FedExFreightShip Component

Properties   Methods   Events   Config Settings   Errors  

Allows you to generate a FedEx shipping label for any of FedEx freight services complete with addresses and barcode, or cancel a shipment.

Syntax

TibxFedExFreightShip

Remarks

Generating a shipping label can be done by calling either the GetPackageLabel or GetShipmentLabels method. You will have to specify the package information, FedEx service to be used for shipping this package, origin and destination information, and any other special services associated with the shipment (such as Saturday Pickup, Saturday Delivery, Hold At Location, etc.).

This component also allows you to delete packages included in the daily shipping log that have not already been tendered to FedEx by calling the CancelShipment method. The TrackingNumber parameter that identifies the shipment must be specified in the request along with the FedExAccountNumber.

To use this component, you must have a FedEx FedExAccountNumber. You should also have already obtained a ClientId and ClientSecret; uniquely assigned to your account by FedEx.

NOTE: FedEx requires that all applications that print shipping labels pass a series of certification tests prior to being placed in production. The full version of FedEx Integrator gives you access to a certification package that makes this process very easy. The certification package is available by request. It includes all test scenarios required by FedEx for FedEx Express and Ground (international and domestic), and Home Delivery. Through the application included in the certification package, you can generate all shipping labels for selected scenarios applicable to your shipping needs with a click of a button.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

ApprovedByCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String ApprovedByCompany = { read=FApprovedByCompany, write=FSetApprovedByCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either ApprovedByFirstName and ApprovedByLastName or ApprovedByCompany are required to be provided.

Data Type

String

ApprovedByEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String ApprovedByEmail = { read=FApprovedByEmail, write=FSetApprovedByEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

ApprovedByFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String ApprovedByFax = { read=FApprovedByFax, write=FSetApprovedByFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

ApprovedByFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String ApprovedByFirstName = { read=FApprovedByFirstName, write=FSetApprovedByFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either ApprovedByFirstName and ApprovedByLastName or ApprovedByCompany must be sent.

Data Type

String

ApprovedByLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String ApprovedByLastName = { read=FApprovedByLastName, write=FSetApprovedByLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either ApprovedByFirstName and ApprovedByLastName or ApprovedByCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

ApprovedByMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String ApprovedByMiddleInitial = { read=FApprovedByMiddleInitial, write=FSetApprovedByMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

ApprovedByPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String ApprovedByPhone = { read=FApprovedByPhone, write=FSetApprovedByPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

BrokerAddress1 Property (FedExFreightShip Component)

Street name.

Syntax

__property String BrokerAddress1 = { read=FBrokerAddress1, write=FSetBrokerAddress1 };

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS BrokerAddress1 should not exceed 35 characters.

Data Type

String

BrokerAddress2 Property (FedExFreightShip Component)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

__property String BrokerAddress2 = { read=FBrokerAddress2, write=FSetBrokerAddress2 };

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS BrokerAddress2 should not exceed 35 characters.

Data Type

String

BrokerAddressFlags Property (FedExFreightShip Component)

Various flags that denote information about the address.

Syntax

__property int BrokerAddressFlags = { read=FBrokerAddressFlags, write=FSetBrokerAddressFlags };

Default Value

0

Remarks

Various flags that denote information about the address.

Data Type

Integer

BrokerCity Property (FedExFreightShip Component)

Name of city, town, etc.

Syntax

__property String BrokerCity = { read=FBrokerCity, write=FSetBrokerCity };

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

BrokerCountryCode Property (FedExFreightShip Component)

Country code.

Syntax

__property String BrokerCountryCode = { read=FBrokerCountryCode, write=FSetBrokerCountryCode };

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

BrokerState Property (FedExFreightShip Component)

State or province code.

Syntax

__property String BrokerState = { read=FBrokerState, write=FSetBrokerState };

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

BrokerZipCode Property (FedExFreightShip Component)

Postal code.

Syntax

__property String BrokerZipCode = { read=FBrokerZipCode, write=FSetBrokerZipCode };

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both BrokerCity and BrokerState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

BrokerCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String BrokerCompany = { read=FBrokerCompany, write=FSetBrokerCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either BrokerFirstName and BrokerLastName or BrokerCompany are required to be provided.

Data Type

String

BrokerEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String BrokerEmail = { read=FBrokerEmail, write=FSetBrokerEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

BrokerFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String BrokerFax = { read=FBrokerFax, write=FSetBrokerFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

BrokerFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String BrokerFirstName = { read=FBrokerFirstName, write=FSetBrokerFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either BrokerFirstName and BrokerLastName or BrokerCompany must be sent.

Data Type

String

BrokerLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String BrokerLastName = { read=FBrokerLastName, write=FSetBrokerLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either BrokerFirstName and BrokerLastName or BrokerCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

BrokerMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String BrokerMiddleInitial = { read=FBrokerMiddleInitial, write=FSetBrokerMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

BrokerPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String BrokerPhone = { read=FBrokerPhone, write=FSetBrokerPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

BrokerType Property (FedExFreightShip Component)

Identifies the broker type.

Syntax

__property TibxFedExFreightShipBrokerTypes BrokerType = { read=FBrokerType, write=FSetBrokerType };

enum TibxFedExFreightShipBrokerTypes {
  btUnassigned=0,
  btExport=1,
  btImport=2
};

Default Value

btUnassigned

Remarks

When shipping internationally, the customer might want to have their own broker to deal with the delivery (for customs purposes). To request such service, the BrokerSelect option should be set in the ShipmentSpecialServices value. This allows you to designate a specific customs broker other than FedEx (or a FedEx designated broker). This is applicable to the following international FedEx services:

• stFedExInternationalPriority (20)
• stFedExInternationalEconomy (21)
• stFedExInternationalPriorityFreight (23)
• stFedExInternationalEconomyFreight (24)
• stFedExInternationalPriorityExpress (32)
• stFedExInternationalConnectPlus (33)

FedEx International Broker Select is a contract service. Before you begin using FedEx International Broker Select (BSO), you must contact your FedEx account executive to be enrolled for this service. An additional routing surcharge applies to your BSO shipments if you choose to have FedEx complete delivery after customs clearance and if your recipient and customs broker are served by different FedEx clearance points. This service is not valid with SaturdayPickup/SaturdayDelivery services. When this service is requested, then the ClearanceBrokerageType, BrokerType, BrokerContact, and BrokerAddress are required to be provided in the ship request as well.

Note: Certain customs limitations may apply for BSO shipments. Contact FedEx Express International customer service at 1.800.247.4747 for requirements.

Possible values are:

Note this only applies when shipping internationally.

Data Type

Integer

CarrierType Property (FedExFreightShip Component)

The carrier type.

Syntax

__property TibxFedExFreightShipCarrierTypes CarrierType = { read=FCarrierType, write=FSetCarrierType };

enum TibxFedExFreightShipCarrierTypes {
  ctFDXC=0,
  ctFDXE=1,
  ctFDXG=2,
  ctFXCC=3,
  ctFXFR=4,
  ctFXSP=5
};

Default Value

ctFDXE

Remarks

This specifies the carrier to be used when calling SchedulePickup, or CancelPickup.

The possible values are as follows:

Data Type

Integer

ClearanceBrokerageType Property (FedExFreightShip Component)

Specifies the type of brokerage to be applied to a shipment.

Syntax

__property TibxFedExFreightShipClearanceBrokerageTypes ClearanceBrokerageType = { read=FClearanceBrokerageType, write=FSetClearanceBrokerageType };

enum TibxFedExFreightShipClearanceBrokerageTypes {
  cbUnassigned=0,
  cbInclusive=1,
  cbInclusiveNonResidentImporter=2,
  cbSelect=3,
  cbSelectNonResidentImporter=4
};

Default Value

cbUnassigned

Remarks

When shipping internationally, the customer might want to have their own broker to deal with the delivery (for customs purposes). To request such service, the BrokerSelect option should be set in the ShipmentSpecialServices value. This allows you to designate a specific customs broker other than FedEx (or a FedEx designated broker). This is applicable to the following international FedEx services:

• stFedExInternationalPriority (20)
• stFedExInternationalEconomy (21)
• stFedExInternationalPriorityFreight (23)
• stFedExInternationalEconomyFreight (24)
• stFedExInternationalPriorityExpress (32)
• stFedExInternationalConnectPlus (33)

FedEx International Broker Select is a contract service. Before you begin using FedEx International Broker Select (BSO), you must contact your FedEx account executive to be enrolled for this service. An additional routing surcharge applies to your BSO shipments if you choose to have FedEx complete delivery after customs clearance and if your recipient and customs broker are served by different FedEx clearance points. This service is not valid with SaturdayPickup/SaturdayDelivery services. When this service is requested, then the ClearanceBrokerageType, BrokerType, BrokerContact, and BrokerAddress are required to be provided in the ship request as well.

Note: Certain customs limitations may apply for BSO shipments. Contact FedEx Express International customer service at 1.800.247.4747 for requirements.

Possible values are:

Note this only applies when shipping internationally.

Data Type

Integer

CODLabel Property (FedExFreightShip Component)

The label that is returned.

Syntax

__property String CODLabel = { read=FCODLabel };

Default Value

""

Remarks

If CODLabelFile is not set the image for the COD label this will be used to store the COD label.

Note that this will only be set if COD is used on the shipment level with an Express shipment.

This property is read-only.

Data Type

String

CODLabelFile Property (FedExFreightShip Component)

The file the COD label should be written to.

Syntax

__property String CODLabelFile = { read=FCODLabelFile, write=FSetCODLabelFile };

Default Value

""

Remarks

The COD label will be written to the file specified. If no file is specified then the image will be stored in memory in CODLabel.

Note that this will only be set if COD is used on the shipment level with an Express shipment.

Data Type

String

CODTotalAmount Property (FedExFreightShip Component)

The total amount to be collected on delivery.

Syntax

__property String CODTotalAmount = { read=FCODTotalAmount, write=FSetCODTotalAmount };

Default Value

""

Remarks

This indicates customer's total COD amount (prior to any accumulations: total collection amount minus transportation charges). The CODTotalAmount is required to be provided in a ship request only if the corresponding flag of COD is contained in the ShipmentSpecialServices property.

For Ground COD shipments, the COD amount must be included on each package that uses COD service by setting the PackageCODAmount and the corresponding flag of COD is contained in the PackageSpecialServices field.

Format: Two explicit decimals (e.g.5.00).

Data Type

String

CODTrackingNumber Property (FedExFreightShip Component)

Contains the tracking number for the COD return shipment.

Syntax

__property String CODTrackingNumber = { read=FCODTrackingNumber };

Default Value

""

Remarks

When shipping COD via any of the domestic FedEx Express services, this is returned in the server response. This value can then be used to track the COD return package.

This property is read-only.

Data Type

String

CODType Property (FedExFreightShip Component)

COD type.

Syntax

__property TibxFedExFreightShipCODTypes CODType = { read=FCODType, write=FSetCODType };

enum TibxFedExFreightShipCODTypes {
  codtAny=0,
  codtCash=1,
  codtGuaranteedFunds=2,
  codtCompanyCheck=3,
  codtPersonalCheck=4
};

Default Value

codtAny

Remarks

This property identifies the type of funds FedEx should collect upon package delivery. It is required to be provided in a ship request only if the COD is present (requested) in the ShipmentSpecialServices.

Possible values are as follows:

Data Type

Integer

CommercialInvoiceComments Property (FedExFreightShip Component)

Commercial Invoice comments to be uploaded to customs.

Syntax

__property String CommercialInvoiceComments = { read=FCommercialInvoiceComments, write=FSetCommercialInvoiceComments };

Default Value

""

Remarks

Commercial Invoice comments to be uploaded to customs. This can be any extra information about the current shipment and is optional.

Data Type

String

CommercialInvoiceFreightCharge Property (FedExFreightShip Component)

Cost to transport the shipment.

Syntax

__property String CommercialInvoiceFreightCharge = { read=FCommercialInvoiceFreightCharge, write=FSetCommercialInvoiceFreightCharge };

Default Value

"0.00"

Remarks

Cost to transport the shipment. This is required if CommercialInvoiceTerms is set to Cfr, Cpt, Cif, or Cip. This charge will be added to the total customs value amount.

Format: Two explicit decimal positions.

Data Type

String

CommercialInvoiceInsurance Property (FedExFreightShip Component)

The amount the shipper or receiver pays to cover the cost of replacing the shipment if it is lost or damaged.

Syntax

__property String CommercialInvoiceInsurance = { read=FCommercialInvoiceInsurance, write=FSetCommercialInvoiceInsurance };

Default Value

"0.00"

Remarks

The amount the shipper or receiver pays to cover the cost of replacing the shipment if it is lost or damaged. This is required if CommercialInvoiceTerms is set to Cif or Cip.. This charge will be added to the total customs value amount.

Format: Two explicit decimal positions.

Data Type

String

CommercialInvoiceNumber Property (FedExFreightShip Component)

Customer's assigned invoice number.

Syntax

__property String CommercialInvoiceNumber = { read=FCommercialInvoiceNumber, write=FSetCommercialInvoiceNumber };

Default Value

""

Remarks

Customer's assigned invoice number. This is optional. If included in the request, this element prints on the shipping label and commercial invoice.

Data Type

String

CommercialInvoicePurpose Property (FedExFreightShip Component)

Reason to export the current international shipment Required for dutiable international express or ground shipment.

Syntax

__property TibxFedExFreightShipCommercialInvoicePurposes CommercialInvoicePurpose = { read=FCommercialInvoicePurpose, write=FSetCommercialInvoicePurpose };

enum TibxFedExFreightShipCommercialInvoicePurposes {
  cipSold=0,
  cipGift=1,
  cipNotSold=2,
  cipPersonalEffects=3,
  cipReturn=4,
  cipRepair=5,
  cipRepairAndReturn=6,
  cipSample=7,
  cipInterCompanyData=8
};

Default Value

cipSold

Remarks

Reason to export the current international shipment

Required for dutiable international express or ground shipment. This is not applicable to an international PIB (document) or a non-document which does not require a commercial invoice express shipment.

Valid values are:

Data Type

Integer

CommercialInvoiceTerms Property (FedExFreightShip Component)

Indicates the rights to the seller from the buyer.

Syntax

__property TibxFedExFreightShipCommercialInvoiceTerms CommercialInvoiceTerms = { read=FCommercialInvoiceTerms, write=FSetCommercialInvoiceTerms };

enum TibxFedExFreightShipCommercialInvoiceTerms {
  citFca=0,
  citFob=1,
  citFas=2,
  citCfr=3,
  citCif=4,
  citCip=5,
  citCpt=6,
  citDaf=7,
  citDdp=8,
  citDdu=9,
  citDeq=10,
  citDes=11,
  citExw=12
};

Default Value

citFca

Remarks

Indicates the rights to the seller from the buyer.

Required for dutiable international express or ground shipment. This is not applicable to an international PIB (document) or a non-document which does not require a commercial invoice express shipment.

Valid values are:

Data Type

Integer

CommodityCount Property (FedExFreightShip Component)

The number of records in the Commodity arrays.

Syntax

__property int CommodityCount = { read=FCommodityCount, write=FSetCommodityCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CommodityDescription
• CommodityFreightClass
• CommodityFreightPackagingType
• CommodityHandlingUnits
• CommodityHarmonizedCode
• CommodityHazardousMaterialsOptions
• CommodityHeight
• CommodityId
• CommodityLength
• CommodityManufacturer
• CommodityNmfcCode
• CommodityNumberOfPieces
• CommodityPartNumber
• CommodityPONumber
• CommodityQuantity
• CommodityQuantityUnit
• CommodityUnitPrice
• CommodityValue
• CommodityVolume
• CommodityWeight
• CommodityWidth

The array indices start at 0 and end at CommodityCount - 1.

This property is not available at design time.

Data Type

Integer

CommodityDescription Property (FedExFreightShip Component)

Complete and accurate description of this commodity line item.

Syntax

__property String CommodityDescription[int CommodityIdx] = { read=FCommodityDescription, write=FSetCommodityDescription };

Default Value

""

Remarks

Complete and accurate description of this commodity line item.

It is applicable to all international forms and freight shipments. Optional for Partial Invoice and required for the rest of form types.

Specific description of the type of equipment and its intended use is required. Clearance delays may result if the contents are not completely and accurately described. Vague description will not be accepted by Customs. Only a portion of this field will print on the label.

If the shipment contains documents only (i.e., Documents is set to True), then the CommodityDescription has to be set to an approved value. The following table lists document descriptions approved by U.S. Customs.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityFreightClass Property (FedExFreightShip Component)

Indicates the freight class of the commodity.

Syntax

__property TibxFedExFreightShipCommodityFreightClass CommodityFreightClass[int CommodityIdx] = { read=FCommodityFreightClass, write=FSetCommodityFreightClass };

enum TibxFedExFreightShipCommodityFreightClass {
  fc50=0,
  fc55=1,
  fc60=2,
  fc65=3,
  fc70=4,
  fc77_5=5,
  fc85=6,
  fc92_5=7,
  fc100=8,
  fc110=9,
  fc125=10,
  fc150=11,
  fc175=12,
  fc200=13,
  fc250=14,
  fc300=15,
  fc400=16,
  fc500=17
};

Default Value

fc50

Remarks

Indicates the freight class of the commodity.

The following table lists freight classes available from FedEx freight services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityFreightPackagingType Property (FedExFreightShip Component)

Identifies the Commodity item's packaging type.

Syntax

__property TibxFedExFreightShipCommodityFreightPackagingTypes CommodityFreightPackagingType[int CommodityIdx] = { read=FCommodityFreightPackagingType, write=FSetCommodityFreightPackagingType };

enum TibxFedExFreightShipCommodityFreightPackagingTypes {
  fcptNone=0,
  fcptBag=1,
  fcptBarrel=2,
  fcptBasket=3,
  fcptBox=4,
  fcptBucket=5,
  fcptBundle=6,
  fcptCage=7,
  fcptCarton=8,
  fcptCase=9,
  fcptChest=10,
  fcptContainer=11,
  fcptCrate=12,
  fcptCylinder=13,
  fcptDrum=14,
  fcptEnvelope=15,
  fcptHamper=16,
  fcptOther=17,
  fcptPackage=18,
  fcptPail=19,
  fcptPallet=20,
  fcptParcel=21,
  fcptPiece=22,
  fcptReel=23,
  fcptRoll=24,
  fcptSack=25,
  fcptShrinkwrapped=26,
  fcptSkid=27,
  fcptTank=28,
  fcptTotebin=29,
  fcptTube=30,
  fcptUnit=31
};

Default Value

fcptNone

Remarks

Identifies the Commodity item's packaging type. Possible values are:

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityHandlingUnits Property (FedExFreightShip Component)

Number of individual handling units to which this commodity applies.

