AccountNumber
String
Default Value: ""

The shipper's account number.

This field should be set to the customer number of the owner of the mail (mailed on behalf of customer).

ContractId
String
Default Value: ""

This field is used to specify the Contract Id of a Canada Post account and is used to identify a commercial contract.

When specified the negotiated rates for the contract will be used. If not specified the standard list rates will be used.

Password
String
Default Value: ""

Password for logging in to the Server.

This field must be set to the login password for your Canada Post account.

Server
String
Default Value: "https://soa-gw.canadapost.ca/"

URL for the server where the requests are sent.

By default this is set to Canada Post's production server: "https://soa-gw.canadapost.ca/"

UserId
String
Default Value: ""

User Id for logging in to the Server.

This field must be set to the login username for your Canada Post account

Address1
String
Default Value: ""

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address.

Maximum Length: 44 characters

Address2
String
Default Value: ""

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional.

Maximum Length: 44 characters

City
String
Default Value: ""

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

CountryCode
String
Default Value: "CA"

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered.

PostalCode
String
Default Value: ""

This is identifies of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country. The format for Canadian postal codes is A9A9A9.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both City and Province are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 14.

Province
String
Default Value: ""

Province or state code. This is the identifying abbreviation for Canada province, US state, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

This is required when CountryCode is either CA or US.

EffectiveDate
String (read-only)
Default Value: ""

This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

Encoded
String
Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte[]
Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

ExpirationDate
String (read-only)
Default Value: ""

This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String
Default Value: ""

This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)
Default Value: ""

This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)
Default Value: ""

This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)
Default Value: ""

This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)
Default Value: ""

This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
String
Default Value: ""

This is the password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. KeyPassword. This field can be used to read such password-protected private keys.

Note: this property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey.

PrivateKey
String (read-only)
Default Value: ""

This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
boolean (read-only)
Default Value: False

This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)
Default Value: ""

This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)
Default Value: ""

This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String
Default Value: ""

This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)
Default Value: 0

This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)
Default Value: ""

This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)
Default Value: ""

The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String
Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte[]
Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StorePassword
String
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
int
Default Value: 0

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This field can take one of the following values:

Subject
String
Default Value: ""

This is the subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

SubjectAltNames
String (read-only)
Default Value: ""

This field contains comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)
Default Value: ""

This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)
Default Value: ""

This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)
Default Value: ""

This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String
Default Value: ""

This field contains the text description of UsageFlags.

This value will be of one or more of the following strings and will be separated by commas:

• Digital Signatures
• Key Authentication
• Key Encryption
• Data Encryption
• Key Agreement
• Certificate Signing
• Key Signing

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int
Default Value: 0

This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)
Default Value: ""

This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Company
String
Default Value: ""

Identifies the contact person's company name. In a ship request, either FirstName and LastName or Company are required to be provided.

Email
String
Default Value: ""

Identifies the contact person's email address. Maximum length: 120.

Fax
String
Default Value: ""

Recipient's fax number. The value of this field is optional. No format checking is done on international fax numbers.

FirstName
String
Default Value: ""

Sender's first name. The value of this property is required. Values for either FirstName and LastName or Company must be sent.

LastName
String
Default Value: ""

Person's last name. The value of this field is required. Values for either FirstName and LastName or Company must be sent. Maximum length: 45 characters for both names or company name.

MiddleInitial
String
Default Value: ""

Middle initial. The value of this field is optional.

Phone
String
Default Value: ""

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

AutoDetect
boolean
Default Value: False

This field tells the class whether or not to automatically detect and use firewall system settings, if available.

Connection information will first be obtained from Java system properties, such as http.proxyHost and https.proxyHost. Java properties may be set in a variety of ways; please consult the Java documentation for information about how firewall and proxy values can be specified.

If no Java system properties define connection information, the class will inspect the Windows registry for connection information that may be present on the system (applicable only on Windows systems).

FirewallType
int
Default Value: 0

This field determines the type of firewall to connect through. The applicable values are as follows:

Host
String
Default Value: ""

This field contains the name or IP address of firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this field is set to the corresponding address. If the search is not successful, the class throws an exception.

Password
String
Default Value: ""

This field contains a password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Port
int
Default Value: 0

This field contains the transmission control protocol (TCP) port for the firewall Host. See the description of the Host field for details.

Note: This field is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String
Default Value: ""

This field contains a user name if authentication is to be used connecting through a firewall. If the Host is specified, this field and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, the class throws an exception.

AccountNumber
String (read-only)
Default Value: ""

This is the 10-digit customer number of who mailed the package(s).

