AdjustInventory Class

Properties   Methods   Events   Config Settings   Errors  

The AdjustInventory class is used to adjust your inventory.

Syntax

AdjustInventory

Remarks

The AdjustInventory class is used to adjust your current inventory levels within QuickBooks by sending an Inventory Adjustment transaction. This class does not directly manipulate inventory items, but rather it sends and retrieves Inventory Adjustment transactions. Each Inventory Adjustment Transaction that is added to or retrieved from QuickBooks may contain one or more Adjustment Line Items. Each adjustment line is represented by a number of properties, each prefixed by "Adjustment". Any number of different inventory items may added to the Adjustment Line Items by simply increasing the AdjustmentCount and setting the Adjustment properties for each AdjustmentIndex.

When you have all the inventory items added to the Adjustment Line Items properties, set the AccountName and you can then Add the transaction to QuickBooks. Please note that only pre-existing inventory items may be adjusted. To add, get, or modify existing inventory items, please use the Item Class.

Required Fields (Add): AccountId or AccountName, and at least one Inventory Item (AdjustmentItemId or AdjustmentItemName), plus an AdjustmentNewQuantity and/or AdjustmentNewValue.

Supported Methods:Add, Get (Id), Cancel, Delete

Example class.AccountName = "Inventory Asset" '* class.Memo = "Small warehouse fire." class.AdjustmentCount = 1 class.AdjustmentItemName(0) = "Hardware:Brass Hinges" '* class.AdjustmentItemNewQuantity(0) = "130" class.Add() '*: Item must already exist in QuickBooks.

Note: The QuickBooks company file must be open in single-user mode. You cannot adjust the inventory while the company file is open in multi-user mode. Also, the QuickBooks Inventory Adjustment form must not be open, or you will receive an error.

The AdjustInventory class supports a variety of other operations as well. The class's Get, Cancel, and Delete methods may be used to retrieve, cancel, and delete Inventory Adjustment transactions. The ObjSearch Class may be used to search for Inventory Adjustments in the QuickBooks database.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AccountId Property (AdjustInventory Class)

Reference to account from which funds are being drawn.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAccountId();
int SetAccountId(const char* lpszAccountId);

Unicode (Windows)
LPWSTR GetAccountId();
INT SetAccountId(LPCWSTR lpszAccountId);

char* inqb_adjustinventory_getaccountid(void* lpObj);
int inqb_adjustinventory_setaccountid(void* lpObj, const char* lpszAccountId);

QString GetAccountId();
int SetAccountId(QString qsAccountId);

Default Value

""

Remarks

A reference to an Expense or Income account from which the Inventory Adjustment affects. For example, "Inventory Asset". Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string. This property is required.

Data Type

String

AccountName Property (AdjustInventory Class)

Reference to account from which funds are being drawn.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAccountName();
int SetAccountName(const char* lpszAccountName);

Unicode (Windows)
LPWSTR GetAccountName();
INT SetAccountName(LPCWSTR lpszAccountName);

char* inqb_adjustinventory_getaccountname(void* lpObj);
int inqb_adjustinventory_setaccountname(void* lpObj, const char* lpszAccountName);

QString GetAccountName();
int SetAccountName(QString qsAccountName);

Default Value

""

Remarks

A reference to an Expense or Income account from which the Inventory Adjustment affects. For example, "Inventory Asset". Name/Id Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its full Name (this property) or its Id, for which a corresponding property is defined. If Name is used, it must contain the full name of the object referred to, as generated by QuickBooks. For hierarchically defined objects, such as Customers, this includes the names of parent objects, and the full name can be determined by reading the FullName special field.

Setting the value of this property will set the corresponding Id property to an empty string. This property is required.

Data Type

String

AdjustmentCount Property (AdjustInventory Class)

The number of records in the Adjustment arrays.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int GetAdjustmentCount();
int SetAdjustmentCount(int iAdjustmentCount);

Unicode (Windows)
INT GetAdjustmentCount();
INT SetAdjustmentCount(INT iAdjustmentCount);

int inqb_adjustinventory_getadjustmentcount(void* lpObj);
int inqb_adjustinventory_setadjustmentcount(void* lpObj, int iAdjustmentCount);

int GetAdjustmentCount();
int SetAdjustmentCount(int iAdjustmentCount);

Default Value

0

Remarks

This property controls the size of the following arrays:

• AdjustmentItemId
• AdjustmentItemName
• AdjustmentLineId
• AdjustmentNewQuantity
• AdjustmentNewValue
• AdjustmentQuantityDifference
• AdjustmentValueDifference

The array indices start at 0 and end at AdjustmentCount - 1.

This property is not available at design time.

Data Type

Integer

AdjustmentItemId Property (AdjustInventory Class)

Line item property: Reference to the kind of item to be adjusted.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentItemId(int iAdjustmentIndex);
int SetAdjustmentItemId(int iAdjustmentIndex, const char* lpszAdjustmentItemId);

Unicode (Windows)
LPWSTR GetAdjustmentItemId(INT iAdjustmentIndex);
INT SetAdjustmentItemId(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentItemId);

char* inqb_adjustinventory_getadjustmentitemid(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentitemid(void* lpObj, int adjustmentindex, const char* lpszAdjustmentItemId);

QString GetAdjustmentItemId(int iAdjustmentIndex);
int SetAdjustmentItemId(int iAdjustmentIndex, QString qsAdjustmentItemId);

Default Value

""

Remarks

Line item property: Reference to the kind of item to be adjusted.

