UPSFreightShip Class
Properties Methods Events Config Settings Errors
Provides UPS Freight Shipment service.
Syntax
dshippingsdk.Upsfreightship
Remarks
The UPSFreightShip class allows labels and documents to be generated for a freight shipment. To use the class, populate Documents to specify the type of documents requested. Specify the sender, recipient, commodity and UPS account information before calling GetShipmentDocuments. For instance:
component.UPSAccount.Server = "https://wwwcie.ups.com/webservices/FreightShip";
component.UPSAccount.AccessKey = "Your Access Key";
component.UPSAccount.UserId = "User Id";
component.UPSAccount.Password = "Password";
component.UPSAccount.AccountNumber = "000000";
component.SenderContact.Company = "Developer Test 1";
component.SenderContact.Phone = "884530171";
component.SenderAddress.Address1 = "101 Developer Way";
component.SenderAddress.City = "Richmond";
component.SenderAddress.State = "VA";
component.SenderAddress.ZipCode = "23224";
component.SenderAddress.CountryCode = "US";
component.RecipientContact.Company = "Consignee Test 1";
component.RecipientAddress.Address1 = "1000 Consignee Street";
component.RecipientAddress.City = "Allanton";
component.RecipientAddress.State = "MO";
component.RecipientAddress.ZipCode = "63001";
component.RecipientAddress.CountryCode = "US";
component.Payor.PayorType = TPayorTypes.ptSender;
component.HandlingUnit = "SKD:1";
CommodityDetail item = new CommodityDetail();
item.Description = "LCD TVS";
item.FreightClass = "77.5";
item.Weight = "150";
item.FreightNMFC = "132680";
item.FreightNMFCSub = "02";
item.NumberOfPieces = 20;
item.Value = "100";
component.Commodities.Add(item);
DocumentInfo label = new DocumentInfo();
label.FileName = "TestLabel.pdf";
label.PrintFormat = TFreightPrintFormats.fpfLaser;
label.PrintSize = TFreightPrintSizes.fpsSize8X11;
label.DocumentType = TFreightTypeCodes.ftcLabel;
component.Documents.Add(label);
component.GetShipmentDocuments();
Console.WriteLine("Total Charge: " + component.TotalCharge);
for (int i = 0; i < component.Charges.Count; i++)
{
Console.WriteLine(component.Charges[i].ChargeType + ": " + component.Charges[i].Value);
}
Console.WriteLine("Billable Weight: " + component.BillableWeight);
Console.WriteLine("BOLID: " + component.BOLID);
Console.WriteLine("Shipment Number: " + component.ShipmentNumber);
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
BillableWeight | Represents the billable weight associated with the shipment. |
BOLID | The retrieval key for the stored BOL (Bill of Lading). |
Charges | Collection of shipment charges. |
CODPayorType | The type of payment that will be used for the COD payment. |
CODRemitToAddress | Specifies the contact address detail of the contact to whom to send COD funds. If not specified, sender address will be used. |
CODRemitToContact | Specifies the contact detail of the contact to whom to send COD funds. If not specified, funds will be sent to the sender. |
CODTotalAmount | The total amount of additional fees. |
CODType | The code that indicates the type of funds that will be used for the COD payment. |
Commodities | Collection of commodity items of the shipment. |
DimensionalWeight | Represents the dimensional weight associated with the shipment. |
Documents | Collection of information about each of the requested documents. |
Firewall | A set of properties related to firewall access. |
HandlingUnit | Describe the Handling Units (Movable Pieces) in this Shipment. |
HazMatContactName | Identifies the contact name for questions of the hazardous materials. Required when any commodity is marked as a hazardous material. |
HazMatContactPhone | Identifies the contact phone for questions of the hazardous materials. Required when any commodity is marked as a hazardous material. |
Notify | Collection of e-mail notifications to be sent. |
OverSeasLeg | Identifies the OverSeasLeg detail. Required when origin or destination is Hawaii, Alaska, and Puerto Rico. |
Payor | Identifies the payor of transportation charges for the shipment. |
PickupRequester | Identifies the pickup requester's contact info. Used with the EarliestPickupTime and LatestPickupTime configuration settings. |
Proxy | This property includes a set of properties related to proxy access. |
RecipientAddress | Identifies the recipient's address. |
RecipientContact | Identifies the recipient's contact info. |
References | Collection of reference numbers for the shipment. |
SenderAddress | Identifies the sender's address. |
SenderContact | Identifies the sender's contact info. |
ServiceType | The service selected for the shipment. |
ShipmentNumber | The shipment number assigned to the shipment. |
SSLAcceptServerCert | Instructs the class to unconditionally accept the server certificate that matches the supplied certificate. |
SSLCert | The certificate to be used during SSL negotiation. |
SSLProvider | This specifies the SSL/TLS implementation to use. |
SSLServerCert | The server certificate for the last established connection. |
Timeout | A timeout for the class. |
TotalCharge | Represents the total shipment charge. |
UPSAccount | Login information for UPS. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
GetShipmentDocuments | Generates a shipping label using one of domestic UPS services. |
Reset | Resets the internal state of the class and all properties to their default values. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
Error | Information about errors during data delivery. |
Notification | Notification returned by the server upon successful request (if applicable). |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Shows the progress of the secure connection. |
Config Settings
The following is a list of config settings for the class with short descriptions. Click on the links for further details.
AlternateDeliveryAddress | Used to specify an XML or SOAP aggregate for Hold for Pickup or Delivery at UPS Access Points. |
BarCodeReference | Determines whether the reference number's value will be bar coded on the shipping label. |
CurrencyCode | The currency code associated with the monetary values present in the request. |
DeliveryInstructions | Specifies the delivery instructions for your shipment. |
DeliveryOptions | Value-Added Freight Delivery Services. |
HandlingCharge | Add a handling charge to your Shipment. |
HandlingInstructions | Specifies the handling instructions for your shipment. |
HasXPath | Determines whether a specific element exists in the document. |
IncludeNegotiatedRates | Whether to include the NegotiatedRatesIndicator in the request. |
ItemizedChargesCode[i] | The Accesorial/Surcharge code of the itemized charge. |
ItemizedChargesCount | The count of itemized charges. |
ItemizedChargesCurrencyCode[i] | The currency used for the charge. |
ItemizedChargesMonetaryValue[i] | The amount being charged. |
ItemizedChargesSubType[i] | The subtype of the itemized charge. |
NotificationDialect | Used to specify the dialect for Alternate Delivery Location notifications and UAP Shipper notifications. |
NotificationLanguage | Used to specify the language for Alternate Delivery Location notifications and UAP Shipper notifications. |
Overwrite | Determines whether files will be overwritten. |
PickupEarliestTime | The earliest time a shipment can be picked up. |
PickupInstructions | Specifies the pickup instructions for your shipment. |
PickupLatestTime | The latest time a shipment can be picked up. |
PickupOptions | Value-Added Freight Pickup Services. |
PickupRequestConfirmationNumber | The confirmation number returned on a successful pickup request. |
PiecesToSort | The number of pieces to sort and segregate. |
RawRequest | Contains the complete request sent to the Server. |
RawResponse | Contains the complete response returned by the Server. |
RecipientAddress3 | Contains line three details for the Recipient Address. |
SenderAddress3 | Contains line three details for the Sender Address. |
ShipDate | The date the user requests UPS to pickup the package from the origin. |
ShipmentIndicationType | Whether shipment is Hold For Pickup or Delivery at UPS Access Points. |
SpecialInstructions | Specifies the special instructions for your shipment. |
SubVersion | UPS SubVersion. |
TaxInformationIndicator | Controls whether to send a TaxInformationIndicator. |
UndeliverableEmail | The emails would be sent to this address if any notification is undeliverable. |
UseSOAP | Whether or not to use UPS' webservices. |
Warning | Warning message returned by the server. |
WeightUnit | Weight unit. |
XAttrCount | The number of records in the XAttr arrays. |
XAttrName[i] | The name of the indexed attribute. |
XAttrValue[i] | The value of the indexed attribute. |
XChildCount | The number of records in the XChild arrays. |
XChildElement[i] | The name of the indexed child element. |
XChildText[i] | The text of the indexed child element. |
XElement | The name of the current element. |
XParent | The parent of the current element. |
XPath | Used to set the XPath within the response from the server. |
XText | The text of the current element. |
AcceptEncoding | Used to tell the server which types of content encodings the client supports. |
AllowHTTPCompression | This property enables HTTP compression for receiving data. |
AllowHTTPFallback | Whether HTTP/2 connections are permitted to fallback to HTTP/1.1. |
AllowNTLMFallback | Whether to allow fallback from Negotiate to NTLM when authenticating. |
Append | Whether to append data to LocalFile. |
Authorization | The Authorization string to be sent to the server. |
BytesTransferred | Contains the number of bytes transferred in the response data. |
ChunkSize | Specifies the chunk size in bytes when using chunked encoding. |
CompressHTTPRequest | Set to true to compress the body of a PUT or POST request. |
EncodeURL | If set to True the URL will be encoded by the class. |
FollowRedirects | Determines what happens when the server issues a redirect. |
GetOn302Redirect | If set to True the class will perform a GET on the new location. |
HTTP2HeadersWithoutIndexing | HTTP2 headers that should not update the dynamic header table with incremental indexing. |
HTTPVersion | The version of HTTP used by the class. |
IfModifiedSince | A date determining the maximum age of the desired document. |
KeepAlive | Determines whether the HTTP connection is closed after completion of the request. |
KerberosSPN | The Service Principal Name for the Kerberos Domain Controller. |
LogLevel | The level of detail that is logged. |
MaxHeaders | Instructs class to save the amount of headers specified that are returned by the server after a Header event has been fired. |
MaxHTTPCookies | Instructs class to save the amount of cookies specified that are returned by the server when a SetCookie event is fired. |
MaxRedirectAttempts | Limits the number of redirects that are followed in a request. |
NegotiatedHTTPVersion | The negotiated HTTP version. |
OtherHeaders | Other headers as determined by the user (optional). |
ProxyAuthorization | The authorization string to be sent to the proxy server. |
ProxyAuthScheme | The authorization scheme to be used for the proxy. |
ProxyPassword | A password if authentication is to be used for the proxy. |
ProxyPort | Port for the proxy server (default 80). |
ProxyServer | Name or IP address of a proxy server (optional). |
ProxyUser | A user name if authentication is to be used for the proxy. |
SentHeaders | The full set of headers as sent by the client. |
StatusLine | The first line of the last response from the server. |
TransferredData | The contents of the last response from the server. |
TransferredDataLimit | The maximum number of incoming bytes to be stored by the class. |
TransferredHeaders | The full set of headers as received from the server. |
TransferredRequest | The full request as sent by the client. |
UseChunkedEncoding | Enables or Disables HTTP chunked encoding for transfers. |
UseIDNs | Whether to encode hostnames to internationalized domain names. |
UsePlatformDeflate | Whether to use the platform implementation to decompress compressed responses. |
UsePlatformHTTPClient | Whether or not to use the platform HTTP client. |
UseProxyAutoConfigURL | Whether to use a Proxy auto-config file when attempting a connection. |
UserAgent | Information about the user agent (browser). |
CloseStreamAfterTransfer | If true, the class will close the upload or download stream after the transfer. |
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallListener | If true, the class binds to a SOCKS firewall as a server (TCPClient only). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the class binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
UseNTLMv2 | Whether to use NTLM V2. |
LogSSLPackets | Controls whether SSL packets are logged when using the internal security API. |
ReuseSSLSession | Determines if the SSL session is reused. |
SSLCACerts | A newline separated list of CA certificate to use during SSL client authentication. |
SSLCheckCRL | Whether to check the Certificate Revocation List for the server certificate. |
SSLCheckOCSP | Whether to use OCSP to check the status of the server certificate. |
SSLCipherStrength | The minimum cipher strength used for bulk encryption. |
SSLContextProtocol | The protocol used when getting an SSLContext instance. |
SSLEnabledCipherSuites | The cipher suite to be used in an SSL negotiation. |
SSLEnabledProtocols | Used to enable/disable the supported security protocols. |
SSLEnableRenegotiation | Whether the renegotiation_info SSL extension is supported. |
SSLIncludeCertChain | Whether the entire certificate chain is included in the SSLServerAuthentication event. |
SSLKeyLogFile | The location of a file where per-session secrets are written for debugging purposes. |
SSLNegotiatedCipher | Returns the negotiated ciphersuite. |
SSLNegotiatedCipherStrength | Returns the negotiated ciphersuite strength. |
SSLNegotiatedCipherSuite | Returns the negotiated ciphersuite. |
SSLNegotiatedKeyExchange | Returns the negotiated key exchange algorithm. |
SSLNegotiatedKeyExchangeStrength | Returns the negotiated key exchange algorithm strength. |
SSLNegotiatedVersion | Returns the negotiated protocol version. |
SSLServerCACerts | A newline separated list of CA certificate to use during SSL server certificate validation. |
SSLTrustManagerFactoryAlgorithm | The algorithm to be used to create a TrustManager through TrustManagerFactory. |
TLS12SignatureAlgorithms | Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal. |
TLS12SupportedGroups | The supported groups for ECC. |
TLS13KeyShareGroups | The groups for which to pregenerate key shares. |
TLS13SignatureAlgorithms | The allowed certificate signature algorithms. |
TLS13SupportedGroups | The supported groups for (EC)DHE key exchange. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
BuildInfo | Information about the product's build. |
GUIAvailable | Tells the class whether or not a message loop is available for processing events. |
LicenseInfo | Information about the current license. |
MaskSensitive | Whether sensitive data is masked in log messages. |
UseDaemonThreads | Whether threads created by the class are daemon threads. |
UseInternalSecurityAPI | Tells the class whether or not to use the system security libraries or an internal implementation. |
BillableWeight Property (UPSFreightShip Class)
Represents the billable weight associated with the shipment.
