Bill Class

Properties Methods Events Config Settings Errors

A Bill indicates that the QuickBooks company owes money to a VENDOR . A Bill is the opposite of a VENDORCREDIT .

Class Name

InQB_Bill

Procedural Interface

 inqb_bill_open();
 inqb_bill_close($res);
 inqb_bill_register_callback($res, $id, $function);
 inqb_bill_get_last_error($res);
 inqb_bill_get_last_error_code($res);
 inqb_bill_set($res, $id, $index, $value);
 inqb_bill_get($res, $id, $index);
 inqb_bill_do_add($res);
 inqb_bill_do_cancel($res);
 inqb_bill_do_checkrequeststatus($res, $requestid);
 inqb_bill_do_closeqbconnection($res);
 inqb_bill_do_config($res, $configurationstring);
 inqb_bill_do_delete($res);
 inqb_bill_do_get($res, $id);
 inqb_bill_do_getcustomfield($res, $fieldname);
 inqb_bill_do_importqbxml($res, $xmldata);
 inqb_bill_do_openqbconnection($res);
 inqb_bill_do_reset($res);
 inqb_bill_do_setcustomfield($res, $fieldname, $fieldvalue);
 inqb_bill_do_update($res);

Remarks

The Bill class represents a bill received from a Vendor. When a bill is added, the total amount is automatically entered into the Accounts Payable register.

Required Fields (Add): Vendor*, TransactionDate, Items or Expenses

Supported Methods: Add, Get (Id), Cancel, Delete

Example Bill1.VendorName = "ACME Inc." '* Bill1.TransactionDate = "1/17/03" Bill1.DueDate = "2/01/03" Bill1.ItemCount = 1 Bill1.ItemName(0) = "ACME Widget X" '* Bill1.ItemAmount(0) = "299.95" Bill1.ExpenseCount = 1 Bill1.ExpenseAccountName(0) = "Shipping" '* Bill1.ExpenseAmount(0) = "12.00" Bill1.Add() '*: Item must already exist in QuickBooks.

Amount is the total of the item lines and (if present) expense lines. It is computed automatically, and should never be set.

Item Lines: Item lines are used to track the purchase of goods or services. Line items may be added by first setting ItemCount. Then, for each line set the Item ID (or Name), Cost, Quantity, Description, Class, Customer, and Amount.

Note: For advanced users, the entire XML item structure may be set and retrieved through the Item's Aggregate property. However, it is up to the developer to ensure that this aggregate is formatted correctly.

Expense Lines: Expense lines are used to track portions of the total amount to expense accounts. To add expense lines to the transaction, first set ExpenseCount. This will initialize the Expenses array. Each expense will be tracked to the account specified in ExpenseAccount. The ExpenseAmount should also be specified for each expense; optionally, the ExpenseClass, ExpenseCustomer, and ExpenseMemo properties may be set as well.

The class supports a variety of other operations as well. The class's Get, Cancel, and Delete methods may be used to retrieve, cancel, and delete Bills, respectively. The ObjSearch Class may be used to search for Bills in the QuickBooks database.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


Amount	Amount of transaction.
APAccountId	Reference to the Accounts Payable account where money goes.
APAccountName	Reference to the Accounts Payable account.
DueDate	Date when payment is due.
ExpenseCount	The number of records in the Expense arrays.
ExpenseAccountId	A reference to the account to which this expense is be charged.
ExpenseAccountName	A reference to the account to which this expense is be charged.
ExpenseAmount	The total amount of this expense line.
ExpenseBillableStatus	The billing status of this expense line.
ExpenseClassId	A reference to the class of this expense.
ExpenseClassName	A reference to the class of this expense.
ExpenseCustomerId	The customer associated with this expense line.
ExpenseCustomerName	The customer associated with this expense line.
ExpenseLineId	Identification number of the expense line, used for Updates.
ExpenseMemo	A memo for this expense line, which will appear to the QuickBooks user only.
ExpenseTaxCodeId	Line item property: Sales tax information for this item.
ExpenseTaxCodeName	Line item property: Sales tax information for this item.
IncludeLinkedTxns	Indicates whether to include linked transactions in the response.
IsPaid	Indicates whether this bill has been paid.
ItemCount	The number of records in the Item arrays.
ItemAggregate	Contains an XML aggregate of the line item.
ItemAmount	Line item property: the total amount of this item.
ItemBillableStatus	Line item property: Billing status of this item.
ItemClassId	Line item property: Reference to the class of the item.
ItemClassName	Line item property: Reference to the class of the item.
ItemCost	Line item property: Unit cost for item.
ItemCustomerId	Line item property: A reference to customer for whom the item was ordered.
ItemCustomerName	Line item property: A reference to customer for whom the item was ordered.
ItemDescription	Line item property: Description of item.
ItemGroupId	Reference to a group of line items.
ItemGroupName	Reference to a group of line items.
ItemId	Line item property: Reference to the kind of item.
ItemName	Line item property: Reference to the kind of item.
ItemLineId	Identification number of the transaction line, used for Updates.
ItemOverrideAccountId	An account which will override the default account for the line item.
ItemOverrideAccountName	An account which will override the default account for the line item.
ItemQuantity	Line item property: Quantity of item or item group.
ItemTaxCodeId	Line item property: Sales tax information for this item.
ItemTaxCodeName	Line item property: Sales tax information for this item.
ItemUnitOfMeasure	Unit of measure describing the Quantity .
LinkedTxnCount	The number of records in the LinkedTxn arrays.
LinkedTxnAmount	The amount of the linked transaction.
LinkedTxnDate	The date of the linked transaction.
LinkedTxnLinkType	Indicates the nature of the link between the transactions.
LinkedTxnRefNumber	This is the reference number assigned to the linked transaction.
LinkedTxnId	This property can be used by another class to reference the original transaction which is linked to the current response.
LinkedTxnType	This property indicates which type of linked transaction has been returned.
LinkToTxnId	The LinkToTxnId property allows you to link to an entire transaction, pulling in all of its line items.
Memo	Memo to appear on internal reports only.
QBConnectionString	An aggregate consisting of various QuickBooks connection properties.
QBRequestAggregate	The request aggregate.
QBRequestId	The Id of the next message to be sent to QuickBooks.
QBRequestMode	Defines whether the request is made online or stored offline.
QBResponseAggregate	The last QBXML response aggregate received from QuickBooks.
QBXMLVersion	The version of QBXML used in the outgoing message.
RefId	An alphanumerical identifier generated by the server.
RefNumber	Reference number for the transaction.
TermsId	Reference to terms of payment.
TermsName	Reference to terms of payment.
TransactionDate	Date of transaction.
VendorId	Reference to the vendor for this transaction.
VendorName	Reference to the vendor for this transaction.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


Add	Adds the record into QuickBooks.
Cancel	Cancels (voids) the transaction.
CheckRequestStatus	Checks whether or not the specified request was processed by QuickBooks.
CloseQBConnection	Closes a persistent connection to QuickBooks.
Config	Sets or retrieves a configuration setting.
Delete	Deletes the record from QuickBooks.
Get	Gets a single record from QuickBooks.
GetCustomField	Gets a custom field value from QuickBooks.
ImportQBXML	Imports a QBXML response aggregate.
OpenQBConnection	Opens a persistent connection to QuickBooks.
Reset	Resets all properties to their defaults.
SetCustomField	Sets a custom field value within QuickBooks.
Update	Updates the bill in QuickBooks.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


Error	Information about errors during data delivery.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Shows the progress of the secure connection.
Status	Shows the progress of the QuickBooks connection.
Warning	Fired when a warning occurs.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


AppendAfter	Appends an XML tag after the specified QBXML element.
AuthFlags	Connection Flags (use for QuickBooks Simple Start).
EditSequence	An identifier for this copy of the object.
EnforceMaxLength	Indicates whether to enforce max lengths for QB Fields.
ExchangeRate	Indicates the exchange rate for the transaction.
ExpenseLineAggregate[index]	Contains the XML aggregate of the expense line item.
GetHighestVersion	Highest QBXMLVersion supported by the installed instance of QuickBooks.
GetRequestProcessorDLLVersion	Returns the version of the QB Request Processor that is installed on your system.
GetSupportedVersions	Returns a list of QBXMLVersions that are supported by QuickBooks.
IsReadOnly	This causes the QuickBooks authorization dialog to display text informing the user that its access will be read-only.
Items[index].OverrideItemAccountId	An account which will override the default account for the line item.
Items[index].OverrideItemAccountName	An account which will override the default account for the line item.
PersonalDataPref	Whether the connecting application will require access to personal data such as SSN or credit card information.
QBConnectionMode	The mode of connection to QuickBooks.
QBFileStatus	The status of the company file as it pertains to accepting connections.
QBOpenCompanyFile	The file currently open in QuickBooks.
SendRawXML	Sends specified XML to quickbooks without modification.
SSLAcceptServerCert	The SSL certificate being used by the QuickBooks Gateway (aka Remote Connector).
SSLAcceptServerCertFile	The SSL certificate file being used by the QuickBooks Gateway (aka Remote Connector).
StopOnError	Specifies how QuickBooks is to proceed if an error occurs in processing of the current request.
Tax1Total	Canadian field used for Goods and Services Tax, or GST.
Tax2Total	Canadian field used for Provincial Sales Taxes, or PST.
TimeCreated	The time the object was created.
TimeModified	The time the object was created.
UnattendedModePref	Whether connecting while QuickBooks is closed is required or optional for the user.
WarningCodes	A comma-separated list of QuickBooks warning codes that should not result in an exception.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
ProcessIdleEvents	Whether the class uses its internal event loop to process events when the main thread is idle.
SelectWaitMillis	The length of time in milliseconds the class will wait when DoEvents is called if there are no events to process.
UseInternalSecurityAPI	Tells the class whether or not to use the system security libraries or an internal implementation.

Amount Property (InQB_Bill Class)

Amount of transaction.

Object Oriented Interface


public function getAmount();

Procedural Interface


inqb_bill_get($res, 1 );

Default Value

Remarks

The amount of the transaction. Amount will be total of the amounts in the item lines and (if present) expense lines.