Adjustment Line items represent either quantity or value adjustments made on an inventory item. The AdjustmentItemId or AdjustmentItemName represent which inventory item the adjustment is acting on, and AdjustmentNewQuantity and AdjustmentNewValue properties are used to indicate how much you wish to change either the quantity or the value of the specified inventory item. AdjustmentValueDifference and AdjustmentQuantityDifference will be filled after a successful Get or Add.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

AdjustmentItemName Property (AdjustInventory Class)

Line item property: Reference to the kind of item to be adjusted.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentItemName(int iAdjustmentIndex);
int SetAdjustmentItemName(int iAdjustmentIndex, const char* lpszAdjustmentItemName);

Unicode (Windows)
LPWSTR GetAdjustmentItemName(INT iAdjustmentIndex);
INT SetAdjustmentItemName(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentItemName);

char* inqb_adjustinventory_getadjustmentitemname(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentitemname(void* lpObj, int adjustmentindex, const char* lpszAdjustmentItemName);

QString GetAdjustmentItemName(int iAdjustmentIndex);
int SetAdjustmentItemName(int iAdjustmentIndex, QString qsAdjustmentItemName);

Default Value

""

Remarks

Line item property: Reference to the kind of item to be adjusted.

Adjustment Line items represent either quantity or value adjustments made on an inventory item. The AdjustmentItemId or AdjustmentItemName represent which inventory item the adjustment is acting on, and AdjustmentNewQuantity and AdjustmentNewValue properties are used to indicate how much you wish to change either the quantity or the value of the specified inventory item. AdjustmentValueDifference and AdjustmentQuantityDifference will be filled after a successful Get or Add.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

AdjustmentLineId Property (AdjustInventory Class)

Identification number of the transaction line, returned in the response.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentLineId(int iAdjustmentIndex);
int SetAdjustmentLineId(int iAdjustmentIndex, const char* lpszAdjustmentLineId);

Unicode (Windows)
LPWSTR GetAdjustmentLineId(INT iAdjustmentIndex);
INT SetAdjustmentLineId(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentLineId);

char* inqb_adjustinventory_getadjustmentlineid(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentlineid(void* lpObj, int adjustmentindex, const char* lpszAdjustmentLineId);

QString GetAdjustmentLineId(int iAdjustmentIndex);
int SetAdjustmentLineId(int iAdjustmentIndex, QString qsAdjustmentLineId);

Default Value

""

Remarks

Identification number of the transaction line, returned in the response.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

AdjustmentNewQuantity Property (AdjustInventory Class)

Line item property: The new quantity for this adjustment.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentNewQuantity(int iAdjustmentIndex);
int SetAdjustmentNewQuantity(int iAdjustmentIndex, const char* lpszAdjustmentNewQuantity);

Unicode (Windows)
LPWSTR GetAdjustmentNewQuantity(INT iAdjustmentIndex);
INT SetAdjustmentNewQuantity(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentNewQuantity);

char* inqb_adjustinventory_getadjustmentnewquantity(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentnewquantity(void* lpObj, int adjustmentindex, const char* lpszAdjustmentNewQuantity);

QString GetAdjustmentNewQuantity(int iAdjustmentIndex);
int SetAdjustmentNewQuantity(int iAdjustmentIndex, QString qsAdjustmentNewQuantity);

Default Value

""

Remarks

Line item property: The new quantity for this adjustment.

When issuing an Inventory Quantity Adjustment or Value Adjustment, this is the new quantity for the inventory item indicated by AdjustmentItemName and AdjustmentItemId.

Either AdjustmentNewQuantity and/or AdjustmentNewValue must be specified for each Adjustment, or the class will fails with an error.

The default value of "" indicates that this property is not specified, and no new quantity will be sent.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

AdjustmentNewValue Property (AdjustInventory Class)

Line item property: New value of this adjustment.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentNewValue(int iAdjustmentIndex);
int SetAdjustmentNewValue(int iAdjustmentIndex, const char* lpszAdjustmentNewValue);

Unicode (Windows)
LPWSTR GetAdjustmentNewValue(INT iAdjustmentIndex);
INT SetAdjustmentNewValue(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentNewValue);

char* inqb_adjustinventory_getadjustmentnewvalue(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentnewvalue(void* lpObj, int adjustmentindex, const char* lpszAdjustmentNewValue);

QString GetAdjustmentNewValue(int iAdjustmentIndex);
int SetAdjustmentNewValue(int iAdjustmentIndex, QString qsAdjustmentNewValue);

Default Value

""

Remarks

Line item property: New value of this adjustment.

The new total value of these inventory items (The new value does NOT have to equal QuantityOnHand times PurchaseCost).

If this property is specified, the component will send a ValueAdjustment request for this line. The AdjustmentNewQuantity property may be set in conjunction with the AdjustmentNewValue property, and so long as AdjustmentNewValue is not empty, a ValueAdjustment request will be sent for this line. However, if AdjustmentNewValue is empty a QuantityAdjustment will be sent instead.

Either AdjustmentNewQuantity and/or AdjustmentNewValue must be specified for each Adjustment, or the class will fails with an error.

