ECheck Component

Properties   Methods   Events   Config Settings   Errors  

The ECheck component is used to process Electronic Check (ACH) transactions through Internet Payment services such as the Authorize.Net eCheck.Net service.

Syntax

TibpECheck

Remarks

The ECheck component allows you to use multiple Internet Payment Gateways through one interface and one component. This allows for easy migration from one gateway to another, as well as quick integration into applications or web services.

The ECheck component allows your website to securely process electronic checks without the need to redirect to a third-party site. All transactions are accomplished through a secure HTTPS Post to any supported gateway. The secure response is received and then stored in the component's response properties. Any web site on a standard HTTP server or any stand-alone application can process transactions without the need for a secure server or third-party intervention.

The first thing you must do is select one of the gateways supported by the ECheck component, and set up an account with that gateway vendor. Once you have an account set up with a valid (or test) login Id and password, you can use the ECheck component.

To begin, set the Gateway property to the gateway you wish to use. If this gateway supports an alternate URL to send test transactions to, set the GatewayURL at this time.

Next, set the MerchantLogin (and for some gateways the MerchantPassword). These are supplied by your gateway vendor when you set up an account.

Now you are ready to process transactions. Not all gateways process ACH or eCheck transactions the same way. While all gateways require a bank routing and account number, some require additional information such as a driver's license number, bank name, or the account type (checking or savings). The gateways and their required properties are listed in the Gateway property.

Once all your properties are set, simply call the Authorize method. If your gateway supports it, you may also credit bank accounts with the Credit method.

The following gateways are supported by the ECheck component:

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

BankAccountClass Property (ECheck Component)

Indicates whether a personal or business account is used for this transaction.

Syntax

__property TibpECheckBankAccountClass BankAccountClass = { read=FBankAccountClass, write=FSetBankAccountClass };

enum TibpECheckBankAccountClass {
  acPersonal=0,
  acBusiness=1
};

Default Value

acPersonal

Remarks

Indicates whether a personal or business account is used for this transaction.

Available values:

This property is not available at design time.

Data Type

Integer

BankAccountHolderName Property (ECheck Component)

Account holder's name.

Syntax

__property String BankAccountHolderName = { read=FBankAccountHolderName, write=FSetBankAccountHolderName };

Default Value

""

Remarks

Account holder's name. This property contains the customer's name as it appears on their account. Many gateways use this property in addition to, or instead of, the Customer Firsts and Last name properties. Note that if this property is not specified, the FullName property from the EPCustomer type will be used instead.

This property is not available at design time.

Data Type

String

BankAccountNumber Property (ECheck Component)

Bank account number for ACH transactions.

Syntax

__property String BankAccountNumber = { read=FBankAccountNumber, write=FSetBankAccountNumber };

Default Value

""

Remarks

Bank account number for ACH transactions. This property contains the customer's bank account number, which along with the BankRoutingNumber identify the location of the account where funds are to be drawn from for ACH transactions. This property is required for all ACH transactions.

This property is not available at design time.

Data Type

String

BankAccountType Property (ECheck Component)

Indicates whether a checking or savings account is used for this transaction.

Syntax

__property TibpECheckBankAccountTypes BankAccountType = { read=FBankAccountType, write=FSetBankAccountType };

enum TibpECheckBankAccountTypes {
  atChecking=0,
  atSavings=1
};

Default Value

atChecking

Remarks

Indicates whether a checking or savings account is used for this transaction. For gateways that support it, this property allows funds to be withdrawn (or added in the case of a Credit) from either the customer's Checking or Savings account.

Available values:

This property is not available at design time.

Data Type

Integer

BankName Property (ECheck Component)

Name of the account holder's bank.

Syntax

__property String BankName = { read=FBankName, write=FSetBankName };

Default Value

""

Remarks

Name of the account holder's bank. For example, Citibank, Wells-Fargo, Wachovia, etc. This property contains the name of the bank associated with the BankRoutingNumber.

This property is not available at design time.

Data Type

String

BankRoutingNumber Property (ECheck Component)

Routing number for ACH transactions.

Syntax

__property String BankRoutingNumber = { read=FBankRoutingNumber, write=FSetBankRoutingNumber };

Default Value

""

Remarks

Routing number for ACH transactions. This property contains the routing number to the customer's bank (Also known as an ABA code). This number indicates at which bank the BankAccountNumber is located, and is used to identify the location of the account where funds are to be drawn from for ACH transactions. This property is required for all ACH transactions.

Note: When using ACHPayments gateway, a leading zero must be added for Canadian bank accounts.

This property is not available at design time.