BaseCharge
String (read-only)
Default Value: ""

This is the total base cost for all shipments on the manifest.

CCAuthCode
String (read-only)
Default Value: ""

The authorization code received from the credit card issuer.

This will only be populated if a credit card was used to pay for the postage.

CCAuthTimestamp
String (read-only)
Default Value: ""

The date and time that the credit card company authorized the transaction.

This will only be populated if a credit card was used to pay for the postage.

CCMerchantName
String (read-only)
Default Value: ""

The merchant name used when charging the credit card.

This will only be populated if a credit card was used to pay for the postage.

CCMerchantURL
String (read-only)
Default Value: ""

The URL for the merchant who charged the credit card.

This will only be populated if a credit card was used to pay for the postage.

CCNameOnCard
String (read-only)
Default Value: ""

The name on the card that was charged.

This will only be populated if a credit card was used to pay for the postage.

ContractId
String (read-only)
Default Value: ""

This is the contract number that was used for pricing this manifest.

CustomerReference
String (read-only)
Default Value: ""

This is the reference field provided by the client in the transmit shipments request.

Date
String (read-only)
Default Value: ""

This is the date the manifest was generated.

The date format is as follows YYYY-MM-DD.

DestinationPostalCode
String (read-only)
Default Value: ""

The Postal code of the post office where the shipment is to be dropped off.

GST
String (read-only)
Default Value: ""

The Good and Services Tax (GST) for all shipments on the manifest.

HST
String (read-only)
Default Value: ""

The Harmonized Sales Tax (HST) for all shipments on the manifest.

MediaType
String (read-only)
Default Value: ""

This contains the media-type attribute for the URL.

This will be populated after a call to TransmitShipments or SearchManifests.

NetCharge
String (read-only)
Default Value: ""

This is the total amount due to Canada Post for all shipments on the manifest.

OriginId
String (read-only)
Default Value: ""

This is the Canada Post identification number of the shipment's origin.

OriginName
String (read-only)
Default Value: ""

This is the descriptive name of the shipment's origin as printed on the manifest.

PayorAccountNumber
String (read-only)
Default Value: ""

This is the 10-digit customer number of the customer who is paying for the shipment. This is often the same as the ShipperAccountNumber.

PONumber
String (read-only)
Default Value: ""

This is the PO number used for billing and will be displayed on the manifest.

PST
String (read-only)
Default Value: ""

The Provincial Sales Tax (PST) for all shipments on the manifest.

ShipperAccountNumber
String (read-only)
Default Value: ""

This is the 10-digit customer number of the entity for whom the shipment was sent on behalf of.

Time
String (read-only)
Default Value: ""

This is the time when the manifest was generated.

The format for the time is HH:MM TZ.

TotalDiscount
String (read-only)
Default Value: ""

This is the total discount for all shipments on the manifest.

TotalSurcharge
String (read-only)
Default Value: ""

This is the total surcharge for all shipments on the manifest.

URL
String (read-only)
Default Value: ""

This field will contain the URL for the manifest.

This will be populated after a call to TransmitShipments or SearchManifests.

Aggregate
String
Default Value: ""

This can be used to set the entire aggregate xml for the recipient to be notified. This is only valid for ship requests only when the EmailNotification=0x00000004 is present in the ShipmentSpecialServices.

FedEx

For FedEx, this aggregate should contain descriptive data required for FedEx to provide e-mail notification to the customer regarding the shipment.

The format of this aggregate should be as follows: <EMailNotificationDetail> <PersonalMessage>personal_message</PersonalMessage> <Recipients> (this aggregate can be entered up to six times) <EMailNotificationRecipientType>recipient_type</EMailNotificationRecipientType> <EMailAddress>recipient_email</EMailAddress> <NotifyOnShipment>true_or_false</NotifyOnShipment> <NotifyOnException>true_or_false</NotifyOnException> <NotifyOnDelivery>true_or_false</NotifyOnDelivery> <Format>format_type</Format> <Localization> <LanguageCode>language_code</LanguageCode> </Localization> </Recipients> </EMailNotificationDetail>

In this aggregate, you can specify:

• a message text to be sent in the email notification (via the PersonalMessage element). This is optional.
• the type of the recipient: SHIPPER, RECIPIENT, BROKER, OTHER (via the EMailNotificationRecipientType element). This is optional.
• the recipient's email address (via the EMailAddress element). This is required.
• whether the recipient is to be notified on shipment, exception or delivery (via the NotifyOnShipment, NotifyOnException, NotifyOnDelivery elements). These are required.
• the format of the message: HTML, TEXT, WIRELESS (via the Format element). This is required.
• the language code you want the message to be sent to (via the LanguageCode element). This is optional. If not present, it will default to English (EN).