The default value of "" indicates that this property is not specified, and no new value will be sent.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

AdjustmentQuantityDifference Property (AdjustInventory Class)

Line item property: The change in quantity for this adjustment.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentQuantityDifference(int iAdjustmentIndex);
int SetAdjustmentQuantityDifference(int iAdjustmentIndex, const char* lpszAdjustmentQuantityDifference);

Unicode (Windows)
LPWSTR GetAdjustmentQuantityDifference(INT iAdjustmentIndex);
INT SetAdjustmentQuantityDifference(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentQuantityDifference);

char* inqb_adjustinventory_getadjustmentquantitydifference(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentquantitydifference(void* lpObj, int adjustmentindex, const char* lpszAdjustmentQuantityDifference);

QString GetAdjustmentQuantityDifference(int iAdjustmentIndex);
int SetAdjustmentQuantityDifference(int iAdjustmentIndex, QString qsAdjustmentQuantityDifference);

Default Value

""

Remarks

Line item property: The change in quantity for this adjustment.

After a successful Add or Get this property will contain either a positive or negative number that shows the change in quantity for this inventory item.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

AdjustmentValueDifference Property (AdjustInventory Class)

Line item property: The change in total value for this adjustment.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetAdjustmentValueDifference(int iAdjustmentIndex);
int SetAdjustmentValueDifference(int iAdjustmentIndex, const char* lpszAdjustmentValueDifference);

Unicode (Windows)
LPWSTR GetAdjustmentValueDifference(INT iAdjustmentIndex);
INT SetAdjustmentValueDifference(INT iAdjustmentIndex, LPCWSTR lpszAdjustmentValueDifference);

char* inqb_adjustinventory_getadjustmentvaluedifference(void* lpObj, int adjustmentindex);
int inqb_adjustinventory_setadjustmentvaluedifference(void* lpObj, int adjustmentindex, const char* lpszAdjustmentValueDifference);

QString GetAdjustmentValueDifference(int iAdjustmentIndex);
int SetAdjustmentValueDifference(int iAdjustmentIndex, QString qsAdjustmentValueDifference);

Default Value

""

Remarks

Line item property: The change in total value for this adjustment.

After a successful Add or Get, this read-only property will contain either a positive or negative number that shows a change in the total value of the entire stock of this inventory item.

The AdjustmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AdjustmentCount property.

This property is not available at design time.

Data Type

String

ClassId Property (AdjustInventory Class)

Reference to the class of the Inventory Adjustment.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetClassId();
int SetClassId(const char* lpszClassId);

Unicode (Windows)
LPWSTR GetClassId();
INT SetClassId(LPCWSTR lpszClassId);

char* inqb_adjustinventory_getclassid(void* lpObj);
int inqb_adjustinventory_setclassid(void* lpObj, const char* lpszClassId);

QString GetClassId();
int SetClassId(QString qsClassId);

Default Value

""

Remarks

A reference to the class of this InventoryAdjustment. Used if class tracking is being done with the QuickBooks company.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Data Type

String

ClassName Property (AdjustInventory Class)

Reference to the class of the Inventory Adjustment.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetClassName();
int SetClassName(const char* lpszClassName);

Unicode (Windows)
LPWSTR GetClassName();
INT SetClassName(LPCWSTR lpszClassName);

char* inqb_adjustinventory_getclassname(void* lpObj);
int inqb_adjustinventory_setclassname(void* lpObj, const char* lpszClassName);

QString GetClassName();
int SetClassName(QString qsClassName);

Default Value

""

Remarks

A reference to the class of this InventoryAdjustment. Used if class tracking is being done with the QuickBooks company.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Data Type

String

CustomerId Property (AdjustInventory Class)

A reference to the customer or customer job.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetCustomerId();
int SetCustomerId(const char* lpszCustomerId);

Unicode (Windows)
LPWSTR GetCustomerId();
INT SetCustomerId(LPCWSTR lpszCustomerId);

char* inqb_adjustinventory_getcustomerid(void* lpObj);
int inqb_adjustinventory_setcustomerid(void* lpObj, const char* lpszCustomerId);

QString GetCustomerId();
int SetCustomerId(QString qsCustomerId);

Default Value

""

Remarks

The Customer property indicates the Customer who has purchased goods or services from the company.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Either CustomerId or CustomerName is required.

Data Type

String

CustomerName Property (AdjustInventory Class)

A reference to the customer or customer job.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetCustomerName();
int SetCustomerName(const char* lpszCustomerName);

Unicode (Windows)
LPWSTR GetCustomerName();
INT SetCustomerName(LPCWSTR lpszCustomerName);

char* inqb_adjustinventory_getcustomername(void* lpObj);
int inqb_adjustinventory_setcustomername(void* lpObj, const char* lpszCustomerName);

QString GetCustomerName();
int SetCustomerName(QString qsCustomerName);

Default Value

""

Remarks

The Customer property indicates the Customer who has purchased goods or services from the company.

Name/Id Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its full Name (this property) or its Id, for which a corresponding property is defined. If Name is used, it must contain the full name of the object referred to, as generated by QuickBooks. For hierarchically defined objects, such as Customers, this includes the names of parent objects, and the full name can be determined by reading the FullName special field.

Setting the value of this property will set the corresponding Id property to an empty string.

Either CustomerId or CustomerName is required.

