When this setting is True, if the credit card being authorized does not contain sufficient funds to cover the TransactionAmount, the card will not be declined. Instead, the transaction will be authorized for a lesser amount, which is equal to the balance of the credit card. The customer must then use another form of payment to make up the remainder. The total amount authorized by Paymentech will be returned in the AuthorizedAmount configuration setting. For instance, if the TransactionAmount is $50, but credit card only has a $42 balance, the card is charged for $42.00, and the AuthorizedAmount will be "42.00". The merchant may then collect the remaining $8 in cash, check, credit card, or any other acceptable form of payment. This setting is True by default.

This data field will allow merchants to assign a unique value to their transaction that will assist them in reconciling their authorization activity to their settlement activity. This field is supported for all transactions and all IndustryTypes. The data will be stored on the Paymentech system, however only Paymentech acquired merchants will see this value in their back-end reporting (Combined Extract File). Note that the maximum length for the CustomerDefinedData is 30 characters. Strings longer than 30 characters will be truncated by the component.

After an operation this setting may be queried to return the amount authorized for that transaction. The decimal point in the returned value is implied. This is a read-only configuration setting valid only for Discover transactions.

After an operation this setting may be queried to return the code which indicates if the POS is capable of supporting a PIN. This value is determined at the host based on transaction and terminal parameter settings. This is a read-only configuration setting valid only for Discover transactions.

After an operation this setting may be queried to return the method by which the PAN was entered at the POS. This is a read-only configuration setting valid only for Discover transactions.

After an operation this setting may be queried to return the type of authorization request that was submitted to Discover. This is a read-only configuration setting valid only for Discover transactions.

After an operation this setting may be queried to return the value assigned by the host/merhant to assist in identifying a specific transaction. This is a read-only configuration setting valid only for Discover transactions.

After an operation this setting may be queried to return the condition of the track data. This is a read-only configuration setting valid only for Discover transactions.

This field is used for POS/VAR Capabilities Data. It determines the serial number of hardware device.

This field is used for POS/VAR Capabilities Data. It can be set to the binary 'OR' of one or more of the following values:

Valid values:

When this setting is 'True', the available card balance amounts will be returned via ResponseBalanceAmount1 and ResponseBalanceAmount2 and the currency codes for each amount will be returned via ResponseBalanceCurrency1 and ResponseBalanceCurrency2. This setting is 'False' by default.

If the SettlementMode is set to Host Capture, Paymentech ignores the value of the POSRetrievalNumber property and generates its own RetrievalNumber to reference the transaction. The ResponsePOSRetrievalNumber configuration setting can be used to return the value you sent in the request, but the RetrievalNumber will always contain the number used to reference the transaction.

Possible values are:

Note that for PTechReversal, 1 (Terminal Capture) will be the default value. If Host Capture is being used, a value of 0 will need to be set.

Host-Capture means that you authorize your transactions using the AuthOnly or Sale methods, and you process refunds and capture outstanding authorizations with the Credit and Capture methods. Paymentech handles all batch management. All you need to do is use the PTechHostSettle component to release the batch for settlement (you may even set your account up for Host Auto-Close, which will automatically release the batch for settlement at the end of the business day).

Terminal-Capture means that you handle all of the batch management yourself. This is necessary for the Hotel/Lodging and Restaurant IndustryTypes, because the final settlement amount may be more than (or less than) the amount that was originally authorized. For instance, a restaurant authorization may have a GratuityAmount added to the original charge before the transaction is settled. Likewise, a customer may stay longer or shorter than originally planned, or incur additional charges (mini bar, telephone call, room service, etc), and the settlement amount must be adjusted accordingly.

All industry types supported by PTechCharge may be processed in smTerminalCapture mode. However, Restaurant and Hotel transactions MUST be authorized and settled in smTerminalCapture mode. Attempting to authorize a Restaurant or Hotel/Lodging transaction with the SettlementMode; set to 0 (Host Capture) will cause the component throws an exception.

When processing transactions in smTerminalCapture mode, credits and captures are processed off-line using the PTechDetailRecord and PTechManualSettle components. Attempting to call the VoidTransaction or Capture methods the component throws an exception.

This field is used for POS/VAR Capabilities Data. It is assigned by Paymentech at the time of certification.

Default value is "010C".