Syntax
public String getBillableWeight();
Default Value
""
Remarks
This property is read-only.
BOLID Property (UPSFreightShip Class)
The retrieval key for the stored BOL (Bill of Lading).
Syntax
public String getBOLID();
Default Value
""
Remarks
This property holds the retrieval key for the stored BOL (Bill of Lading) as returned by the server.
This property is read-only.
Charges Property (UPSFreightShip Class)
Collection of shipment charges.
Syntax
public ChargeDetailList getCharges(); public void setCharges(ChargeDetailList charges);
Remarks
Freight shipments may include various charges. This collection holds information about each of the charges applied to this shipment.
CODPayorType Property (UPSFreightShip Class)
The type of payment that will be used for the COD payment.
Syntax
public int getCODPayorType(); public void setCODPayorType(int CODPayorType); Enumerated values: public final static int fcodptCollect = 0; public final static int fcodptPrepaid = 1;
Default Value
0
Remarks
This property specifies the type of COD payment. Possible values are:
fcodptCollect (0) | |
fcodptPrepaid (1) |
CODRemitToAddress Property (UPSFreightShip Class)
Specifies the contact address detail of the contact to whom to send COD funds. If not specified, sender address will be used.
Syntax
public AddressDetail getCODRemitToAddress(); public void setCODRemitToAddress(AddressDetail CODRemitToAddress);
Remarks
CODRemitToContact Property (UPSFreightShip Class)
Specifies the contact detail of the contact to whom to send COD funds. If not specified, funds will be sent to the sender.
Syntax
public ContactDetail getCODRemitToContact(); public void setCODRemitToContact(ContactDetail CODRemitToContact);
Remarks
CODTotalAmount Property (UPSFreightShip Class)
The total amount of additional fees.
Syntax
public String getCODTotalAmount(); public void setCODTotalAmount(String CODTotalAmount);
Default Value
""
Remarks
UPS Freight handles your payment collections upon delivery and sends the payment to you (if applicable) for an additional charge.
CODType Property (UPSFreightShip Class)
The code that indicates the type of funds that will be used for the COD payment.
Syntax
public int getCODType(); public void setCODType(int CODType); Enumerated values: public final static int fcodtsCertifiedCheck = 0; public final static int fcodtsCash = 1; public final static int fcodtsCompanyCheck = 2;
Default Value
0
Remarks
This property specifies the type of COD requested. Possible values are:
fcodtsCertifiedCheck (0) | |
fcodtsCash (1) | |
fcodtsCompanyCheck (2) |
Commodities Property (UPSFreightShip Class)
Collection of commodity items of the shipment.
Syntax
public CommodityDetailList getCommodities(); public void setCommodities(CommodityDetailList commodities);
Remarks
This collection contains details of the commodities associated with the shipment. At least one commodity must be added for international shipments.
For each idx = 0 to CommodityCount - 1, this must be set to an instance of the CommodityDetail type, which will contain specific information about a commodity item contained in the shipment. See the CommodityDetail type for more information.
The following fields are applicable for each commodity item:
field | Required? |
Description | Yes |
FreightClass | Conditional, required only for ground shipments |
FreightIsHazardous | Conditional, required if hazardous materials are contained in the shipment |
FreightNMFC | No |
FreightNMFCSub | Conditional, required if FreightNMFC is specified |
FreightPackagingType | Yes |
NumberOfPieces | Yes |
Value | Yes |
Weight | Yes |
Note: The WeightUnit configuration setting may be set to specify KGS instead of LBS for the weight unit.
For instance, to add a commodity:
class.Commodities[0].Weight = 1500;
class.Commodities[0].FreightClass = "92.5";
class.Commodities[0].FreightNMFC = "116030";
class.Commodities[0].FreightNMFCSub = "1";
class.Commodities[0].NumberOfPieces = 1;
class.Commodities[0].Description = "Test Items";
DimensionalWeight Property (UPSFreightShip Class)
Represents the dimensional weight associated with the shipment.
Syntax
public String getDimensionalWeight();
Default Value
""
Remarks
The dimensional weight as calculated by the server and returned in the response.
This property is read-only.
Documents Property (UPSFreightShip Class)
Collection of information about each of the requested documents.
Syntax
public DocumentInfoList getDocuments(); public void setDocuments(DocumentInfoList documents);
Remarks
This collection contains information about the requested documents. Populate this collection to request specific documents such as labels, packing lists, etc. This must be set before calling GetShipmentDocuments. For example:
component.UPSAccount.Server = "https://wwwcie.ups.com/webservices/FreightShip";
component.UPSAccount.AccessKey = "Your Access Key";
component.UPSAccount.UserId = "User Id";
component.UPSAccount.Password = "Password";
component.UPSAccount.AccountNumber = "000000";
component.SenderContact.Company = "Developer Test 1";
component.SenderContact.Phone = "884530171";
component.SenderAddress.Address1 = "101 Developer Way";
component.SenderAddress.City = "Richmond";
component.SenderAddress.State = "VA";
component.SenderAddress.ZipCode = "23224";
component.SenderAddress.CountryCode = "US";
component.RecipientContact.Company = "Consignee Test 1";
component.RecipientAddress.Address1 = "1000 Consignee Street";
component.RecipientAddress.City = "Allanton";
component.RecipientAddress.State = "MO";
component.RecipientAddress.ZipCode = "63001";
component.RecipientAddress.CountryCode = "US";
component.Payor.PayorType = TPayorTypes.ptSender;
component.HandlingUnit = "SKD:1";
CommodityDetail item = new CommodityDetail();
item.Description = "LCD TVS";
item.FreightClass = "77.5";
item.Weight = "150";
item.FreightNMFC = "132680";
item.FreightNMFCSub = "02";
item.NumberOfPieces = 20;
item.Value = "100";
component.Commodities.Add(item);
DocumentInfo label = new DocumentInfo();
label.FileName = "TestLabel.pdf";
label.PrintFormat = TFreightPrintFormats.fpfLaser;
label.PrintSize = TFreightPrintSizes.fpsSize8X11;
label.DocumentType = TFreightTypeCodes.ftcLabel;
component.Documents.Add(label);
component.GetShipmentDocuments();
Console.WriteLine("Total Charge: " + component.TotalCharge);
for (int i = 0; i < component.Charges.Count; i++)
{
Console.WriteLine(component.Charges[i].ChargeType + ": " + component.Charges[i].Value);
}
Console.WriteLine("Billable Weight: " + component.BillableWeight);
Console.WriteLine("BOLID: " + component.BOLID);
Console.WriteLine("Shipment Number: " + component.ShipmentNumber);
Firewall Property (UPSFreightShip Class)
A set of properties related to firewall access.
Syntax
public Firewall getFirewall(); public void setFirewall(Firewall firewall);
Remarks
This is a Firewall type property which contains fields describing the firewall through which the class will attempt to connect.
HandlingUnit Property (UPSFreightShip Class)
Describe the Handling Units (Movable Pieces) in this Shipment.
Syntax
public String getHandlingUnit(); public void setHandlingUnit(String handlingUnit);
Default Value
""
Remarks
Code | Handling Unit Type |
SKD | SKID |
CBY | CARBOY |
PLT | PALLET |
TOT | TOTES |
LOO | LOOSE |
OTH | OTHER |
HazMatContactName Property (UPSFreightShip Class)
Identifies the contact name for questions of the hazardous materials. Required when any commodity is marked as a hazardous material.
Syntax
public String getHazMatContactName(); public void setHazMatContactName(String hazMatContactName);
Default Value
""
Remarks
This property hold the name of the person who can be contacted with questions regarding the dangerous goods in the shipment. This must be set if the shipment contains hazardous materials and FreightIsHazardous is true.
HazMatContactPhone Property (UPSFreightShip Class)
Identifies the contact phone for questions of the hazardous materials. Required when any commodity is marked as a hazardous material.
Syntax
public String getHazMatContactPhone(); public void setHazMatContactPhone(String hazMatContactPhone);
Default Value
""
Remarks
This property hold the phone number of the person who can be contacted with questions regarding the dangerous goods in the shipment. This must be set if the shipment contains hazardous materials and FreightIsHazardous is true.
Notify Property (UPSFreightShip Class)
Collection of e-mail notifications to be sent.
Syntax
public NotifyDetailList getNotify(); public void setNotify(NotifyDetailList notify);
Remarks
The Notify is optional to be provided in a ship request. This should be set only if the shipper wants to send e-mail notifications on shipment status, exceptions, and/or delivery status. Up to 3 notification requests can be made within a ship request.
For each idx = 0 to NotifyCount - 1 (where NotifyCount<=2), this must be set to an instance of the NotifyDetail type, which will contain specific information about the notification to be e-mailed. See the NotifyDetail type for more information.
Each notification has a: NotificationFlags (required), Email (required), Message (optional) tied to it.
For instance, if only one notification is requested to be sent:
class.Notify[0].Email = "test@test.com";
class.Notify[0].NotificationFlags = 0x00000001; // On Shipment
class.Notify[0].Message = "test";
This property is not available at design time.
OverSeasLeg Property (UPSFreightShip Class)
Identifies the OverSeasLeg detail. Required when origin or destination is Hawaii, Alaska, and Puerto Rico.
Syntax
public OverSeasLegDetail getOverSeasLeg(); public void setOverSeasLeg(OverSeasLegDetail overSeasLeg);
Remarks
This must be set to an instance of the OverSeasLegDetail type, which will contain the ShipmentWidth, ShipmentLength and ShipmentHeight etc. See the OverSeasLegDetail type for more information.
Payor Property (UPSFreightShip Class)
Identifies the payor of transportation charges for the shipment.
Syntax
public PayorDetail getPayor(); public void setPayor(PayorDetail payor);
Remarks
The Payor is required to be provided in a ship request. This must be set to an instance of the PayorDetail type, which will contain the payor details. See the PayorDetail type for more information.
PickupRequester Property (UPSFreightShip Class)
Identifies the pickup requester's contact info. Used with the EarliestPickupTime and LatestPickupTime configuration settings.
Syntax
public ContactDetail getPickupRequester(); public void setPickupRequester(ContactDetail pickupRequester);
Remarks
The PickupRequester is required only if a pickup is requested.
This must be set to an instance of the ContactDetail type, which will contain specific contact information about the pickup requester. See the ContactDetail type for more information.
Proxy Property (UPSFreightShip Class)
This property includes a set of properties related to proxy access.
Syntax
public Proxy getProxy(); public void setProxy(Proxy proxy);
Remarks
This property contains fields describing the proxy through which the class will attempt to connect.
RecipientAddress Property (UPSFreightShip Class)
Identifies the recipient's address.
