FedExMgr Module

Properties Methods Events Config Settings Errors

Provides a way to subscribe a provider with FedEx Web Services and to register a CSP user with FedEx.

Syntax

DShippingSDK.Fedexmgr

Remarks

With this class you can perform the following:

Subscribe with FedEx to obtain a unique meter number specific to the FedEx customer's account number.
Register a CSP user and obtain a CSP end-user specific key and password.

To subscribe a customer's FedEx account number for FedEx Web Services, you will have to send a subscription request by calling the Subscribe method. This is a one-time only request. A unique FedExAccountMeterNumber specific to the customer's FedEx account number will be returned to the client. This FedExAccountMeterNumber returned in the response, should be used in all subsequent requests sent to FedEx Web Services as part of the user authentication. The response will also include which FedEx Web services are authorized (RegisteredServices) for that particular FedEx Account.

A registration process is applicable to CSP developers and users only. To register a CSP user, use the RegisterCSPUser method. Via this method, the descriptive data is sent to FedEx by the customer to obtain the end user authentication credentials required to use FedEx Web Services.

This is typically a one-time only request for each customer. A unique key and password will be returned to the client in the reply. This end user key and password (FedExAccountCSPUserKey and FedExAccountCSPUserPassword) inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services.

To use this class, you must have a valid FedEx FedExAccountAccountNumber.

The restrictions on the allowed property values are listed separately under each control property description. If the user enters more than the allowed number of characters, an error will not be generated. The control will simply pass in the characters up to the maximum amount allowed and disregard the rest. This is important since the resulting value could prevent a correct response.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


FedExAccount	Login information for FedEx.
Firewall	A set of properties related to firewall access.
Proxy	A set of properties related to proxy access.
RegisteredServices	Identifies the FedEx shipping service type(s) that the caller has been registered to use.
SenderAddress	Identifies the subscriber's address associated with the FedEx account.
SenderContact	Identifies the subscriber's contact info.
SSLAcceptServerCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertStore	This is the name of the certificate store for the client certificate.
SSLCertStorePassword	If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreType	This is the type of certificate store for this certificate.
SSLCertSubject	This is the subject of the certificate used for client authentication.
SSLProvider	This specifies the SSL/TLS implementation to use.
SSLServerCertEncoded	This is the certificate (PEM/Base64 encoded).
Timeout	A timeout for the module.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
RegisterCSPUser	Registers a CSP User.
Subscribe	Requests the unique meter number specific to the FedEx customer's account number.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Error	Information about errors during data delivery.
Notification	Notification returned by the server upon successful request (if applicable).
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


CSPProductId	Identifies the CSP product.
CSPProductVersion	Identifies the CSP product version.
CSPSolutionId	A unique identifier assigned to CSPs by FedEx.
CSPUserKey	CSP end user key.
CSPUserPassword	CSP end user password.
CustomerTransactionId	Customer transaction id.
EstimateDelivery	Determines if module will attempt to estimate the Transit Time, Delivery Date, and Delivery Day.
RawRequest	Contains the complete request sent to the Server.
RawResponse	Contains the complete response returned by the Server.
TESTMODE	This configuration setting will allow you to run test transactions.
Warning	Warning message returned by the server.
AcceptEncoding	Used to tell the server which types of content encodings the client supports.
AllowHTTPCompression	This property enables HTTP compression for receiving data.
AllowHTTPFallback	Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.
Append	Whether to append data to LocalFile.
Authorization	The Authorization string to be sent to the server.
BytesTransferred	Contains the number of bytes transferred in the response data.
ChunkSize	Specifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequest	Set to true to compress the body of a PUT or POST request.
EncodeURL	If set to True the URL will be encoded by the module.
FollowRedirects	Determines what happens when the server issues a redirect.
GetOn302Redirect	If set to True the module will perform a GET on the new location.
HTTP2HeadersWithoutIndexing	HTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersion	The version of HTTP used by the module.
IfModifiedSince	A date determining the maximum age of the desired document.
KeepAlive	Determines whether the HTTP connection is closed after completion of the request.
KerberosSPN	The Service Principal Name for the Kerberos Domain Controller.
LogLevel	The level of detail that is logged.
MaxRedirectAttempts	Limits the number of redirects that are followed in a request.
NegotiatedHTTPVersion	The negotiated HTTP version.
OtherHeaders	Other headers as determined by the user (optional).
ProxyAuthorization	The authorization string to be sent to the proxy server.
ProxyAuthScheme	The authorization scheme to be used for the proxy.
ProxyPassword	A password if authentication is to be used for the proxy.
ProxyPort	Port for the proxy server (default 80).
ProxyServer	Name or IP address of a proxy server (optional).
ProxyUser	A user name if authentication is to be used for the proxy.
SentHeaders	The full set of headers as sent by the client.
StatusCode	The status code of the last response from the server.
StatusLine	The first line of the last response from the server.
TransferredData	The contents of the last response from the server.
TransferredDataLimit	The maximum number of incoming bytes to be stored by the module.
TransferredHeaders	The full set of headers as received from the server.
TransferredRequest	The full request as sent by the client.
UseChunkedEncoding	Enables or Disables HTTP chunked encoding for transfers.
UseIDNs	Whether to encode hostnames to internationalized domain names.
UseProxyAutoConfigURL	Whether to use a Proxy auto-config file when attempting a connection.
UserAgent	Information about the user agent (browser).
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the module whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the module binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

FedExAccount Property (FedExMgr Module)

public var fedExAccount: FedExAccount {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=fedExAccountNumber,setter=setFedExAccountNumber:) NSString* fedExAccountNumber;

