E-Payment Integrator 2022 C++ Builder Edition
Version 22.0 [Build 8593]

RecurringBilling Component

Properties   Methods   Events   Config Settings   Errors  

The RecurringBilling component is used to authorize and set up recurring transactions with any of the supported Internet Payment Gateways.

Syntax

TibpRecurringBilling

Remarks

The RecurringBilling component allows you to use multiple Internet Payment Gateways through one interface and one component. This allows for easy migration from one gateway to another, as well as quick integration into applications or web services.

RecurringBilling Gateway Setup and Required Properties

The RecurringBilling component allows your website to securely perform and setup recurring transactions without the need to redirect to a separate website. All transactions are accomplished through a secure HTTPS Post to any supported gateway. The secure response is received and then stored in the component's response properties. Any website or any stand-alone application can process transactions without the need for a secure server or third-party intervention.

Gateway Setup

The first thing you must do is select one of the many gateways supported by the RecurringBilling component, and set up an account with that gateway. Once you have an account set up with a valid (or test) login Id and password, you can use the RecurringBilling component.

To begin, set the Gateway property to the gateway you wish to use. If this gateway supports an alternate URL to send test transactions to, set the GatewayURL at this time.

Next, set the MerchantLogin (and for some gateways the MerchantPassword). These are supplied by your gateway vendor when you set up an account.

Many gateways have different setup requirements. See RecurringBilling Gateway Setup and Required Properties for details about each gateway's requirements.

Now you are ready to process transactions. For each transaction, you must set either Card or Bank. Most gateways will also require additional properties, such as CustomerAddress, CustomerFirstName, CustomerLastName, InvoiceNumber, etc.

Subscription Management

Once all required properties are set, you may create a recurring payment using the specified card or bank data by calling the CreateSubscription method. If the Gateway supports it, you may also Cancel recurring payments with the CancelSubscription method. Recurring payments that need to be changed may be updated with the UpdateSubscription method.

The following gateways are supported by the RecurringBilling component:

GatewayHome page
No Gateway (0) n/a
Authorize.Net AIM (1)http://www.authorize.net
eProcessing Transparent Database Engine (2)http://www.eProcessingNetwork.com
iTransact RediCharge HTML (4)http://www.itransact.com
PayFlow Pro (6)https://www.paypal.com/webapps/mpp/payflow-payment-gateway
USA ePay CGI Transaction Gateway (7)http://www.usaepay.com
Plug 'n Pay (8)http://www.plugnpay.com
Planet Payment iPay (9)http://planetpayment.com/
Merchant Anywhere (Transaction Central) (15)http://www.merchantanywhere.com/
SkipJack (16)http://www.skipjack.com
Chase Paymentech Orbital Gateway (23)https://merchantservices.chase.com/
LinkPoint (24)http://www.linkpoint.com
Moneris eSelect Plus Canada (25)http://www.moneris.com
NetworkMerchants Direct-Post API (28)http://www.nmi.com/
TransFirst Transaction Central Classic (formerly PRIGate) (30)www.transfirst.com
Merchant Partners (Transaction Engine) (31)http://www.merchantpartners.com/
First Data Global Gateway (Linkpoint) (33)http://www.firstdata.com
YourPay (Linkpoint) (34) http://www.yourpay.com
ACH Payments AGI (35)http://www.ach-payments.com
Forte AGI / Payments Gateway AGI(36)https://www.forte.net/
Cyber Source SOAP API (37)http://www.cybersource.com
eWay XML API (Australia) (38)http://www.eway.com.au/
Chase Merchant Services (Linkpoint) (41)http://www.chase.com
Thompson Merchant Services NexCommerce (iTransact mode) (42)http://www.thompsonmerchant.com
TransFirst Transaction Central (44)http://www.transfirst.com. (This is different from TransFirst eLink, supported above. The TransactionCentral gateway is also used by MerchantAnywhere and PRIGate)
Elavon/NOVA/My Virtual Merchant (49)http://www.myvirtualmerchant.com
Moneris eSelect Plus USA (52)http://www.moneris.com
Bambora / Beanstream Process Transaction API (53)https://www.bambora.com/en/ca/
Verifi Direct-Post API (54)http://www.verifi.com
Intuit QuickBooks Merchant Services (QBMS) (61)This gateway is no longer in service.
Litle Online Gateway (63)http://www.litle.com/
PayTrace Payment Gateway (70)https://www.paytrace.net/
TransNational Bankcard (74)http://www.tnbci.com/
Payscape (83)http://www.payscape.com
Authorize.NET CIM (85)http://www.authorize.net
WorldPay US Link Gateway (87)https://www.worldpay.com/en-us/index
3DSI Payment WorkSuite (88)http://www.3dsi.com/
First Data PayPoint (90)https://www.firstdata.com/en_us/customer-center/financial-institutions/paypoint.html
Converge (formerly MyVirtualMerchant) (93)https://support.convergepay.com/s/
PhoeniXGate Gateway (97)http://www.phoenixmanagednetworks.com/
Repay Gateway (98)https://www.repay.com/
PayWiser (98)http://www.paywiser.si/
BlueSnap Gateway (104)https://home.bluesnap.com/
BASYS Gateway (106)https://basyspro.com/
Square (108)https://www.squareup.com
Nuvei / GlobalOnePay (110)https://nuvei.com/en-us/

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

CardTypeType of credit card being used in this transaction.
CardCVVDataThree digit security code on back of card (optional).
CardCVVPresenceIndicates the presence of the card verification value.
CardEntryDataSourceThis property contains a 1-character code identifying the source of the customer data.
CardExpMonthExpiration month of the credit card specified in Number .
CardExpYearExpiration year of the credit card specified in Number .
CardIsEncryptedDetermines whether data set to the Number or MagneticStripe properties is validated.
CardMagneticStripeTrack data read off of the card's magnetic stripe.
CardNumberCustomer's credit card number for the transaction.
CustomerAddressCustomer's street address.
CustomerAddress2A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.
CustomerAggregateThis property allows you to get or set an XML aggregate built from all of the Customer properties.
CustomerCityCustomer's city.
CustomerCountryCustomer's country.
CustomerEmailCustomer's email address.
CustomerFaxCustomer's fax number.
CustomerFirstNameCustomer's first name.
CustomerFullNameCustomer's full name.
CustomerIdMerchant-generated customer Id.
CustomerLastNameCustomer's last name.
CustomerPhoneCustomer's phone number.
CustomerStateCustomer's state.
CustomerZipCustomer's zip code (or postal code if outside of the USA).
BankAccountClassIndicates whether a personal or business account is used for this transaction.
BankAccountHolderNameAccount holder's name.
BankAccountNumberBank account number for ACH transactions.
BankAccountTypeIndicates whether a checking or savings account is used for this transaction.
BankNameName of the account holder's bank.
BankRoutingNumberRouting number for ACH transactions.
ECheckPaymentTypeThe type of check payment request (commonly referred to as SEC Code).
GatewayGateway to process transactions with.
GatewayURLDefault URL for a specific Gateway .
InvoiceNumberMerchant-generated invoice number.
MerchantLoginMerchant's Gateway login.
MerchantPasswordMerchant's Gateway password.
PaymentScheduleEndDateThe end date of the subscription.
PaymentScheduleFrequencyThe frequency of payments.
PaymentScheduleFrequencyUnitThe unit of time to be used when calculating the frequency of payments.
PaymentScheduleInitialAmountThe initial amount to be charged (such as a trial period or setup fee).
PaymentScheduleRecurAmountThe amount to be charged on a recurring basis.
PaymentScheduleStartDateThe date on which the recurring payments will start processing.
PaymentScheduleTotalPaymentsThe total number of payments.
PaymentScheduleTrialPaymentsThe total number of trial payments.
ProxyAuthSchemeThis property is used to tell the component which type of authorization to perform when connecting to the proxy.
ProxyAutoDetectThis property tells the component whether or not to automatically detect and use proxy system settings, if available.
ProxyPasswordThis property contains a password if authentication is to be used for the proxy.
ProxyPortThis property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).
ProxyServerIf a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
ProxySSLThis property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.
ProxyUserThis property contains a user name, if authentication is to be used for the proxy.
ResponseApprovalCodeContains an authorization code when a transaction has been approved.
ResponseApprovedIndicates the status of the last transaction.
ResponseAVSResultContains the Address Verification System result code.
ResponseCodeIndicates the status of the authorization request.
ResponseCVVResultContains the returned CVV2 result code if it was requested.
ResponseDataThe entire response returned from the gateway processor.
ResponseErrorCodeAdditional error code returned by some gateways.
ResponseErrorTextAdditional error description returned by some gateways.
ResponseInvoiceNumberInvoice number submitted in authorization request (if applicable).
ResponseProcessorCodeResponse code from the underlying processor.
ResponseSubscriptionIdContains the Subscription or Profile Identifier for the recurring payment.
ResponseTextText information that describes each response code.
ResponseTransactionIdContains the Visa Transaction Identifier or MasterCard Reference Number.
ShippingAddressCustomer's shipping street address.
ShippingAddress2A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.
ShippingCityCustomer's shipping city.
ShippingCountryCustomer's shipping country.
ShippingEmailCustomer's email address.
ShippingFirstNameCustomer's first name.
ShippingLastNameCustomer's last name.
ShippingPhoneCustomer's phone number.
ShippingStateCustomer's shipping state.
ShippingZipCustomer's shipping zip code (or postal code if outside of the USA).
SpecialFieldCountThe number of records in the SpecialField arrays.
SpecialFieldNameName of special configuration property to submit in this transaction.
SpecialFieldValueValue of special configuration property to submit in this transaction.
SSLAcceptServerCertEncodedThis is the certificate (PEM/base64 encoded).
SSLCertEncodedThis is the certificate (PEM/base64 encoded).
SSLCertStoreThis is the name of the certificate store for the client certificate.
SSLCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreTypeThis is the type of certificate store for this certificate.
SSLCertSubjectThis is the subject of the certificate used for client authentication.
SSLProviderThis specifies the SSL/TLS implementation to use.
SSLServerCertEncodedThis is the certificate (PEM/base64 encoded).
SubscriptionDescDescription of recurring subscription.
SubscriptionDetailsCardExpMonthThe expiration month of the card currently being processed for the recurring payments.
SubscriptionDetailsCardExpYearThe expiration year of the card currently being processed for the recurring payments.
SubscriptionDetailsCardNumberThe card number currently being processed for the recurring payments.
SubscriptionDetailsEndDateThe date in which the recurring payments will stop processing.
SubscriptionDetailsFrequencyThe frequency in which payments will occur.
SubscriptionDetailsFrequencyUnitThe unit frequency in which the payments will be processed.
SubscriptionDetailsLastPaymentDateThe date that the last/previous transaction was processed.
SubscriptionDetailsNextPaymentDateThe date of the next upcoming transaction.
SubscriptionDetailsRecurAmountThe amount being charged on a recurring basis.
SubscriptionDetailsRemainingPaymentsThe total number of remaining payments until the recurring payments will stop processing.
SubscriptionDetailsStartDateThe date in which the recurring payments started processing.
SubscriptionDetailsStatusThe current status of the recurring subscription.
SubscriptionDetailsSubscriptionIdContains the Subscription or Profile Identifier for the recurring payment.
SubscriptionDetailsSubscriptionNameContains the name of the recurring subscription or profile.
SubscriptionDetailsTotalPaymentsThe total number of payments.
SubscriptionNameThe name of the recurring subscription or profile.
TestModeTurns test mode on and off for transactions sent to the current Gateway .
TimeoutA timeout for the component.
TransactionIdMerchant-generated transaction Id used for all transactions.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AddSpecialFieldAdds a special field name and the corresponding value.
CancelSubscriptionCancels or deletes a recurring payment subscription.
ConfigSets or retrieves a configuration setting.
CreateSubscriptionCreates a new recurring subscription.
DoEventsProcesses events from the internal message queue.
GetResponseVarParses additional information out of the response.
GetSubscriptionStatusRetrieves the status of a recurring payment subscription.
InterruptInterrupts the current action.
ResetSpecialFieldsResets all special fields to the default settings.
UpdateSubscriptionUpdates a recurring payment subscription.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ErrorInformation about errors during data delivery.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

3DSECIElectronic Commerce Indicator.
AmountFormatUsed to set the input format for TransactionAmount.
AuthNetCIMGuestProfileSpecifies whether a profile is a guest profile or a normal profile.
AuthNetCIMMaskedCardNumberThe masked card number returned for the payment profile at the specified index.
AuthNetCIMPaymentProfileCountThe number of Payment Profiles assigned to a customer profile within the Authorize.NET CIM gateway.
AuthNetCIMPaymentProfileIdThe Payment Profile ID assigned by Authorize.NET CIM gateway.
AuthNetCIMPaymentProfileIndexParses the Payment Profile contained at the specified index within a GetSusbcriptionStatus response.
AuthNetCIMRequestTypeThe request type to send for the Authorize.NET CIM gateway.
AuthNetCIMShippingAddressCountThe number of Shipping Addresses assigned to a customer profile within the Authorize.NET CIM gateway.
AuthNetCIMShippingAddressIdThe Shipping Address ID assigned by Authorize.NET CIM gateway.
AuthNetCIMShippingAddressIndexParses the Shipping Address contained at the specified index within a GetSusbcriptionStatus response.
AuthNetGetSubscriptionDetailsSpecifies whether a call to GetSubscriptionStatus will return the details of the subscription or just the status.
AuthNetOpaqueDescriptorAn Authorize.Net opaque data descriptor.
AuthNetOpaqueValueAn Authorize.Net opaque data value.
AuthNetShipToCompanyThe name of the company associated with the customer's shipping address.
BamboraUsernameThe Username used for authentication with the Bambora gateway.
BASYSCardInfoKeyBASYS Gateway Credit Card Info Key.
BASYSCheckInfoKeyBASYS Gateway Check Info Key.
BASYSContractIDBASYS Gateway Contract ID.
BASYSContractKeyBASYS Gateway Contract Key.
BASYSCustomerKeyBASYS Gateway Customer Key.
BASYSCustomerStatusIndicates the Customer Status.
BASYSNextBillingDateBASYS Gateway Next Billing Date.
BASYSNumberOfDaysNumber of days to be added to the next billing date.
BASYSPaymentTypeIndicates the Payment Type.
BASYSRequestTypeThe request type for the BASYS gateway.
BASYSTokenBASYS Gateway Token Value.
BASYSTokenModeIndicates the Token Type.
BlueSnapCardCountHow many card payment sources the last retrieved vaulted shopper has.
BlueSnapCardIndexDetermines which card payment source the component's fields are populated for currently.
BlueSnapEnterpriseUdfsUser-Defined Fields (UDFs) to send when updating a BlueSnap vaulted shopper.
BlueSnapGetTokenRetrieves a new hosted payment fields token (pfToken) from BlueSnap.
BlueSnapRequestTypeThe request type for the BlueSnap gateway.
BlueSnapVaultedShopperIdBlueSnap gateway vaulted shopper ID.
CardIssueNumberSpecial Issue Number used for Switch and Solo cards.
CardLast4DigitsThe last 4 digits of a credit card.
CardPresentSpecifies whether the card is present during the transaction.
CardStartMonthUsed for some international cards.
CardStartYearUsed for some international cards.
CardTokenThe credit card token.
CardTypeType of credit card being used in this transaction.
CheckNumberCheck Number.
CheckRoutingNumberDetermines whether to perform a checksum test on the RoutingNumber.
COFPermissionIndicates if the customer gave permission to make a Card On File transaction.
CompanyNameThe Customer's Company Name.
ConvenienceFeeThe total convenience fee charged for a transaction.
CustomerPasswordThe Customer's Password.
CustomerUsernameThe Customer's Username.
CyberSourceDeleteSubscriptionWhether subscriptions should be deleted when CancelSubscription is called.
CyberSourceXMLEscapeDetermines whether to XML escape the CyberSource gateway request field values.
DateFormatThe format of the date properties.
EscapeXMLAutomatically escape data within XML tags.
EwayCustomerIdThe Customer Id used to authenticate with the Eway gateway.
EwayInitialDateThe date of the initial payment for the Eway gateway.
EwayTransactionTypeThe Transaction Type for the Eway gateway.
FirstDataPayPointAgreedToTermsSpecifies whether the customer has approved the registration process and agreed to the terms for the FirstDataPayPoint gateway.
FirstDataPayPointTransactionTypeThe Transaction Type for the FirstDataPayPoint gateway.
HashAlgorithmAlgorithm used for hashing.
HashSecretSecurity key used to generate a hash for gateways supporting such functionality.
LicenseDOBCustomer's Date of Birth as indicated on his drivers license.
LicenseNumberCustomer's driver's license number.
LicenseStateState in which customer's driver's license was issued.
LitleCardholderIdDescribes the method used to identify the cardholder at the point of sale for the Litle gateway.
LitleSubscriptionAggregateUsed to specify an XML aggregate for Subscription Create and Update transactions within the Litle gateway.
LitleTransactionTypeThe Transaction Type for the Litle gateway.
LitleTrialFrequencyUsed to specify a trial frequency for the Litle gateway.
MerchantCodeA gateway-supplied merchant number, code, or Id.
MerchantPartnersLast4DigitsThe last 4 digits of the account number for a transaction processed via the MerchantPartners or WorldPay Link gateways.
MerchantPartnersReaderTypeThe reader type used to read and encrypt a swiped card for the MerchantPartners or WorldPay Link gateways.
MITFlagFor the MIT framework - Used to indicate that a transaction is merchant initiated.
MITPriorTransIdFor the MIT framework - Used to specify a prior transaction id to be referenced in a merchant initiated transaction.
MITTypeFor the MIT framework - Indicates the type of transaction being requested in a Merchant-Initiated Transaction (MIT).
MyVirtualMerchantUserIdThe MyVirtualMerchant user Id as configured on VirtualMerchant.
NetBillingVersionThe Version to be sent in the User-Agent heading of a NetBilling gateway request.
NuveiPermittedTerminalsA list of the terminals permitted to use a Nuvei secure card.
OmniFundTransactionTypeThe Transaction Type for the OmniFund gateway.
OrbitalConnectionPasswordOrbital Connection Password field used by the Orbital gateway.
OrbitalConnectionUsernameOrbital Connection Username field used by the Orbital gateway.
OrbitalCustomerProfileFromOrderIndCustomer Profile Number generation Options for the Orbital gateway.
OrbitalCustomerProfileOrderOverrideIndIndicator to specify how the CustomerId is leveraged to populate other data sets for the Orbital gateway.
PayerIPThe IP address of the payer.
PaymentWorkSuiteClientCodeThe 3DSI assigned client code sent in a request to the PaymentWorksuite gateway.
PaymentWorkSuiteLocationCodeThe 3DSI assigned location code sent in a request to the PaymentWorksuite gateway.
PaymentWorkSuiteMerchantCodeThe 3DSI assigned merchant code sent in a request to the PaymentWorksuite gateway.
PaymentWorkSuiteTransactionTypeThe transaction type to send for the Payment WorkSuite gateway.
PayTraceIntegratorIdUsed to specify the Integrator Id value assigned by the PayTrace gateway.
PayTraceTransactionTypeThe Transaction Type for the PayTrace gateway.
PayWiserCardTokenPayWiser Gateway Card Token Value.
PayWiserPaymentHourPayment hour.
PayWiserPlanPatternPayWiser plan pattern for creating a recurring plan.
PayWiserRecurringPlanIdPayWiser Recurring Plan Id.
PayWiserRequestTypeThe request type for the PayWiser gateway.
PayWiserRetryPatternPayWiser retry pattern for retrying failed payments.
PayWiserTokenReferenceIdPayWiser Gateway Token Reference Id.
PhoeniXGateCardInfoKeyPhoeniXGate Gateway Credit Card Info Key.
PhoeniXGateCheckInfoKeyPhoeniXGate Gateway Check Info Key.
PhoeniXGateContractIDPhoeniXGate Gateway Contract ID.
PhoeniXGateContractKeyPhoeniXGate Gateway Contract Key.
PhoeniXGateCustomerKeyPhoeniXGate Gateway Customer Key.
PhoeniXGateCustomerStatusIndicates the Customer Status.
PhoeniXGateNextBillingDatePhoeniXGate Gateway Next Billing Date.
PhoeniXGateNumberOfDaysNumber of days to be added to the next billing date.
PhoeniXGatePaymentTypeIndicates the Payment Type.
PhoeniXGateRequestTypeThe request type for the PhoeniXGate gateway.
PhoeniXGateTokenPhoeniXGate Gateway Token Value.
PhoeniXGateTokenModeIndicates the Token Type.
PlanetPaymentFrequencyDateThe date of the month that a recurring payment should occur for the Planet Payment gateway.
PlanetPaymentFrequencyDayThe day that a recurring payment should occur for the Planet Payment gateway.
PlanetPaymentFrequencyMonthThe month that a recurring payment should occur for the Planet Payment gateway.
QBMSTransactionTypeThe Transaction Type for the QBMS gateway.
RawRequestReturns the data that was sent to the gateway.
RawResponseReturns the data that was received from the gateway.
RepayCardInfoKeyRepay Gateway Credit Card Info Key.
RepayCheckInfoKeyRepay Gateway Check Info Key.
RepayContractIDRepay Gateway Contract ID.
RepayContractKeyRepay Gateway Contract Key.
RepayCustomerKeyRepay Gateway Customer Key.
RepayCustomerStatusIndicates the Customer Status.
RepayNextBillingDateRepay Gateway Next Billing Date.
RepayNumberOfDaysNumber of days to be added to the next billing date.
RepayPaymentTypeIndicates the Payment Type.
RepayRequestTypeThe request type for the Repay gateway.
RepayTokenRepay Gateway Token Value.
RepayTokenModeIndicates the Token Type.
SkipJackStatusIndexGets subscription details at the specified status index.
SquareCustomerCardCountThe number of cards saved to the Square customer profile.
SquareCustomerCardIdThe Id of a card saved to a Square customer profile.
SquareCustomerCardIndexWhich card's details to populate the component with from the retreived Square customer profile.
SquareRequestTypeWhat type of Square customer data to create or delete.
StoreCardOnFileFor the Stored Credentials framework - Used to indicate that the merchant will be storing the customer's card on file (COF).
TaxIdCompany's Tax Id or a Customer's Social Security Number.
TerminalCapabilityThe capability of the terminal that is used to submit the transaction.
TerminalIdTerminal Id value sent in the transaction.
TerminalTypeThe terminal type that is used to submit the transaction.
UseCardOnFileFor the Stored Credentials framework - Used to indicate that the merchant is using stored card on file (COF) information for the request.
XChildrenCountThe number of child elements of the current element.
XChildrenName[x]The name of the child element.
XChildrenXText[x]The inner text of the child element.
XElementThe name of the current element.
XPathProvides a way to point to a specific element in the returned XML or JSON response.
XTextThe text of the current element.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowHTTPFallbackWhether HTTP/2 connections are permitted to fallback to HTTP/1.1.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequestSet to true to compress the body of a PUT or POST request.
EncodeURLIf set to True the URL will be encoded by the component.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to True the component will perform a GET on the new location.
HTTP2HeadersWithoutIndexingHTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersionThe version of HTTP used by the component.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
LogLevelThe level of detail that is logged.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
NegotiatedHTTPVersionThe negotiated HTTP version.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
SentHeadersThe full set of headers as sent by the client.
StatusLineThe first line of the last response from the server.
TransferredDataThe contents of the last response from the server.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the component.
TransferredHeadersThe full set of headers as received from the server.
TransferredRequestThe full request as sent by the client.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
UseIDNsWhether to encode hostnames to internationalized domain names.
UseProxyAutoConfigURLWhether to use a Proxy auto-config file when attempting a connection.
UserAgentInformation about the user agent (browser).
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the component binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSPWhether to use OCSP to check the status of the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated ciphersuite.
SSLNegotiatedCipherStrengthReturns the negotiated ciphersuite strength.
SSLNegotiatedCipherSuiteReturns the negotiated ciphersuite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveWhether sensitive data is masked in log messages.
UseInternalSecurityAPITells the component whether or not to use the system security libraries or an internal implementation.