This setting is optional. If Aggregate is not set it will be automatically created by the class.

UPS

For UPS, the following JSON format is valid: { "NotificationCode": "6", "EMail": { "EMailAddress": [ "recipient1_email", (up to five recipient emails) "recipient2_email" ], "UndeliverableEMailAddress": "undeliverable_email", "FromEMailAddress": "sender_email", "FromName": "sender_name", "Memo": "message" } }

In this aggregate, you can specify:

• a notification code which describes the notification requested: "6" (Ship Notification), "7" (Exception Notification), "8" (Delivery Notification), or "2" (Return Notification). This is required.
• the recipient's email address (via the EMailAddress element). This is required.
• the undeliverable email address if to specify where an undeliverable email should be sent. This is optional.
• the email address for the reply-to address. The From field of the email will contain pkginfo@ups.com. This should be specified by the FromEMailAddress element.
• an optional from name.
• a message text to be sent in the email notification (via the Memo element). This is optional.

Note that this field does not apply for USPS and CanadaPost.

Email
String
Default Value: ""

Email address of the recipient to be notified. This is required to be provided for each recipient.

Message
String
Default Value: ""

User defined text that will be included in the email to be sent to Email. This is optional.

For FedEx, when multiple recipients exist, the message for the first recipient is the only message that will be included in the request. FedEx only allows one message for all of the recipients of the notification email.

This field is not used by USPS or Canada Post.

Name
String
Default Value: ""

The name associated with the notification.

For USPS, this name will appear in the text of the Signature Confirmation e-mail message.

This field is not applicable to FedEx, UPS, or Canada Post.

NotificationFlags
int
Default Value: 0

Identifies the type of notification requested. Valid values are:

For FedEx notifications, the following flags apply:

• On Shipment
• On Exception
• On Delivery
• On Tender
• On Estimated Delivery
• HTML
• Text

For UPS notifications, the following flags apply:

• On Shipment
• On Exception
• On Delivery
• On Return
• In Transit
• ADL
• UAP

For CanadaPost notifications, only the On Shipment, On Exception, and On Delivery apply.

This field is not used by USPS.

RecipientType
int
Default Value: 0

Identifies the set of valid email notification recipient types. Valid values are:

For FedEx, when rtShipper, rtRecipient or rtBroker are set, the email address associated with their definitions will be used and the Email specified for these types will be ignored.

For USPS, only the rtShipper and rtRecipient are valid.

This field does not apply to UPS or Canada Post notifications.

BaseCharge
String (read-only)
Default Value: ""

Actual Base Charge applicable to this package.

For FedEx, this is normally specific to the AccountNumber. It is used in the FedExShip and FedExShipIntl only. When this is used, please note that for MPS the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on the package level. In this case, the fields that store the rating information: BaseCharge, NetCharge, TotalSurcharges, and TotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the fields that store the rating information will be set to 'N/A', and in the last package (at index=PackageCount - 1, these fields will contain the rate for the whole shipment.

For UPS, this is the "transportation charge - fuel surcharge" applicable to this package. Upon a successful response, this is returned in the server reply for each package included in the shipment if SubVersion is 1701 or greater.

This is not applicable to USPS.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

CODAmount
String
Default Value: ""

The COD monetary value for the package.

For FedEx, this is applicable and required for Ground shipments only. If the shipment is using COD special service (i.e., the ShipmentSpecialServices is set to the corresponding value of COD), then the COD amount should be specified on package level for all packages that are going to use COD. If this is set, then the package will be considered as using the COD service.

Since Ground packages do not travel together and may be delivered at different times, you should add the value for the individual packages to be collected. On MPS Ground shipments, a COD return label will be generated for each package that uses COD service (stored in CODLabel).

On COD Express shipments, the COD amount should be specified on shipment level and the CODTotalAmount is required instead.

For UPS, if the CODAmount is set to a value other than "0.00", it indicates that COD special service is requested for that package. The collection type should be specified in the request via the CODType. COD special service is not valid for return service movements. Package level COD is available for shipment from US/PR to US/PR, CA to CA, and CA to US. COD service for shipment from CA to US is not allowed for PackagingType Letter/Envelope. COD special service is available for shipper's with PickupType 'Daily Pickup' or 'Drop Shipping'. Delivery Confirmation (represented by SignatureType) and COD cannot coexist on a single package.

This field is not applicable to USPS packages.

Format: Two explicit decimal positions (e.g. 100.00).

This is not applicable for Canada Post.

CODFile
String
Default Value: ""

Filename and location to save the CODLabel of this package to. This is applicable for package(s) that use the COD service.