Syntax
public AddressDetail getRecipientAddress(); public void setRecipientAddress(AddressDetail recipientAddress);
Remarks
The RecipientAddress is required to be provided in a ship request.
This must be set to an instance of the AddressDetail type, which will contain recipient's address info. See the AddressDetail type for more information.
RecipientContact Property (UPSFreightShip Class)
Identifies the recipient's contact info.
Syntax
public ContactDetail getRecipientContact(); public void setRecipientContact(ContactDetail recipientContact);
Remarks
The RecipientContact is required to be provided in a ship request.
The Company is required to be provided in the request. In domestic shipments: the FirstName and LastName are required when using UPS Next Day Air Early A.M. service. In international shipments: the FirstName and LastName are required when the CountryCode is different than CountryCode, and if Commercial Invoice international form is requested.
The RecipientContact must be set to an instance of the ContactDetail type, which will contain specific contact information about the point-of-contact recipient. See the ContactDetail type for more information.
References Property (UPSFreightShip Class)
Collection of reference numbers for the shipment.
Syntax
public ReferenceDetailList getReferences();
Remarks
This collection holds the reference numbers that identify the shipment. See ReferenceType for a complete list of possible types of reference numbers returned.
This property is read-only and not available at design time.
SenderAddress Property (UPSFreightShip Class)
Identifies the sender's address.
Syntax
public AddressDetail getSenderAddress(); public void setSenderAddress(AddressDetail senderAddress);
Remarks
The SenderAddress is required to be provided in a ship request when the GetShipmentLabels method is called.
This must be set to an instance of the AddressDetail type, which will contain shipper's address details. See the AddressDetail type for more information.
SenderContact Property (UPSFreightShip Class)
Identifies the sender's contact info.
Syntax
public ContactDetail getSenderContact(); public void setSenderContact(ContactDetail senderContact);
Remarks
The SenderContact is required to be provided in a ship request, when the GetShipmentLabels method is called.
This must be set to an instance of the ContactDetail type, which will contain specific contact information about the point-of-contact sender. See the ContactDetail type for more information.
ServiceType Property (UPSFreightShip Class)
The service selected for the shipment.
Syntax
public int getServiceType(); public void setServiceType(int serviceType); Enumerated values: public final static int stUPSFreight = 0; public final static int stUPSFreightGuaranteed = 1;
Default Value
0
Remarks
Specifies the service to be used for the shipment.
Valid values for UPS Freight are:
stUPSFreight (0) | |
stUPSFreightGuaranteed (1) |
ShipmentNumber Property (UPSFreightShip Class)
The shipment number assigned to the shipment.
Syntax
public String getShipmentNumber();
Default Value
""
Remarks
This property contains a 9 character shipment number returned in the response.
This property is read-only.
SSLAcceptServerCert Property (UPSFreightShip Class)
Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.
Syntax
public Certificate getSSLAcceptServerCert(); public void setSSLAcceptServerCert(Certificate SSLAcceptServerCert);
Remarks
If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.
You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.
Please note that this functionality is provided only for cases where you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.
SSLCert Property (UPSFreightShip Class)
The certificate to be used during SSL negotiation.
Syntax
public Certificate getSSLCert(); public void setSSLCert(Certificate SSLCert);
Remarks
The digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.
SSLProvider Property (UPSFreightShip Class)
This specifies the SSL/TLS implementation to use.
Syntax
public int getSSLProvider(); public void setSSLProvider(int SSLProvider); Enumerated values: public final static int sslpAutomatic = 0; public final static int sslpPlatform = 1; public final static int sslpInternal = 2;
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.
When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.
SSLServerCert Property (UPSFreightShip Class)
The server certificate for the last established connection.
Syntax
public Certificate getSSLServerCert();
Remarks
SSLServerCert contains the server certificate for the last established connection.
SSLServerCert is reset every time a new connection is attempted.
This property is read-only.
Timeout Property (UPSFreightShip Class)
A timeout for the class.
Syntax
public int getTimeout(); public void setTimeout(int timeout);
Default Value
60
Remarks
If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.
If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.
The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.
If Timeout expires, and the operation is not yet complete, the class throws an exception.
Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.
The default value for the Timeout property is 60 seconds.
TotalCharge Property (UPSFreightShip Class)
Represents the total shipment charge.
Syntax
public String getTotalCharge();
Default Value
""
Remarks
This property holds the total charge associated with the shipment. The value is represented in dollars and cents with two decimal places. For instance "1500.25".
This property is read-only.
UPSAccount Property (UPSFreightShip Class)
Login information for UPS.
Syntax
public UPSAccount getUPSAccount(); public void setUPSAccount(UPSAccount UPSAccount);
Remarks
This property must be set when connecting to UPS server. It contains server and login information.
Config Method (Upsfreightship Class)
Sets or retrieves a configuration setting.
Syntax
public String config(String configurationString);
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
GetShipmentDocuments Method (Upsfreightship Class)
Generates a shipping label using one of domestic UPS services.
Syntax
public void getShipmentDocuments();
Remarks
The following properties must be set before calling this method:
- Server (required)
- AccessKey (required)
- Password (required)
- UserId (required)
- AccountNumber (required)
- SenderContact (required)
- SenderAddress (required)
- RecipientContact (required)
- RecipientAddress (required)
- Documents (required)
- Commodities (required)
- WeightUnit (required; defaults to LBS)
Upon successful response, the following fields will be populated:
The documents will be written to the filenames set in Documents.Code example:
component.UPSAccount.Server = "https://wwwcie.ups.com/webservices/FreightShip";
component.UPSAccount.AccessKey = "Your Access Key";
component.UPSAccount.UserId = "User Id";
component.UPSAccount.Password = "Password";
component.UPSAccount.AccountNumber = "000000";
component.SenderContact.Company = "Developer Test 1";
component.SenderContact.Phone = "884530171";
component.SenderAddress.Address1 = "101 Developer Way";
component.SenderAddress.City = "Richmond";
component.SenderAddress.State = "VA";
component.SenderAddress.ZipCode = "23224";
component.SenderAddress.CountryCode = "US";
component.RecipientContact.Company = "Consignee Test 1";
component.RecipientAddress.Address1 = "1000 Consignee Street";
component.RecipientAddress.City = "Allanton";
component.RecipientAddress.State = "MO";
component.RecipientAddress.ZipCode = "63001";
component.RecipientAddress.CountryCode = "US";
component.Payor.PayorType = TPayorTypes.ptSender;
component.HandlingUnit = "SKD:1";
CommodityDetail item = new CommodityDetail();
item.Description = "LCD TVS";
item.FreightClass = "77.5";
item.Weight = "150";
item.FreightNMFC = "132680";
item.FreightNMFCSub = "02";
item.NumberOfPieces = 20;
item.Value = "100";
component.Commodities.Add(item);
DocumentInfo label = new DocumentInfo();
label.FileName = "TestLabel.pdf";
label.PrintFormat = TFreightPrintFormats.fpfLaser;
label.PrintSize = TFreightPrintSizes.fpsSize8X11;
label.DocumentType = TFreightTypeCodes.ftcLabel;
component.Documents.Add(label);
component.GetShipmentDocuments();
Console.WriteLine("Total Charge: " + component.TotalCharge);
for (int i = 0; i < component.Charges.Count; i++)
{
Console.WriteLine(component.Charges[i].ChargeType + ": " + component.Charges[i].Value);
}
Console.WriteLine("Billable Weight: " + component.BillableWeight);
Console.WriteLine("BOLID: " + component.BOLID);
Console.WriteLine("Shipment Number: " + component.ShipmentNumber);
Reset Method (Upsfreightship Class)
Resets the internal state of the class and all properties to their default values.
Syntax
public void reset();
Remarks
The Reset method does not have any parameters and does not return any value.
Error Event (Upsfreightship Class)
Information about errors during data delivery.
Syntax
public class DefaultUpsfreightshipEventListener implements UpsfreightshipEventListener { ... public void error(UpsfreightshipErrorEvent e) {} ... } public class UpsfreightshipErrorEvent { public int errorCode; public String description; }
Remarks
The Error event is fired in case of exceptional conditions during message processing.
ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
Notification Event (Upsfreightship Class)
Notification returned by the server upon successful request (if applicable).
Syntax
public class DefaultUpsfreightshipEventListener implements UpsfreightshipEventListener { ... public void notification(UpsfreightshipNotificationEvent e) {} ... } public class UpsfreightshipNotificationEvent { public String message; }
Remarks
When sending a request, the server may return with a successful reply or an error. However, even when a transaction is successful, a warning or a note might still be returned by the server. In such cases, the Notification event is fired.
Notifications returned through this event are non-fatal and shipments will still be processes, labels will still be printable, rates are still returned, etc. These notifications should be treated as informational only.
SSLServerAuthentication Event (Upsfreightship Class)
Fired after the server presents its certificate to the client.
Syntax
public class DefaultUpsfreightshipEventListener implements UpsfreightshipEventListener { ... public void SSLServerAuthentication(UpsfreightshipSSLServerAuthenticationEvent e) {} ... } public class UpsfreightshipSSLServerAuthenticationEvent { public byte[] certEncoded; public String certSubject; public String certIssuer; public String status; public boolean accept; }
Remarks
This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
SSLStatus Event (Upsfreightship Class)
Shows the progress of the secure connection.
Syntax
public class DefaultUpsfreightshipEventListener implements UpsfreightshipEventListener { ... public void SSLStatus(UpsfreightshipSSLStatusEvent e) {} ... } public class UpsfreightshipSSLStatusEvent { public String message; }
Remarks
The event is fired for informational and logging purposes only. Used to track the progress of the connection.
AddressDetail Type
Represents the address details of a sender or recipient.
Remarks
This type contains descriptive data of physical location of a sender or recipient.
Example: Setting the fields of a sender
SenderAddress addr = new SenderAddress
addr.Address1 = "100 Somewhere St."
addr.Address2 = "Ste 100"
addr.City = "Raleigh"
addr.State = "NC"
addr.ZipCode = "27154"
addr.CountryCode = "US"
The fields contained by this type are listed below.
Fields
Address1 String |
Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. For UPS Address1 should not exceed 35 characters. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Address2 String |
A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. For UPS Address2 should not exceed 35 characters. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AddressFlags int |
Various flags that denote information about the address.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
City String |
Name of city, town, etc. In a ship request, this is required to be provided for both sender and recipient. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CountryCode String |
Country code. This identifies a country. In a ship request, this is required to be provided for both sender and recipient. Maximum length: 2. Here is a list of country names and their codes. Code is the value that has to be provided in all requests sent where country code is to be entered. Note that with USPS you can also specify the full country name here.
* Not supported by USPS ** Has multiple values, the values used for USPS are below
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
State String |
State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ZipCode String |
Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this field will vary, depending on country. In a ship request, this is required to be provided for both sender and recipient. In all other requests, this element is required if both City and State are not present. Valid characters: A-Z; 0-9; a-z. Maximum length: 16. |
Constructors
public AddressDetail();
Certificate Type
This is the digital certificate being used.
Remarks
This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.