CardType Property (RecurringBilling Component)

Type of credit card being used in this transaction.

Syntax

__property TibpRecurringBillingCardTypes CardType = { read=FCardType, write=FSetCardType };
enum TibpRecurringBillingCardTypes { ctUnknown=0, ctVisa=1, ctMasterCard=2, ctAMEX=3, ctDiscover=4, ctDiners=5, ctJCB=6, ctVisaElectron=7, ctMaestro=8, ctLaser=10 };

Default Value

ctUnknown

Remarks

Type of credit card being used in this transaction. This property contains the customer's credit card type. This is automatically computed after the CardNumber is set, but it can also be changed manually. A list of valid card types is included below.

ctUnknown (0) Invalid or unknown prefix, card type not known.
ctVisa (1) Visa or Delta Card.
ctMasterCard (2) MasterCard.
ctAMEX (3) American Express Card.
ctDiscover (4) Discover Card.
ctDiners (5) Diners Club or Carte Blanche Card.
ctJCB (6) JCB Card.
ctVisaElectron (7) Visa Electron Card (runs as a Visa for most gateways)
ctMaestro (8) Maestro Card
ctLaser (10) Laser Card (Ireland)

This property is not available at design time.

Data Type

Integer

CardCVVData Property (RecurringBilling Component)

Three digit security code on back of card (optional).

Syntax

__property String CardCVVData = { read=FCardCVVData, write=FSetCardCVVData };

Default Value

""

Remarks

Three digit security code on back of card (optional).

This alphanumeric property contains the three digit Visa "Card Verification Value" (CVV), MasterCard "Card Verification Code" (CVC), or four-digit American Express "Card Identification Number" (CID). This value appears as additional characters embossed on the card signature line following the credit card account number on the back of the credit card. This is an optional property which can be used to determine if the customer is actually in possession of the credit card.

Even if the CardCVVData is incorrect, the transaction may still be authorized. It is up to the merchant to examine the ResponseCVVResult property and decide whether to honor the transaction or not.

Note: When set to a non-empty value, CardCVVPresence will be automatically set to cvpProvided. If set to empty string (""), CardCVVPresence will be automatically set to cvpNotProvided.

This property is not available at design time.

Data Type

String

CardCVVPresence Property (RecurringBilling Component)

Indicates the presence of the card verification value.

Syntax

__property TibpRecurringBillingCardCVVPresences CardCVVPresence = { read=FCardCVVPresence, write=FSetCardCVVPresence };
enum TibpRecurringBillingCardCVVPresences { cvpNotProvided=0, cvpProvided=1, cvpIllegible=2, cvpNotOnCard=3 };

Default Value

cvpNotProvided

Remarks

Indicates the presence of the card verification value.

This property is used to indicate the presence of CardCVVData.

The component will automatically set this value to cvpProvided when a CardCVVData value is specified. You can explicitly specify the CardCVVPresence indicator by setting this property.

Available values are:

  • cvpNotProvided (0)
  • cvpProvided (1)
  • cvpIllegible (2)
  • cvpNotOnCard (3)

This property is not available at design time.

Data Type

Integer

CardEntryDataSource Property (RecurringBilling Component)

This property contains a 1-character code identifying the source of the customer data.

Syntax

__property TibpRecurringBillingCardEntryDataSources CardEntryDataSource = { read=FCardEntryDataSource, write=FSetCardEntryDataSource };
enum TibpRecurringBillingCardEntryDataSources { edsTrack1=0, edsTrack2=1, edsManualEntryTrack1Capable=2, edsManualEntryTrack2Capable=3, edsManualEntryNoCardReader=4, edsTrack1Contactless=5, edsTrack2Contactless=6, edsManualEntryContactlessCapable=7, edsIVR=8, edsKiosk=9 };

Default Value

edsTrack1

Remarks

This property contains a 1-character code identifying the source of the customer data. The table below shows all supported values for this property.

edsTrack1 (0) Full Magnetic stripe read and transmit, Track 1.
edsTrack2 (1) Full magnetic stripe read and transmit, Track 2.
edsManualEntryTrack1Capable (2) Manually keyed, Track 1 capable.
edsManualEntryTrack2Capable (3)Manually keyed, Track 2 capable.
edsManualEntryNoCardReader (4)Manually keyed, terminal has no card reading capability (use this for e-commerce and MOTO transactions).
edsTrack2Contactless (6)Full magnetic stripe read (Track 2 only), Chip Card capable terminal (Visa, Mastercard, and JCB Transactions only).
edsManualEntryContactlessCapable (7)Manually keyed, Chip Card read capable terminal (Visa, MasterCard, and JCB transactions only).

This property is not available at design time.

Data Type

Integer

CardExpMonth Property (RecurringBilling Component)

Expiration month of the credit card specified in Number .

Syntax

__property int CardExpMonth = { read=FCardExpMonth, write=FSetCardExpMonth };

Default Value

1

Remarks

Expiration month of the credit card specified in CardNumber.

This property contains the expiration date of the customer's credit card, and must be in the range 1 - 12.

This property is not available at design time.

Data Type

Integer

CardExpYear Property (RecurringBilling Component)

Expiration year of the credit card specified in Number .

Syntax

__property int CardExpYear = { read=FCardExpYear, write=FSetCardExpYear };

Default Value

2000

Remarks

Expiration year of the credit card specified in CardNumber.

This property contains the expiration date of the customer's credit card. This property must be in the range 0 - 99, or 2000 - 2099. Any date before the year 2000 or after 2099 cannot be specified.

This property is not available at design time.

Data Type

Integer

CardIsEncrypted Property (RecurringBilling Component)

Determines whether data set to the Number or MagneticStripe properties is validated.

Syntax

__property bool CardIsEncrypted = { read=FCardIsEncrypted, write=FSetCardIsEncrypted };

Default Value

false

Remarks

Determines whether data set to the CardNumber or CardMagneticStripe fields is validated.

By default, when the CardNumber or CardMagneticStripe fields are set, the value will be validated and normalized. For instance, "4444-33332222 1111" will be normalized as "4444333322221111" and CardMagneticStripe data will be parsed for the track specified by CardEntryDataSource. However, any other non-numerical data entered will cause an exception to be thrown. It may be useful in some gateways to send other data in the CardNumber or CardMagneticStripe fields, and this can be accomplished by setting IsEncrypted to true. However, please note that in doing so automatic calculation of the CardType may be affected, and the card number will not be verified.

This property is not available at design time.

Data Type

Boolean

CardMagneticStripe Property (RecurringBilling Component)

Track data read off of the card's magnetic stripe.

Syntax

__property String CardMagneticStripe = { read=FCardMagneticStripe, write=FSetCardMagneticStripe };

Default Value

""

Remarks

Track data read off of the card's magnetic stripe.

If CardEntryDataSource is not one of the manually entered enumerations, then this property must be set with the track1 or track2 data from the magnetic stripe on the back of the customer's credit card. This includes everything after but not including the start sentinel (% or ;) and up to but not including the end sentinel (?) and LRC check character. You may only set this property with track 1 or track 2 data, and may not pass both. Use the CardEntryDataSource property to indicate which track you are sending.

The following example shows how to set the CardMagneticStripe and CardEntryDataSource properties if the data read off the card is "%B4788250000028291^TSYS^05121015432112345678?;4788250000028291=05121015432112345678?"

component.CardMagneticStripe = "B4788250000028291^TSYS^05121015432112345678" component.CardEntryDataSource = edsTrack1 or component.CardMagneticStripe = "4788250000028291=05121015432112345678" component.CardEntryDataSource = edsTrack2

Industry regulations do not allow merchants or processors to store track data in any form of persistent storage. Failure to abide by this regulation can result in significant fines and other penalties.

This property is not available at design time.

Data Type

String

CardNumber Property (RecurringBilling Component)

Customer's credit card number for the transaction.

Syntax

__property String CardNumber = { read=FCardNumber, write=FSetCardNumber };

Default Value

""

Remarks

Customer's credit card number for the transaction.

If you're sending the transaction with CardMagneticStripe data, this property should be left empty.

This property is not available at design time.

Data Type

String

CustomerAddress Property (RecurringBilling Component)

Customer's street address.

Syntax

__property String CustomerAddress = { read=FCustomerAddress, write=FSetCustomerAddress };

Default Value

""

Remarks

Customer's street address. This property is used as part of the Address Verification Service (AVS) and contains the customer's street address as it appears on their monthly statement. Only the street number, street name, and apartment number are required in This property. City, state, and zip code are set in the CustomerCity, CustomerState, and CustomerZip properties.

The length of this property varies by gateway. If the customer's address is very long, it is admissible to include only the street number in This property.

NOTE: For the Moneris gateway, this property should contain only the customer's street number. The street name should be added via the AddSpecialField method. For example:

component.CustomerAddress = "123" component.AddSpecialField("avs_street_name", "Nowhere Ln")

This property is not available at design time.

Data Type

String

CustomerAddress2 Property (RecurringBilling Component)

A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.

Syntax

__property String CustomerAddress2 = { read=FCustomerAddress2, write=FSetCustomerAddress2 };

Default Value

""

Remarks

A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.).

This property is not available at design time.

Data Type

String

CustomerAggregate Property (RecurringBilling Component)

This property allows you to get or set an XML aggregate built from all of the Customer properties.

Syntax

__property String CustomerAggregate = { read=FCustomerAggregate, write=FSetCustomerAggregate };

Default Value

""

Remarks

This property allows you to get or set an XML aggregate built from all of the Customer properties. "EPCustomer" is the root element. The Customer properties make up the tags under the root, but without the beginning "Customer". For instance: <EPCustomer> <Address>123 Nowhere Ln.</Address> <Address2>Apt 3B.</Address2> <City>Beverly Hills</City> ... </EPCustomer>

This property is not available at design time.

Data Type

String

CustomerCity Property (RecurringBilling Component)

Customer's city.

Syntax

__property String CustomerCity = { read=FCustomerCity, write=FSetCustomerCity };

Default Value

""

Remarks

Customer's city. This property is used as part of the Address Verification Service (AVS) and contains the customer's city as it appears on their monthly statement. Other AVS properties include CustomerAddress, CustomerState, and CustomerZip.

This property is not available at design time.

Data Type

String

CustomerCountry Property (RecurringBilling Component)

Customer's country.

Syntax

__property String CustomerCountry = { read=FCustomerCountry, write=FSetCustomerCountry };

Default Value

""

Remarks

Customer's country. This property contains the country in which the customer is located. Most gateways use a two-letter country code, specified in ISO-3166.

Note: If using this property with the PayFuse gateway, this property should contain the ISO-3166 numeric code instead of the standard two-letter code. For example, the ISO code for the US is "840".

This property is not available at design time.

Data Type

String

CustomerEmail Property (RecurringBilling Component)

Customer's email address.

Syntax

__property String CustomerEmail = { read=FCustomerEmail, write=FSetCustomerEmail };

Default Value

""

Remarks

Customer's email address. This optional property contains the customer's email address.

This property is not available at design time.

Data Type

String

CustomerFax Property (RecurringBilling Component)

Customer's fax number.

Syntax

__property String CustomerFax = { read=FCustomerFax, write=FSetCustomerFax };

Default Value

""

Remarks

Customer's fax number. This optional property contains the customer's fax number.

This property is not available at design time.

Data Type

String

CustomerFirstName Property (RecurringBilling Component)

Customer's first name.

Syntax

__property String CustomerFirstName = { read=FCustomerFirstName, write=FSetCustomerFirstName };

Default Value

""

Remarks

Customer's first name. This property contains the customer's first name.

This property is not available at design time.

Data Type

String

CustomerFullName Property (RecurringBilling Component)

Customer's full name.

Syntax

__property String CustomerFullName = { read=FCustomerFullName, write=FSetCustomerFullName };

Default Value

""

Remarks

Customer's full name. This property contains the customer's full name as it appears on the credit card or bank account. Many gateways use this property in addition to, or instead of, the CustomerFirstName and CustomerLastName properties. If a gateway requires a CustomerFullName and the property is empty, CustomerFullName will be constructed using the contents of CustomerFirstName and CustomerLastName.

This property is not available at design time.

Data Type

String

CustomerId Property (RecurringBilling Component)

Merchant-generated customer Id.

Syntax

__property String CustomerId = { read=FCustomerId, write=FSetCustomerId };

Default Value

""

Remarks

Merchant-generated customer Id. This property contains a merchant-generated customer identification number. This number should be unique for each different customer that places an order with the merchant.

This property is not available at design time.

Data Type

String

CustomerLastName Property (RecurringBilling Component)

Customer's last name.

Syntax

__property String CustomerLastName = { read=FCustomerLastName, write=FSetCustomerLastName };

Default Value

""

Remarks

Customer's last name. This property contains the customer's last name as it appears on their credit card.

This property is not available at design time.

Data Type

String

CustomerPhone Property (RecurringBilling Component)

Customer's phone number.