Data Type

String

Memo Property (AdjustInventory Class)

Memo to appear on internal reports only.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetMemo();
int SetMemo(const char* lpszMemo);

Unicode (Windows)
LPWSTR GetMemo();
INT SetMemo(LPCWSTR lpszMemo);

char* inqb_adjustinventory_getmemo(void* lpObj);
int inqb_adjustinventory_setmemo(void* lpObj, const char* lpszMemo);

QString GetMemo();
int SetMemo(QString qsMemo);

Default Value

""

Remarks

A memo to appear on internal reports. Will not appear to customers, vendors, etc.

Data Type

String

QBConnectionString Property (AdjustInventory Class)

An aggregate consisting of various QuickBooks connection properties.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetQBConnectionString();
int SetQBConnectionString(const char* lpszQBConnectionString);

Unicode (Windows)
LPWSTR GetQBConnectionString();
INT SetQBConnectionString(LPCWSTR lpszQBConnectionString);

char* inqb_adjustinventory_getqbconnectionstring(void* lpObj);
int inqb_adjustinventory_setqbconnectionstring(void* lpObj, const char* lpszQBConnectionString);

QString GetQBConnectionString();
int SetQBConnectionString(QString qsQBConnectionString);

Default Value

""

Remarks

QBConnectionString allows the user to customize the application's interaction with QuickBooks.

The connection properties should be formatted in a sequence as follows:

propertyname = "propertyvalue" propertyname = "propertyvalue" ...

The order is irrelevant, and the whitespace around the equal sign is optional.

The following properties are currently supported:

Data Type

String

QBRequestAggregate Property (AdjustInventory Class)

The request aggregate.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetQBRequestAggregate();
int SetQBRequestAggregate(const char* lpszQBRequestAggregate);

Unicode (Windows)
LPWSTR GetQBRequestAggregate();
INT SetQBRequestAggregate(LPCWSTR lpszQBRequestAggregate);

char* inqb_adjustinventory_getqbrequestaggregate(void* lpObj);
int inqb_adjustinventory_setqbrequestaggregate(void* lpObj, const char* lpszQBRequestAggregate);

QString GetQBRequestAggregate();
int SetQBRequestAggregate(QString qsQBRequestAggregate);

Default Value

""

Remarks

This property will be populated when QBRequestMode is set to rmOffline and a method is called. This is used when working with the QBWCServer class to generate requests to be sent to QuickBooks Web Connector.

This property is not available at design time.

Data Type

String

QBRequestId Property (AdjustInventory Class)

The Id of the next message to be sent to QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetQBRequestId();
int SetQBRequestId(const char* lpszQBRequestId);

Unicode (Windows)
LPWSTR GetQBRequestId();
INT SetQBRequestId(LPCWSTR lpszQBRequestId);

char* inqb_adjustinventory_getqbrequestid(void* lpObj);
int inqb_adjustinventory_setqbrequestid(void* lpObj, const char* lpszQBRequestId);

QString GetQBRequestId();
int SetQBRequestId(QString qsQBRequestId);

Default Value

""

Remarks

The next message Id to be sent to QuickBooks. Message Id's are used by CheckRequestStatus to check on the status of previously made requests.

This property allows the user to determine whether a previous request was successfully processed by QuickBooks. Ordinarily QuickBooks either processes requests successfully or returns an error, but in the event of a power outage or other system failure, QuickBooks might or might not have time to process a request before issuing a response.

QuickBooks stores internally a list of QBRequestIds for which it has processed a request, and updated its internal state accordingly. Use of this property in conjunction with CheckRequestStatus allows the user to query this internal list.

To enable error recovery, the user application should store the value of QBRequestId before submitting a request to QuickBooks. If a system failure occurs, CheckRequestStatus should be called with this value of QBRequestId to find whether the request was processed before the system failed.

Unique values for QBRequestId will be generated on startup and after each request to QuickBooks. The automatically generated value may be overwritten by the user. Error checking may be turned off by setting QBRequestId equal to the empty string. See CheckRequestStatus for more information on error recovery.

This property is not available at design time.

Data Type

String

QBRequestMode Property (AdjustInventory Class)

Defines whether the request is made online or stored offline.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int GetQBRequestMode();
int SetQBRequestMode(int iQBRequestMode);

Unicode (Windows)
INT GetQBRequestMode();
INT SetQBRequestMode(INT iQBRequestMode);

RM_ONLINE(0), 
RM_OFFLINE(1)

int inqb_adjustinventory_getqbrequestmode(void* lpObj);
int inqb_adjustinventory_setqbrequestmode(void* lpObj, int iQBRequestMode);

int GetQBRequestMode();
int SetQBRequestMode(int iQBRequestMode);

Default Value

0

Remarks

This property defines the behavior of the class when calling a method. Possible values are:

The use of offline mode is required when using the QBWCServer class. This allows requests to be generated and passed to QuickBooks Web Connector through the QBWCServer class.

For normal communication to QuickBooks either directly or through the QBConnector application use the default online mode.