Syntax

__property int CommodityHandlingUnits[int CommodityIdx] = { read=FCommodityHandlingUnits, write=FSetCommodityHandlingUnits };

Default Value

1

Remarks

Number of individual handling units to which this commodity applies. (NOTE: Total of commodity-level handling units may not balance to shipment-level total handling units.)

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityHarmonizedCode Property (FedExFreightShip Component)

Unique code representing this commodity line item (for imports only).

Syntax

__property String CommodityHarmonizedCode[int CommodityIdx] = { read=FCommodityHarmonizedCode, write=FSetCommodityHarmonizedCode };

Default Value

""

Remarks

Unique code representing this commodity line item (for imports only).

The World Trade Organization has classified all commodities with a number. This number is called a Harmonized Schedule code and ranges from six to 12 digits depending on the country. However, the first six digits of this number are more or less uniform throughout the world. Customs uses the HS number to determine the import duties, taxes and import license requirements for goods entering a country. This number is required for filling in the Customs documentation.

It is applicable to Invoice, Partial Invoice and NAFTA CO. Required for NAFTA CO and optional for Partial Invoice. For NAFTA CO: For each good described in CommodityDescription, identify the Harmonized Schedule (HS) tariff classification using the one of the country into whose territory the good is imported. This number must appear on import documentation that accompanies a shipment.

If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityHarmonizedCode is required for each commodity line item for shipments to EU countries.

At least one occurrence is required for U.S. Export shipments if the TotalCustomsValue is greater than 2,500 USD or if a valid U.S. Export license is required.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityHazardousMaterialsOptions Property (FedExFreightShip Component)

Indicates the kind of hazardous material content in this commodity.

Syntax

__property int CommodityHazardousMaterialsOptions[int CommodityIdx] = { read=FCommodityHazardousMaterialsOptions, write=FSetCommodityHazardousMaterialsOptions };

Default Value

0

Remarks

Indicates the kind of hazardous material content in this commodity.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to include multiple options:

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityHeight Property (FedExFreightShip Component)

The height of the commodity.

Syntax

__property int CommodityHeight[int CommodityIdx] = { read=FCommodityHeight, write=FSetCommodityHeight };

Default Value

1

Remarks

The height of the commodity.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityId Property (FedExFreightShip Component)

A unique identifier assigned to this line item.

Syntax

__property String CommodityId[int CommodityIdx] = { read=FCommodityId, write=FSetCommodityId };

Default Value

""

Remarks

A unique identifier assigned to this line item.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityLength Property (FedExFreightShip Component)

The width of the commodity.

Syntax

__property int CommodityLength[int CommodityIdx] = { read=FCommodityLength, write=FSetCommodityLength };

Default Value

1

Remarks

The width of the commodity.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityManufacturer Property (FedExFreightShip Component)

Country code where the contents of this commodity line were produced, manufactured or grown in their final form.

Syntax

__property String CommodityManufacturer[int CommodityIdx] = { read=FCommodityManufacturer, write=FSetCommodityManufacturer };

Default Value

"US"

Remarks

Country code where the contents of this commodity line were produced, manufactured or grown in their final form. In international shipment requests, the CommodityManufacturer is required to be entered.

In FedEx, when the shipment contains documents only (i.e., Documents is set to True), this represent the country where the documents were compiled and/or produced in their final form. In this case, only the CommodityManufacturer and CommodityDescription are required to be provided in the request. If the CommodityManufacturer is not provided, it defaults to US.

When the shipment contains non-documents items (i.e., Documents is set to False and the shipment is considered dutiable), at least one occurrence of a commodity item is required to be entered. The CommodityManufacturer has to be provided for each commodity item included in that international shipment.

In UPS, this applies to Invoice, Partial Invoice, CO and NAFTA CO. It is required for Invoice and CO forms, and optional for Partial Invoice.

Here is a list of country names and their codes where UPS services are available. Code is the value that has to be provided in all requests sent to UPS where country code is to be entered. This is also echoed in server reply.

Along with country names and their codes, we have also listed here the currency code used in that country, the maximum weight applicable to that country, whether address validation is supported and if postal code is required.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityNmfcCode Property (FedExFreightShip Component)

NMFC Code for commodity.

Syntax

__property String CommodityNmfcCode[int CommodityIdx] = { read=FCommodityNmfcCode, write=FSetCommodityNmfcCode };

Default Value

""

Remarks

NMFC Code for commodity.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityNumberOfPieces Property (FedExFreightShip Component)

The total number of packages, cartons, or containers for the commodity line item.

Syntax

__property int CommodityNumberOfPieces[int CommodityIdx] = { read=FCommodityNumberOfPieces, write=FSetCommodityNumberOfPieces };

Default Value

1

Remarks

The total number of packages, cartons, or containers for the commodity line item.

If the Documents is set to False in ship request, the CommodityNumberOfPieces is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityPartNumber Property (FedExFreightShip Component)

The part number of this commodity line item.

Syntax

__property String CommodityPartNumber[int CommodityIdx] = { read=FCommodityPartNumber, write=FSetCommodityPartNumber };

Default Value

""

Remarks

The part number of this commodity line item.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityPONumber Property (FedExFreightShip Component)

The PO Number for printed reference per commodity.

Syntax

__property String CommodityPONumber[int CommodityIdx] = { read=FCommodityPONumber, write=FSetCommodityPONumber };

Default Value

""

Remarks

The PO Number for printed reference per commodity.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityQuantity Property (FedExFreightShip Component)

Number of units contained in this commodity line item measured in units specified by the QuantityUnit .

Syntax

__property int CommodityQuantity[int CommodityIdx] = { read=FCommodityQuantity, write=FSetCommodityQuantity };

Default Value

1

Remarks

Number of units contained in this commodity line item measured in units specified by the CommodityQuantityUnit. This is used in conjunction with the CommodityQuantityUnit and CommodityUnitPrice.

If the Documents is set to False in ship request, the CommodityQuantity is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CommodityQuantityUnit Property (FedExFreightShip Component)

Unit of measure used to express the Quantity of this commodity line item.

Syntax

__property String CommodityQuantityUnit[int CommodityIdx] = { read=FCommodityQuantityUnit, write=FSetCommodityQuantityUnit };

Default Value

"EA"

Remarks

Unit of measure used to express the CommodityQuantity of this commodity line item.

If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityQuantityUnit is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

Here is a list of possible values for FedEx:

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityUnitPrice Property (FedExFreightShip Component)

Value of each QuantityUnit in Quantity of this commodity line item.

Syntax

__property String CommodityUnitPrice[int CommodityIdx] = { read=FCommodityUnitPrice, write=FSetCommodityUnitPrice };

Default Value

"1.00"

Remarks

Value of each CommodityQuantityUnit in CommodityQuantity of this commodity line item. This is used in conjunction with the CommodityQuantityUnit and CommodityQuantity. This indicates the monetary amount used to specify the worth or price of the commodity and it should be greater than zero.

When the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityUnitPrice is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

Format: Limit to 6 digits after the decimal (e.g. 900.000000).

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityValue Property (FedExFreightShip Component)

The value of an individual item being shipped.

Syntax

__property String CommodityValue[int CommodityIdx] = { read=FCommodityValue, write=FSetCommodityValue };

Default Value

""

Remarks

The value of an individual item being shipped. This should be provided for each item contained in the package being shipped. This property provides the value of the set of items. If the item is 2 boxes of 50 pens and the value of each box is $10.00, "20.00" (2 boxes x $10.00) should be entered. If the value of each pen is .25, then "25.00" (100 pens x .25) should be entered.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityVolume Property (FedExFreightShip Component)

This should contain the volume of the freight item.

Syntax

__property String CommodityVolume[int CommodityIdx] = { read=FCommodityVolume, write=FSetCommodityVolume };

Default Value

"0.0"

Remarks

This should contain the volume of the freight item. This should be specified in cubic feet if SizeUnit is set to IN and cubic meters if SizeUnit is set to CM.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityWeight Property (FedExFreightShip Component)

The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code.

Syntax

__property String CommodityWeight[int CommodityIdx] = { read=FCommodityWeight, write=FSetCommodityWeight };

Default Value

"0.00"

Remarks

The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code. This weight does not include carrier equipment.

If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the CommodityWeight is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

String

CommodityWidth Property (FedExFreightShip Component)

The width of the commodity.

Syntax

__property int CommodityWidth[int CommodityIdx] = { read=FCommodityWidth, write=FSetCommodityWidth };

Default Value

1

Remarks

The width of the commodity.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The CommodityIdx parameter specifies the index of the item in the array. The size of the array is controlled by the CommodityCount property.

This property is not available at design time.

Data Type

Integer

CompanyCloseTime Property (FedExFreightShip Component)

The time your company closes.

Syntax

__property String CompanyCloseTime = { read=FCompanyCloseTime, write=FSetCompanyCloseTime };

Default Value

""

Remarks

This property is required for PickupAvailability and SchedulePickup requests. The ShipTime can be used to set the ready time stamp for the pickup. The ShipTime and the CompanyCloseTime must allow a long enough time period for the pickup to occur.

Data Type

String

DeliveryDate Property (FedExFreightShip Component)

Date on which shipment is expected to be delivered.

Syntax

__property String DeliveryDate = { read=FDeliveryDate };

Default Value

""

Remarks

When either the GetPackageLabel or the GetShipmentLabels method is called, the DeliveryDate will be returned in the server reply. For international shipments, this information is limited to a number of international countries.

This property is read-only.

Data Type

String

DutiesPayorAccountNumber Property (FedExFreightShip Component)

The account number of the party responsible for payment (shipping charges, or duties and taxes).

Syntax

__property String DutiesPayorAccountNumber = { read=FDutiesPayorAccountNumber, write=FSetDutiesPayorAccountNumber };

Default Value

""

Remarks

The account number of the party responsible for payment (shipping charges, or duties and taxes).

This is required to be provided in the ship request, only if DutiesPayorPayorType is set to 'RECIPIENT' or 'THIRDPARTY'. Otherwise, it defaults to DutiesPayorAccountNumber.

Data Type

String

DutiesPayorCountryCode Property (FedExFreightShip Component)

The country code for the payor of the shipment, or duties and taxes.

Syntax

__property String DutiesPayorCountryCode = { read=FDutiesPayorCountryCode, write=FSetDutiesPayorCountryCode };

Default Value

"US"

Remarks

The country code for the payor of the shipment, or duties and taxes.

When shipping via FedEx Express, the DutiesPayorCountryCode is required to be provided in the ship request only if DutiesPayorPayorType is set to 'RECIPIENT' or 'THIRDPARTY'. For FedEx Ground shipments, the DutiesPayorCountryCode is required only if DutiesPayorPayorType is set to 'THIRDPARTY'.

For UPS, this should be the same as it was entered in the UPS system when this account was set up. In domestic shipments, it will always default to US.

Data Type

String

DutiesPayorType Property (FedExFreightShip Component)

Method of payment for shipment, or duties and taxes.

Syntax

__property TibxFedExFreightShipDutiesPayorTypes DutiesPayorType = { read=FDutiesPayorType, write=FSetDutiesPayorType };

enum TibxFedExFreightShipDutiesPayorTypes {
  ptSender=0,
  ptRecipient=1,
  ptThirdParty=2,
  ptCollect=3,
  ptConsignee=4
};

Default Value

ptSender

Remarks

Method of payment for shipment, or duties and taxes. This is required to be provided in a ship request. Valid payment types are:

The COLLECT payment type is only supported in FedEx Ground services. The CONSIGNEE type is only supported in UPS service.

For FedEx, when this property is set to a value other than 0 (ptSender), the DutiesPayorAccountNumber and DutiesPayorCountryCode are required to be provided in the request as well. Otherwise, those will default to FedExAccountNumber and SenderCountryCode.

For UPS, when set to ptSender, the DutiesPayorAccountNumber is automatically set to UPSAccountNumber. When ptRecipient is specified, DutiesPayorAccountNumber and DutiesPayorZipCode are required to be provided in the request. For return international shipments, this option is invalid for transportation charges. And, when ptThirdParty has been specified, the DutiesPayorAccountNumber, DutiesPayorZipCode and DutiesPayorCountryCode are required to be provided in the request. When ptConsignee is specified, it indicates that UPS Consignee Billing option is selected, no other fields need to be set. ptConsignee only applies to US/PR and PR/US shipment origins and destination.

Data Type

Integer

FedExAccountNumber Property (FedExFreightShip Component)

The account number associated with the shipment.

Syntax

__property String FedExAccountNumber = { read=FFedExAccountNumber, write=FSetFedExAccountNumber };

Default Value

""

Remarks

The account number associated with the shipment.

The FedExAccountNumber is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity.

Data Type

String

FedExAuthorizationToken Property (FedExFreightShip Component)

Authorization Token used to authenticate the request.

Syntax

__property String FedExAuthorizationToken = { read=FFedExAuthorizationToken, write=FSetFedExAuthorizationToken };

Default Value

""

Remarks

Authorization Token used to authenticate the request.

This field should be set to the value of a bearer token obtained through OAuth 2.0. For more information on getting a bearer token, see the documentation for the OAuth component.

Data Type

String

FedExLanguageCode Property (FedExFreightShip Component)

Two-letter code for the language (e.

Syntax

__property String FedExLanguageCode = { read=FFedExLanguageCode, write=FSetFedExLanguageCode };

Default Value

"en"

Remarks

Two-letter code for the language (e.g. en, fr, etc.).

This field allows you to assign the language code. Default value is en.

Data Type

String

FedExLocaleCode Property (FedExFreightShip Component)

Two-letter code for the region (e.

Syntax

__property String FedExLocaleCode = { read=FFedExLocaleCode, write=FSetFedExLocaleCode };

Default Value

"US"

Remarks

Two-letter code for the region (e.g. US, CA, etc.).

Some languages require a locale code to further identify the language. Default value is US.

Data Type

String

FedExServer Property (FedExFreightShip Component)

URL for the FedEx Server where the requests are sent.

Syntax

__property String FedExServer = { read=FFedExServer, write=FSetFedExServer };

Default Value

""

Remarks

URL for the FedEx Server where the requests are sent. This will overwrite the internal values that the component uses.

Normally, you do not need to set this property. By default, the component will send the request to the preset production end-point. In order to send request to the test environment, you must set the TESTMODE config to true like: component.Config("TESTMODE=true").

Data Type

String

FirewallAutoDetect Property (FedExFreightShip Component)

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (FedExFreightShip Component)

This property determines the type of firewall to connect through.

Syntax

__property TibxFedExFreightShipFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TibxFedExFreightShipFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (FedExFreightShip Component)

This property contains the name or IP address of firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (FedExFreightShip Component)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (FedExFreightShip Component)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (FedExFreightShip Component)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

FreightGuaranteeDate Property (FedExFreightShip Component)

The date the freight shipment is guaranteed for.

Syntax

__property String FreightGuaranteeDate = { read=FFreightGuaranteeDate, write=FSetFreightGuaranteeDate };

Default Value

""

Remarks

The date the freight shipment is guaranteed for.

The valid format for the date is YYYY-MM-DD

Data Type

String

FreightGuaranteeType Property (FedExFreightShip Component)

Specifies what type of freight guarantee is requested.

Syntax

__property TibxFedExFreightShipFreightGuaranteeTypes FreightGuaranteeType = { read=FFreightGuaranteeType, write=FSetFreightGuaranteeType };

enum TibxFedExFreightShipFreightGuaranteeTypes {
  fgtGuaranteedDate=0,
  fgtGuaranteedMorning=1
};

Default Value

fgtGuaranteedDate

Remarks

Specifies what type of freight guarantee is requested.

The valid values are:

Data Type

Integer

HoldAtLocationAddress1 Property (FedExFreightShip Component)

Street name.

Syntax

__property String HoldAtLocationAddress1 = { read=FHoldAtLocationAddress1, write=FSetHoldAtLocationAddress1 };

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS HoldAtLocationAddress1 should not exceed 35 characters.

Data Type

String

HoldAtLocationAddress2 Property (FedExFreightShip Component)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

__property String HoldAtLocationAddress2 = { read=FHoldAtLocationAddress2, write=FSetHoldAtLocationAddress2 };

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS HoldAtLocationAddress2 should not exceed 35 characters.

Data Type

String

HoldAtLocationCity Property (FedExFreightShip Component)

Name of city, town, etc.

Syntax

__property String HoldAtLocationCity = { read=FHoldAtLocationCity, write=FSetHoldAtLocationCity };

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

HoldAtLocationCountryCode Property (FedExFreightShip Component)

Country code.

Syntax

__property String HoldAtLocationCountryCode = { read=FHoldAtLocationCountryCode, write=FSetHoldAtLocationCountryCode };

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

HoldAtLocationState Property (FedExFreightShip Component)

State or province code.

Syntax

__property String HoldAtLocationState = { read=FHoldAtLocationState, write=FSetHoldAtLocationState };

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

HoldAtLocationZipCode Property (FedExFreightShip Component)

Postal code.

Syntax

__property String HoldAtLocationZipCode = { read=FHoldAtLocationZipCode, write=FSetHoldAtLocationZipCode };

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both HoldAtLocationCity and HoldAtLocationState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

HoldAtLocationContactCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String HoldAtLocationContactCompany = { read=FHoldAtLocationContactCompany, write=FSetHoldAtLocationContactCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either HoldAtLocationContactFirstName and HoldAtLocationContactLastName or HoldAtLocationContactCompany are required to be provided.