- (NSString*)fedExAccountNumber;
- (void)setFedExAccountNumber :(NSString*)newFedExAccountNumber;

@property (nonatomic,readwrite,assign,getter=fedExAuthorizationToken,setter=setFedExAuthorizationToken:) NSString* fedExAuthorizationToken;

- (NSString*)fedExAuthorizationToken;
- (void)setFedExAuthorizationToken :(NSString*)newFedExAuthorizationToken;

@property (nonatomic,readwrite,assign,getter=fedExCSPProductId,setter=setFedExCSPProductId:) NSString* fedExCSPProductId;

- (NSString*)fedExCSPProductId;
- (void)setFedExCSPProductId :(NSString*)newFedExCSPProductId;

@property (nonatomic,readwrite,assign,getter=fedExCSPProductVersion,setter=setFedExCSPProductVersion:) NSString* fedExCSPProductVersion;

- (NSString*)fedExCSPProductVersion;
- (void)setFedExCSPProductVersion :(NSString*)newFedExCSPProductVersion;

@property (nonatomic,readwrite,assign,getter=fedExCSPUserKey,setter=setFedExCSPUserKey:) NSString* fedExCSPUserKey;

- (NSString*)fedExCSPUserKey;
- (void)setFedExCSPUserKey :(NSString*)newFedExCSPUserKey;

@property (nonatomic,readwrite,assign,getter=fedExCSPUserPassword,setter=setFedExCSPUserPassword:) NSString* fedExCSPUserPassword;

- (NSString*)fedExCSPUserPassword;
- (void)setFedExCSPUserPassword :(NSString*)newFedExCSPUserPassword;

@property (nonatomic,readwrite,assign,getter=fedExDeveloperKey,setter=setFedExDeveloperKey:) NSString* fedExDeveloperKey;

- (NSString*)fedExDeveloperKey;
- (void)setFedExDeveloperKey :(NSString*)newFedExDeveloperKey;

@property (nonatomic,readwrite,assign,getter=fedExLanguageCode,setter=setFedExLanguageCode:) NSString* fedExLanguageCode;

- (NSString*)fedExLanguageCode;
- (void)setFedExLanguageCode :(NSString*)newFedExLanguageCode;

@property (nonatomic,readwrite,assign,getter=fedExLocaleCode,setter=setFedExLocaleCode:) NSString* fedExLocaleCode;

- (NSString*)fedExLocaleCode;
- (void)setFedExLocaleCode :(NSString*)newFedExLocaleCode;

@property (nonatomic,readwrite,assign,getter=fedExMeterNumber,setter=setFedExMeterNumber:) NSString* fedExMeterNumber;

- (NSString*)fedExMeterNumber;
- (void)setFedExMeterNumber :(NSString*)newFedExMeterNumber;

@property (nonatomic,readwrite,assign,getter=fedExPassword,setter=setFedExPassword:) NSString* fedExPassword;

- (NSString*)fedExPassword;
- (void)setFedExPassword :(NSString*)newFedExPassword;

@property (nonatomic,readwrite,assign,getter=fedExServer,setter=setFedExServer:) NSString* fedExServer;

- (NSString*)fedExServer;
- (void)setFedExServer :(NSString*)newFedExServer;

Default Value

Remarks

This property must be set when connecting to FedEx server. It contains server and login information.

Firewall Property (FedExMgr Module)

A set of properties related to firewall access.

Syntax

Swift
Objective-C

public var firewall: Firewall {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=firewallAutoDetect,setter=setFirewallAutoDetect:) BOOL firewallAutoDetect;

- (BOOL)firewallAutoDetect;
- (void)setFirewallAutoDetect :(BOOL)newFirewallAutoDetect;

@property (nonatomic,readwrite,assign,getter=firewallType,setter=setFirewallType:) int firewallType;

- (int)firewallType;
- (void)setFirewallType :(int)newFirewallType;

@property (nonatomic,readwrite,assign,getter=firewallHost,setter=setFirewallHost:) NSString* firewallHost;

- (NSString*)firewallHost;
- (void)setFirewallHost :(NSString*)newFirewallHost;

@property (nonatomic,readwrite,assign,getter=firewallPassword,setter=setFirewallPassword:) NSString* firewallPassword;

- (NSString*)firewallPassword;
- (void)setFirewallPassword :(NSString*)newFirewallPassword;

@property (nonatomic,readwrite,assign,getter=firewallPort,setter=setFirewallPort:) int firewallPort;

- (int)firewallPort;
- (void)setFirewallPort :(int)newFirewallPort;

@property (nonatomic,readwrite,assign,getter=firewallUser,setter=setFirewallUser:) NSString* firewallUser;

- (NSString*)firewallUser;
- (void)setFirewallUser :(NSString*)newFirewallUser;

Default Value

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Proxy Property (FedExMgr Module)

A set of properties related to proxy access.

