CertMgr Component
Properties Methods Events Config Settings Errors
The CertMgr component is used to manage the digital certificates installed on a system.
Syntax
DPayments.InPay.Certmgr
Remarks
The component methods, such as ListCertificateStores or ListStoreCertificates, are used to list certificate stores and certificates. The corresponding lists are returned through the StoreList and CertList events. Encoded certificates are provided through the events.
You can load a certificate by setting the Cert property of the component. Then you can get information about the certificate through the corresponding fields of the Cert property (described below).
The Subject, SerialNumber, and Issuer fields identify the certificate. The EffectiveDate and ExpirationDate show the time boundaries of the certificate.
PublicKey, PublicKeyAlgorithm, PublicKeyLength, and Version provide information about the certificate keys and the certificate format (version).
UsageFlags specifies the intended usage of the certificate. The Usage field provides a text description of these flags.
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
Cert | This is the currently selected certificate. |
CertExtensions | This is a list of extensions used by the currently selected certificate. |
CertStore | This is the certificate store to search for certificates. |
CertStorePassword | This is the password for the certificate store (if any). |
CertStoreType | This is the type of certificate store for CertStore . |
ExportedCert | This is the exported certificate string. |
ExportFormat | This is the format to which the certificate is exported. |
ExportPrivateKey | This controls whether to export the private key. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
CreateCertificate | This method creates a new self-signed certificate in the current store. |
CreateKey | This method creates a new keyset associated with the provided name. |
DeleteCertificate | This method deletes the currently selected certificate from the store. |
DeleteKey | This method deletes the keyset associated with the provided name. |
ExportCertificate | This method exports the currently selected certificate. |
GenerateCSR | This method generates a new Certificate Signing Request (CSR) to be sent to a signing authority. |
ImportCertificate | This method imports a certificate from a file into the current certificate store. |
ImportSignedCSR | This method mports a signed Certificate Signing Request (CSR). |
IssueCertificate | This creates a new certificate in the current store and is signed by the selected certificate. |
ListCertificateStores | This lists the certificate stores. |
ListKeys | This lists the keysets in a Cryptographic Service Provider (CSP). |
ListMachineStores | This lists the machine certificate stores. |
ListStoreCertificates | This lists the certificates in a store. |
ReadCertificate | This loads a certificate from a file. |
ReadCSR | This reads a Certificate Signing Request (CSR). |
Reset | This resets all certificate properties to their default values. |
SaveCertificate | This method saves the currently selected public certificate to a file. |
ShowCertificateChain | This shows the certificate chain. |
SignCSR | This creates a signed certificate from a Certificate Signing Request (CSR). |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
CertChain | This event shows the certificate chain for the certificate (see the ShowCertificateChain method). |
CertList | This event lists the certificates in a store (see the ListStoreCertificates method). |
Error | Information about errors during data delivery. |
KeyList | This lists the keysets in a Cryptographic Service Provider (CSP); see the ListKeys method. |
Log | This event fires once for each log message. |
StoreList | This lists the system certificate stores (see the ListCertificateStores and ListMachineStores methods). |
Config Settings
The following is a list of config settings for the component with short descriptions. Click on the links for further details.
CertComment | A comment to include in a saved certificate. |
CertExtendedKeyUsage | The extended key usage of the certificate. |
CertKeyLength | The public key length for created certificates and keys. |
CertKeyType | The types of keys created for new certificates. |
CertPublicKeyAlgorithm | The public key algorithm used when a certificate is created. |
CertSignatureAlgorithm | The signature algorithm used when creating certificates. |
CertSubjectAltNames | Subject Alternative Names for creating or issuing certificates. |
CertUsageFlags | Sets the flags indicating the usage of the created certificate. |
CertValidityOffset | The number of days until the certificate becomes valid. |
CertValidityTime | The validity period for the certificate. |
CheckCRL | Checks the Certificate Revocation List for the selected certificate. |
CheckOCSP | Uses OCSP to check the status of the selected certificate. |
CreatedKey | The PKCS8 formatted private and public key pair created after calling CreateKey. |
CSP | The Cryptographic Service Provider. |
CSRKey | The PKCS8 formatted private key to use when generating a CSR. |
EncodeExportedCert | Whether the certificate being exported to a string is encoded. |
HasCRL | Whether the certificate supports the CRL extension. |
HasOCSP | Whether the certificate supports the OCSP extension. |
ImportCertAction | Specified the action to take if a matching certificate or a link to a matching certificate already exists. |
ImportCertStoreType | The type of certificate store being specified for import. |
JWKAlgorithm | The JWK algorithm. |
JWKExportX5C | Whether to export a certificate chain to the x5c parameter. |
JWKKeyId | The JWK key Id. |
JWKKeyOps | The JWK intended key operations list. |
JWKUse | The JWK use parameter value. |
KeyFormat | How the public and private key are formatted. |
LogLevel | The level of detail that is logged. |
ReplaceKey | Whether or not to replace an existing key when creating a new key. |
RequestSubjectAltNames | Subject Alternative Names for a Certificate Signing Request. |
X509Algorithm | Public Key Algorithm OID. |
X509SignatureAlgorithm | Signature Algorithm OID. |
BuildInfo | Information about the product's build. |
GUIAvailable | Tells the component whether or not a message loop is available for processing events. |
LicenseInfo | Information about the current license. |
MaskSensitive | Whether sensitive data is masked in log messages. |
UseInternalSecurityAPI | Tells the component whether or not to use the system security libraries or an internal implementation. |
Cert Property (CertMgr Component)
This is the currently selected certificate.
Syntax
public Certificate Cert { get; set; }
Public Property Cert As Certificate
Remarks
This property is populated when a specified certificate is found or loaded by the component. It is used to specify private or public keys. Set this property to a valid Certificate object to load a certificate and perform different operations, such as DeleteCertificate or ExportCertificate.
CertExtensions Property (CertMgr Component)
This is a list of extensions used by the currently selected certificate.