When the CODFile is set to a valid path and filename, the contents of the CODLabel are written to disk when either the GetPackageLabel or GetShipmentLabels method is called.

This filename should have the same extension defined by LabelImageType (for example, if LabelImageType is set to PDF, then CODFile has to have .pdf extension).

If the filename exists, you can choose to overwrite it or not by setting the Overwrite config setting (which defaults to True).

This field is only applicable to FedEx shipments.

CODLabel
String (read-only)
Default Value: ""

Image of the COD return label for this package retrieved by FedEx Server upon a successful COD ship request.

This is the decoded binary image file of the COD return label, stored in memory when either the GetPackageLabel or the GetShipmentLabels method is called. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a PNG label, the data returned will be a PNG file. If you requested a thermal label, it will be a thermal label image. If the CODFile is set to a valid path and filename, the label is also saved to disk in a LabelImageType format.

Since MPS Ground packages do not travel together and may be delivered at different times, a CODLabel return label will be generated for each package that uses COD service.

On MPS Express packages, only one COD label will be generated and this will be returned on the last package of the MPS.

This field is only applicable to FedEx.

CODLabelB
byte[] (read-only)
Default Value: ""

Image of the COD return label for this package retrieved by FedEx Server upon a successful COD ship request.

This is the decoded binary image file of the COD return label, stored in memory when either the GetPackageLabel or the GetShipmentLabels method is called. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a PNG label, the data returned will be a PNG file. If you requested a thermal label, it will be a thermal label image. If the CODFile is set to a valid path and filename, the label is also saved to disk in a LabelImageType format.

Since MPS Ground packages do not travel together and may be delivered at different times, a CODLabel return label will be generated for each package that uses COD service.

On MPS Express packages, only one COD label will be generated and this will be returned on the last package of the MPS.

This field is only applicable to FedEx.

CODType
int
Default Value: 0

The code that indicates the type of funds that will be used for the COD payment for this package.

This field is only applicable to FedEx and UPS and identifies the type of funds that should be collected upon package delivery. It is required to be provided in the request only if COD is requested for this package (i.e., CODAmount is set to a value other than "0.00").

Valid values are:

Note: COD special service is not valid for return service movements.

Also note that only codtpAny (0) and codtGuaranteedFunds (2) are valid for UPS. For CanadaPost codtpAny is not valid and any type of check is accepted.

DangerousGoodsAccessible
boolean
Default Value: False

Identifies whether or not the dangerous goods being shipped are required to be accessible during delivery.

This field is only applicable to FedEx shipments, and is required to be specified when the SpecialServices contains the corresponding flag for Dangerous Goods.

There are two types of dangerous goods:

• Accessible, which may be shipped using: FedEx Priority Overnight, FedEx 1Day Freight, FedEx International Priority, FedEx International Priority Freight. The DangerousGoodsAccessible should be set to True.
• Inaccessible, which may be shipped using: FedEx Priority Overnight, FedEx Standard Overnight, FedEx 2Day, FedEx Express Saver, FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx International Priority, FedEx International Priority Freight. The DangerousGoodsAccessible should be set to False.

Note: To locate FedEx services that allow dangerous goods shipping for your origin/destination pair, use the FedExRates class by requesting rates for all available services.

DangerousGoodsOptions
int
Default Value: 0

Contains the collection of options will be used on the package level when using dangerous goods. Valid values are:

Note: This is only valid when using FedEx.

Description
String
Default Value: ""

For FedEx, this is the description that appears in the email to identify this package. This is optional.

For UPS, this is applicable and required for shipments with return service only.

This does not apply for USPS and Canada Post.

Girth
int
Default Value: 0

Measurement around the widest part of the package, perpendicular to the Length.

This field is only applicable when requesting rates for USPS packages.

Note: For parcels, Length is the measurement of the longest dimension and Width and Height make up the other two dimensions. Girth is the measurement around the thickest part of the package, perpendicular to the length. It is only required if the package is irregular and the PackagingType field is set to ptNonRectangular. (In this case Width and Height must still be set).

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the Length, Width, and Height are required for Priority Mail packages when the Size is set to psLarge.

Height
int
Default Value: 0

The height of the package to be shipped.

For FedEx, the Height is optional, but recommended, if "Your Packaging" is used as PackagingType. This is required if Length and Width are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When Width is provided in the request, then all other dimensions (Length and Height) are to be set as well.

For USPS, this only applies to GetRates and is only required if the package is irregular and the PackagingType field is set to ptNonRectangular. (In this case Width and Height must still be set). For parcels, Length is the measurement of the longest dimension and Width and Height make up the other two dimensions. Girth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the Length, Width, and Height are required for Priority Mail packages when the Size is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the Shortest dimension (3.1 digits e.g. 999.9 pattern).