System Information that all software packages must supply to the Paymentech host when sending a Batch Inquiry or Release transaction. Unless Paymentech indicates otherwise, the value of this configuration setting should not be changed. If it is changed, it should meet the specifications below.

The component will construct the System Information data based on the following specifications:

• Application Name - 7 characters
• Release Date - 6 characters (MMDDYY)
• EPROM / Version Number - 10 characters

This field is used for POS/VAR Capabilities Data. It is assigned by Paymentech at the time of certification.

Default value is "0076".

A Force (Prior) transaction is an ActivateCard, AddValue, or RedeemCard transaction submitted with an approval code obtained via the Voice Auth Center. These online transactions will only be approved if the VoiceAuthCode submitted in the request matches that of the Authorization Code generated by the Voice Auth Center.

Please note that Forced transactions cannot be voided with VoidTransaction. This is because the balance of the Gift Card is adjusted at the time of the Voice Authorization. Although this Force transaction does not have an effect on a card's balance, it is necessary in order to keep the Point Of Sale and the Host in balance with one another.

When AllowHTTPCompression is True, the component adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The component only supports gzip and deflate decompression algorithms.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the component will accept compressed data. It then will uncompress the data it has received. The component will handle data compressed by both gzip and deflate compression algorithms.

When True, the component adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the component will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the component throws an exception if the server does not support HTTP/2.

The default value is True.

This configuration setting applies only when AuthScheme is set to Negotiate. If set to True, the component will automatically use New Technology LAN Manager (NTLM) if the server does not support Negotiate authentication. Note: The server must indicate that it supports NTLM authentication through the WWW-Authenticate header for the fallback from Negotiate to NTLM to take place. The default value is False.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP component can be extended with other security schemes in addition to the authorization schemes already implemented by the component.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

If set to True, the URL passed to the component will be URL encoded. The default value is False.

This option determines what happens when the server issues a redirect. Normally, the component returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the component throws an exception.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the component throws an exception instead.

Following are the valid options:

• 0 - Never
• 1 - Always
• 2 - Same Scheme

The default value is False. If set to True, the component will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

This property specifies the HTTP version used by the component. Possible values are as follows:

• "1.0"
• "1.1" (default)
• "2.0"
• "3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the component will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/2 is supported on all versions of Windows. If the Windows version is an earlier version than Windows 8.1/Windows Server 2012 R2, the internal security implementation will be used. If the Windows version is Window 8.1/Windows Server 2012 R2 or later, the system security libraries will be used by default.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

If true, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

This configuration setting should be set when the TransferredHeaders collection is to be populated when a Header event has been fired. This value represents the number of headers that are to be saved in the collection.

To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection.

This configuration setting should be set when populating the Cookies collection as a result of an HTTP request. This value represents the number of cookies that are to be saved in the collection.

To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection.

When FollowRedirects is set to any value other than frNever, the component will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the component will fall back to using "1.1" automatically. This setting will indicate which version was used.

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the component beyond what is provided.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If User and Password are specified, this value is calculated using the algorithm specified by AuthScheme.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting returns the complete set of raw headers as sent by the client.

This configuration setting contains the result code of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

This configuration setting contains the contents of the last response from the server.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the component.

This configuration setting returns the complete set of raw headers as received from the server.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

If UseChunkedEncoding is set to True, the component will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the component will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified.

This configuration setting specifies whether the platform's deflate-algorithm implementation is used to decompress responses that use compression. If set to True (default), the platform implementation is used. If set to False, an internal implementation is used.

When using this configuration setting, if True, the component will use the default HTTP client for the platform (URLConnection in Java, WebRequest in .NET, or CFHTTPMessage in Mac/iOS) instead of the internal HTTP implementation. This is important for environments in which direct access to sockets is limited or not allowed (e.g., in the Google AppEngine).

This configuration specifies whether the component will attempt to use the Proxy auto-config URL when establishing a connection and AutoDetect is set to True.

When True (default), the component will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

This entry is for TCPClient only and does not work for other components that descend from TCPClient.

If this entry is set, the component acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component throws an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

The appropriate values are as follows:

Note: This setting is provided for use by components that do not directly expose Firewall properties.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component throws an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2.