Syntax

Swift
Objective-C

public var proxy: Proxy {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=proxyAuthScheme,setter=setProxyAuthScheme:) int proxyAuthScheme;

- (int)proxyAuthScheme;
- (void)setProxyAuthScheme :(int)newProxyAuthScheme;

@property (nonatomic,readwrite,assign,getter=proxyAutoDetect,setter=setProxyAutoDetect:) BOOL proxyAutoDetect;

- (BOOL)proxyAutoDetect;
- (void)setProxyAutoDetect :(BOOL)newProxyAutoDetect;

@property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword;

- (NSString*)proxyPassword;
- (void)setProxyPassword :(NSString*)newProxyPassword;

@property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort;

- (int)proxyPort;
- (void)setProxyPort :(int)newProxyPort;

@property (nonatomic,readwrite,assign,getter=proxyServer,setter=setProxyServer:) NSString* proxyServer;

- (NSString*)proxyServer;
- (void)setProxyServer :(NSString*)newProxyServer;

@property (nonatomic,readwrite,assign,getter=proxySSL,setter=setProxySSL:) int proxySSL;

- (int)proxySSL;
- (void)setProxySSL :(int)newProxySSL;

@property (nonatomic,readwrite,assign,getter=proxyUser,setter=setProxyUser:) NSString* proxyUser;

- (NSString*)proxyUser;
- (void)setProxyUser :(NSString*)newProxyUser;

Default Value

Remarks

This property contains fields describing the proxy through which the class will attempt to connect.

RegisteredServices Property (FedExMgr Module)

Identifies the FedEx shipping service type(s) that the caller has been registered to use.

Syntax

Swift
Objective-C

public var registeredServices: String {
  get {...}
}


@property (nonatomic,readonly,assign,getter=registeredServices) NSString* registeredServices;

- (NSString*)registeredServices;

Default Value

Remarks

This is populated upon successful subscription response (i.e., when the Subscribe method is called).

This property is read-only.

SenderAddress Property (FedExMgr Module)

Identifies the subscriber's address associated with the FedEx account.

Syntax

Swift
Objective-C

public var senderAddress: AddressDetail {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=senderAddress1,setter=setSenderAddress1:) NSString* senderAddress1;

- (NSString*)senderAddress1;
- (void)setSenderAddress1 :(NSString*)newSenderAddress1;

@property (nonatomic,readwrite,assign,getter=senderAddress2,setter=setSenderAddress2:) NSString* senderAddress2;

- (NSString*)senderAddress2;
- (void)setSenderAddress2 :(NSString*)newSenderAddress2;

@property (nonatomic,readwrite,assign,getter=senderCity,setter=setSenderCity:) NSString* senderCity;

- (NSString*)senderCity;
- (void)setSenderCity :(NSString*)newSenderCity;

@property (nonatomic,readwrite,assign,getter=senderCountryCode,setter=setSenderCountryCode:) NSString* senderCountryCode;

- (NSString*)senderCountryCode;
- (void)setSenderCountryCode :(NSString*)newSenderCountryCode;

@property (nonatomic,readwrite,assign,getter=senderState,setter=setSenderState:) NSString* senderState;

- (NSString*)senderState;
- (void)setSenderState :(NSString*)newSenderState;

@property (nonatomic,readwrite,assign,getter=senderZipCode,setter=setSenderZipCode:) NSString* senderZipCode;

- (NSString*)senderZipCode;
- (void)setSenderZipCode :(NSString*)newSenderZipCode;

Default Value

Remarks

This contains the descriptive data for the physical billing address for the FedExAccountAccountNumber. The SenderAddress is required to be provided before calling RegisterCSPUser or Subscribe. If this address entered with the request does not match the address information in FedEx system, the request will fail.

This must be set to an instance of the AddressDetail type, which will contain subscriber's address details. See the AddressDetail type for more information.

SenderContact Property (FedExMgr Module)

Identifies the subscriber's contact info.

Syntax

Swift
Objective-C

public var senderContact: ContactDetail {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=senderCompany,setter=setSenderCompany:) NSString* senderCompany;

- (NSString*)senderCompany;
- (void)setSenderCompany :(NSString*)newSenderCompany;

@property (nonatomic,readwrite,assign,getter=senderEmail,setter=setSenderEmail:) NSString* senderEmail;

- (NSString*)senderEmail;
- (void)setSenderEmail :(NSString*)newSenderEmail;

@property (nonatomic,readwrite,assign,getter=senderFax,setter=setSenderFax:) NSString* senderFax;

- (NSString*)senderFax;
- (void)setSenderFax :(NSString*)newSenderFax;

@property (nonatomic,readwrite,assign,getter=senderFirstName,setter=setSenderFirstName:) NSString* senderFirstName;

- (NSString*)senderFirstName;
- (void)setSenderFirstName :(NSString*)newSenderFirstName;

@property (nonatomic,readwrite,assign,getter=senderLastName,setter=setSenderLastName:) NSString* senderLastName;

- (NSString*)senderLastName;
- (void)setSenderLastName :(NSString*)newSenderLastName;

@property (nonatomic,readwrite,assign,getter=senderMiddleInitial,setter=setSenderMiddleInitial:) NSString* senderMiddleInitial;

- (NSString*)senderMiddleInitial;
- (void)setSenderMiddleInitial :(NSString*)newSenderMiddleInitial;

@property (nonatomic,readwrite,assign,getter=senderPhone,setter=setSenderPhone:) NSString* senderPhone;

- (NSString*)senderPhone;
- (void)setSenderPhone :(NSString*)newSenderPhone;

Default Value

Remarks

The SenderContact is required to be provided before calling RegisterCSPUser or Subscribe.

This must be set to an instance of the ContactDetail type, which will contain specific contact information about the point-of-contact sender. See the ContactDetail type for more information.

SSLAcceptServerCertEncoded Property (FedExMgr Module)

This is the certificate (PEM/Base64 encoded).