Id
String
Default Value: ""

An 8-digit Unique Parcel Identification Number.

Unique number used to identify the package. This field is optional, and only applies to USPS return labels.

InsuredValue
String
Default Value: ""

Amount of insurance requested for this package. The value has 2 explicit decimal position and has a maximum of 11 characters including the decimal.

Length
int
Default Value: 0

The length of the package to be shipped.

For FedEx, the Length is optional, but recommended, if "Your Packaging" is used as PackagingType. This is required if Width and Height are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments. Length must be the longest dimension of the container.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When Width is provided in the request, then all other dimensions (Length and Height) are to be set as well.

Valid values are 0 to 108 IN and 0 to 270 CM.

For USPS, this is only required if the package is irregular and the PackagingType field is set to ptNonRectangular. (In this case Width and Height must still be set).

Note: For parcels, the Length is the measurement of the longest dimension and Width and Height make up the other two dimensions. Girth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the Length, Width, and Height are required for Priority Mail packages when the Size is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the longest dimension (3.1 digits e.g. 999.9 pattern).

NetCharge
String
Default Value: ""

Actual Net Charge applicable to this package.

For FedEx, this is normally specific to the AccountNumber. It is used in the FedExShip and FedExShipIntl classs only.

When this is used, please note that for MPS the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the fields that store the rating information: BaseCharge, NetCharge, TotalSurcharges, and TotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the fields that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these fields will contain the rate for the whole shipment.

For UPS, upon a successful response to GetRates, this is returned in the server reply for each package included in the shipment.

For USPS, this specifies the postage required for mailing a package of the indicated size and weight. If this property is not supplied, it will be calculated and returned in the response.

This will also be set when an Endicia label is returned describing how much postage was charged from the Endicia account for the package.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

PackagingType
int
Default Value: 0

The packaging type of the package being rated and/or shipped.

Possible values are:

If this is set to a value that is not applicable to a certain provider, it will automatically be set to ptNone (0).

For FedEx, this is required in a ship request when either the GetPackageLabel or GetShipmentLabels method is called. FedEx only supports one packaging type for the whole shipment, so only the PackagingType for the first package is used in label requests.

If the PackagingType is set to 31 (Your Packaging), then the dimensions of the package should be provided in the request by setting the following: Length, Width, and Height.

If the ServiceType is set to any of the FedEx Ground services (Ground or Ground Home Delivery), then the PackagingType will be automatically set to 31 (Your Packaging).

Please note that the types pt10kgBox (13) and pt25kgBox (14) are only meant for international shipments and domestic shipments outside of the United States.

For UPS, please note that when selecting PackagingType make sure this is valid for all the following: CountryCode, CountryCode, ServiceType, and all special services requested at both shipment and package level.

Also the following restrictions apply when using UPS Mail Innovations:

For USPS, this is used for getting rates and Endicia labels. For international shipments, the only valid values are: ptRectangular and ptNonRectangular.

For Canada Post, ptLetter (2) is only applicable if theContractId is set.

RatingAggregate
String (read-only)
Default Value: ""

Rating aggregate applicable to this package.

Reference
String
Default Value: ""

Indicates the package reference type and value, that associates this package (assigned by the customer).

For FedEx, this is optional to be provided in a ship request. You can enter up to 3 customer references by providing: the type(s) and value(s) in the request.

Valid values for types are:

The type and value pair(s) should be entered as a string in this format: type1:value1; type2:value2; type3:value3;. For example, if the user wants to assign 3 references to this package, the Reference should be set to: CN:123456; IN:123; SN:12;.

Reference information may also be used to track packages by reference.

For UPS, this is also optional to be provided in a ship request and valid if the origin/destination pair is US/US or PR/PR.

You can enter up to two customer references on package level by providing: the type(s) and value(s) in the request.

Valid values for types are:

The type and value pair(s) should be entered as a string in this format: 'type1:value1; type2:value2'. For example, if the user wants to assign 2 references to this package, the Reference should be set to: 'AJ:123456; TN:123'.

You can also chose to bar code the first reference number's value on the shipping label by setting the BarCodeReference to True.

Reference information may also be used to track packages by reference.

For USPS, this is only used by Endicia labels, and is used as a reference value for logs.

This is used in Canada Post to provide user-defined values, such as an internal "orderID".

ReturnReceipt
String (read-only)
Default Value: ""

Image of the receipt for a return shipment.