Fields
EffectiveDate String |
This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date: 23-Jan-2000 15:00:00. |
||||||||||||||||||||||||||||||||||||||||||||||||
Encoded String |
This is the certificate (PEM/base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate. When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string. |
||||||||||||||||||||||||||||||||||||||||||||||||
EncodedB byte[] |
This is the certificate (PEM/base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate. When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string. |
||||||||||||||||||||||||||||||||||||||||||||||||
ExpirationDate String |
This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date: 23-Jan-2001 15:00:00. |
||||||||||||||||||||||||||||||||||||||||||||||||
ExtendedKeyUsage String |
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs). |
||||||||||||||||||||||||||||||||||||||||||||||||
Fingerprint String |
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02 |
||||||||||||||||||||||||||||||||||||||||||||||||
FingerprintSHA1 String |
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84 |
||||||||||||||||||||||||||||||||||||||||||||||||
FingerprintSHA256 String |
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53 |
||||||||||||||||||||||||||||||||||||||||||||||||
Issuer String |
This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate. |
||||||||||||||||||||||||||||||||||||||||||||||||
KeyPassword String |
This is the password for the certificate's private key (if any). Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. KeyPassword. This field can be used to read such password-protected private keys. Note: this property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey. |
||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKey String |
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data. Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string. |
||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyAvailable boolean |
This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication). |
||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyContainer String |
This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms. |
||||||||||||||||||||||||||||||||||||||||||||||||
PublicKey String |
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data. |
||||||||||||||||||||||||||||||||||||||||||||||||
PublicKeyAlgorithm String |
This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm. |
||||||||||||||||||||||||||||||||||||||||||||||||
PublicKeyLength int |
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048. |
||||||||||||||||||||||||||||||||||||||||||||||||
SerialNumber String |
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number. |
||||||||||||||||||||||||||||||||||||||||||||||||
SignatureAlgorithm String |
The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm. |
||||||||||||||||||||||||||||||||||||||||||||||||
Store String |
This is the name of the certificate store for the client certificate. The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword. Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details. Designations of certificate stores are platform-dependent. The following are designations of the most common User and Machine certificate stores in Windows:
In Java, the certificate store normally is a file containing certificates and optional private keys. When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store). |
||||||||||||||||||||||||||||||||||||||||||||||||
StoreB byte[] |
This is the name of the certificate store for the client certificate. The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword. Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details. Designations of certificate stores are platform-dependent. The following are designations of the most common User and Machine certificate stores in Windows:
In Java, the certificate store normally is a file containing certificates and optional private keys. When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store). |
||||||||||||||||||||||||||||||||||||||||||||||||
StorePassword String |
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
||||||||||||||||||||||||||||||||||||||||||||||||
StoreType int |
This is the type of certificate store for this certificate. The class supports both public and private keys in a variety of formats. When the cstAuto value is used the class will automatically determine the type. This field can take one of the following values:
|
||||||||||||||||||||||||||||||||||||||||||||||||
Subject String |
This is the subject of the certificate used for client authentication. This field will be populated with the full subject of the loaded certificate. When loading a certificate the subject is used to locate the certificate in the store. If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected. The special value "*" picks a random certificate in the certificate store. The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.
If a field value contains a comma it must be quoted. |
||||||||||||||||||||||||||||||||||||||||||||||||
SubjectAltNames String |
This field contains comma-separated lists of alternative subject names for the certificate. |
||||||||||||||||||||||||||||||||||||||||||||||||
ThumbprintMD5 String |
This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. |
||||||||||||||||||||||||||||||||||||||||||||||||
ThumbprintSHA1 String |
This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. |
||||||||||||||||||||||||||||||||||||||||||||||||
ThumbprintSHA256 String |
This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. |
||||||||||||||||||||||||||||||||||||||||||||||||
Usage String |
This field contains the text description of UsageFlags. This value will be of one or more of the following strings and will be separated by commas:
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names. |
||||||||||||||||||||||||||||||||||||||||||||||||
UsageFlags int |
This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:
Please see the Usage field for a text representation of UsageFlags. This functionality currently is not available when the provider is OpenSSL. |
||||||||||||||||||||||||||||||||||||||||||||||||
Version String |
This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3". |
Constructors
public Certificate();
Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.
public Certificate( certificateFile);
Opens CertificateFile and reads out the contents as an X509 public key.
public Certificate( certificateData);
Parses CertificateData as an X509 public key.
public Certificate( certStoreType, store, storePassword, subject);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate( certStoreType, store, storePassword, subject, configurationString);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CyrptoAPI option. The default value is True (the key is persisted). "Thumbprint" - a MD5, SHA1, or SHA256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate( certStoreType, store, storePassword, encoded);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X509 certificate and search the opened store for a corresponding private key.
public Certificate( certStoreType, storeBlob, storePassword, subject);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate( certStoreType, storeBlob, storePassword, subject, configurationString);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate( certStoreType, storeBlob, storePassword, encoded);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X509 certificate and search the opened store for a corresponding private key.
ChargeDetail Type
Represents a shipment charge returned on a successful response.
Remarks
Fields
ChargeType String |
Indicates the type of the charge. A partial list of possible values are:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
Description String |
The description of the rate. The text description is provided by the class based on the value in ChargeType. If a description is not know for the ChargeType this field will hold an empty string. Possible values are:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
Value String |
The value of the charge type specified by ChargeType. |
Constructors
public ChargeDetail();
CommodityDetail Type
Represents a single commodity line item.
Remarks
This type contains specific information about a commodity line item included in the shipment. It is used in the international shipping components when either the GetPackageLabel or GetShipmentLabels method is called. For UPS, it is applicable if any of the international forms (Invoice, CO, NAFTA CO, SED or Partial Invoice) are requested.
Example: Setting the fields for a commodity line item
CommodityDetail commodity = new CommodityDetail();
commodity.Description = "Computer software"
commodity.Manufacturer = "US"
commodity.Weight = "1.0"
commodity.QuantityUnit = "EA"
commodity.UnitPrice = "99.99"
commodity.HarmonizedCode = "9031.80.90"
Note: The following fields are applicable to UPS Freight services.
field | Required? |
Description | Yes |
FreightClass | Conditional, required only for ground shipments |
FreightIsHazardous | Conditional, required if hazardous materials are contained in the shipment |
FreightNMFC | No |
FreightNMFCSub | Conditional, required if FreightNMFC is specified |
FreightPackagingType | Yes |
NumberOfPieces | Yes |
Value | Yes |
Weight | Yes |
The fields contained by this type are listed below.
Fields
Description String |
Complete and accurate description of this commodity line item. It is applicable to all international forms. Optional for Partial Invoice and required for the rest of form types. Specific description of the type of equipment and its intended use is required. Clearance delays may result if the contents are not completely and accurately described. Vague description will not be accepted by Customs. Only a portion of this field will print on the label. For FedEx, if the shipment contains documents only (i.e., Documents is set to True), then the Description has to be set to an approved value. The following table lists document descriptions approved by U.S. Customs.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ExportType int |
Indicates the export type. Applicable and required for SED only. Valid values are:
NOTE: This field is only applicable to UPS shipments. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FreightClass String |
Indicates the freight class of the commodity. The following table lists freight classes available from UPS freight services.
NOTE: This field is only applicable to UPS freight. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FreightIsHazardous boolean |
Identifies if the Commodity item is hazardous. NOTE: This field is only applicable to UPS freight. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FreightNMFC String |
Identifies the National Motor Freight Classification numbers. NOTE: This field is only applicable to UPS freight. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FreightNMFCSub String |
Identifies the sub code of National Motor Freight Classification numbers. NOTE: This field is only applicable to UPS freight. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FreightPackagingType int |
Identifies the Commodity item's packaging type. Possible values are:
NOTE: This field is only applicable to UPS freight. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HarmonizedCode String |
Unique code representing this commodity line item (for imports only). The World Trade Organization has classified all commodities with a number. This number is called a Harmonized Schedule code and ranges from six to 12 digits depending on the country. However, the first six digits of this number are more or less uniform throughout the world. Customs uses the HS number to determine the import duties, taxes and import license requirements for goods entering a country. This number is required for filling in the Customs documentation. It is applicable to Invoice, Partial Invoice and NAFTA CO. Required for NAFTA CO and optional for Partial Invoice. For NAFTA CO: For each good described in Description, identify the Harmonized Schedule (HS) tariff classification using the one of the country into whose territory the good is imported. This number must appear on import documentation that accompanies a shipment. If the shipment contains non-documents item(s) (i.e., the Documents is set to False), the HarmonizedCode is required for each commodity line item for shipments to EU countries. At least one occurrence is required for U.S. Export shipments if the TotalCustomsValue is greater than 2,500 USD or if a valid U.S. Export license is required. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer String |
Country code where the contents of this commodity line were produced, manufactured or grown in their final form. In international shipment requests, the Manufacturer is required to be entered. In FedEx, when the shipment contains documents only (i.e., Documents is set to True), this represent the country where the documents were compiled and/or produced in their final form. In this case, only the Manufacturer and Description are required to be provided in the request. If the Manufacturer is not provided, it defaults to US. When the shipment contains non-documents items (i.e., Documents is set to False and the shipment is considered dutiable), at least one occurrence of a commodity item is required to be entered. The Manufacturer has to be provided for each commodity item included in that international shipment. In UPS, this applies to Invoice, Partial Invoice, CO and NAFTA CO. It is required for Invoice and CO forms, and optional for Partial Invoice. In USPS, the value of this property is optional, and is only used by commercial shippers. If PostageProvider is set to ppEndicia or ppStamps, then the format must be 2 charachters long (for example: US for United States, CA for Canada etc.). For FedEx and UPS, XX may be used to indicate multiple countries of manufacturer. Here is a list of country names and their codes where UPS services are available. Code is the value that has to be provided in all requests sent to UPS where country code is to be entered. This is also echoed in server reply. Along with country names and their codes, we have also listed here the currency code used in that country, the maximum weight applicable to that country, whether address validation is supported and if postal code is required.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NumberOfPieces int |
The total number of packages, cartons, or containers for the commodity line item. In UPS, it is required and applicable to CO only. In FedEx, if the Documents is set to False in ship request, the NumberOfPieces is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments. This field is not applicable to USPS. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PackageNumber String |
The package number that this commodity is in. Only applicable when requesting international forms with UPS. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Quantity int |
Number of units contained in this commodity line item measured in units specified by the QuantityUnit. This is used in conjunction with the QuantityUnit and UnitPrice. For FedEx, if the Documents is set to False in ship request, the Quantity is required to be entered for each commodity item included in an international shipment. At least one occurrence is required for international dutiable (non-documents) shipments. For UPS, these are all required for Invoice form type and optional for Partial Invoice (not applicable to other international form types). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
QuantityUnit String |
Unit of measure used to express the Quantity of this commodity line item. For FedEx, if the shipment contains non-documents item(s) (i.e., the Documents is set to False), the QuantityUnit is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments. Here is a list of possible values for FedEx:
For UPS, this is required and applicable only to Invoice and Partial Invoice forms. Here is a list of possible values for QuantityUnit:
This is not available for USPS. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ScheduleBCode String |
A unique 10-digit commodity classification code for the item being exported. Before you can export a product from the United States, you must first determine its correct 10-digit Schedule B Classification Code. These codes are valid for only U.S. exports and are maintained by the U.S. Census Bureau. This is required to be provided in an international ship request only if SED is requested (i.e., one of the FormTypes is set to ftSED). This field is only applicable to UPS shipments. Current format: 10 digits. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UnitPrice String |
Value of each QuantityUnit in Quantity of this commodity line item. This is used in conjunction with the QuantityUnit and Quantity. This indicates the monetary amount used to specify the worth or price of the commodity and it should be greater than zero. For FedEx, when the shipment contains non-documents item(s) (i.e., the Documents is set to False), the UnitPrice is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments. For UPS, it is required and applicable to Invoice and Partial Invoice forms only. For USPS, use the Value field instead. Format: Limit to 6 digits after the decimal (e.g. 900.000000). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Value String |
The value of an individual item being shipped. This should be provided for each item contained in the package being shipped. This property provides the value of the set of items. If the item is 2 boxes of 50 pens and the value of each box is $10.00, "20.00" (2 boxes x $10.00) should be entered. If the value of each pen is .25, then "25.00" (100 pens x .25) should be entered. This field is only applicable to USPS and UPS freight. Note: For USPS, the maximum value for this property is "99999.99". Note: For UPS freight, the maximum value for this property is "99999999999999.99". |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight String |
The shipping weight of this commodity line item, including containers, for each commodity with a separate Harmonized Tariff Code. This weight does not include carrier equipment. For FedEx, if the shipment contains non-documents item(s) (i.e., the Documents is set to False), the Weight is required to be entered for each commodity line item included in shipment. At least one commodity occurrence is required for international dutiable (non-documents) shipments. For UPS, this is required and applicable to CO and SED forms only . When using USPS and PostageProvider is set to ppNone, the format of this field must be "XX lbs YY oz", where XX is the number of pounds and YY is the number of ounces. However, in USPS, if PostageProvider is set to ppEndicia, then the format must be one explicit decimal position in ounces (i.e. N.N formatting). |
Constructors
public CommodityDetail();
public CommodityDetail( description, manufacturer, harmonizedCode, scheduleBCode, weight, quantity, quantityUnit, unitPrice, numberOfPieces, exportType);
public CommodityDetail( description, manufacturer, harmonizedCode, scheduleBCode, weight, quantity, quantityUnit, unitPrice, numberOfPieces);
public CommodityDetail( description, manufacturer, harmonizedCode, scheduleBCode, weight, quantity, quantityUnit, unitPrice);
public CommodityDetail( description, manufacturer, harmonizedCode, scheduleBCode, quantity, quantityUnit, unitPrice);
public CommodityDetail( description, manufacturer, harmonizedCode, quantity, quantityUnit, unitPrice);
public CommodityDetail( description, manufacturer, weight);
ContactDetail Type
Represents the contact information.