Syntax

Swift
Objective-C

public var sslAcceptServerCertEncoded: String {
  get {...}
  set {...}
}

public var sslAcceptServerCertEncodedB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncoded,setter=setSSLAcceptServerCertEncoded:) NSString* SSLAcceptServerCertEncoded;

- (NSString*)SSLAcceptServerCertEncoded;
- (void)setSSLAcceptServerCertEncoded :(NSString*)newSSLAcceptServerCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncodedB,setter=setSSLAcceptServerCertEncodedB:) NSData* SSLAcceptServerCertEncodedB;

- (NSData*)SSLAcceptServerCertEncodedB;
- (void)setSSLAcceptServerCertEncodedB :(NSData*)newSSLAcceptServerCertEncoded;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLAcceptServerCertEncodedB(sslAcceptServerCertEncoded: Data) throws
public func setSSLAcceptServerCertEncoded(sslAcceptServerCertEncoded: String) throws

SSLCertEncoded Property (FedExMgr Module)

This is the certificate (PEM/Base64 encoded).

Syntax

Swift
Objective-C

public var sslCertEncoded: String {
  get {...}
  set {...}
}

public var sslCertEncodedB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertEncoded,setter=setSSLCertEncoded:) NSString* SSLCertEncoded;

- (NSString*)SSLCertEncoded;
- (void)setSSLCertEncoded :(NSString*)newSSLCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLCertEncodedB,setter=setSSLCertEncodedB:) NSData* SSLCertEncodedB;

- (NSData*)SSLCertEncodedB;
- (void)setSSLCertEncodedB :(NSData*)newSSLCertEncoded;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLCertEncodedB(sslCertEncoded: Data) throws
public func setSSLCertEncoded(sslCertEncoded: String) throws

SSLCertStore Property (FedExMgr Module)

This is the name of the certificate store for the client certificate.

Syntax

Swift
Objective-C

public var sslCertStore: String {
  get {...}
  set {...}
}

public var sslCertStoreB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertStore,setter=setSSLCertStore:) NSString* SSLCertStore;

- (NSString*)SSLCertStore;
- (void)setSSLCertStore :(NSString*)newSSLCertStore;

@property (nonatomic,readwrite,assign,getter=SSLCertStoreB,setter=setSSLCertStoreB:) NSData* SSLCertStoreB;

- (NSData*)SSLCertStoreB;
- (void)setSSLCertStoreB :(NSData*)newSSLCertStore;

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

SSLCertStorePassword Property (FedExMgr Module)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

Swift
Objective-C

public var sslCertStorePassword: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertStorePassword,setter=setSSLCertStorePassword:) NSString* SSLCertStorePassword;

- (NSString*)SSLCertStorePassword;
- (void)setSSLCertStorePassword :(NSString*)newSSLCertStorePassword;

Default Value

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLCertStoreType Property (FedExMgr Module)

This is the type of certificate store for this certificate.

Syntax

Swift
Objective-C

public var sslCertStoreType: FedexmgrSSLCertStoreTypes {
  get {...}
  set {...}
}

public enum FedexmgrSSLCertStoreTypes: Int32 {
  case cstUser = 0
  case cstMachine = 1
  case cstPFXFile = 2
  case cstPFXBlob = 3
  case cstJKSFile = 4
  case cstJKSBlob = 5
  case cstPEMKeyFile = 6
  case cstPEMKeyBlob = 7
  case cstPublicKeyFile = 8
  case cstPublicKeyBlob = 9
  case cstSSHPublicKeyBlob = 10
  case cstP7BFile = 11
  case cstP7BBlob = 12
  case cstSSHPublicKeyFile = 13
  case cstPPKFile = 14
  case cstPPKBlob = 15
  case cstXMLFile = 16
  case cstXMLBlob = 17
  case cstJWKFile = 18
  case cstJWKBlob = 19
  case cstSecurityKey = 20
  case cstBCFKSFile = 21
  case cstBCFKSBlob = 22
  case cstPKCS11 = 23
  case cstAuto = 99
}


@property (nonatomic,readwrite,assign,getter=SSLCertStoreType,setter=setSSLCertStoreType:) int SSLCertStoreType;

- (int)SSLCertStoreType;
- (void)setSSLCertStoreType :(int)newSSLCertStoreType;

Default Value

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SSLCertSubject Property (FedExMgr Module)

This is the subject of the certificate used for client authentication.

Syntax

Swift
Objective-C

public var sslCertSubject: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertSubject,setter=setSSLCertSubject:) NSString* SSLCertSubject;

- (NSString*)SSLCertSubject;
- (void)setSSLCertSubject :(NSString*)newSSLCertSubject;

Default Value

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLCertSubject(sslCertSubject: String) throws

SSLProvider Property (FedExMgr Module)

This specifies the SSL/TLS implementation to use.

Syntax

Swift
Objective-C

public var sslProvider: FedexmgrSSLProviders {
  get {...}
  set {...}
}

public enum FedexmgrSSLProviders: Int32 {
  case sslpAutomatic = 0
  case sslpPlatform = 1
  case sslpInternal = 2
}


@property (nonatomic,readwrite,assign,getter=SSLProvider,setter=setSSLProvider:) int SSLProvider;

- (int)SSLProvider;
- (void)setSSLProvider :(int)newSSLProvider;

Default Value

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected the platform implementation will be used by default in all cases in the macOS edition.

SSLServerCertEncoded Property (FedExMgr Module)

This is the certificate (PEM/Base64 encoded).