Data Type

Integer

QBResponseAggregate Property (AdjustInventory Class)

The last QBXML response aggregate received from QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetQBResponseAggregate();
int SetQBResponseAggregate(const char* lpszQBResponseAggregate);

Unicode (Windows)
LPWSTR GetQBResponseAggregate();
INT SetQBResponseAggregate(LPCWSTR lpszQBResponseAggregate);

char* inqb_adjustinventory_getqbresponseaggregate(void* lpObj);
int inqb_adjustinventory_setqbresponseaggregate(void* lpObj, const char* lpszQBResponseAggregate);

QString GetQBResponseAggregate();
int SetQBResponseAggregate(QString qsQBResponseAggregate);

Default Value

""

Remarks

The last QBXML response aggregate received from QuickBooks. This property is set whenever a response is received from QuickBooks.

This property may also be set to a response aggregate. When set to a QBXML aggregate, such as a response from ObjSearch or QBWCServer the class will parse the response as if it had been received directly from QuickBooks and the applicable properties will be updated.

This property is not available at design time.

Data Type

String

QBXMLVersion Property (AdjustInventory Class)

The version of QBXML used in the outgoing message.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetQBXMLVersion();
int SetQBXMLVersion(const char* lpszQBXMLVersion);

Unicode (Windows)
LPWSTR GetQBXMLVersion();
INT SetQBXMLVersion(LPCWSTR lpszQBXMLVersion);

char* inqb_adjustinventory_getqbxmlversion(void* lpObj);
int inqb_adjustinventory_setqbxmlversion(void* lpObj, const char* lpszQBXMLVersion);

QString GetQBXMLVersion();
int SetQBXMLVersion(QString qsQBXMLVersion);

Default Value

"3.0"

Remarks

The version of QBXML used in the outgoing message. Except as noted in the documentation, a value of "1.1" will suffice for all requests, and for all versions of QuickBooks which support integrated applications.

With each release of QuickBooks since 2002, a corresponding version of the QuickBooks SDK has also been released: 1.0 for QuickBooks 2002, 2.0 for QuickBooks 2003, 3.0 for QuickBooks 2004, etc., up to 8.0 for QuickBooks 2009. In addition, each release of QuickBooks continues to support all earlier versions of the SDK, meaning that requests using version 1.1 of the QuickBooks SDK are supported by all versions of QuickBooks. However, new requests and newer fields in existing requests are only supported in later versions of the QuickBooks SDK. As such, it is recommended that you set the QBXMLVersion property to correspond to the version of QuickBooks you are interacting with. These values are:

In addition, versions of QuickBooks outside of the U.S. released before Quickbooks 2008 adhere to a different version of the QuickBooks SDK. These versions were updated with less frequency than the U.S. SDK, and may omit features introduced in later releases:

With the exception of Province in Address (set State) or EligibleForT4A in Vendor (set EligibleFor1099), Canadian-only fields are read-only and may be accessed with Config.

This property is not available at design time.

Data Type

String

RefId Property (AdjustInventory Class)

An alphanumerical identifier generated by the server.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetRefId();

Unicode (Windows)
LPWSTR GetRefId();

char* inqb_adjustinventory_getrefid(void* lpObj);

QString GetRefId();

Default Value

""

Remarks

An Id is an alphanumerical identifier assigned by the server whenever an object is added to QuickBooks. It is guaranteed to be unique across all objects of the same type.

This property is read-only and not available at design time.

Data Type

String

RefNumber Property (AdjustInventory Class)

Reference number for the transaction.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetRefNumber();
int SetRefNumber(const char* lpszRefNumber);

Unicode (Windows)
LPWSTR GetRefNumber();
INT SetRefNumber(LPCWSTR lpszRefNumber);

char* inqb_adjustinventory_getrefnumber(void* lpObj);
int inqb_adjustinventory_setrefnumber(void* lpObj, const char* lpszRefNumber);

QString GetRefNumber();
int SetRefNumber(QString qsRefNumber);

Default Value

""

Remarks

This is the reference number assigned to a transaction. Depending on the type of transaction, it appears in the QuickBooks user interface as Bill Number, Invoice Number, etc.

Reference numbers are alphanumeric strings and are not limited to actually being numbers.

For some types of transactions, if RefNumber is not assigned, QuickBooks will automatically assign a unique one. Reference numbers should generally be unique, but are not guaranteed to be so. It is recommended that applications generating their own reference numbers take steps to ensure their uniqueness.

Data Type

String

TransactionDate Property (AdjustInventory Class)

Date of transaction.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetTransactionDate();
int SetTransactionDate(const char* lpszTransactionDate);

Unicode (Windows)
LPWSTR GetTransactionDate();
INT SetTransactionDate(LPCWSTR lpszTransactionDate);

char* inqb_adjustinventory_gettransactiondate(void* lpObj);
int inqb_adjustinventory_settransactiondate(void* lpObj, const char* lpszTransactionDate);

QString GetTransactionDate();
int SetTransactionDate(QString qsTransactionDate);

Default Value

""

Remarks

The date of the transaction.

The standard formatting for dates is YYYY-MM-DD; i.e., September 2, 2002 is formatted as 2002-09-02. When getting the value of a date property, the date will always be in this format.

When setting the value of a date property, the formats MM-DD-YY, MM-DD-YYYY, MM/DD/YY, and MM/DD/YYYY are also acceptable. Dates in these formats will be automatically parsed and stored in YYYY-MM-DD format.

This property is required in Accounts Payable (Bill and VendorCredit) transactions. In other kinds of transactions this property is optional.