Data Type

String

CheckNumber Property (ECheck Component)

Indicates the check number to use for a transaction.

Syntax

__property String CheckNumber = { read=FCheckNumber, write=FSetCheckNumber };

Default Value

""

Remarks

This optional property allows the customer to select a check number to use for this ACH transaction. This property is only supported by the iTransact and NetBilling gateways.

Data Type

String

CompanyName Property (ECheck Component)

The Company Name.

Syntax

__property String CompanyName = { read=FCompanyName, write=FSetCompanyName };

Default Value

""

Remarks

This property contains the Company Name associated with the billing address.

Data Type

String

CustomerAddress Property (ECheck Component)

Customer's street address.

Syntax

__property String CustomerAddress = { read=FCustomerAddress, write=FSetCustomerAddress };

Default Value

""

Remarks

Customer's street address. This property is used as part of the Address Verification Service (AVS) and contains the customer's street address as it appears on their monthly statement. Only the street number, street name, and apartment number are required in This property. City, state, and zip code are set in the CustomerCity, CustomerState, and CustomerZip properties.

The length of this property varies by gateway. If the customer's address is very long, it is admissible to include only the street number in This property.

NOTE: For the Moneris gateway, this property should contain only the customer's street number. The street name should be added via the AddSpecialField method. For example:

component.CustomerAddress = "123" component.AddSpecialField("avs_street_name", "Nowhere Ln")

This property is not available at design time.

Data Type

String

CustomerAddress2 Property (ECheck Component)

A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.

Syntax

__property String CustomerAddress2 = { read=FCustomerAddress2, write=FSetCustomerAddress2 };

Default Value

""

Remarks

A specific detail on the customer's shipping address (such as building, suite, apartment, floor number etc.).

This property is not available at design time.

Data Type

String

CustomerAggregate Property (ECheck Component)

This property allows you to get or set an XML aggregate built from all of the Customer properties.

Syntax

__property String CustomerAggregate = { read=FCustomerAggregate, write=FSetCustomerAggregate };

Default Value

""

Remarks

This property allows you to get or set an XML aggregate built from all of the Customer properties. "EPCustomer" is the root element. The Customer properties make up the tags under the root, but without the beginning "Customer". For instance: <EPCustomer> <Address>123 Nowhere Ln.</Address> <Address2>Apt 3B.</Address2> <City>Beverly Hills</City> ... </EPCustomer>

This property is not available at design time.

Data Type

String

CustomerCity Property (ECheck Component)

Customer's city.

Syntax

__property String CustomerCity = { read=FCustomerCity, write=FSetCustomerCity };

Default Value

""

Remarks

Customer's city. This property is used as part of the Address Verification Service (AVS) and contains the customer's city as it appears on their monthly statement. Other AVS properties include CustomerAddress, CustomerState, and CustomerZip.

This property is not available at design time.

Data Type

String

CustomerCountry Property (ECheck Component)

Customer's country.

Syntax

__property String CustomerCountry = { read=FCustomerCountry, write=FSetCustomerCountry };

Default Value

""

Remarks

Customer's country. This property contains the country in which the customer is located. Most gateways use a two-letter country code, specified in ISO-3166.

Note: If using this property with the PayFuse gateway, this property should contain the ISO-3166 numeric code instead of the standard two-letter code. For example, the ISO code for the US is "840".

This property is not available at design time.

Data Type

String

CustomerEmail Property (ECheck Component)

Customer's email address.

Syntax

__property String CustomerEmail = { read=FCustomerEmail, write=FSetCustomerEmail };

Default Value

""

Remarks

Customer's email address. This optional property contains the customer's email address.

This property is not available at design time.

Data Type

String

CustomerFax Property (ECheck Component)

Customer's fax number.

Syntax

__property String CustomerFax = { read=FCustomerFax, write=FSetCustomerFax };

Default Value

""

Remarks

Customer's fax number. This optional property contains the customer's fax number.

This property is not available at design time.

Data Type

String

CustomerFirstName Property (ECheck Component)

Customer's first name.

Syntax

__property String CustomerFirstName = { read=FCustomerFirstName, write=FSetCustomerFirstName };

Default Value

""

Remarks

Customer's first name. This property contains the customer's first name.

This property is not available at design time.

Data Type

String

CustomerFullName Property (ECheck Component)

Customer's full name.

Syntax

__property String CustomerFullName = { read=FCustomerFullName, write=FSetCustomerFullName };

Default Value

""

Remarks

Customer's full name. This property contains the customer's full name as it appears on the credit card or bank account. Many gateways use this property in addition to, or instead of, the CustomerFirstName and CustomerLastName properties. If a gateway requires a CustomerFullName and the property is empty, CustomerFullName will be constructed using the contents of CustomerFirstName and CustomerLastName.

