
EncodeURL	If set to True the URL will be encoded by the control.
FollowRedirects	Determines what happens when the server issues a redirect.
GetOn302Redirect	If set to True the control will perform a GET on the new location.
HTTP2HeadersWithoutIndexing	HTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersion	The version of HTTP used by the control.
IfModifiedSince	A date determining the maximum age of the desired document.
KeepAlive	Determines whether the HTTP connection is closed after completion of the request.
KerberosSPN	The Service Principal Name for the Kerberos Domain Controller.
LogLevel	The level of detail that is logged.
MaxRedirectAttempts	Limits the number of redirects that are followed in a request.
NegotiatedHTTPVersion	The negotiated HTTP version.
OtherHeaders	Other headers as determined by the user (optional).
ProxyAuthorization	The authorization string to be sent to the proxy server.
ProxyAuthScheme	The authorization scheme to be used for the proxy.
ProxyPassword	A password if authentication is to be used for the proxy.
ProxyPort	Port for the proxy server (default 80).
ProxyServer	Name or IP address of a proxy server (optional).
ProxyUser	A user name if authentication is to be used for the proxy.
SentHeaders	The full set of headers as sent by the client.
StatusCode	The status code of the last response from the server.
StatusLine	The first line of the last response from the server.
TransferredData	The contents of the last response from the server.
TransferredDataLimit	The maximum number of incoming bytes to be stored by the control.
TransferredHeaders	The full set of headers as received from the server.
TransferredRequest	The full request as sent by the client.
UseChunkedEncoding	Enables or Disables HTTP chunked encoding for transfers.
UseIDNs	Whether to encode hostnames to internationalized domain names.
UseProxyAutoConfigURL	Whether to use a Proxy auto-config file when attempting a connection.
UserAgent	Information about the user agent (browser).
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the control whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the control binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
CodePage	The system code page used for Unicode to Multibyte translations.
MaskSensitive	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

BillableWeight Property (UPSFreightRates Control)

Represents the billable weight associated with the shipment.

Syntax

upsfreightratescontrol.BillableWeight

Default Value

Remarks

This property is read-only.

Data Type

String

ChargeCount Property (UPSFreightRates Control)

The number of records in the Charge arrays.

Syntax

upsfreightratescontrol.ChargeCount[=integer]

Default Value

Remarks

This property controls the size of the following arrays:

ChargeDescription
ChargeType
ChargeValue

The array indices start at 0 and end at ChargeCount - 1.

This property is not available at design time.

Data Type

Integer

ChargeType Property (UPSFreightRates Control)

Indicates the type of the charge.

Syntax

upsfreightratescontrol.ChargeType(ChargeIndex)[=string]

Default Value

Remarks

Indicates the type of the charge. A partial list of possible values are:


2
ADV_NOTF
AFTR_DSCNT
CA_BORDER
CA_CSTM_MNFST
COD
CON_ST_DEL
DEFICITRATE
DEFICITWGHT
DFCT_AMT
DSCNT
DSCNT_RATE
HAZMAT
HICST
HOL_WE_PU_DEL
INSD_PU_DEL
L_UPGF_016
LIFTGATE
LND_GROSS
MINCHARGE
OFUELSURCHG
RESI_PU_DEL
RMTLOC
SORTSEG
TOTI
TOTO

The ChargeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChargeCount property.

This property is not available at design time.

Data Type

String

ChargeDescription Property (UPSFreightRates Control)

The description of the rate.

Syntax

upsfreightratescontrol.ChargeDescription(ChargeIndex)[=string]

Default Value

Remarks

The description of the rate. The text description is provided by the control based on the value in ChargeType. If a description is not know for the ChargeType this property will hold an empty string. Possible values are:


Fuel Surcharge
Arrival Notification
Amount after Discount
Border Processing Fee
Custom Manifest Fee
Collect on Delivery fee
Construction Site Delivery
Deficit Rate
Deficit Weight
Deficit Charge
Discounted Amount
Discount Rate (as a percentage)
Hazardous Materials Charge
High Cost Service Area Surcharge
Holiday/Weekend Pickup or Delivery
Inside Pickup/Delivery
Custom Charge
Liftgate Fee
Gross Charges
Minimum Charge Applies
Ocean Fuel Surcharge
Residential Pickup/Delivery
Remote Location Fee
Sorting and Segregation
Total Island Charges
Total Ocean Charges

The ChargeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChargeCount property.

This property is not available at design time.

Data Type

String

ChargeValue Property (UPSFreightRates Control)

The value of the charge type specified by ChargeType .

Syntax

upsfreightratescontrol.ChargeValue(ChargeIndex)[=string]

Default Value

Remarks

The value of the charge type specified by ChargeType.

The ChargeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChargeCount property.

This property is not available at design time.

Data Type

String

CODPayorType Property (UPSFreightRates Control)

The type of payment that will be used for the COD payment.

Syntax

upsfreightratescontrol.CODPayorType[=integer]

Possible Values

fcodptCollect(0), 
fcodptPrepaid(1)

Default Value

Remarks

This property specifies the type of COD payment. Possible values are:


fcodptCollect (0)
fcodptPrepaid (1)

Data Type

Integer

CODTotalAmount Property (UPSFreightRates Control)

The total amount of additional fees.

Syntax

upsfreightratescontrol.CODTotalAmount[=string]

Default Value

Remarks

UPS Freight handles your payment collections upon delivery and sends the payment to you (if applicable) for an additional charge.

Data Type

String

CODType Property (UPSFreightRates Control)

The code that indicates the type of funds that will be used for the COD payment.

Syntax

upsfreightratescontrol.CODType[=integer]

Possible Values

fcodtsCertifiedCheck(0), 
fcodtsCash(1), 
fcodtsCompanyCheck(2)

Default Value

Remarks

This property specifies the type of COD requested. Possible values are:


fcodtsCertifiedCheck (0)
fcodtsCash (1)
fcodtsCompanyCheck (2)

Data Type

Integer

CommodityCount Property (UPSFreightRates Control)

The number of records in the Commodity arrays.

Syntax

upsfreightratescontrol.CommodityCount[=integer]

Default Value

Remarks

This property controls the size of the following arrays:

CommodityDescription
CommodityFreightClass
CommodityFreightIsHazardous
CommodityFreightNMFC
CommodityFreightNMFCSub
CommodityFreightPackagingType
CommodityNumberOfPieces
CommodityValue
CommodityWeight

The array indices start at 0 and end at CommodityCount - 1.

This property is not available at design time.

Data Type

Integer

CommodityDescription Property (UPSFreightRates Control)

Complete and accurate description of this commodity line item.

Syntax

upsfreightratescontrol.CommodityDescription(CommodityIndex)[=string]

Default Value

Remarks

Complete and accurate description of this commodity line item.

It is applicable to all international forms. Optional for Partial Invoice and required for the rest of form types.

Specific description of the type of equipment and its intended use is required. Clearance delays may result if the contents are not completely and accurately described. Vague description will not be accepted by Customs. Only a portion of this field will print on the label.

For FedEx, if the shipment contains documents only (i.e., Documents is set to True), then the CommodityDescription has to be set to an approved value. The following table lists document descriptions approved by U.S. Customs.


Description
Correspondence/No Commercial Value	Leases
Accounting Documents	Legal Documents
Analysis Reports	Letters and Cards
Applications (Completed)	Letter of Credit Packets
Bank Statements	Loan Documents
Bid Quotations	Marriage Certificates
Birth Certificates	Medical Records
Bills of Sale	Office Records
Bonds	Operating Agreements
Business Correspondence	Patent Applications
Checks (Completed)	Permits
Claim Files	Photocopies
Closing Statements	Proposals
Conference Reports	Prospectuses
Contracts	Purchase Orders
Cost Estimates	Quotations
Court Transcripts	Reservation Confirmation
Credit Applications	Resumes
Data Sheets	Sales Agreements
Deeds	Sales Reports
Employment Papers	Shipping Documents
Escrow Instructions	Statements/Reports
Export Papers	Statistical Data
Financial Statements	Stock Information
Immigration Papers	Tax Papers
Income Statements	Trade Confirmation
Insurance Documents	Transcripts
Interoffice Memos	Warranty Deeds
Inventory Reports
Invoices (Completed)

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityFreightClass Property (UPSFreightRates Control)

Indicates the freight class of the commodity.

