FedExFreightRates Control

Properties   Methods   Events   Config Settings   Errors  

Provides access to pre-ship rate information for a freight shipment per your established FedEx account rates.

Syntax

FedExFreightRates

Remarks

When providing origin, destination information, weight, and service, this control allows a user to obtain a rate quote for a specific service, or a list of available FedEx Express services with the respective rate quotes.

You can send a rate request to FedEx by calling the GetRates method for a specific FedEx service (when RequestedService is specified). The control will return rates for packages based on a combination of origin, destination, service type, weight, and package type. This also checks if the requested service is available, checks your origin/destination pair and ship date to determine whether the service you requested is a valid service type.

Discount rates are available for all services and origin/destination pairs. List rates are available for Express and Ground U.S. shipments only. To have list rates returned with your discount rates, you must set the RateType to 0 (rtList). This way, you will receive both discount and list rates.

When requesting a rate quote, include as much detail as possible about your shipment. This information is important for calculating the correct shipping costs with surcharges.

Rating for a Multiple Package Shipment (MPS) is available for: Express U.S. Domestic and International multiple package shipments, Ground US Domestic and International multiple-package shipments, Express Domestic C.O.D. and International C.O.D. multiple-package shipments and Ground Domestic C.O.D. and International C.O.D. multiple-package shipments.

Please note that all rate quotes are estimates only and may differ from the actual invoiced amount.

With the FedExFreightRates Control, you can:

• Ensure service availability (after you provide the carrier code, service type, origination & destination postal codes, packaging type, drop-off type, and estimated weight);
• Retrieve the rate required for that shipment.

The restrictions on the allowed property values are listed separately under each control property description. If the user enters more than the allowed number of characters, an error will not be generated. The control will simply pass in the characters provided and the server may disregard the extra characters. This is important since the resulting value could prevent a correct response.

To use this control, you must have a FedEx FedExAccountNumber. You should also have already obtained a ClientId and ClientSecret; uniquely assigned to your account by FedEx.

Property List

---

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

CODTotalAmount Property (FedExFreightRates Control)

The total amount to be collected on delivery.

Syntax

fedexfreightratescontrol.CODTotalAmount[=string]

Default Value

""

Remarks

This indicates customer's total COD amount (prior to any accumulations: total collection amount minus transportation charges). The CODTotalAmount is required to be provided in a ship request only if the corresponding flag of COD is contained in the ShipmentSpecialServices property.

For Ground COD shipments, the COD amount must be included on each package that uses COD service by setting the PackageCODAmount and the corresponding flag of COD is contained in the PackageSpecialServices field.

Format: Two explicit decimals (e.g.5.00).

Data Type

String

CODType Property (FedExFreightRates Control)

COD type.

Syntax

fedexfreightratescontrol.CODType[=integer]

Possible Values

codtAny(0), 
codtCash(1), 
codtGuaranteedFunds(2), 
codtCompanyCheck(3), 
codtPersonalCheck(4)

Default Value

0

Remarks

This property identifies the type of funds FedEx should collect upon package delivery. It is required to be provided in a ship request only if the COD is present (requested) in the ShipmentSpecialServices.

Possible values are as follows:

Data Type

Integer

CommodityCount Property (FedExFreightRates Control)

The number of records in the Commodity arrays.

Syntax

fedexfreightratescontrol.CommodityCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• CommodityDescription
• CommodityFreightClass
• CommodityFreightPackagingType
• CommodityHandlingUnits
• CommodityHarmonizedCode
• CommodityHazardousMaterialsOptions
• CommodityHeight
• CommodityId
• CommodityLength
• CommodityManufacturer
• CommodityNmfcCode
• CommodityNumberOfPieces
• CommodityPartNumber
• CommodityPONumber
• CommodityQuantity
• CommodityQuantityUnit
• CommodityUnitPrice
• CommodityValue
• CommodityVolume
• CommodityWeight
• CommodityWidth

The array indices start at 0 and end at CommodityCount - 1.

This property is not available at design time.

Data Type

Integer

CommodityDescription Property (FedExFreightRates Control)

Complete and accurate description of this commodity line item.

Syntax

fedexfreightratescontrol.CommodityDescription(CommodityIdx)[=string]

Default Value

""

Remarks

Complete and accurate description of this commodity line item.

It is applicable to all international forms and freight shipments. Optional for Partial Invoice and required for the rest of form types.

Specific description of the type of equipment and its intended use is required. Clearance delays may result if the contents are not completely and accurately described. Vague description will not be accepted by Customs. Only a portion of this field will print on the label.

If the shipment contains documents only (i.e., Documents is set to True), then the CommodityDescription has to be set to an approved value. The following table lists document descriptions approved by U.S. Customs.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityFreightClass Property (FedExFreightRates Control)

Indicates the freight class of the commodity.

Syntax

fedexfreightratescontrol.CommodityFreightClass(CommodityIdx)[=integer]

Possible Values

fc50(0), 
fc55(1), 
fc60(2), 
fc65(3), 
fc70(4), 
fc77_5(5), 
fc85(6), 
fc92_5(7), 
fc100(8), 
fc110(9), 
fc125(10), 
fc150(11), 
fc175(12), 
fc200(13), 
fc250(14), 
fc300(15), 
fc400(16), 
fc500(17)

Default Value

0

Remarks

Indicates the freight class of the commodity.

The following table lists freight classes available from FedEx freight services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityFreightPackagingType Property (FedExFreightRates Control)

Identifies the Commodity item's packaging type.

Syntax

fedexfreightratescontrol.CommodityFreightPackagingType(CommodityIdx)[=integer]

Possible Values

fcptNone(0), 
fcptBag(1), 
fcptBarrel(2), 
fcptBasket(3), 
fcptBox(4), 
fcptBucket(5), 
fcptBundle(6), 
fcptCage(7), 
fcptCarton(8), 
fcptCase(9), 
fcptChest(10), 
fcptContainer(11), 
fcptCrate(12), 
fcptCylinder(13), 
fcptDrum(14), 
fcptEnvelope(15), 
fcptHamper(16), 
fcptOther(17), 
fcptPackage(18), 
fcptPail(19), 
fcptPallet(20), 
fcptParcel(21), 
fcptPiece(22), 
fcptReel(23), 
fcptRoll(24), 
fcptSack(25), 
fcptShrinkwrapped(26), 
fcptSkid(27), 
fcptTank(28), 
fcptTotebin(29), 
fcptTube(30), 
fcptUnit(31)

Default Value

0

Remarks

Identifies the Commodity item's packaging type. Possible values are:

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityHandlingUnits Property (FedExFreightRates Control)

Number of individual handling units to which this commodity applies.

Syntax

fedexfreightratescontrol.CommodityHandlingUnits(CommodityIdx)[=integer]

Default Value

1

Remarks

Number of individual handling units to which this commodity applies. (NOTE: Total of commodity-level handling units may not balance to shipment-level total handling units.)

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityHarmonizedCode Property (FedExFreightRates Control)

Unique code representing this commodity line item (for imports only).

Syntax

fedexfreightratescontrol.CommodityHarmonizedCode(CommodityIdx)[=string]

Default Value

""

Remarks

Unique code representing this commodity line item (for imports only).

The World Trade Organization has classified all commodities with a number. This number is called a Harmonized Schedule code and ranges from six to 12 digits depending on the country. However, the first six digits of this number are more or less uniform throughout the world. Customs uses the HS number to determine the import duties, taxes and import license requirements for goods entering a country. This number is required for filling in the Customs documentation.

It is applicable to Invoice, Partial Invoice and NAFTA CO. Required for NAFTA CO and optional for Partial Invoice. For NAFTA CO: For each good described in CommodityDescription, identify the Harmonized Schedule (HS) tariff classification using the one of the country into whose territory the good is imported. This number must appear on import documentation that accompanies a shipment.

If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityHarmonizedCode is required for each commodity line item for shipments to EU countries.

At least one occurrence is required for U.S. Export shipments if the TotalCustomsValue is greater than 2,500 USD or if a valid U.S. Export license is required.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityHazardousMaterialsOptions Property (FedExFreightRates Control)

Indicates the kind of hazardous material content in this commodity.

Syntax

fedexfreightratescontrol.CommodityHazardousMaterialsOptions(CommodityIdx)[=integer]

Default Value

0

Remarks

Indicates the kind of hazardous material content in this commodity.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to include multiple options:

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityHeight Property (FedExFreightRates Control)

The height of the commodity.

Syntax

fedexfreightratescontrol.CommodityHeight(CommodityIdx)[=integer]

Default Value

1

Remarks

The height of the commodity.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityId Property (FedExFreightRates Control)

A unique identifier assigned to this line item.

Syntax

fedexfreightratescontrol.CommodityId(CommodityIdx)[=string]

Default Value

""

Remarks

A unique identifier assigned to this line item.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityLength Property (FedExFreightRates Control)

The width of the commodity.

Syntax

fedexfreightratescontrol.CommodityLength(CommodityIdx)[=integer]

Default Value

1

Remarks

The width of the commodity.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityManufacturer Property (FedExFreightRates Control)

Country code where the contents of this commodity line were produced, manufactured or grown in their final form.

Syntax

fedexfreightratescontrol.CommodityManufacturer(CommodityIdx)[=string]

Default Value

"US"

Remarks

Country code where the contents of this commodity line were produced, manufactured or grown in their final form. In international shipment requests, the CommodityManufacturer is required to be entered.

In FedEx, when the shipment contains documents only (i.e., Documents is set to True), this represent the country where the documents were compiled and/or produced in their final form. In this case, only the CommodityManufacturer and CommodityDescription are required to be provided in the request. If the CommodityManufacturer is not provided, it defaults to US.

When the shipment contains non-documents items (i.e., Documents is set to False and the shipment is considered dutiable), at least one occurrence of a commodity item is required to be entered. The CommodityManufacturer has to be provided for each commodity item included in that international shipment.

In UPS, this applies to Invoice, Partial Invoice, CO and NAFTA CO. It is required for Invoice and CO forms, and optional for Partial Invoice.

Here is a list of country names and their codes where UPS services are available. Code is the value that has to be provided in all requests sent to UPS where country code is to be entered. This is also echoed in server reply.

Along with country names and their codes, we have also listed here the currency code used in that country, the maximum weight applicable to that country, whether address validation is supported and if postal code is required.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityNmfcCode Property (FedExFreightRates Control)

NMFC Code for commodity.