This property is not available at design time.

Data Type

String

CustomerId Property (ECheck Component)

Merchant-generated customer Id.

Syntax

__property String CustomerId = { read=FCustomerId, write=FSetCustomerId };

Default Value

""

Remarks

Merchant-generated customer Id. This property contains a merchant-generated customer identification number. This number should be unique for each different customer that places an order with the merchant.

This property is not available at design time.

Data Type

String

CustomerLastName Property (ECheck Component)

Customer's last name.

Syntax

__property String CustomerLastName = { read=FCustomerLastName, write=FSetCustomerLastName };

Default Value

""

Remarks

Customer's last name. This property contains the customer's last name as it appears on their credit card.

This property is not available at design time.

Data Type

String

CustomerPhone Property (ECheck Component)

Customer's phone number.

Syntax

__property String CustomerPhone = { read=FCustomerPhone, write=FSetCustomerPhone };

Default Value

""

Remarks

Customer's phone number. This optional property contains the customer's phone number.

This property is not available at design time.

Data Type

String

CustomerState Property (ECheck Component)

Customer's state.

Syntax

__property String CustomerState = { read=FCustomerState, write=FSetCustomerState };

Default Value

""

Remarks

Customer's state. This property is used as part of the Address Verification Service (AVS) and contains the two character postal abbreviation of the customer's state as it appears on their monthly statement. Other AVS properties include CustomerAddress, CustomerCity, and CustomerZip.

This property is not available at design time.

Data Type

String

CustomerZip Property (ECheck Component)

Customer's zip code (or postal code if outside of the USA).

Syntax

__property String CustomerZip = { read=FCustomerZip, write=FSetCustomerZip };

Default Value

""

Remarks

Customer's zip code (or postal code if outside of the USA). This property is used as part of the Address Verification Service (AVS), and contains the customer's zip code as it appears on their monthly statement. Other AVS properties include CustomerAddress, CustomerCity, and CustomerState.

This property is not available at design time.

Data Type

String

Gateway Property (ECheck Component)

Gateway to process transactions with.

Syntax

__property TibpECheckGateways Gateway = { read=FGateway, write=FSetGateway };

enum TibpECheckGateways {
  ecgwNoGateway=0,
  ecgwAuthorizeNet=1,
  ecgwEprocessing=2,
  ecgwITransact=4,
  ecgwNetBilling=5,
  ecgwPayFlowPro=6,
  ecgwUSAePay=7,
  ecgwPlugNPay=8,
  ecgwPlanetPayment=9,
  ecgwMPCS=10,
  ecgwRTWare=11,
  ecgwECX=12,
  ecgwMerchantAnywhere=15,
  ecgwTrustCommerce=19,
  ecgwPayFuse=21,
  ecgwPayFlowLink=22,
  ecgwOrbital=23,
  ecgwLinkPoint=24,
  ecgwFastTransact=27,
  ecgwNetworkMerchants=28,
  ecgwPRIGate=30,
  ecgwMerchantPartners=31,
  ecgwCyberCash=32,
  ecgwFirstData=33,
  ecgwYourPay=34,
  ecgwACHPayments=35,
  ecgwForte=36,
  ecgwCyberSource=37,
  ecgwGoEMerchant=39,
  ecgwTransFirst=40,
  ecgwChase=41,
  ecgwNexCommerce=42,
  ecgwTransactionCentral=44,
  ecgwSterling=45,
  ecgwSagePayments=50,
  ecgwVerifi=54,
  ecgwQBMS=61,
  ecgwHeartland=62,
  ecgwLitle=63,
  ecgwBrainTree=64,
  ecgwJetPay=65,
  ecgwHSBC=66,
  ecgwBluePay=67,
  ecgwAdyen=68,
  ecgwPayTrace=70,
  ecgwOmniFund=73,
  ecgwTransNationalBankcard=74,
  ecgwNetbanx=75,
  ecgwACHFederal=78,
  ecgwBluefin=82,
  ecgwPayscape=83,
  ecgwPayDirect=84,
  ecgw5thDimension=86,
  ecgwWorldPayLink=87,
  ecgwFirstDataPayPoint=90,
  ecgwAuthorizeNetXML=96,
  ecgwPhoeniXGate=97,
  ecgwRepay=98,
  ecgwBlueSnap=104,
  ecgwBASYS=106,
  ecgwQBPayments=113,
  ecgwHeartlandPortico=116
};

Default Value

ecgwNoGateway

Remarks

This property is used to select the gateway with which transactions will be processed. Setting the Gateway property will also fill the GatewayURL with the URL to the gateway's processing server, and will also fill the SpecialFieldName and SpecialFieldValue properties with default names and values for the selected gateway. These are special configuration values that should usually not be changed. The following table shows the currently supported gateways, as well as the corporate home page for each.