Remarks
This type contains descriptive data identifying the point-of-contact person (such as sender, recipient, broker, etc.).
Example: Setting the fields of the sender
ContactDetail senderContact = new ContactDetail
senderContact.Company = "Anything Anywhere"
senderContact.FirstName = "John"
senderContact.LastName = "Doe"
senderContact.Phone = "1234567890"
senderContact.Email = "test@test.com"
The fields contained by this type are listed below.
Fields
Company String |
Identifies the contact person's company name. In a ship request, either FirstName and LastName or Company are required to be provided. |
Email String |
Identifies the contact person's email address. Maximum length: 120. |
Fax String |
Recipient's fax number. The value of this field is optional. No format checking is done on international fax numbers. |
FirstName String |
Sender's first name. The value of this property is required. Values for either FirstName and LastName or Company must be sent. |
LastName String |
Person's last name. The value of this field is required. Values for either FirstName and LastName or Company must be sent. Maximum length: 45 characters for both names or company name. |
MiddleInitial String |
Middle initial. The value of this field is optional. |
Phone String |
Identifies the contact person's phone number. In a ship request, this is required to be provided. Maximum length: 15. |
Constructors
public ContactDetail();
public ContactDetail( firstName, lastName, phone);
public ContactDetail( firstName, lastName, phone, email);
public ContactDetail( firstName, lastName, phone, email, company);
DocumentInfo Type
Specifies the information of the requested document.
Remarks
This type specifies the information of the document to be requested. This include the type of document, the printing options, and the location on disk where the file will be written. This must be set before calling GetShipmentDocuments. For example:
component.UPSAccount.Server = "https://wwwcie.ups.com/webservices/FreightShip";
component.UPSAccount.AccessKey = "Your Access Key";
component.UPSAccount.UserId = "User Id";
component.UPSAccount.Password = "Password";
component.UPSAccount.AccountNumber = "000000";
component.SenderContact.Company = "Developer Test 1";
component.SenderContact.Phone = "884530171";
component.SenderAddress.Address1 = "101 Developer Way";
component.SenderAddress.City = "Richmond";
component.SenderAddress.State = "VA";
component.SenderAddress.ZipCode = "23224";
component.SenderAddress.CountryCode = "US";
component.RecipientContact.Company = "Consignee Test 1";
component.RecipientAddress.Address1 = "1000 Consignee Street";
component.RecipientAddress.City = "Allanton";
component.RecipientAddress.State = "MO";
component.RecipientAddress.ZipCode = "63001";
component.RecipientAddress.CountryCode = "US";
component.Payor.PayorType = TPayorTypes.ptSender;
component.HandlingUnit = "SKD:1";
CommodityDetail item = new CommodityDetail();
item.Description = "LCD TVS";
item.FreightClass = "77.5";
item.Weight = "150";
item.FreightNMFC = "132680";
item.FreightNMFCSub = "02";
item.NumberOfPieces = 20;
item.Value = "100";
component.Commodities.Add(item);
DocumentInfo label = new DocumentInfo();
label.FileName = "TestLabel.pdf";
label.PrintFormat = TFreightPrintFormats.fpfLaser;
label.PrintSize = TFreightPrintSizes.fpsSize8X11;
label.DocumentType = TFreightTypeCodes.ftcLabel;
component.Documents.Add(label);
component.GetShipmentDocuments();
Console.WriteLine("Total Charge: " + component.TotalCharge);
for (int i = 0; i < component.Charges.Count; i++)
{
Console.WriteLine(component.Charges[i].ChargeType + ": " + component.Charges[i].Value);
}
Console.WriteLine("Billable Weight: " + component.BillableWeight);
Console.WriteLine("BOLID: " + component.BOLID);
Console.WriteLine("Shipment Number: " + component.ShipmentNumber);
Fields
DocumentType int |
Specifies the type of document that is requested. Possible values are:
The default value is ftcLabel (0). |
||||||||||
File String |
The decoded binary label file. |
||||||||||
FileB byte[] |
The decoded binary label file. |
||||||||||
FileName String |
Specifies where the file will be written. This field must be set before calling GetShipmentDocuments. It should contain the full path and filename to which the returned document will be written when GetShipmentDocuments is called. |
||||||||||
LabelsPerPage int |
This specifies the number of labels per page in the returned label file. Possible values are:
Required when DocumentType is fitLabel. Otherwise it is ignored. |
||||||||||
PrintFormat int |
Specifies the print format of the label. Possible values are:
Required when DocumentType is fitLabel. Otherwise it is ignored. |
||||||||||
PrintSize int |
Specifies the requested print size of the label. Possible values are:
Required when DocumentType is fitLabel. Otherwise it is ignored. |
Constructors
public DocumentInfo();
Firewall Type
This is the firewall the class will connect through.
Remarks
When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.
Fields
AutoDetect boolean |
This field tells the class whether or not to automatically detect and use firewall system settings, if available. Connection information will first be obtained from Java system properties, such as http.proxyHost and https.proxyHost. Java properties may be set in a variety of ways; please consult the Java documentation for information about how firewall and proxy values can be specified. If no Java system properties define connection information, the class will inspect the Windows registry for connection information that may be present on the system (applicable only on Windows systems). |
||||||||||
FirewallType int |
This field determines the type of firewall to connect through. The applicable values are as follows:
|
||||||||||
Host String |
This field contains the name or IP address of firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting. If this field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this field is set to the corresponding address. If the search is not successful, the class throws an exception. |
||||||||||
Password String |
This field contains a password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception. |
||||||||||
Port int |
This field contains the transmission control protocol (TCP) port for the firewall Host. See the description of the Host field for details. Note: This field is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details. |
||||||||||
User String |
This field contains a user name if authentication is to be used connecting through a firewall. If the Host is specified, this field and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, the class throws an exception. |
Constructors
public Firewall();
NotifyDetail Type
Represents a single recipient to be notified via email.
Remarks
This type contains specific information about a recipient to be notified via email on shipment, exception and/or delivery status.
In FedEx, this type is also used to specify recipients of Signature Proof of Delivery (SPOD) via fax.
The fields contained by this type are listed below.
Fields
Aggregate String |
This can be used to set the entire aggregate xml for the recipient to be notified. This is only valid for ship requests only when the EmailNotification=0x00000004 is present in the ShipmentSpecialServices. FedEx For FedEx, this aggregate should contain descriptive data required for FedEx to provide e-mail notification to the customer regarding the shipment. The format of this aggregate should be as follows:
In this aggregate, you can specify:
This setting is optional. If Aggregate is not set it will be automatically created by the class. UPS For UPS, the following format is valid:
In this aggregate, you can specify:
Note that this field does not apply for USPS and CanadaPost. |
||||||||||||||||||||||||||
Email String |
Email address of the recipient to be notified. This is required to be provided for each recipient. |
||||||||||||||||||||||||||
Fax String |
Fax number of the recipient that is going to receive the Signature Proof of Delivery via fax. When the FaxProofOfDelivery method is called, the Fax is required. In this case, the Name should be provided as well. Note this is only used by FedEx. |
||||||||||||||||||||||||||
Message String |
User defined text that will be included in the email to be sent to Email. This is optional. For FedEx, when multiple recipients exist, the message for the first recipient is the only message that will be included in the request. FedEx only allows one message for all of the recipients of the notification email. This field is not used by USPS or Canada Post. |
||||||||||||||||||||||||||
Name String |
The name associated with the notification. For FedEx, this is the name of the recipient that is going to receive the Signature Proof of Delivery via fax. When the FaxProofOfDelivery method is called, the Name is required. In this case, the Fax should be provided as well. For USPS, this name will appear in the text of the Signature Confirmation e-mail message. This field is not applicable to UPS or Canada Post. |
||||||||||||||||||||||||||
NotificationFlags int |
Identifies the type of notification requested. Valid values are:
For FedEx notifications, the following flags apply:
For UPS notifications, the following flags apply:
For CanadaPost notifications, only the On Shipment, On Exception, and On Delivery apply. This field is not used by USPS. |
||||||||||||||||||||||||||
RecipientType int |
Identifies the set of valid email notification recipient types. Valid values are:
For FedEx, when rtShipper, rtRecipient or rtBroker are set, the email address associated with their definitions will be used and the Email specified for these types will be ignored. For USPS, only the rtShipper and rtRecipient are valid. This field does not apply to UPS or Canada Post notifications. |
Constructors
public NotifyDetail();
public NotifyDetail( notificationFlags, email, message);
public NotifyDetail( notificationFlags, email);
public NotifyDetail( notificationFlags, recipientType, email);
public NotifyDetail( name, fax);
OverSeasLegDetail Type
Represents the detail information of the OverSeasLeg.
Remarks
Fields
Height int |
The height of the shipment. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this property or the TotalShipmentCubicFeet before shipping. |
Length int |
The length of the shipment. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this property or the TotalShipmentCubicFeet before shipping. |
PricePerCubicFoot String |
The price per CubicFoot. |
PricePerCWT String |
Price per Hundredweight. For shipments with Puerto Rico as a destination, you may specify this amount before shipping. |
TotalCubicFeet String |
Total cubic weight of the shipment, obtained by multiplying width by height by depth. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this amount before shipping. |
Width int |
The width of the shipment. For shipments with destinations of Hawaii, Alaska or Puerto Rico, you must specify this property or the TotalShipmentCubicFeet before shipping. |
Constructors
public OverSeasLegDetail();
PayorDetail Type
Represents the payor details responsible for payment.
Remarks
This type contains data of the responsible party for payment of shipping charges, or duties and taxes. This is used in a ship request.
Example: Setting the fields
PayorDetail payor = new PayorDetail
payor.Type = PT_RECIPIENT
payor.AccountNumber = "123456789"
payor.CountryCode = "US"
The fields contained by this type are listed below.
Fields
AccountNumber String |
The account number of the party responsible for payment (shipping charges, or duties and taxes). This is required to be provided in the ship request, only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. Otherwise, it defaults to AccountNumber. |
||||||||||
Address1 String |
Street name. In a ship request, this is required to be provided for both sender and recipient. In all other requests, it is required for a valid physical address. Combination of Address1 and Address2 should not exceed 35 characters. |
||||||||||
Address2 String |
A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. Combination of Address1 and Address2 should not exceed 35 characters. |
||||||||||
City String |
Name of city, town, etc. |
||||||||||
CountryCode String |
The country code for the payor of the shipment, or duties and taxes. When shipping via FedEx Express, the CountryCode is required to be provided in the ship request only if PayorType is set to 'RECIPIENT' or 'THIRDPARTY'. For FedEx Ground shipments, the CountryCode is required only if PayorType is set to 'THIRDPARTY'. For UPS, this should be the same as it was entered in the UPS system when this account was set up. In domestic shipments, it will always default to US. |
||||||||||
Name String |
Identifies the payor's name. Name is required only if PayorType is set to 'THIRDPARTY'. Note: This field is only applicable to UPSFreightRates and UPSFreightShip. |
||||||||||
PayorType int |
Method of payment for shipment, or duties and taxes. This is required to be provided in a ship request. Valid payment types are:
The COLLECT payment type is only supported in FedEx Ground services. The CONSIGNEE type is only supported in UPS service. For FedEx, when this field is set to a value other than 0 (ptSender), the AccountNumber and CountryCode are required to be provided in the request as well. Otherwise, those will default to AccountNumber and CountryCode. For UPS, when set to ptSender, the AccountNumber is automatically set to AccountNumber. When ptRecipient is specified, AccountNumber and ZipCode are required to be provided in the request. For return international shipments, this option is invalid for transportation charges. And, when ptThirdParty has been specified, the AccountNumber, ZipCode and CountryCode are required to be provided in the request. When ptConsignee is specified, it indicates that UPS Consignee Billing option is selected, no other fields need to be set. ptConsignee only applies to US/PR and PR/US shipment origins and destination. |
||||||||||
State String |
State or province code. This is the identifying abbreviation for US state, Canada province, etc. In a ship request, this is required to be provided for both sender and recipient (where applicable). Format and presence of this field will vary, depending on country. |
||||||||||
ZipCode String |
Payor's postal code (if applicable). This is only applicable to UPS and is the corresponding postal code of the UPS AccountNumber's pickup address. This should be the same as it was entered in the UPS system when this account was set up. It can be provided in a ship request only if the PayorType is set to 1 (RECIPIENT) or 2 (THIRDPARTY). Maximum length: 10. |
Constructors
public PayorDetail();
public PayorDetail( payorType, accountNumber, countryCode);
Proxy Type
This is the proxy the class will connect to.