Syntax

__property String CustomerPhone = { read=FCustomerPhone, write=FSetCustomerPhone };

Default Value

""

Remarks

Customer's phone number. This optional property contains the customer's phone number.

This property is not available at design time.

Data Type

String

CustomerState Property (RecurringBilling Component)

Customer's state.

Syntax

__property String CustomerState = { read=FCustomerState, write=FSetCustomerState };

Default Value

""

Remarks

Customer's state. This property is used as part of the Address Verification Service (AVS) and contains the two character postal abbreviation of the customer's state as it appears on their monthly statement. Other AVS properties include CustomerAddress, CustomerCity, and CustomerZip.

This property is not available at design time.

Data Type

String

CustomerZip Property (RecurringBilling Component)

Customer's zip code (or postal code if outside of the USA).

Syntax

__property String CustomerZip = { read=FCustomerZip, write=FSetCustomerZip };

Default Value

""

Remarks

Customer's zip code (or postal code if outside of the USA). This property is used as part of the Address Verification Service (AVS), and contains the customer's zip code as it appears on their monthly statement. Other AVS properties include CustomerAddress, CustomerCity, and CustomerState.

This property is not available at design time.

Data Type

String

BankAccountClass Property (RecurringBilling Component)

Indicates whether a personal or business account is used for this transaction.

Syntax

__property TibpRecurringBillingBankAccountClass BankAccountClass = { read=FBankAccountClass, write=FSetBankAccountClass };
enum TibpRecurringBillingBankAccountClass { acPersonal=0, acBusiness=1 };

Default Value

acPersonal

Remarks

Indicates whether a personal or business account is used for this transaction.

Available values:

Value Definition
acPersonal (0) Personal Account.
acBusiness (1) Business Account.

This property is not available at design time.

Data Type

Integer

BankAccountHolderName Property (RecurringBilling Component)

Account holder's name.

Syntax

__property String BankAccountHolderName = { read=FBankAccountHolderName, write=FSetBankAccountHolderName };

Default Value

""

Remarks

Account holder's name. This property contains the customer's name as it appears on their account. Many gateways use this property in addition to, or instead of, the Customer Firsts and Last name properties. Note that if this property is not specified, the FullName property from the EPCustomer type will be used instead.

This property is not available at design time.

Data Type

String

BankAccountNumber Property (RecurringBilling Component)

Bank account number for ACH transactions.

Syntax

__property String BankAccountNumber = { read=FBankAccountNumber, write=FSetBankAccountNumber };

Default Value

""

Remarks

Bank account number for ACH transactions. This property contains the customer's bank account number, which along with the BankRoutingNumber identify the location of the account where funds are to be drawn from for ACH transactions. This property is required for all ACH transactions.

This property is not available at design time.

Data Type

String

BankAccountType Property (RecurringBilling Component)

Indicates whether a checking or savings account is used for this transaction.

Syntax

__property TibpRecurringBillingBankAccountTypes BankAccountType = { read=FBankAccountType, write=FSetBankAccountType };
enum TibpRecurringBillingBankAccountTypes { atChecking=0, atSavings=1 };

Default Value

atChecking

Remarks

Indicates whether a checking or savings account is used for this transaction. For gateways that support it, this property allows funds to be withdrawn (or added in the case of a Credit) from either the customer's Checking or Savings account.

Available values:

Value Definition
atChecking (0) Checking Account.
atSavings (1) Savings Account.

This property is not available at design time.

Data Type

Integer

BankName Property (RecurringBilling Component)

Name of the account holder's bank.

Syntax

__property String BankName = { read=FBankName, write=FSetBankName };

Default Value

""

Remarks

Name of the account holder's bank. For example, Citibank, Wells-Fargo, Wachovia, etc. This property contains the name of the bank associated with the BankRoutingNumber.

This property is not available at design time.

Data Type

String

BankRoutingNumber Property (RecurringBilling Component)

Routing number for ACH transactions.

Syntax

__property String BankRoutingNumber = { read=FBankRoutingNumber, write=FSetBankRoutingNumber };

Default Value

""

Remarks

Routing number for ACH transactions. This property contains the routing number to the customer's bank (Also known as an ABA code). This number indicates at which bank the BankAccountNumber is located, and is used to identify the location of the account where funds are to be drawn from for ACH transactions. This property is required for all ACH transactions.

Note: When using ACHPayments gateway, a leading zero must be added for Canadian bank accounts.

This property is not available at design time.

Data Type

String

ECheckPaymentType Property (RecurringBilling Component)

The type of check payment request (commonly referred to as SEC Code).

Syntax

__property TibpRecurringBillingECheckPaymentTypes ECheckPaymentType = { read=FECheckPaymentType, write=FSetECheckPaymentType };
enum TibpRecurringBillingECheckPaymentTypes { ptWEB=0, ptPPD=1, ptTEL=2, ptCCD=3, ptARC=4, ptBOC=5, ptPOP=6, ptRCK=7 };

Default Value

ptWEB

Remarks

This property is used to specify the payment type of the check transaction.

Available values:

Value Definition
ptWEB (0) Internet Initiated Entry. Transaction was received from consumer via the Internet (ie shopping cart). Web transactions require a drop-down 'I agree' or a standard form of acknowledgment initiated by the customer.
ptPPD (1) Prearranged Payment or Deposit. Credits or Debits that have been pre-arranged by consumers to draft from their personal bank account. Typically used for recurring payments. Signed Authorization by Customer required, or contract language along with voided check.
ptTEL (2) Telephone Initiated Entry. Transaction information was received via the telephone. Transactions Authorization script must be recorded at the time the transaction is processed, or written acknowledgment sent to the customer.
ptCCD (3) Cash Concentration or Disbursement. Used for the transfer of funds between entities. Signed Authorization by Customer required.
ptARC (4) Accounts Receivable Conversion. Used for payments being made against a bill such as a utility. Signed Authorization by Customer required.
ptBOC (5) Back Office Conversion. Paper checks that are collected in a retail environment and then scanned and batched electronically. Customer notification 'Checks are Electronically Processed' required at Point of Sale.
ptPOP (6) Point-of-Purchase. Paper checks that are converted (scanned) into electronic format at the point of sale. The original paper check is voided and returned to the customer. Point of Sale is authorization.
ptRCK (7) Re-Presentation Check. After a check has been return for insufficient funds it may be attempted again using this format. RCK may only be retried once. Customer notification 'Returned Checks are Electronically Re-Processed' required at Point of Sale.

Data Type

Integer

Gateway Property (RecurringBilling Component)

Gateway to process transactions with.

Syntax

__property TibpRecurringBillingGateways Gateway = { read=FGateway, write=FSetGateway };
enum TibpRecurringBillingGateways { rbgwNoGateway=0, rbgwAuthorizeNet=1, rbgwEprocessing=2, rbgwITransact=4, rbgwPayFlowPro=6, rbgwUSAePay=7, rbgwPlugNPay=8, rbgwPlanetPayment=9, rbgwMerchantAnywhere=15, rbgwSkipjack=16, rbgwOrbital=23, rbgwLinkPoint=24, rbgwMoneris=25, rbgwNetworkMerchants=28, rbgwPRIGate=30, rbgwMerchantPartners=31, rbgwFirstData=33, rbgwYourPay=34, rbgwACHPayments=35, rbgwForte=36, rbgwCyberSource=37, rbgwEway=38, rbgwChase=41, rbgwNexCommerce=42, rbgwTransactionCentral=44, rbgwMyVirtualMerchant=49, rbgwMonerisUSA=52, rbgwBambora=53, rbgwVerifi=54, rbgwQBMS=61, rbgwLitle=63, rbgwPayTrace=70, rbgwOmniFund=73, rbgwTransNationalBankcard=74, rbgwPayscape=83, rbgwAuthorizeNetCIM=85, rbgwWorldPayLink=87, rbgwPaymentWorkSuite=88, rbgwFirstDataPayPoint=90, rbgwConverge=93, rbgwAuthorizeNetXML=96, rbgwPhoeniXGate=97, rbgwRepay=98, rbgwPayWiser=100, rbgwBlueSnap=104, rbgwBASYS=106, rbgwSquare=108, rbgwNuvei=110 };

Default Value

rbgwNoGateway

Remarks

This property is used to select the gateway with which transactions will be processed. Setting the Gateway property will also fill the GatewayURL, SpecialFieldName, and SpecialFieldValue properties with default data for the selected gateway. The following table shows the currently supported gateways, as well as the corporate home page for each.

GatewayHome page
No Gateway (0) n/a
Authorize.Net AIM (1)http://www.authorize.net
eProcessing Transparent Database Engine (2)http://www.eProcessingNetwork.com
iTransact RediCharge HTML (4)http://www.itransact.com
PayFlow Pro (6)https://www.paypal.com/webapps/mpp/payflow-payment-gateway
USA ePay CGI Transaction Gateway (7)http://www.usaepay.com
Plug 'n Pay (8)http://www.plugnpay.com
Planet Payment iPay (9)http://planetpayment.com/
Merchant Anywhere (Transaction Central) (15)http://www.merchantanywhere.com/
SkipJack (16)http://www.skipjack.com
Chase Paymentech Orbital Gateway (23)https://merchantservices.chase.com/
LinkPoint (24)http://www.linkpoint.com
Moneris eSelect Plus Canada (25)http://www.moneris.com
NetworkMerchants Direct-Post API (28)http://www.nmi.com/
TransFirst Transaction Central Classic (formerly PRIGate) (30)www.transfirst.com
Merchant Partners (Transaction Engine) (31)http://www.merchantpartners.com/
First Data Global Gateway (Linkpoint) (33)http://www.firstdata.com
YourPay (Linkpoint) (34) http://www.yourpay.com
ACH Payments AGI (35)http://www.ach-payments.com
Forte AGI / Payments Gateway AGI(36)https://www.forte.net/
Cyber Source SOAP API (37)http://www.cybersource.com
eWay XML API (Australia) (38)http://www.eway.com.au/
Chase Merchant Services (Linkpoint) (41)http://www.chase.com
Thompson Merchant Services NexCommerce (iTransact mode) (42)http://www.thompsonmerchant.com
TransFirst Transaction Central (44)http://www.transfirst.com. (This is different from TransFirst eLink, supported above. The TransactionCentral gateway is also used by MerchantAnywhere and PRIGate)
Elavon/NOVA/My Virtual Merchant (49)http://www.myvirtualmerchant.com
Moneris eSelect Plus USA (52)http://www.moneris.com
Bambora / Beanstream Process Transaction API (53)https://www.bambora.com/en/ca/
Verifi Direct-Post API (54)http://www.verifi.com
Intuit QuickBooks Merchant Services (QBMS) (61)This gateway is no longer in service.
Litle Online Gateway (63)http://www.litle.com/
PayTrace Payment Gateway (70)https://www.paytrace.net/
TransNational Bankcard (74)http://www.tnbci.com/
Payscape (83)http://www.payscape.com
Authorize.NET CIM (85)http://www.authorize.net
WorldPay US Link Gateway (87)https://www.worldpay.com/en-us/index
3DSI Payment WorkSuite (88)http://www.3dsi.com/
First Data PayPoint (90)https://www.firstdata.com/en_us/customer-center/financial-institutions/paypoint.html
Converge (formerly MyVirtualMerchant) (93)https://support.convergepay.com/s/
PhoeniXGate Gateway (97)http://www.phoenixmanagednetworks.com/
Repay Gateway (98)https://www.repay.com/
PayWiser (98)http://www.paywiser.si/
BlueSnap Gateway (104)https://home.bluesnap.com/
BASYS Gateway (106)https://basyspro.com/
Square (108)https://www.squareup.com
Nuvei / GlobalOnePay (110)https://nuvei.com/en-us/

Data Type

Integer

GatewayURL Property (RecurringBilling Component)

Default URL for a specific Gateway .

Syntax

__property String GatewayURL = { read=FGatewayURL, write=FSetGatewayURL };

Default Value

""

Remarks

This property is used to change the default URL for a specific Gateway. This is useful for specifying a different URL for testing purposes, or to support additional gateway processors that share a protocol format (such as additional Authorize.net compatible gateways). Please note that the proper "http://" or "https://" formatting must be observed. See "Testing Information" in the Table of Contents for a list of test URLs.

Data Type

String

InvoiceNumber Property (RecurringBilling Component)

Merchant-generated invoice number.

Syntax

__property String InvoiceNumber = { read=FInvoiceNumber, write=FSetInvoiceNumber };

Default Value

""

Remarks

This field contains a merchant-generated invoice number. This number should be unique for each transaction. This property is optional for most gateways, but it is recommended that the merchant use an invoice number to keep track of transactions. See the Gateway property to determine if this is a required or optional field for the gateway you are using.

Data Type

String

MerchantLogin Property (RecurringBilling Component)

Merchant's Gateway login.

Syntax

__property String MerchantLogin = { read=FMerchantLogin, write=FSetMerchantLogin };

Default Value

""

Remarks

This is the login Id supplied by the Gateway you signed up with to process credit card transactions.

Data Type

String

MerchantPassword Property (RecurringBilling Component)

Merchant's Gateway password.

Syntax

__property String MerchantPassword = { read=FMerchantPassword, write=FSetMerchantPassword };

Default Value

""

Remarks

This is the password supplied by the Gateway you signed up with to process credit card transactions. Some gateways require passwords only for Credit or Void transactions, some require it for all transactions, and some do not require this field at all.

Data Type

String

PaymentScheduleEndDate Property (RecurringBilling Component)

The end date of the subscription.

Syntax

__property String PaymentScheduleEndDate = { read=FPaymentScheduleEndDate, write=FSetPaymentScheduleEndDate };

Default Value

""

Remarks

The end date of the subscription.

The default format is "MM/dd/yyyy" and is controlled by DateFormat, or GetSubscriptionStatus.

This property is not available at design time.

Data Type

String

PaymentScheduleFrequency Property (RecurringBilling Component)

The frequency of payments.

Syntax

__property String PaymentScheduleFrequency = { read=FPaymentScheduleFrequency, write=FSetPaymentScheduleFrequency };

Default Value

""

Remarks

The frequency of payments.

Possible values are:

  • "None"
  • "Daily"
  • "Weekly"
  • "BiWeekly"
  • "FourWeeks"
  • "SemiMonthly"
  • "Monthly"
  • "BiMonthly"
  • "Quarterly"
  • "SemiAnnually"
  • "Annually"

Gateway specific values not covered by the above values may also be set. Please refer to RecurringBilling Gateway Setup and Required Properties for more information pertaining to gateway specific values.

If PaymentScheduleFrequencyUnit is applicable to the gateway, this property specifies the length of time between charges. This is used in combination with PaymentScheduleFrequencyUnit to specify the frequency of the billing. For instance if PaymentScheduleFrequencyUnit is set to "Days" and PaymentScheduleFrequency is set to "5", payments will occur every 5 days.

This property is not available at design time.

Data Type

String

PaymentScheduleFrequencyUnit Property (RecurringBilling Component)

The unit of time to be used when calculating the frequency of payments.

Syntax

__property String PaymentScheduleFrequencyUnit = { read=FPaymentScheduleFrequencyUnit, write=FSetPaymentScheduleFrequencyUnit };

Default Value

""

Remarks

The unit of time to be used when calculating the frequency of payments.

Possible values are:

  • "D" or "Days"
  • "M" or "Months"
  • "Y" or "Years"
Gateway specific values not covered by the above values may also be set. Please refer to RecurringBilling Gateway Setup and Required Properties for more information pertaining to gateway specific values.

This property is not available at design time.

Data Type

String

PaymentScheduleInitialAmount Property (RecurringBilling Component)

The initial amount to be charged (such as a trial period or setup fee).

Syntax

__property String PaymentScheduleInitialAmount = { read=FPaymentScheduleInitialAmount, write=FSetPaymentScheduleInitialAmount };

Default Value

""

Remarks

The initial amount to be charged (such as a trial period or setup fee). This amount can vary from PaymentScheduleRecurAmount.

This property is not available at design time.

Data Type

String

PaymentScheduleRecurAmount Property (RecurringBilling Component)

The amount to be charged on a recurring basis.

Syntax

__property String PaymentScheduleRecurAmount = { read=FPaymentScheduleRecurAmount, write=FSetPaymentScheduleRecurAmount };

Default Value

""

Remarks

The amount to be charged on a recurring basis. This amount can vary from PaymentScheduleInitialAmount.

This property is not available at design time.

Data Type

String

PaymentScheduleStartDate Property (RecurringBilling Component)

The date on which the recurring payments will start processing.

Syntax

__property String PaymentScheduleStartDate = { read=FPaymentScheduleStartDate, write=FSetPaymentScheduleStartDate };

Default Value

""

Remarks

The date on which the recurring payments will start processing.

This property specifies the start date. The default format is "MM/dd/yyyy" and is controlled by DateFormat, or GetSubscriptionStatus.

This property is not available at design time.

Data Type

String

PaymentScheduleTotalPayments Property (RecurringBilling Component)

The total number of payments.

Syntax

__property int PaymentScheduleTotalPayments = { read=FPaymentScheduleTotalPayments, write=FSetPaymentScheduleTotalPayments };

Default Value

0

Remarks

The total number of payments. Valid values differ between gateways. See RecurringBilling Gateway Setup and Required Properties for details.

This property is not available at design time.

Data Type

Integer

PaymentScheduleTrialPayments Property (RecurringBilling Component)

The total number of trial payments.

Syntax

__property int PaymentScheduleTrialPayments = { read=FPaymentScheduleTrialPayments, write=FSetPaymentScheduleTrialPayments };

Default Value

0

Remarks

The total number of trial payments.

This property is not available at design time.

Data Type

Integer

ProxyAuthScheme Property (RecurringBilling Component)

This property is used to tell the component which type of authorization to perform when connecting to the proxy.

Syntax

__property TibpRecurringBillingProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };
enum TibpRecurringBillingProxyAuthSchemes { authBasic=0, authDigest=1, authProprietary=2, authNone=3, authNtlm=4, authNegotiate=5 };

Default Value

authBasic

Remarks

This property is used to tell the component which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (RecurringBilling Component)

This property tells the component whether or not to automatically detect and use proxy system settings, if available.

Syntax

__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (RecurringBilling Component)

This property contains a password if authentication is to be used for the proxy.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (RecurringBilling Component)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (RecurringBilling Component)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (RecurringBilling Component)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

__property TibpRecurringBillingProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };
enum TibpRecurringBillingProxySSLs { psAutomatic=0, psAlways=1, psNever=2, psTunnel=3 };

Default Value

psAutomatic

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

psAutomatic (0)Default setting. If the URL is an https URL, the component will use the psTunnel option. If the URL is an http URL, the component will use the psNever option.
psAlways (1)The connection is always SSL enabled.
psNever (2)The connection is not SSL enabled.
psTunnel (3)The connection is made through a tunneling (HTTP) proxy.