The amount should be formatted as a string in dollars.

This property is read-only.

Data Type

String

APAccountId Property (InQB_Bill Class)

Reference to the Accounts Payable account where money goes.

Object Oriented Interface


public function getAPAccountId();


public function setAPAccountId($value);

Procedural Interface


inqb_bill_get($res, 2 );


inqb_bill_set($res, 2, $value );

Default Value

Remarks

A reference to the Accounts Payable account where the money received from this transaction will go.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Data Type

String

APAccountName Property (InQB_Bill Class)

Reference to the Accounts Payable account.

Object Oriented Interface


public function getAPAccountName();


public function setAPAccountName($value);

Procedural Interface


inqb_bill_get($res, 3 );


inqb_bill_set($res, 3, $value );

Default Value

Remarks

A reference to the Accounts Payable account where the money received from this transaction will go.

Name/Id Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its full Name (this property) or its Id, for which a corresponding property is defined. If Name is used, it must contain the full name of the object referred to, as generated by QuickBooks. For hierarchically defined objects, such as Customers, this includes the names of parent objects, and the full name can be determined by reading the FullName special field.

Setting the value of this property will set the corresponding Id property to an empty string.

Data Type

String

DueDate Property (InQB_Bill Class)

Date when payment is due.

Object Oriented Interface


public function getDueDate();


public function setDueDate($value);

Procedural Interface


inqb_bill_get($res, 4 );


inqb_bill_set($res, 4, $value );

Default Value

Remarks

Appears in a variety of transactions. The date when payment is due.

The standard formatting for dates is YYYY-MM-DD; i.e., September 2, 2002 is formatted as 2002-09-02. When getting the value of a date property, the date will always be in this format.

When setting the value of a date property, the formats MM-DD-YY, MM-DD-YYYY, MM/DD/YY, and MM/DD/YYYY are also acceptable. Dates in these formats will be automatically parsed and stored in YYYY-MM-DD format.

Data Type

String

ExpenseCount Property (InQB_Bill Class)

The number of records in the Expense arrays.

Object Oriented Interface


public function getExpenseCount();


public function setExpenseCount($value);

Procedural Interface


inqb_bill_get($res, 5 );


inqb_bill_set($res, 5, $value );

Default Value

Remarks

This property controls the size of the following arrays:

ExpenseAccountId
ExpenseAccountName
ExpenseAmount
ExpenseBillableStatus
ExpenseClassId
ExpenseClassName
ExpenseCustomerId
ExpenseCustomerName
ExpenseLineId
ExpenseMemo
ExpenseTaxCodeId
ExpenseTaxCodeName

The array indices start at 0 and end at ExpenseCount - 1.

This property is not available at design time.

Data Type

Integer

ExpenseAccountId Property (InQB_Bill Class)

A reference to the account to which this expense is be charged.

Object Oriented Interface


public function getExpenseAccountId($expenseindex);


public function setExpenseAccountId($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 6 , $expenseindex);


inqb_bill_set($res, 6, $value , $expenseindex);

Default Value

Remarks

A reference to the account to which this expense is be charged. Either ExpenseAccountName or ExpenseAccountId (but not both) may be used to specify the Account. For example, an ExpenseAccountName of "Rent".

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseAccountName Property (InQB_Bill Class)

A reference to the account to which this expense is be charged.

Object Oriented Interface


public function getExpenseAccountName($expenseindex);


public function setExpenseAccountName($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 7 , $expenseindex);


inqb_bill_set($res, 7, $value , $expenseindex);

Default Value

Remarks

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseAmount Property (InQB_Bill Class)

The total amount of this expense line.

Object Oriented Interface


public function getExpenseAmount($expenseindex);


public function setExpenseAmount($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 8 , $expenseindex);


inqb_bill_set($res, 8, $value , $expenseindex);

Default Value

Remarks

The total amount of this expense line. The amount should be formatted as a string in dollars.

About Expenses:

In payment transactions (a Bill, a VendorCredit, a CCCharge, a CCCredit, or a Check) the payment may be tracked through Items and/or Expenses. A set of array properties is available for each. Expense lines are used to charge regularly occurring expenses such as freight charges, rent, etc., to an ExpenseAccount.

Expense line items consist of an ExpenseAccount (Name or Id), an ExpenseAmount, an ExpenseClass (Name or Id), an ExpenseCustomer (Name or Id), and an ExpenseMemo. The number of expense lines is given by ExpenseCount.

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseBillableStatus Property (InQB_Bill Class)

The billing status of this expense line.

Object Oriented Interface


public function getExpenseBillableStatus($expenseindex);


public function setExpenseBillableStatus($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 9 , $expenseindex);


inqb_bill_set($res, 9, $value , $expenseindex);

Default Value

Remarks

The billing status of this expense line.

If the billing status is empty (that is, if no billing status appears in QuickBooks), then BillableStatus will be bsEmpty

Values:

bsEmpty (0)
bsBillable (1)
bsNotBillable (2)
bsHasBeenBilled (3)

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

Integer

ExpenseClassId Property (InQB_Bill Class)

A reference to the class of this expense.

Object Oriented Interface


public function getExpenseClassId($expenseindex);


public function setExpenseClassId($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 10 , $expenseindex);


inqb_bill_set($res, 10, $value , $expenseindex);

Default Value

Remarks

A reference to the class of this expense. The class may be specified by either ExpenseClassName or ExpenseClassId. This property is only used if class tracking is being done with the QuickBooks company.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseClassName Property (InQB_Bill Class)

A reference to the class of this expense.

Object Oriented Interface


public function getExpenseClassName($expenseindex);


public function setExpenseClassName($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 11 , $expenseindex);


inqb_bill_set($res, 11, $value , $expenseindex);

Default Value

Remarks

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseCustomerId Property (InQB_Bill Class)

The customer associated with this expense line.

Object Oriented Interface


public function getExpenseCustomerId($expenseindex);


public function setExpenseCustomerId($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 12 , $expenseindex);


inqb_bill_set($res, 12, $value , $expenseindex);

Default Value

Remarks

The customer associated with this expense line.

Either ExpenseCustomerName or ExpenseCustomerId may reference to a Customer for this expense line.

If this property is set, the expense will be set as billable to the Customer referenced.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseCustomerName Property (InQB_Bill Class)

The customer associated with this expense line.

Object Oriented Interface


public function getExpenseCustomerName($expenseindex);


public function setExpenseCustomerName($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 13 , $expenseindex);


inqb_bill_set($res, 13, $value , $expenseindex);

Default Value

Remarks

The customer associated with this expense line.

Either ExpenseCustomerName or ExpenseCustomerId may reference to a Customer for this expense line.

If this property is set, the expense will be set as billable to the Customer referenced.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseLineId Property (InQB_Bill Class)

Identification number of the expense line, used for Updates.

Object Oriented Interface


public function getExpenseLineId($expenseindex);


public function setExpenseLineId($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 14 , $expenseindex);


inqb_bill_set($res, 14, $value , $expenseindex);

Default Value

Remarks

Identification number of the expense line, used for Updates.

If you need to add a new expense line in a transaction Update request, you can do so by setting the ExpenseLineId to -1.

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseMemo Property (InQB_Bill Class)

A memo for this expense line, which will appear to the QuickBooks user only.

Object Oriented Interface


public function getExpenseMemo($expenseindex);


public function setExpenseMemo($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 15 , $expenseindex);


inqb_bill_set($res, 15, $value , $expenseindex);

Default Value

Remarks

A memo for this expense line, which will appear to the QuickBooks user only.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseTaxCodeId Property (InQB_Bill Class)

Line item property: Sales tax information for this item.

Object Oriented Interface


public function getExpenseTaxCodeId($expenseindex);


public function setExpenseTaxCodeId($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 16 , $expenseindex);


inqb_bill_set($res, 16, $value , $expenseindex);

Default Value

Remarks

Line item property: Sales tax information for this item.

This is a reference to a sales tax code predefined within QuickBooks.

By default, two standard TaxCodes exist: "TAX", or Taxable Sales, and "NON", or Non-Taxable Sales. The QuickBooks user may also define custom tax codes.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

ExpenseTaxCodeName Property (InQB_Bill Class)

Line item property: Sales tax information for this item.

Object Oriented Interface


public function getExpenseTaxCodeName($expenseindex);


public function setExpenseTaxCodeName($expenseindex, $value);

Procedural Interface


inqb_bill_get($res, 17 , $expenseindex);


inqb_bill_set($res, 17, $value , $expenseindex);

Default Value

Remarks

Line item property: Sales tax information for this item.

This is a reference to a sales tax code predefined within QuickBooks.

By default, two standard TaxCodes exist: "TAX", or Taxable Sales, and "NON", or Non-Taxable Sales. The QuickBooks user may also define custom tax codes.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

About Expenses:

The $expenseindex parameter specifies the index of the item in the array. The size of the array is controlled by the ExpenseCount property.

This property is not available at design time.

Data Type

String

IncludeLinkedTxns Property (InQB_Bill Class)

Indicates whether to include linked transactions in the response.

Object Oriented Interface


public function getIncludeLinkedTxns();


public function setIncludeLinkedTxns($value);

Procedural Interface


inqb_bill_get($res, 18 );


inqb_bill_set($res, 18, $value );

Default Value

false

Remarks

If you set IncludeLinkedTxns to true, then the returned object will include a list of all the transactions linked to the queried object (this list is similar to the History view of a transaction in the user interface, but not identical, as the SDK list contains only linked transactions, not items). Each linked transaction will be represented by a LinkedTxn aggregate, which will be parsed by the class into the following properties:

LinkedTxnCount
LinkedTxnAmount
LinkedTxnDate
LinkedTxnId
LinkedTxnLinkType
LinkedTxnRefNumber
LinkedTxnType

Data Type

Boolean

IsPaid Property (InQB_Bill Class)

Indicates whether this bill has been paid.

Object Oriented Interface


public function getIsPaid();

Procedural Interface


inqb_bill_get($res, 19 );

Default Value

false

Remarks

This property is only returned if the QBXMLVersion is set to "2.0" or higher.

This property is read-only.