Syntax
public CertExtensionList CertExtensions { get; }
Public Property CertExtensions As CertExtensionList
Remarks
This property contains a list of extensions used by the currently selected certificate. When Cert is set, the component will read out any CertExtension and populate this list. This list also may be populated by the user before a call to CreateCertificate to add certificate extensions to the certificate to be created.
This property is not available at design time.
CertStore Property (CertMgr Component)
This is the certificate store to search for certificates.
Syntax
Default Value
"MY"
Remarks
The CertStoreType property specifies the type of the certificate store specified by CertStore. If the store is password protected, specify the password in CertStorePassword.
Designations of certificate stores are platform-dependent.
The following are designations of the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).
CertStorePassword Property (CertMgr Component)
This is the password for the certificate store (if any).
Syntax
Default Value
""
Remarks
The value of this property is used to open the certificate store if the certificate store requires a password.
CertStoreType Property (CertMgr Component)
This is the type of certificate store for CertStore .
Syntax
public CertStoreTypes CertStoreType { get; set; }
enum CertmgrCertStoreTypes { cstUser, cstMachine, cstPFXFile, cstPFXBlob, cstJKSFile, cstJKSBlob, cstPEMKeyFile, cstPEMKeyBlob, cstPublicKeyFile, cstPublicKeyBlob, cstSSHPublicKeyBlob, cstP7BFile, cstP7BBlob, cstSSHPublicKeyFile, cstPPKFile, cstPPKBlob, cstXMLFile, cstXMLBlob, cstJWKFile, cstJWKBlob, cstSecurityKey, cstBCFKSFile, cstBCFKSBlob, cstPKCS11, cstAuto }
Public Property CertStoreType As CertStoreTypes
Enum CertmgrCertStoreTypes cstUser cstMachine cstPFXFile cstPFXBlob cstJKSFile cstJKSBlob cstPEMKeyFile cstPEMKeyBlob cstPublicKeyFile cstPublicKeyBlob cstSSHPublicKeyBlob cstP7BFile cstP7BBlob cstSSHPublicKeyFile cstPPKFile cstPPKBlob cstXMLFile cstXMLBlob cstJWKFile cstJWKBlob cstSecurityKey cstBCFKSFile cstBCFKSBlob cstPKCS11 cstAuto End Enum
Default Value
0
Remarks
The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This field can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS11 interface.
To use a security key the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example: SSH Authentication with Security Key
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
ExportedCert Property (CertMgr Component)
This is the exported certificate string.
Syntax
Default Value
""
Remarks
This property holds the exported certificate if it was not exported to a file.
When calling ExportCertificate if the CertFile parameter is an empty string, the certificate will be exported as a string and available in this property. This allows certificate data to be exported without writing any data to disk.
When ExportFormat is set to PFX or P7B, the EncodeExportedCert setting controls whether the value is binary or Base64 encoded.
This property is read-only and not available at design time.
ExportFormat Property (CertMgr Component)
This is the format to which the certificate is exported.
Syntax
Default Value
"PFX"
Remarks
ExportFormat is applicable when ExportCertificate is called and may be used to specify the output format. The applicability of each format depends on whether ExportPrivateKey is set. Some formats are applicable only when exporting to a private key and some values are applicable only when exporting to a public key.
ExportFormat | Applicability | Description |
"PFX" or "PKCS12" (default) | Private Keys | A PFX file (PKCS12). |
"PEM" | Public and Private Keys |
A PEM-formatted public certificate (X509/PKCS1/PKCS8), or PEM formatted private key (PKCS1/PKCS8). When ExportPrivateKey is False the exported certificate will be a PEM formatted X509 public certificate if the certificate being exported includes X509 data. If no X509 information is present, the public key will be exported in PKCS1 public key format for RSA/DSA keys and PKCS8 public key format for ECDSA/EdDSA keys. When ExportPrivateKey is True the exported certificate will be a PEM-formatted PKCS1 private key for RSA/DSA keys and a PEM-formatted PKCS8 private key for ECDSA/EdDSA keys. For example, when ExportPrivateKey is False: -----BEGIN CERTIFICATE----- MIIBkTCB+6ADAgECAgEBMA0GCSqGSIb3DQEBBQUAMA4xDDAKBgNVBAMTAzEwMDAgFw0wNzAx ... Pg49SpQ+HcUibIpum2O0hmnySH7BPGfXD8Lu -----END CERTIFICATE-----Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY----- |
"PKCS1" | Public and Private Keys | A PEM-formatted PKCS1 key file.
For example, when ExportPrivateKey is False: -----BEGIN RSA PUBLIC KEY----- MIGJAoGBALAyxV5assz+9v7aHbj93NYN5uGB/1z7kb2Nx4hj02QyRYbcD4htkhK4Qcq2GCsG ... MxW4+pdeN4oEZ6rbMZt01bvMwNRX2GDEyQBhAgMBAAE= -----END RSA PUBLIC KEY-----Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY----- |
"PKCS8" | Public and Private Keys | A PEM-formatted PKCS8 key file.
Example when ExportPrivateKey is False: -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCxdTNtpJQbw90cq6aJEx5vRIBrAiCAB9/F ... 8UdUliXeU8UGYjVcMhGy5oPsVeBXGcPAqF2mjXdBKNnzlSlctOLnYRBS5jwRuNfTQQIDAQAB -----END PUBLIC KEY-----Example when ExportPrivateKey is True: -----BEGIN PRIVATE KEY----- MIICdQIBADANBgkqhkiG9w0BAQEFAASCAl8wggJbAgEAAoGBAPn9JMdR3tiQ3UnK ... HSvsHyEwzpBr -----END PRIVATE KEY----- |
"OpenSSH" | Public and Private Keys | An OpenSSH public or private key file.
For example, when ExportPrivateKey is False: ssh-rsa AAAAB3NzaC1y...Example when ExportPrivateKey is True: -----BEGIN OPENSSH PRIVATE KEY----- b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAlwAAAAdzc2gtcnNh ... AwQFBgcICQo= -----END OPENSSH PRIVATE KEY----- |
"PPK" | Private Keys | A PuTTY private key file.