Data Type

Integer

ProxyUser Property (RecurringBilling Component)

This property contains a user name, if authentication is to be used for the proxy.

Syntax

__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };

Default Value

""

Remarks

This property contains a user name, if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ResponseApprovalCode Property (RecurringBilling Component)

Contains an authorization code when a transaction has been approved.

Syntax

__property String ResponseApprovalCode = { read=FResponseApprovalCode };

Default Value

""

Remarks

Contains an authorization code when a transaction has been approved. This property contains an authorization code when a transaction has been approved. If the ResponseCode returned indicates that the transaction is not approved, then the contents of this property should be ignored.

This property is read-only and not available at design time.

Data Type

String

ResponseApproved Property (RecurringBilling Component)

Indicates the status of the last transaction.

Syntax

__property bool ResponseApproved = { read=FResponseApproved };

Default Value

false

Remarks

Indicates the status of the last transaction. This property will be True if the last transaction was approved. However, you should not rely solely on the value contained in this property. After every transaction, the ResponseCode should be inspected and evaluated according to the specifications of the Gateway in use. A list of response codes for each gateway is listed in the table of contents. However, it is recommended that the developer acquire the current list from the Gateway which is being used.

This property is read-only and not available at design time.

Data Type

Boolean

ResponseAVSResult Property (RecurringBilling Component)

Contains the Address Verification System result code.

Syntax

__property String ResponseAVSResult = { read=FResponseAVSResult };

Default Value

""

Remarks

Contains the Address Verification System result code. This one character property contains the Address Verification Service (AVS) result code. An AVS result code can provide additional information concerning the authentication of a particular transaction for which cardholder address verification was requested. An AVS result code of "0" will be returned in the response message when no address verification has been requested. The value returned should be stored for later retrieval, as it may be required when voiding or refunding a transaction. Valid AVS response codes are listed below, and are identical across all Gateway (note that some gateways do not return an AVS response).

ResponseAVSResultDescription
AAddress matches, Zip does not.
EAVS error.
GNon-U.S. issuing bank does not support AVS.
NNo match on Address or CustomerZip.
PAVS not applicable for this transaction.
RRetry - Issuer system unavailable.
SService not supported by issuer.
UAddress information is unavailable.
WNine digit Zip matches, Address does not.
XExact AVS match, nine digit Zip.
YExact AVS match, five digit Zip.
ZFive digit Zip matches, Address does not.

Note: Some gateways use their own response codes instead of those in the above table; those response codes are detailed below for such gateways.

Adyen

For Adyen, this property will contain the following possible values:

0Unknown
1Address matches, postal code doesn't
2Neither postal code nor address match
3AVS unavailable
4AVS not supported for this card type
5No AVS data provided
6Postal code matches, address doesn't match
7Both postal code and address match
8Address not checked, postal code unknown
9Address matches, postal code unknown
10Address doesn't match, postal code unknown
11Postal code not checked, address unknown
12Address matches, postal code not checked
13Address doesn't match, postal code not checked
14Postal code matches, address unknown
15Postal code matches, address not checked
16Postal code doesn't match, address unknown
17Postal code doesn't match, address not checked
18Neither postal code nor address were checked

American Payment Solutions

For American Payment Solutions, this property will contain the following possible values:

XExact match, 9-character numeric ZIP
Y, D, or MExact match, 5-character numeric ZIP
2 or 6Exact match, 5-character numeric ZIP, customer name
A or BAddress match only
3 or 7Address, customer name match only
W9-character numeric ZIP match only
Z, P, or L5-character ZIP match only
1 or 55-character ZIP, customer name match only
N or CNo address or ZIP match only
4 or 8No address or ZIP or customer name match only
UAddress unavailable
G or INon-U.S. issuer does not participate
RIssuer system unavailable
ENot a mail/phone order
SService not supported
0, O, or BAVS not available

Barclay

For Barclay, the property will contain the following possible values:

YYAddress and zip code or postal code match
YNAddress matches only
NYZip code or postal code matches
NNNeither address nor zip code or postal code matches; address is not parsable
UUAddress information is unavailable, service is unavailable, or Error; Unknown
BlankNo AVS performed

BlueSnap

For BlueSnap, the property will contain a 3-character string (if AVS checks were done), which contains the AVS checks for the following properties:

1st CharacterName AVS check
2nd CharacterAddress AVS check
3rd CharacterPostal/Zip Code AVS check

The possible values for each result character are:

MMatches
NDoes not match
UCould not be verified

HSBC

For HSBC, the property will contain the following possible values:

YYAddress and zip code or postal code match
YNAddress matches only
NYZip code or postal code matches
NNNeither address nor zip code or postal code matches; address is not parsable
UUAddress information is unavailable, service is unavailable, or Error; Unknown
FFIssuer does not participate in AVS
BlankNo AVS performed

PayTrace / PayTraceJSON

For PayTrace / PayTraceJSON, the property will contain the following possible values:

Full Exact Match
Address Match Only
Zip Match Only
No Match
Address Unavailable
Non-US Issuer does not participate
Issuer System Unavailable
Not a Mail/Phone Order
Service Not Supported

QBMS

For the QBMS gateway, the ResponseAVSResult property will contain the result for the street address, a comma, and then the result for the zip code. The values returned are "Pass", "Fail", and "NotAvailable". Therefore, an ResponseAVSResult of "Fail,Pass" means that the street address failed validation, but the zip code passed.

DataCash

For DataCash, the property will contain the following possible values (of which correspond to both AVS and CVV checks):

NO DATA MATCHES
ADDRESS MATCH ONLY
SECURITY CODE MATCH ONLY
ALL MATCH
DATA NOT CHECKED

Stripe

For Stripe, the property will contain the following possible values:

Pass The first address line or zip code provided is correct.
Fail The first address line or zip code provided is incorrect.
Unavailable The customer's bank did not check the first address line or zip code provided.
Unchecked The first address line or zip code was provided but has not yet been checked.

Worldpay

For Worldpay, the property will contain a 4-character string, which contains the AVS checks for the following properties:

1st CharacterCard Verification Value (CVV) check
2nd CharacterPostal/Zip Code AVS check
3rd CharacterAddress AVS check
4th CharacterCountry Comparison check

The possible values for each result character are:

0Not Supported.
1Not Checked.
2Matched.
4No Match.
8Partial Match.

Worldpay Online

For Worldpay Online, the property will contain one of the following:

ValueDescription
APPROVED The supplied street and postal code details fully matched the payment provider's records
PARTIAL APPROVED One of the supplied street or postal code details did not match the payment provider's records
NOT SENT TO ACQUIRER Problem with acquirer - possibly no AVS support
NO RESPONSE FROM ACQUIRERProblem with acquirer - possibly no AVS support
NOT CHECKED BY ACQUIRER The acquirer did not check the address details
NOT SUPPLIED BY SHOPPER Missing, incomplete or invalid address details in the order prevented the address from being checked
FAILED Both street and postal code details did not match the payment provider's records

This property is read-only and not available at design time.

Data Type

String

ResponseCode Property (RecurringBilling Component)

Indicates the status of the authorization request.

Syntax

__property String ResponseCode = { read=FResponseCode };

Default Value

""

Remarks

Indicates the status of the authorization request. This property contains the actual response code as returned by the Gateway. Unlike the ResponseApproved property, this ResponseCode property may provide more details about why a transaction was declined. Therefore, it is recommended that developers check the ResponseCode as well as the ResponseApproved property. The Point of Sale system should evaluate this response code and NOT the ResponseText to determine nature of a response message. The current (at the time of this release) response codes for the supported Gateways are listed in the table of contents to your left.

This property is read-only and not available at design time.

Data Type

String

ResponseCVVResult Property (RecurringBilling Component)

Contains the returned CVV2 result code if it was requested.

Syntax

__property String ResponseCVVResult = { read=FResponseCVVResult };

Default Value

""

Remarks

Contains the returned CVV2 result code if it was requested. This property contains the host returned CVV2 result code (if CVV data was sent in the request). The following is a list of current result codes:

MCVV2 Match.
NCVV2 No Match.
PNot Processed.
SMerchant has indicated that CVV2 is not present on card.
UIssuer not certified and/or has not provided Visa encryption keys.

A gateway may also support custom codes or human-readable response messages in this property. Please consult your gateway documentation to determine if CVV2 codes are supported.

Note: Some gateways use their own response codes instead of those in the above table; those response codes are detailed below for such gateways.

HSBC

For HSBC, the property will contain:

0Card type does not support CVM
1CVM match
2CVM did not match issuer value
3CVM was not processed
4CVM should be on the card but cardholder indicated otherwise
5CVM not supported by issuer
6Not valid
7No response from server

Adyen

For Adyen, the property will contain:

0Unknown
1Matches
2Does not match
3Not checked
4No CVC/CVV provided, but was required
5Issuer not certified for CVC/CVV
6No CVC/CVV provided

Barclay

For Barclay, the property will contain:

0,1CVM was not processed
2CVM match
4CVM does not match issuer value
UnknownCVM invalid or missing
BlankNo response from server

BlueSnap

For BlueSnap, the property will contain:

MAMatch
NCIssuer is not certified for CVV2/CVC2/CID
NDCheck was not done
NMNo match
NPCVV2/CVC2/CID should be on the card but is not present
NRCVV check not requested

(Note: There are some scenarios in which the property will be empty instead, refer to BlueSnap's documentation for more details.)

DataCash

For DataCash, the property will contain the following possible values (of which correspond to both AVS and CVV checks):

NO DATA MATCHES
ADDRESS MATCH ONLY
SECURITY CODE MATCH ONLY
ALL MATCH
DATA NOT CHECKED

Stripe

For Stripe, the property will contain the following possible values:

Pass The CVC provided is correct.
Fail The CVC provided is incorrect.
Unavailable The customer's bank did not check the CVC provided.
Unchecked The CVC was provided but has not yet been checked.

Worldpay Online

For Worldpay Online, the property will contain one of the following:

ValueDescription
APPROVED The supplied CVC details matched the payment provider's records
NOT SENT TO ACQUIRER Problem with acquirer - possibly no CVC support
NO RESPONSE FROM ACQUIRERProblem with acquirer - possibly no CVC support
NOT CHECKED BY ACQUIRER The acquirer did not check the CVC details
NOT SUPPLIED BY SHOPPER Missing, or invalid CVC in the payment details prevented the CVC from being checked
FAILED The supplied CVC did not match the payment provider's records

This property is read-only and not available at design time.

Data Type

String

ResponseData Property (RecurringBilling Component)

The entire response returned from the gateway processor.

Syntax

__property String ResponseData = { read=FResponseData };

Default Value

""

Remarks

The entire response returned from the gateway processor. This property contains the entire response returned from the gateway processor. You may use this to parse additional information that is not returned in the standard response properties.

This property is read-only and not available at design time.

Data Type

String

ResponseErrorCode Property (RecurringBilling Component)

Additional error code returned by some gateways.

Syntax

__property String ResponseErrorCode = { read=FResponseErrorCode };

Default Value

""

Remarks

Additional error code returned by some gateways. If a gateway returns it, this property will contain an additional code that may explain why the transaction was declined. You may also wish to inspect ResponseErrorText for a human-readable description of this ResponseErrorCode.

This property is read-only and not available at design time.

Data Type

String

ResponseErrorText Property (RecurringBilling Component)

Additional error description returned by some gateways.

Syntax

__property String ResponseErrorText = { read=FResponseErrorText };

Default Value

""

Remarks

Additional error description returned by some gateways. If a gateway returns it, this property will contain a human-readable description of the error which occurred (if any). You may also wish to inspect ResponseErrorCode for an accompanying code which may be parsed and used by your application.

This property is read-only and not available at design time.

Data Type

String

ResponseInvoiceNumber Property (RecurringBilling Component)

Invoice number submitted in authorization request (if applicable).

Syntax

__property String ResponseInvoiceNumber = { read=FResponseInvoiceNumber };

Default Value

""

Remarks

Invoice number submitted in authorization request (if applicable). This property contains the Invoice Number submitted in the original transaction, echoed back by the Gateway host.

This property is read-only and not available at design time.

Data Type

String

ResponseProcessorCode Property (RecurringBilling Component)

Response code from the underlying processor.

Syntax

__property String ResponseProcessorCode = { read=FResponseProcessorCode };

Default Value

""

Remarks

Response code from the underlying processor. Often times a Gateway will return a ResponseCode that indicates only whether the transaction is approved or declined. Many of these also include a secondary code that provides more details as to why the transaction was declined.

Note, for the PayFlowPro Gateway this property will contain a "1" if the transaction was a duplicate, a "-1" if duplicate checking service is unavailable, and will be blank for a successfully authorized transaction.

This property is read-only and not available at design time.

Data Type

String

ResponseSubscriptionId Property (RecurringBilling Component)

Contains the Subscription or Profile Identifier for the recurring payment.

Syntax

__property String ResponseSubscriptionId = { read=FResponseSubscriptionId };

Default Value

""

Remarks

Contains the Subscription or Profile Identifier for the recurring payment. This property contains a subscription identifier or profile number used to reference a recurring payment. This property is used when performing subsequent actions on a recurring payment.

This property is read-only and not available at design time.

Data Type

String

ResponseText Property (RecurringBilling Component)

Text information that describes each response code.

Syntax

__property String ResponseText = { read=FResponseText };

Default Value

""

Remarks

Text information that describes each response code. This property contains a response or display text message. This message can be used by the terminal to display the authorization result. The display text must not be used to determine the nature of a response message. A Gateway may translate the response according to the language indicated in the merchant account setup (if applicable).

This property is read-only and not available at design time.

Data Type

String

ResponseTransactionId Property (RecurringBilling Component)

Contains the Visa Transaction Identifier or MasterCard Reference Number.

Syntax

__property String ResponseTransactionId = { read=FResponseTransactionId };

Default Value

""

Remarks

Contains the Visa Transaction Identifier or MasterCard Reference Number. This property contains a transaction identifier or reference number. The Point of Sale (POS) device should not attempt to interpret the meaning of any data appearing in this property. Data returned in this property (if any) should be recorded and used to submit a modification of this transaction at a later time (such as voiding the transaction or capturing an authorization-only transaction, if applicable).

This property is read-only and not available at design time.

Data Type

String

ShippingAddress Property (RecurringBilling Component)

Customer's shipping street address.

Syntax

__property String ShippingAddress = { read=FShippingAddress, write=FSetShippingAddress };

Default Value

""

Remarks

Customer's shipping street address.

This property is not available at design time.

Data Type

String

ShippingAddress2 Property (RecurringBilling Component)

A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.

Syntax

__property String ShippingAddress2 = { read=FShippingAddress2, write=FSetShippingAddress2 };

Default Value

""

Remarks

A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.).

This property is not available at design time.

Data Type

String

ShippingCity Property (RecurringBilling Component)

Customer's shipping city.

Syntax

__property String ShippingCity = { read=FShippingCity, write=FSetShippingCity };

Default Value

""

Remarks

Customer's shipping city.

This property is not available at design time.

Data Type

String

ShippingCountry Property (RecurringBilling Component)

Customer's shipping country.

Syntax

__property String ShippingCountry = { read=FShippingCountry, write=FSetShippingCountry };

Default Value

""

Remarks

Customer's shipping country. This property contains the country in which the customer is located. Most gateways use a two-letter country code, specified in ISO-3166.

This property is not available at design time.

Data Type

String

ShippingEmail Property (RecurringBilling Component)

Customer's email address.

Syntax

__property String ShippingEmail = { read=FShippingEmail, write=FSetShippingEmail };

Default Value

""

Remarks

Customer's email address.

This property is not available at design time.

Data Type

String

ShippingFirstName Property (RecurringBilling Component)

Customer's first name.

Syntax

__property String ShippingFirstName = { read=FShippingFirstName, write=FSetShippingFirstName };

Default Value

""

Remarks

Customer's first name.

This property is not available at design time.

Data Type

String

ShippingLastName Property (RecurringBilling Component)

Customer's last name.

Syntax

__property String ShippingLastName = { read=FShippingLastName, write=FSetShippingLastName };

Default Value

""

Remarks

Customer's last name.

This property is not available at design time.

Data Type

String

ShippingPhone Property (RecurringBilling Component)

Customer's phone number.

Syntax

__property String ShippingPhone = { read=FShippingPhone, write=FSetShippingPhone };

Default Value

""

Remarks

Customer's phone number.

This property is not available at design time.

Data Type

String

ShippingState Property (RecurringBilling Component)

Customer's shipping state.

Syntax

__property String ShippingState = { read=FShippingState, write=FSetShippingState };

Default Value

""

Remarks

Customer's shipping state.

This property is not available at design time.

Data Type

String

ShippingZip Property (RecurringBilling Component)

Customer's shipping zip code (or postal code if outside of the USA).

Syntax

__property String ShippingZip = { read=FShippingZip, write=FSetShippingZip };

Default Value

""

Remarks

Customer's shipping zip code (or postal code if outside of the USA).

This property is not available at design time.

Data Type

String

SpecialFieldCount Property (RecurringBilling Component)

The number of records in the SpecialField arrays.

Syntax

__property int SpecialFieldCount = { read=FSpecialFieldCount, write=FSetSpecialFieldCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SpecialFieldCount - 1.

This property is not available at design time.

Data Type

Integer

SpecialFieldName Property (RecurringBilling Component)

Name of special configuration property to submit in this transaction.

Syntax

__property String SpecialFieldName[int FieldIndex] = { read=FSpecialFieldName, write=FSetSpecialFieldName };

Default Value

""

Remarks

Name of special configuration field to submit in this transaction. The SpecialFieldName and SpecialFieldValue properties can be used to send special gateway configuration and transaction properties for each transaction. These properties can also be used to extend the functionality of this component by submitting additional information to the gateway.

This property is not applicable for the LinkPoint, FirstData, YourPay, PayFuse, or Orbital gateways.

The FieldIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SpecialFieldCount property.

This property is not available at design time.

Data Type

String

SpecialFieldValue Property (RecurringBilling Component)

Value of special configuration property to submit in this transaction.

Syntax

__property String SpecialFieldValue[int FieldIndex] = { read=FSpecialFieldValue, write=FSetSpecialFieldValue };

Default Value

""

Remarks

Value of special configuration field to submit in this transaction. The SpecialFieldName and SpecialFieldValue properties can be used to send special gateway configuration and transaction properties for each transaction. These properties can also be used to extend the functionality of this component by submitting additional information to the gateway.