Syntax

Swift
Objective-C

public var sslServerCertEncoded: String {
  get {...}
}

public var sslServerCertEncodedB: Data {
  get {...}
}


@property (nonatomic,readonly,assign,getter=SSLServerCertEncoded) NSString* SSLServerCertEncoded;

- (NSString*)SSLServerCertEncoded;

@property (nonatomic,readonly,assign,getter=SSLServerCertEncodedB) NSData* SSLServerCertEncodedB;

- (NSData*)SSLServerCertEncodedB;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLServerCertEncodedB(sslServerCertEncoded: Data) throws
public func setSSLServerCertEncoded(sslServerCertEncoded: String) throws

Timeout Property (FedExMgr Module)

A timeout for the module.

Syntax

Swift
Objective-C

public var timeout: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=timeout,setter=setTimeout:) int timeout;

- (int)timeout;
- (void)setTimeout :(int)newTimeout;

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class .

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Config Method (FedExMgr Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

RegisterCSPUser Method (FedExMgr Module)

Registers a CSP User.

Syntax

Swift
Objective-C

public func registerCSPUser() throws -> Void

- (void)registerCSPUser;

Remarks

This method is applicable to CSP developers only. This should be called to obtain a CSP end user specific key and password.

These end user credentials (unique key and password) will be obtained during integration testing and also when a customer application moves to production. They must be included with all subsequent requests, along with the provider FedExAccountDeveloperKey and FedExAccountPassword.

The following properties can be passed in the request:

FedExAccountAccountNumber (required)
FedExAccountDeveloperKey (required)
FedExAccountMeterNumber (required)
FedExAccountPassword (required)
FedExAccountServer (required)
SenderAddressAddress1 (required)
SenderAddressCity (required)
SenderAddressState (required)
SenderAddressZipCode (required)
SenderAddressCountryCode (required)
SenderContactFirstName (required)
SenderContactLastName (required)
SenderContactCompany (required)
SenderContactPhone (required)
SenderContactEmail (required)

Upon successful response, the following properties will be filled:

FedExAccountCSPUserKey
FedExAccountCSPUserPassword

Subscribe Method (FedExMgr Module)

Requests the unique meter number specific to the FedEx customer's account number.

Syntax

Swift
Objective-C

public func subscribe() throws -> Void

- (void)subscribe;

Remarks

This method is applicable to CSP and non-CSP developers.

The customer should call this method to obtain the unique meter number specific to the FedEx customer's account number for integration testing and when a customer application moves to production. This is a one-time only request to register the customer's FedEx account.

Upon successful response, a unique client device (i.e. meter number specific to the customer's FedEx account number), and RegisteredServices (which identifies the FedEx shipping service type(s) that the caller has been registered and authorized to use) will be returned to the client.

This FedExAccountMeterNumber should be used in all subsequent requests sent to FedEx web services.

Note that you must have a valid FedExAccountAccountNumber before requesting a meter number. In most cases, only one meter number is required for your shipping application. For companies with more than one shipping facility or distribution center, you must have a FedEx account number and meter number pair for each facility. For example, if you have distribution centers in California, Texas, and Florida, the label created at the Texas facility must have the account number and meter number associated with that facility. If you submit packages with labels that are generated on the California account and meter number pair, this situation may negatively impact FedEx's ability to deliver your packages in a timely and efficient manner.

The following properties can be passed in the request:

FedExAccountAccountNumber (required)
FedExAccountCSPUserKey (required for CSP developers)
FedExAccountCSPUserPassword (required for CSP developers)
CSPSolutionId (required for CSP developers)
FedExAccountDeveloperKey (required)
FedExAccountPassword (required)
FedExAccountServer (required)
SenderAddressAddress1 (required)
SenderAddressCity (required)
SenderAddressState (required)
SenderAddressZipCode (required)
SenderAddressCountryCode (required)
SenderContactFirstName (required)
SenderContactLastName (required)
SenderContactCompany (required)
SenderContactPhone (required)
SenderContactEmail (required)

Upon successful response, the following properties will be filled:

FedExAccountMeterNumber
RegisteredServices

Error Event (FedExMgr Module)

Information about errors during data delivery.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Notification Event (FedExMgr Module)

Notification returned by the server upon successful request (if applicable).

Syntax

Swift
Objective-C

func onNotification(message: String)

- (void)onNotification:(NSString*)message;

Remarks

When sending a request, the server may return with a successful reply or an error. However, even when a transaction is successful, a warning or a note might still be returned by the server. In such cases, the Notification event is fired.

Notifications returned through this event are non-fatal and shipments will still be processes, labels will still be printable, rates are still returned, etc. These notifications should be treated as informational only.

SSLServerAuthentication Event (FedExMgr Module)

Fired after the server presents its certificate to the client.

Syntax

Swift
Objective-C

func onSSLServerAuthentication(certEncoded: Data, certSubject: String, certIssuer: String, status: String, accept: inout Bool)

- (void)onSSLServerAuthentication:(NSData*)certEncoded :(NSString*)certSubject :(NSString*)certIssuer :(NSString*)status :(int*)accept;

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (FedExMgr Module)

Fired when secure connection progress messages are available.

Syntax

Swift
Objective-C

func onSSLStatus(message: String)

- (void)onSSLStatus:(NSString*)message;

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

AddressDetail Type

Represents the address details of a sender or recipient.

Remarks

This type contains descriptive data of physical location of a sender or recipient.

Example: Setting the fields of a sender SenderAddress addr = new SenderAddress addr.Address1 = "100 Somewhere St." addr.Address2 = "Ste 100" addr.City = "Raleigh" addr.State = "NC" addr.ZipCode = "27154" addr.CountryCode = "US"

The properties contained by this type are listed below.

Fields

address1
String
Default Value: ""

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS should not exceed 35 characters.

address2
String
Default Value: ""

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS should not exceed 35 characters.

addressFlags
Int32
Default Value: 0

Various flags that denote information about the address.