Data Type

String

HoldAtLocationContactEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String HoldAtLocationContactEmail = { read=FHoldAtLocationContactEmail, write=FSetHoldAtLocationContactEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

HoldAtLocationContactFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String HoldAtLocationContactFax = { read=FHoldAtLocationContactFax, write=FSetHoldAtLocationContactFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

HoldAtLocationContactFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String HoldAtLocationContactFirstName = { read=FHoldAtLocationContactFirstName, write=FSetHoldAtLocationContactFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either HoldAtLocationContactFirstName and HoldAtLocationContactLastName or HoldAtLocationContactCompany must be sent.

Data Type

String

HoldAtLocationContactLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String HoldAtLocationContactLastName = { read=FHoldAtLocationContactLastName, write=FSetHoldAtLocationContactLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either HoldAtLocationContactFirstName and HoldAtLocationContactLastName or HoldAtLocationContactCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

HoldAtLocationContactMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String HoldAtLocationContactMiddleInitial = { read=FHoldAtLocationContactMiddleInitial, write=FSetHoldAtLocationContactMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

HoldAtLocationContactPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String HoldAtLocationContactPhone = { read=FHoldAtLocationContactPhone, write=FSetHoldAtLocationContactPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

HoldAtLocationPhone Property (FedExFreightShip Component)

Phone number of the FedEx location where the shipment will be hold at.

Syntax

__property String HoldAtLocationPhone = { read=FHoldAtLocationPhone, write=FSetHoldAtLocationPhone };

Default Value

""

Remarks

When your Hold at Location shipment is received at the designated FedEx station, you will be notified that your shipment is ready to be picked up. It is required to be provided in a HoldAtLocation request.

Data Type

String

InsuredValue Property (FedExFreightShip Component)

Total insured amount.

Syntax

__property String InsuredValue = { read=FInsuredValue, write=FSetInsuredValue };

Default Value

"0.00"

Remarks

This element is optional. This is just insurance on the whole shipment if it is lost or stolen. If not provided in the request, FedEx will assume the 0 USD value. The value has 2 explicit decimal position and has a maximum of 11 characters including the decimal.

When shipping internationally, this cannot exceed the TotalCustomsValue

Data Type

String

IntlExportControlledExportType Property (FedExFreightShip Component)

The controlled export type.

Syntax

__property TibxFedExFreightShipIntlExportControlledExportTypes IntlExportControlledExportType = { read=FIntlExportControlledExportType, write=FSetIntlExportControlledExportType };

enum TibxFedExFreightShipIntlExportControlledExportTypes {
  cetDEA036=0,
  cetDEA236=1,
  cetDEA486=2,
  cetDSP05=3,
  cetDSP61=4,
  cetDSP73=5,
  cetDSP85=6,
  cetDSP94=7,
  cetDSPLicenceAgreement=8,
  cetFromForeignTradeZone=9,
  cetWarehouseWithdrawal=10
};

Default Value

cetDEA036

Remarks

This specifies the type of permit to be used for shipments that are controlled by the US State Department or the US Drug Enforcement Agency.

This only applies when the ServiceType is stFedExInternationalPriority or stFedExInternationalPriorityFreight.

Note this only applies when shipping internationally.

Data Type

Integer

IntlExportEntryNumber Property (FedExFreightShip Component)

The entry number for the controlled export.

Syntax

__property String IntlExportEntryNumber = { read=FIntlExportEntryNumber, write=FSetIntlExportEntryNumber };

Default Value

""

Remarks

This specifies the entry number for any shipments that are controlled by the US State Department or the US Drug Enforcement Agency.

This only applies when the ServiceType is stFedExInternationalPriority or stFedExInternationalPriorityFreight.

Note this only applies when shipping internationally.

Data Type

String

IntlExportForeignTradeZoneCode Property (FedExFreightShip Component)

The foreign trade zone code.

Syntax

__property String IntlExportForeignTradeZoneCode = { read=FIntlExportForeignTradeZoneCode, write=FSetIntlExportForeignTradeZoneCode };

Default Value

""

Remarks

This specifies the trade zone for shipments that are controlled by the US State Department or the US Drug Enforcement Agency.

This only applies when the ServiceType is stFedExInternationalPriority or stFedExInternationalPriorityFreight.

Note this only applies when shipping internationally.

Data Type

String

IntlExportLicenseNumber Property (FedExFreightShip Component)

The license or permit number.

Syntax

__property String IntlExportLicenseNumber = { read=FIntlExportLicenseNumber, write=FSetIntlExportLicenseNumber };

Default Value

""

Remarks

This should be set to the license or permit number to be used when the International Controlled Export option (0x00010000L) or International Traffic in arms Regulations option (0x10000000000L) is selected in the ShipmentSpecialServices

Note this only applies when shipping internationally.

Data Type

String

IntlExportLicenseNumberExpiration Property (FedExFreightShip Component)

The license or permit number expiration date.

Syntax

__property String IntlExportLicenseNumberExpiration = { read=FIntlExportLicenseNumberExpiration, write=FSetIntlExportLicenseNumberExpiration };

Default Value

""

Remarks

This should be set to the expiration date for the license or permit to be used when the International Controlled Export option (0x00010000L) is selected in the ShipmentSpecialServices

Note this only applies when shipping internationally.

Data Type

String

LabelImageType Property (FedExFreightShip Component)

Type of image or printer commands the label is to be formatted in.

Syntax

__property TibxFedExFreightShipLabelImageTypes LabelImageType = { read=FLabelImageType, write=FSetLabelImageType };

enum TibxFedExFreightShipLabelImageTypes {
  fitPDF=0,
  fitPNG=1,
  fitEltron=2,
  fitZebra=3,
  fitUniMark=4
};

Default Value

fitPDF

Remarks

This element is required to indicate the format that the shipping label should be printed in. This must be set when either GetPackageLabel or GetShipmentLabels are called. The values for the thermal printers indicate the type of printer that is being used.

Valid image types and their meanings with the corresponding usage are listed below:

Note: To generate PDF labels, you will need Adobe Reader 6.0 or higher, and the printer driver configuration set to 'none' for print scaling.

There are two types of shipping labels supported:

• plain paper (to be used in laser printers only. In this case, possible values for the LabelImageType are PNG or PDF),
• thermal (to be used in thermal printers only. In this case, possible values for the LabelImageType are ELTRON, ZEBRA, or UNIMARK).

While the content of each of these labels is the same, using the correct image type for the work environment the application will be used in is essential.

You may use the LabelStockType config to specify the size of the label. By default, the component will request a 4x6 label.

Data Type

Integer

Location Property (FedExFreightShip Component)

The FedEx location identifier that received the express dispatch request.

Syntax

__property String Location = { read=FLocation, write=FSetLocation };

Default Value

""

Remarks

This property is returned after a call to SchedulePickup and contains the Id of the FedEx location that is scheduled to pick up the package.

When calling CancelPickup, this property must be supplied for the cancel request to be successful.

Data Type

String

MasterTrackingNumber Property (FedExFreightShip Component)

Tracking number assigned to the whole MPS shipment.

Syntax

__property String MasterTrackingNumber = { read=FMasterTrackingNumber };

Default Value

""

Remarks

This is applicable to MPS shipment requests only and identifies the whole shipment. In a MPS ship request, this property is returned in the server reply when either the GetPackageLabel or the GetShipmentLabels method is called.

This value is used as parameter when a cancel shipment request is sent (i.e., when the CancelShipment method is called). It can also be used when tracking a MPS.

This property is read-only.

Data Type

String

NotifyCount Property (FedExFreightShip Component)

The number of records in the Notify arrays.

Syntax

__property int NotifyCount = { read=FNotifyCount, write=FSetNotifyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• NotifyAggregate
• NotifyEmail
• NotifyFlags
• NotifyMessage
• NotifyName
• NotifyType

The array indices start at 0 and end at NotifyCount - 1.

This property is not available at design time.

Data Type

Integer

NotifyAggregate Property (FedExFreightShip Component)

This can be used to set the entire aggregate xml for the recipient to be notified.

Syntax

__property String NotifyAggregate[int NotifyIdx] = { read=FNotifyAggregate, write=FSetNotifyAggregate };

Default Value

""

Remarks

This can be used to set the entire aggregate xml for the recipient to be notified. This is only valid for ship requests only when the EmailNotification=0x00000004 is present in the ShipmentSpecialServices.

FedEx

For FedEx, this aggregate should contain descriptive data required for FedEx to provide e-mail notification to the customer regarding the shipment.

The format of this aggregate should be as follows: <EMailNotificationDetail> <PersonalMessage>personal_message</PersonalMessage> <Recipients> (this aggregate can be entered up to six times) <EMailNotificationRecipientType>recipient_type</EMailNotificationRecipientType> <EMailAddress>recipient_email</EMailAddress> <NotifyOnShipment>true_or_false</NotifyOnShipment> <NotifyOnException>true_or_false</NotifyOnException> <NotifyOnDelivery>true_or_false</NotifyOnDelivery> <Format>format_type</Format> <Localization> <LanguageCode>language_code</LanguageCode> </Localization> </Recipients> </EMailNotificationDetail>

In this aggregate, you can specify:

• a message text to be sent in the email notification (via the PersonalMessage element). This is optional.
• the type of the recipient: SHIPPER, RECIPIENT, BROKER, OTHER (via the EMailNotificationRecipientType element). This is optional.
• the recipient's email address (via the EMailAddress element). This is required.
• whether the recipient is to be notified on shipment, exception or delivery (via the NotifyOnShipment, NotifyOnException, NotifyOnDelivery elements). These are required.
• the format of the message: HTML, TEXT, WIRELESS (via the Format element). This is required.
• the language code you want the message to be sent to (via the LanguageCode element). This is optional. If not present, it will default to English (EN).

The specified shipment notification can be sent up to six (6) email addresses to receive (i.e., the Recipients field can have up to 6 recipient emails).

This setting is optional. If NotifyAggregate is not set it will be automatically created by the component.

UPS

For UPS, the following JSON format is valid: { "NotificationCode": "6", "EMail": { "EMailAddress": [ "recipient1_email", (up to five recipient emails) "recipient2_email" ], "UndeliverableEMailAddress": "undeliverable_email", "FromEMailAddress": "sender_email", "FromName": "sender_name", "Memo": "message" } }

In this aggregate, you can specify:

• a notification code which describes the notification requested: "6" (Ship Notification), "7" (Exception Notification), "8" (Delivery Notification), or "2" (Return Notification). This is required.
• the recipient's email address (via the EMailAddress element). This is required.
• the undeliverable email address if to specify where an undeliverable email should be sent. This is optional.
• the email address for the reply-to address. The From field of the email will contain pkginfo@ups.com. This should be specified by the FromEMailAddress element.
• an optional from name.
• a message text to be sent in the email notification (via the Memo element). This is optional.

Note that this property does not apply for USPS and CanadaPost.

The NotifyIdx parameter specifies the index of the item in the array. The size of the array is controlled by the NotifyCount property.

This property is not available at design time.

Data Type

String

NotifyEmail Property (FedExFreightShip Component)

Email address of the recipient to be notified.

Syntax

__property String NotifyEmail[int NotifyIdx] = { read=FNotifyEmail, write=FSetNotifyEmail };

Default Value

""

Remarks

Email address of the recipient to be notified. This is required to be provided for each recipient.

The NotifyIdx parameter specifies the index of the item in the array. The size of the array is controlled by the NotifyCount property.

This property is not available at design time.

Data Type

String

NotifyMessage Property (FedExFreightShip Component)

User defined text that will be included in the email to be sent to Email .

Syntax

__property String NotifyMessage[int NotifyIdx] = { read=FNotifyMessage, write=FSetNotifyMessage };

Default Value

""

Remarks

User defined text that will be included in the email to be sent to NotifyEmail. This is optional.

For FedEx, when multiple recipients exist, the message for the first recipient is the only message that will be included in the request. FedEx only allows one message for all of the recipients of the notification email.

This property is not used by USPS or Canada Post.

The NotifyIdx parameter specifies the index of the item in the array. The size of the array is controlled by the NotifyCount property.

This property is not available at design time.

Data Type

String

NotifyName Property (FedExFreightShip Component)

The name associated with the notification.

Syntax

__property String NotifyName[int NotifyIdx] = { read=FNotifyName, write=FSetNotifyName };

Default Value

""

Remarks

The name associated with the notification.

For USPS, this name will appear in the text of the Signature Confirmation e-mail message.

This property is not applicable to FedEx, UPS, or Canada Post.

The NotifyIdx parameter specifies the index of the item in the array. The size of the array is controlled by the NotifyCount property.

This property is not available at design time.

Data Type

String

NotifyFlags Property (FedExFreightShip Component)

Identifies the type of notification requested.

Syntax

__property int NotifyFlags[int NotifyIdx] = { read=FNotifyFlags, write=FSetNotifyFlags };

Default Value

0

Remarks

Identifies the type of notification requested. Valid values are:

For FedEx notifications, the following flags apply:

• On Shipment
• On Exception
• On Delivery
• On Tender
• On Estimated Delivery
• HTML
• Text

To use Estimated Delivery with FedEx, the APIVersion configuration setting must be set to 19 or higher.

For UPS notifications, the following flags apply:

• On Shipment
• On Exception
• On Delivery
• On Return
• In Transit
• ADL
• UAP

For CanadaPost notifications, only the On Shipment, On Exception, and On Delivery apply.

This field is not used by USPS.

The NotifyIdx parameter specifies the index of the item in the array. The size of the array is controlled by the NotifyCount property.

This property is not available at design time.

Data Type

Integer

NotifyType Property (FedExFreightShip Component)

Identifies the set of valid email notification recipient types.

Syntax

__property TibxFedExFreightShipNotifyTypes NotifyType[int NotifyIdx] = { read=FNotifyType, write=FSetNotifyType };

enum TibxFedExFreightShipNotifyTypes {
  rtUnspecified=0,
  rtRecipient=1,
  rtShipper=2,
  rtBroker=3,
  rtOther=4,
  rtThirdParty=5
};

Default Value

rtUnspecified

Remarks

Identifies the set of valid email notification recipient types. Valid values are:

For FedEx, when rtShipper, rtRecipient or rtBroker are set, the email address associated with their definitions will be used and the NotifyEmail specified for these types will be ignored.

For USPS, only the rtShipper and rtRecipient are valid.

This property does not apply to UPS or Canada Post notifications.

The NotifyIdx parameter specifies the index of the item in the array. The size of the array is controlled by the NotifyCount property.

This property is not available at design time.

Data Type

Integer

PackageLocation Property (FedExFreightShip Component)

The location of pickup.

Syntax

__property TibxFedExFreightShipPackageLocations PackageLocation = { read=FPackageLocation, write=FSetPackageLocation };

enum TibxFedExFreightShipPackageLocations {
  plNone=0,
  plFront=1,
  plSide=2,
  plRear=3
};

Default Value

plNone

Remarks

This property is optional when calling SchedulePickup. The allowed values to be selected are: None, Front, Side, or Rear.

Data Type

Integer

PackageCount Property (FedExFreightShip Component)

The number of records in the Package arrays.

Syntax

__property int PackageCount = { read=FPackageCount, write=FSetPackageCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• PackageBaseCharge
• PackageDangerousGoodsAccessible
• PackageDangerousGoodsOptions
• PackageDescription
• PackageHeight
• PackageId
• PackageInsuredValue
• PackageLength
• PackageNetCharge
• PackageReference
• PackageShippingLabel
• PackageShippingLabelFile
• PackageSignatureType
• PackageSpecialServices
• PackageTotalDiscount
• PackageTotalSurcharges
• PackageTrackingNumber
• PackageType
• PackageWeight
• PackageWidth

The array indices start at 0 and end at PackageCount - 1.

This property is not available at design time.

Data Type

Integer

PackageBaseCharge Property (FedExFreightShip Component)

Actual Base Charge applicable to this package.

Syntax

__property String PackageBaseCharge[int PackageIdx] = { read=FPackageBaseCharge };

Default Value

""

Remarks

Actual Base Charge applicable to this package.

For FedEx, this is normally specific to the PayorAccountNumber. It is used in the FedExShip and FedExShipIntl only. When this is used, please note that for MPS the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on the package level. In this case, the properties that store the rating information: PackageBaseCharge, PackageNetCharge, PackageTotalSurcharges, and PackageTotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in the last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

For UPS, this is the "transportation charge - fuel surcharge" applicable to this package. Upon a successful response, this is returned in the server reply for each package included in the shipment if SubVersion is 1701 or greater.

This is not applicable to USPS.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is read-only and not available at design time.

Data Type

String

PackageDangerousGoodsAccessible Property (FedExFreightShip Component)

Identifies whether or not the dangerous goods being shipped are required to be accessible during delivery.

Syntax

__property bool PackageDangerousGoodsAccessible[int PackageIdx] = { read=FPackageDangerousGoodsAccessible, write=FSetPackageDangerousGoodsAccessible };

Default Value

False

Remarks

Identifies whether or not the dangerous goods being shipped are required to be accessible during delivery.

This property is only applicable to FedEx shipments, and is required to be specified when the PackageSpecialServices contains the corresponding flag for Dangerous Goods.

There are two types of dangerous goods:

• Accessible, which may be shipped using: FedEx Priority Overnight, FedEx 1Day Freight, FedEx International Priority, FedEx International Priority Freight. The PackageDangerousGoodsAccessible should be set to True.
• Inaccessible, which may be shipped using: FedEx Priority Overnight, FedEx Standard Overnight, FedEx 2Day, FedEx Express Saver, FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx International Priority, FedEx International Priority Freight. The PackageDangerousGoodsAccessible should be set to False.

The accessibility type affects the service availability and rates.

Note: To locate FedEx services that allow dangerous goods shipping for your origin/destination pair, use the FedExRates component by requesting rates for all available services.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Boolean

PackageDangerousGoodsOptions Property (FedExFreightShip Component)

Contains the collection of options will be used on the package level when using dangerous goods.

Syntax

__property int PackageDangerousGoodsOptions[int PackageIdx] = { read=FPackageDangerousGoodsOptions, write=FSetPackageDangerousGoodsOptions };

Default Value

0

Remarks

Contains the collection of options will be used on the package level when using dangerous goods. Valid values are:

Note: This is only valid when using FedEx.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageDescription Property (FedExFreightShip Component)

For FedEx, this is the description that appears in the email to identify this package.