This is only valid for UPS, and is the decoded binary image file of the receipt, stored in memory upon successful ship response. The receipt is generated in HTML format, and if the ReturnReceiptFile is set to a valid path and filename (with .html extension), the receipt is also saved to disk.

ReturnReceiptB
byte[] (read-only)
Default Value: ""

Image of the receipt for a return shipment.

This is only valid for UPS, and is the decoded binary image file of the receipt, stored in memory upon successful ship response. The receipt is generated in HTML format, and if the ReturnReceiptFile is set to a valid path and filename (with .html extension), the receipt is also saved to disk.

ReturnReceiptFile
String
Default Value: ""

Filename and location to save the ReturnReceipt of this package to. This is applicable only if using UPS.

When the ReturnReceiptFile is set to a valid path and filename, the contents of the ReturnReceipt are written to disk upon successful response (if a return shipment).

The ReturnReceiptFile has to have .html extension.

Note: When using UPS, the HTML file references a 'page 2', this is the HTML page containing the return label. You can print this page by using the ShippingLabelHTMLDirectory and PackageShippingLabelFileHTML[i]; configuration settings.

ShippingLabel
String (read-only)
Default Value: ""

Image of the shipping label for this package returned by the Server upon a successful ship response.

This is the decoded binary image file of the shipping label, stored in memory upon successful ship response. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a GIF label, the data returned will be a GIF file. If you requested a thermal label, it will be a thermal label image. If the ShippingLabelFile is set to a valid path and filename, the label is also saved to disk in a LabelImageType format.

ShippingLabelB
byte[] (read-only)
Default Value: ""

Image of the shipping label for this package returned by the Server upon a successful ship response.

This is the decoded binary image file of the shipping label, stored in memory upon successful ship response. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a GIF label, the data returned will be a GIF file. If you requested a thermal label, it will be a thermal label image. If the ShippingLabelFile is set to a valid path and filename, the label is also saved to disk in a LabelImageType format.

ShippingLabelFile
String
Default Value: ""

Filename and location to save the ShippingLabel of this package to. When the ShippingLabelFile is set to a valid path and filename, the contents of the ShippingLabel are written to disk upon successful response.

This filename should have the same extension defined by LabelImageType (for example, if LabelImageType is set to GIF, then ShippingLabelFile has to have .gif extension).

If the filename exists, you can choose to overwrite it or not by setting the Overwrite config setting (which defaults to True).

ShippingLabelPart2
String (read-only)
Default Value: ""

Image of the part 2* of the shipping label for this package returned by the Server. This is applicable only if using UPS.

This is the decoded binary image file of the part 2* of the shipping label, stored in memory when either the GetPackageLabel or the GetShipmentLabels method is called. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a GIF label, the data returned will be a GIF file. If you requested a thermal label, it will be a thermal label image. If the ShippingLabelFile is set to a valid path and filename, the part 2* of the label is also saved to disk in a LabelImageType format.

For instance, if the ShippingLabelFile is "C:\UPSLabel.gif", the part 2* of the label will be created under: "C:\UPSLabel_Part2.gif".

Note: *Mail Innovations (MI) shipments with more than 3 commodities will receive a 2 page combination label. Part 1 of the label can be accessed via ShippingLabel field whereas Part 2 can be accessed via ShippingLabelPart2 field.

ShippingLabelPart2B
byte[] (read-only)
Default Value: ""

Image of the part 2* of the shipping label for this package returned by the Server. This is applicable only if using UPS.

This is the decoded binary image file of the part 2* of the shipping label, stored in memory when either the GetPackageLabel or the GetShipmentLabels method is called. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a GIF label, the data returned will be a GIF file. If you requested a thermal label, it will be a thermal label image. If the ShippingLabelFile is set to a valid path and filename, the part 2* of the label is also saved to disk in a LabelImageType format.

For instance, if the ShippingLabelFile is "C:\UPSLabel.gif", the part 2* of the label will be created under: "C:\UPSLabel_Part2.gif".

Note: *Mail Innovations (MI) shipments with more than 3 commodities will receive a 2 page combination label. Part 1 of the label can be accessed via ShippingLabel field whereas Part 2 can be accessed via ShippingLabelPart2 field.

SignatureType
int
Default Value: 0

Specifies one of the Delivery Signature Options requested for this package. Possible values are:

For FedEx Express shipments, the NoSignatureRequired option will not be allowed when the following special services are requested: Alcohol, Hold At Location or Dangerous Goods.

For residential FedEx Ground International shipments from Canada to the U.S., two valid signature options are allowed: NoSignatureRequired and Direct.