Syntax

fedexfreightratescontrol.CommodityNmfcCode(CommodityIdx)[=string]

Default Value

""

Remarks

NMFC Code for commodity.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityNumberOfPieces Property (FedExFreightRates Control)

The total number of packages, cartons, or containers for the commodity line item.

Syntax

fedexfreightratescontrol.CommodityNumberOfPieces(CommodityIdx)[=integer]

Default Value

1

Remarks

The total number of packages, cartons, or containers for the commodity line item.

If the Documents is set to False in ship request, the CommodityNumberOfPieces is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityPartNumber Property (FedExFreightRates Control)

The part number of this commodity line item.

Syntax

fedexfreightratescontrol.CommodityPartNumber(CommodityIdx)[=string]

Default Value

""

Remarks

The part number of this commodity line item.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityPONumber Property (FedExFreightRates Control)

The PO Number for printed reference per commodity.

Syntax

fedexfreightratescontrol.CommodityPONumber(CommodityIdx)[=string]

Default Value

""

Remarks

The PO Number for printed reference per commodity.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityQuantity Property (FedExFreightRates Control)

Number of units contained in this commodity line item measured in units specified by the QuantityUnit .

Syntax

fedexfreightratescontrol.CommodityQuantity(CommodityIdx)[=integer]

Default Value

1

Remarks

Number of units contained in this commodity line item measured in units specified by the CommodityQuantityUnit. This is used in conjunction with the CommodityQuantityUnit and CommodityUnitPrice.

If the Documents is set to False in ship request, the CommodityQuantity is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityQuantityUnit Property (FedExFreightRates Control)

Unit of measure used to express the Quantity of this commodity line item.

Syntax

fedexfreightratescontrol.CommodityQuantityUnit(CommodityIdx)[=string]

Default Value

"EA"

Remarks

Unit of measure used to express the CommodityQuantity of this commodity line item.

If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityQuantityUnit is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

Here is a list of possible values for FedEx:

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityUnitPrice Property (FedExFreightRates Control)

Value of each QuantityUnit in Quantity of this commodity line item.

Syntax

fedexfreightratescontrol.CommodityUnitPrice(CommodityIdx)[=string]

Default Value

"1.00"

Remarks

Value of each CommodityQuantityUnit in CommodityQuantity of this commodity line item. This is used in conjunction with the CommodityQuantityUnit and CommodityQuantity. This indicates the monetary amount used to specify the worth or price of the commodity and it should be greater than zero.

When the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityUnitPrice is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

Format: Limit to 6 digits after the decimal (e.g. 900.000000).

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityValue Property (FedExFreightRates Control)

The value of an individual item being shipped.

Syntax

fedexfreightratescontrol.CommodityValue(CommodityIdx)[=string]

Default Value

""

Remarks

The value of an individual item being shipped. This should be provided for each item contained in the package being shipped. This property provides the value of the set of items. If the item is 2 boxes of 50 pens and the value of each box is $10.00, "20.00" (2 boxes x $10.00) should be entered. If the value of each pen is .25, then "25.00" (100 pens x .25) should be entered.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityVolume Property (FedExFreightRates Control)

This should contain the volume of the freight item.

Syntax

fedexfreightratescontrol.CommodityVolume(CommodityIdx)[=string]

Default Value

"0.0"

Remarks

This should contain the volume of the freight item. This should be specified in cubic feet if SizeUnit is set to IN and cubic meters if SizeUnit is set to CM.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityWeight Property (FedExFreightRates Control)

The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code.

Syntax

fedexfreightratescontrol.CommodityWeight(CommodityIdx)[=string]

Default Value

"0.00"

Remarks

The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code. This weight does not include carrier equipment.

If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityWeight is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityWidth Property (FedExFreightRates Control)

The width of the commodity.

Syntax

fedexfreightratescontrol.CommodityWidth(CommodityIdx)[=integer]

Default Value

1

Remarks

The width of the commodity.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

FedExAccountNumber Property (FedExFreightRates Control)

The account number associated with the shipment.

Syntax

fedexfreightratescontrol.FedExAccountNumber[=string]

Default Value

""

Remarks

The account number associated with the shipment.

The FedExAccountNumber is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity.

Data Type

String

FedExAuthorizationToken Property (FedExFreightRates Control)

Authorization Token used to authenticate the request.

Syntax

fedexfreightratescontrol.FedExAuthorizationToken[=string]

Default Value

""

Remarks

Authorization Token used to authenticate the request.

This field should be set to the value of a bearer token obtained through OAuth 2.0. For more information on getting a bearer token, see the documentation for the OAuth component.

Data Type

String

FedExLanguageCode Property (FedExFreightRates Control)

Two-letter code for the language (e.

Syntax

fedexfreightratescontrol.FedExLanguageCode[=string]

Default Value

"en"

Remarks

Two-letter code for the language (e.g. en, fr, etc.).

This field allows you to assign the language code. Default value is en.

Data Type

String

FedExLocaleCode Property (FedExFreightRates Control)

Two-letter code for the region (e.

Syntax

fedexfreightratescontrol.FedExLocaleCode[=string]

Default Value

"US"

Remarks

Two-letter code for the region (e.g. US, CA, etc.).

Some languages require a locale code to further identify the language. Default value is US.

Data Type

String

FedExServer Property (FedExFreightRates Control)

URL for the FedEx Server where the requests are sent.

Syntax

fedexfreightratescontrol.FedExServer[=string]

Default Value

""

Remarks

URL for the FedEx Server where the requests are sent. This will overwrite the internal values that the component uses.

Normally, you do not need to set this property. By default, the component will send the request to the preset production end-point. In order to send request to the test environment, you must set the TESTMODE config to true like: component.Config("TESTMODE=true").

Data Type

String

FirewallAutoDetect Property (FedExFreightRates Control)

This property tells the control whether or not to automatically detect and use firewall system settings, if available.

Syntax

fedexfreightratescontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

This property tells the control whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (FedExFreightRates Control)

This property determines the type of firewall to connect through.

Syntax

fedexfreightratescontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (FedExFreightRates Control)

This property contains the name or IP address of firewall (optional).

Syntax

fedexfreightratescontrol.FirewallHost[=string]

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (FedExFreightRates Control)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

fedexfreightratescontrol.FirewallPassword[=string]

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (FedExFreightRates Control)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

fedexfreightratescontrol.FirewallPort[=integer]

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (FedExFreightRates Control)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

fedexfreightratescontrol.FirewallUser[=string]

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

FreightGuaranteeDate Property (FedExFreightRates Control)

The date the freight shipment is guaranteed for.

Syntax

fedexfreightratescontrol.FreightGuaranteeDate[=string]

Default Value

""

Remarks

The date the freight shipment is guaranteed for.

The valid format for the date is YYYY-MM-DD

Data Type

String

FreightGuaranteeType Property (FedExFreightRates Control)

Specifies what type of freight guarantee is requested.

Syntax

fedexfreightratescontrol.FreightGuaranteeType[=integer]

Possible Values

fgtGuaranteedDate(0), 
fgtGuaranteedMorning(1)

Default Value

0

Remarks

Specifies what type of freight guarantee is requested.

The valid values are:

Data Type

Integer

InsuredValue Property (FedExFreightRates Control)

The total amount of insurance requested for the shipment being rated.

Syntax

fedexfreightratescontrol.InsuredValue[=string]

Default Value

"0.00"

Remarks

This property is optional to be provided in the rate request, and if present, this will affect the rates and service availability.

Format: Two explicit decimal positions (e.g. 100.00). Total length including decimal position: 11.

Data Type

String

PackageCount Property (FedExFreightRates Control)

The number of records in the Package arrays.

Syntax

fedexfreightratescontrol.PackageCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• PackageDescription
• PackageHeight
• PackageId
• PackageInsuredValue
• PackageLength
• PackageSignatureType
• PackageSpecialServices
• PackageType
• PackageWeight
• PackageWidth

The array indices start at 0 and end at PackageCount - 1.

This property is not available at design time.

Data Type

Integer

PackageDescription Property (FedExFreightRates Control)

For FedEx, this is the description that appears in the email to identify this package.

Syntax

fedexfreightratescontrol.PackageDescription(PackageIdx)[=string]

Default Value

""

Remarks

For FedEx, this is the description that appears in the email to identify this package. This is optional.

For UPS, this is applicable and required for shipments with return service only.

This does not apply for USPS and Canada Post.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageHeight Property (FedExFreightRates Control)

The height of the package to be shipped.

Syntax

fedexfreightratescontrol.PackageHeight(PackageIdx)[=integer]

Default Value

0

Remarks

The height of the package to be shipped.

For FedEx, the PackageHeight is optional, but recommended, if "Your Packaging" is used as PackagePackagingType. This is required if PackageLength and PackageWidth are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When PackageWidth is provided in the request, then all other dimensions (PackageLength and PackageHeight) are to be set as well.

For USPS, this only applies to GetRates and is only required if the package is irregular and the PackagePackagingType property is set to ptNonRectangular. (In this case PackageWidth and PackageHeight must still be set). For parcels, PackageLength is the measurement of the longest dimension and PackageWidth and PackageHeight make up the other two dimensions. PackageGirth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the PackageLength, PackageWidth, and PackageHeight are required for Priority Mail packages when the PackageSize is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the Shortest dimension (3.1 digits e.g. 999.9 pattern).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageId Property (FedExFreightRates Control)

An 8-digit Unique Parcel Identification Number.

Syntax

fedexfreightratescontrol.PackageId(PackageIdx)[=string]

Default Value

""

Remarks

An 8-digit Unique Parcel Identification Number.

Unique number used to identify the package. This property is optional, and only applies to USPS return labels.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageInsuredValue Property (FedExFreightRates Control)

Amount of insurance requested for this package.

Syntax

fedexfreightratescontrol.PackageInsuredValue(PackageIdx)[=string]

Default Value

""

Remarks

Amount of insurance requested for this package. The value has 2 explicit decimal position and has a maximum of 11 characters including the decimal.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageLength Property (FedExFreightRates Control)

The length of the package to be shipped.

Syntax

fedexfreightratescontrol.PackageLength(PackageIdx)[=integer]

Default Value

0

Remarks

The length of the package to be shipped.

For FedEx, the PackageLength is optional, but recommended, if "Your Packaging" is used as PackagePackagingType. This is required if PackageWidth and PackageHeight are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments. Length must be the longest dimension of the container.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When PackageWidth is provided in the request, then all other dimensions (PackageLength and PackageHeight) are to be set as well.