Syntax

__property String PackageDescription[int PackageIdx] = { read=FPackageDescription, write=FSetPackageDescription };

Default Value

""

Remarks

For FedEx, this is the description that appears in the email to identify this package. This is optional.

For UPS, this is applicable and required for shipments with return service only.

This does not apply for USPS and Canada Post.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageHeight Property (FedExFreightShip Component)

The height of the package to be shipped.

Syntax

__property int PackageHeight[int PackageIdx] = { read=FPackageHeight, write=FSetPackageHeight };

Default Value

0

Remarks

The height of the package to be shipped.

For FedEx, the PackageHeight is optional, but recommended, if "Your Packaging" is used as PackagePackagingType. This is required if PackageLength and PackageWidth are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When PackageWidth is provided in the request, then all other dimensions (PackageLength and PackageHeight) are to be set as well.

For USPS, this only applies to GetRates and is only required if the package is irregular and the PackagePackagingType property is set to ptNonRectangular. (In this case PackageWidth and PackageHeight must still be set). For parcels, PackageLength is the measurement of the longest dimension and PackageWidth and PackageHeight make up the other two dimensions. PackageGirth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the PackageLength, PackageWidth, and PackageHeight are required for Priority Mail packages when the PackageSize is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the Shortest dimension (3.1 digits e.g. 999.9 pattern).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageId Property (FedExFreightShip Component)

An 8-digit Unique Parcel Identification Number.

Syntax

__property String PackageId[int PackageIdx] = { read=FPackageId, write=FSetPackageId };

Default Value

""

Remarks

An 8-digit Unique Parcel Identification Number.

Unique number used to identify the package. This property is optional, and only applies to USPS return labels.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageInsuredValue Property (FedExFreightShip Component)

Amount of insurance requested for this package.

Syntax

__property String PackageInsuredValue[int PackageIdx] = { read=FPackageInsuredValue, write=FSetPackageInsuredValue };

Default Value

""

Remarks

Amount of insurance requested for this package. The value has 2 explicit decimal position and has a maximum of 11 characters including the decimal.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageLength Property (FedExFreightShip Component)

The length of the package to be shipped.

Syntax

__property int PackageLength[int PackageIdx] = { read=FPackageLength, write=FSetPackageLength };

Default Value

0

Remarks

The length of the package to be shipped.

For FedEx, the PackageLength is optional, but recommended, if "Your Packaging" is used as PackagePackagingType. This is required if PackageWidth and PackageHeight are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments. Length must be the longest dimension of the container.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When PackageWidth is provided in the request, then all other dimensions (PackageLength and PackageHeight) are to be set as well.

Valid values are 0 to 108 IN and 0 to 270 CM.

For USPS, this is only required if the package is irregular and the PackagePackagingType property is set to ptNonRectangular. (In this case PackageWidth and PackageHeight must still be set).

Note: For parcels, the PackageLength is the measurement of the longest dimension and PackageWidth and PackageHeight make up the other two dimensions. PackageGirth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the PackageLength, PackageWidth, and PackageHeight are required for Priority Mail packages when the PackageSize is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the longest dimension (3.1 digits e.g. 999.9 pattern).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageNetCharge Property (FedExFreightShip Component)

Actual Net Charge applicable to this package.

Syntax

__property String PackageNetCharge[int PackageIdx] = { read=FPackageNetCharge, write=FSetPackageNetCharge };

Default Value

""

Remarks

Actual Net Charge applicable to this package.

For FedEx, this is normally specific to the PayorAccountNumber. It is used in the FedExShip and FedExShipIntl components only.

When this is used, please note that for MPS the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the properties that store the rating information: PackageBaseCharge, PackageNetCharge, PackageTotalSurcharges, and PackageTotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

For UPS, upon a successful response to GetRates, this is returned in the server reply for each package included in the shipment.

For USPS, this specifies the postage required for mailing a package of the indicated size and weight. If this property is not supplied, it will be calculated and returned in the response.

This will also be set when an Endicia label is returned describing how much postage was charged from the Endicia account for the package.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageType Property (FedExFreightShip Component)

The packaging type of the package being rated and/or shipped.

Syntax

__property TibxFedExFreightShipPackageTypes PackageType[int PackageIdx] = { read=FPackageType, write=FSetPackageType };

enum TibxFedExFreightShipPackageTypes {
  ptNone=0,
  ptPostcards=1,
  ptLetter=2,
  ptLargeEnvelope=3,
  ptFlatRateEnvelope=4,
  ptFlatRateLegalEnvelope=5,
  ptFlatRatePaddedEnvelope=6,
  ptFlatRateGiftCardEnvelope=7,
  ptFlatRateWindowEnvelope=8,
  ptFlatRateCardboardEnvelope=9,
  ptSmallFlatRateEnvelope=10,
  ptPak=11,
  ptBox=12,
  pt10kgBox=13,
  pt25kgBox=14,
  ptSmallExpressBox=15,
  ptMediumExpressBox=16,
  ptLargeExpressBox=17,
  ptFlatRateBox=18,
  ptSmallFlatRateBox=19,
  ptMediumFlatRateBox=20,
  ptLargeFlatRateBox=21,
  ptDVDFlatRateBox=22,
  ptLargeVideoFlatRateBox=23,
  ptRegionalRateBoxA=24,
  ptRegionalRateBoxB=25,
  ptRectangular=26,
  ptNonRectangular=27,
  ptTube=28,
  ptMatterForTheBlind=29,
  ptPallet=30,
  ptYourPackaging=31,
  ptDocument=32,
  ptFlats=33,
  ptParcels=34,
  ptBPM=35,
  ptFirstClass=36,
  ptPriority=37,
  ptMachinables=38,
  ptIrregulars=39,
  ptParcelPost=40,
  ptBPMParcel=41,
  ptMediaMail=42,
  ptBPMFlat=43,
  ptStandardFlat=44,
  ptRegionalRateBoxC=45,
  ptThickEnvelope=46,
  ptSmallBox=47,
  ptMediumBox=48,
  ptLargeBox=49,
  ptExtraLargeBox=50,
  ptPackageService=51,
  ptCubicParcels=52,
  ptCubicSoftPack=53
};

Default Value

ptNone

Remarks

The packaging type of the package being rated and/or shipped.

Possible values are:

If this is set to a value that is not applicable to a certain provider, it will automatically be set to ptNone (0).

For FedEx, this is required in a ship request when either the GetPackageLabel or GetShipmentLabels method is called. FedEx only supports one packaging type for the whole shipment, so only the PackagePackagingType for the first package is used in label requests.

If the PackagePackagingType is set to 31 (Your Packaging), then the dimensions of the package should be provided in the request by setting the following: PackageLength, PackageWidth, and PackageHeight.

If the ServiceType is set to any of the FedEx Ground services (Ground or Ground Home Delivery), then the PackagePackagingType will be automatically set to 31 (Your Packaging).

Please note that the types pt10kgBox (13) and pt25kgBox (14) are only meant for international shipments and domestic shipments outside of the United States.

For UPS, please note that when selecting PackagePackagingType make sure this is valid for all the following: SenderCountryCode, RecipientCountryCode, ServiceType, and all special services requested at both shipment and package level.

Also the following restrictions apply when using UPS Mail Innovations:

For USPS, this is used for getting rates and Endicia labels. For international shipments, the only valid values are: ptRectangular and ptNonRectangular.

For Canada Post, ptLetter (2) is only applicable if theContractId is set.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageReference Property (FedExFreightShip Component)

Indicates the package reference type and value, that associates this package (assigned by the customer).

Syntax

__property String PackageReference[int PackageIdx] = { read=FPackageReference, write=FSetPackageReference };

Default Value

""

Remarks

Indicates the package reference type and value, that associates this package (assigned by the customer).

For FedEx, this is optional to be provided in a ship request. You can enter up to 3 customer references by providing: the type(s) and value(s) in the request.

Valid values for types are:

The type and value pair(s) should be entered as a string in this format: type1:value1; type2:value2; type3:value3;. For example, if the user wants to assign 3 references to this package, the PackageReference should be set to: CN:123456; IN:123; SN:12;.

Reference information may also be used to track packages by reference.

For UPS, this is also optional to be provided in a ship request and valid if the origin/destination pair is US/US or PR/PR.

You can enter up to two customer references on package level by providing: the type(s) and value(s) in the request.

Valid values for types are:

The type and value pair(s) should be entered as a string in this format: 'type1:value1; type2:value2'. For example, if the user wants to assign 2 references to this package, the PackageReference should be set to: 'AJ:123456; TN:123'.

You can also chose to bar code the first reference number's value on the shipping label by setting the BarCodeReference to True.

Reference information may also be used to track packages by reference.

For USPS, this is only used by Endicia labels, and is used as a reference value for logs.

This is used in Canada Post to provide user-defined values, such as an internal "orderID".

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageShippingLabel Property (FedExFreightShip Component)

Image of the shipping label for this package returned by the Server upon a successful ship response.

Syntax

__property String PackageShippingLabel[int PackageIdx] = { read=FPackageShippingLabel };
__property DynamicArray<Byte> PackageShippingLabelB[int PackageIdx] = { read=FPackageShippingLabelB };

Default Value

""

Remarks

Image of the shipping label for this package returned by the Server upon a successful ship response.

This is the decoded binary image file of the shipping label, stored in memory upon successful ship response. The kind of label data returned depends on the label formatting specified in your ship request via LabelImageType. If you requested a GIF label, the data returned will be a GIF file. If you requested a thermal label, it will be a thermal label image. If the PackageShippingLabelFile is set to a valid path and filename, the label is also saved to disk in a LabelImageType format.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PackageShippingLabelFile Property (FedExFreightShip Component)

Filename and location to save the ShippingLabel of this package to.

Syntax

__property String PackageShippingLabelFile[int PackageIdx] = { read=FPackageShippingLabelFile, write=FSetPackageShippingLabelFile };

Default Value

""

Remarks

Filename and location to save the PackageShippingLabel of this package to. When the PackageShippingLabelFile is set to a valid path and filename, the contents of the PackageShippingLabel are written to disk upon successful response.

This filename should have the same extension defined by LabelImageType (for example, if LabelImageType is set to GIF, then PackageShippingLabelFile has to have .gif extension).

If the filename exists, you can choose to overwrite it or not by setting the Overwrite config setting (which defaults to True).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageSignatureType Property (FedExFreightShip Component)

Specifies one of the Delivery Signature Options requested for this package.

Syntax

__property TibxFedExFreightShipPackageSignatureTypes PackageSignatureType[int PackageIdx] = { read=FPackageSignatureType, write=FSetPackageSignatureType };

enum TibxFedExFreightShipPackageSignatureTypes {
  stServiceDefault=0,
  stAdult=1,
  stDirect=2,
  stIndirect=3,
  stNoSignatureRequired=4,
  stUSPSDeliveryConfirmation=5,
  stAdult19=6
};

Default Value

stServiceDefault

Remarks

Specifies one of the Delivery Signature Options requested for this package. Possible values are:

For FedEx Express shipments, the NoSignatureRequired option will not be allowed when the following special services are requested: Alcohol, Hold At Location or Dangerous Goods.

For residential FedEx Ground International shipments from Canada to the U.S., two valid signature options are allowed: NoSignatureRequired and Direct.

The impact of signature options fees may vary depending on your agreement with FedEx. Following are the definitions for FedEx:

• Service Default: In this case, the appropriate signature option will be selected for your shipping service. For example, if the package contains Dangerous Goods, the Direct signature option is chosen for you. The actual signature option applied to this package could be different than the signature option requested if a conflict occurred with other service features in the package. In this case, the value set in the request will be ignored.
• Indirect Signature Required: Indicates that an indirect signature is required upon delivery. This is allowed to residential addresses only. In this case, FedEx obtains a signature in one of three ways: from any person at the delivery address, from a neighbor, building manager, or other person at a neighboring address. The recipient can sign a FedEx door tag authorizing release of the package without anyone present. This might affect the shipping rates and/or service availability.
• Direct Signature Required: Indicates that a direct signature is required upon delivery. In this case, FedEx obtains a signature from any person at the delivery address. If no one is at the address, FedEx will reattempt delivery; Direct Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This option is not available for Hold at FedEx Location shipments. This might affect the shipping rates and/or service availability.
• Adult Signature Required: Indicates that the adult signature is required upon delivery. In this case, FedEx obtains a signature from any person at least 21 years old (government-issued photo identification required) at the delivery address. If no one is at the address, FedEx will reattempt delivery. Adult Signature Required overrides any recipient release that may be on file for deliveries to nonresidential addresses. This might affect the shipping rates and/or service availability.

Note: In the server reply, this option may differ from that requested value due to other characteristics of the shipment.

For UPS, when delivery confirmation is requested for a package, the PackageSignatureType should be set to a value other than 0 (stServiceDefault). The availability of this special service depends on the ServiceType. The type stIndirect is not valid for UPS packages.

Also, when using UPS Mail Innovations, delivery confirmation can be requested by setting this to stUSPSDeliveryConfirmation.

Delivery Confirmation and COD cannot coexist on a single package. Also, Delivery Confirmation option cannot be combined with the Return Services option.

For USPS, if this is not set to stServiceDefault or stNoSignatureRequired, the Signature Confirmation service will be used. Also, for Express label shipments, set this to stNoSignatureRequired to waive the signature requirements.

This does not apply for Canada Post.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PackageSpecialServices Property (FedExFreightShip Component)

Contains the collection of special services offered on the package level.

Syntax

__property __int64 PackageSpecialServices[int PackageIdx] = { read=FPackageSpecialServices, write=FSetPackageSpecialServices };

Default Value

0

Remarks

Contains the collection of special services offered on the package level. Valid values are:

For FedEx, to request any of the special services offered for a particular package in a ship request, you must set the PackageSpecialServices of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below for FedEx:

• Appointment Delivery: Indicates that the appointment delivery special service is requested for this package. This might affect the shipping rates and/or service availability.
• Dangerous Goods: Indicates that this package contains dangerous goods. When the PackageSpecialServices contains this flag, then the PackageDangerousGoodsAccessible is required to be provided in the request as well. For FedEx Express services, these types of shipments are referred to as dangerous goods shipments. For FedEx Ground services, these types of shipments are referred to as hazardous materials (Hazmat) shipments. Hazmat shipments must be single package. FedEx Ground provides reliable delivery of hazardous materials in all U.S. states except Alaska and Hawaii. If you have not shipped hazardous materials with FedEx Ground before, contact your FedEx account executive first. FedEx needs to confirm that you have met government training requirements and can generate the documentation your shipments need. Additional information regarding hazardous materials shipping is provided at fedex.com/ us/services/options under the Hazardous Materials link. The Shipper's Hazardous Materials Certification report (OP-950), prints after a successful Ground close request. Please note that Hazmat shipments must be single package. If you create a multiple package (MPS) hazmat shipment, only one commodity prints on the OP-950. FedEx assesses a surcharge on each package containing dangerous goods/Hazmat materials. This might affect service availability as well.
• Dry Ice: Indicates that this package contains dry ice. FedEx assesses a surcharge on each package containing dry ice. This might affect service availability as well.
• Priority Alert: Indicates whether the priority alert special service is requested for this package. This is applicable to domestic shipments only. A per package surcharge is associated with Priority Alert. This is applicable for FedEx First Overnight and FedEx Priority Overnight. It can be associated with: Saturday Delivery, Hold Saturday, Hold at Location, Dangerous Goods, Dry Ice or Signature Service Option. Please note that Priority Alert requires a service contract. If you are interested in signing up for Priority Alert, contact your FedEx account executive.
• Non Standard Container: Indicates whether this package type is a non standard container. This might affect the shipping rates and/or service availability.
• COD: Indicates that this is a COD package. This service will affect shipping rates and service availability. This is applicable for domestic FedEx Express and Ground services, except FedEx Home Delivery premium. When shipping COD via FedEx Ground, the PackageCODAmount and PackageCODType must also be provided in the request.

For UPS, to request any of the special services offered for a particular package in a rate or ship request, you must set the PackageSpecialServices of that package to a set of valid flags.

The meaning and limitations for each special service option are listed below:

• Additional Handling: Indicates that additional handling special service is requested for this package. This might affect the shipping rates and/or service availability.
• Non Standard Container: Indicates whether this package type is to be considered a large package (a non standard container). Dimensions must be 130 to 165 inches: Length + (2 x Width) + (2 x Height). This might affect the shipping rates and/or service availability.

Some other special services on package level, such as COD, Delivery Confirmation, Insured Value, are already implemented respectively through the PackageCODAmount and PackageCODType, PackageSignatureType, and PackageInsuredValue.

This property is not applicable to USPS or Canada Post.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Long64

PackageTotalDiscount Property (FedExFreightShip Component)

Total Actual Discount applicable to this package.

Syntax

__property String PackageTotalDiscount[int PackageIdx] = { read=FPackageTotalDiscount };

Default Value

""

Remarks

Total Actual Discount applicable to this package.

This is normally specific to the FedEx PayorAccountNumber. It is used in the FedExShip and FedExShipIntl components only.

Please note that for MPS, the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the properties that store the rating information: PackageBaseCharge, PackageNetCharge, PackageTotalSurcharges, and PackageTotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is read-only and not available at design time.

Data Type

String

PackageTotalSurcharges Property (FedExFreightShip Component)

Total Actual Surcharges applicable to this package.

Syntax

__property String PackageTotalSurcharges[int PackageIdx] = { read=FPackageTotalSurcharges };

Default Value

""

Remarks

Total Actual Surcharges applicable to this package.

For FedEx, this is normally specific to the PayorAccountNumber. It is used in the FedExShip and FedExShipIntl components only.

Please note that for MPS, the FedEx server provides the rating information in two different ways for domestic and international shipments.

In MPS domestic shipments, the rating information is available on package level. In this case, the properties that store the rating information: PackageBaseCharge, PackageNetCharge, PackageTotalSurcharges, and PackageTotalDiscount, indicate the rate for that particular package.

While in MPS international shipments, the rating information is available on shipment level only and it is returned in the last package response. That being said, please note that: for all packages with index=0 to PackageCount - 2, the properties that store the rating information will be set to 'N/A', and in last package (at index=PackageCount - 1, these properties will contain the rate for the whole shipment.