For example, PuTTY-User-Key-File-2: ssh-rsa Encryption: none Comment: rsa-key-20180822 Public-Lines: 4 AAAAB3NzaC1yc2EAAAADAQABAAAAgQCmz5j5kWUKxfwiv6J0LQ4wN9ekpeORXVaP ... 8pSSWejQ5Q== Private-Lines: 8 AAAAgH87Sp/YcSw1dKoAZuWb0/2dKkKwMRIYEkS15caRpzAteay6WWX7l1sgBTU7 ... Oa0= Private-MAC: d53e24f44bde8d1d3844a142fbb1fa7c88ea3585 |
"SSH2PublicKey" | Public Keys | An SSH2 public key.
For example, ---- BEGIN SSH2 PUBLIC KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 PUBLIC KEY ---- |
"SSH2PrivateKey" | Private Keys | An SSH2 private key.
For example, ---- BEGIN SSH2 ENCRYPTED PRIVATE KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 ENCRYPTED PRIVATE KEY ---- |
"JWK" | Private and Public Keys | A JSON Web Key (JWK).
For example, when ExportPrivateKey is False: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q" }For example, when ExportPrivateKey is True: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q", "d": "eFBtl-uaB9Y4b-CIav5IYX4gGRFBvpBmrMOOQ7L-euI" } |
"XML" | Private and Public Keys | An XML file holding the key or X509 data.
For example, when ExportPrivateKey is False: <X509Data> <X509Certificate>MIIB...D8Lu</X509Certificate> </X509Data>For example, when ExportPrivateKey is True: <RSAKeyValue> <Modulus>+f0k...tqM=</Modulus> <Exponent>AQAB</Exponent> <P>/cOnF...tGw==</P> <Q>/DD5...dGQ==</Q> <DP>d75...N0w==</DP> <DQ>Cyv...rKQ==</DQ> <InverseQ>fsB...Qaw==</InverseQ> <D>J7p...YJE=</D> </RSAKeyValue> |
ExportPrivateKey Property (CertMgr Component)
This controls whether to export the private key.
Syntax
Default Value
True
Remarks
This property controls whether the private key is exported when ExportCertificate is called.
If set to True (default), the private key is exported. If set to False, only the public key is exported.
Config Method (CertMgr Component)
Sets or retrieves a configuration setting.
Syntax
Remarks
Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
CreateCertificate Method (CertMgr Component)
This method creates a new self-signed certificate in the current store.
Syntax
Remarks
This method creates a new self-signed certificate in the current store, which contains the following:
CertSubject specifies the subject of the new certificate. A new keyset (public/private key pair) is generated and associated with the new certificate.
The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.
Field | Meaning |
CN | Common Name. This is commonly a host name like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma it must be quoted.
SerialNumber specifies the certificate serial number. All certificates signed by the same issuer must have different (unique) serial numbers.
The time validity of the new certificate is determined by the CertValidityTime configuration setting, and the key size by the CertKeyLength configuration setting.
CreateKey Method (CertMgr Component)
This method creates a new keyset associated with the provided name.
Syntax
Remarks
This method will create a new keyset (public/private key pair) within the Cryptographic Service Provider (CSP) used by the component. The CSP can be set using the CSP configuration setting.
NOTE: This functionality is only available in Windows.
DeleteCertificate Method (CertMgr Component)
This method deletes the currently selected certificate from the store.
Syntax
public void DeleteCertificate();
Public Sub DeleteCertificate()
Remarks
This method will delete the selected certificate from the store. If the certificate cannot be deleted, an error is returned.
This functionality is currently not available when the provider is OpenSSL.
DeleteKey Method (CertMgr Component)
This method deletes the keyset associated with the provided name.
Syntax
Remarks
This method will delete the keyset (public/private key pair) associated with KeyName from the Cryptographic Service Provider (CSP). The CSP can be set using the CSP configuration setting.
NOTE: This functionality is only available in Windows.
ExportCertificate Method (CertMgr Component)
This method exports the currently selected certificate.
Syntax
Remarks
This method exports the certificate currently selected by Cert to the file specified by the CertFile parameter in the format specified by ExportFormat. This method may be used effectively to convert between a variety of formats.
The Password parameter specifies a password for the private key when ExportPrivateKey is set to True. Password is not applicable when ExportPrivateKey is set to False.
If CertFile is set to an empty string, the exported certificate will not be written to disk and instead will be held as a string by the ExportedCert property.
ExportFormat is applicable when ExportCertificate is called and may be used to specify the output format. The applicability of each format depends on whether ExportPrivateKey is set. Some formats are applicable only when exporting to a private key and some values are applicable only when exporting to a public key.
ExportFormat | Applicability | Description |
"PFX" or "PKCS12" (default) | Private Keys | A PFX file (PKCS12). |
"PEM" | Public and Private Keys |
A PEM-formatted public certificate (X509/PKCS1/PKCS8), or PEM formatted private key (PKCS1/PKCS8). When ExportPrivateKey is False the exported certificate will be a PEM formatted X509 public certificate if the certificate being exported includes X509 data. If no X509 information is present, the public key will be exported in PKCS1 public key format for RSA/DSA keys and PKCS8 public key format for ECDSA/EdDSA keys. When ExportPrivateKey is True the exported certificate will be a PEM-formatted PKCS1 private key for RSA/DSA keys and a PEM-formatted PKCS8 private key for ECDSA/EdDSA keys. For example, when ExportPrivateKey is False: -----BEGIN CERTIFICATE----- MIIBkTCB+6ADAgECAgEBMA0GCSqGSIb3DQEBBQUAMA4xDDAKBgNVBAMTAzEwMDAgFw0wNzAx ... Pg49SpQ+HcUibIpum2O0hmnySH7BPGfXD8Lu -----END CERTIFICATE-----Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY----- |
"PKCS1" | Public and Private Keys | A PEM-formatted PKCS1 key file.