Valid values are 0 to 108 IN and 0 to 270 CM.

For USPS, this is only required if the package is irregular and the PackagePackagingType property is set to ptNonRectangular. (In this case PackageWidth and PackageHeight must still be set).

Note: For parcels, the PackageLength is the measurement of the longest dimension and PackageWidth and PackageHeight make up the other two dimensions. PackageGirth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the PackageLength, PackageWidth, and PackageHeight are required for Priority Mail packages when the PackageSize is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the longest dimension (3.1 digits e.g. 999.9 pattern).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageType Property (FedExFreightRates Control)

The packaging type of the package being rated and/or shipped.

Syntax

fedexfreightratescontrol.PackageType(PackageIdx)[=integer]

Possible Values

ptNone(0), 
ptPostcards(1), 
ptLetter(2), 
ptLargeEnvelope(3), 
ptFlatRateEnvelope(4), 
ptFlatRateLegalEnvelope(5), 
ptFlatRatePaddedEnvelope(6), 
ptFlatRateGiftCardEnvelope(7), 
ptFlatRateWindowEnvelope(8), 
ptFlatRateCardboardEnvelope(9), 
ptSmallFlatRateEnvelope(10), 
ptPak(11), 
ptBox(12), 
pt10kgBox(13), 
pt25kgBox(14), 
ptSmallExpressBox(15), 
ptMediumExpressBox(16), 
ptLargeExpressBox(17), 
ptFlatRateBox(18), 
ptSmallFlatRateBox(19), 
ptMediumFlatRateBox(20), 
ptLargeFlatRateBox(21), 
ptDVDFlatRateBox(22), 
ptLargeVideoFlatRateBox(23), 
ptRegionalRateBoxA(24), 
ptRegionalRateBoxB(25), 
ptRectangular(26), 
ptNonRectangular(27), 
ptTube(28), 
ptMatterForTheBlind(29), 
ptPallet(30), 
ptYourPackaging(31), 
ptDocument(32), 
ptFlats(33), 
ptParcels(34), 
ptBPM(35), 
ptFirstClass(36), 
ptPriority(37), 
ptMachinables(38), 
ptIrregulars(39), 
ptParcelPost(40), 
ptBPMParcel(41), 
ptMediaMail(42), 
ptBPMFlat(43), 
ptStandardFlat(44), 
ptRegionalRateBoxC(45), 
ptThickEnvelope(46), 
ptSmallBox(47), 
ptMediumBox(48), 
ptLargeBox(49), 
ptExtraLargeBox(50), 
ptPackageService(51), 
ptCubicParcels(52), 
ptCubicSoftPack(53)

Default Value

0

Remarks

The packaging type of the package being rated and/or shipped.

Possible values are:

If this is set to a value that is not applicable to a certain provider, it will automatically be set to ptNone (0).

For FedEx, this is required in a ship request when either the GetPackageLabel or GetShipmentLabels method is called. FedEx only supports one packaging type for the whole shipment, so only the PackagePackagingType for the first package is used in label requests.

If the PackagePackagingType is set to 31 (Your Packaging), then the dimensions of the package should be provided in the request by setting the following: PackageLength, PackageWidth, and PackageHeight.

If the ServiceType is set to any of the FedEx Ground services (Ground or Ground Home Delivery), then the PackagePackagingType will be automatically set to 31 (Your Packaging).

Please note that the types pt10kgBox (13) and pt25kgBox (14) are only meant for international shipments and domestic shipments outside of the United States.

For UPS, please note that when selecting PackagePackagingType make sure this is valid for all the following: SenderCountryCode, RecipientCountryCode, ServiceType, and all special services requested at both shipment and package level.

Also the following restrictions apply when using UPS Mail Innovations:

For USPS, this is used for getting rates and Endicia labels. For international shipments, the only valid values are: ptRectangular and ptNonRectangular.

For Canada Post, ptLetter (2) is only applicable if theContractId is set.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageSignatureType Property (FedExFreightRates Control)

Specifies one of the Delivery Signature Options requested for this package.

Syntax

fedexfreightratescontrol.PackageSignatureType(PackageIdx)[=integer]

Possible Values

stServiceDefault(0), 
stAdult(1), 
stDirect(2), 
stIndirect(3), 
stNoSignatureRequired(4), 
stUSPSDeliveryConfirmation(5), 
stAdult19(6)

Default Value

0

Remarks

Specifies one of the Delivery Signature Options requested for this package. Possible values are:

For FedEx Express shipments, the NoSignatureRequired option will not be allowed when the following special services are requested: Alcohol, Hold At Location or Dangerous Goods.

For residential FedEx Ground International shipments from Canada to the U.S., two valid signature options are allowed: NoSignatureRequired and Direct.

The impact of signature options fees may vary depending on your agreement with FedEx. Following are the definitions for FedEx:

• Service Default: In this case, the appropriate signature option will be selected for your shipping service. For example, if the package contains Dangerous Goods, the Direct signature option is chosen for you. The actual signature option applied to this package could be different than the signature option requested if a conflict occurred with other service features in the package. In this case, the value set in the request will be ignored.
• Indirect Signature Required: Indicates that an indirect signature is required upon delivery. This is allowed to residential addresses only. In this case, FedEx obtains a signature in one of three ways: from any person at the delivery address, from a neighbor, building manager, or other person at a neighboring address. The recipient can sign a FedEx door tag authorizing release of the package without anyone present. This might affect the shipping rates and/or service availability.
• Direct Signature Required: Indicates that a direct signature is required upon delivery. In this case, FedEx obtains a signature from any person at the delivery address. If no one is at the address, FedEx will reattempt delivery; Direct Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This option is not available for Hold at FedEx Location shipments. This might affect the shipping rates and/or service availability.
• Adult Signature Required: Indicates that the adult signature is required upon delivery. In this case, FedEx obtains a signature from any person at least 21 years old (government-issued photo identification required) at the delivery address. If no one is at the address, FedEx will reattempt delivery. Adult Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This might affect the shipping rates and/or service availability.

Note: In the server reply, this option may differ from that requested value due to other characteristics of the shipment.

For UPS, when delivery confirmation is requested for a package, the PackageSignatureType should be set to a value other than 0 (stServiceDefault). The availability of this special service depends on the ServiceType. The type stIndirect is not valid for UPS packages.

Also, when using UPS Mail Innovations, delivery confirmation can be requested by setting this to stUSPSDeliveryConfirmation.

Delivery Confirmation and COD cannot coexist on a single package. Also, Delivery Confirmation option cannot be combined with the Return Services option.

For USPS, if this is not set to stServiceDefault or stNoSignatureRequired, the Signature Confirmation service will be used. Also, for Express label shipments, set this to stNoSignatureRequired to waive the signature requirements.

This does not apply for Canada Post.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageSpecialServices Property (FedExFreightRates Control)

Contains the collection of special services offered on the package level.

Syntax

fedexfreightratescontrol.PackageSpecialServices(PackageIdx)[=long64]

Default Value

0

Remarks

Contains the collection of special services offered on the package level. Valid values are:

For FedEx, to request any of the special services offered for a particular package in a ship request, you must set the PackageSpecialServices of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below for FedEx:

• Appointment Delivery: Indicates that the appointment delivery special service is requested for this package. This might affect the shipping rates and/or service availability.
• Dangerous Goods: Indicates that this package contains dangerous goods. When the PackageSpecialServices contains this flag, then the PackageDangerousGoodsAccessible is required to be provided in the request as well. For FedEx Express services, these types of shipments are referred to as dangerous goods shipments. For FedEx Ground services, these types of shipments are referred to as hazardous materials (Hazmat) shipments. Hazmat shipments must be single package. FedEx Ground provides reliable delivery of hazardous materials in all U.S. states except Alaska and Hawaii. If you have not shipped hazardous materials with FedEx Ground before, contact your FedEx account executive first. FedEx needs to confirm that you have met government training requirements and can generate the documentation your shipments need. Additional information regarding hazardous materials shipping is provided at fedex.com/ us/services/options under the Hazardous Materials link. The Shipper's Hazardous Materials Certification report (OP-950), prints after a successful Ground close request. Please note that Hazmat shipments must be single package. If you create a multiple package (MPS) hazmat shipment, only one commodity prints on the OP-950. FedEx assesses a surcharge on each package containing dangerous goods/Hazmat materials. This might affect service availability as well.
• Dry Ice: Indicates that this package contains dry ice. FedEx assesses a surcharge on each package containing dry ice. This might affect service availability as well.
• Priority Alert: Indicates whether the priority alert special service is requested for this package. This is applicable to domestic shipments only. A per package surcharge is associated with Priority Alert. This is applicable for FedEx First Overnight and FedEx Priority Overnight. It can be associated with: Saturday Delivery, Hold Saturday, Hold at Location, Dangerous Goods, Dry Ice or Signature Service Option. Please note that Priority Alert requires a service contract. If you are interested in signing up for Priority Alert, contact your FedEx account executive.
• Non Standard Container: Indicates whether this package type is a non standard container. This might affect the shipping rates and/or service availability.
• COD: Indicates that this is a COD package. This service will affect shipping rates and service availability. This is applicable for domestic FedEx Express and Ground services, except FedEx Home Delivery premium. When shipping COD via FedEx Ground, the PackageCODAmount and PackageCODType must also be provided in the request.

For UPS, to request any of the special services offered for a particular package in a rate or ship request, you must set the PackageSpecialServices of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below:

• Additional Handling: Indicates that additional handling special service is requested for this package. This might affect the shipping rates and/or service availability.
• Non Standard Container: Indicates whether this package type is to be considered a large package (a non standard container). Dimensions must be 130 to 165 inches: Length + (2 x Width) + (2 x Height). This might affect the shipping rates and/or service availability.

Some other special services on package level, such as COD, Delivery Confirmation, Insured Value, are already implemented respectively through the PackageCODAmount and PackageCODType, PackageSignatureType, and PackageInsuredValue.

This property is not applicable to USPS or Canada Post.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Long64

PackageWeight Property (FedExFreightRates Control)

Weight of this package.

Syntax

fedexfreightratescontrol.PackageWeight(PackageIdx)[=string]

Default Value

"0.0"

Remarks

Weight of this package.