For UPS, upon a successful response, this is returned in the server reply for each package included in the shipment.

This does not apply to USPS packages.

For Canada Post, upon a successful response, this is returned in the server reply for the package requested.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is read-only and not available at design time.

Data Type

String

PackageTrackingNumber Property (FedExFreightShip Component)

Tracking number assigned to this package.

Syntax

__property String PackageTrackingNumber[int PackageIdx] = { read=FPackageTrackingNumber };

Default Value

""

Remarks

Tracking number assigned to this package. Upon successful request, this is returned in the server reply for each package included in the shipment.

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is read-only and not available at design time.

Data Type

String

PackageWeight Property (FedExFreightShip Component)

Weight of this package.

Syntax

__property String PackageWeight[int PackageIdx] = { read=FPackageWeight, write=FSetPackageWeight };

Default Value

"0.0"

Remarks

Weight of this package.

For FedEx, this is required to be provided in the request. It requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

For UPS, this is required to be provided in the request for each package contained in the shipment if PackagePackagingType is set to a value other than 0 (UPS Letter). For Ground shipments, if the actual weight is less than 150 pounds, then the billable weight is 150 pounds. Air and 3 Day Select shipments will not be subject to a minimum billable weight. Format: it requires one explicit decimal position in pounds or kilograms, depending on the value of the WeightUnit config, (i.e. N.N formatting).

Note that if the ServiceType stUPSSurePostLessThan1LB or stUPSFirstClassMail is used, or the ServiceType stUPSExpeditedMailInovations is used with the PackagePackagingType ptMachineables, ptIrregulars, or ptStandardFlat then the weight must be specified in ounces. The WeightUnit config will be set automatically to "OZS" if not set.

For USPS, this must be the weight in pounds and ounces of the package. Package weight cannot exceed 70 pounds. (First-Class Mail cannot exceed 13 ounces. Bound Printed Matter cannot exceed 15 pounds). On international shipments, weight limits vary by country.

The format must be in "N lbs N oz", or as an integer showing the number of ounces. For example, a package with weight 6 lbs, 8 oz can be specified as "6 lbs 8 oz" or as "104".

However, in USPS, if PostageProvider is set to ppEndicia, then the format must be one explicit decimal position in ounces (i.e. N.N formatting).

For Canada Post, the weight of the parcel should be specified in kilograms (e.g. 99.999).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

String

PackageWidth Property (FedExFreightShip Component)

The width of the package to be shipped.

Syntax

__property int PackageWidth[int PackageIdx] = { read=FPackageWidth, write=FSetPackageWidth };

Default Value

0

Remarks

The width of the package to be shipped.

For FedEx, the PackageWidth is optional, but recommended, if "Your Packaging" is used as PackagePackagingType. This is required if PackageLength and PackageHeight are provided in the request. It is also required if a FedEx Express heavyweight service is selected for the shipment.

For UPS, this is the width of the package used to determine dimensional weight and therefore is recommended for all shipments.

It is required for GB to GB, and Poland to Poland shipments, and for 'Pallete' packaging type. For UPS packaging types: the length, width and height are defaulted.

Length + 2*(Width+Height) must be less than or equal to 130 IN or 330 CM. When PackageWidth is provided in the request, then all other dimensions (PackageLength and PackageHeight) are to be set as well.

For USPS, this is only required if the package is irregular and the PackagePackagingType property is set to ptNonRectangular. (In this case PackageWidth and PackageHeight must still be set).

Note: For parcels, PackageLength is the measurement of the longest dimension and PackageWidth and PackageHeight make up the other two dimensions. PackageGirth is the measurement around the thickest part of the package, perpendicular to the length.

Except for Parcel Post, no mailpiece may measure more than 108 inches in length and girth combined. Parcel Post pieces measuring over 108 inches, but not more than 130 inches in combined length and girth are mailable at the applicable oversized rate.

Note that the PackageLength, PackageWidth, and PackageHeight are required for Priority Mail packages when the PackageSize is set to psLarge.

Note also that this applies to Endicia shipping label requests.

For Canada Post, this field should be set to the second longest dimension (3.1 digits e.g. 999.9 pattern).

The PackageIdx parameter specifies the index of the item in the array. The size of the array is controlled by the PackageCount property.

This property is not available at design time.

Data Type

Integer

PayorAccountNumber Property (FedExFreightShip Component)

The account number of the party responsible for payment (shipping charges, or duties and taxes).

Syntax

__property String PayorAccountNumber = { read=FPayorAccountNumber, write=FSetPayorAccountNumber };

Default Value

""

Remarks

The account number of the party responsible for payment (shipping charges, or duties and taxes).

This is required to be provided in the ship request, only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. Otherwise, it defaults to PayorAccountNumber.

Data Type

String

PayorAddress1 Property (FedExFreightShip Component)

Street name.

Syntax

__property String PayorAddress1 = { read=FPayorAddress1, write=FSetPayorAddress1 };

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. Combination of PayorAddress1 and PayorAddress2 should not exceed 35 characters.

Data Type

String

PayorAddress2 Property (FedExFreightShip Component)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

__property String PayorAddress2 = { read=FPayorAddress2, write=FSetPayorAddress2 };

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. Combination of PayorAddress1 and PayorAddress2 should not exceed 35 characters.

Data Type

String

PayorCity Property (FedExFreightShip Component)

Name of city, town, etc.

Syntax

__property String PayorCity = { read=FPayorCity, write=FSetPayorCity };

Default Value

""

Remarks

Name of city, town, etc.

Data Type

String

PayorCountryCode Property (FedExFreightShip Component)

The country code for the payor of the shipment, or duties and taxes.

Syntax

__property String PayorCountryCode = { read=FPayorCountryCode, write=FSetPayorCountryCode };

Default Value

"US"

Remarks

The country code for the payor of the shipment, or duties and taxes.

When shipping via FedEx Express, the PayorCountryCode is required to be provided in the ship request only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. For FedEx Ground shipments, the PayorCountryCode is required only if PayorType is set to 'THIRDPARTY'.

For UPS, this should be the same as it was entered in the UPS system when this account was set up. In domestic shipments, it will always default to US.

Data Type

String

PayorName Property (FedExFreightShip Component)

Identifies the payor's name.

Syntax

__property String PayorName = { read=FPayorName, write=FSetPayorName };

Default Value

""

Remarks

Identifies the payor's name.

PayorName is required only if PayorType is set to 'THIRDPARTY'.

Note: This property is only applicable to UPSFreightRates and UPSFreightShip.

Data Type

String

PayorType Property (FedExFreightShip Component)

Method of payment for shipment, or duties and taxes.

Syntax

__property TibxFedExFreightShipPayorTypes PayorType = { read=FPayorType, write=FSetPayorType };

enum TibxFedExFreightShipPayorTypes {
  ptSender=0,
  ptRecipient=1,
  ptThirdParty=2,
  ptCollect=3,
  ptConsignee=4
};

Default Value

ptSender

Remarks

Method of payment for shipment, or duties and taxes. This is required to be provided in a ship request. Valid payment types are:

The COLLECT payment type is only supported in FedEx Ground services. The CONSIGNEE type is only supported in UPS service.

For FedEx, when this property is set to a value other than 0 (ptSender), the PayorAccountNumber and PayorCountryCode are required to be provided in the request as well. Otherwise, those will default to FedExAccountNumber and SenderCountryCode.

For UPS, when set to ptSender, the PayorAccountNumber is automatically set to UPSAccountNumber. When ptRecipient is specified, PayorAccountNumber and PayorZipCode are required to be provided in the request. For return international shipments, this option is invalid for transportation charges. And, when ptThirdParty has been specified, the PayorAccountNumber, PayorZipCode and PayorCountryCode are required to be provided in the request. When ptConsignee is specified, it indicates that UPS Consignee Billing option is selected, no other fields need to be set. ptConsignee only applies to US/PR and PR/US shipment origins and destination.

Data Type

Integer

PayorState Property (FedExFreightShip Component)

State or province code.

Syntax

__property String PayorState = { read=FPayorState, write=FSetPayorState };

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

PayorZipCode Property (FedExFreightShip Component)

Payor's postal code (if applicable).

Syntax

__property String PayorZipCode = { read=FPayorZipCode, write=FSetPayorZipCode };

Default Value

""

Remarks

Payor's postal code (if applicable).

This is only applicable to UPS and is the corresponding postal code of the UPS PayorAccountNumber's pickup address. This should be the same as it was entered in the UPS system when this account was set up.

It can be provided in a ship request only if the PayorType is set to 1 (RECIPIENT) or 2 (THIRDPARTY).

Maximum length: 10.

Data Type

String

PickupPaymentType Property (FedExFreightShip Component)

The payment type for the pickup.

Syntax

__property TibxFedExFreightShipPickupPaymentTypes PickupPaymentType = { read=FPickupPaymentType, write=FSetPickupPaymentType };

enum TibxFedExFreightShipPickupPaymentTypes {
  pptSender=0,
  pptRecipient=1,
  pptThirdParty=2,
  pptCollect=3,
  pptAccount=4,
  pptCash=5,
  pptCreditCard=6
};

Default Value

pptSender

Remarks

This indicates the payment method to be used for a pickup.

Note that if pptCreditCard is selected, FedEx will use the credit card on file with the account associated with the FedExAccountNumber

Data Type

Integer

PickupType Property (FedExFreightShip Component)

Pickup type used for the shipment that rate is requested for.

Syntax

__property TibxFedExFreightShipPickupTypes PickupType = { read=FPickupType, write=FSetPickupType };

enum TibxFedExFreightShipPickupTypes {
  fptDropoffAtFedexLocation=0,
  fptContactFedexToSchedule=1,
  fptUseScheduledPickup=2,
  fptOnCall=3,
  fptPackageReturnProgram=4,
  fptRegularStop=5,
  fptTag=6,
  fptNone=7
};

Default Value

fptDropoffAtFedexLocation

Remarks

Indicate the pickup type method by which the shipment to be tendered to FedEx.

Valid values are:

Data Type

Integer

ProxyAuthScheme Property (FedExFreightShip Component)

This property is used to tell the component which type of authorization to perform when connecting to the proxy.

Syntax

__property TibxFedExFreightShipProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };

enum TibxFedExFreightShipProxyAuthSchemes {
  authBasic=0,
  authDigest=1,
  authProprietary=2,
  authNone=3,
  authNtlm=4,
  authNegotiate=5
};

Default Value

authBasic

Remarks

This property is used to tell the component which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (FedExFreightShip Component)

This property tells the component whether or not to automatically detect and use proxy system settings, if available.

Syntax

__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (FedExFreightShip Component)

This property contains a password if authentication is to be used for the proxy.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (FedExFreightShip Component)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (FedExFreightShip Component)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (FedExFreightShip Component)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

__property TibxFedExFreightShipProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };

enum TibxFedExFreightShipProxySSLs {
  psAutomatic=0,
  psAlways=1,
  psNever=2,
  psTunnel=3
};

Default Value

psAutomatic

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (FedExFreightShip Component)

This property contains a username if authentication is to be used for the proxy.

Syntax

__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

RecipientAddress1 Property (FedExFreightShip Component)

Street name.

Syntax

__property String RecipientAddress1 = { read=FRecipientAddress1, write=FSetRecipientAddress1 };

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS RecipientAddress1 should not exceed 35 characters.

Data Type

String

RecipientAddress2 Property (FedExFreightShip Component)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

__property String RecipientAddress2 = { read=FRecipientAddress2, write=FSetRecipientAddress2 };

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS RecipientAddress2 should not exceed 35 characters.

Data Type

String

RecipientAddressFlags Property (FedExFreightShip Component)

Various flags that denote information about the address.

Syntax

__property int RecipientAddressFlags = { read=FRecipientAddressFlags, write=FSetRecipientAddressFlags };

Default Value

0

Remarks

Various flags that denote information about the address.

Data Type

Integer

RecipientCity Property (FedExFreightShip Component)

Name of city, town, etc.

Syntax

__property String RecipientCity = { read=FRecipientCity, write=FSetRecipientCity };

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

RecipientCountryCode Property (FedExFreightShip Component)

Country code.

Syntax

__property String RecipientCountryCode = { read=FRecipientCountryCode, write=FSetRecipientCountryCode };

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

RecipientState Property (FedExFreightShip Component)

State or province code.

Syntax

__property String RecipientState = { read=FRecipientState, write=FSetRecipientState };

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

RecipientZipCode Property (FedExFreightShip Component)

Postal code.

Syntax

__property String RecipientZipCode = { read=FRecipientZipCode, write=FSetRecipientZipCode };

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both RecipientCity and RecipientState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

RecipientCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String RecipientCompany = { read=FRecipientCompany, write=FSetRecipientCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either RecipientFirstName and RecipientLastName or RecipientCompany are required to be provided.

Data Type

String

RecipientEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String RecipientEmail = { read=FRecipientEmail, write=FSetRecipientEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

RecipientFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String RecipientFax = { read=FRecipientFax, write=FSetRecipientFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

RecipientFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String RecipientFirstName = { read=FRecipientFirstName, write=FSetRecipientFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either RecipientFirstName and RecipientLastName or RecipientCompany must be sent.

Data Type

String

RecipientLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String RecipientLastName = { read=FRecipientLastName, write=FSetRecipientLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either RecipientFirstName and RecipientLastName or RecipientCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

RecipientMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String RecipientMiddleInitial = { read=FRecipientMiddleInitial, write=FSetRecipientMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

RecipientPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String RecipientPhone = { read=FRecipientPhone, write=FSetRecipientPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

RequestedETDDocuments Property (FedExFreightShip Component)

Specifies which document type to request copies of when using Electronic Trade Document Special Service.

Syntax

__property int RequestedETDDocuments = { read=FRequestedETDDocuments, write=FSetRequestedETDDocuments };

Default Value

0

Remarks

This specifies which documents you would like to get copies of when using FedEx Special Services to generate and send the documents electronically (Electronic Trade Documents option is set in the ShipmentSpecialServices). Note that not all customs offices support Electronic Trade Documents (ETD). For a full list of countries that support ETD, you can go to http://images.fedex.com/international/pdf/FedExElectronicTradeDocuments_Coverage.pdf.

Make sure to specify in the ShippingDocumentFile config the location where you want to save the documents.

To request one or more ETD documents be generated by FedEx you will need to set of flags as listed below (specified in hexadecimal notation). They can be or-ed together to include multiple conditions:

Note this only applies when shipping internationally.

Data Type

Integer

ReturnAddress1 Property (FedExFreightShip Component)

Street name.

Syntax

__property String ReturnAddress1 = { read=FReturnAddress1, write=FSetReturnAddress1 };

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS ReturnAddress1 should not exceed 35 characters.

Data Type

String

ReturnAddress2 Property (FedExFreightShip Component)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

__property String ReturnAddress2 = { read=FReturnAddress2, write=FSetReturnAddress2 };

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS ReturnAddress2 should not exceed 35 characters.

Data Type

String

ReturnAddressFlags Property (FedExFreightShip Component)

Various flags that denote information about the address.

Syntax

__property int ReturnAddressFlags = { read=FReturnAddressFlags, write=FSetReturnAddressFlags };

Default Value

0

Remarks

Various flags that denote information about the address.

Data Type

Integer

ReturnCity Property (FedExFreightShip Component)

Name of city, town, etc.

Syntax

__property String ReturnCity = { read=FReturnCity, write=FSetReturnCity };

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

ReturnCountryCode Property (FedExFreightShip Component)

Country code.

Syntax

__property String ReturnCountryCode = { read=FReturnCountryCode, write=FSetReturnCountryCode };

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

ReturnState Property (FedExFreightShip Component)

State or province code.

Syntax

__property String ReturnState = { read=FReturnState, write=FSetReturnState };

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

ReturnZipCode Property (FedExFreightShip Component)

Postal code.

Syntax

__property String ReturnZipCode = { read=FReturnZipCode, write=FSetReturnZipCode };

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both ReturnCity and ReturnState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

ReturnCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String ReturnCompany = { read=FReturnCompany, write=FSetReturnCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either ReturnFirstName and ReturnLastName or ReturnCompany are required to be provided.

Data Type

String

ReturnEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String ReturnEmail = { read=FReturnEmail, write=FSetReturnEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

ReturnFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String ReturnFax = { read=FReturnFax, write=FSetReturnFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

ReturnFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String ReturnFirstName = { read=FReturnFirstName, write=FSetReturnFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either ReturnFirstName and ReturnLastName or ReturnCompany must be sent.

Data Type

String

ReturnLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String ReturnLastName = { read=FReturnLastName, write=FSetReturnLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either ReturnFirstName and ReturnLastName or ReturnCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

ReturnMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String ReturnMiddleInitial = { read=FReturnMiddleInitial, write=FSetReturnMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

ReturnPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String ReturnPhone = { read=FReturnPhone, write=FSetReturnPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

SenderAddress1 Property (FedExFreightShip Component)

Street name.

Syntax

__property String SenderAddress1 = { read=FSenderAddress1, write=FSetSenderAddress1 };

Default Value

""

Remarks

Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS SenderAddress1 should not exceed 35 characters.

Data Type

String

SenderAddress2 Property (FedExFreightShip Component)

A specific detail on the address (such as building, suite, apartment, floor number etc.

Syntax

__property String SenderAddress2 = { read=FSenderAddress2, write=FSetSenderAddress2 };

Default Value

""

Remarks

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS SenderAddress2 should not exceed 35 characters.

Data Type

String

SenderAddressFlags Property (FedExFreightShip Component)

Various flags that denote information about the address.

Syntax

__property int SenderAddressFlags = { read=FSenderAddressFlags, write=FSetSenderAddressFlags };

Default Value

0

Remarks

Various flags that denote information about the address.

Data Type

Integer

SenderCity Property (FedExFreightShip Component)

Name of city, town, etc.

Syntax

__property String SenderCity = { read=FSenderCity, write=FSetSenderCity };

Default Value

""

Remarks

Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient.

Data Type

String

SenderCountryCode Property (FedExFreightShip Component)

Country code.

Syntax

__property String SenderCountryCode = { read=FSenderCountryCode, write=FSetSenderCountryCode };

Default Value

"US"

Remarks

Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2.

Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.

* Not supported by USPS

** Has multiple values, the values used for USPS are below

Data Type

String

SenderState Property (FedExFreightShip Component)

State or province code.

Syntax

__property String SenderState = { read=FSenderState, write=FSetSenderState };

Default Value

""

Remarks

State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country.

Data Type

String

SenderZipCode Property (FedExFreightShip Component)

Postal code.

Syntax

__property String SenderZipCode = { read=FSenderZipCode, write=FSetSenderZipCode };

Default Value

""

Remarks

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country.

In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both SenderCity and SenderState are not present.

Valid characters: A-Z; 0-9; a-z. Maximum length: 16.

Data Type

String

SenderCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String SenderCompany = { read=FSenderCompany, write=FSetSenderCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either SenderFirstName and SenderLastName or SenderCompany are required to be provided.

Data Type

String

SenderEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String SenderEmail = { read=FSenderEmail, write=FSetSenderEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

SenderFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String SenderFax = { read=FSenderFax, write=FSetSenderFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

SenderFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String SenderFirstName = { read=FSenderFirstName, write=FSetSenderFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either SenderFirstName and SenderLastName or SenderCompany must be sent.

Data Type

String

SenderLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String SenderLastName = { read=FSenderLastName, write=FSetSenderLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either SenderFirstName and SenderLastName or SenderCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

SenderMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String SenderMiddleInitial = { read=FSenderMiddleInitial, write=FSetSenderMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

SenderPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String SenderPhone = { read=FSenderPhone, write=FSetSenderPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

ServiceType Property (FedExFreightShip Component)

Identifies the FedEx domestic service to use in a ship request.

Syntax

__property TibxFedExFreightShipServiceTypes ServiceType = { read=FServiceType, write=FSetServiceType };

enum TibxFedExFreightShipServiceTypes {
  stUnspecified=0,
  stFedExPriorityOvernight=10,
  stFedExStandardOvernight=11,
  stFedExFirstOvernight=12,
  stFedEx2Day=13,
  stFedExExpressSaver=14,
  stFedExGround=15,
  stFedExGroundHomeDelivery=16,
  stFedEx1DayFreight=17,
  stFedEx2DayFreight=18,
  stFedEx3DayFreight=19,
  stFedExInternationalPriority=20,
  stFedExInternationalEconomy=21,
  stFedExInternationalFirst=22,
  stFedExInternationalPriorityFreight=23,
  stFedExInternationalEconomyFreight=24,
  stFedExEuropeFirstInternationalPriority=25,
  stFedExSmartPost=26,
  stFedEx2DayAM=27,
  stFedExFirstFreight=28,
  stFedExInternationalGround=29,
  stFedExFreightEconomy=30,
  stFedExFreightPriority=31,
  stFedExInternationalPriorityExpress=32,
  stFedExInternationalConnectPlus=33,
  stUPSFirstClass=35,
  stUPSPriorityMail=36,
  stUPSExpeditedMailInnovations=37,
  stUPSPriorityMailInnovations=38,
  stUPSEconomyMailInnovations=39,
  stUPSNextDayAir=40,
  stUPSExpress=41,
  stUPS2ndDayAir=42,
  stUPSGround=43,
  stUPSWorldwideExpress=44,
  stUPSWorldwideExpedited=45,
  stUPSExpedited=46,
  stUPSStandard=47,
  stUPS3DaySelect=48,
  stUPSNextDayAirSaver=49,
  stUPSSaver=50,
  stUPSNextDayAirEarlyAM=51,
  stUPSExpressEarlyAM=52,
  stUPSWorldwideExpressPlus=53,
  stUPSExpressPlus=54,
  stUPS2ndDayAirAM=55,
  stUPSTodayStandard=56,
  stUPSTodayCourrier=57,
  stUPSTodayInterCity=58,
  stUPSTodayExpress=59,
  stUPSTodayExpressSaver=60,
  stUPSWorldwideExpressFreight=61,
  stUPSSurePostLessThan1LB=62,
  stUPSSurePost1LBOrGreater=63,
  stUPSSurePostBPM=64,
  stUPSSurePostMedia=65,
  stUSPSExpress=70,
  stUSPSFirstClass=71,
  stUSPSPriority=72,
  stUSPSParcelPost=73,
  stUSPSBPM=74,
  stUSPSMedia=75,
  stUSPSLibrary=76,
  stUSPSOnline=77,
  stUSPSGlobalExpress=78,
  stUSPSParcelSelect=79,
  stUSPSCriticalMail=80,
  stUSPSStandardMail=81,
  stUSPSExpressMailInternational=82,
  stUSPSFirstClassMailInternational=83,
  stUSPSPriorityMailInternational=84,
  stUSPSPriorityExpress=85,
  stUSPSRetailGround=86,
  stUSPSFirstClassPackageInternationalService=87,
  stUSPSPriorityMailExpressInternational=88,
  stCanadaRegularParcel=90,
  stCanadaExpeditedParcel=91,
  stCanadaXpresspost=92,
  stCanadaLibrary=93,
  stCanadaPriority=94,
  stCanadaPriorityEnvelopeUSA=95,
  stCanadaPriorityPakUSA=96,
  stCanadaPriorityParcelUSA=97,
  stCanadaXpresspostUSA=98,
  stCanadaExpeditedParcelUSA=99,
  stCanadaSmallPacketAirUSA=100,
  stCanadaTrackedPacketUSA=101,
  stCanadaTrackedPacketLVMUSA=102,
  stCanadaPriorityEnvelopeInternational=103,
  stCanadaPriorityPakInternational=104,
  stCanadaPriorityParcelInternational=105,
  stCanadaXpresspostInternational=106,
  stCanadaSmallPacketAirInternational=107,
  stCanadaSmallPacketLandInternational=108,
  stCanadaParcelAirInternational=109,
  stCanadaParcelLandInternational=110,
  stCanadaTrackedPacketInternational=111,
  stFedExSameDay=126,
  stFedExSameDayCity=127,
  stFedExSameDayMetroAfternoon=128,
  stFedExSameDayMetroMorning=129,
  stFedExSameDayMetroRush=130,
  stUPSWorldwideEconomyDDU=131,
  stUPSWorldwideEconomyDDP=132,
  stUSPSParcelSelectGround=133,
  stUSPSPriorityMailCubic=134,
  stUSPSGroundAdvantage=135,
  stUSPSGroundAdvantageCubic=136,
  stFedExFirst=140,
  stFedExPriority=141,
  stFedExPriorityExpress=142,
  stFedExPriorityExpressFreight=143,
  stFedExPriorityFreight=144,
  stFedExEconomySelect=145
};

Default Value

stUnspecified

Remarks

This property is required to be provided in a ship request.

Possible values are:

For all services, the following guidelines apply:

• Packages/skids must wight more than 150 lbs.
• Individual pallets/skids weighing in excess of 2200 lbs or larger than 70" in height, 119" in length, or 80" in width require prior approval by FedEx.
• Service days are Monday through Friday, with Saturday pickup and delivery available to many major markets.

This property is not available at design time.

Data Type

Integer

ShipDate Property (FedExFreightShip Component)

The date on which the package will be tendered to FedEx.

Syntax

__property String ShipDate = { read=FShipDate, write=FSetShipDate };

Default Value

""

Remarks

This is required to be provided in a ship request. The date should be the current date, or a date no more than 10 days in the future.

Defaults to current system date if not present.

This property is also required to be used for the PickupAvailability and SchedulePickup methods. It is used by these methods to tell FedEx when to pickup the packages.

Format: YYYY-MM-DD (e.g. 2024-09-30).

Data Type

String

ShipmentInfoAccountNumber Property (FedExFreightShip Component)

This is the account number to be used with a freight shipment.

Syntax

__property String ShipmentInfoAccountNumber = { read=FShipmentInfoAccountNumber, write=FSetShipmentInfoAccountNumber };

Default Value

""

Remarks

This is the account number to be used with a freight shipment. This is required when submitting a freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingAccountNumber Property (FedExFreightShip Component)

This should be set to the alternate account number to be billed.

Syntax

__property String ShipmentInfoAlternateBillingAccountNumber = { read=FShipmentInfoAlternateBillingAccountNumber, write=FSetShipmentInfoAlternateBillingAccountNumber };

Default Value

""

Remarks

This should be set to the alternate account number to be billed. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingCity Property (FedExFreightShip Component)

This should be set to the city associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingCity = { read=FShipmentInfoAlternateBillingCity, write=FSetShipmentInfoAlternateBillingCity };

Default Value

""

Remarks

This should be set to the city associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingCompanyName Property (FedExFreightShip Component)

This should be set to the name of the company associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingCompanyName = { read=FShipmentInfoAlternateBillingCompanyName, write=FSetShipmentInfoAlternateBillingCompanyName };

Default Value

""

Remarks

This should be set to the name of the company associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingCountryCode Property (FedExFreightShip Component)

This should be set to the country code associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingCountryCode = { read=FShipmentInfoAlternateBillingCountryCode, write=FSetShipmentInfoAlternateBillingCountryCode };

Default Value

""

Remarks

This should be set to the country code associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingPersonName Property (FedExFreightShip Component)

This should be set to the name of the person associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingPersonName = { read=FShipmentInfoAlternateBillingPersonName, write=FSetShipmentInfoAlternateBillingPersonName };

Default Value

""

Remarks

This should be set to the name of the person associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingPhone Property (FedExFreightShip Component)

This should be set to the phone associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingPhone = { read=FShipmentInfoAlternateBillingPhone, write=FSetShipmentInfoAlternateBillingPhone };

Default Value

""

Remarks

This should be set to the phone associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingState Property (FedExFreightShip Component)

This should be set to the state associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingState = { read=FShipmentInfoAlternateBillingState, write=FSetShipmentInfoAlternateBillingState };

Default Value

""

Remarks

This should be set to the state associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingStreetAddress Property (FedExFreightShip Component)

This should be set to the street address associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingStreetAddress = { read=FShipmentInfoAlternateBillingStreetAddress, write=FSetShipmentInfoAlternateBillingStreetAddress };

Default Value

""

Remarks

This should be set to the street address associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoAlternateBillingZipCode Property (FedExFreightShip Component)

This should be set to the zip code associated with the account number set in FreightAlternateBillingAccountNumber .

Syntax

__property String ShipmentInfoAlternateBillingZipCode = { read=FShipmentInfoAlternateBillingZipCode, write=FSetShipmentInfoAlternateBillingZipCode };

Default Value

""

Remarks

This should be set to the zip code associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingAddress1 Property (FedExFreightShip Component)

This should be set to the first address line listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingAddress1 = { read=FShipmentInfoBillingAddress1, write=FSetShipmentInfoBillingAddress1 };

Default Value

""

Remarks

This should be set to the first address line listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingAddress2 Property (FedExFreightShip Component)

This should be set to the second address line listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingAddress2 = { read=FShipmentInfoBillingAddress2, write=FSetShipmentInfoBillingAddress2 };

Default Value

""

Remarks

This should be set to the second address line listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingCity Property (FedExFreightShip Component)

This should be set to the city listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingCity = { read=FShipmentInfoBillingCity, write=FSetShipmentInfoBillingCity };

Default Value

""

Remarks

This should be set to the city listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingCompanyName Property (FedExFreightShip Component)

This should be set to the name of the company listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingCompanyName = { read=FShipmentInfoBillingCompanyName, write=FSetShipmentInfoBillingCompanyName };

Default Value

""

Remarks

This should be set to the name of the company listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingCountryCode Property (FedExFreightShip Component)

This should be set to the country code listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingCountryCode = { read=FShipmentInfoBillingCountryCode, write=FSetShipmentInfoBillingCountryCode };

Default Value

""

Remarks

This should be set to the country code listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingEmail Property (FedExFreightShip Component)

This should be set to the email address listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingEmail = { read=FShipmentInfoBillingEmail, write=FSetShipmentInfoBillingEmail };

Default Value

""

Remarks

This should be set to the email address listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingFax Property (FedExFreightShip Component)

This should be set to the fax number listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingFax = { read=FShipmentInfoBillingFax, write=FSetShipmentInfoBillingFax };

Default Value

""

Remarks

This should be set to the fax number listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingPersonName Property (FedExFreightShip Component)

This should be set to the name of the person listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingPersonName = { read=FShipmentInfoBillingPersonName, write=FSetShipmentInfoBillingPersonName };

Default Value

""

Remarks

This should be set to the name of the person listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingPhone Property (FedExFreightShip Component)

This should be set to the phone number listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingPhone = { read=FShipmentInfoBillingPhone, write=FSetShipmentInfoBillingPhone };

Default Value

""

Remarks

This should be set to the phone number listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingState Property (FedExFreightShip Component)

This should be set to the state listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingState = { read=FShipmentInfoBillingState, write=FSetShipmentInfoBillingState };

Default Value

""

Remarks

This should be set to the state listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoBillingZipCode Property (FedExFreightShip Component)

This should be set to the zip code listed on the account associated with the FreightAccountNumber .

Syntax

__property String ShipmentInfoBillingZipCode = { read=FShipmentInfoBillingZipCode, write=FSetShipmentInfoBillingZipCode };

Default Value

""

Remarks

This should be set to the zip code listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoClientDiscountPercent Property (FedExFreightShip Component)

The estimated client discount rate for a freight shipment.

Syntax

__property String ShipmentInfoClientDiscountPercent = { read=FShipmentInfoClientDiscountPercent, write=FSetShipmentInfoClientDiscountPercent };

Default Value

""

Remarks

The estimated client discount rate for a freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoCollectTermsType Property (FedExFreightShip Component)

This sets the terms for how to collect payment for this freight shipment.

Syntax

__property TibxFedExFreightShipShipmentInfoCollectTermsTypes ShipmentInfoCollectTermsType = { read=FShipmentInfoCollectTermsType, write=FSetShipmentInfoCollectTermsType };

enum TibxFedExFreightShipShipmentInfoCollectTermsTypes {
  fctStandard=0,
  fctNonRecourseShipperSigned=1
};

Default Value

fctStandard

Remarks

This sets the terms for how to collect payment for this freight shipment. Default value is 0.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoComments Property (FedExFreightShip Component)

The description for this freight shipment.

Syntax

__property String ShipmentInfoComments = { read=FShipmentInfoComments, write=FSetShipmentInfoComments };

Default Value

""

Remarks

The description for this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoCoupons Property (FedExFreightShip Component)

This contains a semicolon delimited list of identifiers for promotional discounts offered to customers.

Syntax

__property String ShipmentInfoCoupons = { read=FShipmentInfoCoupons, write=FSetShipmentInfoCoupons };

Default Value

""

Remarks

This contains a semicolon delimited list of identifiers for promotional discounts offered to customers. For example: coupon1; coupon2; coupon3.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoDeclaredValue Property (FedExFreightShip Component)

The total declared value per unit for this freight shipment.

Syntax

__property String ShipmentInfoDeclaredValue = { read=FShipmentInfoDeclaredValue, write=FSetShipmentInfoDeclaredValue };

Default Value

""

Remarks

The total declared value per unit for this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoDeclaredValueUnits Property (FedExFreightShip Component)

Identifies the declared value units corresponding to the above defined declared value.

Syntax

__property String ShipmentInfoDeclaredValueUnits = { read=FShipmentInfoDeclaredValueUnits, write=FSetShipmentInfoDeclaredValueUnits };

Default Value

""

Remarks

Identifies the declared value units corresponding to the above defined declared value.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoEmergencyContactPhone Property (FedExFreightShip Component)

The phone number for the emergency contact.

Syntax

__property String ShipmentInfoEmergencyContactPhone = { read=FShipmentInfoEmergencyContactPhone, write=FSetShipmentInfoEmergencyContactPhone };

Default Value

""

Remarks

The phone number for the emergency contact. This is required if any of the Commodities line items contain hazardous materials.

Data Type

String

ShipmentInfoHazardousMaterialsOfferor Property (FedExFreightShip Component)

If this shipment contains hazardous materials, this should contain the offeror of the hazardous materials.

Syntax

__property String ShipmentInfoHazardousMaterialsOfferor = { read=FShipmentInfoHazardousMaterialsOfferor, write=FSetShipmentInfoHazardousMaterialsOfferor };

Default Value

""

Remarks

If this shipment contains hazardous materials, this should contain the offeror of the hazardous materials.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoLiabilityCoverageAmount Property (FedExFreightShip Component)

This should be set to the total value of the liability coverage.

Syntax

__property String ShipmentInfoLiabilityCoverageAmount = { read=FShipmentInfoLiabilityCoverageAmount, write=FSetShipmentInfoLiabilityCoverageAmount };

Default Value

""

Remarks

This should be set to the total value of the liability coverage.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoLiabilityCoverageType Property (FedExFreightShip Component)

This should be set to the type of liability coverage offered.

Syntax

__property TibxFedExFreightShipShipmentInfoLiabilityCoverageTypes ShipmentInfoLiabilityCoverageType = { read=FShipmentInfoLiabilityCoverageType, write=FSetShipmentInfoLiabilityCoverageType };

enum TibxFedExFreightShipShipmentInfoLiabilityCoverageTypes {
  lctNew=0,
  lctUsedOrReconditioned=1
};

Default Value

lctNew

Remarks

This should be set to the type of liability coverage offered.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoPalletWeight Property (FedExFreightShip Component)

This should contain the total weight of all pallets used in this freight shipment.

Syntax

__property String ShipmentInfoPalletWeight = { read=FShipmentInfoPalletWeight, write=FSetShipmentInfoPalletWeight };

Default Value

""

Remarks

This should contain the total weight of all pallets used in this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

String

ShipmentInfoRole Property (FedExFreightShip Component)

This indicates the role of the party is submitting the transaction for this freight shipment.

Syntax

__property TibxFedExFreightShipShipmentInfoRoles ShipmentInfoRole = { read=FShipmentInfoRole, write=FSetShipmentInfoRole };

enum TibxFedExFreightShipShipmentInfoRoles {
  fsrShipper=0,
  fsrConsignee=1
};

Default Value

fsrShipper

Remarks

This indicates the role of the party is submitting the transaction for this freight shipment.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalHandlingUnits Property (FedExFreightShip Component)

Total number of individual handling units in the entire shipment (for unit pricing).