Data Type

Integer

GatewayURL Property (ECheck Component)

Default URL for a specific Gateway .

Syntax

__property String GatewayURL = { read=FGatewayURL, write=FSetGatewayURL };

Default Value

""

Remarks

This property is used to change the default URL for a specific Gateway. This is useful for specifying a different URL for testing purposes, or to support additional gateway processors that share a protocol format (such as additional Authorize.net compatible gateways). Please note that the proper "http://" or "https://" formatting must be observed. Some alternate testing URLs are listed below:

URLs for submitting test transactions: (not supported by all gateways)

Data Type

String

InvoiceNumber Property (ECheck Component)

Merchant-generated invoice number.

Syntax

__property String InvoiceNumber = { read=FInvoiceNumber, write=FSetInvoiceNumber };

Default Value

""

Remarks

This field contains a merchant-generated invoice number. This number should be unique for each transaction. This property is optional for most gateways, but it is recommended that the merchant use an invoice number to keep track of transactions. See the Gateway property to determine if this is a required or optional field for the gateway you are using.

Data Type

String

LicenseDOB Property (ECheck Component)

Customer's Date of Birth as indicated on his driver's license.

Syntax

__property String LicenseDOB = { read=FLicenseDOB, write=FSetLicenseDOB };

Default Value

""

Remarks

This property contains the customer's date of birth as it appears on his driver's license. The format varies between gateways, so please see the specifications for correct formatting. This property may be used by the gateway for fraud screening.

Data Type

String

LicenseNumber Property (ECheck Component)

Customer's drivers license number.

Syntax

__property String LicenseNumber = { read=FLicenseNumber, write=FSetLicenseNumber };

Default Value

""

Remarks

This property contains the customer's drivers license number. This property may be used by the gateway for fraud screening.

Data Type

String

LicenseState Property (ECheck Component)

State in which customer's drivers license was issued.

Syntax

__property String LicenseState = { read=FLicenseState, write=FSetLicenseState };

Default Value

""

Remarks

This property contains the two-digit abbreviated postal code indicating the state in which the customer's drivers license was issued. This property may be used by the gateway for fraud screening.

Data Type

String

MerchantLogin Property (ECheck Component)

Merchant's Gateway login.

Syntax

__property String MerchantLogin = { read=FMerchantLogin, write=FSetMerchantLogin };

Default Value

""

Remarks

This is the login Id supplied by the Gateway you signed up with to process credit card transactions.

Data Type

String

MerchantPassword Property (ECheck Component)

Merchant's Gateway password.

Syntax

__property String MerchantPassword = { read=FMerchantPassword, write=FSetMerchantPassword };

Default Value

""

Remarks

This is the password supplied by the Gateway you signed up with to process credit card transactions. Some gateways require passwords only for Credit or Void transactions, some require it for all transactions, and some do not require this field at all.

Data Type

String

PaymentType Property (ECheck Component)

The type of check payment request (commonly referred to as SEC Code).

Syntax

__property TibpECheckPaymentTypes PaymentType = { read=FPaymentType, write=FSetPaymentType };

enum TibpECheckPaymentTypes {
  ptWEB=0,
  ptPPD=1,
  ptTEL=2,
  ptCCD=3,
  ptARC=4,
  ptBOC=5,
  ptPOP=6,
  ptRCK=7
};

Default Value

ptWEB

Remarks

This property is used to specify the payment type of the check transaction.

Available values:

Data Type

Integer

ProxyAuthScheme Property (ECheck Component)

This property is used to tell the component which type of authorization to perform when connecting to the proxy.

Syntax

__property TibpECheckProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };

enum TibpECheckProxyAuthSchemes {
  authBasic=0,
  authDigest=1,
  authProprietary=2,
  authNone=3,
  authNtlm=4,
  authNegotiate=5
};

Default Value

authBasic

Remarks

This property is used to tell the component which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (ECheck Component)

This property tells the component whether or not to automatically detect and use proxy system settings, if available.

Syntax

__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (ECheck Component)

This property contains a password if authentication is to be used for the proxy.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (ECheck Component)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (ECheck Component)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (ECheck Component)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

__property TibpECheckProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };

enum TibpECheckProxySSLs {
  psAutomatic=0,
  psAlways=1,
  psNever=2,
  psTunnel=3
};

Default Value

psAutomatic

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (ECheck Component)

This property contains a user name, if authentication is to be used for the proxy.