Value	Meaning
0x00000001	POBox - Set this flag when using a P.O. Box for the address. This flag is only used by USPSShip and USPSShipIntl addresses.
0x00000002	Residential - Whether or not the address is a residential address. This flag is only relevant for UPS and FedEx, and if this flag is not set, the address is assumed to be commercial.

city
String
Default Value: ""

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

countryCode
String
Default Value: "US"

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.


Country Name	Country Code
Afghanistan	AF
Albania	AL
American Samoa	AS
Andorra	AD
Angola	AO
Anguilla	AI
Antigua	AG*
Argentina	AR
Armenia	AM
Aruba	AW
Australia	AU
Austria	AT
Azerbaijan	AZ
Bahamas	BS
Bahrain	BH
Bangladesh	BD
Barbados	BB
Barbuda	AG*
Belarus	BY
Belgium	BE
Belize	BZ
Benin	BJ
Bermuda	BM
Bhutan	BT
Bolivia	BO
Bonaire	AN**
Bosnia-Herzegovina	BA
Botswana	BW
Brazil	BR
British Virgin Islands	VG*
Brunei	BN
Bulgaria	BG
Burkina Faso	BF
Burundi	BI
Cambodia	KH
Cameroon	CM
Canada	CA
Canary Islands	ES**
Cape Verde	CV
Cayman Islands	KY**
Chad	TD
Channel Islands	GB**
Chile	CL
China	CN
Colombia	CO
Congo	CG
Congo Dem. Rep. Of	CD
Cook Islands	CK
Costa Rica	CR
Croatia	HR
Curacao	AN**
Cyprus	CY
Czech Republic	CZ
Denmark	DK
Djibouti	DJ
Dominica	DM
Dominican Republic	DO
East Timor	TL
Ecuador	EC
Egypt	EG
El Salvador	SV
England	GB**
Equatorial Guinea	GQ
Eritrea	ER
Estonia	EE
Ethiopia	ET
Faeroe Islands	FO*
Fiji	FJ
Finland	FI
France	FR
French Guiana	GF
French Polynesia	PF**
Gabon	GA
Gambia	GM
Georgia	GE
Germany	DE
Ghana	GH
Gibraltar	GI
Grand Cayman	KY**
Great Britain	GB**
Great Thatch Island	VG*
Great Tobago Islands	VG*
Greece	GR
Greenland	GL
Grenada	GD
Guadeloupe	GP**
Guam	GU
Guatemala	GT
Guinea	GN
Guyana	GY
Haiti	HT
Holland	NL**
Honduras	HN
Hong Kong	HK
Hungary	HU
Iceland	IS
India	IN
Indonesia	ID
Iraq	IQ
Ireland	IE
Israel	IL
Italy	IT**
Ivory Coast	CI
Jamaica	JM
Japan	JP
Jordan	JO
Jost Van Dyke Islands	VG*
Kazakhstan	KZ
Kenya	KE
Kuwait	KW
Kyrgyzstan	KG
Laos	LA
Latvia	LV
Lebanon	LB
Lesotho	LS
Liberia	LR
Liechtenstein	LI
Lithuania	LT
Luxembourg	LU
Macau	MO
Macedonia	MK
Madagascar	MG
Malawi	MW
Malaysia	MY
Maldives	MV
Mali	ML
Malta	MT
Marshall Islands	MH
Martinique	MQ
Mauritania	MR
Mauritius	MU
Mexico	MX
Micronesia	FM
Moldova	MD
Monaco	MC
Mongolia	MN
Montserrat	MS
Morocco	MA
Mozambique	MZ
Namibia	NA
Nepal	NP
Netherlands	NL**
Netherlands Antilles	AN**
New Caledonia	NC
New Zealand	NZ
Nicaragua	NI
Niger	NE
Nigeria	NG
Norman Island	VG*
Northern Ireland	GB**
Northern Mariana Islands	MP**
Norway	NO
Oman	OM
Pakistan	PK
Palau	PW
Palestine	PS*
Panama	PA
Papua New Guinea	PG
Paraguay	PY
Peru	PE
Philippines	PH
Poland	PL
Portugal	PT
Puerto Rico	PR
Qatar	QA
Reunion	RE
Romania	RO
Rota	MP**
Russia	RU
Rwanda	RW
Saba	AN**
Saipan	MP**
Samoa	WS
San Marino	IT**
Saudi Arabia	SA
Scotland	GB**
Senegal	SN
Serbia & Montenegro	CS
Seychelles	SC
Singapore	SG
Slovak Republic	SK
Slovenia	SI
South Africa	ZA
South Korea	KR
Spain	ES**
Sri Lanka	LK
St. Barthelemy	GP**
St. Christopher	KN**
St. Croix Island	VI**
St. Eustatius	AN**
St. John	VI**
St. Kitts and Nevis	KN**
St. Lucia	LC
St. Maarten	AN**
St. Thomas	VI**
St. Vincent	VC**
Suriname	SR
Swaziland	SZ
Sweden	SE
Switzerland	CH
Tahiti	PF**
Taiwan	TW
Tanzania	TZ
Thailand	TH
Tinian	MP**
Togo	TG
Tonga	TO
Tortola Island	VG*
Trinidad & Tobago	TT
Tunisia	TN
Turkey	TR
Turkmenistan	TM
Turks & Caicos Islands	TC
U.S. Virgin Islands	VI**
Uganda	UG
Ukraine	UA
Union Island	VC**
United Arab Emirates	AE
United Kingdom	GB**
United States	US
Uruguay	UY
Uzbekistan	UZ
Vanuatu	VU
Vatican City	IT**
Venezuela	VE
Vietnam	VN
Wales	GB**
Wallis & Futuna Islands	WF
Yemen	YE
Zambia	ZM
Zimbabwe	ZW