For example, when ExportPrivateKey is False: -----BEGIN RSA PUBLIC KEY----- MIGJAoGBALAyxV5assz+9v7aHbj93NYN5uGB/1z7kb2Nx4hj02QyRYbcD4htkhK4Qcq2GCsG ... MxW4+pdeN4oEZ6rbMZt01bvMwNRX2GDEyQBhAgMBAAE= -----END RSA PUBLIC KEY-----Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY----- |
"PKCS8" | Public and Private Keys | A PEM-formatted PKCS8 key file.
Example when ExportPrivateKey is False: -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCxdTNtpJQbw90cq6aJEx5vRIBrAiCAB9/F ... 8UdUliXeU8UGYjVcMhGy5oPsVeBXGcPAqF2mjXdBKNnzlSlctOLnYRBS5jwRuNfTQQIDAQAB -----END PUBLIC KEY-----Example when ExportPrivateKey is True: -----BEGIN PRIVATE KEY----- MIICdQIBADANBgkqhkiG9w0BAQEFAASCAl8wggJbAgEAAoGBAPn9JMdR3tiQ3UnK ... HSvsHyEwzpBr -----END PRIVATE KEY----- |
"OpenSSH" | Public and Private Keys | An OpenSSH public or private key file.
For example, when ExportPrivateKey is False: ssh-rsa AAAAB3NzaC1y...Example when ExportPrivateKey is True: -----BEGIN OPENSSH PRIVATE KEY----- b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAlwAAAAdzc2gtcnNh ... AwQFBgcICQo= -----END OPENSSH PRIVATE KEY----- |
"PPK" | Private Keys | A PuTTY private key file.
For example, PuTTY-User-Key-File-2: ssh-rsa Encryption: none Comment: rsa-key-20180822 Public-Lines: 4 AAAAB3NzaC1yc2EAAAADAQABAAAAgQCmz5j5kWUKxfwiv6J0LQ4wN9ekpeORXVaP ... 8pSSWejQ5Q== Private-Lines: 8 AAAAgH87Sp/YcSw1dKoAZuWb0/2dKkKwMRIYEkS15caRpzAteay6WWX7l1sgBTU7 ... Oa0= Private-MAC: d53e24f44bde8d1d3844a142fbb1fa7c88ea3585 |
"SSH2PublicKey" | Public Keys | An SSH2 public key.
For example, ---- BEGIN SSH2 PUBLIC KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 PUBLIC KEY ---- |
"SSH2PrivateKey" | Private Keys | An SSH2 private key.
For example, ---- BEGIN SSH2 ENCRYPTED PRIVATE KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 ENCRYPTED PRIVATE KEY ---- |
"JWK" | Private and Public Keys | A JSON Web Key (JWK).
For example, when ExportPrivateKey is False: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q" }For example, when ExportPrivateKey is True: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q", "d": "eFBtl-uaB9Y4b-CIav5IYX4gGRFBvpBmrMOOQ7L-euI" } |
"XML" | Private and Public Keys | An XML file holding the key or X509 data.
For example, when ExportPrivateKey is False: <X509Data> <X509Certificate>MIIB...D8Lu</X509Certificate> </X509Data>For example, when ExportPrivateKey is True: <RSAKeyValue> <Modulus>+f0k...tqM=</Modulus> <Exponent>AQAB</Exponent> <P>/cOnF...tGw==</P> <Q>/DD5...dGQ==</Q> <DP>d75...N0w==</DP> <DQ>Cyv...rKQ==</DQ> <InverseQ>fsB...Qaw==</InverseQ> <D>J7p...YJE=</D> </RSAKeyValue> |
ExportCertificate Example:
//Convert from PFX to PPK
certmgr.Cert = new Certificate(CertStoreTypes.cstPFXFile, "..\\test.pfx", "password", "*");
certmgr.ExportPrivateKey = true;
certmgr.ExportFormat = "PPK";
certmgr.ExportCertificate("..\\test.ppk", "newpassword");
//Export public certificate from PFX
certmgr.Cert = new Certificate(CertStoreTypes.cstPFXFile, "..\\test.pfx", "password", "*");
certmgr.ExportPrivateKey = false;
certmgr.ExportFormat = "PEM";
certmgr.ExportCertificate("..\\exported.cer", "");
//Convert .cer file to SSH2 Public Key
certmgr.Cert = new Certificate("..\\exported.cer");
certmgr.ExportPrivateKey = false;
certmgr.ExportFormat = "SSH2PublicKey";
certmgr.ExportCertificate("..\\ssh2.pub", "");
GenerateCSR Method (CertMgr Component)
This method generates a new Certificate Signing Request (CSR) to be sent to a signing authority.
Syntax
Remarks
This method will generate a new CSR to be sent to the signing authority. CertSubject specifies the subject of the CSR. KeyName specifies the name of the keyset (public/private key pair) to be used. If the keyset does not already exist in the Cryptographic Service Provider (CSP), the component will automatically generate one. To set the CSP, use the CSP configuration setting.
Note: Remember the name of the keyset that is used when creating a CSR. The keyset must be re-associated with the certificate after the trust authority has signed the CSR.
The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.
Field | Meaning |
CN | Common Name. This is commonly a host name like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma it must be quoted.
NOTE: This functionality is only available in Windows.
ImportCertificate Method (CertMgr Component)
This method imports a certificate from a file into the current certificate store.
Syntax
Remarks
This method will import a certificate from a file into the current certificate store.
On Windows platforms, certificates may be imported only to the Windows certificate store. To load a certificate without importing it to a Windows store, set Cert.
Certificate files with or without a private key may be imported. If the file specified by CertFile contains a private key, the private key will be imported along with the public certificate. If the file specified by CertFile contains only a public certificate, only the public certificate will be imported.
The Password parameter specifies the certificate password (if any). When importing a public certificate, set Password to an empty string.
The format of the certificate file being imported must contain valid X509 data to be imported. Not all certificate file formats include X509 data, such as PPK or PKCS8 private keys. If the CertFile is of a format that cannot be imported, the component throws an exception.