Syntax

upsfreightratescontrol.CommodityFreightClass(CommodityIndex)[=string]

Default Value

Remarks

Indicates the freight class of the commodity.

The following table lists freight classes available from UPS freight services.


Freight Class
50
55
60
65
70
77.5
85
92.5
100
110
125
150
175
200
250
300
400
500

NOTE: This field is only applicable to UPS freight.

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityFreightIsHazardous Property (UPSFreightRates Control)

Identifies if the Commodity item is hazardous.

Syntax

upsfreightratescontrol.CommodityFreightIsHazardous(CommodityIndex)[=boolean]

Default Value

False

Remarks

Identifies if the Commodity item is hazardous.

NOTE: This field is only applicable to UPS freight.

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Boolean

CommodityFreightNMFC Property (UPSFreightRates Control)

Identifies the National Motor Freight Classification numbers.

Syntax

upsfreightratescontrol.CommodityFreightNMFC(CommodityIndex)[=string]

Default Value

Remarks

Identifies the National Motor Freight Classification numbers.

NOTE: This field is only applicable to UPS freight.

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityFreightNMFCSub Property (UPSFreightRates Control)

Identifies the sub code of National Motor Freight Classification numbers.

Syntax

upsfreightratescontrol.CommodityFreightNMFCSub(CommodityIndex)[=string]

Default Value

Remarks

Identifies the sub code of National Motor Freight Classification numbers.

NOTE: This field is only applicable to UPS freight.

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityFreightPackagingType Property (UPSFreightRates Control)

Identifies the Commodity item's packaging type.

Syntax

upsfreightratescontrol.CommodityFreightPackagingType(CommodityIndex)[=integer]

Possible Values

cptBag(0), 
cptBale(1), 
cptBarrel(2), 
cptBundle(3), 
cptBin(4), 
cptBox(5), 
cptBasket(6), 
cptBunch(7), 
cptCabinet(8), 
cptCan(9), 
cptCarrier(10), 
cptCase(11), 
cptCarboy(12), 
cptContainer(13), 
cptCrate(14), 
cptCask(15), 
cptCarton(16), 
cptCylinder(17), 
cptDrum(18), 
cptLoose(19), 
cptOther(20), 
cptPail(21), 
cptPieces(22), 
cptPackage(23), 
cptPipe(24), 
Line(25), 
cptPallet(26), 
cptRack(27), 
cptReel(28), 
cptRoll(29), 
cptSkid(30), 
cptSpool(31), 
cptTube(32), 
cptTank(33), 
cptUnit(34), 
cptVanPack(35), 
cptWrapped(36)

Default Value

Remarks

Identifies the Commodity item's packaging type. Possible values are:


cptBag (0)
cptBale (1)
cptBarrel (2)
cptBundle (3)
cptBin (4)
cptBox (5)
cptBasket (6)
cptBunch (7)
cptCabinet (8)
cptCan (9)
cptCarrier (10)
cptCase (11)
cptCarboy (12)
cptContainer (13)
cptCrate (14)
cptCask (15)
cptCarton (16)
cptCylinder (17)
cptDrum (18)
cptLoose (19)
cptOther (20)
cptPail (21)
cptPieces (22)
cptPackage (23)
cptPipe Line (24)
cptPallet (25)
cptRack (26)
cptReel (27)
cptRoll (28)
cptSkid (29)
cptSpool (30)
cptTube (31)
cptTank (32)
cptUnit (33)
cptVanPack (34)
cptWrapped (35)

NOTE: This field is only applicable to UPS freight.

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityNumberOfPieces Property (UPSFreightRates Control)

The total number of packages, cartons, or containers for the commodity line item.

Syntax

upsfreightratescontrol.CommodityNumberOfPieces(CommodityIndex)[=integer]

Default Value

Remarks

The total number of packages, cartons, or containers for the commodity line item.

In UPS, it is required and applicable to CO only.

In FedEx, if the Documents is set to False in ship request, the CommodityNumberOfPieces is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments.

This property is not applicable to USPS.

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityValue Property (UPSFreightRates Control)

The value of an individual item being shipped.

Syntax

upsfreightratescontrol.CommodityValue(CommodityIndex)[=string]

Default Value

Remarks

The value of an individual item being shipped. This should be provided for each item contained in the package being shipped. This property provides the value of the set of items. If the item is 2 boxes of 50 pens and the value of each box is $10.00, "20.00" (2 boxes x $10.00) should be entered. If the value of each pen is .25, then "25.00" (100 pens x .25) should be entered.

This property is only applicable to USPS and UPS freight.

Note: For USPS, the maximum value for this property is "99999.99".

Note: For UPS freight, the maximum value for this property is "99999999999999.99".

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityWeight Property (UPSFreightRates Control)

The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code.

Syntax

upsfreightratescontrol.CommodityWeight(CommodityIndex)[=string]

Default Value

"0.00"

Remarks

The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code. This weight does not include carrier equipment.

For FedEx, if the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityWeight is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

For UPS, this is required and applicable to CO and SED forms only .

When using USPS and PostageProvider is set to ppNone, the format of this property must be "XX lbs YY oz", where XX is the number of pounds and YY is the number of ounces.

However, in USPS, if PostageProvider is set to ppEndicia, then the format must be one explicit decimal position in ounces (i.e. N.N formatting).

The CommodityIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

DimensionalWeight Property (UPSFreightRates Control)

Represents the dimensional weight associated with the shipment.

Syntax

upsfreightratescontrol.DimensionalWeight

Default Value

Remarks

The dimensional weight as calculated by the server and returned in the response.

This property is read-only.

Data Type

String

FirewallAutoDetect Property (UPSFreightRates Control)

This property tells the control whether or not to automatically detect and use firewall system settings, if available.

Syntax

upsfreightratescontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

This property tells the control whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (UPSFreightRates Control)

This property determines the type of firewall to connect through.

Syntax

upsfreightratescontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. FirewallPort is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Data Type

Integer

FirewallHost Property (UPSFreightRates Control)

This property contains the name or IP address of firewall (optional).

Syntax

upsfreightratescontrol.FirewallHost[=string]

Default Value

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (UPSFreightRates Control)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

upsfreightratescontrol.FirewallPassword[=string]

Default Value

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (UPSFreightRates Control)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

upsfreightratescontrol.FirewallPort[=integer]

Default Value

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (UPSFreightRates Control)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

upsfreightratescontrol.FirewallUser[=string]

Default Value

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

HandlingUnit Property (UPSFreightRates Control)

Describe the Handling Units (Movable Pieces) in this Shipment.

Syntax

upsfreightratescontrol.HandlingUnit[=string]

Default Value

Remarks


Code	Handling Unit Type
SKD	SKID
CBY	CARBOY
PLT	PALLET
TOT	TOTES
LOO	LOOSE
OTH	OTHER

The first 4 codes are valid for handling unit one and the last two are valid for handling unit two. The type and value pair(s) should be entered as a string in this format: 'type1:value1; type2:value2'. For example: SKD:1; OTH:1'.

Data Type

String

OverSeasLegHeight Property (UPSFreightRates Control)

The height of the shipment.

Syntax

upsfreightratescontrol.OverSeasLegHeight[=integer]

Default Value

Remarks

The height of the shipment. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this property or the TotalShipmentCubicFeet before shipping.

Data Type

Integer

OverSeasLegLength Property (UPSFreightRates Control)

The length of the shipment.

Syntax

upsfreightratescontrol.OverSeasLegLength[=integer]

Default Value

Remarks

The length of the shipment. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this property or the TotalShipmentCubicFeet before shipping.

Data Type

Integer

OverSeasLegPricePerCubicFoot Property (UPSFreightRates Control)

The price per CubicFoot.

Syntax

upsfreightratescontrol.OverSeasLegPricePerCubicFoot[=string]

Default Value

Remarks

The price per CubicFoot.