Syntax

__property int ShipmentInfoTotalHandlingUnits = { read=FShipmentInfoTotalHandlingUnits, write=FSetShipmentInfoTotalHandlingUnits };

Default Value

1

Remarks

Total number of individual handling units in the entire shipment (for unit pricing).

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalHeight Property (FedExFreightShip Component)

This should be set to the total height of the shipment.

Syntax

__property int ShipmentInfoTotalHeight = { read=FShipmentInfoTotalHeight, write=FSetShipmentInfoTotalHeight };

Default Value

0

Remarks

This should be set to the total height of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalLength Property (FedExFreightShip Component)

This should be set to the total length of the shipment.

Syntax

__property int ShipmentInfoTotalLength = { read=FShipmentInfoTotalLength, write=FSetShipmentInfoTotalLength };

Default Value

0

Remarks

This should be set to the total length of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentInfoTotalWidth Property (FedExFreightShip Component)

This should be set to the total width of the shipment.

Syntax

__property int ShipmentInfoTotalWidth = { read=FShipmentInfoTotalWidth, write=FSetShipmentInfoTotalWidth };

Default Value

0

Remarks

This should be set to the total width of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Data Type

Integer

ShipmentSpecialServices Property (FedExFreightShip Component)

Contains the collection of special services offered by FedEx.

Syntax

__property __int64 ShipmentSpecialServices = { read=FShipmentSpecialServices, write=FSetShipmentSpecialServices };

Default Value

0

Remarks

To request any of the special services offered by FedEx, you must set the ShipmentSpecialServices to a set of flags as listed below, the following flags can be or-ed together in order to select multiple options:

The meaning and limitations for each special service option are listed below:

• Broker Select: Indicates that the broker select special service is requested. When shipping internationally, the customer might want to have their own broker to deal with the delivery (for customs purposes). To request such service, the BrokerSelect option should be set in the ShipmentSpecialServices value. This allows you to designate a specific customs broker other than FedEx (or a FedEx designated broker). This is applicable to the following international FedEx services:
  • stFedExInternationalPriority (20)
  • stFedExInternationalEconomy (21)
  • stFedExInternationalPriorityFreight (23)
  • stFedExInternationalEconomyFreight (24)
  • stFedExInternationalPriorityExpress (32)
  • stFedExInternationalConnectPlus (33)
  FedEx International Broker Select is a contract service. Before you begin using FedEx International Broker Select (BSO), you must contact your FedEx account executive to be enrolled for this service. An additional routing surcharge applies to your BSO shipments if you choose to have FedEx complete delivery after customs clearance and if your recipient and customs broker are served by different FedEx clearance points. This service is not valid with SaturdayPickup/SaturdayDelivery services. When this service is requested, then the ClearanceBrokerageType, BrokerType, BrokerContact, and BrokerAddress are required to be provided in the ship request as well.

  Note: Certain customs limitations may apply for BSO shipments. Contact FedEx Express International customer service at 1.800.247.4747 for requirements. Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.

• COD: Indicates that this is a COD shipment. This service will affect shipping rates and service availability. When set, the CODTotalAmount and CODType properties must be set. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Dangerous Goods: Indicates that the shipment contains dangerous goods. This service will affect shipping rates and service availability. When set, at least one CommodityHazardousMaterialsOptions must be selected and the ShipmentInfoEmergencyContactPhone must be set Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.
• Do Not Break Down Pallets: Indicates that the pallets should not be broken down. Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.
• Do Not Stack Pallets: Indicates that the pallets should not be stacked. Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.
• Dry Ice: Indicates that the shipment contains dry ice. This might affect the shipping rates and service availability. When this service is requested the DryIceCount and PackageDryIceWeight are required to be specified in the request (shipment level). Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.
• Electronic Trade Documents: This only applies when shipping internationally. FedEx will generate and submit your trade documents specified in the ShippingDocumentTypes electronically and you no longer need to print and attach them. Note that some countries do not accept Electronic Trade Documents (ETD). For a full list of countries that support ETD you can go to http://images.fedex.com/international/pdf/FedExElectronicTradeDocuments_Coverage.pdf.

  If you also want to receive copies of the FedEx generated documents use the RequestedETDDocuments property together with the ShippingDocumentFile config to specify the files you are requesting and the location where to save them. Note: This is only valid for FedEx International Economy Freight and FedEx International Priority Freight.

• Event Notification: Indicates that event notification is requested. This might affect the service availability. If this is requested in a ship request, then the Notify collection is required to be set. Note that this is only valid for FedEx First Overnight Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Extreme Length: This indicates that the pallet is longer than typically allowed. This requires prior clearance with FedEx.
• Food: This indicates that the shipment contains food items. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Freight Guarantee: This indicates that the freight shipment is guaranteed for a specific date and time. When set, the FreightGuarantee property should be set. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Hold At Location: Indicates that the FedEx shipment is to be held at the destination FedEx location for pickup by the recipient. The request of this special service might affect the shipping rates and/or service availability. This service is not valid with the Hold Saturday service, or when RecipientAddressFlags is set to Residential (i.e., for residential delivery). When this service is requested HoldAtLocation is required to be provided in the request as well. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx International Economy Freight, and FedEx International Priority Freight.
• Inside Delivery: Indicates that inside delivery service is requested. In this case, FedEx may move shipments to positions beyond the adjacent loading area. In doing so, FedEx will assess an inside delivery charge in addition to all other applicable charges. The adjacent loading area is defined as a delivery site that is directly accessible from the curb and is no more than 50 feet inside the outermost door. FedEx will assess an inside delivery charge when shipment breakdown is necessary to fit a shipment through a doorway. FedEx does not provide piece count or piece verification when a breakdown of a freight shipment occurs at the delivery site. Contact FedEx for current surcharge rates. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx First Overnight Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Inside Pickup: Indicates that inside pickup service is requested. In this case, FedEx may move shipments from positions beyond the adjacent loading area. In doing so, FedEx will assess an inside pickup charge in addition to all other applicable charges. The adjacent loading area is defined as a pickup site that is directly accessible from the curb and is no more than 50 feet inside the outermost door. Contact FedEx for current surcharge rates. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx 3Day Freight, FedEx First Overnight Freight, FedEx Freight Economy, and FedEx Freight Priority.
• International Controlled Export Service Indicates that the Controlled Export service is requested. This is only applicable for international shipments. This might affect the shipping rates and/or service availability. When set, the IntlExportControlledExportType, IntlExportEntryNumber, IntlExportForeignTradeZoneCode, and IntlExportLicenseNumberExpiration properties should be set. Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.
• International Traffic in Arms Regulations Indicates that the Traffic in Arms Regulations service is requested. This is only applicable for international shipments. This might affect the shipping rates and/or service availability. When set, the IntlExportControlledExportType, IntlExportEntryNumber, IntlExportForeignTradeZoneCode, and IntlExportLicenseNumberExpiration properties should be set. Note that this is only valid for FedEx International Economy Freight and FedEx International Priority Freight.
• Liftgate Delivery: This indicates that the liftgate delivery service is requested for this shipment. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Liftgate Pickup: This indicates that the liftgate pickup service is requested for this shipment. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Poison: This indicates that the shipment contains poisonous materials. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Protection From Freezing: This indicates that the shipment should be protected from freezing. Note that this is only valid for FedEx Freight Economy and FedEx Freight Priority.
• Saturday Delivery: Requests the shipment be delivered on a Saturday. Saturday delivery service is available for an additional charge depending on the package service type and origin/destination pair. The rates and service availability depend on the ship date specified in the request. If the ship date falls on Thursday or Friday and Saturday delivery is desired, the ground option and some express option will not be valid. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx International Priority Freight, and FedEx Freight Priority.
• Saturday Pickup: Requests that the shipment be picked up on a Saturday. Saturday pickup service is available for an additional charge depending on the package service type and origin/destination pair. The rates and service availability depend on the ship date specified in the request. If the ship date falls on week day other than Saturday and Saturday pickup is desired, the ground option and some express option will not be valid. Note this is only valid for FedEx 1Day Freight, FedEx 2Day Freight, FedEx First Overnight Freight, FedEx International Priority Freight, FedEx Freight Economy, and FedEx Freight Priority.
• Top Load: This indicates that the pallets in this shipment should not have anything stacked on top of them. This might affect the shipping rates and/or service availability. Note this is only valid for FedEx Freight Economy, and FedEx Freight Priority.

Data Type

Long64

SSLAcceptServerCertEncoded Property (FedExFreightShip Component)

This is the certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEncoded Property (FedExFreightShip Component)

This is the certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (FedExFreightShip Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (FedExFreightShip Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (FedExFreightShip Component)

This is the type of certificate store for this certificate.

Syntax

__property TibxFedExFreightShipSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TibxFedExFreightShipSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (FedExFreightShip Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLProvider Property (FedExFreightShip Component)

This specifies the SSL/TLS implementation to use.

Syntax

__property TibxFedExFreightShipSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TibxFedExFreightShipSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

Additional Notes

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (FedExFreightShip Component)

This is the certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

SubmittedByCompany Property (FedExFreightShip Component)

Identifies the contact person's company name.

Syntax

__property String SubmittedByCompany = { read=FSubmittedByCompany, write=FSetSubmittedByCompany };

Default Value

""

Remarks

Identifies the contact person's company name. In a ship request, either SubmittedByFirstName and SubmittedByLastName or SubmittedByCompany are required to be provided.

Data Type

String

SubmittedByEmail Property (FedExFreightShip Component)

Identifies the contact person's email address.

Syntax

__property String SubmittedByEmail = { read=FSubmittedByEmail, write=FSetSubmittedByEmail };

Default Value

""

Remarks

Identifies the contact person's email address. Maximum length: 120.

Data Type

String

SubmittedByFax Property (FedExFreightShip Component)

Recipient's fax number.

Syntax

__property String SubmittedByFax = { read=FSubmittedByFax, write=FSetSubmittedByFax };

Default Value

""

Remarks

Recipient's fax number. The value of this property is optional. No format checking is done on international fax numbers.

Data Type

String

SubmittedByFirstName Property (FedExFreightShip Component)

Sender's first name.

Syntax

__property String SubmittedByFirstName = { read=FSubmittedByFirstName, write=FSetSubmittedByFirstName };

Default Value

""

Remarks

Sender's first name. The value of this property is required. Values for either SubmittedByFirstName and SubmittedByLastName or SubmittedByCompany must be sent.

Data Type

String

SubmittedByLastName Property (FedExFreightShip Component)

Person's last name.

Syntax

__property String SubmittedByLastName = { read=FSubmittedByLastName, write=FSetSubmittedByLastName };

Default Value

""

Remarks

Person's last name. The value of this property is required. Values for either SubmittedByFirstName and SubmittedByLastName or SubmittedByCompany must be sent. Maximum length: 45 characters for both names or company name.

Data Type

String

SubmittedByMiddleInitial Property (FedExFreightShip Component)

Middle initial.

Syntax

__property String SubmittedByMiddleInitial = { read=FSubmittedByMiddleInitial, write=FSetSubmittedByMiddleInitial };

Default Value

""

Remarks

Middle initial. The value of this property is optional.

Data Type

String

SubmittedByPhone Property (FedExFreightShip Component)

Identifies the contact person's phone number.

Syntax

__property String SubmittedByPhone = { read=FSubmittedByPhone, write=FSetSubmittedByPhone };

Default Value

""

Remarks

Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15.

Data Type

String

Timeout Property (FedExFreightShip Component)

A timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TotalCustomsValue Property (FedExFreightShip Component)

Total customs value for the shipment.

Syntax

__property String TotalCustomsValue = { read=FTotalCustomsValue, write=FSetTotalCustomsValue };

Default Value

"0.00"

Remarks

The TotalCustomsValue is required to be provided in an international shipment request. It represents the sum of the values of all commodities, and may include freight, miscellaneous, and insurance charges.

Format: Two explicit decimal positions (e.g. 100.00) with a maximum length of 17 including the decimal.

The following countries require a minimum customs value of $1 USD for all shipment, including document shipments:

Note this only applies when shipping internationally.

Data Type

String

TotalNetCharge Property (FedExFreightShip Component)

The total net charge applied to the whole shipment (specific to the AccountNumber ).

Syntax

__property String TotalNetCharge = { read=FTotalNetCharge };

Default Value

""

Remarks

In a MPS ship request, this represents the total net charge applied to all packages contained in the shipment. When the shipment consists of a single package, this is the same as PackageNetCharge at index=0.

This property is read-only.

Data Type

String

TotalWeight Property (FedExFreightShip Component)

Total shipment weight.

Syntax

__property String TotalWeight = { read=FTotalWeight, write=FSetTotalWeight };

Default Value

""

Remarks

Identifies the total weight of the shipment being conveyed to FedEx. This element is optional when submitting a ship request. It requires one explicit decimal position (i.e. N.N formatting).

Data Type

String

TrailerSize Property (FedExFreightShip Component)

The trailer size.

Syntax

__property TibxFedExFreightShipTrailerSizes TrailerSize = { read=FTrailerSize, write=FSetTrailerSize };

enum TibxFedExFreightShipTrailerSizes {
  ts28FT=0,
  ts48FT=1,
  ts53FT=2
};

Default Value

ts28FT

Remarks

The size of the trailer needed when calling SchedulePickup.

Data Type

Integer

TransitTime Property (FedExFreightShip Component)

Expected number of days in transit from pickup to delivery.

Syntax

__property String TransitTime = { read=FTransitTime };

Default Value

""

Remarks

This is an estimate only. When either the GetPackageLabel or GetShipmentLabels method is called, the DeliveryDate will be returned in the server reply. For international shipments, this information is a limited to a number of international countries and it depends on the customs clearance times.

Possible values are: ONE_DAY, TWO_DAYS, THREE_DAYS, FOUR_DAYS, FIVE_DAYS, SIX_DAYS, SEVEN_DAYS, EIGHT_DAYS, NINE_DAYS, and UNKNOWN.

This property is read-only and not available at design time.

Data Type

String

TruckType Property (FedExFreightShip Component)

The type of truck.

Syntax

__property TibxFedExFreightShipTruckTypes TruckType = { read=FTruckType, write=FSetTruckType };

enum TibxFedExFreightShipTruckTypes {
  ttDropTrailerAgreement=0,
  ttLiftgate=1,
  ttTractorTrailerAccess=2
};

Default Value

ttDropTrailerAgreement

Remarks

This indicates the type of truck needed when SchedulePickup is called.

Data Type

Integer

UploadDocumentDetailCount Property (FedExFreightShip Component)

The number of records in the UploadDocumentDetail arrays.

Syntax

__property int UploadDocumentDetailCount = { read=FUploadDocumentDetailCount, write=FSetUploadDocumentDetailCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• UploadDocumentDetailDocType
• UploadDocumentDetailDocumentId
• UploadDocumentDetailFileContent
• UploadDocumentDetailLocalFileName
• UploadDocumentDetailShipDocument
• UploadDocumentDetailUploadFileName

The array indices start at 0 and end at UploadDocumentDetailCount - 1.

This property is not available at design time.

Data Type

Integer

UploadDocumentDetailDocType Property (FedExFreightShip Component)

This specifies the document type of the document being uploaded.

Syntax

__property TibxFedExFreightShipUploadDocumentDetailDocTypes UploadDocumentDetailDocType[int UploadDocumentDetailIndex] = { read=FUploadDocumentDetailDocType, write=FSetUploadDocumentDetailDocType };

enum TibxFedExFreightShipUploadDocumentDetailDocTypes {
  fdtCommercialInvoice=0,
  fdtCertificateOfOrigin=1,
  fdtNAFTACertificateOfOrigin=2,
  fdtProFormaInvoice=3,
  fdtOther=4
};

Default Value

fdtCommercialInvoice

Remarks

This specifies the document type of the document being uploaded.

The valid values are as follows:

The UploadDocumentDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadDocumentDetailCount property.

This property is not available at design time.

Data Type

Integer

UploadDocumentDetailDocumentId Property (FedExFreightShip Component)

Upon a successful request, this is returned in the server reply for each uploaded document.

Syntax

__property String UploadDocumentDetailDocumentId[int UploadDocumentDetailIndex] = { read=FUploadDocumentDetailDocumentId };

Default Value

""

Remarks

Upon a successful request, this is returned in the server reply for each uploaded document.

The UploadDocumentDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadDocumentDetailCount property.

This property is read-only and not available at design time.

Data Type

String

UploadDocumentDetailFileContent Property (FedExFreightShip Component)

If LocalFileName is not set, this will be used to specify the contents of the file to be uploaded.

Syntax

__property String UploadDocumentDetailFileContent[int UploadDocumentDetailIndex] = { read=FUploadDocumentDetailFileContent, write=FSetUploadDocumentDetailFileContent };

Default Value

""

Remarks

If UploadDocumentDetailLocalFileName is not set, this will be used to specify the contents of the file to be uploaded.

The UploadDocumentDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadDocumentDetailCount property.

This property is not available at design time.

Data Type

String

UploadDocumentDetailLocalFileName Property (FedExFreightShip Component)

This contains the path to the file on the local system.

Syntax

__property String UploadDocumentDetailLocalFileName[int UploadDocumentDetailIndex] = { read=FUploadDocumentDetailLocalFileName, write=FSetUploadDocumentDetailLocalFileName };

Default Value

""

Remarks

This contains the path to the file on the local system. If this is not set, UploadDocumentDetailFileContent will be used instead.

The UploadDocumentDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadDocumentDetailCount property.

This property is not available at design time.

Data Type

String

UploadDocumentDetailShipDocument Property (FedExFreightShip Component)

This indicates if the document will be sent in a subsequent call to GetShipmentLabels or GetPackageLabel .

Syntax

__property bool UploadDocumentDetailShipDocument[int UploadDocumentDetailIndex] = { read=FUploadDocumentDetailShipDocument, write=FSetUploadDocumentDetailShipDocument };

Default Value

false

Remarks

This indicates if the document will be sent in a subsequent call to GetShipmentLabels or GetPackageLabel.

The UploadDocumentDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadDocumentDetailCount property.

This property is not available at design time.