Subject is optional. If empty, the first certificate in the store is loaded instead of the matching certificate.
ImportCertificate Example
//Import a PFX
certmgr.ImportCertificate("..\\test.pfx", "password", "*");
//Import a public certificate (CER)
certmgr.ImportCertificate("..\\test.cer", "", "*");
ImportSignedCSR Method (CertMgr Component)
This method mports a signed Certificate Signing Request (CSR).
Syntax
Remarks
This method will import a signed CSR. SignedCSR specifies a certificate that has been signed by a trusted authority. KeyName is the name of the keyset (public/private key pair) that was used to create the original CSR.
NOTE: This functionality is only available in Windows.
IssueCertificate Method (CertMgr Component)
This creates a new certificate in the current store and is signed by the selected certificate.
Syntax
Remarks
This method creates a new certificate in the current store and is signed by the selected certificate. CertSubject specifies the subject of the new certificate. A new keyset (public/private key pair) is generated and associated with the new certificate.
The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.
Field | Meaning |
CN | Common Name. This is commonly a host name like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma it must be quoted.
SerialNumber specifies the certificate serial number. All certificates signed by the same issuer must have different (unique) serial numbers.
The current certificate selected by the component will be used as the issuing certificate.
If no certificate has been selected in the current CertStore before calling this method, or if the selected certificate does not have an associated private key, the method throws an exception.
The time validity of the new certificate is determined by the CertValidityTime configuration setting, and the key size by the CertKeyLength configuration setting.
NOTE: This functionality is only available in Windows.
ListCertificateStores Method (CertMgr Component)
This lists the certificate stores.
Syntax
Remarks
This method lists the system certificate stores for the current user account. The results are provided through the StoreList event.
The same information is also returned upon method completion as a set of lines and is given one per certificate store name.
NOTE: This functionality is only available in Windows.
ListKeys Method (CertMgr Component)
This lists the keysets in a Cryptographic Service Provider (CSP).
Syntax
Remarks
This method lists the keys (public/private key pairs) in a CSP. The results are provided through the KeyList event.
The same information is also returned upon method completion as a set of lines and is given one per key, with each line containing the following information separated by Tab characters: KeyContainer, KeyType, AlgId, and KeyLen.
NOTE: This functionality is only available in Windows.
ListMachineStores Method (CertMgr Component)
This lists the machine certificate stores.
Syntax
Remarks
This method behaves the same as the ListCertificateStores method, but it lists the certificate stores in the machine account (under HKEY_LOCAL_MACHINE in the registry).
NOTE: This functionality is only available in Windows.
ListStoreCertificates Method (CertMgr Component)
This lists the certificates in a store.
Syntax
Remarks
This method lists the certificates in a store. The results are provided through the CertList event.
The same information is also returned upon method completion as a set of lines and is given one per certificate, with each line containing the following information separated by Tab characters: CertSubject, CertIssuer, CertSerialNumber, and HasPrivateKey (as "1" or "0").
ReadCertificate Method (CertMgr Component)
This loads a certificate from a file.
Syntax
Remarks
Note: This method is present for backward compatibility. It is recommended to specify the Cert property to load a certificate.
This method will load a certificate from a file. The file contents can be encoded in Base64 PEM or ASN DER format.
ReadCSR Method (CertMgr Component)
This reads a Certificate Signing Request (CSR).
Syntax
Remarks
This method reads a CSR and returns a string holding information about the CSR. The Cert property is also populated with relevant information about the CSR, including the following:
The method accepts the CSR parameter as either a Base64-encoded string PEM or a path to a file.The return value will be in the following format:
Certificate Request: Data: Version: 0 (0x0) Subject: C=AU, S=Some-State, O=Internet Widgits Pty Ltd Subject Public Key Info: Public Key Algorithm: X957_DSA (1.2.840.10040.4.1) Public-Key: (0 bit) pub: 02:82:01:00:66:70:68:60:08:63:bc:ff:26:62:77:74: f6:b8:a8:11:f4:2c:5d:a1:79:b9:8e:ea:30:2e:6b:5a: 1b:35:39:24:91:1b:c1:ba:49:a0:c5:af:47:6e:73:0a: f3:f6:6b:99:94:21:32:e5:24:b3:a8:a4:85:93:84:26: e8:5c:4a:5d:2e:5e:82:df:ab:cc:e5:8d:51:ac:45:c2: 09:e5:21:f1:ce:c9:a0:3d:1d:7a:ab:fa:dd:d6:56:a8: b2:61:26:8e:27:83:36:8a:0c:9b:cb:61:1a:b5:63:95: ef:a5:bd:f2:8e:a7:fc:ca:d2:81:87:a5:6a:88:03:2e: ca:fb:24:fa:d0:df:8a:2e:a9:e0:31:fc:57:e1:02:ca: ee:99:01:d2:a5:33:34:47:92:b3:8b:31:f5:f1:1d:bf: eb:07:70:71:6f:d1:c0:4c:0a:9d:99:af:ae:7e:bc:85: e4:d2:22:1c:38:4b:60:e8:31:4d:f7:10:06:10:03:55: f5:af:ba:a9:53:a5:9b:ae:d1:f8:38:34:80:e4:1c:9e: 