Data Type

String

OverSeasLegPricePerCWT Property (UPSFreightRates Control)

Price per Hundredweight.

Syntax

upsfreightratescontrol.OverSeasLegPricePerCWT[=string]

Default Value

Remarks

Price per Hundredweight. For shipments with Puerto Rico as a destination, you may specify this amount before shipping.

Data Type

String

OverSeasLegTotalCubicFeet Property (UPSFreightRates Control)

Total cubic weight of the shipment, obtained by multiplying width by height by depth.

Syntax

upsfreightratescontrol.OverSeasLegTotalCubicFeet[=string]

Default Value

Remarks

Total cubic weight of the shipment, obtained by multiplying width by height by depth. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this amount before shipping.

Data Type

String

OverSeasLegWidth Property (UPSFreightRates Control)

The width of the shipment.

Syntax

upsfreightratescontrol.OverSeasLegWidth[=integer]

Default Value

Remarks

The width of the shipment. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this property or the TotalShipmentCubicFeet before shipping.

Data Type

Integer

PayorAddress1 Property (UPSFreightRates Control)

Street name.

Syntax

upsfreightratescontrol.PayorAddress1[=string]

Default Value

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. Combination of PayorAddress1 and PayorAddress2 should not exceed 35 characters.

Data Type

String

PayorAddress2 Property (UPSFreightRates Control)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

upsfreightratescontrol.PayorAddress2[=string]

Default Value

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. Combination of PayorAddress1 and PayorAddress2 should not exceed 35 characters.

Data Type

String

PayorCity Property (UPSFreightRates Control)

Name of city, town, etc.

Syntax

upsfreightratescontrol.PayorCity[=string]

Default Value

Remarks

Name of city, town, etc.

Data Type

String

PayorCountryCode Property (UPSFreightRates Control)

The country code for the payor of the shipment, or duties and taxes.

Syntax

upsfreightratescontrol.PayorCountryCode[=string]

Default Value

"US"

Remarks

The country code for the payor of the shipment, or duties and taxes.

When shipping via FedEx Express, the PayorCountryCode is required to be provided in the ship request only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. For FedEx Ground shipments, the PayorCountryCode is required only if PayorType is set to 'THIRDPARTY'.

For UPS, this should be the same as it was entered in the UPS system when this account was set up. In domestic shipments, it will always default to US.

Data Type

String

PayorName Property (UPSFreightRates Control)

Identifies the payor's name.

Syntax

upsfreightratescontrol.PayorName[=string]

Default Value

Remarks

Identifies the payor's name.

PayorName is required only if PayorType is set to 'THIRDPARTY'.

Note: This property is only applicable to UPSFreightRates and UPSFreightShip.

Data Type

String

PayorType Property (UPSFreightRates Control)

Method of payment for shipment, or duties and taxes.

Syntax

upsfreightratescontrol.PayorType[=integer]

Possible Values

ptSender(0), 
ptRecipient(1), 
ptThirdParty(2), 
ptCollect(3), 
ptConsignee(4)

Default Value

Remarks

Method of payment for shipment, or duties and taxes. This is required to be provided in a ship request. Valid payment types are:


ptSender (0)
ptRecipient (1)
ptThirdParty (2)
ptCollect (3)
ptConsignee (4)

The COLLECT payment type is only supported in FedEx Ground services. The CONSIGNEE type is only supported in UPS service.

For FedEx, when this property is set to a value other than 0 (ptSender), the PayorAccountNumber and PayorCountryCode are required to be provided in the request as well. Otherwise, those will default to FedExAccountNumber and SenderCountryCode.

For UPS, when set to ptSender, the PayorAccountNumber is automatically set to UPSAccountNumber. When ptRecipient is specified, PayorAccountNumber and PayorZipCode are required to be provided in the request. For return international shipments, this option is invalid for transportation charges. And, when ptThirdParty has been specified, the PayorAccountNumber, PayorZipCode and PayorCountryCode are required to be provided in the request. When ptConsignee is specified, it indicates that UPS Consignee Billing option is selected, no other fields need to be set. ptConsignee only applies to US/PR and PR/US shipment origins and destination.

Data Type

Integer

PayorState Property (UPSFreightRates Control)

State or province code.

Syntax

upsfreightratescontrol.PayorState[=string]

Default Value

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

PayorZipCode Property (UPSFreightRates Control)

Payor's postal code (if applicable).

Syntax

upsfreightratescontrol.PayorZipCode[=string]

Default Value

Remarks

Payor's postal code (if applicable).

This is only applicable to UPS and is the corresponding postal code of the UPS PayorAccountNumber's pickup address. This should be the same as it was entered in the UPS system when this account was set up.

It can be provided in a ship request only if the PayorType is set to 1 (RECIPIENT) or 2 (THIRDPARTY).

Maximum length: 10.

Data Type

String

ProxyAuthScheme Property (UPSFreightRates Control)

This property is used to tell the control which type of authorization to perform when connecting to the proxy.

Syntax

upsfreightratescontrol.ProxyAuthScheme[=integer]

Possible Values

authBasic(0), 
authDigest(1), 
authProprietary(2), 
authNone(3), 
authNtlm(4), 
authNegotiate(5)

Default Value

Remarks

This property is used to tell the control which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (UPSFreightRates Control)

This property tells the control whether or not to automatically detect and use proxy system settings, if available.

Syntax

upsfreightratescontrol.ProxyAutoDetect[=boolean]

Default Value

False

Remarks

This property tells the control whether or not to automatically detect and use proxy system settings, if available. The default value is .

Data Type

Boolean

ProxyPassword Property (UPSFreightRates Control)

This property contains a password if authentication is to be used for the proxy.

Syntax

upsfreightratescontrol.ProxyPassword[=string]

Default Value

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (UPSFreightRates Control)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

upsfreightratescontrol.ProxyPort[=integer]

Default Value

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (UPSFreightRates Control)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

upsfreightratescontrol.ProxyServer[=string]

Default Value

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (UPSFreightRates Control)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

upsfreightratescontrol.ProxySSL[=integer]

Possible Values

psAutomatic(0), 
psAlways(1), 
psNever(2), 
psTunnel(3)

Default Value

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:


psAutomatic (0)	Default setting. If the URL is an `https` URL, the control will use the `psTunnel` option. If the URL is an `http` URL, the control will use the `psNever` option.
psAlways (1)	The connection is always SSL enabled.
psNever (2)	The connection is not SSL enabled.
psTunnel (3)	The connection is made through a tunneling (HTTP) proxy.

Data Type

Integer

ProxyUser Property (UPSFreightRates Control)

This property contains a username if authentication is to be used for the proxy.

Syntax

upsfreightratescontrol.ProxyUser[=string]

Default Value

Remarks

This property contains a username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

RecipientAddress1 Property (UPSFreightRates Control)

Street name.

Syntax

upsfreightratescontrol.RecipientAddress1[=string]

Default Value

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS RecipientAddress1 should not exceed 35 characters.

Data Type

String

RecipientAddress2 Property (UPSFreightRates Control)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

upsfreightratescontrol.RecipientAddress2[=string]

Default Value

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS RecipientAddress2 should not exceed 35 characters.

Data Type

String

RecipientAddressFlags Property (UPSFreightRates Control)

Various flags that denote information about the address.

Syntax

upsfreightratescontrol.RecipientAddressFlags[=integer]

Default Value

Remarks

Various flags that denote information about the address.


Value	Meaning
0x00000001	POBox - Set this flag when using a P.O. Box for the address. This flag is only used by USPSShip and USPSShipIntl addresses.
0x00000002	Residential - Whether or not the address is a residential address. This flag is only relevant for UPS and FedEx, and if this flag is not set, the address is assumed to be commercial.

Data Type

Integer

RecipientCity Property (UPSFreightRates Control)

Name of city, town, etc.

Syntax

upsfreightratescontrol.RecipientCity[=string]

Default Value

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

RecipientCountryCode Property (UPSFreightRates Control)

Country code.

Syntax

upsfreightratescontrol.RecipientCountryCode[=string]

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.