Syntax

__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };

Default Value

""

Remarks

This property contains a user name, if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ResponseApprovalCode Property (ECheck Component)

Contains an authorization code when a transaction has been approved.

Syntax

__property String ResponseApprovalCode = { read=FResponseApprovalCode };

Default Value

""

Remarks

Contains an authorization code when a transaction has been approved. This property contains an authorization code when a transaction has been approved. If the ResponseCode returned indicates that the transaction is not approved, then the contents of this property should be ignored.

This property is read-only and not available at design time.

Data Type

String

ResponseApproved Property (ECheck Component)

Indicates the status of the last transaction.

Syntax

__property bool ResponseApproved = { read=FResponseApproved };

Default Value

false

Remarks

Indicates the status of the last transaction. This property will be True if the last transaction was approved. However, you should not rely solely on the value contained in this property. After every transaction, the ResponseCode should be inspected and evaluated according to the specifications of the Gateway in use. A list of response codes for each gateway is listed in the table of contents. However, it is recommended that the developer acquire the current list from the Gateway which is being used.

This property is read-only and not available at design time.

Data Type

Boolean

ResponseApprovedAmount Property (ECheck Component)

The amount approved for the transaction, this is the amount actually charged to the credit card.

Syntax

__property String ResponseApprovedAmount = { read=FResponseApprovedAmount };

Default Value

""

Remarks

The amount approved for the transaction, this is the amount actually charged to the credit card.

This property is primarily used when gateways allow partial authorizations and AllowPartialAuths is 'True'. Thus this property is not used by all gateways and should not alone be used to determine if a transaction was successful (such as in the case that this property is not populated).

This property is read-only and not available at design time.

Data Type

String

ResponseAVSResult Property (ECheck Component)

Contains the Address Verification System result code.

Syntax

__property String ResponseAVSResult = { read=FResponseAVSResult };

Default Value

""

Remarks

Contains the Address Verification System result code. This one character property contains the Address Verification Service (AVS) result code. An AVS result code can provide additional information concerning the authentication of a particular transaction for which cardholder address verification was requested. An AVS result code of "0" will be returned in the response message when no address verification has been requested. The value returned should be stored for later retrieval, as it may be required when voiding or refunding a transaction. Valid AVS response codes are listed below, and are identical across all Gateway (note that some gateways do not return an AVS response).

Note: Some gateways use their own response codes instead of those in the above table; those response codes are detailed below for such gateways.

Adyen

For Adyen, this property will contain the following possible values:

American Payment Solutions

For American Payment Solutions, this property will contain the following possible values:

Barclay

For Barclay, the property will contain the following possible values:

BlueSnap

For BlueSnap, the property will contain a 3-character string (if AVS checks were done), which contains the AVS checks for the following properties:

The possible values for each result character are:

HSBC

For HSBC, the property will contain the following possible values:

PayTrace / PayTraceJSON

For PayTrace / PayTraceJSON, the property will contain the following possible values:

QBMS

For the QBMS gateway, the ResponseAVSResult property will contain the result for the street address, a comma, and then the result for the zip code. The values returned are "Pass", "Fail", and "NotAvailable". Therefore, an ResponseAVSResult of "Fail,Pass" means that the street address failed validation, but the zip code passed.

DataCash

For DataCash, the property will contain the following possible values (of which correspond to both AVS and CVV checks):

Stripe

For Stripe, the property will contain the following possible values:

Worldpay

For Worldpay, the property will contain a 4-character string, which contains the AVS checks for the following properties:

The possible values for each result character are:

Worldpay Online

For Worldpay Online, the property will contain one of the following:

This property is read-only and not available at design time.

Data Type

String

ResponseCode Property (ECheck Component)

Indicates the status of the authorization request.

Syntax

__property String ResponseCode = { read=FResponseCode };

Default Value

""

Remarks

Indicates the status of the authorization request. This property contains the actual response code as returned by the Gateway. Unlike the ResponseApproved property, this ResponseCode property may provide more details about why a transaction was declined. Therefore, it is recommended that developers check the ResponseCode as well as the ResponseApproved property. The Point of Sale system should evaluate this response code and NOT the ResponseText to determine nature of a response message. The current (at the time of this release) response codes for the supported Gateways are listed in the table of contents to your left.

This property is read-only and not available at design time.

Data Type

String

ResponseCVVResult Property (ECheck Component)

Contains the returned CVV2 result code if it was requested.