Note: This property is not applicable for the LinkPoint, FirstData, YourPay, PayFuse, or Orbital gateways.

The FieldIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SpecialFieldCount property.

This property is not available at design time.

Data Type

String

SSLAcceptServerCertEncoded Property (RecurringBilling Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEncoded Property (RecurringBilling Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (RecurringBilling Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (RecurringBilling Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (RecurringBilling Component)

This is the type of certificate store for this certificate.

Syntax

__property TibpRecurringBillingSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };
enum TibpRecurringBillingSSLCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS11 interface.

To use a security key the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN.

Code Example: SSH Authentication with Security Key certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSLCertSubject Property (RecurringBilling Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properites are set. When this property is set, a search is performed in the current certificate store certificate with matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

FieldMeaning
CNCommon Name. This is commonly a host name like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma it must be quoted.

Data Type

String

SSLProvider Property (RecurringBilling Component)

This specifies the SSL/TLS implementation to use.

Syntax

__property TibpRecurringBillingSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };
enum TibpRecurringBillingSSLProviders { sslpAutomatic=0, sslpPlatform=1, sslpInternal=2 };

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (RecurringBilling Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

SubscriptionDesc Property (RecurringBilling Component)

Description of recurring subscription.

Syntax

__property String SubscriptionDesc = { read=FSubscriptionDesc, write=FSetSubscriptionDesc };

Default Value

""

Remarks

This field contains a description of the recurring subscription. Please see the RecurringBilling Gateway Setup and Required Properties page to determine if this is a required or optional field for the gateway you are using.

Data Type

String

SubscriptionDetailsCardExpMonth Property (RecurringBilling Component)

The expiration month of the card currently being processed for the recurring payments.

Syntax

__property int SubscriptionDetailsCardExpMonth = { read=FSubscriptionDetailsCardExpMonth };

Default Value

0

Remarks

The expiration month of the card currently being processed for the recurring payments.

This property is read-only and not available at design time.

Data Type

Integer

SubscriptionDetailsCardExpYear Property (RecurringBilling Component)

The expiration year of the card currently being processed for the recurring payments.

Syntax

__property int SubscriptionDetailsCardExpYear = { read=FSubscriptionDetailsCardExpYear };

Default Value

0

Remarks

The expiration year of the card currently being processed for the recurring payments.

This property is read-only and not available at design time.

Data Type

Integer

SubscriptionDetailsCardNumber Property (RecurringBilling Component)

The card number currently being processed for the recurring payments.

Syntax

__property String SubscriptionDetailsCardNumber = { read=FSubscriptionDetailsCardNumber };

Default Value

""

Remarks

The card number currently being processed for the recurring payments.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsEndDate Property (RecurringBilling Component)

The date in which the recurring payments will stop processing.

Syntax

__property String SubscriptionDetailsEndDate = { read=FSubscriptionDetailsEndDate };

Default Value

""

Remarks

The date in which the recurring payments will stop processing.

The date is returned in the format specified within the DateFormat config.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsFrequency Property (RecurringBilling Component)

The frequency in which payments will occur.

Syntax

__property String SubscriptionDetailsFrequency = { read=FSubscriptionDetailsFrequency };

Default Value

""

Remarks

The frequency in which payments will occur.

If SubscriptionDetailsFrequencyUnit is applicable, this property will contain the length of the corresponding SubscriptionDetailsFrequencyUnit in which payments will occur.

This component uses pre-defined Frequency values which are listed below. If a gateway returns any value not contained within the pre-defined list, the raw value will be returned.

  • None
  • Daily
  • Weekly
  • BiWeekly
  • FourWeeks
  • SemiMonthly
  • Monthly
  • BiMonthly
  • Quarterly
  • SemiAnnually
  • Annually

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsFrequencyUnit Property (RecurringBilling Component)

The unit frequency in which the payments will be processed.

Syntax

__property String SubscriptionDetailsFrequencyUnit = { read=FSubscriptionDetailsFrequencyUnit };

Default Value

""

Remarks

The unit frequency in which the payments will be processed.

This component uses pre-defined FrequencyUnit values which are listed below. If a gateway returns any value not contained within the pre-defined list, the raw value will be returned.

  • Days
  • Weeks
  • Months
  • Years

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsLastPaymentDate Property (RecurringBilling Component)

The date that the last/previous transaction was processed.

Syntax

__property String SubscriptionDetailsLastPaymentDate = { read=FSubscriptionDetailsLastPaymentDate };

Default Value

""

Remarks

The date that the last/previous transaction was processed.

The date is returned in the format specified within the DateFormat config.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsNextPaymentDate Property (RecurringBilling Component)

The date of the next upcoming transaction.

Syntax

__property String SubscriptionDetailsNextPaymentDate = { read=FSubscriptionDetailsNextPaymentDate };

Default Value

""

Remarks

The date of the next upcoming transaction.

The date is returned in the format specified within the DateFormat config.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsRecurAmount Property (RecurringBilling Component)

The amount being charged on a recurring basis.

Syntax

__property String SubscriptionDetailsRecurAmount = { read=FSubscriptionDetailsRecurAmount };

Default Value

""

Remarks

The amount being charged on a recurring basis.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsRemainingPayments Property (RecurringBilling Component)

The total number of remaining payments until the recurring payments will stop processing.

Syntax

__property int SubscriptionDetailsRemainingPayments = { read=FSubscriptionDetailsRemainingPayments };

Default Value

0

Remarks

The total number of remaining payments until the recurring payments will stop processing.

This property is read-only and not available at design time.

Data Type

Integer

SubscriptionDetailsStartDate Property (RecurringBilling Component)

The date in which the recurring payments started processing.

Syntax

__property String SubscriptionDetailsStartDate = { read=FSubscriptionDetailsStartDate };

Default Value

""

Remarks

The date in which the recurring payments started processing.

The date is returned in the format specified within the DateFormat config.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsStatus Property (RecurringBilling Component)

The current status of the recurring subscription.

Syntax

__property String SubscriptionDetailsStatus = { read=FSubscriptionDetailsStatus };

Default Value

""

Remarks

The current status of the recurring subscription.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsSubscriptionId Property (RecurringBilling Component)

Contains the Subscription or Profile Identifier for the recurring payment.

Syntax

__property String SubscriptionDetailsSubscriptionId = { read=FSubscriptionDetailsSubscriptionId };

Default Value

""

Remarks

Contains the Subscription or Profile Identifier for the recurring payment.

This property contains a subscription identifier or profile number used to reference a recurring payment.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsSubscriptionName Property (RecurringBilling Component)

Contains the name of the recurring subscription or profile.

Syntax

__property String SubscriptionDetailsSubscriptionName = { read=FSubscriptionDetailsSubscriptionName };

Default Value

""

Remarks

Contains the name of the recurring subscription or profile.

This property is read-only and not available at design time.

Data Type

String

SubscriptionDetailsTotalPayments Property (RecurringBilling Component)

The total number of payments.

Syntax

__property int SubscriptionDetailsTotalPayments = { read=FSubscriptionDetailsTotalPayments };

Default Value

0

Remarks

The total number of payments.

This property is read-only and not available at design time.

Data Type

Integer

SubscriptionName Property (RecurringBilling Component)

The name of the recurring subscription or profile.

Syntax

__property String SubscriptionName = { read=FSubscriptionName, write=FSetSubscriptionName };

Default Value

""

Remarks

This field contains the name of the recurring subscription or profile. Please see the RecurringBilling Gateway Setup and Required Properties page to determine if this is a required or optional field for the gateway you are using.

Data Type

String

TestMode Property (RecurringBilling Component)

Turns test mode on and off for transactions sent to the current Gateway .

Syntax

__property bool TestMode = { read=FTestMode, write=FSetTestMode };

Default Value

false

Remarks

You can use this property to set a test mode flag that will be sent in an authorization request. Not all Gateways support test modes. If you set the TestMode property to True and the current Gateway does not support it, the component will raises an exception.

Data Type

Boolean

Timeout Property (RecurringBilling Component)

A timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

30

Remarks

If Timeout is set to a positive value, and an operation cannot be completed immediately, the component will retry the operation for a maximum of Timeout seconds.

The default value for Timeout is 30 (seconds).

Data Type

Integer

TransactionId Property (RecurringBilling Component)

Merchant-generated transaction Id used for all transactions.

Syntax

__property String TransactionId = { read=FTransactionId, write=FSetTransactionId };

Default Value

""

Remarks

This property is used to send a merchant-generated transaction id to the Gateway, if the gateway supports that feature.

Data Type

String

AddSpecialField Method (RecurringBilling Component)

Adds a special field name and the corresponding value.

Syntax

void __fastcall AddSpecialField(String Name, String Value);

Remarks

Please refer to the SpecialFieldName and SpecialFieldValue properties for more information on form variables and how they are managed.

CancelSubscription Method (RecurringBilling Component)

Cancels or deletes a recurring payment subscription.

Syntax

void __fastcall CancelSubscription(String SubscriptionId);

Remarks

This method is used to cancel or delete a recurring subscription identified by the specified SubscriptionId.

Config Method (RecurringBilling Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateSubscription Method (RecurringBilling Component)

Creates a new recurring subscription.

Syntax

void __fastcall CreateSubscription();

Remarks

This method is used to create a recurring subscription based upon the payment details entered via PaymentSchedule.

DoEvents Method (RecurringBilling Component)

Processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

GetResponseVar Method (RecurringBilling Component)

Parses additional information out of the response.

Syntax

String __fastcall GetResponseVar(String Name);

Remarks

Due to the fact that this component supports so many gateways, only the most commonly used response variables are parsed into the Response properties. Any additional response information contained within the ResponseData may be retrieved with this GetResponseVar method. There are three formats for the ResponseData returned by the gateways this component supports: Name/value pairs, delimited list, or XML. The value you pass in the Name parameter changes based on these formats, as detailed below:

If the ResponseData property contains name/value pairs, pass the name in the Name parameter and this method will return the value. For instance, if ResponseData contains "ResponseCode=00&FraudScore=53&ApprovalCode=123456&...", calling GetResponseVar("FraudScore") will return "53".

However, if ResponseData contains a delimited list, pass the index of the field you wish to receive. For instance, if ResponseData contains "00|53|123456|...", calling GetResponseVar("1") will return "53".

Finally, if ResponseData contains XML, pass the xpath to the value you wish to receive. For instance, if ResponseData contains "<Response><Code>00</Code><FraudScore>53</FraudScore><ApprovalCode>123456</ApprovalCode></Response>", calling GetResponseVar("/Response/FraudScore") will return "53".

GetSubscriptionStatus Method (RecurringBilling Component)

Retrieves the status of a recurring payment subscription.

Syntax

void __fastcall GetSubscriptionStatus(String SubscriptionId);

Remarks

This method retrieves the current status of the recurring payment subscription specified via SubscriptionId. SubscriptionDetails will be populated with the details about the subscription.

Interrupt Method (RecurringBilling Component)

Interrupts the current action.

Syntax

void __fastcall Interrupt();

Remarks

This method interrupts any processing that the component is currently executing.

ResetSpecialFields Method (RecurringBilling Component)

Resets all special fields to the default settings.

Syntax

void __fastcall ResetSpecialFields();

Remarks

This function resets all special gateway configuration fields to the default settings for the specified Gateway.

Please refer to the SpecialFieldName and SpecialFieldValue properties for more information on form variables and how they are managed.

UpdateSubscription Method (RecurringBilling Component)

Updates a recurring payment subscription.

Syntax

void __fastcall UpdateSubscription(String SubscriptionId);

Remarks

This method is used to update a recurring subscription, specified by SubscriptionId. Specify new values via PaymentSchedule before calling this method.

Error Event (RecurringBilling Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TibpRecurringBillingErrorEventParams;
typedef void __fastcall (__closure *TibpRecurringBillingErrorEvent)(System::TObject* Sender, TibpRecurringBillingErrorEventParams *e);
__property TibpRecurringBillingErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (RecurringBilling Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TibpRecurringBillingSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TibpRecurringBillingSSLServerAuthenticationEvent)(System::TObject* Sender, TibpRecurringBillingSSLServerAuthenticationEventParams *e);
__property TibpRecurringBillingSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (RecurringBilling Component)

Shows the progress of the secure connection.

Syntax

typedef struct {
  String Message;
} TibpRecurringBillingSSLStatusEventParams;
typedef void __fastcall (__closure *TibpRecurringBillingSSLStatusEvent)(System::TObject* Sender, TibpRecurringBillingSSLStatusEventParams *e);
__property TibpRecurringBillingSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Config Settings (RecurringBilling Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

RecurringBilling Config Settings

3DSECI:   Electronic Commerce Indicator.

This contains a 1-character transaction indicator identifying the type of transaction being authorized. Supported values vary between gateways, so please consult gateway documentation for more information. Note: Other values necessary for passing 3D Secure data are 3DSXID and 3DSCAVV. This setting is only valid for E-Commerce transactions.

AmountFormat:   Used to set the input format for TransactionAmount.

This configuration setting can be used to specify a single input format for the PaymentScheduleInitialAmount and PaymentScheduleRecurAmount. When set to a value other than 0, the component will automatically convert the amount from the specified format to the format expected by the gateway. Valid values are:

Value Format
0 Unspecified (default)
1 Dollars (1.00)
2 Cents (100)

Note that this setting is only designed for use with currencies that have two digits after the decimal point, like US dollars.

AuthNetCIMGuestProfile:   Specifies whether a profile is a guest profile or a normal profile.

If this configuration setting is set to True when creating a customer profile (default False), the profile will be created as a guest profile. A guest profile will be deleted automatically after 90 days of inactivity. This setting can also be checked after getting the status of a customer profile to tell if it is a guest profile.

AuthNetCIMMaskedCardNumber:   The masked card number returned for the payment profile at the specified index.

This config holds the masked card number that is stored in the payment profile selected by AuthNetCIMPaymentProfileIndex.

When updating a payment profile, this masked card number will be re-submitted if real card information is not specified, which prevents Authorize.Net from changing the card information on file. This makes it possible to update just the billing information associated with a payment profile without affecting the stored card information. This configuration setting can also be used when updating a subscription with the Authorize.NET gateway.

AuthNetCIMPaymentProfileCount:   The number of Payment Profiles assigned to a customer profile within the Authorize.NET CIM gateway.

This config is populated after a GetSubscriptionStatus call for a Profile (AuthNetCIMRequestType set to '0') and contains the total number of Payment Profiles assigned to the specified customer profile. This is to be used in conjunction with AuthNetCIMPaymentProfileIndex.

AuthNetCIMPaymentProfileId:   The Payment Profile ID assigned by Authorize.NET CIM gateway.

This config is used to retrieve or set the ID of a Payment Profile. This config will be populated after a Payment Profile is created or when one is retrieved (via a GetSubscriptionStatus call). Additionally when AuthNetCIMRequestType is set to '1' (Payment Profile), the Payment Profile ID must be set, via this config, when performing the following operations: UpdateSubscription, CancelSubscription, or GetSubscriptionStatus.

AuthNetCIMPaymentProfileIndex:   Parses the Payment Profile contained at the specified index within a GetSusbcriptionStatus response.

This is an actionable config that parses the Payment Profile contained within the response at the specified index. This is a 1-based index and is to be used in conjunction with AuthNetCIMPaymentProfileCount. Index values less than 1 and greater than AuthNetCIMPaymentProfileCount will cause an exception to be thrown. When this config is set, the Payment Profile at the specified index will be parsed and the Card, ECheckBank, and Customer properties will be populated based on the data in the response.

AuthNetCIMRequestType:   The request type to send for the Authorize.NET CIM gateway.

This config is used to specify the request type to send for the Authorize.NET CIM gateway and is used in conjunction with the API methods to perform various actions.

The available request types are:

Value Description
0 (default) Profile - Used to perform a profile activity
1 Payment Profile - Used to perform a payment profile activity (card/bank and billing info) which is linked to a profile.
2 Shipping Address - Used to perform a shipping address activity which is linked to a profile.

AuthNetCIMShippingAddressCount:   The number of Shipping Addresses assigned to a customer profile within the Authorize.NET CIM gateway.

This config is populated after a GetSubscriptionStatus call for a Profile (AuthNetCIMRequestType set to '0') and contains the total number of Shipping Addresses assigned to the specified customer profile. This is to be used in conjunction with AuthNetCIMShippingAddressIndex.

AuthNetCIMShippingAddressId:   The Shipping Address ID assigned by Authorize.NET CIM gateway.

This config is used to retrieve or set the ID of a Shipping Address. This config will be populated after a Shipping Address is created or when one is retrieved (via a GetSubscriptionStatus call). Additionally when AuthNetCIMRequestType is set to '2' (Shipping Address), the Shipping Address ID must be set, via this config, when performing the following operations: UpdateSubscription, CancelSubscription, or GetSubscriptionStatus.

AuthNetCIMShippingAddressIndex:   Parses the Shipping Address contained at the specified index within a GetSusbcriptionStatus response.

This is an actionable config that parses the Shipping Address contained within the response at the specified index. This is a 1-based index and is to be used in conjunction with AuthNetCIMShippingAddressCount. Index values less than 1 and greater than AuthNetCIMShippingAddressCount will cause an exception to be thrown. When this config is set, the Shipping Address at the specified index will be parsed and the ShippingInfo properties will be populated based on the data in the response.

AuthNetGetSubscriptionDetails:   Specifies whether a call to GetSubscriptionStatus will return the details of the subscription or just the status.

When getting the status of a subscription in the Authorize.Net gateway, if this configuration setting is set to "False" (default) GetSubScriptionStatus will only return the Status of the subscription in SubscriptionDetails. When set to "True", calling GetSubscriptionStatus will return more details about the subscription and populate other fields in SubscriptionDetails, as well as AuthNetCIMMaskedCardNumber, AuthNetCIMPaymentProfileId, AuthNetShipToCompany, and AuthNetCIMShippingAddressId.

AuthNetOpaqueDescriptor:   An Authorize.Net opaque data descriptor.

This setting can be set to an Authorize.Net opaque data descriptor in order to use it in place of explicit card or bank account information. AuthNetOpaqueValue must also be set.

This setting is only valid with the gwAuthorizeNetXML and gwAuthorizeNetCIM gateways, it cannot be used with the gwAuthorizeNet gateway.

AuthNetOpaqueValue:   An Authorize.Net opaque data value.