Country Name	Country Code
Afghanistan	AF
Albania	AL
American Samoa	AS
Andorra	AD
Angola	AO
Anguilla	AI
Antigua	AG*
Argentina	AR
Armenia	AM
Aruba	AW
Australia	AU
Austria	AT
Azerbaijan	AZ
Bahamas	BS
Bahrain	BH
Bangladesh	BD
Barbados	BB
Barbuda	AG*
Belarus	BY
Belgium	BE
Belize	BZ
Benin	BJ
Bermuda	BM
Bhutan	BT
Bolivia	BO
Bonaire	AN**
Bosnia-Herzegovina	BA
Botswana	BW
Brazil	BR
British Virgin Islands	VG*
Brunei	BN
Bulgaria	BG
Burkina Faso	BF
Burundi	BI
Cambodia	KH
Cameroon	CM
Canada	CA
Canary Islands	ES**
Cape Verde	CV
Cayman Islands	KY**
Chad	TD
Channel Islands	GB**
Chile	CL
China	CN
Colombia	CO
Congo	CG
Congo Dem. Rep. Of	CD
Cook Islands	CK
Costa Rica	CR
Croatia	HR
Curacao	AN**
Cyprus	CY
Czech Republic	CZ
Denmark	DK
Djibouti	DJ
Dominica	DM
Dominican Republic	DO
East Timor	TL
Ecuador	EC
Egypt	EG
El Salvador	SV
England	GB**
Equatorial Guinea	GQ
Eritrea	ER
Estonia	EE
Ethiopia	ET
Faeroe Islands	FO*
Fiji	FJ
Finland	FI
France	FR
French Guiana	GF
French Polynesia	PF**
Gabon	GA
Gambia	GM
Georgia	GE
Germany	DE
Ghana	GH
Gibraltar	GI
Grand Cayman	KY**
Great Britain	GB**
Great Thatch Island	VG*
Great Tobago Islands	VG*
Greece	GR
Greenland	GL
Grenada	GD
Guadeloupe	GP**
Guam	GU
Guatemala	GT
Guinea	GN
Guyana	GY
Haiti	HT
Holland	NL**
Honduras	HN
Hong Kong	HK
Hungary	HU
Iceland	IS
India	IN
Indonesia	ID
Iraq	IQ
Ireland	IE
Israel	IL
Italy	IT**
Ivory Coast	CI
Jamaica	JM
Japan	JP
Jordan	JO
Jost Van Dyke Islands	VG*
Kazakhstan	KZ
Kenya	KE
Kuwait	KW
Kyrgyzstan	KG
Laos	LA
Latvia	LV
Lebanon	LB
Lesotho	LS
Liberia	LR
Liechtenstein	LI
Lithuania	LT
Luxembourg	LU
Macau	MO
Macedonia	MK
Madagascar	MG
Malawi	MW
Malaysia	MY
Maldives	MV
Mali	ML
Malta	MT
Marshall Islands	MH
Martinique	MQ
Mauritania	MR
Mauritius	MU
Mexico	MX
Micronesia	FM
Moldova	MD
Monaco	MC
Mongolia	MN
Montserrat	MS
Morocco	MA
Mozambique	MZ
Namibia	NA
Nepal	NP
Netherlands	NL**
Netherlands Antilles	AN**
New Caledonia	NC
New Zealand	NZ
Nicaragua	NI
Niger	NE
Nigeria	NG
Norman Island	VG*
Northern Ireland	GB**
Northern Mariana Islands	MP**
Norway	NO
Oman	OM
Pakistan	PK
Palau	PW
Palestine	PS*
Panama	PA
Papua New Guinea	PG
Paraguay	PY
Peru	PE
Philippines	PH
Poland	PL
Portugal	PT
Puerto Rico	PR
Qatar	QA
Reunion	RE
Romania	RO
Rota	MP**
Russia	RU
Rwanda	RW
Saba	AN**
Saipan	MP**
Samoa	WS
San Marino	IT**
Saudi Arabia	SA
Scotland	GB**
Senegal	SN
Serbia & Montenegro	CS
Seychelles	SC
Singapore	SG
Slovak Republic	SK
Slovenia	SI
South Africa	ZA
South Korea	KR
Spain	ES**
Sri Lanka	LK
St. Barthelemy	GP**
St. Christopher	KN**
St. Croix Island	VI**
St. Eustatius	AN**
St. John	VI**
St. Kitts and Nevis	KN**
St. Lucia	LC
St. Maarten	AN**
St. Thomas	VI**
St. Vincent	VC**
Suriname	SR
Swaziland	SZ
Sweden	SE
Switzerland	CH
Tahiti	PF**
Taiwan	TW
Tanzania	TZ
Thailand	TH
Tinian	MP**
Togo	TG
Tonga	TO
Tortola Island	VG*
Trinidad & Tobago	TT
Tunisia	TN
Turkey	TR
Turkmenistan	TM
Turks & Caicos Islands	TC
U.S. Virgin Islands	VI**
Uganda	UG
Ukraine	UA
Union Island	VC**
United Arab Emirates	AE
United Kingdom	GB**
United States	US
Uruguay	UY
Uzbekistan	UZ
Vanuatu	VU
Vatican City	IT**
Venezuela	VE
Vietnam	VN
Wales	GB**
Wallis & Futuna Islands	WF
Yemen	YE
Zambia	ZM
Zimbabwe	ZW

* Not supported by USPS

** Has multiple values, the values used for USPS are below


Country Name	Country Code
Cayman Islands	KY
French Polynesia	PF
Guadeloupe	GP
Italy	IT
Netherlands	NL
Netherlands Antilles	AN
Northern Mariana Islands	MP
Spain	ES
St. Kitts and Nevis	KN
St. Vincent	VC
United Kingdom	GB
U.S. Virgin Islands	VI

Data Type

String

RecipientState Property (UPSFreightRates Control)

State or province code.

Syntax

upsfreightratescontrol.RecipientState[=string]

Default Value

Remarks

Data Type

String

RecipientZipCode Property (UPSFreightRates Control)

Postal code.

Syntax

upsfreightratescontrol.RecipientZipCode[=string]

Default Value

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both RecipientCity and RecipientState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

RecipientName Property (UPSFreightRates Control)

Identifies the recipient's name or company name.

Syntax

upsfreightratescontrol.RecipientName[=string]

Default Value

Remarks

The recipient's name or company name.

Data Type

String

RequestedService Property (UPSFreightRates Control)

The service selected for the shipment.

Syntax

upsfreightratescontrol.RequestedService[=integer]

Possible Values

stUPSFreight(0), 
stUPSFreightGuaranteed(1)

Default Value

Remarks

Specifies the service for the shipment.

Valid values for UPS Freight are:


stUPSFreight (0)
stUPSFreightGuaranteed (1)

Data Type

Integer

SenderAddress1 Property (UPSFreightRates Control)

Street name.

Syntax

upsfreightratescontrol.SenderAddress1[=string]

Default Value

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS SenderAddress1 should not exceed 35 characters.

Data Type

String

SenderAddress2 Property (UPSFreightRates Control)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

upsfreightratescontrol.SenderAddress2[=string]

Default Value

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS SenderAddress2 should not exceed 35 characters.

Data Type

String

SenderCity Property (UPSFreightRates Control)

Name of city, town, etc.

Syntax

upsfreightratescontrol.SenderCity[=string]

Default Value

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

SenderCountryCode Property (UPSFreightRates Control)

Country code.

Syntax

upsfreightratescontrol.SenderCountryCode[=string]

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.