For FedEx, this is required to be provided in the request. It requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

For UPS, this is required to be provided in the request for each package contained in the shipment if PackagePackagingType is set to a value other than 0 (UPS Letter). For Ground shipments, if the actual weight is less than 150 pounds, then the billable weight is 150 pounds. Air and 3 Day Select shipments will not be subject to a minimum billable weight. Format: it requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

Note that if the ServiceType stUPSSurePostLessThan1LB or stUPSFirstClassMail is used, or the ServiceType stUPSExpeditedMailInovations is used with the PackagePackagingType ptMachineables, ptIrregulars, or ptStandardFlat then the weight must be specified in ounces. The WeightUnit config will be set automatically to "OZS" if not set.

For USPS, this must be the weight in pounds and ounces of the package. Package weight cannot exceed 70 pounds. (First-Class Mail cannot exceed 13 ounces. Bound Printed Matter cannot exceed 15 pounds). On international shipments, weight limits vary by country.

The format must be in "N lbs N oz", or as an integer showing the number of ounces. For example, a package with weight 6 lbs, 8 oz can be specified as "6 lbs 8 oz" or as "104".

However, in USPS, if PostageProvider is set to ppEndicia, then the format must be one explicit decimal position in ounces (i.e. N.N formatting).

For Canada Post, the weight of the parcel should be specified in kilograms (e.g. 99.999).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageWidth Property (FedExFreightRates Control)

The width of the package to be shipped.

Syntax

fedexfreightratescontrol.PackageWidth(PackageIdx)[=integer]

Default Value

0

Remarks

The width of the package to be shipped.

For FedEx, the PackageWidth is optional, but recommended, if "Your Packaging" is used as PackagePackagingType. This is required if PackageLength and PackageHeight are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When PackageWidth is provided in the request, then all other dimensions (PackageLength and PackageHeight) are to be set as well.

For USPS, this is only required if the package is irregular and the PackagePackagingType property is set to ptNonRectangular. (In this case PackageWidth and PackageHeight must still be set).

Note: For parcels, PackageLength is the measurement of the longest dimension and PackageWidth and PackageHeight make up the other two dimensions. PackageGirth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the PackageLength, PackageWidth, and PackageHeight are required for Priority Mail packages when the PackageSize is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the second longest dimension (3.1 digits e.g. 999.9 pattern).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PayorAccountNumber Property (FedExFreightRates Control)

The account number of the party responsible for payment (shipping charges, or duties and taxes).

Syntax

fedexfreightratescontrol.PayorAccountNumber[=string]

Default Value

""

Remarks

The account number of the party responsible for payment (shipping charges, or duties and taxes).

This is required to be provided in the ship request, only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. Otherwise, it defaults to PayorAccountNumber.

Data Type

String

PayorAddress1 Property (FedExFreightRates Control)

Street name.

Syntax

fedexfreightratescontrol.PayorAddress1[=string]

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. Combination of PayorAddress1 and PayorAddress2 should not exceed 35 characters.

Data Type

String

PayorAddress2 Property (FedExFreightRates Control)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

fedexfreightratescontrol.PayorAddress2[=string]

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. Combination of PayorAddress1 and PayorAddress2 should not exceed 35 characters.

Data Type

String

PayorCity Property (FedExFreightRates Control)

Name of city, town, etc.

Syntax

fedexfreightratescontrol.PayorCity[=string]

Default Value

""

Remarks

Name of city, town, etc.

Data Type

String

PayorCountryCode Property (FedExFreightRates Control)

The country code for the payor of the shipment, or duties and taxes.

Syntax

fedexfreightratescontrol.PayorCountryCode[=string]

Default Value

"US"

Remarks

The country code for the payor of the shipment, or duties and taxes.

When shipping via FedEx Express, the PayorCountryCode is required to be provided in the ship request only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. For FedEx Ground shipments, the PayorCountryCode is required only if PayorType is set to 'THIRDPARTY'.

For UPS, this should be the same as it was entered in the UPS system when this account was set up. In domestic shipments, it will always default to US.

Data Type

String

PayorName Property (FedExFreightRates Control)

Identifies the payor's name.

Syntax

fedexfreightratescontrol.PayorName[=string]

Default Value

""

Remarks

Identifies the payor's name.

PayorName is required only if PayorType is set to 'THIRDPARTY'.

Note: This property is only applicable to UPSFreightRates and UPSFreightShip.

Data Type

String

PayorType Property (FedExFreightRates Control)

Method of payment for shipment, or duties and taxes.

Syntax

fedexfreightratescontrol.PayorType[=integer]

Possible Values

ptSender(0), 
ptRecipient(1), 
ptThirdParty(2), 
ptCollect(3), 
ptConsignee(4)

Default Value

0

Remarks

Method of payment for shipment, or duties and taxes. This is required to be provided in a ship request. Valid payment types are:

The COLLECT payment type is only supported in FedEx Ground services. The CONSIGNEE type is only supported in UPS service.

For FedEx, when this property is set to a value other than 0 (ptSender), the PayorAccountNumber and PayorCountryCode are required to be provided in the request as well. Otherwise, those will default to FedExAccountNumber and SenderCountryCode.

For UPS, when set to ptSender, the PayorAccountNumber is automatically set to UPSAccountNumber. When ptRecipient is specified, PayorAccountNumber and PayorZipCode are required to be provided in the request. For return international shipments, this option is invalid for transportation charges. And, when ptThirdParty has been specified, the PayorAccountNumber, PayorZipCode and PayorCountryCode are required to be provided in the request. When ptConsignee is specified, it indicates that UPS Consignee Billing option is selected, no other fields need to be set. ptConsignee only applies to US/PR and PR/US shipment origins and destination.

Data Type

Integer

PayorState Property (FedExFreightRates Control)

State or province code.

Syntax

fedexfreightratescontrol.PayorState[=string]

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

PayorZipCode Property (FedExFreightRates Control)

Payor's postal code (if applicable).

Syntax

fedexfreightratescontrol.PayorZipCode[=string]

Default Value

""

Remarks

Payor's postal code (if applicable).

This is only applicable to UPS and is the corresponding postal code of the UPS PayorAccountNumber's pickup address. This should be the same as it was entered in the UPS system when this account was set up.

It can be provided in a ship request only if the PayorType is set to 1 (RECIPIENT) or 2 (THIRDPARTY).

Maximum length: 10.

Data Type

String

PickupType Property (FedExFreightRates Control)

Pickup type used for the shipment that rate is requested for.

Syntax

fedexfreightratescontrol.PickupType[=integer]

Possible Values

fptDropoffAtFedexLocation(0), 
fptContactFedexToSchedule(1), 
fptUseScheduledPickup(2), 
fptOnCall(3), 
fptPackageReturnProgram(4), 
fptRegularStop(5), 
fptTag(6), 
fptNone(7)

Default Value

0

Remarks

Indicate the pickup type method by which the shipment to be tendered to FedEx.

Valid values are:

Data Type

Integer

ProxyAuthScheme Property (FedExFreightRates Control)

This property is used to tell the control which type of authorization to perform when connecting to the proxy.

Syntax

fedexfreightratescontrol.ProxyAuthScheme[=integer]

Possible Values

authBasic(0), 
authDigest(1), 
authProprietary(2), 
authNone(3), 
authNtlm(4), 
authNegotiate(5)

Default Value

0

Remarks

This property is used to tell the control which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (FedExFreightRates Control)

This property tells the control whether or not to automatically detect and use proxy system settings, if available.

Syntax

fedexfreightratescontrol.ProxyAutoDetect[=boolean]

Default Value

False

Remarks

This property tells the control whether or not to automatically detect and use proxy system settings, if available. The default value is .

Data Type

Boolean

ProxyPassword Property (FedExFreightRates Control)

This property contains a password if authentication is to be used for the proxy.

Syntax

fedexfreightratescontrol.ProxyPassword[=string]

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (FedExFreightRates Control)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

fedexfreightratescontrol.ProxyPort[=integer]

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (FedExFreightRates Control)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

fedexfreightratescontrol.ProxyServer[=string]

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (FedExFreightRates Control)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

fedexfreightratescontrol.ProxySSL[=integer]

Possible Values

psAutomatic(0), 
psAlways(1), 
psNever(2), 
psTunnel(3)

Default Value

0

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (FedExFreightRates Control)

This property contains a username if authentication is to be used for the proxy.

Syntax

fedexfreightratescontrol.ProxyUser[=string]

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

RateType Property (FedExFreightRates Control)

Indicates the type of rates to be returned.

Syntax

fedexfreightratescontrol.RateType[=integer]

Default Value

1

Remarks

Possible values are listed below (specified in hexadecimal notation). They can be or-ed together to include multiple options:

Data Type

Integer

RecipientAddress1 Property (FedExFreightRates Control)

Street name.

Syntax

fedexfreightratescontrol.RecipientAddress1[=string]

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS RecipientAddress1 should not exceed 35 characters.

Data Type

String

RecipientAddress2 Property (FedExFreightRates Control)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

fedexfreightratescontrol.RecipientAddress2[=string]

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS RecipientAddress2 should not exceed 35 characters.

Data Type

String

RecipientAddressFlags Property (FedExFreightRates Control)

Various flags that denote information about the address.

Syntax

fedexfreightratescontrol.RecipientAddressFlags[=integer]

Default Value

0

Remarks

Various flags that denote information about the address.

Data Type

Integer

RecipientCity Property (FedExFreightRates Control)

Name of city, town, etc.

Syntax

fedexfreightratescontrol.RecipientCity[=string]

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

RecipientCountryCode Property (FedExFreightRates Control)

Country code.

Syntax

fedexfreightratescontrol.RecipientCountryCode[=string]

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

RecipientState Property (FedExFreightRates Control)

State or province code.

Syntax

fedexfreightratescontrol.RecipientState[=string]

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

RecipientZipCode Property (FedExFreightRates Control)

Postal code.

Syntax

fedexfreightratescontrol.RecipientZipCode[=string]

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both RecipientCity and RecipientState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

RequestedService Property (FedExFreightRates Control)

Service type for which the shipping rate is requested.