This setting can be set to an Authorize.Net opaque data value in order to use it in place of explicit card or bank account information. AuthNetOpaqueDescriptor must also be set.

This setting is only valid with the gwAuthorizeNetXML and gwAuthorizeNetCIM gateways, it cannot be used with the gwAuthorizeNet gateway.

AuthNetShipToCompany:   The name of the company associated with the customer's shipping address.

This configuration setting can be used to set the company associated with the shipping address of the customer.

BamboraUsername:   The Username used for authentication with the Bambora gateway.

This config is used to specify the 'username' value to authenticate with the Bambora gateway and is only applicable when calling CreateSubscription.

BASYSCardInfoKey:   BASYS Gateway Credit Card Info Key.

This configuration setting is populated at the time the payment method is added to the system by calling CreateSubscription and setting BASYSRequestType configuration setting to 1. This configuration setting must be set when BASYSRequestType configuration setting is set to 1 and when calling UpdateSubscription, and CancelSubscription.

BASYSCheckInfoKey:   BASYS Gateway Check Info Key.

This configuration setting is populated at the time the payment method is added to the system by calling CreateSubscription and setting BASYSRequestType configuration setting to 2. This configuration setting must be set when BASYSRequestType configuration setting is set to 2 and when calling UpdateSubscription, and CancelSubscription.

BASYSContractID:   BASYS Gateway Contract ID.

Unique identifier assigned to the contract by the merchant at the time the payment schedule is created. This configuration setting must be set when BASYSRequestType configuration setting is set to 3 and when calling CreateSubscription.

BASYSContractKey:   BASYS Gateway Contract Key.

This configuration setting is populated at the time the payment schedule is added to the system by calling CreateSubscription and setting BASYSRequestType configuration setting to 3. This configuration setting must be set when BASYSRequestType configuration setting is set to 3 and when calling UpdateSubscription, and CancelSubscription.

BASYSCustomerKey:   BASYS Gateway Customer Key.

This configuration setting is populated at the time the customer profile is created by calling CreateSubscription and setting BASYSRequestType configuration setting to 0. This configuration setting must be set when the BASYSRequestType configuration setting is set to 1, 2, 3, 4 and 5 and when calling UpdateSubscription, and CancelSubscription.

BASYSCustomerStatus:   Indicates the Customer Status.

Customer status at the time the customer profile is created and BASYSRequestType is set to 0 (Default).

Possible values are:

Value Description
0 Active
1 Inactive
2 Pending
3 Clsoed

The default value is 0 (Active).

BASYSNextBillingDate:   BASYS Gateway Next Billing Date.

Identifies the next time the contract will come due in MM/DD/YYYY format. This configuration setting must be set when BASYSRequestType configuration setting is set to 3 and when calling CreateSubscription, and UpdateSubscription.

Note: If only the billing date is to be updated, it is better to set the BASYSRequestType configuration setting to 4 and set the BASYSNumberOfDays configuration setting to the number of days to be added to the billing date.

BASYSNumberOfDays:   Number of days to be added to the next billing date.

This configuration setting must be set to the number of days to be added to the next billing date when BASYSRequestType configuration setting is set to 4 and when calling and UpdateSubscription. BASYSContractKey must also be set to the corresponding contract key.

BASYSPaymentType:   Indicates the Payment Type.

When BASYSRequestType is set to 3 (Recurring Payment) a payment type must be set to one of the following values.

Possible values are:

Value Description
0 Credit Card
1 Check/ACH

The default value is 0 (Credit Card).

BASYSRequestType:   The request type for the BASYS gateway.

This configuration setting is used to specify the request type for the BASYS gateway.

See RecurringBilling Gateway Setup and Required Properties for details.

Possible values are:

Value Description
0 Customer Profile: Used to create a customer profile. This is the first step towards successfully storing and initiating recurring payments.
1 Credit Card Info: Used to to store a credit card number. The Customer Key must be specified via BASYSCustomerKey configuration setting.
2 Check Info: Used to store a checking account number. The Customer Key must be specified via BASYSCustomerKey configuration setting.
3 Recurring Payment: Used to create a payment schedule. The Customer Key must be specified via BASYSCustomerKey configuration setting.
4 Next Bill Date: Used to update the next billing date in the event that a payment was declined and a contract suspended. The Customer Key and Contract Key must be specified via BASYSCustomerKey, and BASYSContractKey configuration settings.
5 Get Token: Used to generate a Token based on the Credit Card information. The Customer Key must be specified via BASYSCustomerKey configuration setting.

The default value is 0 (Customer Profile).

BASYSToken:   BASYS Gateway Token Value.

This configuration setting is populated at the time the Token is created by calling CreateSubscription and setting BASYSRequestType configuration setting to 5.

BASYSTokenMode:   Indicates the Token Type.

When BASYSRequestType is set to 5 (Get Token) a token type must be set to one of the following values.

Possible values are:

Value Description
0 Default (BASYS Gateway Default Format).
1 Card Format.

The default value is 0 (Gateway Format).

BlueSnapCardCount:   How many card payment sources the last retrieved vaulted shopper has.

When BlueSnapRequestType is set to 2, this setting can be queried to determine how many card payment sources the last retrieved vaulted shopper profile has.

Important: Be sure to call GetSubscriptionStatus after setting BlueSnapRequestType (or after calling UpdateSubscription with it already set) in order to ensure that you have retrieved the most recent data!

BlueSnapCardIndex:   Determines which card payment source the component's fields are populated for currently.

When BlueSnapRequestType is set to 2, this setting can be used to specify which of the last retrieved vaulted shopper's card payment sources the component should populate its fields with. Valid values are -1 to BlueSnapCardCount-1.

To add a new card payment source, set this to -1, which will cause the component to reset the populated fields to their default values.

To update an existing card payment source (be it the card expiration date or its billing information), first set this to the desired card's index, modify the fields you wish to change, and set the full card number and security code, and then call UpdateSubscription. (The update request will fail if you do not set the full card number and security code first, they are not returned when the vaulted shopper is retrieved.)

Note that the BlueSnap API makes no guarantee about the order of the card payment sources when it returns a vaulted shopper response. As such, it is important that you never assume that you know which card is at a particular index right after you call GetSubscriptionStatus or UpdateSubscription.

Important: Be sure to call GetSubscriptionStatus after setting BlueSnapRequestType (or after calling UpdateSubscription with it already set) in order to ensure that you have retrieved the most recent data!

BlueSnapEnterpriseUdfs:   User-Defined Fields (UDFs) to send when updating a BlueSnap vaulted shopper.

This setting can be set to a JSON object like the following one in order to send Enterprise UDFs when updating a vaulted shopper profile's payment source: {"udf": [ { "udfValue": "aaa", "udfName": "ENT_UDF1" }, { "udfValue": "bbb", "udfName": "ENT_UDF2" } ]} Note: Content set using this setting will be used as the value of the transactionFraudInfo.enterpriseUdfs JSON field in the request body; it is not validated or manipulated first, it is used "as-is".

BlueSnapGetToken:   Retrieves a new hosted payment fields token (pfToken) from BlueSnap.

Each time this setting is queried, it will retrieve a new pfToken from BlueSnap. This token can then be passed to BlueSnap's hosted payment fields libraries, and then later passed in the vaulted shopper request using the special field pfToken. Refer to BlueSnap's documentation for more information about hosted payment fields.

BlueSnapRequestType:   The request type for the BlueSnap gateway.

This configuration setting is used to specify the request type for the BlueSnap gateway.

When you set the value of this setting, the component resets the properties, special fields, and configuration settings it uses to map to BlueSnap vaulted shopper fields. Only the following retain their values: Gateway, MerchantLogin, MerchantPassword, TestMode, BlueSnapVaultedShopperId, and Response fields (other than CVVResult and AVSResult, which are reset).

It is expected that you will call GetSubscriptionStatus to retrieve and populate the component with the latest vaulted shopper details after setting this (unless you plan to create a new vaulted shopper, or keep in mind that any fields not sent in an update request may be cleared by BlueSnap).

See RecurringBilling Gateway Setup and Required Properties for details.

Possible values are:

ValueDescription
0 Create vaulted shopper with basic information
1 Retrieve/Update basic vaulted shopper information
2 Retrieve/Add/Update a Card payment source
3 Retrieve/Update the ECheck payment source

The default value is 0, which is the only valid request type when calling the CreateSubscription.

The other request types require you to set the Vaulted Shopper ID via the BlueSnapVaultedShopperId configuration setting, after which you may use the GetSubscriptionStatus and UpdateSubscription methods to retrieve and add/update vaulted shopper data (note that any method parameters are ignored).

Note that all basic information is automatically retrieved and then re-sent when adding/updating any payment source in order to prevent BlueSnap from clearing those fields.

BlueSnapVaultedShopperId:   BlueSnap gateway vaulted shopper ID.

This configuration setting must be set to a valid vaulted shopper ID when updating a BlueSnap vaulted shopper. After creating a new vaulted shopper, it will contain the newly created vaulted shopper's ID. See BlueSnapRequestType for more information.

CardIssueNumber:   Special Issue Number used for Switch and Solo cards.

This field is used for the gateways the support International card types. Supported gateways include: Adyen, Barclay, CyberSource, FastTransact, HSBC, NetBanx, NetBilling, Orbital, PayFuse, PaymentExpress, PayPoint, PlugNPay, SagePay, SECPay, and WorldPayXML. Switch, Solo, and some Maestro cards have a 1 or 2 digit Issue number printed on the front of the card, directly following the card number. If that issue number is present, it should be set with this config setting.

CardLast4Digits:   The last 4 digits of a credit card.

This configuration setting is used to specify the last 4 digits of the credit card in certain scenarios.

CardPresent:   Specifies whether the card is present during the transaction.

When set to "True" (default value), in the case of a manually entered card, the transaction will be processed with the card being identified as present. When set to "False", the transaction will be processed as a 'Card Not Present' transaction.

This config is currently applicable to the Heartland gateway.

CardStartMonth:   Used for some international cards.

If there is a Start Date present on the card, set the month here and the year in CardStartYear.

CardStartYear:   Used for some international cards.

If there is a Start Date on present on the card, set the year here and the month in CardStartMonth.

CardToken:   The credit card token.

This configuration setting is used to specify the credit card token (sometimes called a "nonce") to perform a transaction.

Note that this is only valid when the Gateway property is set to gwNuvei or gwSquare.

CardType:   Type of credit card being used in this transaction.

This config is used to specify the type of credit card being used in a retail transaction. The type will be computed by the component based on the Card data but this value can be specified to override any computed values.

The available card types are:

Value Description
0 Invalid or unknown prefix, card type not known
1 Visa or Delta Card
2 MasterCard
3 American Express Card
4 Discover Card
5 Diners Club or Carte Blanche Card
6 JCB Card
7 Visa Electron Card (runs as a Visa for most gateways)
8 Maestro Card
10 Laser Card (Ireland)

CheckNumber:   Check Number.

This configuration setting contains the Check Number. This is valid only for the BASYS, PhoeniXGate, and Repay gateways.

CheckRoutingNumber:   Determines whether to perform a checksum test on the RoutingNumber.

When set to 'true', the component will perform a checksum test on the BankRoutingNumber when CreateSubscription is called. This check helps identify errors within the specified BankRoutingNumber. Note that this check does not guarantee that the BankRoutingNumber is correct for the bank you wish to work with but does help in identifying mistyped numbers. The default value is 'false'.

COFPermission:   Indicates if the customer gave permission to make a Card On File transaction.

When true, this setting indicates that the customer gave the merchant permission to perform a Card On File (COF) transaction. Currently only used by CardPointe (gwCardPointe).

CompanyName:   The Customer's Company Name.

This config contains the Customer's Company Name associated with the billing address.

ConvenienceFee:   The total convenience fee charged for a transaction.

This field is used to specify the total convenience fee charged for the transaction. This field is applicable to the FirstDataPayPoint and Litle / Vantiv gateway.

CustomerPassword:   The Customer's Password.

This field is used to set a password for the customer. This field has different uses depending on the gateway. Please see the gateway specifications for further information as to how this field is used. This config is applicable to the PlugNPay gateway.

CustomerUsername:   The Customer's Username.

This field is used to set a username for the customer. This field has different uses depending on the gateway. Please see the gateway specifications for further information as to how this field is used.

CyberSourceDeleteSubscription:   Whether subscriptions should be deleted when CancelSubscription is called.

This setting determines whether CyberSource subscriptions will be deleted (True) or just cancelled (False) when the CancelSubscription method is called.

By default this setting is False; calling CancelSubscription will cause a subscription to be cancelled, but it will remain in the CyberSource Business Center.

CyberSourceXMLEscape:   Determines whether to XML escape the CyberSource gateway request field values.

If this setting is set to "True", the request field values will be XML escaped prior to being sent to the CyberSource gateway. If this setting is set to "False" (default), the component does not perform any XML escaping and the values are sent exactly as specified. The default value is "False".

DateFormat:   The format of the date properties.

This field is used to specify the date format to be used for the various date properties: PaymentScheduleStartDate, PaymentScheduleEndDate, SubscriptionDetailsStartDate, SubscriptionDetailsEndDate, SubscriptionDetailsNextPaymentDate, and SubscriptionDetailsLastPaymentDate. The date must be specified and will be displayed in the format specified. The default format is: "MM/dd/yyyy".

Applicable format values are:

Format Description
'Y' or 'y' Year
'M' Month
'd' Day Of Month

EscapeXML:   Automatically escape data within XML tags.

When set to true, this config will cause the component to automatically escape the XML data in the request. The default value is false. This is currently only supported in the Authorize.Net XML and CIM gateways.

EwayCustomerId:   The Customer Id used to authenticate with the Eway gateway.

This config is used to specify the Customer Id for the Eway account and is used for authentication.

EwayInitialDate:   The date of the initial payment for the Eway gateway.

This setting may be used to specify the date that the PaymentScheduleInitialAmount should be charged. The date is based on the format specified via DateFormat and must be the same as, or before PaymentScheduleStartDate. This setting is optional.

EwayTransactionType:   The Transaction Type for the Eway gateway.

This setting defines the transaction type for the Eway gateway and is applicable when calling CreateSubscription, UpdateSubscription, GetSubscriptionStatus, and CancelSubscription. See RecurringBilling Gateway Setup and Required Properties for details. Possible values are:

Value Description
0 Rebill Event: Used to create a defined payment plan for a customer. The customer Id must be specified via TransactionId.
1 Customer: Used to create a customer. A customer must be created before creating a recurring transaction (Rebill Event).

FirstDataPayPointAgreedToTerms:   Specifies whether the customer has approved the registration process and agreed to the terms for the FirstDataPayPoint gateway.

This setting is used when sending a registration request for the FirstDataPayPoint gateway. For the registration to be stored in First Data's system, the customer must be asked for approval of the registration process and this setting must be set to 'True'. If 'False' (default value) is set, the registration process will fail.

FirstDataPayPointTransactionType:   The Transaction Type for the FirstDataPayPoint gateway.

This setting defines the transaction type for the FirstDataPayPoint gateway and is applicable when calling CreateSubscription, UpdateSubscription, GetSubscriptionStatus, and CancelSubscription. See RecurringBilling Gateway Setup and Required Properties for details. Possible values are:

Value Description
0 Recurring Transaction: Used to create a defined payment plan for a generated registration. The Registration Id must be specified via TransactionId.
1 Registration: Used to create a registration for card, billing, and shipping information. A registration must be created before creating a recurring transaction.

HashAlgorithm:   Algorithm used for hashing.

Certain gateways allow the request to be hashed as an additional authentication mechanism. This configuration setting controls which algorithm is used for hashing. Valid values are:

Value Algorithm
0 MD5 (default)
1 SHA-1

HashSecret:   Security key used to generate a hash for gateways supporting such functionality.

Some gateways allow for the generation of a hash for added security. The following gateways support this config.

Authorize.Net: The newest version of the protocol includes an optional Hash Secret, which may be used to verify that a server response is actually from an Authorize.Net server. The hash secret is concatenated with the MerchantLogin, ResponseTransactionId, and TransactionAmount. This value is then hashed with the MD5 algorithm and compared to the value returned by the server. If they do not match, the component raises an exception. If the AIMHashSecret is left blank, this check will not be performed. The Server's Hash Secret may be set using the Authorize.Net online merchant interface, located at https://secure.authorize.net/.

Bank of America: This value will be the HMAC Key generated for you by the gateway. This value is required and an exception will be thrown if not specified.

BarClay and Ingenico: This value is optional and when specified 'SHASIGN' parameter will be computed and sent.

Bambora/Beanstream: If hash validation is required then set this to your hash key. HashAlgorithm will also need to be set accordingly.

Nuvei: This value is required in all transactions. The value is unique to each terminal and can be set through the online interface at "https://testpayments.nuvei.com/merchant/selfcare/".

USAePay: This value is optional and when a 'Pin' value is specified, the 'UMhash' parameter will be computed and sent.

LicenseDOB:   Customer's Date of Birth as indicated on his drivers license.

This config contains the customer's date of birth as it appears on his driver's license. The format varies between gateways, so please see the specifications for correct formatting. This config may be used by the gateway for fraud screening.

LicenseNumber:   Customer's driver's license number.

This config contains the customer's driver's license number and may be used by the gateway for fraud screening.

LicenseState:   State in which customer's driver's license was issued.

This config contains the two-digit abbreviated postal code indicating the state in which the customer's driver's license was issued. This config may be used by the gateway for fraud screening.

LitleCardholderId:   Describes the method used to identify the cardholder at the point of sale for the Litle gateway.

This specifies the method used to identify the customer when performing a retail transaction.

Possible values are:

Value Description
"signature" (default) Customer signature obtained.
"pin" PIN Number.
"nopin" Unattended terminal - no PIN pad.
"directmarket" Mail, telephone, or online.

LitleSubscriptionAggregate:   Used to specify an XML aggregate for Subscription Create and Update transactions within the Litle gateway.

This setting specifies an XML aggregate when creating or updating a subscription for the Litle gateway. Specifically this allows you to create, update, or delete Discounts and AddOns. Please see the Litle XML Reference Guide for further information regarding these XML fields. This setting is only used when LitleTransactionType is set to '1' and CreateSubscription or UpdateSubscription is called.

LitleTransactionType:   The Transaction Type for the Litle gateway.

This setting specifies the transaction type for the Litle gateway and is applicable when calling CreateSubscription, UpdateSubscription, and CancelSubscription. See RecurringBilling Gateway Setup and Required Properties for details. Possible values are:

Value Description
0 Plan: Used to create a defined payment plan. This is applicable when calling CreateSubscription or UpdateSubscription.
1 Subscription: Used to enroll a customer in recurring billing based on a specified payment plan. This is applicable when calling CreateSubscription, UpdateSubscription, or CancelSubscription.