Country Name	Country Code
Afghanistan	AF
Albania	AL
American Samoa	AS
Andorra	AD
Angola	AO
Anguilla	AI
Antigua	AG*
Argentina	AR
Armenia	AM
Aruba	AW
Australia	AU
Austria	AT
Azerbaijan	AZ
Bahamas	BS
Bahrain	BH
Bangladesh	BD
Barbados	BB
Barbuda	AG*
Belarus	BY
Belgium	BE
Belize	BZ
Benin	BJ
Bermuda	BM
Bhutan	BT
Bolivia	BO
Bonaire	AN**
Bosnia-Herzegovina	BA
Botswana	BW
Brazil	BR
British Virgin Islands	VG*
Brunei	BN
Bulgaria	BG
Burkina Faso	BF
Burundi	BI
Cambodia	KH
Cameroon	CM
Canada	CA
Canary Islands	ES**
Cape Verde	CV
Cayman Islands	KY**
Chad	TD
Channel Islands	GB**
Chile	CL
China	CN
Colombia	CO
Congo	CG
Congo Dem. Rep. Of	CD
Cook Islands	CK
Costa Rica	CR
Croatia	HR
Curacao	AN**
Cyprus	CY
Czech Republic	CZ
Denmark	DK
Djibouti	DJ
Dominica	DM
Dominican Republic	DO
East Timor	TL
Ecuador	EC
Egypt	EG
El Salvador	SV
England	GB**
Equatorial Guinea	GQ
Eritrea	ER
Estonia	EE
Ethiopia	ET
Faeroe Islands	FO*
Fiji	FJ
Finland	FI
France	FR
French Guiana	GF
French Polynesia	PF**
Gabon	GA
Gambia	GM
Georgia	GE
Germany	DE
Ghana	GH
Gibraltar	GI
Grand Cayman	KY**
Great Britain	GB**
Great Thatch Island	VG*
Great Tobago Islands	VG*
Greece	GR
Greenland	GL
Grenada	GD
Guadeloupe	GP**
Guam	GU
Guatemala	GT
Guinea	GN
Guyana	GY
Haiti	HT
Holland	NL**
Honduras	HN
Hong Kong	HK
Hungary	HU
Iceland	IS
India	IN
Indonesia	ID
Iraq	IQ
Ireland	IE
Israel	IL
Italy	IT**
Ivory Coast	CI
Jamaica	JM
Japan	JP
Jordan	JO
Jost Van Dyke Islands	VG*
Kazakhstan	KZ
Kenya	KE
Kuwait	KW
Kyrgyzstan	KG
Laos	LA
Latvia	LV
Lebanon	LB
Lesotho	LS
Liberia	LR
Liechtenstein	LI
Lithuania	LT
Luxembourg	LU
Macau	MO
Macedonia	MK
Madagascar	MG
Malawi	MW
Malaysia	MY
Maldives	MV
Mali	ML
Malta	MT
Marshall Islands	MH
Martinique	MQ
Mauritania	MR
Mauritius	MU
Mexico	MX
Micronesia	FM
Moldova	MD
Monaco	MC
Mongolia	MN
Montserrat	MS
Morocco	MA
Mozambique	MZ
Namibia	NA
Nepal	NP
Netherlands	NL**
Netherlands Antilles	AN**
New Caledonia	NC
New Zealand	NZ
Nicaragua	NI
Niger	NE
Nigeria	NG
Norman Island	VG*
Northern Ireland	GB**
Northern Mariana Islands	MP**
Norway	NO
Oman	OM
Pakistan	PK
Palau	PW
Palestine	PS*
Panama	PA
Papua New Guinea	PG
Paraguay	PY
Peru	PE
Philippines	PH
Poland	PL
Portugal	PT
Puerto Rico	PR
Qatar	QA
Reunion	RE
Romania	RO
Rota	MP**
Russia	RU
Rwanda	RW
Saba	AN**
Saipan	MP**
Samoa	WS
San Marino	IT**
Saudi Arabia	SA
Scotland	GB**
Senegal	SN
Serbia & Montenegro	CS
Seychelles	SC
Singapore	SG
Slovak Republic	SK
Slovenia	SI
South Africa	ZA
South Korea	KR
Spain	ES**
Sri Lanka	LK
St. Barthelemy	GP**
St. Christopher	KN**
St. Croix Island	VI**
St. Eustatius	AN**
St. John	VI**
St. Kitts and Nevis	KN**
St. Lucia	LC
St. Maarten	AN**
St. Thomas	VI**
St. Vincent	VC**
Suriname	SR
Swaziland	SZ
Sweden	SE
Switzerland	CH
Tahiti	PF**
Taiwan	TW
Tanzania	TZ
Thailand	TH
Tinian	MP**
Togo	TG
Tonga	TO
Tortola Island	VG*
Trinidad & Tobago	TT
Tunisia	TN
Turkey	TR
Turkmenistan	TM
Turks & Caicos Islands	TC
U.S. Virgin Islands	VI**
Uganda	UG
Ukraine	UA
Union Island	VC**
United Arab Emirates	AE
United Kingdom	GB**
United States	US
Uruguay	UY
Uzbekistan	UZ
Vanuatu	VU
Vatican City	IT**
Venezuela	VE
Vietnam	VN
Wales	GB**
Wallis & Futuna Islands	WF
Yemen	YE
Zambia	ZM
Zimbabwe	ZW

* Not supported by USPS

** Has multiple values, the values used for USPS are below


Country Name	Country Code
Cayman Islands	KY
French Polynesia	PF
Guadeloupe	GP
Italy	IT
Netherlands	NL
Netherlands Antilles	AN
Northern Mariana Islands	MP
Spain	ES
St. Kitts and Nevis	KN
St. Vincent	VC
United Kingdom	GB
U.S. Virgin Islands	VI

Data Type

String

SenderState Property (UPSFreightRates Control)

State or province code.

Syntax

upsfreightratescontrol.SenderState[=string]

Default Value

Remarks

Data Type

String

SenderZipCode Property (UPSFreightRates Control)

Postal code.

Syntax

upsfreightratescontrol.SenderZipCode[=string]

Default Value

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both SenderCity and SenderState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

SenderName Property (UPSFreightRates Control)

Identifies the sender's locations name or company name.

Syntax

upsfreightratescontrol.SenderName[=string]

Default Value

Remarks

Data Type

String

SSLAcceptServerCertEncoded Property (UPSFreightRates Control)

This is the certificate (PEM/Base64 encoded).

Syntax

upsfreightratescontrol.SSLAcceptServerCertEncoded[=string]

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEncoded Property (UPSFreightRates Control)

This is the certificate (PEM/Base64 encoded).

Syntax

upsfreightratescontrol.SSLCertEncoded[=string]

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertStore Property (UPSFreightRates Control)

This is the name of the certificate store for the client certificate.

Syntax

upsfreightratescontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (UPSFreightRates Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

upsfreightratescontrol.SSLCertStorePassword[=string]

Default Value

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (UPSFreightRates Control)

This is the type of certificate store for this certificate.

Syntax

upsfreightratescontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

Remarks

This is the type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr control. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSLCertSubject Property (UPSFreightRates Control)

This is the subject of the certificate used for client authentication.

Syntax

upsfreightratescontrol.SSLCertSubject[=string]

Default Value

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Data Type

String

SSLProvider Property (UPSFreightRates Control)

This specifies the SSL/TLS implementation to use.

Syntax

upsfreightratescontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (UPSFreightRates Control)

This is the certificate (PEM/Base64 encoded).

Syntax

upsfreightratescontrol.SSLServerCertEncoded

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

Timeout Property (UPSFreightRates Control)

A timeout for the control.

Syntax

upsfreightratescontrol.Timeout[=integer]

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TotalCharge Property (UPSFreightRates Control)

Represents the total shipment charge.

Syntax

upsfreightratescontrol.TotalCharge

Default Value

Remarks

This property holds the total charge associated with the shipment. The value is represented in dollars and cents with two decimal places. For instance "1500.25".

This property is read-only.

Data Type

String

UPSAccountNumber Property (UPSFreightRates Control)

The shipper's UPS account number.

Syntax

upsfreightratescontrol.UPSAccountNumber[=string]

Default Value

Remarks

The shipper's UPS account number.

This property describes the shipper's 6- or 10- digit UPS account number.

Data Type

String

UPSAuthorizationToken Property (UPSFreightRates Control)

Authorization Token used to authenticate the request.

Syntax

upsfreightratescontrol.UPSAuthorizationToken[=string]

Default Value

Remarks

Authorization Token used to authenticate the request.

This field should be set to the value of a bearer token obtained through OAuth 2.0. For more information on getting a bearer token, see the documentation for the OAuth component.