Data Type

Boolean

ItemCount Property (InQB_Bill Class)

The number of records in the Item arrays.

Object Oriented Interface


public function getItemCount();


public function setItemCount($value);

Procedural Interface


inqb_bill_get($res, 20 );


inqb_bill_set($res, 20, $value );

Default Value

Remarks

This property controls the size of the following arrays:

ItemAggregate
ItemAmount
ItemBillableStatus
ItemClassId
ItemClassName
ItemCost
ItemCustomerId
ItemCustomerName
ItemDescription
ItemGroupId
ItemGroupName
ItemId
ItemLineId
ItemName
ItemOverrideAccountId
ItemOverrideAccountName
ItemQuantity
ItemTaxCodeId
ItemTaxCodeName
ItemUnitOfMeasure

The array indices start at 0 and end at ItemCount - 1.

This property is not available at design time.

Data Type

Integer

ItemAggregate Property (InQB_Bill Class)

Contains an XML aggregate of the line item.

Object Oriented Interface


public function getItemAggregate($itemindex);


public function setItemAggregate($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 21 , $itemindex);


inqb_bill_set($res, 21, $value , $itemindex);

Default Value

Remarks

Contains an XML aggregate of the line item. If the line item has not been modified since receiving a response from QuickBooks, the exact LineRet aggregate that QuickBooks returned will be contained in this XML aggregate. However, if you have made changes to the this line item's properties the ItemAggregate property will re-generate the line item XML with the new data.

If you set the other line item properties and then query the ItemAggregate, a LineRet aggregate will be generated from the currently set properties.

You may set this property with raw xml. So long as you do not modify any other properties (forcing the line item to regenerate based on new changes), the xml will be sent as-is to the QuickBooks request processor. It is essential that you properly format the XML that you place in this property. When setting this property manually, the class will send exactly what you have set. You must ensure your xml is appropriate for the action you are attempting. For instance, if you are Adding an Invoice, you must ensure the outer tags are "InvoiceLineAdd". If Modifying an Invoice, the outer tags must be "InvoiceLineMod".

If you do not expressly set the ItemAggregate field with your own custom XML, all of this will be taken care of you automatically by the class.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemAmount Property (InQB_Bill Class)

Line item property: the total amount of this item.

Object Oriented Interface


public function getItemAmount($itemindex);


public function setItemAmount($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 22 , $itemindex);


inqb_bill_set($res, 22, $value , $itemindex);

Default Value

Remarks

Line item property: the total amount of this item.

This property represents the total amount of a transaction line. If ItemRate, ItemCost and/or ItemQuantity are specified the ItemAmount will be automatically computed by QuickBooks.

Whether ItemRate or ItemCost is used will depend on the transaction type. ItemRate is available for CreditMemo, Estimate, Invoice, PurchaseOrder, SalesOrder, and SalesReceipt transactions while ItemCost is available for Bill, CCCharge, CCCredit, Check, ItemReceipt, and VendorCredit transactions.

The amount should be formatted as a string in dollars.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemBillableStatus Property (InQB_Bill Class)

Line item property: Billing status of this item.

Object Oriented Interface


public function getItemBillableStatus($itemindex);


public function setItemBillableStatus($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 23 , $itemindex);


inqb_bill_set($res, 23, $value , $itemindex);

Default Value

Remarks

Line item property: Billing status of this item.

The billing status of this line item. If the billing status is empty (that is, if no billing status appears in QuickBooks), then no ItemBillableStatus value will be returned.

Values:

bsEmpty (0)
bsBillable (1)
bsNotBillable (2)
bsHasBeenBilled (3)

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

Integer

ItemClassId Property (InQB_Bill Class)

Line item property: Reference to the class of the item.

Object Oriented Interface


public function getItemClassId($itemindex);


public function setItemClassId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 24 , $itemindex);


inqb_bill_set($res, 24, $value , $itemindex);

Default Value

Remarks

Line item property: Reference to the class of the item.

A reference to the class of this item.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemClassName Property (InQB_Bill Class)

Line item property: Reference to the class of the item.

Object Oriented Interface


public function getItemClassName($itemindex);


public function setItemClassName($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 25 , $itemindex);


inqb_bill_set($res, 25, $value , $itemindex);

Default Value

Remarks

Line item property: Reference to the class of the item.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemCost Property (InQB_Bill Class)

Line item property: Unit cost for item.

Object Oriented Interface


public function getItemCost($itemindex);


public function setItemCost($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 26 , $itemindex);


inqb_bill_set($res, 26, $value , $itemindex);

Default Value

Remarks

Line item property: Unit cost for item.

The unit cost for this item.

If ItemAmount is specified, then ItemCost will be calculated automatically and should not be specified.

The amount should be formatted as a string in dollars.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemCustomerId Property (InQB_Bill Class)

Line item property: A reference to customer for whom the item was ordered.

Object Oriented Interface


public function getItemCustomerId($itemindex);


public function setItemCustomerId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 27 , $itemindex);


inqb_bill_set($res, 27, $value , $itemindex);

Default Value

Remarks

Line item property: A reference to customer for whom the item was ordered.

A reference to a Customer for whom this item was ordered.

If this property is set, the expense will be set as billable to the Customer referenced.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemCustomerName Property (InQB_Bill Class)

Line item property: A reference to customer for whom the item was ordered.

Object Oriented Interface


public function getItemCustomerName($itemindex);


public function setItemCustomerName($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 28 , $itemindex);


inqb_bill_set($res, 28, $value , $itemindex);

Default Value

Remarks

Line item property: A reference to customer for whom the item was ordered.

A reference to a Customer for whom this item was ordered.

If this property is set, the expense will be set as billable to the Customer referenced.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemDescription Property (InQB_Bill Class)

Line item property: Description of item.

Object Oriented Interface


public function getItemDescription($itemindex);


public function setItemDescription($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 29 , $itemindex);


inqb_bill_set($res, 29, $value , $itemindex);

Default Value

Remarks

Line item property: Description of item.

A string description of the Item specified by ItemName or ItemId.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemGroupId Property (InQB_Bill Class)

Reference to a group of line items.

Object Oriented Interface


public function getItemGroupId($itemindex);


public function setItemGroupId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 30 , $itemindex);


inqb_bill_set($res, 30, $value , $itemindex);

Default Value

Remarks

Reference to a group of line items.

Line item groups represent sets of items that are grouped together. A line item group is a predefined shortcut within QuickBooks. For example, a "Cheeseburger Meal" might consist of a cheeseburger, an order of french fries, and a soft drink. To include an item group in a transaction one should simply set the value of ItemGroup, and optionally, of ItemQuantity. QuickBooks will automatically expand the group into its constituent items. This will send an ItemGroup instead of a regular Item on for this index.

When an ItemGroup is returned from QuickBooks it contains xml aggregates of all of the items in the group you specified. You may access the group's regular properties (total ItemAmount, ItemQuantity, and ItemDescription), but the line items returned are not accessible with this object. However, you may parse the returned line items by passing the contents of the ItemAggregate property to the LineItemGroups class. You may use the LineItemGroups class to view or change the contents of the line items, and then pass the xml aggregate generated by the class back to the ItemAggregate field to use in an Update transaction.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemGroupName Property (InQB_Bill Class)

Reference to a group of line items.

Object Oriented Interface


public function getItemGroupName($itemindex);


public function setItemGroupName($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 31 , $itemindex);


inqb_bill_set($res, 31, $value , $itemindex);

Default Value

Remarks

Reference to a group of line items.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemId Property (InQB_Bill Class)

Line item property: Reference to the kind of item.

Object Oriented Interface


public function getItemId($itemindex);


public function setItemId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 32 , $itemindex);


inqb_bill_set($res, 32, $value , $itemindex);

Default Value

Remarks

Line item property: Reference to the kind of item.

Line items represent goods or services bought in a QuickBooks transaction.

Each line item is represented by a number of properties, each prefixed by Item (see the list of properties for individual classs for details). Properties such as ItemQuantity and ItemDescription are always present; some properties are found in only certain types of transactions.

Item is a reference to a kind of item, predefined within QuickBooks. Generally items defined within QuickBooks have default values for ItemDescription, etc., and if only Item is set when adding a record to QuickBooks, the other properties will be set automatically.

This class is used to create a single item. However, any InQB class may be set with an unlimited number of these items. For example:

Invoice.ItemCount = 3 LineItems.ItemName = "Wingnut" LineItems.Quantity = 8 Invoice.ItemAggregate[0] = LineItems.GetAggregate() LineItems.ItemName = "Shovel" LineItems.Quantity = 1 Invoice.ItemAggregate[1] = LineItems.GetAggregate() LineItems.ItemName = "Mower blade" LineItems.Quantity = 1 Invoice.ItemAggregate[2] = LineItems.GetAggregate()

Items may also be grouped into ItemGroups, using the LineItemGroups class.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemName Property (InQB_Bill Class)

Line item property: Reference to the kind of item.

Object Oriented Interface


public function getItemName($itemindex);


public function setItemName($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 33 , $itemindex);


inqb_bill_set($res, 33, $value , $itemindex);

Default Value

Remarks

Line item property: Reference to the kind of item.

Line items represent goods or services bought in a QuickBooks transaction.

This class is used to create a single item. However, any InQB class may be set with an unlimited number of these items. For example:

Items may also be grouped into ItemGroups, using the LineItemGroups class.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemLineId Property (InQB_Bill Class)

Identification number of the transaction line, used for Updates.

Object Oriented Interface


public function getItemLineId($itemindex);


public function setItemLineId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 34 , $itemindex);


inqb_bill_set($res, 34, $value , $itemindex);

Default Value

Remarks

Identification number of the transaction line, used for Updates.

If you need to add a new transaction line in a transaction Update request, you can do so by setting the ItemLineId to -1.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemOverrideAccountId Property (InQB_Bill Class)

An account which will override the default account for the line item.

Object Oriented Interface


public function getItemOverrideAccountId($itemindex);


public function setItemOverrideAccountId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 35 , $itemindex);


inqb_bill_set($res, 35, $value , $itemindex);

Default Value

Remarks

An account which will override the default account for the line item. QBXMLVersion must be 2.0 or higher to use this configuration setting.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemOverrideAccountName Property (InQB_Bill Class)

An account which will override the default account for the line item.