Data Type

String

Add Method (AdjustInventory Class)

Adds the Inventory Adjustment into QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Add();

Unicode (Windows)
INT Add();

int inqb_adjustinventory_add(void* lpObj);

int Add();

Remarks

Add is used to add an Inventory Adjustment transaction into to QuickBooks.

If QuickBooks is able to add the Inventory Adjustment, it will return a copy of the adjustment, and the values of all properties will be reset from the QuickBooks response. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

Please note that this class is adding an inventory adjustment transaction into QuickBooks. This is fundamentally different from modifying an inventory item. QuickBooks does not allow the direct manipulation of inventory item quantities or values, but rather it maintains a history of the transactions that modify the inventory items.

Furthermore, these transactions record only the difference in value or quantity that was added or removed. Current and previous quantities and values for inventory items are not recorded or returned. Only the difference is recorded. Please see the AdjustmentQuantityDifference and AdjustmentValueDifference properties for more information.

If QuickBooks is not able to add the Inventory Adjustment, the class will fails with an error.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Cancel Method (AdjustInventory Class)

Cancels (voids) the transaction.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Cancel();

Unicode (Windows)
INT Cancel();

int inqb_adjustinventory_cancel(void* lpObj);

int Cancel();

Remarks

Cancel causes the transaction to be voided in QuickBooks. The amount of the transaction and all line item quantities are changed to zero, and the memo is changed to "VOID:". The transaction will not, however, be deleted.

The transaction canceled in QuickBooks is the one specified by RefId. If the value of RefId is known then Get should first be called to retrieve the transaction. Otherwise the ObjSearch class should be used to search for the desired transaction in the QuickBooks database.

As the QuickBooks response to Cancel does not include the updated transaction, the values of all properties are instead set to their defaults. To get a copy of the updated transaction, the value of RefId should first be stored, and then Get should be called.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

CheckRequestStatus Method (AdjustInventory Class)

Checks whether or not the specified request was processed by QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* CheckRequestStatus(const char* lpszRequestId);

Unicode (Windows)
LPWSTR CheckRequestStatus(LPCWSTR lpszRequestId);

char* inqb_adjustinventory_checkrequeststatus(void* lpObj, const char* lpszRequestId);

QString CheckRequestStatus(const QString& qsRequestId);

Remarks

This method allows the user to determine whether a previous request was successfully processed by QuickBooks. Ordinarily QuickBooks either processes requests successfully or returns an error, but in the event of a power outage or other system failure, QuickBooks might or might not have time to process a request before issuing a response.

QuickBooks stores internally a list of QBRequestIds for which it has processed a request, and updated its internal state accordingly. Use of this method allows the user to query the list for any RequestId whose value is known.

The method returns a string corresponding to the result of the query. If the request was processed successfully, an empty string ("") will be returned. If the request was not processed, the string "Request not processed." will be returned. If the request was processed but an error occurred, a string containing the error code and a description will be returned; for example, "801: A QuickBooks internal error has occurred."

See QBRequestId for more information on error recovery.

Error Handling (C++)

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

CloseQBConnection Method (AdjustInventory Class)

Closes a persistent connection to QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int CloseQBConnection();

Unicode (Windows)
INT CloseQBConnection();

int inqb_adjustinventory_closeqbconnection(void* lpObj);

int CloseQBConnection();

Remarks

Invoking CloseQBConnection closes the QuickBooks connection specified in QBConnectionString. After the connection has been closed, the class will revert to its default behavior, and a new connection will be established for each request until QBConnectionString is invoked again.

In case the connection is already closed invoking CloseQBConnection will have no effect. Moreover, if multiple connections are open CloseQBConnection will only close the connection specified in QBConnectionString.

Be sure to always invoke this method after calling OpenQBConnection.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Config Method (AdjustInventory Class)

Sets or retrieves a configuration setting.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* Config(const char* lpszConfigurationString);

Unicode (Windows)
LPWSTR Config(LPCWSTR lpszConfigurationString);

char* inqb_adjustinventory_config(void* lpObj, const char* lpszConfigurationString);

QString Config(const QString& qsConfigurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Error Handling (C++)

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

Delete Method (AdjustInventory Class)

Deletes the record from QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Delete();

Unicode (Windows)
INT Delete();

int inqb_adjustinventory_delete(void* lpObj);

int Delete();

Remarks

Delete causes the object to be deleted in QuickBooks. After this method is called, the values of all fields will be reset to their defaults.

The object deleted in QuickBooks is the one specified by RefId. This read-only property may be assigned either by calling Get or by assigning the value of QBResponseAggregate.

A typical example: Customer.GetByName("John Smith") 'this will assign the RefId Customer.Delete() Deleting entity objects (Customer, Employee, and Vendor) requires that QuickBooks be open in single-user mode. Transaction objects, however, may be deleted while QuickBooks is in any mode.

Use this method with caution, as there is no way to recover deleted objects.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Get Method (AdjustInventory Class)

Gets a single record from QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Get(const char* lpszId);

Unicode (Windows)
INT Get(LPCWSTR lpszId);

int inqb_adjustinventory_get(void* lpObj, const char* lpszId);

int Get(const QString& qsId);

Remarks

Get may be used to retrieve a single Inventory Adjustment transaction from QuickBooks, based on its RefId. When the method is called, a search will be initiated for the requested object. If it is found, all properties of the class will be set to the information retrieved from QuickBooks. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

Please note that this class is retrieving an inventory adjustment transaction from QuickBooks. This is fundamentally different from retrieving an inventory item. QuickBooks does not allow the direct manipulation of inventory item quantities or values, but rather it maintains a history of the transactions that modify the inventory items.