Syntax

fedexfreightratescontrol.RequestedService[=integer]

Possible Values

stUnspecified(0), 
stFedExPriorityOvernight(10), 
stFedExStandardOvernight(11), 
stFedExFirstOvernight(12), 
stFedEx2Day(13), 
stFedExExpressSaver(14), 
stFedExGround(15), 
stFedExGroundHomeDelivery(16), 
stFedEx1DayFreight(17), 
stFedEx2DayFreight(18), 
stFedEx3DayFreight(19), 
stFedExInternationalPriority(20), 
stFedExInternationalEconomy(21), 
stFedExInternationalFirst(22), 
stFedExInternationalPriorityFreight(23), 
stFedExInternationalEconomyFreight(24), 
stFedExEuropeFirstInternationalPriority(25), 
stFedExSmartPost(26), 
stFedEx2DayAM(27), 
stFedExFirstFreight(28), 
stFedExInternationalGround(29), 
stFedExFreightEconomy(30), 
stFedExFreightPriority(31), 
stFedExInternationalPriorityExpress(32), 
stFedExInternationalConnectPlus(33), 
stUPSFirstClass(35), 
stUPSPriorityMail(36), 
stUPSExpeditedMailInnovations(37), 
stUPSPriorityMailInnovations(38), 
stUPSEconomyMailInnovations(39), 
stUPSNextDayAir(40), 
stUPSExpress(41), 
stUPS2ndDayAir(42), 
stUPSGround(43), 
stUPSWorldwideExpress(44), 
stUPSWorldwideExpedited(45), 
stUPSExpedited(46), 
stUPSStandard(47), 
stUPS3DaySelect(48), 
stUPSNextDayAirSaver(49), 
stUPSSaver(50), 
stUPSNextDayAirEarlyAM(51), 
stUPSExpressEarlyAM(52), 
stUPSWorldwideExpressPlus(53), 
stUPSExpressPlus(54), 
stUPS2ndDayAirAM(55), 
stUPSTodayStandard(56), 
stUPSTodayCourrier(57), 
stUPSTodayInterCity(58), 
stUPSTodayExpress(59), 
stUPSTodayExpressSaver(60), 
stUPSWorldwideExpressFreight(61), 
stUPSSurePostLessThan1LB(62), 
stUPSSurePost1LBOrGreater(63), 
stUPSSurePostBPM(64), 
stUPSSurePostMedia(65), 
stUSPSExpress(70), 
stUSPSFirstClass(71), 
stUSPSPriority(72), 
stUSPSParcelPost(73), 
stUSPSBPM(74), 
stUSPSMedia(75), 
stUSPSLibrary(76), 
stUSPSOnline(77), 
stUSPSGlobalExpress(78), 
stUSPSParcelSelect(79), 
stUSPSCriticalMail(80), 
stUSPSStandardMail(81), 
stUSPSExpressMailInternational(82), 
stUSPSFirstClassMailInternational(83), 
stUSPSPriorityMailInternational(84), 
stUSPSPriorityExpress(85), 
stUSPSRetailGround(86), 
stUSPSFirstClassPackageInternationalService(87), 
stUSPSPriorityMailExpressInternational(88), 
stCanadaRegularParcel(90), 
stCanadaExpeditedParcel(91), 
stCanadaXpresspost(92), 
stCanadaLibrary(93), 
stCanadaPriority(94), 
stCanadaPriorityEnvelopeUSA(95), 
stCanadaPriorityPakUSA(96), 
stCanadaPriorityParcelUSA(97), 
stCanadaXpresspostUSA(98), 
stCanadaExpeditedParcelUSA(99), 
stCanadaSmallPacketAirUSA(100), 
stCanadaTrackedPacketUSA(101), 
stCanadaTrackedPacketLVMUSA(102), 
stCanadaPriorityEnvelopeInternational(103), 
stCanadaPriorityPakInternational(104), 
stCanadaPriorityParcelInternational(105), 
stCanadaXpresspostInternational(106), 
stCanadaSmallPacketAirInternational(107), 
stCanadaSmallPacketLandInternational(108), 
stCanadaParcelAirInternational(109), 
stCanadaParcelLandInternational(110), 
stCanadaTrackedPacketInternational(111), 
stFedExSameDay(126), 
stFedExSameDayCity(127), 
stFedExSameDayMetroAfternoon(128), 
stFedExSameDayMetroMorning(129), 
stFedExSameDayMetroRush(130), 
stUPSWorldwideEconomyDDU(131), 
stUPSWorldwideEconomyDDP(132), 
stUSPSParcelSelectGround(133), 
stUSPSPriorityMailCubic(134), 
stUSPSGroundAdvantage(135), 
stUSPSGroundAdvantageCubic(136), 
stFedExFirst(140), 
stFedExPriority(141), 
stFedExPriorityExpress(142), 
stFedExPriorityExpressFreight(143), 
stFedExPriorityFreight(144), 
stFedExEconomySelect(145)

Default Value

0

Remarks

This property is required to be entered in the request only if the rate request is made for a specific FedEx service type. In this case, the RequestedService should be set to a value different from 'stUnspecified'.

Otherwise, the rate request will be considered by FedEx server as it has been made for all available services and respective rates.

Possible values are:

For all services, the following guidelines apply:

• Packages/skids must wight more than 150 lbs.
• Individual pallets/skids weighing in excess of 2200 lbs or larger than 70" in height, 119" in length, or 80" in width require prior approval by FedEx.
• Service days are Monday through Friday, with Saturday pickup and delivery available to many major markets.

Data Type

Integer

SenderAddress1 Property (FedExFreightRates Control)

Street name.

Syntax

fedexfreightratescontrol.SenderAddress1[=string]

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS SenderAddress1 should not exceed 35 characters.

Data Type

String

SenderAddress2 Property (FedExFreightRates Control)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

fedexfreightratescontrol.SenderAddress2[=string]

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS SenderAddress2 should not exceed 35 characters.

Data Type

String

SenderAddressFlags Property (FedExFreightRates Control)

Various flags that denote information about the address.

Syntax

fedexfreightratescontrol.SenderAddressFlags[=integer]

Default Value

0

Remarks

Various flags that denote information about the address.

Data Type

Integer

SenderCity Property (FedExFreightRates Control)

Name of city, town, etc.

Syntax

fedexfreightratescontrol.SenderCity[=string]

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

SenderCountryCode Property (FedExFreightRates Control)

Country code.

Syntax

fedexfreightratescontrol.SenderCountryCode[=string]

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

SenderState Property (FedExFreightRates Control)

State or province code.

Syntax

fedexfreightratescontrol.SenderState[=string]

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

SenderZipCode Property (FedExFreightRates Control)

Postal code.

Syntax

fedexfreightratescontrol.SenderZipCode[=string]

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both SenderCity and SenderState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

ServiceCount Property (FedExFreightRates Control)

The number of records in the Service arrays.

Syntax

fedexfreightratescontrol.ServiceCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• ServiceAccountBaseCharge
• ServiceAccountNetCharge
• ServiceAccountTotalDiscount
• ServiceAccountTotalSurcharge
• ServiceAggregate
• ServiceDeliveryDate
• ServiceDeliveryDay
• ServiceEffectiveNetDiscount
• ServiceListBaseCharge
• ServiceListNetCharge
• ServiceListTotalDiscount
• ServiceListTotalSurcharge
• ServiceRateScale
• ServiceRateZone
• ServiceSignatureType
• ServiceTransitTime
• ServiceType
• ServiceTypeDescription

The array indices start at 0 and end at ServiceCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ServiceAccountBaseCharge Property (FedExFreightRates Control)

Transportation charges before surcharges and discounts applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceAccountBaseCharge(ServiceIdx)

Default Value

""

Remarks

Transportation charges before surcharges and discounts applied to a ServiceType. This applies to FedEx only and is specific to the FedExAccountNumber. After calling the GetRates method, the ServiceAccountBaseCharge will be filled with the value of discounted base charge amount specific to the FedExAccountNumber (i.e. depending on the current rate schedule the FedExAccountNumber is receiving from FedEx).

For Canada Post, this field will contain the base cost of the shipment before taxes (numeric 99999.99).

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceAccountNetCharge Property (FedExFreightRates Control)

Net charge amount applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceAccountNetCharge(ServiceIdx)

Default Value

""

Remarks

Net charge amount applied to a ServiceType.

For FedEx, this is specific to the FedExAccountNumber. After calling the GetRates method, the ServiceAccountNetCharge will be filled with the value of discounted net charge amount specific to the FedExAccountNumber (i.e. depending on the current rate schedule the FedExAccountNumber is receiving from FedEx).

For UPS, this is the value of grand total charges for account based rating applied to a shipment when using the returned ServiceType

The UPS server response will contain negotiated rate(s) only for the qualified UPSAccountNumbers. If the user is authorized for negotiated rates, and if negotiated rates apply to the particular service, UPS returns those rates along with the published rates in its response. Otherwise, a warning message might be returned that indicates ineligibility and only the published rates are returned in the response. For more information on negotiated rates, including authorization to receive them, please check with your UPS account representative.

This property is not used by the USPS control.

For Canada Post, this field will contain the total cost of the shipment if sent using this service including the cost of selected or required options, surcharges, discounts and taxes.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceAccountTotalDiscount Property (FedExFreightRates Control)

Total discount amount applied to the shipment for a ServiceType .

Syntax

fedexfreightratescontrol.ServiceAccountTotalDiscount(ServiceIdx)

Default Value

""

Remarks

Total discount amount applied to the shipment for a ServiceType. This is for FedEx only and is specific to the FedExAccountNumber. After calling the GetRates method, the ServiceAccountTotalDiscount will be filled with the value of total discount applied, which is specific to the FedExAccountNumber (i.e. depending on the current rate schedule the FedExAccountNumber is receiving from FedEx).

For Canada Post, this field will contain the total amount of discounts.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceAccountTotalSurcharge Property (FedExFreightRates Control)

Total surcharge amount for all additional services applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceAccountTotalSurcharge(ServiceIdx)

Default Value

""

Remarks

Total surcharge amount for all additional services applied to a ServiceType. This is only for FedEx, and is specific to the FedExAccountNumber. After calling the GetRates method, the ServiceAccountTotalSurcharge will be filled with the value of total surcharges applied, which is specific to the FedExAccountNumber (i.e. depending on the current rate schedule the FedExAccountNumber is receiving from FedEx).

For Canada Post, this field will contain the total amount of surcharges.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceAggregate Property (FedExFreightRates Control)

Aggregate of details and rates for the ServiceType in the list of available services.

Syntax

fedexfreightratescontrol.ServiceAggregate(ServiceIdx)

Default Value

""

Remarks

Aggregate of details and rates for the ServiceType in the list of available services.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceDeliveryDate Property (FedExFreightRates Control)

This indicates the shipment delivery date for the ServiceType .