06:8d:cc:39:3e:b2:e9:32:82:85:d2:d0:ed:b2:8e:d6: 6f:96:87:08:62:cc:9e:d3:75:76:b5:85:31:c6:a4:94: 59:15:ec:de:70:5a:34:2c:ff:27:ad:fc:14:01:e6:39: 8a:c9:91:3e: P: 00:dc:a6:15:cc:1a:e1:44:16:dc:a8:68:a4:18:9a:ab: bf:5d:bf:b7:d1:5e:38:5f:b6:0e:21:ef:df:83:6a:5c: 31:f0:c9:07:3c:13:2c:9c:32:d0:89:76:2b:80:ad:3f: 6b:5d:5a:1d:69:31:f5:80:d5:65:ba:b5:28:a3:38:ba: 93:25:c4:fc:93:99:a2:00:5d:5e:c6:1b:f2:63:f0:24: 72:52:b4:49:97:19:93:fe:47:bf:9e:2e:54:d1:8a:b9: 09:8d:54:e8:de:31:e8:0d:21:b0:81:b2:f5:bd:38:3c: 15:02:d6:c1:aa:ab:17:8f:a8:f8:1f:1b:34:09:85:75: 3d:6e:28:2d:72:af:47:fd:ae:c4:f3:78:53:d7:07:a7: c4:72:35:2d:6b:9e:42:08:1d:46:c9:38:d2:53:27:63: a2:1d:be:11:9f:dd:9d:5b:e4:ad:fa:71:30:61:84:60: a0:bf:bd:3a:51:b4:b5:1e:48:26:36:66:9e:52:f9:70: 35:e3:38:53:2e:90:ed:9f:0f:9d:67:b9:57:dd:53:e6: ca:92:58:40:6d:15:e4:ae:2e:16:74:33:ed:48:90:15: 30:b7:fd:47:58:91:d5:c5:e2:3b:1f:1d:3b:a7:59:40: 2e:22:1a:9a:89:1b:31:a2:6f:cf:4c:a1:3b:93:ed:8a: 11: Q: 00:e3:ae:12:04:80:be:0f:d4:78:ef:02:27:26:b3:64: 6d:2b:e0:c9:da:15:00:a9:9c:45:6d:e6:44:ef:dd:75: 71: G: 18:fb:52:54:fe:bc:54:9e:17:a9:51:a1:e0:b9:6a:ab: 48:0e:06:60:f3:cd:fd:3c:14:9a:a0:35:d1:33:d4:d8: b4:ee:ce:0b:5c:c7:60:24:e8:39:17:d8:75:13:90:44: f5:f6:ef:50:cd:b4:af:66:90:f7:00:13:66:2f:ea:e2: 29:39:cd:a4:16:20:df:00:fd:53:6d:02:8b:4f:09:a5: 7f:72:7c:28:c8:70:2a:85:49:a1:65:36:66:91:52:e7: 14:b1:b8:b9:79:39:a6:d5:f8:b9:cd:ce:af:2d:88:66: b5:d9:bb:9e:60:c8:9e:82:b4:3f:ff:23:37:4b:20:e4: 88:b0:d4:6e:b7:b5:8c:e6:98:cb:88:c2:6e:10:46:af: 44:0f:53:22:c2:fb:80:d3:30:05:c0:a6:4b:f8:e0:08: 3e:69:b6:17:b1:7d:2f:8f:07:66:9c:e5:94:3f:fc:ea: f9:6c:9d:49:7c:91:f3:5a:92:b4:a7:b9:dc:42:7d:1a: b0:99:ad:6d:b8:d9:03:6e:40:13:1c:3e:e2:80:f5:a1: da:75:49:29:be:36:ad:78:74:46:0d:00:e9:6d:bf:8c: 65:50:4c:ad:ba:a7:1c:ac:5a:13:9e:d6:6a:3a:9f:cb: 1f:7d:5d:e2:3e:79:22:c2:56:c8:70:74:53:9a:4e:6c: Attributes: Signature Algorithm: 2.16.840.1.101.3.4.3.2 (2.16.840.1.101.3.4.3.2) 00:30:44:02:20:42:00:86:14:2d:70:71:1b:77:b4:f0: ae:32:76:7b:1d:71:98:a2:70:69:4c:a9:e6:c1:9b:ad: df:af:a3:30:10:02:20:12:8f:ed:0b:1e:d5:f6:84:24: a9:fe:bc:45:75:eb:02:62:13:07:2c:ae:3f:ce:f3:da: 95:25:47:97:bf:a6:9e:
Reset Method (CertMgr Component)
This resets all certificate properties to their default values.
Syntax
public void Reset();
Public Sub Reset()
Remarks
This method will reset all certificate properties to their default values. If a certificate and a private key are selected or a certificate store is opened, both are released upon calling this method.
SaveCertificate Method (CertMgr Component)
This method saves the currently selected public certificate to a file.
Syntax
Remarks
Note: This method is present for backward compatibility. It is recommended to use ExportCertificate to export both public and private certificates and keys.
This method saves the public certificate of the currently selected certificate in Base64 PEM format to the location specified by the FileName parameter.
If the destination file exists, it is overwritten.
ShowCertificateChain Method (CertMgr Component)
This shows the certificate chain.
Syntax
Remarks
This method shows the certificate chain for the certificate. The results are provided through the CertChain event.
The same information is also returned upon method completion as a set of lines and is given one per key, with each line containing the following information separated by Tab characters: CertSubject, CertIssuer, CertSerialNumber, TrustStatus, and TrustInfo.
NOTE: This functionality is only available in Windows.
SignCSR Method (CertMgr Component)
This creates a signed certificate from a Certificate Signing Request (CSR).
Syntax
Remarks
This method will create a signed certificate from a CSR. CSR specifies the CSR to be signed.
SerialNumber specifies the certificate serial number. All certificates signed by the same issuer must have different (unique) serial numbers.
The time validity of the new certificate is determined by the CertValidityTime configuration setting, and the key size is determined by the CertKeyLength configuration setting.
NOTE: This functionality is only available in Windows.
CertChain Event (CertMgr Component)
This event shows the certificate chain for the certificate (see the ShowCertificateChain method).
Syntax
public event OnCertChainHandler OnCertChain; public delegate void OnCertChainHandler(object sender, CertmgrCertChainEventArgs e); public class CertmgrCertChainEventArgs : EventArgs { public string CertEncoded { get; }
public byte[] CertEncodedB { get; } public string CertSubject { get; } public string CertIssuer { get; } public string CertSerialNumber { get; } public int TrustStatus { get; } public int TrustInfo { get; } }
Public Event OnCertChain As OnCertChainHandler Public Delegate Sub OnCertChainHandler(sender As Object, e As CertmgrCertChainEventArgs) Public Class CertmgrCertChainEventArgs Inherits EventArgs Public ReadOnly Property CertEncoded As String
Public ReadOnly Property CertEncodedB As Byte() Public ReadOnly Property CertSubject As String Public ReadOnly Property CertIssuer As String Public ReadOnly Property CertSerialNumber As String Public ReadOnly Property TrustStatus As Integer Public ReadOnly Property TrustInfo As Integer End Class
Remarks
This event is fired for every certificate in the certificate chain of the certificate assigned to the component.