Data Type

String

UPSServer Property (UPSFreightRates Control)

URL for the UPS server where the requests are sent.

Syntax

upsfreightratescontrol.UPSServer[=string]

Default Value

Remarks

URL for the UPS server where the requests are sent. This will overwrite the internal values that the component uses.

Normally, you do not need to set this property. By default, the component will send the request to the preset production end-point. In order to send request to the test environment, you must set the TESTMODE config to true like: component.Config("TESTMODE=true").

The following URLs may be used for testing:


control	Test URL
UPSAddress	https://wwwcie.ups.com/api/addressvalidation/
UPSFreightRate	https://wwwcie.ups.com/api/freight/
UPSFreightShip	https://wwwcie.ups.com/api/freight/
UPSRates	https://wwwcie.ups.com/api/rating/
UPSRates (ShippingTime)	https://wwwcie.ups.com/api/shipments/
UPSShip	https://wwwcie.ups.com/api/shipments/
UPSShip (Schedule Pickup)	https://wwwcie.ups.com/api/pickupcreation/
UPSShipIntl	https://wwwcie.ups.com/api/shipments/
UPSTrack	https://wwwcie.ups.com/api/track/
All (Void)	https://wwwcie.ups.com/api/shipments/

Data Type

String

Config Method (UPSFreightRates Control)

Sets or retrieves a configuration setting.

Syntax

upsfreightratescontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

GetRates Method (UPSFreightRates Control)

Returns rate information for a specified or all available UPS RequestedService s.

Syntax

upsfreightratescontrol.GetRates

Remarks

To get the courtesy rate quotes for UPS services, you can call the GetRates method. The RequestedService property identifies the UPS service for which you want to retrieve rate information.

Reset Method (UPSFreightRates Control)

Resets the internal state of the control and all properties to their default values.

Syntax

upsfreightratescontrol.Reset

Remarks

The Reset method does not have any parameters and does not return any value.

Error Event (UPSFreightRates Control)

Information about errors during data delivery.

Syntax

Sub upsfreightratescontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Notification Event (UPSFreightRates Control)

Notification returned by the server upon successful request (if applicable).

Syntax

Sub upsfreightratescontrol_Notification(Message As String)

Remarks

When sending a request, the server may return with a successful reply or an error. However, even when a transaction is successful, a warning or a note might still be returned by the server. In such cases, the Notification event is fired.

Notifications returned through this event are non-fatal and shipments will still be processes, labels will still be printable, rates are still returned, etc. These notifications should be treated as informational only.

SSLServerAuthentication Event (UPSFreightRates Control)

Fired after the server presents its certificate to the client.

Syntax

Sub upsfreightratescontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (UPSFreightRates Control)

Fired when secure connection progress messages are available.

Syntax

Sub upsfreightratescontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Config Settings (UPSFreightRates Control)

The control accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

UPSFreightRates Config Settings

AlternateDeliveryAddress: Alternate Delivery Address is used for Hold for Pickup or Delivery at UPS Access Points.

This field, if used, should be specified as a JSON and will be contained within the "AlternateDeliveryAddress" element of the request.

Sample JSON: component.Config(@"AlternateDeliveryAddress= ""AlternateDeliveryAddress: { ""Name"": ""THE UPS STORE"", ""AttentionName"": ""THE UPS STORE"", ""UPSAccessPointID"": "", ""Address"": { ""AddressLine"": [ ""1289 FORDHAM BLVD"" ], ""City"": ""Chapel Hill"", ""StateProvinceCode"": ""NC"", ""PostalCode"": ""27514-6110"", ""CountryCode"": ""US"" } }");

CurrencyCode: The currency code associated with the monetary values present in the request.

This is required to be provided if monetary values are specified in the request (such as COD amount, insured value, customs value, etc.). This must conform to ISO standards.

Maximum length: 3.

Here is a list of currency names and their codes used by UPS services.