Syntax

fedexfreightratescontrol.ServiceDeliveryDate(ServiceIdx)

Default Value

""

Remarks

This indicates the shipment delivery date for the ServiceType.

In regards to International services, the delivery date availability is limited to some postal-code supported countries. The delivery date will be returned if available. Format: YYYY-MM-DD.

For UPS, this property is filled after a call to the GetShippingTime.

This is not applicable to USPS.

For Canada Post, this field will be populated after a GetRates call and will contain the estimated date of delivery, starting from the expected mailing-date.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceDeliveryDay Property (FedExFreightRates Control)

Indicates the day of the week the shipment can be delivered when using the ServiceType .

Syntax

fedexfreightratescontrol.ServiceDeliveryDay(ServiceIdx)

Default Value

""

Remarks

Indicates the day of the week the shipment can be delivered when using the ServiceType. Possible values are: SUN, MON, TUE, WED, THU, FRI, SAT. In regards to International services, the delivery date availability is limited to some postal-code supported countries and it will be returned if available.

For UPS, this property is filled after a call to the GetShippingTime.

This is not applicable to USPS.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceEffectiveNetDiscount Property (FedExFreightRates Control)

Indicates the net discount applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceEffectiveNetDiscount(ServiceIdx)

Default Value

""

Remarks

Indicates the net discount applied to a ServiceType. This is only valid for FedEx.

After calling the GetRates method, the ServiceEffectiveNetDiscount will be filled with the value of net discount applied. This is specific to the FedExAccountNumber (i.e. depending on the current rate schedule the FedExAccountNumber is receiving from FedEx). This is the difference between the list net charge and account net charge.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceListBaseCharge Property (FedExFreightRates Control)

Transportation charges before surcharges and discounts applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceListBaseCharge(ServiceIdx)

Default Value

""

Remarks

Transportation charges before surcharges and discounts applied to a ServiceType. After calling the GetRates method, the ServiceListBaseCharge will be filled with the value of base charge amount.

For FedEx, this is returned in the server response only if the RateType is set to 0 (rtList) in the request.

This does not apply to USPS.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceListNetCharge Property (FedExFreightRates Control)

Net charge amount applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceListNetCharge(ServiceIdx)

Default Value

""

Remarks

Net charge amount applied to a ServiceType.

After calling the GetRates method, the ServiceListNetCharge will be filled with the value of list net charge amount.

For FedEx, this is returned in the server response only if the RateType is set to 0 (rtList) in the request.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceListTotalDiscount Property (FedExFreightRates Control)

Total discount amount applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceListTotalDiscount(ServiceIdx)

Default Value

""

Remarks

Total discount amount applied to a ServiceType. This applies only to FedEx. After calling the GetRates method, the ServiceListTotalDiscount will be filled with the value of total discount applied. This is returned in the server response only if the RateType is set to 0 (rtList) in the request.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceListTotalSurcharge Property (FedExFreightRates Control)

Total surcharge amount for all additional services applied to a ServiceType .

Syntax

fedexfreightratescontrol.ServiceListTotalSurcharge(ServiceIdx)

Default Value

""

Remarks

Total surcharge amount for all additional services applied to a ServiceType.

After calling the GetRates method, the ServiceListTotalSurcharge will be filled with the value of total surcharges applied.

For FedEx, this is returned in the server response only if the RateType is set to 0 (rtList) in the request.

This value does not apply to USPS.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceRateScale Property (FedExFreightRates Control)

Applicable rate scale for the ServiceType .

Syntax

fedexfreightratescontrol.ServiceRateScale(ServiceIdx)

Default Value

""

Remarks

Applicable rate scale for the ServiceType.

The ServiceRateScale indicates the rate scale (this is specific to the FedExAccountNumber) used by FedEx to rate a shipment when shipped via the ServiceType. This is applicable for FedEx Express services only.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceRateZone Property (FedExFreightRates Control)

Applicable rate zone for the ServiceType .

Syntax

fedexfreightratescontrol.ServiceRateZone(ServiceIdx)

Default Value

""

Remarks

Applicable rate zone for the ServiceType.

The ServiceRateZone indicates the zone used by FedEx to rate a shipment (this is specific to the RecipientZipCode) when using a FedEx Express service. This is applicable for FedEx Express services only.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceType Property (FedExFreightRates Control)

Indicates the service type in the list of available services returned.

Syntax

fedexfreightratescontrol.ServiceType(ServiceIdx)

Possible Values

stUnspecified(0), 
stFedExPriorityOvernight(10), 
stFedExStandardOvernight(11), 
stFedExFirstOvernight(12), 
stFedEx2Day(13), 
stFedExExpressSaver(14), 
stFedExGround(15), 
stFedExGroundHomeDelivery(16), 
stFedEx1DayFreight(17), 
stFedEx2DayFreight(18), 
stFedEx3DayFreight(19), 
stFedExInternationalPriority(20), 
stFedExInternationalEconomy(21), 
stFedExInternationalFirst(22), 
stFedExInternationalPriorityFreight(23), 
stFedExInternationalEconomyFreight(24), 
stFedExEuropeFirstInternationalPriority(25), 
stFedExSmartPost(26), 
stFedEx2DayAM(27), 
stFedExFirstFreight(28), 
stFedExInternationalGround(29), 
stFedExFreightEconomy(30), 
stFedExFreightPriority(31), 
stFedExInternationalPriorityExpress(32), 
stFedExInternationalConnectPlus(33), 
stUPSFirstClass(35), 
stUPSPriorityMail(36), 
stUPSExpeditedMailInnovations(37), 
stUPSPriorityMailInnovations(38), 
stUPSEconomyMailInnovations(39), 
stUPSNextDayAir(40), 
stUPSExpress(41), 
stUPS2ndDayAir(42), 
stUPSGround(43), 
stUPSWorldwideExpress(44), 
stUPSWorldwideExpedited(45), 
stUPSExpedited(46), 
stUPSStandard(47), 
stUPS3DaySelect(48), 
stUPSNextDayAirSaver(49), 
stUPSSaver(50), 
stUPSNextDayAirEarlyAM(51), 
stUPSExpressEarlyAM(52), 
stUPSWorldwideExpressPlus(53), 
stUPSExpressPlus(54), 
stUPS2ndDayAirAM(55), 
stUPSTodayStandard(56), 
stUPSTodayCourrier(57), 
stUPSTodayInterCity(58), 
stUPSTodayExpress(59), 
stUPSTodayExpressSaver(60), 
stUPSWorldwideExpressFreight(61), 
stUPSSurePostLessThan1LB(62), 
stUPSSurePost1LBOrGreater(63), 
stUPSSurePostBPM(64), 
stUPSSurePostMedia(65), 
stUSPSExpress(70), 
stUSPSFirstClass(71), 
stUSPSPriority(72), 
stUSPSParcelPost(73), 
stUSPSBPM(74), 
stUSPSMedia(75), 
stUSPSLibrary(76), 
stUSPSOnline(77), 
stUSPSGlobalExpress(78), 
stUSPSParcelSelect(79), 
stUSPSCriticalMail(80), 
stUSPSStandardMail(81), 
stUSPSExpressMailInternational(82), 
stUSPSFirstClassMailInternational(83), 
stUSPSPriorityMailInternational(84), 
stUSPSPriorityExpress(85), 
stUSPSRetailGround(86), 
stUSPSFirstClassPackageInternationalService(87), 
stUSPSPriorityMailExpressInternational(88), 
stCanadaRegularParcel(90), 
stCanadaExpeditedParcel(91), 
stCanadaXpresspost(92), 
stCanadaLibrary(93), 
stCanadaPriority(94), 
stCanadaPriorityEnvelopeUSA(95), 
stCanadaPriorityPakUSA(96), 
stCanadaPriorityParcelUSA(97), 
stCanadaXpresspostUSA(98), 
stCanadaExpeditedParcelUSA(99), 
stCanadaSmallPacketAirUSA(100), 
stCanadaTrackedPacketUSA(101), 
stCanadaTrackedPacketLVMUSA(102), 
stCanadaPriorityEnvelopeInternational(103), 
stCanadaPriorityPakInternational(104), 
stCanadaPriorityParcelInternational(105), 
stCanadaXpresspostInternational(106), 
stCanadaSmallPacketAirInternational(107), 
stCanadaSmallPacketLandInternational(108), 
stCanadaParcelAirInternational(109), 
stCanadaParcelLandInternational(110), 
stCanadaTrackedPacketInternational(111), 
stFedExSameDay(126), 
stFedExSameDayCity(127), 
stFedExSameDayMetroAfternoon(128), 
stFedExSameDayMetroMorning(129), 
stFedExSameDayMetroRush(130), 
stUPSWorldwideEconomyDDU(131), 
stUPSWorldwideEconomyDDP(132), 
stUSPSParcelSelectGround(133), 
stUSPSPriorityMailCubic(134), 
stUSPSGroundAdvantage(135), 
stUSPSGroundAdvantageCubic(136), 
stFedExFirst(140), 
stFedExPriority(141), 
stFedExPriorityExpress(142), 
stFedExPriorityExpressFreight(143), 
stFedExPriorityFreight(144), 
stFedExEconomySelect(145)

Default Value

0

Remarks

Indicates the service type in the list of available services returned.

This is populated when the GetShippingTime or GetRates methods are called.

Valid values for FedEx are:

Valid values for UPS are:

Note: stUPSSaver (50) is a valid option for US domestic shipment, but only when sending to remote parts of Alaska or Hawaii Note: stUPSFirstClass (35), stUPSPriorityMail (36), stUPSExpeditedMailInnovations (37), stUPSPriorityMailInnovations (38), and stUPSEconomyMailInnovations (39) will not return any rates.

Valid values for USPS are:

Please note that the RequestedService stUSPSBPM (74) is no longer supported by Endicia.

Valid values for Canada Post are:

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

Integer

ServiceTypeDescription Property (FedExFreightRates Control)

Indicates the textual description of a service type in the list of available services returned.

Syntax

fedexfreightratescontrol.ServiceTypeDescription(ServiceIdx)

Default Value

""

Remarks

Indicates the textual description of a service type in the list of available services returned.

Possible returned values for FedEx are:

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceSignatureType Property (FedExFreightRates Control)

Indicates the textual description of the delivery signature services option required by FedEx for the ServiceType .