Syntax

__property String ResponseCVVResult = { read=FResponseCVVResult };

Default Value

""

Remarks

Contains the returned CVV2 result code if it was requested. This property contains the host returned CVV2 result code (if CVV data was sent in the request). The following is a list of current result codes:

A gateway may also support custom codes or human-readable response messages in this property. Please consult your gateway documentation to determine if CVV2 codes are supported.

Note: Some gateways use their own response codes instead of those in the above table; those response codes are detailed below for such gateways.

HSBC

For HSBC, the property will contain:

Adyen

For Adyen, the property will contain:

Barclay

For Barclay, the property will contain:

BlueSnap

For BlueSnap, the property will contain:

(Note: There are some scenarios in which the property will be empty instead, refer to BlueSnap's documentation for more details.)

DataCash

For DataCash, the property will contain the following possible values (of which correspond to both AVS and CVV checks):

Stripe

For Stripe, the property will contain the following possible values:

Worldpay Online

For Worldpay Online, the property will contain one of the following:

This property is read-only and not available at design time.

Data Type

String

ResponseData Property (ECheck Component)

The entire response returned from the gateway processor.

Syntax

__property String ResponseData = { read=FResponseData };

Default Value

""

Remarks

The entire response returned from the gateway processor. This property contains the entire response returned from the gateway processor. You may use this to parse additional information that is not returned in the standard response properties.

This property is read-only and not available at design time.

Data Type

String

ResponseErrorCode Property (ECheck Component)

Additional error code returned by some gateways.

Syntax

__property String ResponseErrorCode = { read=FResponseErrorCode };

Default Value

""

Remarks

Additional error code returned by some gateways. If a gateway returns it, this property will contain an additional code that may explain why the transaction was declined. You may also wish to inspect ResponseErrorText for a human-readable description of this ResponseErrorCode.

This property is read-only and not available at design time.

Data Type

String

ResponseErrorText Property (ECheck Component)

Additional error description returned by some gateways.

Syntax

__property String ResponseErrorText = { read=FResponseErrorText };

Default Value

""

Remarks

Additional error description returned by some gateways. If a gateway returns it, this property will contain a human-readable description of the error which occurred (if any). You may also wish to inspect ResponseErrorCode for an accompanying code which may be parsed and used by your application.

This property is read-only and not available at design time.

Data Type

String

ResponseInvoiceNumber Property (ECheck Component)

Invoice number submitted in authorization request (if applicable).

Syntax

__property String ResponseInvoiceNumber = { read=FResponseInvoiceNumber };

Default Value

""

Remarks

Invoice number submitted in authorization request (if applicable). This property contains the Invoice Number submitted in the original transaction, echoed back by the Gateway host.

This property is read-only and not available at design time.

Data Type

String

ResponseProcessorCode Property (ECheck Component)

Response code from the underlying processor.

Syntax

__property String ResponseProcessorCode = { read=FResponseProcessorCode };

Default Value

""

Remarks

Response code from the underlying processor. Often times a Gateway will return a ResponseCode that indicates only whether the transaction is approved or declined. Many of these also include a secondary code that provides more details as to why the transaction was declined.

Note, for the PayFlowPro Gateway this property will contain a "1" if the transaction was a duplicate, a "-1" if duplicate checking service is unavailable, and will be blank for a successfully authorized transaction.

This property is read-only and not available at design time.

Data Type

String

ResponseText Property (ECheck Component)

Text information that describes each response code.

Syntax

__property String ResponseText = { read=FResponseText };

Default Value

""

Remarks

Text information that describes each response code. This property contains a response or display text message. This message can be used by the terminal to display the authorization result. The display text must not be used to determine the nature of a response message. A Gateway may translate the response according to the language indicated in the merchant account setup (if applicable).

This property is read-only and not available at design time.

Data Type

String

ResponseTransactionId Property (ECheck Component)

Contains the Visa Transaction Identifier or MasterCard Reference Number.

Syntax

__property String ResponseTransactionId = { read=FResponseTransactionId };

Default Value

""

Remarks

Contains the Visa Transaction Identifier or MasterCard Reference Number. This property contains a transaction identifier or reference number. The Point of Sale (POS) device should not attempt to interpret the meaning of any data appearing in this property. Data returned in this property (if any) should be recorded and used to submit a modification of this transaction at a later time (such as voiding the transaction or capturing an authorization-only transaction, if applicable).

This property is read-only and not available at design time.

Data Type

String

SpecialFieldCount Property (ECheck Component)

The number of records in the SpecialField arrays.