This setting specifies the paths on disk to CA certificate files when using Mono on Unix/Linux. It is not applicable in any other circumstances.

The value is formatted as a list of paths separated by semicolons. The component will check for the existence of each file in the order specified. When a file is found the CA certificates within the file will be loaded and used to determine the validity of server or client certificates.

The default value is:

/etc/ssl/ca-bundle.pem;/etc/pki/tls/certs/ca-bundle.crt;/etc/ssl/certs/ca-certificates.crt;/etc/pki/tls/cacert.pem

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

If set to true, the component will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the component is the same.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component throws an exception.

When set to 0 (default) the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

This setting specifies whether the component will use OCSP to check the validity of the server certificate. If set to 1 or 2, the component will first obtain the OCSP URL from the server certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component throws an exception.

When set to 0 (default) the component will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

• CALG_3DES
• CALG_3DES_112
• CALG_AES
• CALG_AES_128
• CALG_AES_192
• CALG_AES_256
• CALG_AGREEDKEY_ANY
• CALG_CYLINK_MEK
• CALG_DES
• CALG_DESX
• CALG_DH_EPHEM
• CALG_DH_SF
• CALG_DSS_SIGN
• CALG_ECDH
• CALG_ECDH_EPHEM
• CALG_ECDSA
• CALG_ECMQV
• CALG_HASH_REPLACE_OWF
• CALG_HUGHES_MD5
• CALG_HMAC
• CALG_KEA_KEYX
• CALG_MAC
• CALG_MD2
• CALG_MD4
• CALG_MD5
• CALG_NO_SIGN
• CALG_OID_INFO_CNG_ONLY
• CALG_OID_INFO_PARAMETERS
• CALG_PCT1_MASTER
• CALG_RC2
• CALG_RC4
• CALG_RC5
• CALG_RSA_KEYX
• CALG_RSA_SIGN
• CALG_SCHANNEL_ENC_KEY
• CALG_SCHANNEL_MAC_KEY
• CALG_SCHANNEL_MASTER_HASH
• CALG_SEAL
• CALG_SHA
• CALG_SHA1
• CALG_SHA_256
• CALG_SHA_384
• CALG_SHA_512
• CALG_SKIPJACK
• CALG_SSL2_MASTER
• CALG_SSL3_MASTER
• CALG_SSL3_SHAMD5
• CALG_TEK
• CALG_TLS1_MASTER
• CALG_TLS1PRF

• TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
• TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
• TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
• TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
• TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
• TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
• TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
• TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
• TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_DES_CBC_SHA
• TLS_DHE_RSA_WITH_DES_CBC_SHA
• TLS_DHE_DSS_WITH_DES_CBC_SHA
• TLS_RSA_WITH_RC4_128_MD5
• TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

• TLS_AES_256_GCM_SHA384
• TLS_CHACHA20_POLY1305_SHA256
• TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the component will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

• The platform provider is only available on Windows 11 / Windows Server 2022 and up.
• SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
• If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the component when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When SSLProvider is set to Internal this value is automatically set to true. This is needed for proper validation when using the internal provider.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

This functionality is currently not available in Java or when the provider is OpenSSL.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component throws an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448"
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1"
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096"
• "ffdhe_6144"
• "ffdhe_8192"

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

• "ed25519" (default)
• "ed448" (default)
• "ecdsa_secp256r1_sha256" (default)
• "ecdsa_secp384r1_sha384" (default)
• "ecdsa_secp521r1_sha512" (default)
• "rsa_pkcs1_sha256" (default)
• "rsa_pkcs1_sha384" (default)
• "rsa_pkcs1_sha512" (default)
• "rsa_pss_sha256" (default)
• "rsa_pss_sha384" (default)
• "rsa_pss_sha512" (default)

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448" (default)
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096" (default)
• "ffdhe_6144" (default)
• "ffdhe_8192" (default)

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

When queried, this setting will return a string containing information about the product's build.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the component does not attempt to process external events.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

• Product: The product the license is for.
• Product Key: The key the license was generated from.
• License Source: Where the license was found (e.g., RuntimeLicense, License File).
• License Type: The type of license installed (e.g., Royalty Free, Single Server).
• Last Valid Build: The last valid build number for which the license will work.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to true.

Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.

If using the .NET Standard Library, this setting will be true on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all components used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.