The TrustStatus parameter contains information about the trust status of the entire certificate chain. A value of 0 signifies that the security subsystem has verified the certificate. Other values are combinations of one or more of the following flags:
0x00000001 | This certificate or one of the certificates in the certificate chain is not time valid. |
0x00000002 | Certificates in the chain are not properly time nested. |
0x00000004 | Trust for this certificate or one of the certificates in the certificate chain has been revoked. |
0x00000008 | This certificate or one of the certificates in the certificate chain does not have a valid signature. |
0x00000010 | The certificate or the certificate chain is not valid for its proposed usage. |
0x00000020 | The certificate or certificate chain is based on an untrusted root. |
0x00000040 | The revocation status of the certificate or one of the certificates in the certificate chain is unknown. |
0x00000080 | One of the certificates in the chain was issued by a certification authority that the original certificate had certified. |
0x00010000 | The certificate chain is not complete. |
0x00020000 | A certificate trust list (CTL) used to create this chain was not time valid. |
0x00040000 | A CTL used to create this chain did not have a valid signature. |
0x00080000 | A CTL used to create this chain is not valid for this usage. |
The TrustInfo parameter contains additional information about the status of the entire certificate chain. It is a combination of one or more of the following flags:
0x00000001 | An exact match issuer certificate has been found for this certificate. |
0x00000002 | A key match issuer certificate has been found for this certificate. |
0x00000004 | A name match issuer certificate has been found for this certificate. |
0x00000008 | This certificate is self-signed. |
0x00010000 | The certificate chain created is a complex chain. |
The CertSubject and CertIssuer parameters contain the distinguished names of the certificate owner and issuer, respectively.
CertList Event (CertMgr Component)
This event lists the certificates in a store (see the ListStoreCertificates method).
Syntax
public event OnCertListHandler OnCertList; public delegate void OnCertListHandler(object sender, CertmgrCertListEventArgs e); public class CertmgrCertListEventArgs : EventArgs { public string CertEncoded { get; }
public byte[] CertEncodedB { get; } public string CertSubject { get; } public string CertIssuer { get; } public string CertSerialNumber { get; } public bool HasPrivateKey { get; } }
Public Event OnCertList As OnCertListHandler Public Delegate Sub OnCertListHandler(sender As Object, e As CertmgrCertListEventArgs) Public Class CertmgrCertListEventArgs Inherits EventArgs Public ReadOnly Property CertEncoded As String
Public ReadOnly Property CertEncodedB As Byte() Public ReadOnly Property CertSubject As String Public ReadOnly Property CertIssuer As String Public ReadOnly Property CertSerialNumber As String Public ReadOnly Property HasPrivateKey As Boolean End Class
Remarks
The CertSubject and CertIssuer parameters contain distinguished names of the certificate owner and issuer, respectively. The HasPrivateKey flag shows whether the private key for the certificate is available in the system.
The StoreList event and the ListCertificateStores and ListMachineStores methods are used to list the certificate stores in the system.
Error Event (CertMgr Component)
Information about errors during data delivery.
Syntax
public event OnErrorHandler OnError; public delegate void OnErrorHandler(object sender, CertmgrErrorEventArgs e); public class CertmgrErrorEventArgs : EventArgs { public int ErrorCode { get; } public string Description { get; } }
Public Event OnError As OnErrorHandler Public Delegate Sub OnErrorHandler(sender As Object, e As CertmgrErrorEventArgs) Public Class CertmgrErrorEventArgs Inherits EventArgs Public ReadOnly Property ErrorCode As Integer Public ReadOnly Property Description As String End Class
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the component throws an exception.
ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
KeyList Event (CertMgr Component)
This lists the keysets in a Cryptographic Service Provider (CSP); see the ListKeys method.
Syntax
public event OnKeyListHandler OnKeyList; public delegate void OnKeyListHandler(object sender, CertmgrKeyListEventArgs e); public class CertmgrKeyListEventArgs : EventArgs { public string KeyContainer { get; } public int KeyType { get; } public string AlgId { get; } public int KeyLen { get; } }
Public Event OnKeyList As OnKeyListHandler Public Delegate Sub OnKeyListHandler(sender As Object, e As CertmgrKeyListEventArgs) Public Class CertmgrKeyListEventArgs Inherits EventArgs Public ReadOnly Property KeyContainer As String Public ReadOnly Property KeyType As Integer Public ReadOnly Property AlgId As String Public ReadOnly Property KeyLen As Integer End Class
Remarks
The KeyContainer parameter is the name used to identify the keyset (public/private key pair) when it was first created.
KeyType shows the key type: 1 for key exchange (encryption) keys, and 2 for digital signature keys.
KeyLen shows the length of the public key (in bits).
Log Event (CertMgr Component)
This event fires once for each log message.
Syntax
public event OnLogHandler OnLog; public delegate void OnLogHandler(object sender, CertmgrLogEventArgs e); public class CertmgrLogEventArgs : EventArgs { public int LogLevel { get; } public string Message { get; } public string LogType { get; } }
Public Event OnLog As OnLogHandler Public Delegate Sub OnLogHandler(sender As Object, e As CertmgrLogEventArgs) Public Class CertmgrLogEventArgs Inherits EventArgs Public ReadOnly Property LogLevel As Integer Public ReadOnly Property Message As String Public ReadOnly Property LogType As String End Class
Remarks
This event fires once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.
LogLevel indicates the level of message. Possible values are as follows:
0 (None) | No events are logged. |
1 (Info - default) | Informational events are logged. |
2 (Verbose) | Detailed data are logged. |
3 (Debug) | Debug data are logged. |
Message is the log entry.