Remarks
When connecting through a proxy, this type is used to specify different properties of the proxy, such as the Server and the AuthScheme.
Fields
AuthScheme int |
This field is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the User and Password fields are set. AuthScheme should be set to authNone (3) when no authentication is expected. By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the component will attempt basic authentication. If AuthScheme is set to authDigest (1), digest authentication will be attempted instead. If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token. If AuthScheme is set to authNtlm (4), NTLM authentication will be used. For security reasons, setting this field will clear the values of User and Password. |
||||||||
AutoDetect boolean |
This field tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is false. Note: This setting is applicable only in Windows. |
||||||||
Password String |
This field contains a password if authentication is to be used for the proxy. If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password]. If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server. If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation. |
||||||||
Port int |
This field contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80). See the description of the Server field for details. |
||||||||
Server String |
If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified. If the Server field is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned. |
||||||||
SSL int |
This field determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:
|
||||||||
User String |
This field contains a user name, if authentication is to be used for the proxy. If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password]. If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server. If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation. |
Constructors
public Proxy();
public Proxy( server, port);
public Proxy( server, port, user, password);
ReferenceDetail Type
Represents a reference for the shipment.
Remarks
Fields
Number String |
The reference number. |
||||||||||||||||||
NumberOfCartons int |
The number of cartons. |
||||||||||||||||||
ReferenceType int |
The type of the reference number. Possible values are:
|
||||||||||||||||||
Weight String |
The weight. |
Constructors
public ReferenceDetail();
UPSAccount Type
Represents the details of a UPS account.
Remarks
This type contains data describing the UPS server and login information.
Example: Setting the fields of an account
UPSAccount account = new UPSAccount
account.Server = "https://wwwcie.ups.com/";
account.AccessKey = "123451234512345";
account.AccountNumber = "12345";
account.Password = "my_password";
account.UserId = "my_username";
The fields contained by this type are listed below.
Fields
AccessKey String |
An identifier required to connect to a UPS server. A UserId, Password and AccessKey will be required for each request sent to UPS. This Access Key is provided to you by UPS. For this, please visit http://www.ups.com/e_comm_access/gettools_index?loc=en_US and follow the steps as instructed on that page. Please read the instructions carefully. You should register first, and after reviewing and accepting the UPS User Agreement, you should submit a request for an UPS OnLine Tools Developer's Key. After the request has been submitted, your Developer's Key will be emailed to the email address you provided to UPS during registration process. After obtaining the Developer's Key, you can then submit a request for the Access License Key (for XML tools). This will also be sent to you via email. Please save it as it is required to be used with all requests sent to any UPS server (via our class which utilizes UPS Online Tools). An Access Key provides access to UPS systems, which hold the information you or your customers need to ship, track, or rate a package. Your Developer's Key lets you get UPS OnLine Tool documentation; the Access Key lets you actually implement UPS OnLine Tools. You need only one Access Key for access to all UPS OnLine Tools. However, if multiple locations or departments will be accessing the Tools, a great way to monitor and assess usage is to have an Access Key per location. UPS recommends each site implementation of your EC (E-Commerce) solution have separate Access Keys. An example would be a company that is implementing the Tools into three parts of their organization in three different cities. In this case, it is recommended that you obtain three separate Access Keys to uniquely identify each site. If you have Production access for an API, you can still access the Test environment. If you have Test access for one or more APIs, you must Request Production Access in order to use those APIs for production requests. This is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity. Sharing the security elements (UserId, Password, AccessKey, and DeveloperKey) with third parties is strictly prohibited as expressed in the UPS Developer Agreement. |
||||||||||||||||||||||||||||||||||||
AccountNumber String |
The shipper's UPS account number. This field describes the shipper's 6- or 10- digit UPS account number. |
||||||||||||||||||||||||||||||||||||
Password String |
Password to use for logging in to a UPS Server. A UserId and Password will be required with each input request a user makes to a UPS server. These are used to authenticate the client system during login. This password is the one you chose to login when you registered for service with UPS. This is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity. Sharing the security elements (UserId, Password, AccessKey, and DeveloperKey) with third parties is strictly prohibited as expressed in the UPS Developer Agreement. Number of characters: 6..10. |
||||||||||||||||||||||||||||||||||||
Server String |
URL for the UPS server where the requests are sent. Each request requires specific processing based on the type; therefore, each component has a unique URL for connection purposes. The following URLs may be used for testing:
In a production environment, the URL for connecting to a UPS server (production environment) will be provided to you by UPS when you subscribe for UPS OnLine Tools. |
||||||||||||||||||||||||||||||||||||
UserId String |
User Id for logging in to UPS. A UserId and Password will be required with each request made to UPS. These are used to authenticate the client system during login. The UserId is the one you chose to login with when you registered for service with UPS. This is not to be shared with others outside your organization, nor is it to be packaged, distributed, or sold to any other person or entity. Sharing the security elements (UserId, Password, AccessKey, and DeveloperKey) with third parties is strictly prohibited as expressed in the UPS Developer Agreement. Maximum length: 16. |
Constructors
public UPSAccount();
Config Settings (Upsfreightship Class)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.UPSFreightShip Config Settings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AlternateDeliveryAddress:
Used to specify an XML or SOAP aggregate for Hold for Pickup or Delivery at UPS Access Points.The specified aggregate will be contained within the "AlternateDeliveryAddress" element of the request.
Sample SOAP aggregate when UseSOAP configuration setting is set to True:
Sample XML aggregate when UseSOAP configuration setting is set to False:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
BarCodeReference: Determines whether the reference number's value will be bar coded on the shipping label.If True, then the first reference number will be bar coded on the shipping label. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CurrencyCode:
The currency code associated with the monetary values present in the request.This is required to be provided if monetary values are specified in the request (such as COD amount,
insured value, customs value, etc.). This must conform to ISO standards.
Maximum length: 3. Here is a list of currency names and their codes used by UPS services.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DeliveryInstructions: Specifies the delivery instructions for your shipment.Must be 60 character maximum. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DeliveryOptions:
Value-Added Freight Delivery Services.The options can be combined. Possible values are:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HandlingCharge: Add a handling charge to your Shipment.A fixed dollar amount or a value ends with a percentage(%). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HandlingInstructions: Specifies the handling instructions for your shipment.Must be 60 character maximum. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HasXPath: Determines whether a specific element exists in the document.This method determines whether a particular XPath exists within the document. This may be used to check if a path exists before setting it via XPath. This method returns True if the XPath exists, False if not. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
IncludeNegotiatedRates: Whether to include the NegotiatedRatesIndicator in the request.This controls whether the NegotiatedRatesIndicator is sent in the request. When sent UPS will return the negotiated rates for the shipper account. When not sent UPS will return the standard, list rates. The default value is True. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ItemizedChargesCode[i]:
The Accesorial/Surcharge code of the itemized charge.The Accesorial/Surcharge code of the itemized charge.
These charges can come back at both the shipment and package level. By default they return the shipment level charges. To access the charges for each package, set PackageServiceIndex first. These charges may only come back if SubVersion is 1607 or greater. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ItemizedChargesCount:
The count of itemized charges.The count of itemized charges in the response.
These charges can come back at both the shipment and package level. By default they return the shipment level charges. To access the charges for each package, set PackageServiceIndex first. Below is an example:
These charges may only come back if SubVersion is 1607 or greater. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ItemizedChargesCurrencyCode[i]:
The currency used for the charge.The currency used for the charge.
These charges can come back at both the shipment and package level. By default they return the shipment level charges. To access the charges for each package, set PackageServiceIndex first. These charges may only come back if SubVersion is 1607 or greater. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ItemizedChargesMonetaryValue[i]:
The amount being charged.The amount of the Accesorial/Surcharge.
These charges can come back at both the shipment and package level. By default they return the shipment level charges. To access the charges for each package, set PackageServiceIndex first. These charges may only come back if SubVersion is 1607 or greater. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ItemizedChargesSubType[i]:
The subtype of the itemized charge.The subtype of the Accesorial/Surcharge.
These charges can come back at both the shipment and package level. By default they return the shipment level charges. To access the charges for each package, set PackageServiceIndex first. These charges may only come back if SubVersion is 1607 or greater. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NotificationDialect:
Used to specify the dialect for Alternate Delivery Location notifications and UAP Shipper notifications.Used to specify the dialect for Alternate Delivery Location notifications and UAP Shipper notifications. The default value is US
Possible Language / Dialect combinations:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NotificationLanguage:
Used to specify the language for Alternate Delivery Location notifications and UAP Shipper notifications.Used to specify the language for Alternate Delivery Location notifications and UAP Shipper notifications. The default value is ENG
Refer to NotificationDialect configuration setting for possible Language / Dialect combinations. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Overwrite: Determines whether files will be overwritten.If True (default value) the files are overwritten. Otherwise, an error is returned if the file exist. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PickupEarliestTime:
The earliest time a shipment can be picked up.
The formatting used for time needs to be HHMM where HH is the hour and MM is the minute. The time is on a 24 hour clock. Valid values for hours are 00 to 23 and the valid values for minutes are 00 to 59. This is required to be provided in a ship request only if UPS Pickup service is requested. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PickupInstructions: Specifies the pickup instructions for your shipment.Must be 60 character maximum. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PickupLatestTime:
The latest time a shipment can be picked up.This is required to be provided in a ship request only if UPS Pickup service is requested
Ground pickup may be scheduled up to 42 days in the future.
The formatting used for time needs to be HHMM where HH is the hour and MM is the minute. The time is on a 24 hour clock. Valid values for hours are 00 to 23 and the valid values for minutes are 00 to 59. This is required to be provided in a ship request only if UPS Pickup service is requested. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PickupOptions:
Value-Added Freight Pickup Services.The options can be combined. Possible values are:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PickupRequestConfirmationNumber: The confirmation number returned on a successful pickup request. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PiecesToSort: The number of pieces to sort and segregate.Normal loading and unloading service does not include the sorting or segregating of freight by size, brand, flavor, individual lot, etc. If a shipment needs to be sorted or segregated, UPS Freight provides the service. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RawRequest: Contains the complete request sent to the Server.This returns the complete request as sent to the server. Used for debugging purposes. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RawResponse: Contains the complete response returned by the Server.This returns the complete response as received from the server. Used for debugging purposes. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RecipientAddress3: Contains line three details for the Recipient Address.This property is used to set specific details which will appear in line three of the Recipient Address. This is usually department information. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SenderAddress3: Contains line three details for the Sender Address.This property is used to set specific details which will appear in line three of the Sender Address. This is usually department information. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ShipDate:
The date the user requests UPS to pickup the package from the origin.This is required to be provided in a ship request only if UPS Pickup service is requested
Ground pickup may be scheduled up to 42 days in the future.
This should be entered in this format: YYYYMMDD. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ShipmentIndicationType:
Whether shipment is Hold For Pickup or Delivery at UPS Access Points.Required to indicate whether shipment is Hold For Pickup at UPS Access Point for use by approved shippers to identify a UPS Access Point location as an alternate delivery option during shipment preparation or UPS Access Point Delivery, to ship parcels directly to a UPS Access Point location for collection by the receiver.
This configuration setting is required when sending an alternate delivery address via the AlternateDeliveryAddress configuration setting. Possible values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SpecialInstructions: Specifies the special instructions for your shipment.Must be 60 character maximum. This will be in the packing list file if presented. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SubVersion:
UPS SubVersion.UPS uses sub version strategy to give back new elements in the response when there is no functionality change in the request or to enhance the existing functionality. Valid values are 1601, 1607, 1701, 1707.