Data Type

Boolean

UploadDocumentDetailUploadFileName Property (FedExFreightShip Component)

This contains the name of file to be uploaded to FedEx.

Syntax

__property String UploadDocumentDetailUploadFileName[int UploadDocumentDetailIndex] = { read=FUploadDocumentDetailUploadFileName, write=FSetUploadDocumentDetailUploadFileName };

Default Value

""

Remarks

This contains the name of file to be uploaded to FedEx.

The UploadDocumentDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadDocumentDetailCount property.

This property is not available at design time.

Data Type

String

UploadImageDetailCount Property (FedExFreightShip Component)

The number of records in the UploadImageDetail arrays.

Syntax

__property int UploadImageDetailCount = { read=FUploadImageDetailCount, write=FSetUploadImageDetailCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• UploadImageDetailFileContent
• UploadImageDetailImageIndex
• UploadImageDetailImageType
• UploadImageDetailLocalFileName
• UploadImageDetailReference
• UploadImageDetailStatus
• UploadImageDetailUploadFileName

The array indices start at 0 and end at UploadImageDetailCount - 1.

This property is not available at design time.

Data Type

Integer

UploadImageDetailFileContent Property (FedExFreightShip Component)

If LocalFileName is not set, this will be used to specify the contents of the file to be uploaded.

Syntax

__property String UploadImageDetailFileContent[int UploadImageDetailIndex] = { read=FUploadImageDetailFileContent, write=FSetUploadImageDetailFileContent };

Default Value

""

Remarks

If UploadImageDetailLocalFileName is not set, this will be used to specify the contents of the file to be uploaded.

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is not available at design time.

Data Type

String

UploadImageDetailImageIndex Property (FedExFreightShip Component)

Specifies the index for the uploaded image.

Syntax

__property String UploadImageDetailImageIndex[int UploadImageDetailIndex] = { read=FUploadImageDetailImageIndex, write=FSetUploadImageDetailImageIndex };

Default Value

""

Remarks

Specifies the index for the uploaded image. Valid Values are: IMAGE_1, IMAGE_2, IMAGE_3, IMAGE_4, IMAGE_5.

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is not available at design time.

Data Type

String

UploadImageDetailImageType Property (FedExFreightShip Component)

This specifies the image type of the image being uploaded.

Syntax

__property TibxFedExFreightShipUploadImageDetailImageTypes UploadImageDetailImageType[int UploadImageDetailIndex] = { read=FUploadImageDetailImageType, write=FSetUploadImageDetailImageType };

enum TibxFedExFreightShipUploadImageDetailImageTypes {
  uitSignature=0,
  uitLetterhead=1
};

Default Value

uitSignature

Remarks

This specifies the image type of the image being uploaded.

The valid values are as follows:

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is not available at design time.

Data Type

Integer

UploadImageDetailLocalFileName Property (FedExFreightShip Component)

This contains the path to the file on the local system.

Syntax

__property String UploadImageDetailLocalFileName[int UploadImageDetailIndex] = { read=FUploadImageDetailLocalFileName, write=FSetUploadImageDetailLocalFileName };

Default Value

""

Remarks

This contains the path to the file on the local system. If this is not set, UploadImageDetailFileContent will be used instead.

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is not available at design time.

Data Type

String

UploadImageDetailReference Property (FedExFreightShip Component)

This is an optional property to specify the customer reference for the image to be uploaded (Example: SIGNA202403).

Syntax

__property String UploadImageDetailReference[int UploadImageDetailIndex] = { read=FUploadImageDetailReference, write=FSetUploadImageDetailReference };

Default Value

""

Remarks

This is an optional field to specify the customer reference for the image to be uploaded (Example: SIGNA202403).

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is not available at design time.

Data Type

String

UploadImageDetailStatus Property (FedExFreightShip Component)

Upon a successful request, this is returned in the server reply for each uploaded image.

Syntax

__property String UploadImageDetailStatus[int UploadImageDetailIndex] = { read=FUploadImageDetailStatus };

Default Value

""

Remarks

Upon a successful request, this is returned in the server reply for each uploaded image.

Possible values are:

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is read-only and not available at design time.

Data Type

String

UploadImageDetailUploadFileName Property (FedExFreightShip Component)

This contains the name of file to be uploaded to FedEx (Example: Signature.

Syntax

__property String UploadImageDetailUploadFileName[int UploadImageDetailIndex] = { read=FUploadImageDetailUploadFileName, write=FSetUploadImageDetailUploadFileName };

Default Value

""

Remarks

This contains the name of file to be uploaded to FedEx (Example: Signature.PNG).

The UploadImageDetailIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UploadImageDetailCount property.

This property is not available at design time.

Data Type

String

CancelPackage Method (FedExFreightShip Component)

Cancels a single package shipment by deleting it from the shipping log.

Syntax

void __fastcall CancelPackage(String TrackingNumber);

Remarks

Cancels FedEx Express and Ground package that have not already been tendered to FedEx.

The TrackingNumber parameter, that identifies the package to be canceled and deleted from the shipping log, is the PackageTrackingNumber assigned to the package by FedEx server when either the GetPackageLabel or the GetShipmentLabels method was called.

The following properties can be set prior to calling this method:

• FedExAccountNumber (required)
• SenderCountryCode

To check the status of your cancel request the CancelledShipment config should be inspected.

CancelPickup Method (FedExFreightShip Component)

Cancels a scheduled Pickup request.

Syntax

String __fastcall CancelPickup(String ConfirmationNumber, String Reason);

Remarks

When the CancelPickup method is called, the exact data from the original SchedulePickup request must be entered.

You must enter the following information:

• ConfirmationNumber (required)
• Reason (required)
• FedExAccountNumber (required)
• SenderContact (required)
• ShipDate (required)
• SpecialInstructions (optional)

If the information entered is valid (matches the existing record and is within the time frames available for cancellation), this method will return with no error. The return value for this method is a string containing a message from FedEx about the request to cancel the pickup, if one exists.

CancelShipment Method (FedExFreightShip Component)

Cancels all packages within the shipment.

Syntax

void __fastcall CancelShipment(String TrackingNumber);

Remarks

Cancels FedEx Express and Ground shipments that have not already been tendered to FedEx.

The TrackingNumber parameter, that identifies the shipment to be canceled and deleted from the shipping log, is assigned by FedEx server when either the GetPackageLabel or GetShipmentLabels method was called.

The following properties can be set prior to calling this method:

• FedExAccountNumber (required)
• SenderCountryCode

To check the status of your cancel request the CancelledShipment config should be inspected.

Config Method (FedExFreightShip Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

GetPackageLabel Method (FedExFreightShip Component)

Generates a shipping label for the specified package.

Syntax

void __fastcall GetPackageLabel(int Index);

Remarks

When this method is called, the following properties must have been set:

• FedExAuthorizationToken (required)
• FedExServer (optional)
• FedExAccountNumber (required)
• ShipDate (required)
• ShipTime (optional)
• ServiceType (required)
• PackageType (required)
• TotalWeight (optional; applicable to international shipments only)
• WeightUnit (required; defaults to LB)
• SizeUnit (required; defaults to IN)
• InsuredValue (optional)
• SenderContact (required)
• SenderAddress (required)
• RecipientContact (required)
• RecipientAddress (required)
• Payor (required)
• ShipmentSpecialServices (optional)
• DutiesPayor (required for international shipments only)
• Packages (required)
• LabelImageType (required)
• CommercialInvoice (required if Documents is set to False; applicable to international shipments only)
• Commodities (required, regardless of the Documents value; applicable to international shipments only)
• ClearanceBrokerageType (optional)
• BrokerType (optional)
• BrokerContact (optional)
• BrokerAddress (optional)
• Documents (optional)
• BlockVisibility (optional)

In express international shipments, at least one commodity line item has to be included in the request. However, the customer has to print out its own Commercial Invoice (a required document for international shipments). The commodity information you provide in your transaction is forwarded to customs electronically at the time the shipping label is generated. Commodity information can be provided via the Commodities (required, regardless of the Documents value).

This method fills in the following properties:

• PackageTrackingNumber for each package included in the shipment;
• PackageShippingLabel for each package included in the shipment;
• PackageNetCharge for each package included in the shipment;
• PackageBaseCharge for each package included in the shipment;
• PackageTotalDiscount for each package included in the shipment;
• PackageTotalSurcharges for each package included in the shipment;
• DeliveryDate (applicable to the whole shipment);
• TotalNetCharge (applicable to the whole shipment);

To print out the PackageShippingLabel, you can save it to the PackageShippingLabelFile file in LabelImageType format.

GetShipmentLabels Method (FedExFreightShip Component)

Generates a shipping label for all packages in the shipment.

Syntax

void __fastcall GetShipmentLabels();

Remarks

When this method is called, the following properties must have been set:

• FedExAuthorizationToken (required)
• FedExServer (optional)
• FedExAccountNumber (required)
• ShipDate (required)
• ShipTime (optional)
• ServiceType (required)
• PackageType (required)
• TotalWeight (optional; applicable to international shipments only)
• WeightUnit (required; defaults to LB)
• SizeUnit (required; defaults to IN)
• InsuredValue (optional)
• SenderContact (required)
• SenderAddress (required)
• RecipientContact (required)
• RecipientAddress (required)
• Payor (required)
• ShipmentSpecialServices (optional)
• DutiesPayor (required for international shipments only)
• Packages (required)
• LabelImageType (required)
• CommercialInvoice (required if Documents is set to False; applicable to international shipments only)
• Commodities (required, regardless of the Documents value; applicable to international shipments only)
• ClearanceBrokerageType (optional)
• BrokerType (optional)
• BrokerContact (optional)
• BrokerAddress (optional)
• Documents (optional)
• BlockVisibility (optional)

In express international shipments, at least one commodity line item has to be included in the request. However, the customer has to print out its own Commercial Invoice (a required document for international shipments). The commodity information you provide in your transaction is forwarded to customs electronically at the time the shipping label is generated. Commodity information can be provided via the Commodities (required, regardless of the Documents value).

This method fills in the following properties:

• PackageTrackingNumber for each package included in the shipment;
• PackageShippingLabel for each package included in the shipment;
• PackageNetCharge for each package included in the shipment;
• PackageBaseCharge for each package included in the shipment;
• PackageTotalDiscount for each package included in the shipment;
• PackageTotalSurcharges for each package included in the shipment;
• DeliveryDate (applicable to the whole shipment);
• TotalNetCharge (applicable to the whole shipment);

To print out the PackageShippingLabel, you can save it to the PackageShippingLabelFile file in LabelImageType format.

PickupAvailability Method (FedExFreightShip Component)

Checks the availability of the courier dispatch service for the given address.

Syntax

void __fastcall PickupAvailability();

Remarks

The PickupAvailability method requires the values for the following properties:

• ServiceType (required)
• CarrierType (required)
• SenderAddress1 (required)
• SenderCity (optional)
• SenderState (optional)
• SenderZipCode (required)
• SenderCountryCode (required)
• ShipDate (optional)
• ShipTime (optional)
• CompanyCloseTime (optional)
• PickupType (optional)
• Packages (optional)
• TotalWeight (optional)

Valid values for CarrierType are FDXE (FedEx Express) or FDXG (FedEx Ground).

The Packages property may optionally be populated with dimensions such as PackageLength, PackageWidth, and PackageHeight.

If the Carrier Pickup service is available to the supplied address, the following properties will be returned. These properties indicate the earliest available pickup date and the carrier that will be picking up your packages:

• ShipDate
• ShipTime
• CarrierType
• CutoffTime
• AccessTime (Example: 'PT1H0M' means Pickup Time is 1 Hour and 0 Minutes)

The PickupAvailability method requires the values for the following properties:

• ServiceType (required)
• SenderAddress1 (required)
• SenderCity (optional)
• SenderState (optional)
• SenderZipCode (required)
• SenderCountryCode (required)
• ShipDate (optional)
• ShipTime (optional)
• CompanyCloseTime (optional)
• Packages (optional)
• TotalWeight (optional)

Valid values for CarrierType are FDXE (FedEx Express) or FDXG (FedEx Ground).

The Packages property may optionally be populated with dimensions such as PackageLength, PackageWidth, and PackageHeight.

If the Carrier Pickup service is available to the supplied address, the following properties will be returned. These properties indicate the earliest available pickup date and the carrier that will be picking up your packages:

• CarrierType
• CutoffTime
• AccessTime (Example: 'PT1H0M' means Pickup Time is 1 Hour and 0 Minutes)

ReprintDocuments Method (FedExFreightShip Component)

Reprints the requested document.

Syntax

void __fastcall ReprintDocuments();

Remarks

When called this will request the document type specified in CloseReportType for the specified.

Reset Method (FedExFreightShip Component)

Resets the internal state of the component and all properties to their default values.

Syntax

void __fastcall Reset();

Remarks

The Reset method does not have any parameters and does not return any value.

SchedulePickup Method (FedExFreightShip Component)

This method schedules a courier pickup.

Syntax

String __fastcall SchedulePickup();

Remarks

Schedules a courier pickup and returns a confirmation number for the scheduled pickup.

The following properties are applicable:

• ApprovedByCompany (optional)
• ApprovedByEmail (optional)
• ApprovedByFax (optional)
• ApprovedByFirstName (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• ApprovedByLastName (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• ApprovedByMiddleInitial (optional)
• ApprovedByPhone (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• BookingNumber (required when ServiceType is set to stFedEx1DayFreight, stFedExInternationalPriorityFreight, or stFedExInternationalEconomyFreight)
• CarrierType (required, should be set to ctFXFR only if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority, otherwise should be set to ctFDXE.)
• CommodityFreightPackagingType (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• CommodityWeight (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• CommodityHandlingUnits (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• CommodityPONumber (optional, only applies if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• CompanyCloseTime (required)
• PackageLocation (required)
• Packages (optional)
• PackageCount (required if Packages are not provided)
• PickupPaymentType (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• RecipientAddress1 (optional)
• RecipientAddress2 (optional)
• RecipientCity(required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• RecipientState(required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• RecipientZipCode(required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• RecipientCountryCode (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• SenderAddress1 (required when UseAccountAddress is false)
• SenderAddress2 (optional)
• SenderCity (required when UseAccountAddress is false)
• SenderState (required when UseAccountAddress is false)
• SenderZipCode (required when UseAccountAddress is false)
• SenderCountryCode (required when UseAccountAddress is false)
• SenderCompany (required when UseAccountAddress is false)
• SenderEmail (optional)
• SenderFax (optional)
• SenderFirstName (required when UseAccountAddress is false)
• SenderLastName (required when UseAccountAddress is false)
• SenderMiddleInitial (optional)
• SenderPhone (required when UseAccountAddress is false)
• ServiceType (required)
• ShipDate (required)
• ShipTime (optional)
• SpecialInstructions (optional)
• SubmittedByCompany (optional)
• SubmittedByEmail (optional)
• SubmittedByFax (optional)
• SubmittedByFirstName (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• SubmittedByLastName (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• SubmittedByMiddleInitial (optional)
• SubmittedByPhone (required if ServiceType is set to stFedExFreightEconomy or stFedExFreightPriority)
• TotalWeight (required)
• TruckType (required when ServiceType is set to an Express Freight type, such as stFedEx1DayFreight, stFedEx2DayFreight, stFedEx3DayFreight, stFedExFirstFreight, stFedExInternationalPriorityFreight, or stFedExInternationalEconomyFreight)
• TrailerSize (required when ServiceType is set to an Express Freight type, such as stFedEx1DayFreight, stFedEx2DayFreight, stFedEx3DayFreight, stFedExFirstFreight, stFedExInternationalPriorityFreight, or stFedExInternationalEconomyFreight)
• UseAccountAddress (optional)

If the courier pickup service is available for the supplied address, the confirmation number will be returned by this method. The Location property will also be populated.

Prior to making a SchedulePickup call, it is recommended to first call the PickupAvailability method to confirm that the pickup service is available.

UploadDocuments Method (FedExFreightShip Component)

Uploads documents to FedEx.

Syntax

void __fastcall UploadDocuments();

Remarks

When called this will upload any documents specified in UploadDocumentDetails to FedEx.

UploadImages Method (FedExFreightShip Component)

Uploads images to FedEx.

Syntax

void __fastcall UploadImages();

Remarks

When called this will upload any images specified in UploadImageDetails to FedEx.

Error Event (FedExFreightShip Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TibxFedExFreightShipErrorEventParams;
typedef void __fastcall (__closure *TibxFedExFreightShipErrorEvent)(System::TObject* Sender, TibxFedExFreightShipErrorEventParams *e);
__property TibxFedExFreightShipErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Notification Event (FedExFreightShip Component)

Notification returned by the server upon successful request (if applicable).

Syntax

typedef struct {
  String Message;
} TibxFedExFreightShipNotificationEventParams;
typedef void __fastcall (__closure *TibxFedExFreightShipNotificationEvent)(System::TObject* Sender, TibxFedExFreightShipNotificationEventParams *e);
__property TibxFedExFreightShipNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

When sending a request, the server may return with a successful reply or an error. However, even when a transaction is successful, a warning or a note might still be returned by the server. In such cases, the Notification event is fired.

Notifications returned through this event are non-fatal and shipments will still be processes, labels will still be printable, rates are still returned, etc. These notifications should be treated as informational only.

SSLServerAuthentication Event (FedExFreightShip Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TibxFedExFreightShipSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TibxFedExFreightShipSSLServerAuthenticationEvent)(System::TObject* Sender, TibxFedExFreightShipSSLServerAuthenticationEventParams *e);
__property TibxFedExFreightShipSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (FedExFreightShip Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TibxFedExFreightShipSSLStatusEventParams;
typedef void __fastcall (__closure *TibxFedExFreightShipSSLStatusEvent)(System::TObject* Sender, TibxFedExFreightShipSSLStatusEventParams *e);
__property TibxFedExFreightShipSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Config Settings (FedExFreightShip Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

FedExFreightShip Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

Socket Config Settings

Base Config Settings

Trappable Errors (FedExFreightShip Component)

FedExFreightShip Errors

	301   Operation interrupted (or timeout).
	432   Invalid index.
	527   Server Error Response.
	528   Property set with invalid data.

The component may also return one of the following error codes, which are inherited from other components.