The impact of signature options fees may vary depending on your agreement with FedEx. Following are the definitions for FedEx:

• Service Default: In this case, the appropriate signature option will be selected for your shipping service. For example, if the package contains Dangerous Goods, the Direct signature option is chosen for you. The actual signature option applied to this package could be different than the signature option requested if a conflict occurred with other service features in the package. In this case, the value set in the request will be ignored.
• Indirect Signature Required: Indicates that an indirect signature is required upon delivery. This is allowed to residential addresses only. In this case, FedEx obtains a signature in one of three ways: from any person at the delivery address, from a neighbor, building manager, or other person at a neighboring address. The recipient can sign a FedEx door tag authorizing release of the package without anyone present. This might affect the shipping rates and/or service availability.
• Direct Signature Required: Indicates that a direct signature is required upon delivery. In this case, FedEx obtains a signature from any person at the delivery address. If no one is at the address, FedEx will reattempt delivery; Direct Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This option is not available for Hold at FedEx Location shipments. This might affect the shipping rates and/or service availability.
• Adult Signature Required: Indicates that the adult signature is required upon delivery. In this case, FedEx obtains a signature from any person at least 21 years old (government-issued photo identification required) at the delivery address. If no one is at the address, FedEx will reattempt delivery. Adult Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This might affect the shipping rates and/or service availability.

Note: In the server reply, this option may differ from that requested value due to other characteristics of the shipment.

For UPS, when delivery confirmation is requested for a package, the SignatureType should be set to a value other than 0 (stServiceDefault). The availability of this special service depends on the ServiceType. The type stIndirect is not valid for UPS packages.

Also, when using UPS Mail Innovations, delivery confirmation can be requested by setting this to stUSPSDeliveryConfirmation.

Delivery Confirmation and COD cannot coexist on a single package. Also, Delivery Confirmation option cannot be combined with the Return Services option.

For USPS, if this is not set to stServiceDefault or stNoSignatureRequired, the Signature Confirmation service will be used. Also, for Express label shipments, set this to stNoSignatureRequired to waive the signature requirements.

This does not apply for Canada Post.

Size
int
Default Value: 0

Size of the package being mailed.

This field is only used by USPS and is required for the GetRates method call.

See below for valid entries:

Note: For parcels, length; is the measurement of the longest dimension and girth is the measurement around the thickest part (perpendicular to the length). Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note: Use the Length, Height, Width and optionally Girth (irregular shaped packages only) fields to specify the dimensions of the package.

Note: only psRegular and psLarge are available when getting rates for international shipments.

SpecialServices
long
Default Value: 0

Contains the collection of special services offered on the package level. Valid values are:

For FedEx, to request any of the special services offered for a particular package in a ship request, you must set the SpecialServices of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below for FedEx:

• Appointment Delivery: Indicates that the appointment delivery special service is requested for this package. This might affect the shipping rates and/or service availability.
• Dangerous Goods: Indicates that this package contains dangerous goods. When the SpecialServices contains this flag, then the DangerousGoodsAccessible is required to be provided in the request as well. For FedEx Express services, these types of shipments are referred to as dangerous goods shipments. For FedEx Ground services, these types of shipments are referred to as hazardous materials (Hazmat) shipments. Hazmat shipments must be single package. FedEx Ground provides reliable delivery of hazardous materials in all U.S. states except Alaska and Hawaii. If you have not shipped hazardous materials with FedEx Ground before, contact your FedEx account executive first. FedEx needs to confirm that you have met government training requirements and can generate the documentation your shipments need. Additional information regarding hazardous materials shipping is provided at fedex.com/ us/services/options under the Hazardous Materials link. The Shipper's Hazardous Materials Certification report (OP-950), prints after a successful Ground close request. Please note that Hazmat shipments must be single package. If you create a multiple package (MPS) hazmat shipment, only one commodity prints on the OP-950. FedEx assesses a surcharge on each package containing dangerous goods/Hazmat materials. This might affect service availability as well.
• Dry Ice: Indicates that this package contains dry ice. FedEx assesses a surcharge on each package containing dry ice. This might affect service availability as well.
• Priority Alert: Indicates whether the priority alert special service is requested for this package. This is applicable to domestic shipments only. A per package surcharge is associated with Priority Alert. This is applicable for FedEx First Overnight and FedEx Priority Overnight. It can be associated with: Saturday Delivery, Hold Saturday, Hold at Location, Dangerous Goods, Dry Ice or Signature Service Option. Please note that Priority Alert requires a service contract. If you are interested in signing up for Priority Alert, contact your FedEx account executive.
• Non Standard Container: Indicates whether this package type is a non standard container. This might affect the shipping rates and/or service availability.
• COD: Indicates that this is a COD package. This service will affect shipping rates and service availability. This is applicable for domestic FedEx Express and Ground services, except FedEx Home Delivery premium. When shipping COD via FedEx Ground, the CODAmount and CODType must also be provided in the request.