LitleTrialFrequency:   Used to specify a trial frequency for the Litle gateway.

This setting specifies a trial frequency for the Litle gateway. It is used in conjunction with PaymentSchedule. Possible values are:

  • "MONTH" (Trial interval of one month)
  • "DAY" (Trial interval of one day).
MerchantCode:   A gateway-supplied merchant number, code, or Id.

For the CardPointe gateway, this configuration setting is required, and should contain your Merchant Id.

For the Litle gateway, this configuration setting is required, and should contain your Merchant Id.

For the MIT gateway, this configuration setting is required, and should contain your Merchant Number (Contado).

For the Priority Payment Systems gateway, this configuration setting is required, and should contain your Merchant Id.

For the WorldPayXML gateway, this configuration setting is optional; it is only needed if you require that the "merchantCode" sent in the request be different from your MerchantLogin (e.g., when processing AMEX transactions, or when supporting multiple currencies).

MerchantPartnersLast4Digits:   The last 4 digits of the account number for a transaction processed via the MerchantPartners or WorldPay Link gateways.

The last 4 digits of the account number are required to perform UpdateSubscription, CancelSubscription, and GetSubscriptionStatus methods for the MerchantPartners or the WorldPay Link gateways.

MerchantPartnersReaderType:   The reader type used to read and encrypt a swiped card for the MerchantPartners or WorldPay Link gateways.

This setting is used to specify the encrypted reader type used to read and encrypt a swiped card. The specified value is sent in the request and is used by the gateway to decrypt the card data so the transaction can be processed.

Valid Values:

Value Description
1 Magtek Udynamo
2 Magtek IPAD
3 All IDTech Devices
4 Specific Ingenico Devices

MITFlag:   For the MIT framework - Used to indicate that a transaction is merchant initiated.

When making a Merchant Initiated Transaction (MIT), this configuration setting should be set to true to indicate to the payment gateway that the transaction is merchant initiated. Used by the Orbital payment gateway.

MITPriorTransId:   For the MIT framework - Used to specify a prior transaction id to be referenced in a merchant initiated transaction.

When making a Merchant Initiated Transaction (MIT), this configuration setting can be used to specify the transaction Id of a previously successful authorization. Used by the Orbital and CyberSource payment gateways.

MITType:   For the MIT framework - Indicates the type of transaction being requested in a Merchant-Initiated Transaction (MIT).

When making a Merchant Initiated Transaction (MIT), this configuration setting is used to specify the type or reason for the merchant initiated transaction. The possible values and formats for this field vary by gateway, so check the gateway's documentation for the associated values and their meanings.

MyVirtualMerchantUserId:   The MyVirtualMerchant user Id as configured on VirtualMerchant.

This field is used to specify your MyVirtualMerchant user Id which is required (along with MerchantLogin and MerchantPassword) as part of the user authentication.

NetBillingVersion:   The Version to be sent in the User-Agent heading of a NetBilling gateway request.

The Version portion of the User-Agent HTTP header is required by NetBilling. The default value is "1".

NuveiPermittedTerminals:   A list of the terminals permitted to use a Nuvei secure card.

This config is used when creating a secure card for Nuvei to list the terminals that will be allowed to use the created card. This should be a comma-separated list of terminal Ids, i.e. "11111,22222,33333".

OmniFundTransactionType:   The Transaction Type for the OmniFund gateway.

This settings specifies the transaction type for the OmniFund gateway and is applicable when calling CreateSubscription, UpdateSubscription, GetSubscriptionStatus, and CancelSubscription. See RecurringBilling Gateway Setup and Required Properties for details. Possible values are:

Value Description
0 Recurring Transaction: Used to create or modify a recurring transaction. The customer Id must be specified via CustomerId, and the account Id must be specified via TransactionId.
1 Customer: Used to create, modify, or retrieve information about a customer. A customer must be created before creating an account or recurring transaction.
2 Account: Used to create, modify, or retrieve information about an account. The customer Id must be specified via CustomerId. An account must be created before creating a recurring transaction.

OrbitalConnectionPassword:   Orbital Connection Password field used by the Orbital gateway.

If OrbitalConnectionPassword is set, the OrbitalConnectionUsername should also be set. This field is case-sensitive.

OrbitalConnectionUsername:   Orbital Connection Username field used by the Orbital gateway.

If OrbitalConnectionUsername is set, the OrbitalConnectionPassword should also be set.

OrbitalCustomerProfileFromOrderInd:   Customer Profile Number generation Options for the Orbital gateway.

"A" Auto Generate the CustomerRefNum (CustomerId)
"S" Use CustomerRefNum (CustomerId) sent in the request.
"0" Use OrderID (InvoiceNumber) sent in the request.
"D" Use Comments (TransactionDesc) sent in the request.

OrbitalCustomerProfileOrderOverrideInd:   Indicator to specify how the CustomerId is leveraged to populate other data sets for the Orbital gateway.

"NO" No mapping to order data.
"OI" Pre-populate OrderId (InvoiceNumber) with the Customer Reference Number (CustomerId).
"OD" Pre-populate the Comments field (TransactionDesc) with the Customer Reference Number (CustomerId).
"OA" Pre-populate the OrderId (InvoiceNumber) and Comments (TransactionDesc) fields with the Customer Reference Number (CustomerId).

Note: This field is auto-populated to "NO" when OrbitalCustomerProfileFromOrderInd is set.

PayerIP:   The IP address of the payer.

This config is used to specify the IP address of the payer, which is required by some gateways.

PaymentWorkSuiteClientCode:   The 3DSI assigned client code sent in a request to the PaymentWorksuite gateway.

This field is used to specify the client code that is assigned by 3DSI. This code uniquely identifies your organization for the purpose of accessing and authenticating to the Payment WorkSuite.

PaymentWorkSuiteLocationCode:   The 3DSI assigned location code sent in a request to the PaymentWorksuite gateway.

This field is used to specify the location code that uniquely identifies a specific location that is associated with the merchant identified by the specified PaymentWorkSuiteMerchantCode.

PaymentWorkSuiteMerchantCode:   The 3DSI assigned merchant code sent in a request to the PaymentWorksuite gateway.

This field is used to specify the merchant code that uniquely identifies a specific merchant within the Payment WorkSuite.

PaymentWorkSuiteTransactionType:   The transaction type to send for the Payment WorkSuite gateway.

This config is used to specify the transaction type to send for the Payment WorkSuite gateway and is used in conjunction with the API methods to perform various actions.

The available transaction types are:

Value Description
0 (default) Stored Credit Card - Used to perform a stored credit card operations.
1 Customer - Used to perform customer operations.

PayTraceIntegratorId:   Used to specify the Integrator Id value assigned by the PayTrace gateway.

This value is assigned by PayTrace and is used for validation and tracking purposes. The default value is: "90000035NSFT".

PayTraceTransactionType:   The Transaction Type for the PayTrace gateway.

This setting is used to specify the transaction type for the PayTrace gateway and is applicable when calling CreateSubscription, UpdateSubscription, and CancelSubscription. See RecurringBilling Gateway Setup and Required Properties for details. Possible values are:

Value Description
0 Customer: Used to create a customer. A customer must be created before creating a recurring payment.
1 Recurring Payment: Used to create a recurring payment for a customer. The customer Id must be specified via TransactionId.

PayWiserCardToken:   PayWiser Gateway Card Token Value.

This configuration setting is populated at the time the Token is created by calling CreateSubscription and setting PayWiserRequestType configuration setting to 1. This configuration setting must be set to the generated card token when calling CreateSubscription and setting PayWiserRequestType configuration setting to 2.

PayWiserPaymentHour:   Payment hour.

This configuration setting can be used to specify the hour of the day, when each payment will be executed. This configuration setting must be set when automatically creating the recurring schedule using the PaymentSchedule property.

PayWiserPlanPattern:   PayWiser plan pattern for creating a recurring plan.

This configuration setting can be used to specify a custom plan pattern for recurring payments. If set, this configuration setting will override all the fields previously set using the PaymentSchedule property.

Structure of PayWiserPlanPattern and PayWiserRetryPattern:

For daily recurrence:

Meaning Length Example Description
Type designator 1 D D - Daily
Start date 8 20160301 Recurring schedule start date in YYYYMMdi format
End date 8 ZZZZZZZZ Recurring schedule end date in YYYYMMdi format. If you do not wish to limit recurring payments with end date, this part should be >>ZZZZZZZ<<
Number of occurrences 4 0010 Number of occurrences
Predefined 2 02 Predefined
Regenerate every X days 3 003 Number of days in between payments

Example: D20160301ZZZZZZZZ001002003

Explanation: Starting from 1.3.2016, there will be payment every three days and there will be 10 repetitions. If you wish to make a payment every day, pattern would be D20160301ZZZZZZZZ001002001.

For weekly recurrence:

Meaning Length Example Description
Type designator 1 W W - Weekly
Start date 8 20160301 Recurring schedule start date in YYYYMMdi format
End date 8 ZZZZZZZZ Recurring schedule end date in YYYYMMdi format. If you do not wish to limit recurring payments with end date, this part should be >>ZZZZZZZ<<
Number of occurrences 4 0010 Number of occurrences
Predefined 2 02 Predefined
Regenerate on Sunday 1 N Y for true, N for false
Regenerate on Monday 1 Y Y for true, N for false
Regenerate on Tuesday 1 N Y for true, N for false
Regenerate on Wednesday 1 N Y for true, N for false
Regenerate on Thursday 1 N Y for true, N for false
Regenerate on Friday 1 N Y for true, N for false
Regenerate on Saturday 1 N Y for true, N for false
Regenerate every X weeks3 003 Number of weeks in between payments

Example: W20160301ZZZZZZZZ001002NYNNNNN001

Explanation: Starting from 1.3.2016, there will be payment every Monday and there will be 10 repetitions. If you wish to make a payment every 2 weeks, pattern would be W20160301ZZZZZZZZ001002NYNNNNN002.

For For monthly recurrence:

Meaning Length Example Description
Type designator 1 M M - Monthly
Start date 8 20160301 Recurring schedule start date in YYYYMMdi format
End date 8 ZZZZZZZZ Recurring schedule end date in YYYYMMdi format. If you do not wish to limit recurring payments with end date, this part should be >>ZZZZZZZ<<
Number of occurrences 4 0010 Number of occurrences
Regeneration type 1 0 Regeneration type
End date type 1 2 End date type
Regenerate on specific day2 22 Day of the month when payment is to be made
Custom date part one 1 Z A - first, B - second, C - third, D - fourth, E - last
Custom date part two 1 Z A - day, B - weekday, C - weekend day, D - Sunday, E - Monday, F - Tuesday, G - Wednesday, H - Thursday, I - Friday, J - Saturday
Adjustment value 3 000 Adjustment value
Regenerate every X months3 003 Number of months in between payments

Example: M20160301ZZZZZZZZ00100229ZZ000001

Explanation: Starting from 1.3.2016, there will be payment on every 22nd of the month and there will be 10 repetitions. If you wish to make a payment every 2 months with 10 repetitions, pattern would be M20160301ZZZZZZZZ00100229ZZ000002.

For For Yearly recurrence:

Meaning Length Example Description
Type designator 1 Y Y - Yearly
Start date 8 20160301 Recurring schedule start date in YYYYMMdi format
End date 8 ZZZZZZZZ Recurring schedule end date in YYYYMMdi format. If you do not wish to limit recurring payments with end date, this part should be >>ZZZZZZZ<<
Number of occurrences 4 0010 Number of occurrences
Regeneration type 1 0 Regeneration type
End date type 1 2 End date type
Regenerate on specific day2 22 Day of the month when payment is to be made
Regenerate on specific month2 03 Month of the year when payment is to be made
Custom date part one 1 Z A - first, B - second, C - third, D - fourth, E - last
Custom date part two 1 Z A - day, B - weekday, C - weekend day, D - Sunday, E - Monday, F - Tuesday, G - Wednesday, H - Thursday, I - Friday, J - Saturday
Custom date part three 1 Z A - January, B - February, C - March, D - April, E - May, F - June, G - July, H - August, I - September, J - October, K - November, L - December
Adjustment value 3 000 Adjustment value

Example: Y20160301ZZZZZZZZ0010022203ZZZ000

Explanation: Starting from 1.3.2016, there will be payment on every March 22nd and there will be 10 repetitions. If you wish to make a payment every first day of December with 10 repetitions, pattern would be Y20160301ZZZZZZZZ0010120000AAL000.

PayWiserRecurringPlanId:   PayWiser Recurring Plan Id.

This configuration setting is populated at the time the recurring plan is created by calling CreateSubscription and setting PayWiserRequestType configuration setting to 0 (default). This configuration setting must be set to the generated plan id when calling CancelSubscription and setting PayWiserRequestType configuration setting to 3.

PayWiserRequestType:   The request type for the PayWiser gateway.

This configuration setting is used to specify the request type for the PayWiser gateway.

See RecurringBilling Gateway Setup and Required Properties for details.

Possible values are:

Value Description
0 CreateRecurringPlan: Used to create new recurring plan, which can later on be used to start new recurring payments.
1 Tokenize: Used to generate a Token based on the Credit Card information, which can later on be used to start new recurring payments.
2 StartRecurringPayment: Used to create and start a new recurring payment for previously tokenized card. The Card Token must be specified via PayWiserCardToken configuration setting.
3 TerminateRecurringPlan: Used to terminate a recurring plan.
4 TerminateRecurringPayment: Used to terminate (end) recurring payment schedule immediately.

The default value is 0 (Customer Profile). Option 0, 1 and 2 are only valid when CreateSubscription method is called. Option 3 and 4 are only valid when calling CancelSubscription method.

PayWiserRetryPattern:   PayWiser retry pattern for retrying failed payments.

This configuration setting can be used to specify a custom retry pattern for recurring payments in case of a failed payment. Please follow the instructions described in PayWiserPlanPattern for formatting the retry pattern.

Note if this configuration setting is set, MaxRetryCount filed must be also set using the AddSpecialField method. For example:

recurring.AddSpecialField("MaxRetryCount", "1"); recurring.Config("PayWiserRetryPattern=W20160901ZZZZZZZZ010002NNYYYYN002");

PayWiserTokenReferenceId:   PayWiser Gateway Token Reference Id.

This configuration setting is populated at the time the Token is created by calling CreateSubscription and setting PayWiserRequestType configuration setting to 1.

PhoeniXGateCardInfoKey:   PhoeniXGate Gateway Credit Card Info Key.

This configuration setting is populated at the time the payment method is added to the system by calling CreateSubscription and setting PhoeniXGateRequestType configuration setting to 1. This configuration setting must be set when PhoeniXGateRequestType configuration setting is set to 1 and when calling UpdateSubscription, and CancelSubscription.

PhoeniXGateCheckInfoKey:   PhoeniXGate Gateway Check Info Key.

This configuration setting is populated at the time the payment method is added to the system by calling CreateSubscription and setting PhoeniXGateRequestType configuration setting to 2. This configuration setting must be set when PhoeniXGateRequestType configuration setting is set to 2 and when calling UpdateSubscription, and CancelSubscription.

PhoeniXGateContractID:   PhoeniXGate Gateway Contract ID.

Unique identifier assigned to the contract by the merchant at the time the payment schedule is created. This configuration setting must be set when PhoeniXGateRequestType configuration setting is set to 3 and when calling CreateSubscription.

PhoeniXGateContractKey:   PhoeniXGate Gateway Contract Key.

This configuration setting is populated at the time the payment schedule is added to the system by calling CreateSubscription and setting PhoeniXGateRequestType configuration setting to 3. This configuration setting must be set when PhoeniXGateRequestType configuration setting is set to 3 and when calling UpdateSubscription, and CancelSubscription.

PhoeniXGateCustomerKey:   PhoeniXGate Gateway Customer Key.

This configuration setting is populated at the time the customer profile is created by calling CreateSubscription and setting PhoeniXGateRequestType configuration setting to 0. This configuration setting must be set when the PhoeniXGateRequestType configuration setting is set to 1, 2, 3, 4 and 5 and when calling UpdateSubscription, and CancelSubscription.

PhoeniXGateCustomerStatus:   Indicates the Customer Status.

Customer status at the time the customer profile is created and PhoeniXGateRequestType is set to 0 (Default).

Possible values are:

Value Description
0 Active
1 Inactive
2 Pending
3 Clsoed

The default value is 0 (Active).

PhoeniXGateNextBillingDate:   PhoeniXGate Gateway Next Billing Date.

Identifies the next time the contract will come due in MM/DD/YYYY format. This configuration setting must be set when PhoeniXGateRequestType configuration setting is set to 3 and when calling CreateSubscription, and UpdateSubscription.

Note: If only the billing date is to be updated, it is better to set the PhoeniXGateRequestType configuration setting to 4 and set the PhoeniXGateNumberOfDays configuration setting to the number of days to be added to the billing date.

PhoeniXGateNumberOfDays:   Number of days to be added to the next billing date.

This configuration setting must be set to the number of days to be added to the next billing date when PhoeniXGateRequestType configuration setting is set to 4 and when calling and UpdateSubscription. PhoeniXGateContractKey must also be set to the corresponding contract key.

PhoeniXGatePaymentType:   Indicates the Payment Type.

When PhoeniXGateRequestType is set to 3 (Recurring Payment) a payment type must be set to one of the following values.

Possible values are:

Value Description
0 Credit Card
1 Check/ACH

The default value is 0 (Credit Card).

PhoeniXGateRequestType:   The request type for the PhoeniXGate gateway.

This configuration setting is used to specify the request type for the PhoeniXGate gateway.

See RecurringBilling Gateway Setup and Required Properties for details.

Possible values are:

Value Description
0 Customer Profile: Used to create a customer profile. This is the first step towards successfully storing and initiating recurring payments.
1 Credit Card Info: Used to to store a credit card number. The Customer Key must be specified via PhoeniXGateCustomerKey configuration setting.
2 Check Info: Used to store a checking account number. The Customer Key must be specified via PhoeniXGateCustomerKey configuration setting.
3 Recurring Payment: Used to create a payment schedule. The Customer Key must be specified via PhoeniXGateCustomerKey configuration setting.
4 Next Bill Date: Used to update the next billing date in the event that a payment was declined and a contract suspended. The Customer Key and Contract Key must be specified via PhoeniXGateCustomerKey, and PhoeniXGateContractKey configuration settings.
5 Get Token: Used to generate a Token based on the Credit Card information. The Customer Key must be specified via PhoeniXGateCustomerKey configuration setting.