* Not supported by USPS

** Has multiple values, the values used for USPS are below


Country Name	Country Code
Cayman Islands	KY
French Polynesia	PF
Guadeloupe	GP
Italy	IT
Netherlands	NL
Netherlands Antilles	AN
Northern Mariana Islands	MP
Spain	ES
St. Kitts and Nevis	KN
St. Vincent	VC
United Kingdom	GB
U.S. Virgin Islands	VI

state
String
Default Value: ""

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

zipCode
String
Default Value: ""

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both and are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Constructors

public init()

ContactDetail Type

Represents the contact information.

Remarks

This type contains descriptive data identifying the point-of-contact person (such as sender, recipient, broker, etc.).

Example: Setting the fields of the sender ContactDetail senderContact = new ContactDetail senderContact.Company = "Anything Anywhere" senderContact.FirstName = "John" senderContact.LastName = "Doe" senderContact.Phone = "1234567890" senderContact.Email = "test@test.com"

The fields contained by this type are listed below.

Fields

company
String
Default Value: ""

Identifies the contact person's company name. In a ship request, either and or are required to be provided.

email
String
Default Value: ""

Identifies the contact person's email address. Maximum length: 120.

fax
String
Default Value: ""

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

firstName
String
Default Value: ""

Sender's first name. The value of this property is required. Values for either and or must be sent.

lastName
String
Default Value: ""

Person's last name. The value of this property is required. Values for either and or must be sent. Maximum length: 45 characters for both names or company name.

middleInitial
String
Default Value: ""

Middle initial. The value of this property is optional.

phone
String
Default Value: ""

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Constructors

public init()

public init(firstName: , lastName: , phone: )

public init(firstName: , lastName: , phone: , email: )

public init(firstName: , lastName: , phone: , email: , company: )

FedExAccount Type

Represents the details of a FedEx account.

Remarks

This type contains data describing the FedEx server and login information.

Example: Setting the fields of an account FedExAccount account = new FedExAccount account.AccountNumber = "1234567" account.DeveloperKey = "my_developer_key" account.MeterNumber = "1234567" account.Password = "my_password" account.Server = "https://test.fedex.com"

The properties contained by this type are listed below.

Fields

accountNumber
String
Default Value: ""

Account number for logging in to the FedEx Server. An and will be required with each input request a user makes to a FedEx server.

The is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity.

For all transaction whether they are Ground or Express service, you will need to pass your valid 9 digit FedEx account number.

authorizationToken
String
Default Value: ""

Authorization Token used to authenticate the request.

This field should be set to the value of a bearer token obtained through OAuth 2.0. For more information on getting a bearer token, see the documentation for the OAuth component.

cspProductId
String
Default Value: ""

Identifies the CSP product.

This is applicable to CSP developers only. It is provided by FedEx to the CSP developers and it is required to be present in all requests as part of the user details along with the rest of security elements: , , , , , and .

cspProductVersion
String
Default Value: ""

Identifies the CSP product version.

cspUserKey
String
Default Value: ""

CSP end user key.

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique and that identifies that user.

This end user key and password inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services as the part of the user authentication along with the provider's (CSP) key and password ( and respectively).

cspUserPassword
String
Default Value: ""

CSP end user password.

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique and that identifies that user.

developerKey
String
Default Value: ""

Identifying part of the authentication key used for the sender's identity.

The is part of the authentication string used to verify sender's identity. This credential is used to authenticate a specific software application, so that your transactions are recognized by the FedEx back-end systems. The Developer Key is provided to you by FedEx after registration and it is the publicly known part of authentication credential. The Developer Key may also be referred to as an Authentication Key.

The , , , and will be required with each input request a user makes to a FedEx server. This is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity.

languageCode
String
Default Value: "en"

Two-letter code for the language (e.g. en, fr, etc.).

This field allows you to assign the language code. Default value is en.

localeCode
String
Default Value: "US"

Two-letter code for the region (e.g. US, CA, etc.).

Some languages require a locale code to further identify the language. Default value is US.

meterNumber
String
Default Value: ""

Meter number to use for submitting requests to the FedEx .

An and will be required with each input request a user makes to a FedEx server. The Meter Number is provided to you by FedEx when you register for service. This is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity.

password
String
Default Value: ""

Secret part of authentication key used for the sender's identity.

The is part of the authentication string used to verify sender's identity. This credential is used to authenticate a specific software application, so that your transactions are recognized by the FedEx back-end systems. The Password is provided to you by FedEx after registration and it is the private part of authentication credential, known only to the user and FedEx.

server
String
Default Value: ""

URL for the FedEx Server where the requests are sent. This is required to be provided on each transaction request sent to FedEx along with and .

The full URL (including the URL scheme normally https://) should be supplied. All test requests are sent over SSL.

The server URL for the production will be provided to you by FedEx after your application has been approved/certified by FedEx Web Integration Solutions team.

Constructors

public init()

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .

Fields

autoDetect
Bool
Default Value: False

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

firewallType
FirewallTypes
Default Value: 0

This property determines the type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. is set to 1080.

host
String
Default Value: ""

This property contains the name or IP address of firewall (optional). If a is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class .

password
String
Default Value: ""

This property contains a password if authentication is to be used when connecting through the firewall. If is specified, the and properties are used to connect and authenticate to the given firewall. If the authentication fails, the class .

port
Int32
Default Value: 0

This property contains the transmission control protocol (TCP) port for the firewall . See the description of the property for details.