Syntax

fedexfreightratescontrol.ServiceSignatureType(ServiceIdx)

Default Value

""

Remarks

Indicates the textual description of the delivery signature services option required by FedEx for the ServiceType. This might be different from the requested PackageSignatureType.

Possible returned values are:

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ServiceTransitTime Property (FedExFreightRates Control)

Expected number of days in transit from pickup to delivery for the ServiceType .

Syntax

fedexfreightratescontrol.ServiceTransitTime(ServiceIdx)

Default Value

""

Remarks

Expected number of days in transit from pickup to delivery for the ServiceType. This is an estimate only and depends on the customs clearance times. It is optional to be returned in the server reply.

The ServiceIdx parameter specifies the index of the item in the array. The size of the array is controlled by the ServiceCount property.

This property is read-only and not available at design time.

Data Type

String

ShipDate Property (FedExFreightRates Control)

The date on which the package will be shipped.

Syntax

fedexfreightratescontrol.ShipDate[=string]

Default Value

""

Remarks

This property value is optional to be entered in the request. This might affect the service availability.

The date should be the current date, or a date no more than 10 days in the future.

Defaults to current system date if not present.

Supported date formats are "yyyy-MM-dd" and "yyyy-MM-ddTHH:mm:ss".

Data Type

String

ShipmentInfoAccountNumber Property (FedExFreightRates Control)

This is the account number to be used with a freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoAccountNumber[=string]

Default Value

""

Remarks

This is the account number to be used with a freight shipment. This is required when submitting a freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingAccountNumber Property (FedExFreightRates Control)

This should be set to the alternate account number to be billed.

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingAccountNumber[=string]

Default Value

""

Remarks

This should be set to the alternate account number to be billed. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingCity Property (FedExFreightRates Control)

This should be set to the city associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingCity[=string]

Default Value

""

Remarks

This should be set to the city associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingCompanyName Property (FedExFreightRates Control)

This should be set to the name of the company associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingCompanyName[=string]

Default Value

""

Remarks

This should be set to the name of the company associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingCountryCode Property (FedExFreightRates Control)

This should be set to the country code associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingCountryCode[=string]

Default Value

""

Remarks

This should be set to the country code associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingPersonName Property (FedExFreightRates Control)

This should be set to the name of the person associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingPersonName[=string]

Default Value

""

Remarks

This should be set to the name of the person associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingPhone Property (FedExFreightRates Control)

This should be set to the phone associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingPhone[=string]

Default Value

""

Remarks

This should be set to the phone associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingState Property (FedExFreightRates Control)

This should be set to the state associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingState[=string]

Default Value

""

Remarks

This should be set to the state associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingStreetAddress Property (FedExFreightRates Control)

This should be set to the street address associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingStreetAddress[=string]

Default Value

""

Remarks

This should be set to the street address associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingZipCode Property (FedExFreightRates Control)

This should be set to the zip code associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoAlternateBillingZipCode[=string]

Default Value

""

Remarks

This should be set to the zip code associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingAddress1 Property (FedExFreightRates Control)

This should be set to the first address line listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingAddress1[=string]

Default Value

""

Remarks

This should be set to the first address line listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingAddress2 Property (FedExFreightRates Control)

This should be set to the second address line listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingAddress2[=string]

Default Value

""

Remarks

This should be set to the second address line listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingCity Property (FedExFreightRates Control)

This should be set to the city listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingCity[=string]

Default Value

""

Remarks

This should be set to the city listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingCompanyName Property (FedExFreightRates Control)

This should be set to the name of the company listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingCompanyName[=string]

Default Value

""

Remarks

This should be set to the name of the company listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingCountryCode Property (FedExFreightRates Control)

This should be set to the country code listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingCountryCode[=string]

Default Value

""

Remarks

This should be set to the country code listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingEmail Property (FedExFreightRates Control)

This should be set to the email address listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingEmail[=string]

Default Value

""

Remarks

This should be set to the email address listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingFax Property (FedExFreightRates Control)

This should be set to the fax number listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingFax[=string]

Default Value

""

Remarks

This should be set to the fax number listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingPersonName Property (FedExFreightRates Control)

This should be set to the name of the person listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingPersonName[=string]

Default Value

""

Remarks

This should be set to the name of the person listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingPhone Property (FedExFreightRates Control)

This should be set to the phone number listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingPhone[=string]

Default Value

""

Remarks

This should be set to the phone number listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingState Property (FedExFreightRates Control)

This should be set to the state listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingState[=string]

Default Value

""

Remarks

This should be set to the state listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingZipCode Property (FedExFreightRates Control)

This should be set to the zip code listed on the account associated with the FreightAccountNumber .

Syntax

fedexfreightratescontrol.ShipmentInfoBillingZipCode[=string]

Default Value

""

Remarks

This should be set to the zip code listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoClientDiscountPercent Property (FedExFreightRates Control)

The estimated client discount rate for a freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoClientDiscountPercent[=string]

Default Value

""

Remarks

The estimated client discount rate for a freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoCollectTermsType Property (FedExFreightRates Control)

This sets the terms for how to collect payment for this freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoCollectTermsType[=integer]

Possible Values

fctStandard(0), 
fctNonRecourseShipperSigned(1)

Default Value

0

Remarks

This sets the terms for how to collect payment for this freight shipment. Default value is 0.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoComments Property (FedExFreightRates Control)

The description for this freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoComments[=string]

Default Value

""

Remarks

The description for this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoCoupons Property (FedExFreightRates Control)

This contains a semicolon delimited list of identifiers for promotional discounts offered to customers.

Syntax

fedexfreightratescontrol.ShipmentInfoCoupons[=string]

Default Value

""

Remarks

This contains a semicolon delimited list of identifiers for promotional discounts offered to customers. For example: coupon1; coupon2; coupon3.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoDeclaredValue Property (FedExFreightRates Control)

The total declared value per unit for this freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoDeclaredValue[=string]

Default Value

""

Remarks

The total declared value per unit for this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoDeclaredValueUnits Property (FedExFreightRates Control)

Identifies the declared value units corresponding to the above defined declared value.

Syntax

fedexfreightratescontrol.ShipmentInfoDeclaredValueUnits[=string]

Default Value

""

Remarks

Identifies the declared value units corresponding to the above defined declared value.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoEmergencyContactPhone Property (FedExFreightRates Control)

The phone number for the emergency contact.

Syntax

fedexfreightratescontrol.ShipmentInfoEmergencyContactPhone[=string]

Default Value

""

Remarks

The phone number for the emergency contact. This is required if any of the Commodities line items contain hazardous materials.

Data Type

String

ShipmentInfoHazardousMaterialsOfferor Property (FedExFreightRates Control)

If this shipment contains hazardous materials, this should contain the offeror of the hazardous materials.

Syntax

fedexfreightratescontrol.ShipmentInfoHazardousMaterialsOfferor[=string]

Default Value

""

Remarks

If this shipment contains hazardous materials, this should contain the offeror of the hazardous materials.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoLiabilityCoverageAmount Property (FedExFreightRates Control)

This should be set to the total value of the liability coverage.

Syntax

fedexfreightratescontrol.ShipmentInfoLiabilityCoverageAmount[=string]

Default Value

""

Remarks

This should be set to the total value of the liability coverage.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoLiabilityCoverageType Property (FedExFreightRates Control)

This should be set to the type of liability coverage offered.

Syntax

fedexfreightratescontrol.ShipmentInfoLiabilityCoverageType[=integer]

Possible Values

lctNew(0), 
lctUsedOrReconditioned(1)

Default Value

0

Remarks

This should be set to the type of liability coverage offered.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoPalletWeight Property (FedExFreightRates Control)

This should contain the total weight of all pallets used in this freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoPalletWeight[=string]

Default Value

""

Remarks

This should contain the total weight of all pallets used in this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoRole Property (FedExFreightRates Control)

This indicates the role of the party is submitting the transaction for this freight shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoRole[=integer]

Possible Values

fsrShipper(0), 
fsrConsignee(1)

Default Value

0

Remarks

This indicates the role of the party is submitting the transaction for this freight shipment.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalHandlingUnits Property (FedExFreightRates Control)

Total number of individual handling units in the entire shipment (for unit pricing).

Syntax

fedexfreightratescontrol.ShipmentInfoTotalHandlingUnits[=integer]

Default Value

1

Remarks

Total number of individual handling units in the entire shipment (for unit pricing).

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalHeight Property (FedExFreightRates Control)

This should be set to the total height of the shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoTotalHeight[=integer]

Default Value

0

Remarks

This should be set to the total height of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalLength Property (FedExFreightRates Control)

This should be set to the total length of the shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoTotalLength[=integer]

Default Value

0

Remarks

This should be set to the total length of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalWidth Property (FedExFreightRates Control)

This should be set to the total width of the shipment.

Syntax

fedexfreightratescontrol.ShipmentInfoTotalWidth[=integer]

Default Value

0

Remarks

This should be set to the total width of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentSpecialServices Property (FedExFreightRates Control)

Contains the collection of special services offered by FedEx.

Syntax

fedexfreightratescontrol.ShipmentSpecialServices[=long64]

Default Value

0

Remarks

To request any of the special services offered by FedEx, you must set the ShipmentSpecialServices to a set of flags as listed below, the following flags can be or-ed together in order to select multiple options:

The meaning and limitations for each special service option are listed below:

• Broker Select: Indicates that the broker select special service is requested. When shipping internationally, the customer might want to have their own broker to deal with the delivery (for customs purposes). To request such service, the BrokerSelect option should be set in the ShipmentSpecialServices value. This allows you to designate a specific customs broker other than FedEx (or a FedEx designated broker). This is applicable to the following international FedEx services:
  • stFedExInternationalPriority (20)
  • stFedExInternationalEconomy (21)
  • stFedExInternationalPriorityFreight (23)
  • stFedExInternationalEconomyFreight (24)
  • stFedExInternationalPriorityExpress (32)
  • stFedExInternationalConnectPlus (33)
  FedEx International Broker Select is a contract service. Before you begin using FedEx International Broker Select (BSO), you must contact your FedEx account executive to be enrolled for this service. An additional routing surcharge applies to your BSO shipments if you choose to have FedEx complete delivery after customs clearance and if your recipient and customs broker are served by different FedEx clearance points. This service is not valid with SaturdayPickup/SaturdayDelivery services. When this service is requested, then the ClearanceBrokerageType, BrokerType, BrokerContact, and BrokerAddress are required to be provided in the ship request as well.