This setting is only applicable when using UPS. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TaxInformationIndicator: Controls whether to send a TaxInformationIndicator.This configuration setting controls whether to send a TaxInformationIndicator in the request or not. The default value is "false". | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UndeliverableEmail: The emails would be sent to this address if any notification is undeliverable. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseSOAP: Whether or not to use UPS' webservices.When set to True (default) the class will construct the request for UPS' SOAP web service, otherwise the request will be constructed for UPS' XML service. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Warning: Warning message returned by the server.This might be returned by the server even upon successful response. These warnings are usually informational. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
WeightUnit:
Weight unit.It declares the type of weight unit to be used in calculating the weight of the shipment and each package contained in it.
Valid weight types are: LBS and KGS. Defaults to LBS if a value is not passed in the transaction. Depending on the selected country, the following measurement systems are valid: KGS/CM or LBS/IN (on domestic shipments, only the later combination is applicable). So, if the WeightUnit is set to KGS, its unit of measurements is set automatically to CM. Otherwise, it is set to IN (LBS/IN). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XAttrCount: The number of records in the XAttr arrays.This property controls the size of the following arrays: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XAttrName[i]: The name of the indexed attribute.The size of the array is controlled by XAttrCount. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XAttrValue[i]: The value of the indexed attribute.The size of the array is controlled by XAttrCount. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XChildCount: The number of records in the XChild arrays.This property controls the size of the following arrays: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XChildElement[i]: The name of the indexed child element.The size of the array is controlled by XChildCount. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XChildText[i]: The text of the indexed child element.The size of the array is controlled by XChildCount. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XElement: The name of the current element.The current element is specified via the XPath. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XParent: The parent of the current element.The current element is specified via the XPath. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XPath:
Used to set the XPath within the response from the server.XPath implements a subset of the XML XPath specification, allowing you to point to specific elements in the RawResponse. XPath is 1-indexed.
The path is a series of one or more element accessors separated by '/'. The path can be absolute (starting with '/') or relative to the current XPath location.
The following are possible values for an element accessor:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
XText: The text of the current element.The current element is specified via the XPath. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HTTP Config Settings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AcceptEncoding: Used to tell the server which types of content encodings the client supports.When AllowHTTPCompression is True, the class adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The class only supports gzip and deflate decompression algorithms. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AllowHTTPCompression:
This property enables HTTP compression for receiving data.This configuration setting enables HTTP compression for receiving data.
When set to True (default), the class will accept compressed data. It then will uncompress the data it has received. The class will handle data compressed by both gzip and deflate compression algorithms.
When True, the class adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate". The default value is True. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AllowHTTPFallback:
Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server
does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".
If set to True (default), the class will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the class throws an exception if the server does not support HTTP/2. The default value is True. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AllowNTLMFallback: Whether to allow fallback from Negotiate to NTLM when authenticating.This configuration setting applies only when AuthScheme is set to Negotiate. If set to True, the class will automatically use New Technology LAN Manager (NTLM) if the server does not support Negotiate authentication. Note: The server must indicate that it supports NTLM authentication through the WWW-Authenticate header for the fallback from Negotiate to NTLM to take place. The default value is False. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Append: Whether to append data to LocalFile.This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Authorization:
The Authorization string to be sent to the server.If the Authorization property contains a nonempty string,
an Authorization HTTP request header is added to the
request. This header conveys Authorization information to the
server.
This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class. The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]". |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
BytesTransferred: Contains the number of bytes transferred in the response data.This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ChunkSize: Specifies the chunk size in bytes when using chunked encoding.This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CompressHTTPRequest:
Set to true to compress the body of a PUT or POST request.If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.
The default value is False. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EncodeURL: If set to True the URL will be encoded by the class.If set to True, the URL passed to the class will be URL encoded. The default value is False. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FollowRedirects:
Determines what happens when the server issues a redirect.This option determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds
with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.
If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the class throws an exception. Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities. Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server. A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters). The default value is 0 (Never). In this case, redirects are never followed, and the class throws an exception instead. Following are the valid options:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GetOn302Redirect: If set to True the class will perform a GET on the new location.The default value is False. If set to True, the class will perform a GET on the new location. Otherwise, it will use the same HTTP method again. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HTTP2HeadersWithoutIndexing: HTTP2 headers that should not update the dynamic header table with incremental indexing.HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HTTPVersion:
The version of HTTP used by the class.This property specifies the HTTP version used by the class. Possible values are as follows:
When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.
HTTP/2 NotesWhen using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error. If the server does not support HTTP/2, the class will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed. HTTP/2 is supported on all platforms. The class will use the internal security implementation in all cases when connecting.
HTTP/3 NotesHTTP/3 is supported only in .NET and Java. When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
IfModifiedSince:
A date determining the maximum age of the desired document.If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request.
The value of this header is used to make the HTTP request conditional: if the requested documented has not
been modified since the time specified in the field, a copy of the document will not be returned from
the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception
The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeepAlive:
Determines whether the HTTP connection is closed after completion of the request.If True, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server
that HTTP persistent connections should be used if supported.
Note: Not all servers support persistent connections. You also may explicitly add the Keep-Alive header to the request headers by setting OtherHeaders to Connection: Keep-Alive.
If False, the connection will be closed immediately after the server response is received.
The default value for KeepAlive is False. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KerberosSPN: The Service Principal Name for the Kerberos Domain Controller.If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LogLevel:
The level of detail that is logged.This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:
The value 1 (Info) logs basic information, including the URL, HTTP version, and status details. The value 2 (Verbose) logs additional information about the request and response. The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MaxHeaders:
Instructs class to save the amount of headers specified that are returned by the server after a Header event has been fired.This configuration setting should be set when the TransferredHeaders collection is to be populated when a Header event has been fired.
This value represents the number of headers that are to be saved in the collection.
To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MaxHTTPCookies:
Instructs class to save the amount of cookies specified that are returned by the server when a SetCookie event is fired.This configuration setting should be set when populating the Cookies collection as a result of an HTTP request. This value represents the number of
cookies that are to be saved in the collection.
To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MaxRedirectAttempts: Limits the number of redirects that are followed in a request.When FollowRedirects is set to any value other than frNever, the class will follow redirects until this maximum number of redirect attempts are made. The default value is 20. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NegotiatedHTTPVersion: The negotiated HTTP version.This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the class will fall back to using "1.1" automatically. This setting will indicate which version was used. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OtherHeaders:
Other headers as determined by the user (optional).This configuration setting can be set to a string of headers to be appended to the HTTP request headers.
The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") . Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail. This configuration setting is useful for extending the functionality of the class beyond what is provided. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyAuthorization: The authorization string to be sent to the proxy server.This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If User and Password are specified, this value is calculated using the algorithm specified by AuthScheme. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyAuthScheme: The authorization scheme to be used for the proxy.This configuration setting is provided for use by classs that do not directly expose Proxy properties. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyPassword: A password if authentication is to be used for the proxy.This configuration setting is provided for use by classs that do not directly expose Proxy properties. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyPort: Port for the proxy server (default 80).This configuration setting is provided for use by classs that do not directly expose Proxy properties. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyServer: Name or IP address of a proxy server (optional).This configuration setting is provided for use by classs that do not directly expose Proxy properties. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyUser: A user name if authentication is to be used for the proxy.This configuration setting is provided for use by classs that do not directly expose Proxy properties. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SentHeaders: The full set of headers as sent by the client.This configuration setting returns the complete set of raw headers as sent by the client. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
StatusLine: The first line of the last response from the server.This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description]. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TransferredData: The contents of the last response from the server.This configuration setting contains the contents of the last response from the server. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TransferredDataLimit: The maximum number of incoming bytes to be stored by the class.If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the class. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TransferredHeaders: The full set of headers as received from the server.This configuration setting returns the complete set of raw headers as received from the server. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TransferredRequest:
The full request as sent by the client.This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:
.NET
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseChunkedEncoding:
Enables or Disables HTTP chunked encoding for transfers.If UseChunkedEncoding is set to True, the class will use HTTP-chunked encoding when posting, if possible.
HTTP-chunked encoding allows large files to be sent in chunks instead of all at once.
If set to False, the class will not use HTTP-chunked encoding. The default value is False.
Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseIDNs:
Whether to encode hostnames to internationalized domain names.This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).
The default value is False and the hostname will always be used exactly as specified. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UsePlatformDeflate: Whether to use the platform implementation to decompress compressed responses.This configuration setting specifies whether the platform's deflate-algorithm implementation is used to decompress responses that use compression. If set to True (default), the platform implementation is used. If set to False, an internal implementation is used. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UsePlatformHTTPClient: Whether or not to use the platform HTTP client.When using this configuration setting, if True, the component will use the default HTTP client for the platform (URLConnection in Java, WebRequest in .NET, or CFHTTPMessage in Mac/iOS) instead of the internal HTTP implementation. This is important for environments in which direct access to sockets is limited or not allowed (e.g., in the Google AppEngine). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseProxyAutoConfigURL:
Whether to use a Proxy auto-config file when attempting a connection.This configuration specifies whether the class will attempt to use the Proxy auto-config URL when establishing a connection and AutoDetect is set to True.
When True (default), the class will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UserAgent:
Information about the user agent (browser).This is the value supplied in the HTTP User-Agent header. The default
setting is "IPWorks HTTP Component - www.nsoftware.com".
Override the default with the name and version of your software. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TCPClient Config Settings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CloseStreamAfterTransfer: If true, the component will close the upload or download stream after the transfer.This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ConnectionTimeout: Sets a separate timeout value for establishing a connection.When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallAutoDetect: Tells the class whether or not to automatically detect and use firewall system settings, if available.This configuration setting is provided for use by classs that do not directly expose Firewall properties. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallHost:
Name or IP address of firewall (optional).If a FirewallHost is given, requested connections will be authenticated through the specified firewall
when connecting.
If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned. Note: This setting is provided for use by classs that do not directly expose Firewall properties. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallListener:
If true, the component binds to a SOCKS firewall as a server (TCPClient only).This entry is for TCPClient only and does not work for other components that descend from TCPClient.
If this entry is set, the class acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case. RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event. The connection to the firewall is made by calling the Connect method. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallPassword:
Password to be used if authentication is to be used when connecting through the firewall.If FirewallHost is specified, the FirewallUser and FirewallPassword settings
are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.
Note: This setting is provided for use by classs that do not directly expose Firewall properties. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallPort:
The TCP port for the FirewallHost;.The FirewallPort is set automatically when FirewallType is set to a valid value.
Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallType:
Determines the type of firewall to connect through.The appropriate values are as follows:
Note: This setting is provided for use by classs that do not directly expose Firewall properties. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallUser:
A user name if authentication is to be used connecting through a firewall.If the FirewallHost is specified, the FirewallUser and FirewallPassword
settings are used to connect and authenticate to the Firewall. If the authentication fails, the class throws an exception.
Note: This setting is provided for use by classs that do not directly expose Firewall properties. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeepAliveInterval:
The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.When set, TCPKeepAlive will automatically be set to True.
A TCP keep-alive packet will be sent after a period of inactivity as
defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet
will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds.
This system default if this value is not specified here is 1 second.
Note: This value is not applicable in macOS. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Linger:
When set to True, connections are terminated gracefully.This property controls how a connection is closed. The default is True.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires. In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection. The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes). Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LingerTime: Time in seconds to have the connection linger. LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LocalHost:
The name of the local host through which connections are initiated or accepted.
The LocalHost setting contains the name of the local host
as obtained by the gethostname() system call, or if the
user has assigned an IP address, the value of that address.
In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LocalPort:
The port in the local host where the class binds.
This must be set before a connection is
attempted. It instructs the class to bind to a specific
port (or communication endpoint) in the local machine.
Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established. LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error. This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MaxLineLength:
The maximum amount of data to accumulate when no EOL is found.MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL
string.
If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset. If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset. The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MaxTransferRate: The transfer rate limit in bytes per second.This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ProxyExceptionsList:
A semicolon separated list of hosts and IPs to bypass when using a proxy.This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use.
When requests are made to hosts specified in this property, the proxy will not be used. For instance:
www.google.com;www.nsoftware.com |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TCPKeepAlive:
Determines whether or not the keep alive socket option is enabled.If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically
to maintain the connection. Set KeepAliveTime and KeepAliveInterval to
configure the timing of the keep-alive packets.