Currency Name	Currency Code
AFGHANI	AFA
AFGHANI	AFG
ALGERIA	DZD
ALGERIAN DINAR	ALD
ARGENTINE PESO	ARN
ARGENTINE PESO	ARP
ARUBIAN CUR. CD	NAF
ARUBIAN GUILDER	AWG
AUSTRALIAN DOLLAR	AUD
AUSTRIAN EURO	EUR
BAHAMIAN DOLLAR	BSD
BAHRAINI DINAR	BHD
BAHT	BHT
BAHT	THB
BALBOA	BAL
BALBOA	PAB
BARBADOS DOLLAR	BBD
BARBADOS DOLLAR	BDD
BELGIUM EURO	EUR
BELIZE DOLLAR	BZD
BERMUDA DOLLAR	BMD
BERMUDAN DOLLAR	BED
BOLIVAR	VBO
BOLIVAR	VEB
BOLIVIAN PESO	BOP
BOSNIA DINAR	BAD
BRITISH POUND	UKL
BRUNEI DOLLAR	BND
BRUNEI DOLLAR	BRD
BURUNDI FRANC	BIF
BURUNDI FRANC	FRB
CANADIAN DOLLAR	CAD
CAYMAN DOLLAR	CID
CAYMAN DOLLAR	KYD
CEDI	GHC
CFA FRANC	AFR
CFA FRANC	XAF
CFA FRANC	XOF
CFP FRANC	PFR
CFP FRANC	XPF
CHILEAN PESO	CHP
CHILEAN PESO	CLP
COLOMBIAN PESO	COP
COMOROS FRANC	KMF
CONGO, DEMOCRATIC REPUBLIC OF	CDF
CORDOBA	COR
CORDOBA	NIC
COSTA RIC COLON	CRC
COSTA RICAN COLON	CFC
CP VERDE ESCUDO	CVE
CRUZEIRO	BRC
CRUZEIRO	CRU
CUBAN PESO	CUP
CYPRUS POUND	CYL
CYPRUS POUND	CYP
DALASI	GAD
DALASI	GMD
DANISH KRONE	DKK
DANISH KRONE	DKR
DEUTSCHE MARK	DMK
DJIBOUTI FRANC	DFR
DJIBOUTI FRANC	DJF
DOBRA	STD
DOMINICAN REP	DOP
DONG	VDD
DONG	VND
E.CARI.DOLLAR	ECD
EAST CARRIBEAN DOLLAR	XCD
EGYPTIAN POUND	EGL
EGYPTIAN POUND	EGP
EKWELE	GQE
EL SAL. COLON	SAC
EL SALVADOR COLON	SVC
ESTLAND KROWN	EKR
ESTONIA KRONERS	EEK
ETHIOPIAN BIRR	ETB
EURO	EUR
EUROP. CUR. UNT	XEU
FIJI DOLLAR	FID
FIJI DOLLAR	FJD
FINNISH EURO	EUR
FORINT	FOR
FORINT	HUF
FRANC CFA	CFA
FRENCH EURO	EUR
FRF FFR	HRK
GERMAN EUR	EUR
GIBRALTAR POUND	GBL
GIBRALTAR POUND	GIP
GOURDE	GOU
GOURDE	HTG
GREEK EURO	EUR
GUARANI	GUA
GUARANI	PYG
GUINEA-BISSAU PESO	GWP
GUINE-BS.PESO	GWE
GUYANA DOLLAR	GYD
HONG KONG DOLLAR	HKD
ICELAND KRONA	IKR
ICELAND KRONA	ISK
INDIAN RUPEE	RPS
INDIAN RUPES	INR
IRANIAN RIAL	IRI
IRANIAN RIAL	IRR
IRAQI DINAR	IQD
IRAQI DINAR	IRD
IRISH EURO	EUR
ITALIAN EURO	EUR
JAMAICAN DOLLAR	JAD
JAMAICAN DOLLAR	JMD
JAPANESE YEN	JPY
JAPANESE YEN	JYE
JORDANIAN DINAR	JOD
KENYA SCHILLING	KES
KINA	NGK
KINA	PGK
KIP	KIP
KIP	LAK
KORUNA	CKR
KORUNA	CSK
KORUNA	CZK
KORUNA	SKK
KUWAITI DINAR	KUD
KUWAITI DINAR	KWD
KWACHA	MWK
KWACHA	ZMK
KWANZA	AKZ
KWANZA	AOK
KYAT	BUK
KYAT	BUR
LEBANESE POUND	LBP
LEBANESE POUND	LEL
LEK	ALL
LEK	LEK
LEMPIRA	HNL
LEMPIRA	LEM
LEONE	SLE
LEONE	SLL
LEU	LEI
LEU	ROL
LEV	BGL
LEV	LEV
LIBERIAN DOLLAR	LID
LIBERIAN DOLLAR	LRD
LIBYAN DOLLAR	LBD
LIBYAN DOLLAR	LYD
LILANGENI	SZL
LITAS	UAH
LITHUANIA LITAS	LTL
LITHUANIA RUBLE	LTR
LUXEMBOURG FRANC	LFR
LUXEMBOURG FRANC	LUF
MALAGASY FRANC	FMG
MALAGASY FRANC	MGF
MALAYSIAN RINGGIT	MYR
MALDIVE RUPEE	MVR
MALETESE	MAL
MALI FRANC	MLF
MALOTI	LSM
MALTESE POUND	MTP
MARK DER DDR	MRK
MAURITIUS RUPEE	MAR
MAURITIUS RUPEE	MUR
MAYLASIAN RINGGIT	RGT
METICAL	ESM
METICAL	MZM
MEXICAN PESO	MEP
MEXICAN PESO	MXN
MEXICAN PESO	MXP
MOROCCAN DIRHAM	MAD
MOROCCAN DIRHAM	MDH
NAIRA	NGN
NAMIBIA DOLLARS	NAD
NEPALESE RUPEE	NER
NEPALESE RUPEE	NPR
NETH. AN GUILDER	AFL
NETHERLANDS ANTILLIAN GUILDER	ANG
NETHERLANDS EURO	EUR
NEW TAIWAN DOLLAR	NTD
NEW TAIWAN DOLLAR	TWD
NEW YUGOSLAVIAN DINAR	CTD
NEW YUGOSLAVIAN DINAR	YUD
NEW ZEALAND DOLLAR	NZD
NORWEGIAN KRONE	NKR
NORWEGIAN KRONE	NOK
OMANI RIAL	OMR
OMANI RIAL	RIO
OUGUIYA	MOG
OUGUIYA	MRO
PAANGA	TOP
PAKISTAN RUPEE	PKR
PAKSTAN RUPEE	PAR
PATACA	MOP
PHILLIPINE PESO	PHP
POLISH ZLOTY	PLN
PORTUGESE EURO	EUR
POUND STERLING	GBP
PULA	BTP
PULA	BWP
QATARI RIAL	QAR
QATARI RIAL	QRI
QUETZAL	GTO
QUETZAL	QUE
REPUBLIC OF CONGO (ZAIRE)	ZRN
RIEL	KHR
RIEL	RLS
ROUBLE	ROU
ROUBLE	SUR
RUPIAH	IDR
RUPIAH	RPA
RUSSIAN FEDERATION	RUB
RUSSIAN ROUBLE	RUR
RWANDA FRANC	FRR
RWANDA FRANC	RWF
S KOREAN WON	KRW
S KOREAN WON	WON
SAUDI RIAL	ARI
SCHEKEL	ISL
SEYCHELL.RUPEE	SCR
SEYCHELL.RUPEE	SER
SHEKEL	ILS
SINGAPORE DOLLAR	SGD
SINGAPORE DOLLAR	SID
SLOVENIA	SIT
SOL	PES
SOL	SOL
SOLOMON ISLANDS DOLLAR	SBD
SOMALI SHILLING	SOS
SOMALI SHILLING	SOM
SOUTH AFRICAN RAND	SAR
SOUTH AFRICAN RAND	ZAR
SPANISH EURO	EUR
SRI LANKA RUPEE	CER
SRI LANKA RUPEE	LKR
SRNME.GUILDER	SFL
SRNME.GUILDER	SRG
ST HELENA POUND	SHP
SUCRE	ECS
SUCRE	SUC
SUDANESE POUND	SDP
SUDANESE POUND	SUL
SWEDISH KRONA	SEK
SWEDISH KRONA	SKR
SWISS FRANC	SFR
SWISS FRANK	CHF
SYLI	GNS
SYLI	GSI
SYRIAN POUND	SYL
SYRIAN POUND	SYP
TAKA	BDT
TALA	SAT
TALA	WST
TIMOR ESCUDO	TPE
TNZN.SHILLING	TAS
TNZN.SHILLING	TZS
TRINIDAD AND TOBAGO DOLLAR	TTD
TUGRIK	MNT
TUGRUG	TUG
TUNISIAN DINAR	TND
TUNISIAN DINAR	TUD
TURKISH LIRA	TRL
TURKISH LIRA	TUL
UAE DIRHAM	ADH
UAE DIRHAM	AED
UGANDA SHILLING	UGS
URUGUAYAN PESO	NUP
URUGUAYAN PESO	UYP
US DOLLAR	USD
VATU	VUV
YEMENI DINAR	DYD
YEMENI DINAR	YDD
YEMENI RIAL	YEM
YEMENI RIAL	YER
YUAN RENMINBI	RMB
YUAN RENMINIBI	CNY
ZAIRE	ZAI
ZAIRE	ZRZ
ZIMBABWE DOLLAR	ZWD

CustomerTransactionId: Customer transaction id / customer context information.

This element allows you to assign a unique identifier to your transaction. This element is returned in the reply and helps you match requests to replies.

DeliveryOptions: Value-Added Freight Delivery Services.

The options can be combined. Possible values are:


Option	Value	Description
HolidayDelivery	0x0001	Normal business hours do not include nationally recognized holidays. When arrangements are made in advance, UPS Freight will pickup shipments on holidays.
InsideDelivery	0x0002	When requested, UPS Freight loads or unloads shipments from or to areas that are not next to the trailer such as shopping malls or office buildings. An elevator must be available to provide service to floors above or below the trailer.
LiftgateDelivery	0x0004	UPS Freight provides liftgate service, if needed, to load and unload a shipment when loading/unloading docks are not available.
ResidentialDelivery	0x0008	A residential pickup is any pickup from a home (including a business operating out of a home that does not have an entrance open to the public). An additional charge will apply.
WeekendDelivery	0x0010	Normal business hours do not include Saturdays and Sundays. When arrangements are made in advance, UPS Freight will pickup shipments on these days.
CallBeforeDelivery	0x0020	A request initiated by the Shipper for UPS Freight to call the customer as a condition necessary to deliver the shipment.

IncludeNegotiatedRates: Whether to include the NegotiatedRatesIndicator in the request.

This controls whether the NegotiatedRatesIndicator is sent in the request. When sent UPS will return the negotiated rates for the shipper account. When not sent UPS will return the standard, list rates. The default value is True.

NotificationDialect: Used to specify the dialect for Alternate Delivery Location notifications and UAP Shipper notifications.

Used to specify the dialect for Alternate Delivery Location notifications and UAP Shipper notifications. The default value is US

Possible Language / Dialect combinations:


Language	Dialect
CES	97
DAN	97
DEU	97
ELL	97
ENG	GB
ENG	US
ENG	CA
FIN	97
FRA	97
FRA	CA
HEB	97
HUN	97
ITA	97
NLD	97
NOR	97
POL	97
POR	97
RON	RO
RUS	97
SLK	97
SPA	97
SPA	PR
SWE	97
TUR	97
VIE	97
ZHO	TW

NotificationLanguage: Used to specify the language for Alternate Delivery Location notifications and UAP Shipper notifications.

Used to specify the language for Alternate Delivery Location notifications and UAP Shipper notifications. The default value is ENG

Refer to NotificationDialect configuration setting for possible Language / Dialect combinations.

PickupOptions: Value-Added Freight Pickup Services.