For UPS, to request any of the special services offered for a particular package in a rate or ship request, you must set the SpecialServices of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below:

• Additional Handling: Indicates that additional handling special service is requested for this package. This might affect the shipping rates and/or service availability.
• Non Standard Container: Indicates whether this package type is to be considered a large package (a non standard container). Dimensions must be 130 to 165 inches: Length + (2 x Width) + (2 x Height). This might affect the shipping rates and/or service availability.

Some other special services on package level, such as COD, Delivery Confirmation, Insured Value, are already implemented respectively through the CODAmount and CODType, SignatureType, and InsuredValue.

This field is not applicable to USPS or Canada Post.

TotalDiscount
String (read-only)
Default Value: ""

Total Actual Discount applicable to this package.

This is normally specific to the FedEx AccountNumber. It is used in the FedExShip and FedExShipIntl classs only.

Please note that for MPS, the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the fields that store the rating information: BaseCharge, NetCharge, TotalSurcharges, and TotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the fields that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these fields will contain the rate for the whole shipment.

TotalSurcharges
String (read-only)
Default Value: ""

Total Actual Surcharges applicable to this package.

For FedEx, this is normally specific to the AccountNumber. It is used in the FedExShip and FedExShipIntl classs only.

Please note that for MPS, the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the fields that store the rating information: BaseCharge, NetCharge, TotalSurcharges, and TotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the fields that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these fields will contain the rate for the whole shipment.

For UPS, upon a successful response, this is returned in the server reply for each package included in the shipment.

This does not apply to USPS packages.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

TrackingNumber
String (read-only)
Default Value: ""

Tracking number assigned to this package. Upon successful request, this is returned in the server reply for each package included in the shipment.

Weight
String
Default Value: "0.0"

Weight of this package.

For FedEx, this is required to be provided in the request. It requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

For UPS, this is required to be provided in the request for each package contained in the shipment if PackagingType is set to a value other than 0 (UPS Letter). For Ground shipments, if the actual weight is less than 150 pounds, then the billable weight is 150 pounds. Air and 3 Day Select shipments will not be subject to a minimum billable weight. Format: it requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

Note that if the ServiceType stUPSSurePostLessThan1LB or stUPSFirstClassMail is used, or the ServiceType stUPSExpeditedMailInovations is used with the PackagingType ptMachineables, ptIrregulars, or ptStandardFlat then the weight must be specified in ounces. The WeightUnit config will be set automatically to "OZS" if not set.

For USPS, this must be the weight in pounds and ounces of the package. Package weight cannot exceed 70 pounds. (First-Class Mail cannot exceed 13 ounces. Bound Printed Matter cannot exceed 15 pounds). On international shipments, weight limits vary by country.

The format must be in "N lbs N oz", or as an integer showing the number of ounces. For example, a package with weight 6 lbs, 8 oz can be specified as "6 lbs 8 oz" or as "104".

However, in USPS, if PostageProvider is set to ppEndicia, then the format must be one explicit decimal position in ounces (i.e. N.N formatting).

For Canada Post, the weight of the parcel should be specified in kilograms (e.g. 99.999).

Width
int
Default Value: 0

The width of the package to be shipped.

For FedEx, the Width is optional, but recommended, if "Your Packaging" is used as PackagingType. This is required if Length and Height are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When Width is provided in the request, then all other dimensions (Length and Height) are to be set as well.

For USPS, this is only required if the package is irregular and the PackagingType field is set to ptNonRectangular. (In this case Width and Height must still be set).

Note: For parcels, Length is the measurement of the longest dimension and Width and Height make up the other two dimensions. Girth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the Length, Width, and Height are required for Priority Mail packages when the Size is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the second longest dimension (3.1 digits e.g. 999.9 pattern).

AuthScheme
int
Default Value: 0

This field is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the User and Password fields are set.

AuthScheme should be set to authNone (3) when no authentication is expected.

By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the component will attempt basic authentication.

If AuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If AuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this field will clear the values of User and Password.

AutoDetect
boolean
Default Value: False

This field tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Note: This setting is applicable only in Windows.

Password
String
Default Value: ""

This field contains a password if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Port
int
Default Value: 80

This field contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80). See the description of the Server field for details.

Server
String
Default Value: ""

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the Server field is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned.

SSL
int
Default Value: 0

This field determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

User
String
Default Value: ""

This field contains a username if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password fields are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.