Syntax

__property int SpecialFieldCount = { read=FSpecialFieldCount, write=FSetSpecialFieldCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SpecialFieldName
• SpecialFieldValue

The array indices start at 0 and end at SpecialFieldCount - 1.

This property is not available at design time.

Data Type

Integer

SpecialFieldName Property (ECheck Component)

Name of special configuration property to submit in this transaction.

Syntax

__property String SpecialFieldName[int FieldIndex] = { read=FSpecialFieldName, write=FSetSpecialFieldName };

Default Value

""

Remarks

Name of special configuration field to submit in this transaction. The SpecialFieldName and SpecialFieldValue properties can be used to send special gateway configuration and transaction properties for each transaction. These properties can also be used to extend the functionality of this component by submitting additional information to the gateway.

This property is not applicable for the LinkPoint, FirstData, YourPay, PayFuse, or Orbital gateways.

The FieldIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SpecialFieldCount property.

This property is not available at design time.

Data Type

String

SpecialFieldValue Property (ECheck Component)

Value of special configuration property to submit in this transaction.

Syntax

__property String SpecialFieldValue[int FieldIndex] = { read=FSpecialFieldValue, write=FSetSpecialFieldValue };

Default Value

""

Remarks

Value of special configuration field to submit in this transaction. The SpecialFieldName and SpecialFieldValue properties can be used to send special gateway configuration and transaction properties for each transaction. These properties can also be used to extend the functionality of this component by submitting additional information to the gateway.

Note: This property is not applicable for the LinkPoint, FirstData, YourPay, PayFuse, or Orbital gateways.

The FieldIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SpecialFieldCount property.

This property is not available at design time.

Data Type

String

SSLAcceptServerCertEncoded Property (ECheck Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEncoded Property (ECheck Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (ECheck Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (ECheck Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (ECheck Component)

This is the type of certificate store for this certificate.

Syntax

__property TibpECheckSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TibpECheckSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (ECheck Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properites are set. When this property is set, a search is performed in the current certificate store certificate with matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

If a field value contains a comma it must be quoted.

Data Type

String

SSLProvider Property (ECheck Component)

This specifies the SSL/TLS implementation to use.

Syntax

__property TibpECheckSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TibpECheckSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

Additional Notes

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (ECheck Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

TaxId Property (ECheck Component)

Company's Tax Id or a Customer's Social Security Number.

Syntax

__property String TaxId = { read=FTaxId, write=FSetTaxId };

Default Value

""

Remarks

This property contains a Company's Tax Id or a Customer's Social Security Number. In the absence of driver's license information, this property may be used by the gateway for fraud screening.

Data Type

String

TestMode Property (ECheck Component)

Turns test mode on and off for transactions sent to the current Gateway .

Syntax

__property bool TestMode = { read=FTestMode, write=FSetTestMode };

Default Value

false

Remarks

You can use this property to set a test mode flag that will be sent in an authorization request. Not all Gateways support test modes. If you set the TestMode property to True and the current Gateway does not support it, the component will raises an exception.

Data Type

Boolean

Timeout Property (ECheck Component)

A timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

30

Remarks

If Timeout is set to a positive value, and an operation cannot be completed immediately, the component will retry the operation for a maximum of Timeout seconds.

The default value for Timeout is 30 (seconds).

Data Type

Integer

TransactionAmount Property (ECheck Component)

Purchase amount for an authorization or retry transaction. Not used for reversals.

Syntax

__property String TransactionAmount = { read=FTransactionAmount, write=FSetTransactionAmount };

Default Value

""

Remarks

This field contains the transaction amount to be authorized. Gateways may have differing requirements for how the TransactionAmount should be formatted, so refer to the ECheck Gateway Setup page for details on the gateway you are using.

Data Type

String

TransactionDesc Property (ECheck Component)

Description of goods purchased.

Syntax

__property String TransactionDesc = { read=FTransactionDesc, write=FSetTransactionDesc };

Default Value

""

Remarks

This field contains a description of the goods or services being purchased. Please see the "ICharge Gateway Setup and Required Properties" page to determine if this is a required or optional field for the gateway you are using.

Data Type

String

TransactionId Property (ECheck Component)

Merchant-generated transaction Id used for all transactions.

Syntax

__property String TransactionId = { read=FTransactionId, write=FSetTransactionId };

Default Value

""

Remarks

This property is used to send a merchant-generated transaction id to the Gateway, if the gateway supports that feature.

Data Type

String

AddSpecialField Method (ECheck Component)

Adds a special field name and the corresponding value.

Syntax

void __fastcall AddSpecialField(String Name, String Value);

Remarks

Please refer to the SpecialFieldName and SpecialFieldValue properties for more information on form variables and how they are managed.