The options can be combined. Possible values are:


Option	Value	Description
HolidayPickup	0x0001	Normal business hours do not include nationally recognized holidays. When arrangements are made in advance, UPS Freight will pickup shipments on holidays.
InsidePickup	0x0002	When requested, UPS Freight loads or unloads shipments from or to areas that are not next to the trailer such as shopping malls or office buildings. An elevator must be available to provide service to floors above or below the trailer.
LiftgateService	0x0004	UPS Freight provides liftgate service, if needed, to load and unload a shipment when loading/unloading docks are not available.
ResidentialPickup	0x0008	A residential pickup is any pickup from a home (including a business operating out of a home that does not have an entrance open to the public). An additional charge will apply.
WeekendPickup	0x0010	Normal business hours do not include Saturdays and Sundays. When arrangements are made in advance, UPS Freight will pickup shipments on these days.

PiecesToSort: The number of pieces to sort and segregate.

Normal loading and unloading service does not include the sorting or segregating of freight by size, brand, flavor, individual lot, etc. If a shipment needs to be sorted or segregated, UPS Freight provides the service.

RawRequest: Contains the complete request sent to the Server.

This returns the complete request as sent to the server. Used for debugging purposes.

RawResponse: Contains the complete response returned by the Server.

This returns the complete response as received from the server. Used for debugging purposes.

RequestOption: Defines type of shipping desired.

Valid values are:


Value	Meaning
1	Ground
2	Air

ShipmentIndicationType: Whether shipment is Hold For Pickup or Delivery at UPS Access Points.

Required to indicate whether shipment is Hold For Pickup at UPS Access Point for use by approved shippers to identify a UPS Access Point location as an alternate delivery option during shipment preparation or UPS Access Point Delivery, to ship parcels directly to a UPS Access Point location for collection by the receiver.

This configuration setting is required when sending an alternate delivery address via the AlternateDeliveryAddress configuration setting.

Possible values:


Value	Description
1	Hold for Pickup at UPS Access Point
2	UPS Access Point Delivery

SubVersion: UPS SubVersion.

UPS uses sub version strategy to give back new elements in the response when there is no functionality change in the request or to enhance the existing functionality. Valid values are v1601, v1607, v1701, v1707, v1801, v1807, v2108, v2205.

This setting is only applicable when using UPS.

TaxInformationIndicator: Controls whether to send a TaxInformationIndicator.

This configuration setting controls whether to send a TaxInformationIndicator in the request or not. The default value is "false".

TESTMODE: This configuration setting will allow you to run test transactions.

When setting this configuration setting to True the transactions will be directed to the default testing end-point. component.Config("TESTMODE=true");

Default value is False, transactions are directed to the default production end-point.

Version: UPS API Version.

UPS API Version. Default value is "v1".

Warning: Warning message returned by the server.

This might be returned by the server even upon successful response. These warnings are usually informational.

WeightUnit: Weight unit.

It declares the type of weight unit to be used in calculating the weight of the shipment and each package contained in it.

Valid weight types are: LBS and KGS. Defaults to LBS if a value is not passed in the transaction. Depending on the selected country, the following measurement systems are valid: KGS/CM or LBS/IN (on domestic shipments, only the later combination is applicable). So, if the WeightUnit is set to KGS, its unit of measurements is set automatically to CM. Otherwise, it is set to IN (LBS/IN).

HTTP Config Settings

AcceptEncoding: Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the control adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The control only supports gzip and deflate decompression algorithms.

AllowHTTPCompression: This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the control will accept compressed data. It then will uncompress the data it has received. The control will handle data compressed by both gzip and deflate compression algorithms.

When True, the control adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback: Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the control will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the control fails with an error if the server does not support HTTP/2.

The default value is True.

Append: Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization: The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP control can be extended with other security schemes in addition to the authorization schemes already implemented by the control.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred: Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize: Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest: Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL: If set to True the URL will be encoded by the control.

If set to True, the URL passed to the control will be URL encoded. The default value is False.

FollowRedirects: Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the control returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the control fails with an error.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the control fails with an error instead.

Following are the valid options:

0 - Never
1 - Always
2 - Same Scheme

GetOn302Redirect: If set to True the control will perform a GET on the new location.

The default value is False. If set to True, the control will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing: HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion: The version of HTTP used by the control.

This property specifies the HTTP version used by the control. Possible values are as follows:

"1.0"
"1.1" (default)
"2.0"
"3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the control will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince: A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive: Determines whether the HTTP connection is closed after completion of the request.

If , the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If , the connection will be closed immediately after the server response is received.

The default value for KeepAlive is .

KerberosSPN: The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel: The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:


0 (None)	No events are logged.
1 (Info - default)	Informational events are logged.
2 (Verbose)	Detailed data are logged.
3 (Debug)	Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxRedirectAttempts: Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the control will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion: The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the control will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders: Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF (Chr$(13) & Chr$(10)) .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the control beyond what is provided.

ProxyAuthorization: The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

ProxyAuthScheme: The authorization scheme to be used for the proxy.

This configuration setting is provided for use by controls that do not directly expose Proxy properties.

ProxyPassword: A password if authentication is to be used for the proxy.

This configuration setting is provided for use by controls that do not directly expose Proxy properties.

ProxyPort: Port for the proxy server (default 80).

This configuration setting is provided for use by controls that do not directly expose Proxy properties.

ProxyServer: Name or IP address of a proxy server (optional).

This configuration setting is provided for use by controls that do not directly expose Proxy properties.

ProxyUser: A user name if authentication is to be used for the proxy.

This configuration setting is provided for use by controls that do not directly expose Proxy properties.

SentHeaders: The full set of headers as sent by the client.

This configuration setting returns the complete set of raw headers as sent by the client.

StatusCode: The status code of the last response from the server.

This configuration setting contains the result code of the last response from the server.

StatusLine: The first line of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

TransferredData: The contents of the last response from the server.

This configuration setting contains the contents of the last response from the server.

TransferredDataLimit: The maximum number of incoming bytes to be stored by the control.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the control.

TransferredHeaders: The full set of headers as received from the server.

This configuration setting returns the complete set of raw headers as received from the server.

TransferredRequest: The full request as sent by the client.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

UseChunkedEncoding: Enables or Disables HTTP chunked encoding for transfers.

If UseChunkedEncoding is set to True, the control will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the control will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

UseIDNs: Whether to encode hostnames to internationalized domain names.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.

UseProxyAutoConfigURL: Whether to use a Proxy auto-config file when attempting a connection.

This configuration specifies whether the control will attempt to use the Proxy auto-config URL when establishing a connection and ProxyAutoDetect is set to True.

When True (default), the control will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

UserAgent: Information about the user agent (browser).

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the control will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the control whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by controls that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by controls that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

The appropriate values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the control fails with an error.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the control returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface.

If the control is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the control binds.

This must be set before a connection is attempted. It instructs the control to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the control will use IPv4 exclusively. When set to 1, the control will use IPv6 exclusively. To instruct the control to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the control will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the control is the same.

SSLCACerts: A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the control will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the control will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The control will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the control fails with an error.

When set to 0 (default) the CRL check will not be performed by the control. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP: Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the control will use OCSP to check the validity of the server certificate. If set to 1 or 2, the control will first obtain the OCSP URL from the server certificate's OCSP extension. The control will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the control fails with an error.

When set to 0 (default) the control will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the control will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when SSLProvider is set to Internal:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA");

Possible values when SSLProvider is set to Internal include:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30) [Platform Only]
SSL2	12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the control will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

The platform provider is only available on Windows 11 / Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the control when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is by default, but can be set to to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the control will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the control will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion: Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown Certificate Authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown Certificate Authority revocation status.
0x00000800	Ignore unknown Root revocation status.
0x00008000	Allow test Root certificate.
0x00004000	Trust test Root certificate.
0x80000000	Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the control will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the control fails with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the control is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the control is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to to mask sensitive data. The default is .

This setting only works on these controls: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to , the control will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to tells the control to use the internal implementation instead of using the system security libraries.

This setting is set to by default on all platforms.

Trappable Errors (UPSFreightRates Control)

UPSFreightRates Errors


	20302 Operation interrupted (or timeout).
	20433 Invalid index.
	20528 Server Error Response.
	20529 Property set with invalid data.
	20561 Missing data.

The control may also return one of the following error codes, which are inherited from other controls.