Therefore this Get operation takes the Id of a previous Inventory Adjustment Add, and returns all of the adjustments made in that transaction in the Adjustment line item properties. Any quantity or value differences for a particular inventory item will show up in the AdjustmentQuantityDifference and AdjustmentValueDifference properties.

You can not set the Id parameter to the Id for an inventory item. This will result in an error. You must use the Item or ObjSearch classs to retrieve inventory items.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

GetCustomField Method (AdjustInventory Class)

Gets a custom field value from QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetCustomField(const char* lpszFieldName);

Unicode (Windows)
LPWSTR GetCustomField(LPCWSTR lpszFieldName);

char* inqb_adjustinventory_getcustomfield(void* lpObj, const char* lpszFieldName);

QString GetCustomField(const QString& qsFieldName);

Remarks

This method will get the value of a custom field, which has been defined by the user from within the QuickBooks UI.

To read the values of custom fields, be sure to set QBXMLVersion to at least "2.0" when retrieving data from QuickBooks. Then, QuickBooks will return custom field information, and it will be accessible through this method.

You may also invoke Config to read the value of custom fields. However, to set the value of custom fields you must set QBXMLVersion to at least "3.0" and invoke SetCustomField.

Error Handling (C++)

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

ImportQBXML Method (AdjustInventory Class)

Imports a QBXML response aggregate.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int ImportQBXML(const char* lpszXMLData);

Unicode (Windows)
INT ImportQBXML(LPCWSTR lpszXMLData);

int inqb_adjustinventory_importqbxml(void* lpObj, const char* lpszXMLData);

int ImportQBXML(const QString& qsXMLData);

Remarks

This method imports a QBXML response aggregate. When called with a QBXML aggregate, such as a response from ObjSearch or QBWCServer the class will parse the response as if it had been received directly from QuickBooks and the applicable properties will be updated.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

OpenQBConnection Method (AdjustInventory Class)

Opens a persistent connection to QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int OpenQBConnection();

Unicode (Windows)
INT OpenQBConnection();

int inqb_adjustinventory_openqbconnection(void* lpObj);

int OpenQBConnection();

Remarks

Invoking OpenQBConnection will open a persistent connection to QuickBooks. After invoking OpenQBConnection, all requests such as Get, Add, etc. will use the established connection until CloseQBConnection is invoked.

The effect of OpenQBConnection is to increase performance. If OpenQBConnection is not invoked, a connection to QuickBooks will automatically be created and destroyed each time the class communicates with QuickBooks. Using OpenQBConnection will be faster, particularly in the case of automatic login.

After OpenQBConnection is invoked, QuickBooks will issue a connection ticket, and it will be stored in QBConnectionString. When CloseQBConnection is invoked the ticket will be invalidated, and any further attempts to use it will fail.

Be sure to invoke CloseQBConnection when you have finished communicating with QuickBooks. Leaving an open QuickBooks connection may lock out other integrated applications, affect QuickBooks performance, or cause other problems.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Reset Method (AdjustInventory Class)

Resets all properties to their defaults.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Reset();

Unicode (Windows)
INT Reset();

int inqb_adjustinventory_reset(void* lpObj);

int Reset();

Remarks

This method resets the values of all properties (and all special fields) to their defaults.

After calling this method, the class may be reused as if it were newly created.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SetCustomField Method (AdjustInventory Class)

Sets a custom field value within QuickBooks.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int SetCustomField(const char* lpszFieldName, const char* lpszFieldValue);

Unicode (Windows)
INT SetCustomField(LPCWSTR lpszFieldName, LPCWSTR lpszFieldValue);

int inqb_adjustinventory_setcustomfield(void* lpObj, const char* lpszFieldName, const char* lpszFieldValue);

int SetCustomField(const QString& qsFieldName, const QString& qsFieldValue);

Remarks

This method requires QuickBooks 2004 or above, with QBXMLVersion set to at least "3.0".

This method will immediately set the value of a QuickBooks custom field, which has been defined by the user from within the QuickBooks UI. Before calling this method, the preceding operation must retrieve the object from QuickBooks, using Get, ObjSearch, etc. Then, you may use SetCustomField to set custom field values (the fields will be modified or added, as appropriate).

Note that invoking this method will create a connection to QuickBooks if one is not already in place.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Error Event (AdjustInventory Class)

Information about errors during data delivery.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireError(AdjustInventoryErrorEventParams *e);

typedef struct {
  int ErrorCode;
  const char *Description;
  int reserved;
} AdjustInventoryErrorEventParams;


Unicode (Windows)
virtual INT FireError(AdjustInventoryErrorEventParams *e);

typedef struct {
  INT ErrorCode;
  LPCWSTR Description;
  INT reserved;
} AdjustInventoryErrorEventParams;

#define EID_ADJUSTINVENTORY_ERROR 1

virtual INT INQB_CALL FireError(INT &iErrorCode, LPSTR &lpszDescription);

class AdjustInventoryErrorEventParams {
public:
  int ErrorCode();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Error(AdjustInventoryErrorEventParams *e);