Authorize Method (ECheck Component)

Initiates a check authorization transaction.

Syntax

void __fastcall Authorize();

Remarks

This method sends an authorization request to the specified Gateway.

Config Method (ECheck Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Credit Method (ECheck Component)

Credits a previous ACH transaction.

Syntax

void __fastcall Credit(String TransactionId, String CreditAmount);

Remarks

This method credits a previous ACH authorization. The TransactionId parameter indicates to the Gateway which transaction is to be voided, and should contain the ResponseTransactionId from the original transaction. The CreditAmount parameter is the value to be credited back to the customer, and can be all or part of the original TransactionAmount. The bank account indicated by BankRoutingNumber and BankAccountNumber must be identical to the original authorized transaction.

The following gateways support credit transactions:

DoEvents Method (ECheck Component)

Processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

GetResponseVar Method (ECheck Component)

Parses additional information out of the response.

Syntax

String __fastcall GetResponseVar(String Name);

Remarks

Due to the fact that this component supports so many gateways, only the most commonly used response variables are parsed into the Response properties. Any additional response information contained within the ResponseData may be retrieved with this GetResponseVar method. There are three formats for the ResponseData returned by the gateways this component supports: Name/value pairs, delimited list, or XML. The value you pass in the Name parameter changes based on these formats, as detailed below:

If the ResponseData property contains name/value pairs, pass the name in the Name parameter and this method will return the value. For instance, if ResponseData contains "ResponseCode=00&FraudScore=53&ApprovalCode=123456&...", calling GetResponseVar("FraudScore") will return "53".

However, if ResponseData contains a delimited list, pass the index of the field you wish to receive. For instance, if ResponseData contains "00|53|123456|...", calling GetResponseVar("1") will return "53".

Finally, if ResponseData contains XML, pass the xpath to the value you wish to receive. For instance, if ResponseData contains "<Response><Code>00</Code><FraudScore>53</FraudScore><ApprovalCode>123456</ApprovalCode></Response>", calling GetResponseVar("/Response/FraudScore") will return "53".

Interrupt Method (ECheck Component)

Interrupts the current action.

Syntax

void __fastcall Interrupt();

Remarks

This method interrupts any processing that the component is currently executing.

Reset Method (ECheck Component)

Clears all properties to their default values.

Syntax

void __fastcall Reset();

Remarks

This method clears all properties to their default values and returns the component to its default state.

ResetSpecialFields Method (ECheck Component)

Resets all special fields to the default settings.

Syntax

void __fastcall ResetSpecialFields();

Remarks

This function resets all special gateway configuration fields to the default settings for the specified Gateway.

Please refer to the SpecialFieldName and SpecialFieldValue properties for more information on form variables and how they are managed.

VoidTransaction Method (ECheck Component)

Voids a previously authorized transaction.

Syntax

void __fastcall VoidTransaction(String TransactionId);

Remarks

This method voids a transaction that has been previously authorized, but which has not yet gone to settlement, or been "captured". The TransactionId parameter indicates to the Gateway which transaction is to be voided, and should contain the ResponseTransactionId from the original transaction.

Please see the gateway information in the table of contents to determine if your gateway supports Void transactions.

To cancel a transaction which has already been captured, use the Credit method.

The LinkPoint gateway requires you send the ResponseInvoiceNumber rather than the ResponseTransactionId. For the PSIGateXML Gateway, send the ResponseTransactionId as normal.

Error Event (ECheck Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TibpECheckErrorEventParams;
typedef void __fastcall (__closure *TibpECheckErrorEvent)(System::TObject* Sender, TibpECheckErrorEventParams *e);
__property TibpECheckErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (ECheck Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TibpECheckSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TibpECheckSSLServerAuthenticationEvent)(System::TObject* Sender, TibpECheckSSLServerAuthenticationEventParams *e);
__property TibpECheckSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (ECheck Component)

Shows the progress of the secure connection.

Syntax

typedef struct {
  String Message;
} TibpECheckSSLStatusEventParams;
typedef void __fastcall (__closure *TibpECheckSSLStatusEvent)(System::TObject* Sender, TibpECheckSSLStatusEventParams *e);
__property TibpECheckSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Config Settings (ECheck Component)

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Trappable Errors (ECheck Component)

ECheck Errors

	159   Invalid form variable index (out of range).
	501   Data field invalid length.
	502   Data field invalid format.
	503   Data field out of range.
	510   No gateway specified.
	511   Invalid data entered.
	512   Truncated response.
	513   Invalid response.
	514   A Special Field is required for this transaction type.
	542   Error computing MD5 hash