Note: This property is set automatically when is set to a valid value. See the description of the property for details.

user
String
Default Value: ""

This property contains a user name if authentication is to be used connecting through a firewall. If the is specified, this property and properties are used to connect and authenticate to the given Firewall. If the authentication fails, the class .

Constructors

public init()

Proxy Type

The proxy the component will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy, such as the and the .

Fields

authScheme
ProxyAuthSchemes
Default Value: 0

This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the and properties are set.

should be set to authNone (3) when no authentication is expected.

By default, is authBasic (0), and if the and properties are set, the component will attempt basic authentication.

If is set to authDigest (1), digest authentication will be attempted instead.

If is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of and .

autoDetect
Bool
Default Value: False

This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is .

password
String
Default Value: ""

This property contains a password if authentication is to be used for the proxy.

If is set to Basic Authentication, the and are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.

If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.

port
Int32
Default Value: 80

This property contains the Transmission Control Protocol (TCP) port for the proxy (default 80). See the description of the property for details.

server
String
Default Value: ""

If a proxy is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the property is set to the corresponding address. If the search is not successful, an error is returned.

ssl
ProxySSLTypes
Default Value: 0

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:


psAutomatic (0)	Default setting. If the URL is an `https` URL, the class will use the `psTunnel` option. If the URL is an `http` URL, the class will use the `psNever` option.
psAlways (1)	The connection is always SSL enabled.
psNever (2)	The connection is not SSL enabled.
psTunnel (3)	The connection is made through a tunneling (HTTP) proxy.

user
String
Default Value: ""

This property contains a username if authentication is to be used for the proxy.

If is set to Basic Authentication, the and properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.

If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.

Constructors

public init()

public init(server: , port: )

public init(server: , port: , user: , password: )

Config Settings (FedExMgr Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

FedExSubscribe Config Settings

CSPProductId: Identifies the CSP product.

This is applicable to CSP developers only. This is provided by FedEx to the CSP developers and it is required to be present in all requests as part of the user details along with the FedExAccountAccountNumber, FedExAccountMeterNumber and CSPProductVersion.

CSPProductVersion: Identifies the CSP product version.

CSPSolutionId: A unique identifier assigned to CSPs by FedEx.

This is applicable to CSP developers only. It is provided by FedEx to the CSP developers and it is required to be present in a CSP subscription request (i.e., when the Subscribe method is called).

CSPUserKey: CSP end user key.

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique CSPUserKey and CSPUserPassword that identifies that user.

CSPUserPassword: CSP end user password.

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique CSPUserKey and CSPUserPassword that identifies that user.

CustomerTransactionId: Customer transaction id.

This element allows you to assign a unique identifier to your transaction. This element is returned in the reply and helps you match requests to replies. Maximum of 40 characters.

EstimateDelivery: Determines if class will attempt to estimate the Transit Time, Delivery Date, and Delivery Day.

If True (default), the class will attempt to estimate Transit Time, Delivery Date, and/or Delivery Day based on what information came back in the response. This does not account for non-business days, holidays, or weekend delivery and should be treated accordingly.

If False, the class will not estimate Transit Time, Delivery Date, and/or Delivery Day. Instead it will ONLY use the values returned in the response from FedEx. If a property is empty, it means that FedEx did not return this information.

RawRequest: Contains the complete request sent to the Server.

This returns the complete request as sent to the server. Used for debugging purposes.

RawResponse: Contains the complete response returned by the Server.

This returns the complete response as received from the server. Used for debugging purposes.

TESTMODE: This configuration setting will allow you to run test transactions.

When setting this configuration setting to True the transactions will be directed to the default testing end-point. component.Config("TESTMODE=true");

Default value is False, transactions are directed to the default production end-point.

Warning: Warning message returned by the server.

This might be returned by the server even upon successful response. These warnings are usually informational.

HTTP Config Settings

AcceptEncoding: Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the class adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The class only supports gzip and deflate decompression algorithms.

AllowHTTPCompression: This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the class will accept compressed data. It then will uncompress the data it has received. The class will handle data compressed by both gzip and deflate compression algorithms.

When True, the class adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback: Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the class will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the class if the server does not support HTTP/2.

The default value is True.

Append: Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization: The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred: Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize: Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest: Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL: If set to True the URL will be encoded by the class.

If set to True, the URL passed to the class will be URL encoded. The default value is False.

FollowRedirects: Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the class .

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the class instead.

Following are the valid options:

0 - Never
1 - Always
2 - Same Scheme

GetOn302Redirect: If set to True the class will perform a GET on the new location.

The default value is False. If set to True, the class will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing: HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion: The version of HTTP used by the class.

This property specifies the HTTP version used by the class. Possible values are as follows:

"1.0"
"1.1" (default)
"2.0"
"3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the class will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince: A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive: Determines whether the HTTP connection is closed after completion of the request.

If , the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If , the connection will be closed immediately after the server response is received.

The default value for KeepAlive is .

KerberosSPN: The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel: The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:


0 (None)	No events are logged.
1 (Info - default)	Informational events are logged.
2 (Verbose)	Detailed data are logged.
3 (Debug)	Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxRedirectAttempts: Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the class will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion: The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the class will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders: Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the class beyond what is provided.

ProxyAuthorization: The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

ProxyAuthScheme: The authorization scheme to be used for the proxy.