Object Oriented Interface


public function getItemOverrideAccountName($itemindex);


public function setItemOverrideAccountName($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 36 , $itemindex);


inqb_bill_set($res, 36, $value , $itemindex);

Default Value

Remarks

An account which will override the default account for the line item. QBXMLVersion must be 2.0 or higher to use this configuration setting.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemQuantity Property (InQB_Bill Class)

Line item property: Quantity of item or item group.

Object Oriented Interface


public function getItemQuantity($itemindex);


public function setItemQuantity($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 37 , $itemindex);


inqb_bill_set($res, 37, $value , $itemindex);

Default Value

Remarks

Line item property: Quantity of item or item group.

The quantity of the Item specified in this line.

If ItemQuantity and only one of ItemCost, ItemRate, or ItemAmount are specified, QuickBooks will automatically calculate the other.

This property is a String type in order to allow setting fractional quantities. Setting this property with non-numeric data will cause an error. Correct usage of this property is shown below:

class.Quantity = "3.5"

Leave this property blank and no quantity will be sent to QuickBooks.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemTaxCodeId Property (InQB_Bill Class)

Line item property: Sales tax information for this item.

Object Oriented Interface


public function getItemTaxCodeId($itemindex);


public function setItemTaxCodeId($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 38 , $itemindex);


inqb_bill_set($res, 38, $value , $itemindex);

Default Value

Remarks

Line item property: Sales tax information for this item.

This is a reference to a sales tax code predefined within QuickBooks.

By default, two standard TaxCodes exist: "TAX", or Taxable Sales, and "NON", or Non-Taxable Sales. The QuickBooks user may also define custom tax codes.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemTaxCodeName Property (InQB_Bill Class)

Line item property: Sales tax information for this item.

Object Oriented Interface


public function getItemTaxCodeName($itemindex);


public function setItemTaxCodeName($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 39 , $itemindex);


inqb_bill_set($res, 39, $value , $itemindex);

Default Value

Remarks

Line item property: Sales tax information for this item.

This is a reference to a sales tax code predefined within QuickBooks.

By default, two standard TaxCodes exist: "TAX", or Taxable Sales, and "NON", or Non-Taxable Sales. The QuickBooks user may also define custom tax codes.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

ItemUnitOfMeasure Property (InQB_Bill Class)

Unit of measure describing the Quantity .

Object Oriented Interface


public function getItemUnitOfMeasure($itemindex);


public function setItemUnitOfMeasure($itemindex, $value);

Procedural Interface


inqb_bill_get($res, 40 , $itemindex);


inqb_bill_set($res, 40, $value , $itemindex);

Default Value

Remarks

Unit of measure describing the ItemQuantity.

In a transaction line item, the name of the unit of measure selected from within the item's available units. If the company file is enabled only for single unit of measure per item, this must be the base unit!

This property is only available for QBXMLVersion 7.0 and higher.

The $itemindex parameter specifies the index of the item in the array. The size of the array is controlled by the ItemCount property.

This property is not available at design time.

Data Type

String

LinkedTxnCount Property (InQB_Bill Class)

The number of records in the LinkedTxn arrays.

Object Oriented Interface


public function getLinkedTxnCount();

Procedural Interface


inqb_bill_get($res, 41 );

Default Value

Remarks

This property controls the size of the following arrays:

LinkedTxnAmount
LinkedTxnDate
LinkedTxnId
LinkedTxnLinkType
LinkedTxnRefNumber
LinkedTxnType

The array indices start at 0 and end at LinkedTxnCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

LinkedTxnAmount Property (InQB_Bill Class)

The amount of the linked transaction.

Object Oriented Interface


public function getLinkedTxnAmount($linkedtxnindex);

Procedural Interface


inqb_bill_get($res, 42 , $linkedtxnindex);

Default Value

Remarks

The amount of the linked transaction.

The $linkedtxnindex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkedTxnCount property.

This property is read-only and not available at design time.

Data Type

String

LinkedTxnDate Property (InQB_Bill Class)

The date of the linked transaction.

Object Oriented Interface


public function getLinkedTxnDate($linkedtxnindex);

Procedural Interface


inqb_bill_get($res, 43 , $linkedtxnindex);

Default Value

Remarks

The date of the linked transaction.

The $linkedtxnindex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkedTxnCount property.

This property is read-only and not available at design time.

Data Type

String

LinkedTxnLinkType Property (InQB_Bill Class)

Indicates the nature of the link between the transactions.

Object Oriented Interface


public function getLinkedTxnLinkType($linkedtxnindex);

Procedural Interface


inqb_bill_get($res, 44 , $linkedtxnindex);

Default Value

Remarks

Indicates the nature of the link between the transactions. Possible responses include:


AMTTYPE	The two transactions are linked based on an amount value (for example an invoice linked to a payment).
QUANTYPE	The two transactions are linked based on a quantity. This affects transactions that are linked to sales orders, estimates and purchase orders. For example, an invoice might be created from a sales order, based on the quantity of items received.

The $linkedtxnindex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkedTxnCount property.

This property is read-only and not available at design time.

Data Type

String

LinkedTxnRefNumber Property (InQB_Bill Class)

This is the reference number assigned to the linked transaction.

Object Oriented Interface


public function getLinkedTxnRefNumber($linkedtxnindex);

Procedural Interface


inqb_bill_get($res, 45 , $linkedtxnindex);

Default Value

Remarks

This is the reference number assigned to the linked transaction. Depending on the type of transaction, it appears in the QuickBooks user interface as Bill Number, Invoice Number, etc.

Reference numbers are alphanumeric strings and are not limited to actually being numbers.

The $linkedtxnindex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkedTxnCount property.

This property is read-only and not available at design time.

Data Type

String

LinkedTxnId Property (InQB_Bill Class)

This property can be used by another class to reference the original transaction which is linked to the current response.

Object Oriented Interface


public function getLinkedTxnId($linkedtxnindex);

Procedural Interface


inqb_bill_get($res, 46 , $linkedtxnindex);

Default Value

Remarks

This property can be used by another class to reference the original transaction which is linked to the current response. Simply set the Id property of the appropriate class (based on the LinkedTxnTxnType property) and call the Get method.

The $linkedtxnindex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkedTxnCount property.

This property is read-only and not available at design time.

Data Type

String

LinkedTxnType Property (InQB_Bill Class)

This property indicates which type of linked transaction has been returned.

Object Oriented Interface


public function getLinkedTxnType($linkedtxnindex);

Procedural Interface


inqb_bill_get($res, 47 , $linkedtxnindex);

Default Value

Remarks

This property indicates which type of linked transaction has been returned. The LinkedTxnTxnType returned will tell you which class to use to retrieve the original transaction. Use the LinkedTxnTxnId as the Id parameter in the indicated class's Get method to return the original transaction details.

Valid values include:


Bill	(Bill class)
BillPaymentCheck	(n/a)
BillPaymentCreditCard	(n/a)
BuildAssembly	(n/a)
Charge	(StatementCharge class)
Check	(Check class)
CreditCardCharge	(CCCredit class)
CreditCardCredit	(CCCharge class)
CreditMemo	(CreditMemo class)
Deposit	(Deposit class)
Estimate	(Estimate class)
InventoryAdjustment	(AdjustInventory class)
Invoice	(Invoice class)
ItemReceipt	(ItemReceipt class)
JournalEntry	(JournalEntry class)
LiabilityAdjustment	(n/a)
Paycheck	(n/a)
PayrollLiabilityCheck	(n/a)
PurchaseOrder	(PurchaseOrder class)
ReceivePayment	(ReceivePayment class)
SalesOrder	(SalesOrder class)
SalesReceipt	(SalesReceipt class)
SalesTaxPaymentCheck	(n/a)
Transfer	(n/a)
VendorCredit	(VendorCredit class)
YTDAdjustment	(n/a)

Note: Not all of the above values are available in the QuickBooks API. Some are only available within the QuickBooks application itself. If the value above is available in the API, the corresponding class is indicated in parenthesis.

The $linkedtxnindex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkedTxnCount property.

This property is read-only and not available at design time.

Data Type

String

LinkToTxnId Property (InQB_Bill Class)

The LinkToTxnId property allows you to link to an entire transaction, pulling in all of its line items.

Object Oriented Interface


public function getLinkToTxnId();


public function setLinkToTxnId($value);

Procedural Interface


inqb_bill_get($res, 48 );


inqb_bill_set($res, 48, $value );

Default Value

Remarks

When used in the Invoice class, the transaction you are linking to via this field must be a Sales Order. Links to other transactions, such as to estimates, are not currently supported. The use of this property requires QBXMLVersion on the Invoice to be "6.0" or greater.

When used with the Bill or ItemReceipt classs, the transaction you are linking to via this field must be a Purchase Order. Links to other transactions are not currently supported. The use of this property requires QBXMLVersion on the Bill or ItemReceipt to be "4.0" or greater.

You will get a runtime error if the transaction specified by LinkToTxnId is already closed or fully received and the request does not contain any other lines. You will also get an error if you attempt to save an empty transaction.

Data Type

String

Memo Property (InQB_Bill Class)

Memo to appear on internal reports only.

Object Oriented Interface


public function getMemo();


public function setMemo($value);

Procedural Interface


inqb_bill_get($res, 49 );


inqb_bill_set($res, 49, $value );

Default Value

Remarks

A memo to appear on internal reports. Will not appear to customers, vendors, etc.

Data Type

String

QBConnectionString Property (InQB_Bill Class)

An aggregate consisting of various QuickBooks connection properties.

Object Oriented Interface


public function getQBConnectionString();


public function setQBConnectionString($value);

Procedural Interface


inqb_bill_get($res, 50 );


inqb_bill_set($res, 50, $value );

Default Value

Remarks

QBConnectionString allows the user to customize the application's interaction with QuickBooks.

The connection properties should be formatted in a sequence as follows:

propertyname = "propertyvalue" propertyname = "propertyvalue" ...

The order is irrelevant, and the whitespace around the equal sign is optional.