The default value is 0 (Customer Profile).

PhoeniXGateToken:   PhoeniXGate Gateway Token Value.

This configuration setting is populated at the time the Token is created by calling CreateSubscription and setting PhoeniXGateRequestType configuration setting to 5.

PhoeniXGateTokenMode:   Indicates the Token Type.

When PhoeniXGateRequestType is set to 5 (Get Token) a token type must be set to one of the following values.

Possible values are:

Value Description
0 Default (PhoeniXGate Gateway Default Format).
1 Card Format.

The default value is 0 (Gateway Format).

PlanetPaymentFrequencyDate:   The date of the month that a recurring payment should occur for the Planet Payment gateway.

This configuration setting is used to specify the date of the month that a recurring payment should occur when PaymentScheduleFrequency is set to "Monthly", or "Yearly".

PlanetPaymentFrequencyDay:   The day that a recurring payment should occur for the Planet Payment gateway.

This configuration setting is used to specify the day of the week that a recurring payment should occur when PaymentScheduleFrequency is set to "Weekly", "Monthly", or "Yearly". This setting is made up of two fields, a value and a type. The value and type are separated with a colon (:), i.e. [value]:[type]. Possible values are:

Value Description
SUN Schedule runs on Sunday.
MON Schedule runs on Monday.
TUE Schedule runs on Tuesday.
WED Schedule runs on Wednesday.
THU Schedule runs on Thursday.
FRI Schedule runs on Friday.
SAT Schedule runs on Saturday.
DAY Schedule runs on the FIRST or LAST day.
WEEKDAY Schedule runs on the FIRST or LAST weekday.

Possible types are:

Type Description
FIRST Schedule runs on First FrequencyDay.
SECOND Schedule runs on Second FrequencyDay.
THIRD Schedule runs on Third FrequencyDay.
FOURTH Schedule runs on Fourth FrequencyDay.
LAST Schedule runs on Last FrequencyDay.

PlanetPaymentFrequencyMonth:   The month that a recurring payment should occur for the Planet Payment gateway.

This setting is used to specify the month that a recurring payment should occur when PaymentScheduleFrequency is set to "Yearly". This is used in conjunction with PlanetPaymentFrequencyDay. Possible values are:

Value Description
JAN Schedule runs in January.
FEB Schedule runs in February.
MAR Schedule runs in March.
APR Schedule runs in April.
MAY Schedule runs in May.
JUN Schedule runs in June.
JUL Schedule runs in July.
AUG Schedule runs in August.
SEP Schedule runs in September.
OCT Schedule runs in October.
NOV Schedule runs in November.
DEC Schedule runs in December.

QBMSTransactionType:   The Transaction Type for the QBMS gateway.

This setting specifies the transaction type for the QBMS gateway and is applicable when calling CreateSubscription, UpdateSubscription, and CancelSubscription. See RecurringBilling Gateway Setup and Required Properties for details. Possible values are:

Value Description
0 Wallet: Used to create a wallet entry. A wallet must be created before creating a scheduled billing event.
1 Scheduled Billing: Used to create a scheduled billing event. The wallet Id must be specified via TransactionId.

RawRequest:   Returns the data that was sent to the gateway.

This may be queried after a call to any method that sends data to the gateway. This will return the request data that was sent to the gateway which may be useful for troubleshooting purposes. For instance: component.Sale() MyString = component.Config("RawRequest")

RawResponse:   Returns the data that was received from the gateway.

This may be queried after a call to any method that sends data to the gateway. This will return the response that was received to the gateway which may be useful for troubleshooting purposes. For instance: component.Sale() MyString = component.Config("RawResponse")

RepayCardInfoKey:   Repay Gateway Credit Card Info Key.

This configuration setting is populated at the time the payment method is added to the system by calling CreateSubscription and setting RepayRequestType configuration setting to 1. This configuration setting must be set when RepayRequestType configuration setting is set to 1 and when calling UpdateSubscription, and CancelSubscription.

RepayCheckInfoKey:   Repay Gateway Check Info Key.

This configuration setting is populated at the time the payment method is added to the system by calling CreateSubscription and setting RepayRequestType configuration setting to 2. This configuration setting must be set when RepayRequestType configuration setting is set to 2 and when calling UpdateSubscription, and CancelSubscription.

RepayContractID:   Repay Gateway Contract ID.

Unique identifier assigned to the contract by the merchant at the time the payment schedule is created. This configuration setting must be set when RepayRequestType configuration setting is set to 3 and when calling CreateSubscription.

RepayContractKey:   Repay Gateway Contract Key.

This configuration setting is populated at the time the payment schedule is added to the system by calling CreateSubscription and setting RepayRequestType configuration setting to 3. This configuration setting must be set when RepayRequestType configuration setting is set to 3 and when calling UpdateSubscription, and CancelSubscription.

RepayCustomerKey:   Repay Gateway Customer Key.

This configuration setting is populated at the time the customer profile is created by calling CreateSubscription and setting RepayRequestType configuration setting to 0. This configuration setting must be set when the RepayRequestType configuration setting is set to 1, 2, 3, 4 and 5 and when calling UpdateSubscription, and CancelSubscription.

RepayCustomerStatus:   Indicates the Customer Status.

Customer status at the time the customer profile is created and RepayRequestType is set to 0 (Default).

Possible values are:

Value Description
0 Active
1 Inactive
2 Pending
3 Clsoed

The default value is 0 (Active).

RepayNextBillingDate:   Repay Gateway Next Billing Date.

Identifies the next time the contract will come due in MM/DD/YYYY format. This configuration setting must be set when RepayRequestType configuration setting is set to 3 and when calling CreateSubscription, and UpdateSubscription.

Note: If only the billing date is to be updated, it is better to set the RepayRequestType configuration setting to 4 and set the RepayNumberOfDays configuration setting to the number of days to be added to the billing date.

RepayNumberOfDays:   Number of days to be added to the next billing date.

This configuration setting must be set to the number of days to be added to the next billing date when RepayRequestType configuration setting is set to 4 and when calling and UpdateSubscription. RepayContractKey must also be set to the corresponding contract key.

RepayPaymentType:   Indicates the Payment Type.

When RepayRequestType is set to 3 (Recurring Payment) a payment type must be set to one of the following values.

Possible values are:

Value Description
0 Credit Card
1 Check/ACH

The default value is 0 (Credit Card).

RepayRequestType:   The request type for the Repay gateway.

This configuration setting is used to specify the request type for the Repay gateway.

See RecurringBilling Gateway Setup and Required Properties for details.

Possible values are:

Value Description
0 Customer Profile: Used to create a customer profile. This is the first step towards successfully storing and initiating recurring payments.
1 Credit Card Info: Used to to store a credit card number. The Customer Key must be specified via RepayCustomerKey configuration setting.
2 Check Info: Used to store a checking account number. The Customer Key must be specified via RepayCustomerKey configuration setting.
3 Recurring Payment: Used to create a payment schedule. The Customer Key must be specified via RepayCustomerKey configuration setting.
4 Next Bill Date: Used to update the next billing date in the event that a payment was declined and a contract suspended. The Customer Key and Contract Key must be specified via RepayCustomerKey, and RepayContractKey configuration settings.
5 Get Token: Used to generate a Token based on the Credit Card information. The Customer Key must be specified via RepayCustomerKey configuration setting.

The default value is 0 (Customer Profile).

RepayToken:   Repay Gateway Token Value.

This configuration setting is populated at the time the Token is created by calling CreateSubscription and setting RepayRequestType configuration setting to 5.

RepayTokenMode:   Indicates the Token Type.

When RepayRequestType is set to 5 (Get Token) a token type must be set to one of the following values.

Possible values are:

Value Description
0 Default (Repay Gateway Default Format).
1 Card Format.

The default value is 0 (Gateway Format).

SkipJackStatusIndex:   Gets subscription details at the specified status index.

This setting may be set after calling GetSubscriptionStatus and will populate SubscriptionDetails with the details located at the specified status index. Valid values are 1 through the value returned by ResponseText.

SquareCustomerCardCount:   The number of cards saved to the Square customer profile.

Square allows multiple credit cards to be saved to a customer profile. After retrieving a Square customer profile using GetSubscriptionStatus, this configuration setting can be queried to determine how many credit cards are saved to the profile.

SquareCustomerCardId:   The Id of a card saved to a Square customer profile.

This configuration setting holds the Id of a card-on-file associated with a Square customer profile.

This setting is automatically populated after creating a new card-on-file, or when SquareCustomerCardIndex is set after retrieving a Square customer profile.

This setting must be set before attempting to delete a card-on-file.

SquareCustomerCardIndex:   Which card's details to populate the component with from the retreived Square customer profile.

After retrieving a Square customer profile with GetSubscriptionStatus, this configuration setting can be used to select which card-on-file's details the component should reflect.

Valid values are -1 to (SquareCustomerCardCount - 1). Setting to -1 causes the component to reset/remove any currently populated Square customer card data.

SquareRequestType:   What type of Square customer data to create or delete.

This configuration setting controls what type of Square customer data is being created (when CreateSubscription is called) or deleted (when CancelSubscription is called). Possible values are:

  • 0: Customer Details (default)
  • 1: Customer Cards

When set to 0, the CreateSubscription and CancelSubscription methods will create and delete Square customer profiles.

When set to 1, the CreateSubscription and CancelSubscription methods will create and delete credit cards on the Square customer whose Id is specified by CustomerId.

Note that, regardless of this setting:

  • The GetSubscriptionStatus method will always retrieve all information associated with the Square customer profile whose Id is specified by CustomerId. (This includes all cards-on-file for that profile, refer to the SquareCustomerCardCount and SquareCustomerCardIndex configuration settings for more information.)
  • The UpdateSubscription method will always update the customer details using the information currently held by the component. (Square does not allow updating cards-on-file.)

StoreCardOnFile:   For the Stored Credentials framework - Used to indicate that the merchant will be storing the customer's card on file (COF).

For the Stored Credentials framework, this configuration setting should be set to true to indicate that the merchant will be storing the customer's card information. Permission should be obtained from the customer prior to storing card data. This configuration setting is used by the CyberSource gateway.

TaxId:   Company's Tax Id or a Customer's Social Security Number.

This property contains a Company's Tax Id or a Customer's Social Security Number. In the absence of driver's license information, this property may be used by the gateway for fraud screening.

TerminalCapability:   The capability of the terminal that is used to submit the transaction.

This config is used to specify the capability of the terminal being used in a retail transaction.

The available values for the CyberSource gateway are (If not specified, the component will set the value to either '2' or '3' based on the specified CardEntryDataSource.):

Value Description
1 Terminal has a magnetic stripe reader only.
2 Terminal has a magnetic stripe reader and manual entry capability.
3 Terminal has manual entry capability only.

The available values for the Litle gateway are (If not specified, the component will set the value to 'magstripe'.):

Value Description
notused Terminal not used.
magstripe Magnetic stripe reader capability.
keyedonly Keyed entry only capability.

TerminalId:   Terminal Id value sent in the transaction.

Many gateways allow/require an Id (terminal, developer, client, user, etc) sent in addition to the MerchantLogin and MerchantPassword. This config is required by Nuvei and Planet Payment.

TerminalType:   The terminal type that is used to submit the transaction.

This config is used to specify the terminal (device) type being used in a retail transaction.

The available values for Chase, First Data, LinkPoint, and YourPay are (required):

Value Description
StandAlone Point-of-Sale Credit Card Terminal
POS Electronic Cash Register
Unattended Unattended Terminal (i.e. Gas Pump)
Unspecified Used for all other applications

UseCardOnFile:   For the Stored Credentials framework - Used to indicate that the merchant is using stored card on file (COF) information for the request.

For the Stored Credentials framework, this configuration setting should be set to true to indicate that the merchant is using stored card information. This configuration setting is used by the CyberSource gateway.

XChildrenCount:   The number of child elements of the current element.

The number of child attributes of the current element. The XChildren configuration options will be indexed from 0 to XChildrenCount-1.

The current element is specified via the XPath configuration option.

This configuration option is read-only.

XChildrenName[x]:   The name of the child element.

Provides the name of the x'th child element of the current element.

The current element is specified via the XPath configuration option.

This configuration option is read-only.

XChildrenXText[x]:   The inner text of the child element.

Provides the inner text of the x'th child element of the current element.

The current element is specified via the XPath configuration option.

This configuration option is read-only.

XElement:   The name of the current element.

The current element is specified via the XPath configuration option.

This configuration option is read-only.

XPath:   Provides a way to point to a specific element in the returned XML or JSON response.

XPath implements a subset of the XML and JSON XPath specification, allowing you to point to specific elements in the XML or JSON documents. The path is a series of one or more element accessors separated by '/'. The path can be absolute (starting with '/') or relative to the current XPath location. The following are possible values for an element accessor:

'name' A particular element name
name[i] The i-th subelement of the current element with the given name
[i] The i-th subelement of the current element
[last()] The last subelement of the current element
[last()-i] The subelement located at the last location minus i in the current element
name[@attrname="attrvalue"] The subelement containing a particular value for a given attribute (supports single AND double quotes). Not available for JSON responses.
.. The parent of the current element

When XPath is set to a valid path, XElement points to the name of the element, with XChildren and XText providing other properties of the element.

Example (Setting XPath for XML)

Document root Charge.XPath = "/"
Specific Element Charge.XPath = "/root/SubElement1/SubElement2/"
i-th Child Charge.XPath = "/root/SubElement1[i]"

Example (Setting XPath for JSON)

Document root Charge.XPath = "/"
Specific Element Charge.XPath = "/root/SubElement1/SubElement2/"
i-th Child Charge.XPath = "/root/SubElement1/[i]"

XText:   The text of the current element.

The current element is specified in the XPath configuration option.

This configuration option is read-only.

HTTP Config Settings

AcceptEncoding:   Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the component adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The component only supports gzip and deflate decompression algorithms.

AllowHTTPCompression:   This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the component will accept compressed data. It then will uncompress the data it has received. The component will handle data compressed by both gzip and deflate compression algorithms.

When True, the component adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback:   Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the component will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the component raises an exception if the server does not support HTTP/2.

The default value is True.

Append:   Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization:   The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP component can be extended with other security schemes in addition to the authorization schemes already implemented by the component.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred:   Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize:   Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest:   Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL:   If set to True the URL will be encoded by the component.

If set to True, the URL passed to the component will be URL encoded. The default value is False.

FollowRedirects:   Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the component returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the component raises an exception.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the component raises an exception instead.

Following are the valid options:

  • 0 - Never
  • 1 - Always
  • 2 - Same Scheme

GetOn302Redirect:   If set to True the component will perform a GET on the new location.

The default value is False. If set to True, the component will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing:   HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion:   The version of HTTP used by the component.

This property specifies the HTTP version used by the component. Possible values are as follows:

  • "1.0"
  • "1.1" (default)
  • "2.0"
  • "3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the component will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince:   A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive:   Determines whether the HTTP connection is closed after completion of the request.

If True, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. You also may explicitly add the Keep-Alive header to the request headers by setting OtherHeaders to Connection: Keep-Alive. If False, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is False.

KerberosSPN:   The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel:   The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxRedirectAttempts:   Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the component will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion:   The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the component will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders:   Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the component beyond what is provided.

ProxyAuthorization:   The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

ProxyAuthScheme:   The authorization scheme to be used for the proxy.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyPassword:   A password if authentication is to be used for the proxy.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyPort:   Port for the proxy server (default 80).

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyServer:   Name or IP address of a proxy server (optional).

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyUser:   A user name if authentication is to be used for the proxy.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

SentHeaders:   The full set of headers as sent by the client.

This configuration setting returns the complete set of raw headers as sent by the client.

StatusLine:   The first line of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

TransferredData:   The contents of the last response from the server.

This configuration setting contains the contents of the last response from the server.

TransferredDataLimit:   The maximum number of incoming bytes to be stored by the component.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the component.

TransferredHeaders:   The full set of headers as received from the server.

This configuration setting returns the complete set of raw headers as received from the server.

TransferredRequest:   The full request as sent by the client.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

UseChunkedEncoding:   Enables or Disables HTTP chunked encoding for transfers.

If UseChunkedEncoding is set to True, the component will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the component will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

UseIDNs:   Whether to encode hostnames to internationalized domain names.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.

UseProxyAutoConfigURL:   Whether to use a Proxy auto-config file when attempting a connection.

This configuration specifies whether the component will attempt to use the Proxy auto-config URL when establishing a connection and ProxyAutoDetect is set to True.

When True (default), the component will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

UserAgent:   Information about the user agent (browser).

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the component whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

The appropriate values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the component binds.

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

0 IPv4 Only
1 IPv6 Only
2 IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir:   The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile:   Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList:   A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData:   The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the component will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the component is the same.

SSLCACerts:   A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP:   Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the component will use OCSP to check the validity of the server certificate. If set to 1 or 2, the component will first obtain the OCSP URL from the server certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the component will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when SSLProvider is set to Internal: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA"); Possible values when SSLProvider is set to Internal include:
  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the component will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

  • The platform provider is only available on Windows 11 / Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated ciphersuite.

Returns the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated ciphersuite strength.

Returns the strength of the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated ciphersuite.

Returns the ciphersuite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts:   A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component raises an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:

IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitive:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI:   Tells the component whether or not to use the system security libraries or an internal implementation.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this setting to true tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (RecurringBilling Component)

RecurringBilling Errors

159   Invalid form variable index (out of range).
501   Data field invalid length.
502   Data field invalid format.
503   Data field out of range.
504   Luhn digit check failed.
505   Card date invalid.
506   Card expired.
507   Card type unknown.
510   No gateway specified.
511   Invalid data entered.
512   Truncated response.
513   Invalid response.
514   A Special Field is required for this transaction type.
535   Signature verification failed.
542   Error computing MD5 hash for Authorize.Net

The component may also return one of the following error codes, which are inherited from other components.

HTTP Errors

118   Firewall Error. Error description contains detailed message.
143   Busy executing current method.
151   HTTP protocol error. The error message has the server response.
152   No server specified in URL
153   Specified URLScheme is invalid.
155   Range operation is not supported by server.
156   Invalid cookie index (out of range).
301   Interrupted.
302   Can't open AttachedFile.

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the component is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
302   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).

Copyright (c) 2023 4D Payments Inc.
E-Payment Integrator 2022 C++ Builder Edition - Version 22.0 [Build 8593]