// Or, subclass AdjustInventory and override this emitter function.
virtual int FireError(AdjustInventoryErrorEventParams *e) {...}

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (AdjustInventory Class)

Fired after the server presents its certificate to the client.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireSSLServerAuthentication(AdjustInventorySSLServerAuthenticationEventParams *e);

typedef struct {
  const char *CertEncoded;
  int lenCertEncoded;
  const char *CertSubject;
  const char *CertIssuer;
  const char *Status;
  int Accept;
  int reserved;
} AdjustInventorySSLServerAuthenticationEventParams;


Unicode (Windows)
virtual INT FireSSLServerAuthentication(AdjustInventorySSLServerAuthenticationEventParams *e);

typedef struct {
  LPCSTR CertEncoded;
  INT lenCertEncoded;
  LPCWSTR CertSubject;
  LPCWSTR CertIssuer;
  LPCWSTR Status;
  BOOL Accept;
  INT reserved;
} AdjustInventorySSLServerAuthenticationEventParams;

#define EID_ADJUSTINVENTORY_SSLSERVERAUTHENTICATION 2

virtual INT INQB_CALL FireSSLServerAuthentication(LPSTR &lpCertEncoded, INT &lenCertEncoded, LPSTR &lpszCertSubject, LPSTR &lpszCertIssuer, LPSTR &lpszStatus, BOOL &bAccept);

class AdjustInventorySSLServerAuthenticationEventParams {
public:
  const QByteArray &CertEncoded();

  const QString &CertSubject();

  const QString &CertIssuer();

  const QString &Status();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void SSLServerAuthentication(AdjustInventorySSLServerAuthenticationEventParams *e);

// Or, subclass AdjustInventory and override this emitter function.
virtual int FireSSLServerAuthentication(AdjustInventorySSLServerAuthenticationEventParams *e) {...}

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AdjustInventory Class)

Shows the progress of the secure connection.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireSSLStatus(AdjustInventorySSLStatusEventParams *e);

typedef struct {
  const char *Message;
  int reserved;
} AdjustInventorySSLStatusEventParams;


Unicode (Windows)
virtual INT FireSSLStatus(AdjustInventorySSLStatusEventParams *e);

typedef struct {
  LPCWSTR Message;
  INT reserved;
} AdjustInventorySSLStatusEventParams;

#define EID_ADJUSTINVENTORY_SSLSTATUS 3

virtual INT INQB_CALL FireSSLStatus(LPSTR &lpszMessage);

class AdjustInventorySSLStatusEventParams {
public:
  const QString &Message();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void SSLStatus(AdjustInventorySSLStatusEventParams *e);

// Or, subclass AdjustInventory and override this emitter function.
virtual int FireSSLStatus(AdjustInventorySSLStatusEventParams *e) {...}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Status Event (AdjustInventory Class)

Shows the progress of the QuickBooks connection.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireStatus(AdjustInventoryStatusEventParams *e);

typedef struct {
  const char *Message;
  int reserved;
} AdjustInventoryStatusEventParams;


Unicode (Windows)
virtual INT FireStatus(AdjustInventoryStatusEventParams *e);

typedef struct {
  LPCWSTR Message;
  INT reserved;
} AdjustInventoryStatusEventParams;

#define EID_ADJUSTINVENTORY_STATUS 4

virtual INT INQB_CALL FireStatus(LPSTR &lpszMessage);

class AdjustInventoryStatusEventParams {
public:
  const QString &Message();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Status(AdjustInventoryStatusEventParams *e);

// Or, subclass AdjustInventory and override this emitter function.
virtual int FireStatus(AdjustInventoryStatusEventParams *e) {...}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Warning Event (AdjustInventory Class)

Fired when a warning occurs.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireWarning(AdjustInventoryWarningEventParams *e);

typedef struct {
  int Code;
  const char *Description;
  int reserved;
} AdjustInventoryWarningEventParams;


Unicode (Windows)
virtual INT FireWarning(AdjustInventoryWarningEventParams *e);

typedef struct {
  INT Code;
  LPCWSTR Description;
  INT reserved;
} AdjustInventoryWarningEventParams;

#define EID_ADJUSTINVENTORY_WARNING 5

virtual INT INQB_CALL FireWarning(INT &iCode, LPSTR &lpszDescription);

class AdjustInventoryWarningEventParams {
public:
  int Code();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Warning(AdjustInventoryWarningEventParams *e);

// Or, subclass AdjustInventory and override this emitter function.
virtual int FireWarning(AdjustInventoryWarningEventParams *e) {...}

Remarks

The Warning event is fired when the class has produced, or will produce, possibly unexpected results.

Warnings may be generated by QuickBooks or the class. Starred warning codes correspond to warnings and warning codes generated by QuickBooks.

Unlisted QuickBooks warnings will cause the class to throw an exception instead.

Warning 801 will be thrown if the user attempts to Update properties that cannot be updated. For example, the following code will cause this warning to be fired: Customer1.GetByName("Joe Smith") Customer1.Email = "joe@abc.com" 'ok Customer1.CreditLimit = "200.00" 'Not used in Update operations! Customer1.Update() Only the email address will be updated, and the credit limit will be unchanged. Each property description for entity objects lists whether or not it is used in Update operations.

Config Settings (AdjustInventory Class)