The following properties are currently supported:


ApplicationName	The name of the developer's application. This name will appear when the application first connects to QuickBooks; QuickBooks will display this name and prompt the user to grant or refuse access.
CompanyFile	The name of the company file to open. If QuickBooks is not currently open with a company file, QuickBooks will be automatically opened in the background with the file specified. Do not set CompanyFile when QuickBooks is open; if QuickBooks is open through the application UI, only that company file may be used. This setting is not applicable when communicating with QB Connector.
URL	The URL for the Remote Connector, e.g., 'http://localhost:2080'. If the URL is specified, the class will not communicate directly with QuickBooks, and will instead send a request to the specified web address. QuickBooks and the Remote Connector should be installed at the remote location, and if the connector is listening on the specified port, it will communicate the class's request to QuickBooks, and return the response.
User	A username for the Remote Connector connection (if required on the Connector side)
Password	A password for the Remote Connector connection (if required on the Connector side)
Timeout	A timeout, in seconds, for the Remote Connector connection. If the Connector does not finish and respond within the chosen length of time, the class will generate an exception instead of hanging.
DelayAfterClose	A delay, in milliseconds, to be applied after each time a connection to QuickBooks is closed. If QuickBooks is generating internal errors (in particular with automatic login) setting this delay to a positive value may solve the problem.
FirewallHost	Contains the name or IP address of firewall. If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.
FirewallPassword	Contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword configs are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.
FirewallPort	Contains the TCP port for the firewall FirewallHost. Note this is set automatically when FirewallType is set to a valid value.
FirewallType	Determines the type of firewall to connect through. Supported values are: 0 - no firewall (default), 1 - Tunneling proxy, 2 - SOCKS4 proxy, and 3 - SOCKS5 proxy. For the Tunneling proxy (1), the FirewallPort defaults to 80. For SOCKS4 (2) and SOCKS5 (3) the FirewallPort defaults to 1080.
FirewallUser	Contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, the FirewallUser and FirewallPassword configs are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.
ProxyAuthorization	Supported values are 0 - Basic authorization, 1 - Digest authentication, 3 - No authentication, and 4 - NTLM authentication.
ProxyPassword	Contains a password if authentication is to be used for the proxy.
ProxyPort	Contains the TCP port for a ProxyServer; (default 80).
ProxySSL	Determines when to use SSL for the connection to the proxy. The applicable values are 0 - Automatic (SSL for https URLs, non-SSL for http URLs), 1 - The connection is always SSL-enabled, 2 - SSL is not enabled for any connection, and 3 - Connection is through a tunneling proxy.
ProxyServer	If a ProxyServer is specified, then the HTTP request is sent to the proxy instead of the server otherwise specified. If the ProxyServer is set to a Domain Name, a DNS request is initiated and upon successful termination of the request, the ProxyServer is set to the corresponding address. If the search is not successful, an error is returned.
ProxyUser	Contains a user name, if authentication is to be used for the proxy.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	The TCP port in the local host where the class binds.
UseRDS	Whether to connect using Remote Data Sharing (RDS). If set to True, the class will attempt to connect using the RDS client installed on the machine. The RDS client and server must be configured separately. The default value is False.

Data Type

String

QBRequestAggregate Property (InQB_Bill Class)

The request aggregate.

Object Oriented Interface


public function getQBRequestAggregate();


public function setQBRequestAggregate($value);

Procedural Interface


inqb_bill_get($res, 51 );


inqb_bill_set($res, 51, $value );

Default Value

Remarks

This property will be populated when QBRequestMode is set to rmOffline and a method is called. This is used when working with the QBWCServer class to generate requests to be sent to QuickBooks Web Connector.

This property is not available at design time.

Data Type

String

QBRequestId Property (InQB_Bill Class)

The Id of the next message to be sent to QuickBooks.

Object Oriented Interface


public function getQBRequestId();


public function setQBRequestId($value);

Procedural Interface


inqb_bill_get($res, 52 );


inqb_bill_set($res, 52, $value );

Default Value

Remarks

The next message Id to be sent to QuickBooks. Message Id's are used by CheckRequestStatus to check on the status of previously made requests.

This property allows the user to determine whether a previous request was successfully processed by QuickBooks. Ordinarily QuickBooks either processes requests successfully or returns an error, but in the event of a power outage or other system failure, QuickBooks might or might not have time to process a request before issuing a response.

QuickBooks stores internally a list of QBRequestIds for which it has processed a request, and updated its internal state accordingly. Use of this property in conjunction with CheckRequestStatus allows the user to query this internal list.

To enable error recovery, the user application should store the value of QBRequestId before submitting a request to QuickBooks. If a system failure occurs, CheckRequestStatus should be called with this value of QBRequestId to find whether the request was processed before the system failed.

Unique values for QBRequestId will be generated on startup and after each request to QuickBooks. The automatically generated value may be overwritten by the user. Error checking may be turned off by setting QBRequestId equal to the empty string. See CheckRequestStatus for more information on error recovery.

This property is not available at design time.

Data Type

String

QBRequestMode Property (InQB_Bill Class)

Defines whether the request is made online or stored offline.

Object Oriented Interface


public function getQBRequestMode();


public function setQBRequestMode($value);

Procedural Interface


inqb_bill_get($res, 53 );


inqb_bill_set($res, 53, $value );

Default Value

Remarks

This property defines the behavior of the class when calling a method. Possible values are:


0 (rmOnline - default)	The request is made normally.
1 (rmOffline)	The request is generated but not sent, and QBRequestAggregate is populated.

The use of offline mode is required when using the QBWCServer class. This allows requests to be generated and passed to QuickBooks Web Connector through the QBWCServer class.

For normal communication to QuickBooks either directly or through the QBConnector application use the default online mode.

Data Type

Integer

QBResponseAggregate Property (InQB_Bill Class)

The last QBXML response aggregate received from QuickBooks.

Object Oriented Interface


public function getQBResponseAggregate();


public function setQBResponseAggregate($value);

Procedural Interface


inqb_bill_get($res, 54 );


inqb_bill_set($res, 54, $value );

Default Value

Remarks

The last QBXML response aggregate received from QuickBooks. This property is set whenever a response is received from QuickBooks.

This property may also be set to a response aggregate. When set to a QBXML aggregate, such as a response from ObjSearch or QBWCServer the class will parse the response as if it had been received directly from QuickBooks and the applicable properties will be updated.

This property is not available at design time.

Data Type

String

QBXMLVersion Property (InQB_Bill Class)

The version of QBXML used in the outgoing message.

Object Oriented Interface


public function getQBXMLVersion();


public function setQBXMLVersion($value);

Procedural Interface


inqb_bill_get($res, 55 );


inqb_bill_set($res, 55, $value );

Default Value

'3.0'

Remarks

The version of QBXML used in the outgoing message. Except as noted in the documentation, a value of "1.1" will suffice for all requests, and for all versions of QuickBooks which support integrated applications.

With each release of QuickBooks since 2002, a corresponding version of the QuickBooks SDK has also been released: 1.0 for QuickBooks 2002, 2.0 for QuickBooks 2003, 3.0 for QuickBooks 2004, etc., up to 8.0 for QuickBooks 2009. In addition, each release of QuickBooks continues to support all earlier versions of the SDK, meaning that requests using version 1.1 of the QuickBooks SDK are supported by all versions of QuickBooks. However, new requests and newer fields in existing requests are only supported in later versions of the QuickBooks SDK. As such, it is recommended that you set the QBXMLVersion property to correspond to the version of QuickBooks you are interacting with. These values are:


QuickBooks 2002	1.0, 1.1
QuickBooks 2003	2.0
QuickBooks 2004	3.0
QuickBooks 2005	4.0, 4.1
QuickBooks 2006	5.0
QuickBooks 2007	6.0
QuickBooks 2008	7.0
QuickBooks 2009	8.0
QuickBooks 2010	9.0
QuickBooks 2011	10.0
QuickBooks 2012	11.0
QuickBooks 2013	12.0
QuickBooks 2014	13.0
QuickBooks 2015	14.0
QuickBooks 2016	15.0

In addition, versions of QuickBooks outside of the U.S. released before Quickbooks 2008 adhere to a different version of the QuickBooks SDK. These versions were updated with less frequency than the U.S. SDK, and may omit features introduced in later releases:


QuickBooks Canadian 2003	CA2.0
QuickBooks Canadian 2004 to 2007	CA3.0
QuickBooks UK 2003	UK2.0
QuickBooks UK 2004 to 2007	UK3.0
QuickBooks Australian 2003	OZ2.0
QuickBooks Australian 2004 to 2007	AU3.0

With the exception of Province in Address (set State) or EligibleForT4A in Vendor (set EligibleFor1099), Canadian-only fields are read-only and may be accessed with Config.

This property is not available at design time.

Data Type

String

RefId Property (InQB_Bill Class)

An alphanumerical identifier generated by the server.

Object Oriented Interface


public function getRefId();

Procedural Interface


inqb_bill_get($res, 56 );

Default Value

Remarks

An Id is an alphanumerical identifier assigned by the server whenever an object is added to QuickBooks. It is guaranteed to be unique across all objects of the same type.

This property is read-only and not available at design time.

Data Type

String

RefNumber Property (InQB_Bill Class)

Reference number for the transaction.

Object Oriented Interface


public function getRefNumber();


public function setRefNumber($value);

Procedural Interface


inqb_bill_get($res, 57 );


inqb_bill_set($res, 57, $value );

Default Value

Remarks

This is the reference number assigned to a transaction. Depending on the type of transaction, it appears in the QuickBooks user interface as Bill Number, Invoice Number, etc.

Reference numbers are alphanumeric strings and are not limited to actually being numbers.

For some types of transactions, if RefNumber is not assigned, QuickBooks will automatically assign a unique one. Reference numbers should generally be unique, but are not guaranteed to be so. It is recommended that applications generating their own reference numbers take steps to ensure their uniqueness.

Data Type

String

TermsId Property (InQB_Bill Class)

Reference to terms of payment.