Note: This value is not applicable in Java. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TcpNoDelay:
Whether or not to delay when sending packets.
When true, the socket will send all data that is ready to send at once. When
false, the socket will send smaller buffered packets of data at small intervals.
This is known as the Nagle algorithm.
By default, this config is set to false. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseIPv6:
Whether to use IPv6.When set to 0 (default), the class will use IPv4 exclusively.
When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0.
Possible values are:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseNTLMv2: Whether to use NTLM V2.When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSL Config Settings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LogSSLPackets:
Controls whether SSL packets are logged when using the internal security API.When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.
When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received. Enabling this setting has no effect if SSLProvider is set to Platform. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ReuseSSLSession:
Determines if the SSL session is reused.
If set to true, the class will reuse the context if and only if the following criteria are met:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLCACerts:
A newline separated list of CA certificate to use during SSL client authentication.This setting specifies one or more CA certificates to be included in the request when performing
SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented
when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp .. d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE----- |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLCheckCRL:
Whether to check the Certificate Revocation List for the server certificate.This setting specifies whether the class will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.
When set to 0 (default) the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported. This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLCheckOCSP:
Whether to use OCSP to check the status of the server certificate.This setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the OCSP URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.
When set to 0 (default) the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported. This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLCipherStrength:
The minimum cipher strength used for bulk encryption.
This minimum cipher strength largely dependent on the security modules installed
on the system. If the cipher strength specified is not supported,
an error will be returned when connections are initiated.
Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event. Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application. When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLContextProtocol: The protocol used when getting an SSLContext instance.Possible values are SSL, SSLv2, SSLv3, TLS and TLSv1. Use it only in case your security provider does not support TLS. This is the parameter "protocol" inside the SSLContext.getInstance(protocol) call. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLEnabledCipherSuites:
The cipher suite to be used in an SSL negotiation.The enabled cipher suites to be used in SSL negotiation.
By default, the enabled cipher suites will include all available ciphers ("*"). The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered. Multiple cipher suites are separated by semicolons. Note: This value must be set after SSLProvider is set. Example values:
Possible values when SSLProvider is set to Internal include:
When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:
SSLEnabledCipherSuites is used together with SSLCipherStrength. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLEnabledProtocols:
Used to enable/disable the supported security protocols.Used to enable/disable the supported security protocols.
Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:
SSLEnabledProtocols - TLS 1.3 Notes By default when TLS 1.3 is enabled the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions. In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version. If set to 1 (Platform provider) please be aware of the following notes:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLEnableRenegotiation:
Whether the renegotiation_info SSL extension is supported.This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API.
This setting is true by default, but can be set to false to disable the extension.
This setting is only applicable when SSLProvider is set to Internal. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLIncludeCertChain:
Whether the entire certificate chain is included in the SSLServerAuthentication event.This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains
the full certificate chain. By default this value is False and only the leaf certificate will be present
in the Encoded parameter of the SSLServerAuthentication event.
If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate. Note: When SSLProvider is set to Internal this value is automatically set to true. This is needed for proper validation when using the internal provider. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLKeyLogFile:
The location of a file where per-session secrets are written for debugging purposes.This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.
When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the class will only append, it will not overwrite previous values. Note: This setting is only applicable when SSLProvider is set to Internal. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLNegotiatedCipher:
Returns the negotiated ciphersuite.Returns the ciphersuite negotiated during the SSL handshake.
Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLNegotiatedCipherStrength:
Returns the negotiated ciphersuite strength.Returns the strength of the ciphersuite negotiated during the SSL handshake.
Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLNegotiatedCipherSuite:
Returns the negotiated ciphersuite.Returns the ciphersuite negotiated during the SSL handshake represented as a single string.
Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLNegotiatedKeyExchange:
Returns the negotiated key exchange algorithm.Returns the key exchange algorithm negotiated during the SSL handshake.
Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLNegotiatedKeyExchangeStrength:
Returns the negotiated key exchange algorithm strength.Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.
Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLNegotiatedVersion:
Returns the negotiated protocol version.Returns the protocol version negotiated during the SSL handshake.
Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLServerCACerts:
A newline separated list of CA certificate to use during SSL server certificate validation.This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.
The value of this setting is a newline (CrLf) separated list of certificates. For instance: -----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp .. d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE----- |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSLTrustManagerFactoryAlgorithm: The algorithm to be used to create a TrustManager through TrustManagerFactory.Possible values include SunX509. This is the parameter "algorithm" inside the TrustManagerFactory.getInstance(algorithm) call. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TLS12SignatureAlgorithms:
Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.
When specified the class will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the class throws an exception. The format of this value is a comma separated list of hash-signature combinations. For instance:
In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TLS12SupportedGroups:
The supported groups for ECC.This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.
The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1. When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TLS13KeyShareGroups:
The groups for which to pregenerate key shares.This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange.
The groups specified here will have key share data pregenerated locally before establishing a connection.
This can prevent an additional round trip during the handshake if the group is supported by the server.
The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting. Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group. In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so. The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072 The values are ordered from most preferred to least preferred. The following values are supported:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TLS13SignatureAlgorithms:
The allowed certificate signature algorithms.This setting holds a comma separated list of allowed signature algorithms. Possible values are:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TLS13SupportedGroups:
The supported groups for (EC)DHE key exchange.This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange.
This setting should only be modified if there is a specific reason to do so.
The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192 The values are ordered from most preferred to least preferred. The following values are supported:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Socket Config Settings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AbsoluteTimeout:
Determines whether timeouts are inactivity timeouts or absolute timeouts.If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds
will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.
Note: This option is not valid for UDP ports. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FirewallData: Used to send extra data to the firewall.When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
InBufferSize:
The size in bytes of the incoming queue of the socket.
This is the size of an internal queue in the TCP/IP stack.
You can increase or decrease its size depending on the amount
of data that you will be receiving. Increasing the value of the
InBufferSize setting can provide significant improvements in
performance in some cases.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OutBufferSize:
The size in bytes of the outgoing queue of the socket.This is the size of an internal queue in the TCP/IP stack.
You can increase or decrease its size depending on the amount
of data that you will be sending. Increasing the value of the
OutBufferSize setting can provide significant improvements in
performance in some cases.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Base Config Settings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
BuildInfo: Information about the product's build.When queried, this setting will return a string containing information about the product's build. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GUIAvailable:
Tells the class whether or not a message loop is available for processing events.In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.
In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LicenseInfo:
Information about the current license.When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MaskSensitive:
Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.
This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseDaemonThreads: Whether threads created by the class are daemon threads.If set to True (default), when the class creates a thread, the thread's Daemon property will be explicitly set to True. When set to False, the class will not set the Daemon property on the created thread. The default value is True. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UseInternalSecurityAPI:
Tells the class whether or not to use the system security libraries or an internal implementation.
When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.
Setting this setting to true tells the class to use the internal implementation instead of using the system security libraries. This setting is set to false by default on all platforms. |
Trappable Errors (Upsfreightship Class)
UPSFreightShip Errors
301 Operation interrupted (or timeout). | |
432 Invalid index. | |
527 Server Error Response. | |
528 Property set with invalid data. | |
560 Missing data. |
SOAP Errors
169 Invalid param index (out of range). | |
170 Invalid namespace index (out of range). | |
171 Method not found. Please specify a valid Method. | |
172 No method URI. Please specify a valid MethodURI. | |
173 SOAP Fault. See FaultCode and/or FaultString for details. |
HTTP Errors
118 Firewall Error. Error description contains detailed message. | |
143 Busy executing current method. | |
151 HTTP protocol error. The error message has the server response. | |
152 No server specified in URL | |
153 Specified URLScheme is invalid. | |
155 Range operation is not supported by server. | |
156 Invalid cookie index (out of range). | |
301 Interrupted. | |
302 Can't open AttachedFile. |
TCPClient Errors
100 You cannot change the RemotePort at this time. A connection is in progress. | |
101 You cannot change the RemoteHost (Server) at this time. A connection is in progress. | |
102 The RemoteHost address is invalid (0.0.0.0). | |
104 Already connected. If you want to reconnect, close the current connection first. | |
106 You cannot change the LocalPort at this time. A connection is in progress. | |
107 You cannot change the LocalHost at this time. A connection is in progress. | |
112 You cannot change MaxLineLength at this time. A connection is in progress. | |
116 RemotePort cannot be zero. Please specify a valid service port number. | |
117 You cannot change the UseConnection option while the class is active. | |
135 Operation would block. | |
201 Timeout. | |
211 Action impossible in control's present state. | |
212 Action impossible while not connected. | |
213 Action impossible while listening. | |
301 Timeout. | |
303 Could not open file. | |
434 Unable to convert string to selected CodePage. | |
1105 Already connecting. If you want to reconnect, close the current connection first. | |
1117 You need to connect first. | |
1119 You cannot change the LocalHost at this time. A connection is in progress. | |
1120 Connection dropped by remote host. |
SSL Errors
270 Cannot load specified security library. | |
271 Cannot open certificate store. | |
272 Cannot find specified certificate. | |
273 Cannot acquire security credentials. | |
274 Cannot find certificate chain. | |
275 Cannot verify certificate chain. | |
276 Error during handshake. | |
280 Error verifying certificate. | |
281 Could not find client certificate. | |
282 Could not find server certificate. | |
283 Error encrypting data. | |
284 Error decrypting data. |
TCP/IP Errors
10004 [10004] Interrupted system call. | |
10009 [10009] Bad file number. | |
10013 [10013] Access denied. | |
10014 [10014] Bad address. | |
10022 [10022] Invalid argument. | |
10024 [10024] Too many open files. | |
10035 [10035] Operation would block. | |
10036 [10036] Operation now in progress. | |
10037 [10037] Operation already in progress. | |
10038 [10038] Socket operation on non-socket. | |
10039 [10039] Destination address required. | |
10040 [10040] Message too long. | |
10041 [10041] Protocol wrong type for socket. | |
10042 [10042] Bad protocol option. | |
10043 [10043] Protocol not supported. | |
10044 [10044] Socket type not supported. | |
10045 [10045] Operation not supported on socket. | |
10046 [10046] Protocol family not supported. | |
10047 [10047] Address family not supported by protocol family. | |
10048 [10048] Address already in use. | |
10049 [10049] Can't assign requested address. | |
10050 [10050] Network is down. | |
10051 [10051] Network is unreachable. | |
10052 [10052] Net dropped connection or reset. | |
10053 [10053] Software caused connection abort. | |
10054 [10054] Connection reset by peer. | |
10055 [10055] No buffer space available. | |
10056 [10056] Socket is already connected. | |
10057 [10057] Socket is not connected. | |
10058 [10058] Can't send after socket shutdown. | |
10059 [10059] Too many references, can't splice. | |
10060 [10060] Connection timed out. | |
10061 [10061] Connection refused. | |
10062 [10062] Too many levels of symbolic links. | |
10063 [10063] File name too long. | |
10064 [10064] Host is down. | |
10065 [10065] No route to host. | |
10066 [10066] Directory not empty | |
10067 [10067] Too many processes. | |
10068 [10068] Too many users. | |
10069 [10069] Disc Quota Exceeded. | |
10070 [10070] Stale NFS file handle. | |
10071 [10071] Too many levels of remote in path. | |
10091 [10091] Network subsystem is unavailable. | |
10092 [10092] WINSOCK DLL Version out of range. | |
10093 [10093] Winsock not loaded yet. | |
11001 [11001] Host not found. | |
11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup). | |
11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP. | |
11004 [11004] Valid name, no data record (check DNS setup). |
XML Errors
101 Invalid attribute index. | |
102 No attributes available. | |
103 Invalid namespace index. | |
104 No namespaces available. | |
105 Invalid element index. | |
106 No elements available. | |
107 Attribute does not exist. | |
201 Unbalanced element tag. | |
202 Unknown element prefix (can't find namespace). | |
203 Unknown attribute prefix (can't find namespace). | |
204 Invalid XML markup. | |
205 Invalid end state for parser. | |
206 Document contains unbalanced elements. | |
207 Invalid XPath. | |
208 No such child. | |
209 Top element does not match start of path. | |
210 DOM tree unavailable (set BuildDOM to true and reparse). | |
302 Can't open file. | |
401 Invalid XML would be generated. | |
402 An invalid XML name has been specified. |