  Note: Certain customs limitations may apply for BSO shipments. Contact FedEx Express International customer service at 1.800.247.4747 for requirements. Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.

• COD: Indicates that this is a COD shipment. This service will affect shipping rates and service availability. When set, the CODTotalAmount and CODType properties must be set. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Dangerous Goods: Indicates that the shipment contains dangerous goods. This service will affect shipping rates and service availability. When set, at least one CommodityHazardousMaterialsOptions must be selected and the ShipmentInfoEmergencyContactPhone must be set Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.
• Do Not Break Down Pallets: Indicates that the pallets should not be broken down. Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.
• Do Not Stack Pallets: Indicates that the pallets should not be stacked. Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.
• Dry Ice: Indicates that the shipment contains dry ice. This might affect the shipping rates and service availability. When this service is requested the DryIceCount and PackageDryIceWeight are required to be specified in the request (shipment level). Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.
• Electronic Trade Documents: This only applies when shipping internationally. FedEx will generate and submit your trade documents specified in the ShippingDocumentTypes electronically and you no longer need to print and attach them. Note that some countries do not accept Electronic Trade Documents (ETD). For a full list of countries that support ETD you can go to http://images.fedex.com/international/pdf/FedExElectronicTradeDocuments_Coverage.pdf.

  If you also want to receive copies of the FedEx generated documents use the RequestedETDDocuments property together with the ShippingDocumentFile config to specify the files you are requesting and the location where to save them. Note: This is only valid for FedEx International Economy Freight and FedEx International Priority Freight.

• Event Notification: Indicates that event notification is requested. This might affect the service availability. If this is requested in a ship request, then the Notify collection is required to be set. Note that this is only valid for FedEx First Overnight Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Extreme Length: This indicates that the pallet is longer than typically allowed. This requires prior clearance with FedEx.
• Food: This indicates that the shipment contains food items. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Freight Guarantee: This indicates that the freight shipment is guaranteed for a specific date and time. When set, the FreightGuarantee property should be set. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Hold At Location: Indicates that the FedEx shipment is to be held at the destination FedEx location for pickup by the recipient. The request of this special service might affect the shipping rates and/or service availability. This service is not valid with the Hold Saturday service, or when RecipientAddressFlags is set to Residential (i.e., for residential delivery). When this service is requested HoldAtLocation is required to be provided in the request as well. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx International Economy Freight, and FedEx International Priority Freight.
• Inside Delivery: Indicates that inside delivery service is requested. In this case, FedEx may move shipments to positions beyond the adjacent loading area. In doing so, FedEx will assess an inside delivery charge in addition to all other applicable charges. The adjacent loading area is defined as a delivery site that is directly accessible from the curb and is no more than 50 feet inside the outermost door. FedEx will assess an inside delivery charge when shipment breakdown is necessary to fit a shipment through a doorway. FedEx does not provide piece count or piece verification when a breakdown of a freight shipment occurs at the delivery site. Contact FedEx for current surcharge rates. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx First Overnight Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Inside Pickup: Indicates that inside pickup service is requested. In this case, FedEx may move shipments from positions beyond the adjacent loading area. In doing so, FedEx will assess an inside pickup charge in addition to all other applicable charges. The adjacent loading area is defined as a pickup site that is directly accessible from the curb and is no more than 50 feet inside the outermost door. Contact FedEx for current surcharge rates. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx First Overnight Freight, FedEx Freight Economy, and FedEx Freight Priority.
• International Controlled Export Service Indicates that the Controlled Export service is requested. This is only applicable for international shipments. This might affect the shipping rates and/or service availability. When set, the IntlExportControlledExportType, IntlExportEntryNumber, IntlExportForeignTradeZoneCode, and IntlExportLicenseNumberExpiration properties should be set. Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.
• International Traffic in Arms Regulations Indicates that the Traffic in Arms Regulations service is requested. This is only applicable for international shipments. This might affect the shipping rates and/or service availability. When set, the IntlExportControlledExportType, IntlExportEntryNumber, IntlExportForeignTradeZoneCode, and IntlExportLicenseNumberExpiration properties should be set. Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.
• Liftgate Delivery: This indicates that the liftgate delivery service is requested for this shipment. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Liftgate Pickup: This indicates that the liftgate pickup service is requested for this shipment. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Poison: This indicates that the shipment contains poisonous materials. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Protection From Freezing: This indicates that the shipment should be protected from freezing. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Saturday Delivery: Requests the shipment be delivered on a Saturday. Saturday delivery service is available for an additional charge depending on the package service type and origin/destination pair. The rates and service availability depend on the ship date specified in the request. If the ship date falls on Thursday or Friday and Saturday delivery is desired, the ground option and some express option will not be valid. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx International Priority Freight, and FedEx Freight Priority.
• Saturday Pickup: Requests that the shipment be picked up on a Saturday. Saturday pickup service is available for an additional charge depending on the package service type and origin/destination pair. The rates and service availability depend on the ship date specified in the request. If the ship date falls on week day other than Saturday and Saturday pickup is desired, the ground option and some express option will not be valid. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx First Overnight Freight, FedEx International Priority Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Top Load: This indicates that the pallets in this shipment should not have anything stacked on top of them. This might affect the shipping rates and/or service availability. Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.

Data Type

Long64

SSLAcceptServerCertEncoded Property (FedExFreightRates Control)

This is the certificate (PEM/Base64 encoded).

Syntax

fedexfreightratescontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEncoded Property (FedExFreightRates Control)

This is the certificate (PEM/Base64 encoded).

Syntax

fedexfreightratescontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertStore Property (FedExFreightRates Control)

This is the name of the certificate store for the client certificate.

Syntax

fedexfreightratescontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (FedExFreightRates Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fedexfreightratescontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (FedExFreightRates Control)

This is the type of certificate store for this certificate.

Syntax

fedexfreightratescontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (FedExFreightRates Control)

This is the subject of the certificate used for client authentication.

Syntax

fedexfreightratescontrol.SSLCertSubject[=string]

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLProvider Property (FedExFreightRates Control)

This specifies the SSL/TLS implementation to use.

Syntax

fedexfreightratescontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

Additional Notes

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (FedExFreightRates Control)

This is the certificate (PEM/Base64 encoded).

Syntax

fedexfreightratescontrol.SSLServerCertEncoded

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

Timeout Property (FedExFreightRates Control)

A timeout for the control.

Syntax

fedexfreightratescontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TotalWeight Property (FedExFreightRates Control)

The total weight of all the pieces in this shipment.

Syntax

fedexfreightratescontrol.TotalWeight[=string]

Default Value

""

Remarks

This property is required when submitting a rate request by calling GetRates method. It requires one explicit decimal position (i.e. N.N formatting, example 5.0) and has a maximum length of 12 including the decimal.

Data Type

String

Config Method (FedExFreightRates Control)

Sets or retrieves a configuration setting.

Syntax

fedexfreightratescontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

GetRates Method (FedExFreightRates Control)

Returns rate information for a specified or all available FedEx services.

Syntax

fedexfreightratescontrol.GetRates 

Remarks

To get the courtesy rate quotes for FedEx services, you can call the GetRates method. If the rates are needed for a specific service type, you will have to pass a value of the RequestedService (other than 'UNSPECIFIED') in the request. The RequestedService identifies the FedEx service for which you want to retrieve rate information. If the rates are wanted for all available FedEx services, you should not set a value to RequestedService before sending the request to the FedEx Server. It will default to 'UNSPECIFIED').

In either case, the following properties or config settings are sent in the request (if any of these have not been set, their default values will be used instead):

• FedExAuthorizationToken (required)
• FedExServer (optional)
• FedExAccountNumber (required)
• RateType (required)
• ShipDate (optional)
• PackageType (required)
• SenderAddress (required)
• RecipientAddress (required)
• TotalWeight (required)
• InsuredValue (optional)
• Packages (required)
• ShipmentSpecialServices that can affect rates and/or service availability (such as COD, Saturday Pickup, Saturday Delivery, Hold At Location, Dry Ice, etc.) (optional)

Regarding the Packages, please note the following:

• when requesting rates for all available services (RequestedService set to 'UNSPECIFIED'), only one package should be added to this collection even for MPS. When rating MPS, just specify the Packages and the details for one package only. FedEx will consider all packages the same;
• when requesting rates for a specific service (RequestedService set to a value other than 'UNSPECIFIED'), you will have to add as many packages as there are in the MPS specifying the package detail for each package included in the shipment.

In each above mentioned cases, if there are no packages added and specified (Packages = null), the control will throw an error.

Upon a successful response, the Services property gets populated.

If there is a problem with any of the input values within the request, the response will either raise an error (when it's an hard error) and transaction will fail, or give a warning (when it's a soft error), which can be accessed via Warning, and the transaction will go through.

For more details on errors codes and descriptions, please refer to the Error Codes section.

Reset Method (FedExFreightRates Control)

Resets the internal state of the control and all properties to their default values.

Syntax

fedexfreightratescontrol.Reset 

Remarks

The Reset method does not have any parameters and does not return any value.

Error Event (FedExFreightRates Control)

Information about errors during data delivery.

Syntax

Sub fedexfreightratescontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Notification Event (FedExFreightRates Control)

Notification returned by the server upon successful request (if applicable).

Syntax

Sub fedexfreightratescontrol_Notification(Message As String)

Remarks

When sending a request, the server may return with a successful reply or an error. However, even when a transaction is successful, a warning or a note might still be returned by the server. In such cases, the Notification event is fired.

Notifications returned through this event are non-fatal and shipments will still be processes, labels will still be printable, rates are still returned, etc. These notifications should be treated as informational only.

SSLServerAuthentication Event (FedExFreightRates Control)

Fired after the server presents its certificate to the client.

Syntax

Sub fedexfreightratescontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (FedExFreightRates Control)

Fired when secure connection progress messages are available.

Syntax

Sub fedexfreightratescontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Config Settings (FedExFreightRates Control)

The control accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

FedExFreightRates Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

Socket Config Settings

Base Config Settings

Trappable Errors (FedExFreightRates Control)

FedExFreightRates Errors

	20302    Operation interrupted (or timeout).
	20433    Invalid index.
	20528    Server Error Response.
	20529    Property set with invalid data.

The control may also return one of the following error codes, which are inherited from other controls.