Object Oriented Interface


public function getTermsId();


public function setTermsId($value);

Procedural Interface


inqb_bill_get($res, 58 );


inqb_bill_set($res, 58, $value );

Default Value

Remarks

A reference to terms of payment, predefined within QuickBooks. A typical example might be "2% 10 Net 60", i.e., payment due within 60 days, with a 2% discount if payment is made within 10 days.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Data Type

String

TermsName Property (InQB_Bill Class)

Reference to terms of payment.

Object Oriented Interface


public function getTermsName();


public function setTermsName($value);

Procedural Interface


inqb_bill_get($res, 59 );


inqb_bill_set($res, 59, $value );

Default Value

Remarks

A reference to terms of payment, predefined within QuickBooks. A typical example might be "2% 10 Net 60", i.e., payment due within 60 days, with a 2% discount if payment is made within 10 days.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

Data Type

String

TransactionDate Property (InQB_Bill Class)

Date of transaction.

Object Oriented Interface


public function getTransactionDate();


public function setTransactionDate($value);

Procedural Interface


inqb_bill_get($res, 60 );


inqb_bill_set($res, 60, $value );

Default Value

Remarks

The date of the transaction.

The standard formatting for dates is YYYY-MM-DD; i.e., September 2, 2002 is formatted as 2002-09-02. When getting the value of a date property, the date will always be in this format.

This property is required in Accounts Payable (Bill and VendorCredit) transactions. In other kinds of transactions this property is optional.

Data Type

String

VendorId Property (InQB_Bill Class)

Reference to the vendor for this transaction.

Object Oriented Interface


public function getVendorId();


public function setVendorId($value);

Procedural Interface


inqb_bill_get($res, 61 );


inqb_bill_set($res, 61, $value );

Default Value

Remarks

The Vendor property refers to the Vendor from whom the goods or services were purchased.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Either VendorId or VendorName is required.

Data Type

String

VendorName Property (InQB_Bill Class)

Reference to the vendor for this transaction.

Object Oriented Interface


public function getVendorName();


public function setVendorName($value);

Procedural Interface


inqb_bill_get($res, 62 );


inqb_bill_set($res, 62, $value );

Default Value

Remarks

The Vendor property refers to the Vendor from whom the goods or services were purchased.

Name/Id Reference Properties

Setting the value of this property will set the corresponding Id property to an empty string.

Either VendorId or VendorName is required.

Data Type

String

Add Method (InQB_Bill Class)

Adds the record into QuickBooks.

Object Oriented Interface

public function doAdd();

Procedural Interface

inqb_bill_do_add($res);

Remarks

Add is used to add the object to QuickBooks.

If QuickBooks is able to add the object, it will return a copy of the object, and the values of all properties will be reset from the QuickBooks response. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

For example, read-only properties such as RefIds will be assigned. In transaction objects, line item information will be filled out, and ItemGroups will be broken up into their respective Items. Also, a total will be calculated.

If QuickBooks is not able to add the object, a trappable error will occur.

Cancel Method (InQB_Bill Class)

Cancels (voids) the transaction.

Object Oriented Interface

public function doCancel();

Procedural Interface

inqb_bill_do_cancel($res);

Remarks

Cancel causes the transaction to be voided in QuickBooks. The amount of the transaction and all line item quantities are changed to zero, and the memo is changed to "VOID:". The transaction will not, however, be deleted.

The transaction canceled in QuickBooks is the one specified by RefId. If the value of RefId is known then Get should first be called to retrieve the transaction. Otherwise the ObjSearch class should be used to search for the desired transaction in the QuickBooks database.

As the QuickBooks response to Cancel does not include the updated transaction, the values of all properties are instead set to their defaults. To get a copy of the updated transaction, the value of RefId should first be stored, and then Get should be called.

CheckRequestStatus Method (InQB_Bill Class)

Checks whether or not the specified request was processed by QuickBooks.

Object Oriented Interface

public function doCheckRequestStatus($requestid);

Procedural Interface

inqb_bill_do_checkrequeststatus($res, $requestid);

Remarks

This method allows the user to determine whether a previous request was successfully processed by QuickBooks. Ordinarily QuickBooks either processes requests successfully or returns an error, but in the event of a power outage or other system failure, QuickBooks might or might not have time to process a request before issuing a response.

QuickBooks stores internally a list of QBRequestIds for which it has processed a request, and updated its internal state accordingly. Use of this method allows the user to query the list for any RequestId whose value is known.

The method returns a string corresponding to the result of the query. If the request was processed successfully, an empty string ("") will be returned. If the request was not processed, the string "Request not processed." will be returned. If the request was processed but an error occurred, a string containing the error code and a description will be returned; for example, "801: A QuickBooks internal error has occurred."

See QBRequestId for more information on error recovery.

CloseQBConnection Method (InQB_Bill Class)

Closes a persistent connection to QuickBooks.

Object Oriented Interface

public function doCloseQBConnection();

Procedural Interface

inqb_bill_do_closeqbconnection($res);

Remarks

Invoking CloseQBConnection closes the QuickBooks connection specified in QBConnectionString. After the connection has been closed, the class will revert to its default behavior, and a new connection will be established for each request until QBConnectionString is invoked again.

In case the connection is already closed invoking CloseQBConnection will have no effect. Moreover, if multiple connections are open CloseQBConnection will only close the connection specified in QBConnectionString.

Be sure to always invoke this method after calling OpenQBConnection.

Config Method (InQB_Bill Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

inqb_bill_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Delete Method (InQB_Bill Class)

Deletes the record from QuickBooks.

Object Oriented Interface

public function doDelete();

Procedural Interface

inqb_bill_do_delete($res);

Remarks

Delete causes the object to be deleted in QuickBooks. After this method is called, the values of all fields will be reset to their defaults.

The object deleted in QuickBooks is the one specified by RefId. This read-only property may be assigned either by calling Get or by assigning the value of QBResponseAggregate.

A typical example: Customer.GetByName("John Smith") 'this will assign the RefId Customer.Delete() Deleting entity objects (Customer, Employee, and Vendor) requires that QuickBooks be open in single-user mode. Transaction objects, however, may be deleted while QuickBooks is in any mode.

Use this method with caution, as there is no way to recover deleted objects.

Get Method (InQB_Bill Class)

Gets a single record from QuickBooks.

Object Oriented Interface

public function doGet($id);

Procedural Interface

inqb_bill_do_get($res, $id);

Remarks

Get may be used to retrieve a single object from QuickBooks, based on its RefId. When the method is called, a search will be initiated for the requested object. If it is found, all properties of the class will be set to the information retrieved from QuickBooks. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

The RefId of any class, or the Id of any reference property, may be used for the parameter. So for example, the following pseudocode would get customer information for a Customer listed on an Invoice:

Customer.Get( Invoice.CustomerId )

The GetByName method, present only in entity objects (Customer, Vendor, and Employee) and QBObject, may be used to get an object based on its Name. To retrieve multiple objects, to retrieve transaction objects whose RefId is not known, or to perform more advanced searches the ObjSearch class may be used.

GetCustomField Method (InQB_Bill Class)

Gets a custom field value from QuickBooks.

Object Oriented Interface

public function doGetCustomField($fieldname);

Procedural Interface

inqb_bill_do_getcustomfield($res, $fieldname);

Remarks

This method will get the value of a custom field, which has been defined by the user from within the QuickBooks UI.

To read the values of custom fields, be sure to set QBXMLVersion to at least "2.0" when retrieving data from QuickBooks. Then, QuickBooks will return custom field information, and it will be accessible through this method.

You may also invoke Config to read the value of custom fields. However, to set the value of custom fields you must set QBXMLVersion to at least "3.0" and invoke SetCustomField.

ImportQBXML Method (InQB_Bill Class)

Imports a QBXML response aggregate.

Object Oriented Interface

public function doImportQBXML($xmldata);

Procedural Interface

inqb_bill_do_importqbxml($res, $xmldata);

Remarks

This method imports a QBXML response aggregate. When called with a QBXML aggregate, such as a response from ObjSearch or QBWCServer the class will parse the response as if it had been received directly from QuickBooks and the applicable properties will be updated.

OpenQBConnection Method (InQB_Bill Class)

Opens a persistent connection to QuickBooks.

Object Oriented Interface

public function doOpenQBConnection();

Procedural Interface

inqb_bill_do_openqbconnection($res);

Remarks

Invoking OpenQBConnection will open a persistent connection to QuickBooks. After invoking OpenQBConnection, all requests such as Get, Add, etc. will use the established connection until CloseQBConnection is invoked.

The effect of OpenQBConnection is to increase performance. If OpenQBConnection is not invoked, a connection to QuickBooks will automatically be created and destroyed each time the class communicates with QuickBooks. Using OpenQBConnection will be faster, particularly in the case of automatic login.

After OpenQBConnection is invoked, QuickBooks will issue a connection ticket, and it will be stored in QBConnectionString. When CloseQBConnection is invoked the ticket will be invalidated, and any further attempts to use it will fail.

Be sure to invoke CloseQBConnection when you have finished communicating with QuickBooks. Leaving an open QuickBooks connection may lock out other integrated applications, affect QuickBooks performance, or cause other problems.

Reset Method (InQB_Bill Class)

Resets all properties to their defaults.

Object Oriented Interface

public function doReset();

Procedural Interface

inqb_bill_do_reset($res);

Remarks

This method resets the values of all properties (and all special fields) to their defaults.

After calling this method, the class may be reused as if it were newly created.

SetCustomField Method (InQB_Bill Class)

Sets a custom field value within QuickBooks.

Object Oriented Interface

public function doSetCustomField($fieldname, $fieldvalue);

Procedural Interface

inqb_bill_do_setcustomfield($res, $fieldname, $fieldvalue);

Remarks

This method requires QuickBooks 2004 or above, with QBXMLVersion set to at least "3.0".

This method will immediately set the value of a QuickBooks custom field, which has been defined by the user from within the QuickBooks UI. Before calling this method, the preceding operation must retrieve the object from QuickBooks, using Get, ObjSearch, etc. Then, you may use SetCustomField to set custom field values (the fields will be modified or added, as appropriate).

Note that invoking this method will create a connection to QuickBooks if one is not already in place.

Update Method (InQB_Bill Class)

Updates the bill in QuickBooks.

Object Oriented Interface

public function doUpdate();

Procedural Interface

inqb_bill_do_update($res);

Remarks

This method will update the bill in QuickBooks.

When the method is called, an Update request will be submitted to QuickBooks. The bill will have its information updated based on the various property values.

If QuickBooks is able to update the object, it will return a copy of the object, and the values of all properties will be reset from the QuickBooks response. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

QBXMLVersion must be set to "3.0" or greater to update a bill. Moreover, QBXMLVersion should be set to the same value when retrieving the bill from QuickBooks (either through ObjSearch or through the Get method).

Error Event (InQB_Bill Class)

Information about errors during data delivery.

Object Oriented Interface

public function fireError($param);

Procedural Interface

inqb_bill_register_callback($res, 1, array($this, 'fireError'));

Parameter List

 'errorcode'
 'description'

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (InQB_Bill Class)

Fired after the server presents its certificate to the client.

Object Oriented Interface

public function fireSSLServerAuthentication($param);

Procedural Interface

inqb_bill_register_callback($res, 2, array($this, 'fireSSLServerAuthentication'));

Parameter List

 'certencoded'
 'certsubject'
 'certissuer'
 'status'
 'accept'

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (InQB_Bill Class)

Shows the progress of the secure connection.

Object Oriented Interface

public function fireSSLStatus($param);

Procedural Interface

inqb_bill_register_callback($res, 3, array($this, 'fireSSLStatus'));

Parameter List

 'message'

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Status Event (InQB_Bill Class)

Shows the progress of the QuickBooks connection.

Object Oriented Interface

public function fireStatus($param);

Procedural Interface

inqb_bill_register_callback($res, 4, array($this, 'fireStatus'));

Parameter List

 'message'

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Warning Event (InQB_Bill Class)

Fired when a warning occurs.

Object Oriented Interface

public function fireWarning($param);

Procedural Interface

inqb_bill_register_callback($res, 5, array($this, 'fireWarning'));

Parameter List

 'code'
 'description'

Remarks

The Warning event is fired when the class has produced, or will produce, possibly unexpected results.

Warnings may be generated by QuickBooks or the class. Starred warning codes correspond to warnings and warning codes generated by QuickBooks.


510*	Object added successfully, but cannot now be read.
520*	Insufficient permissions to get all data.
801	Unable to update field (name).
802	Unable to parse name.

Unlisted QuickBooks warnings will cause the class to throw an exception instead.

Warning 801 will be thrown if the user attempts to Update properties that cannot be updated. For example, the following code will cause this warning to be fired: Customer1.GetByName("Joe Smith") Customer1.Email = "joe@abc.com" 'ok Customer1.CreditLimit = "200.00" 'Not used in Update operations! Customer1.Update() Only the email address will be updated, and the credit limit will be unchanged. Each property description for entity objects lists whether or not it is used in Update operations.

Config Settings (Bill Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

Bill Config Settings

AppendAfter: Appends an XML tag after the specified QBXML element.

Write-only; Appends the specified text after the specified QBXML element (whether the QBXML element is present). This may be useful to extend the functionality of the component beyond what is provided. Example: Control1.Config("AppendAfter:ListID=<WeirdNewField>abc</WeirdNewField>")

AuthFlags: Connection Flags (use for QuickBooks Simple Start).

Since 2006, QuickBooks has allowed AuthFlags to be set before connecting to QuickBooks. By default, the class can connect to Pro, Premier, and Enterprise editions of QuickBooks. However, because QuickBooks Simple Start contains only a subset of the functionality that other desktop versions provide, Intuit does not allow COM connection to Simple Start unless these AuthFlags explicitly indicate you wish to support it.

A list of allowable AuthFlags is provided below.


"" or 0	Do not send any auth flags
0x01	Support QB Simple Start
0x02	Support QB Pro
0x04	Support QB Premier
0x08	Support QB Enterprise
0x80000000	Force Auth Dialog

To specify support for multiple editions, OR together the values for each edition.

NOTE: If the version of QuickBooks being used does not support AuthFlags, the contents of this config will be ignored. However, if QuickBooks does support this feature, setting "AuthFlags=1" (Support for Simple Start only) on a machine running QuickBooks 2013 Pro will result in an error message indicating that the Request Processor cannot be found.

EditSequence: An identifier for this copy of the object.

Indicates the state of an object when doing an Update.

EnforceMaxLength: Indicates whether to enforce max lengths for QB Fields.

If you change this setting to False, the class will no longer check (or error) when the length of a property exceeds the maximum length specified in the QuickBooks SDK.

ExchangeRate: Indicates the exchange rate for the transaction.

Exchange Rate is a floating-point number stored with five digits after the decimal place. The exchange rate is multiplied by the foreign currency amount to get the home currency amount; that is,

ExchangeRate x (foreign currency amount) = (home currency amount).

(The foreign currency and home currency are set in the QuickBooks application)

ExpenseLineAggregate[index]: Contains the XML aggregate of the expense line item.

If the line item has not been modified since receiving a response from QuickBooks, the exact ExpenseLineRet aggregate that QuickBooks returned will be contained in this XML aggregate. However, if you have made changes to the ExpenseLine fields, the Aggregate field will re-generate the line item XML with the new data.

If you set the other line item fields and then query the Aggregate, a ExpenseLineRet aggregate will be generated from the currently set fields.

You may set this field with raw xml. So long as you do not modify any other fields (forcing the line item to regenerate based on new changes), the xml will be sent as-is to the QuickBooks request processor. It is essential that you properly format the XML that you place in this field. When setting this field manually, the component will send exactly what you have set. You must ensure your xml is appropriate for the action you are attempting. For instance, if you are Adding, you must ensure the outer tags are "ExpenseLineAdd". If modifying, the outer tags must be "ExpenseLineMod".

If you do not expressly set the Aggregate field with your own custom XML, all of this will be taken care of you automatically by the component.

GetHighestVersion: Highest QBXMLVersion supported by the installed instance of QuickBooks.

If QuickBooks is installed on the system, this setting will retrieve the highest QBXMLVersion that may be used for sending transactions to QuickBooks.

GetRequestProcessorDLLVersion: Returns the version of the QB Request Processor that is installed on your system.

GetSupportedVersions: Returns a list of QBXMLVersions that are supported by QuickBooks.

If QuickBooks is installed on the system, this setting will retrieve a list of all supported QBXMLVersions that may be used for sending transactions to QuickBooks. While GetHighestVersion config returns only the highest QBXMLVersion supported, this config returns ALL supported QBXMLVersions. The list is delimited with '\n' (linefeed) characters.

IsReadOnly: This causes the QuickBooks authorization dialog to display text informing the user that its access will be read-only.

The default value is false.

Items[index].OverrideItemAccountId: An account which will override the default account for the line item.

QBXMLVersion must be 2.0 or higher to use this configuration setting.

Items[index].OverrideItemAccountName: An account which will override the default account for the line item.

QBXMLVersion must be 2.0 or higher to use this configuration setting.

PersonalDataPref: Whether the connecting application will require access to personal data such as SSN or credit card information.

This setting allows you to let the user know immediately whether your application requires access to personal data or not.

A list of available values is provided below.


pdpOptional	Causes the QuickBooks authorization dialog to display a checkbox for user selection asking whether the user wants to allow the application to access personal data.
pdpRequired	Causes the QuickBooks authorization dialog to not display the personal information checkbox for user selection, and instead display a warning that the application needs to access personal data.
pdpNotNeeded	Causes the QuickBooks authorization dialog to not display the personal information checkbox for user selection, and instead display an informational message that the application will NOT access personal data.

The default value is pdpOptional.

QBConnectionMode: The mode of connection to QuickBooks.

Specifies whether the integrated application logs in using single-user or multi-user mode.

The following values are permitted:


0	Don't Care
1	Single-User Mode
2	Multi-User Mode

About Single-User and Multi-User Modes

If the connection to QuickBooks is made in single-user mode, QuickBooks will give exclusive access to the connecting application. It will lock out all other integrated applications; if QuickBooks and the company file are not already open in single-user mode by the QuickBooks user, the user will be locked out as well.

If the connection is made in multi-user mode, QuickBooks will allow all other integrated applications access. QuickBooks end users on other machines will also be allowed to access the file. However, if the application (rather than the end user) starts QuickBooks automatically, end users on the same machine will still be locked out.

If cmDontCare is specified, an appropriate connection mode will be chosen automatically. If a company file is open in either single-user or multi-user mode, the integrated application will accept that connection mode. If no company file is open, QuickBooks will login automatically in multi-user mode.

About Integrated and Automatic Login

Note that your application's login to QuickBooks might be either automatic or interactive. Interactive login is used when QuickBooks is already open. Access will be shared between the integrated application and the QuickBooks end user, and if multi-user mode is specified, other applications and users will have access as well. When a connection is made, QuickBooks will show a dialog window to the user, and ask the user if he/she wants to permit the connection.

Automatic login is used when QuickBooks is not already open. QuickBooks will be opened in the background, and will run until your application has finished its connection with QuickBooks. The QuickBooks user interface will not be displayed, and end-users on the same machine will be locked out. End-users on other machines, however, will be allowed access if multi-user mode is specified.

By default integrated applications do not have permission to login automatically. The first time an application interacts with QuickBooks, it must do so interactively, with QuickBooks and the company file open. The QuickBooks end user may then grant automatic login permission through Edit Preferences - Integrated Applications in the QuickBooks user interface. Click on the name of the application and then "Properties", and you may allow the application to login automatically.

For automatic login the CompanyFile must be specified. CompanyFile, ApplicationName, and other properties relating to the QuickBooks connection may be edited through QBConnectionString.

QBFileStatus: The status of the company file as it pertains to accepting connections.

This setting may be queried before attempting to connect to QuickBooks to determine the current company file status. When queried the class will attempt to determine whether a subsequent connection using the provided QBConnectionString value would succeed. Possible return values are:


0	The company file will accept the connection. This indicates that no company file is open, or the desired company file is already open.
1	The company file will not accept the connection. This indicates a different company file is already open.

QBOpenCompanyFile: The file currently open in QuickBooks.

The name of the file currently open in QuickBooks, specified completely with the path. This field is read-only.

A query is submitted to QuickBooks when the value of this property is read. The empty string will be returned if no file is open, if QuickBooks is open in an access mode incompatible with QBConnectionMode, or if an error occurs.

If the value of this property is nonempty, the class may interact exclusively with the open file.

SendRawXML: Sends specified XML to quickbooks without modification.

Available for write only. Immediately sends the specified XML over the current or default QuickBooks connection (as specified elsewhere), and returns the QBXML response. Syntax: Control1.Config("SendRawXML=<?xml version="1.0" ?>...")

SSLAcceptServerCert: The SSL certificate being used by the QuickBooks Gateway (aka Remote Connector).

The Base-64 encoded certificate being used by the Remote Connector (you may get this certificate from the Remote Connector by going to the Security tab, and clicking Export.)

This is only necessary if using a self-signed certificate, or any other certificate that has not been signed by a Certificate Authority (CA) trusted by the system.

SSLAcceptServerCertFile: The SSL certificate file being used by the QuickBooks Gateway (aka Remote Connector).

If your public key certificate is stored in a file, you may set this configuration setting to the full path of the certificate, and it will be immediately read from disk and stored in SSLAcceptServerCert. Equivalent to setting SSLAcceptServerCert to file contents.

Reading the value of this setting will return an empty string.

StopOnError: Specifies how QuickBooks is to proceed if an error occurs in processing of the current request.

If StopOnError is True (default), QuickBooks will stop processing when an error occurs. Requests that have already been processed will not be rolled back. An error is returned for the operation that caused the error condition. If StopOnError is False, QuickBooks will continue processing the remaining requests if an error occurs.

Tax1Total: Canadian field used for Goods and Services Tax, or GST.

QBXMLVersion must be set to "CA2.0", "OZ2.0", "UK2.0", or "AU2.0" to use this property.

Note: U.K. editions of QuickBooks use Tax1 for Value Added Tax (VAT) and do not use Tax2Total at all.

Tax2Total: Canadian field used for Provincial Sales Taxes, or PST.

QBXMLVersion must be set to "CA2.0", "OZ2.0", "UK2.0", or "AU2.0" to use this property.

Note: U.K. editions of QuickBooks use Tax1 for Value Added Tax (VAT) and do not use Tax2Total at all.

TimeCreated: The time the object was created.

This config setting is read-only.

TimeModified: The time the object was created.

This config setting is read-only.

UnattendedModePref: Whether connecting while QuickBooks is closed is required or optional for the user.

This setting allows you to let the user know immediately whether your application requires the ability to access QuickBooks while QuickBooks is closed.

A list of available values is provided below.


umpOptional	Causes the QuickBooks authorization dialog to display its default selections and let the user pick. Use this setting if you do not need unattended mode.
umpRequired	Causes the QuickBooks authorization dialog to display only the selection choices of "No" (no authorization) or "Yes, allow access even if QuickBooks is not running" (authorize unattended mode).

The default value is umpOptional.

WarningCodes: A comma-separated list of QuickBooks warning codes that should not result in an exception.

By default, the class will throw an exception when a status code with severity "Warn" is returned in a QuickBooks response. Set this field to a comma-separated list of status codes that should not throw an exception if returned. Note that the QuickBooks response code is not necessarily the same as the exception code from the resulting exception.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

ProcessIdleEvents: Whether the class uses its internal event loop to process events when the main thread is idle.

If set to False, the class will not fire internal idle events. Set this to False to use the class in a background thread on Mac OS. By default, this setting is True.

SelectWaitMillis: The length of time in milliseconds the class will wait when DoEvents is called if there are no events to process.

If there are no events to process when DoEvents is called, the class will wait for the amount of time specified here before returning. The default value is 20.

UseInternalSecurityAPI: Tells the class whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this setting to true tells the class to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.

To use the system security libraries for Linux, OpenSSL support must be enabled. For more information on how to enable OpenSSL, please refer to the OpenSSL Notes section.

Trappable Errors (Bill Class)

Errors

The following errors may be generated by the class. Note that frequently the error message will contain more specific information than what is listed here.

Bill Errors

101   String too long.
103   Invalid date format (YYYY-MM-DD is standard).
104   Invalid value for enumerated field.
105   Invalid integer.
106   Invalid dollar amount.
107   Invalid boolean value (must be 'true' or 'false').
108   Invalid number.
111   Invalid special characters in string.
112   Invalid special field syntax.
181   Could not load certificate file.
201   Required field unspecified.
211   Unsupported field specified.
301   Array line count must be nonnegative.
302   Array index out of bounds.
303   Invalid field index.
401   Field not accessible as a special field.
402   Write access attempted of readonly field.
403   Read access attempted of writeonly field.
421   The object cannot be modified.
511   The QBRequestId has been previously used. Please generate a new one.
601   Could not access QuickBooks.
602   Could not open specified file.
603   The version of QuickBooks currently being used is not supported.
604   QuickBooks has not been installed properly.
605   The specified file was of an incorrect version.
606   Could not start QuickBooks.
607   QuickBooks is open in a mode different than the one requested.
608   QuickBooks cannot currently be accessed.
609   An application name must be specified.
610   A file name must be specified if one is not currently open in QuickBooks.
611   Access denied.
612   QuickBooks is busy and cannot open your application in the mode requested.
699   The connection to QuickBooks has failed for an unknown reason.
702   The object requested does not exist in QuickBooks.
751   Unsupported QBXML version.
752   The QBXMLVersion chosen is insufficient to execute the request.
801   A QuickBooks internal error has occurred.
802   QuickBooks is not available due to a system-related problem.
803   The Id specified is invalid.
804   Invalid object name.
805   The name already exists in QuickBooks.
807   An object could not be found in QuickBooks.
808   A reference did not refer to an object that exists in QuickBooks.
809   The object is currently in use by the QuickBooks end user.
810   The object may not be added.
811   The object may not be updated because it is obsolete.
812   The address is invalid.
813   Permission to perform this operation is not granted.
814   The request has not been processed.
815   Time creation mismatch.
816   The feature is turned off or not enabled.
817   Permission level configured is insufficient for access.
818    The item specified was of an unknown type.
819   The object may not be changed.
820   An internal QuickBooks error has occurred.
821   An attempt was made to use a connection that was not properly initiated.
822   An attempt was made to use a connection that is invalid or was previously closed.
823   Not enough memory.
824   Unable to lock the necessary information to allow this application access to the company file. Try again later.
850   An older version of QuickBooks 2002 is being used. Please download the latest update from Intuit.
851   The QuickBooks request processor was not found. Check that QuickBooks Pro 2002 or higher is installed on your system.
861   Server error on WebExport (details follow).
862   The WebExport is impossible: an HTTP context was not found.
871   You may not set the value of QBConnectionTicket. This value is readonly.
880   Interrupted by the user.
881   An error has occurred connecting to a remote machine.
899   An unknown QuickBooks error has occurred. The message contains more details.
901   XML Parser Error. Should not occur under normal circumstances.


	101 String too long.
	103 Invalid date format (YYYY-MM-DD is standard).
	104 Invalid value for enumerated field.
	105 Invalid integer.
	106 Invalid dollar amount.
	107 Invalid boolean value (must be 'true' or 'false').
	108 Invalid number.
	111 Invalid special characters in string.
	112 Invalid special field syntax.
	181 Could not load certificate file.
	201 Required field unspecified.
	211 Unsupported field specified.
	301 Array line count must be nonnegative.
	302 Array index out of bounds.
	303 Invalid field index.
	401 Field not accessible as a special field.
	402 Write access attempted of readonly field.
	403 Read access attempted of writeonly field.
	421 The object cannot be modified.
	511 The QBRequestId has been previously used. Please generate a new one.
	601 Could not access QuickBooks.
	602 Could not open specified file.
	603 The version of QuickBooks currently being used is not supported.
	604 QuickBooks has not been installed properly.
	605 The specified file was of an incorrect version.
	606 Could not start QuickBooks.
	607 QuickBooks is open in a mode different than the one requested.
	608 QuickBooks cannot currently be accessed.
	609 An application name must be specified.
	610 A file name must be specified if one is not currently open in QuickBooks.
	611 Access denied.
	612 QuickBooks is busy and cannot open your application in the mode requested.
	699 The connection to QuickBooks has failed for an unknown reason.
	702 The object requested does not exist in QuickBooks.
	751 Unsupported QBXML version.
	752 The QBXMLVersion chosen is insufficient to execute the request.
	801 A QuickBooks internal error has occurred.
	802 QuickBooks is not available due to a system-related problem.
	803 The Id specified is invalid.
	804 Invalid object name.
	805 The name already exists in QuickBooks.
	807 An object could not be found in QuickBooks.
	808 A reference did not refer to an object that exists in QuickBooks.
	809 The object is currently in use by the QuickBooks end user.
	810 The object may not be added.
	811 The object may not be updated because it is obsolete.
	812 The address is invalid.
	813 Permission to perform this operation is not granted.
	814 The request has not been processed.
	815 Time creation mismatch.
	816 The feature is turned off or not enabled.
	817 Permission level configured is insufficient for access.
	818 The item specified was of an unknown type.
	819 The object may not be changed.
	820 An internal QuickBooks error has occurred.
	821 An attempt was made to use a connection that was not properly initiated.
	822 An attempt was made to use a connection that is invalid or was previously closed.
	823 Not enough memory.
	824 Unable to lock the necessary information to allow this application access to the company file. Try again later.
	850 An older version of QuickBooks 2002 is being used. Please download the latest update from Intuit.
	851 The QuickBooks request processor was not found. Check that QuickBooks Pro 2002 or higher is installed on your system.
	861 Server error on WebExport (details follow).
	862 The WebExport is impossible: an HTTP context was not found.
	871 You may not set the value of QBConnectionTicket. This value is readonly.
	880 Interrupted by the user.
	881 An error has occurred connecting to a remote machine.
	899 An unknown QuickBooks error has occurred. The message contains more details.
	901 XML Parser Error. Should not occur under normal circumstances.