LogType identifies the type of log entry.
StoreList Event (CertMgr Component)
This lists the system certificate stores (see the ListCertificateStores and ListMachineStores methods).
Syntax
public event OnStoreListHandler OnStoreList; public delegate void OnStoreListHandler(object sender, CertmgrStoreListEventArgs e); public class CertmgrStoreListEventArgs : EventArgs { public string CertStore { get; } }
Public Event OnStoreList As OnStoreListHandler Public Delegate Sub OnStoreListHandler(sender As Object, e As CertmgrStoreListEventArgs) Public Class CertmgrStoreListEventArgs Inherits EventArgs Public ReadOnly Property CertStore As String End Class
Remarks
The CertStore parameter contains the name of the certificate store being listed.
The CertList event and the ListStoreCertificates method are used to list the certificates in the store.
CertExtension Type
This represents an extension for a certificate.
Remarks
A CertExtension represents an extension that adds to or modifies an X509 Certificate. Certificate extensions are defined by their ASN.1 Object-Identifier (OID). The Value field contains the raw data of the extension, which is usually ASN.1 encoded.
Fields
Critical Boolean |
This field specifies whether or not the extension is defined as critical. |
OID String |
This field contains the ASN.1 Object-Identifier (OID) that defines this certificate extension. |
Value String |
This field contains the raw value of the certificate extension. This value is encoded according to the extension's ASN.1 specification and should contain everything following the OID. The following example is provided for clarity. The example will
Certmgr mgr = new Certmgr();
mgr.Cert = new Certificate(CertStoreTypes.cstPFXFile, @"C:\signingcert.pfx", "password", "*");
mgr.CertExtensions.Clear();
mgr.Config("CertUsageFlags=0xA0"); //Key Encryption and Digital Signatures
mgr.Config("CertExtendedKeyUsage=1.3.6.1.5.5.7.3.1,1.3.6.1.5.5.7.3.2"); //Server and Client authentication (respectively)
mgr.Config("CertValidityTime=10000");
Netcode nc = new Netcode();
nc.Format = NetcodeFormats.fmtHex;
// Set basicConstraints to be an end-entity.
// Below is the hex-encoded value broken down.
// 30 // Tag = sequence
// 03 // Length
// 01 // Tag = boolean
// 01 // Length
// 00 // False (not a CA)
// Convert hex string to byte[]
nc.EncodedData = "3003010100";
nc.Decode();
string oid = "2.5.29.19"; // basicConstraints
byte[] value = nc.DecodedDataB;
bool critical = false;
CertExtension basicConstraints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(basicConstraints);
// Add one point: http://www.nsoftware.com/dummy/MyCA.crl
// Below is the hex-encoded value broken down.
// 30 // Tag = sequence
// 2F // Length
// 30 // Tag = DistributionPoint
// 2D // Length
// A0 // Tag = DistributionPointName
// 2B // Length
// A0 // Tag = GeneralNames
// 29 // Length
// 86 // Tag = GeneralName
// 27 // Length
// 687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C // URL
// Convert hex string to byte[]
nc.EncodedData = "302F302DA02BA0298627687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C";
nc.Decode();
oid = "2.5.29.31"; // cRLDistributionPoints
value = nc.DecodedDataB;
critical = false;
CertExtension crlDistributionPoints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(crlDistributionPoints);
mgr.IssueCertificate("CN=www.petsbymatilda.com", 123);
Console.WriteLine(mgr.Cert.Encoded);
|
ValueB Byte [] |
This field contains the raw value of the certificate extension. This value is encoded according to the extension's ASN.1 specification and should contain everything following the OID. The following example is provided for clarity. The example will
Certmgr mgr = new Certmgr();
mgr.Cert = new Certificate(CertStoreTypes.cstPFXFile, @"C:\signingcert.pfx", "password", "*");
mgr.CertExtensions.Clear();
mgr.Config("CertUsageFlags=0xA0"); //Key Encryption and Digital Signatures
mgr.Config("CertExtendedKeyUsage=1.3.6.1.5.5.7.3.1,1.3.6.1.5.5.7.3.2"); //Server and Client authentication (respectively)
mgr.Config("CertValidityTime=10000");
Netcode nc = new Netcode();
nc.Format = NetcodeFormats.fmtHex;
// Set basicConstraints to be an end-entity.
// Below is the hex-encoded value broken down.
// 30 // Tag = sequence
// 03 // Length
// 01 // Tag = boolean
// 01 // Length
// 00 // False (not a CA)
// Convert hex string to byte[]
nc.EncodedData = "3003010100";
nc.Decode();
string oid = "2.5.29.19"; // basicConstraints
byte[] value = nc.DecodedDataB;
bool critical = false;
CertExtension basicConstraints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(basicConstraints);
// Add one point: http://www.nsoftware.com/dummy/MyCA.crl
// Below is the hex-encoded value broken down.
// 30 // Tag = sequence
// 2F // Length
// 30 // Tag = DistributionPoint
// 2D // Length
// A0 // Tag = DistributionPointName
// 2B // Length
// A0 // Tag = GeneralNames
// 29 // Length
// 86 // Tag = GeneralName
// 27 // Length
// 687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C // URL
// Convert hex string to byte[]
nc.EncodedData = "302F302DA02BA0298627687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C";
nc.Decode();
oid = "2.5.29.31"; // cRLDistributionPoints
value = nc.DecodedDataB;
critical = false;
CertExtension crlDistributionPoints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(crlDistributionPoints);
mgr.IssueCertificate("CN=www.petsbymatilda.com", 123);
Console.WriteLine(mgr.Cert.Encoded);
|
Constructors
public CertExtension(string oid, byte[] value, bool critical);
Public CertExtension(ByVal oid As String, ByVal value As Byte(), ByVal critical As Boolean)
Certificate Type
This is the digital certificate being used.
Remarks
This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.
Fields
EffectiveDate String |
This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date: 23-Jan-2000 15:00:00. |
||||||||||||||||||||||||||||||||||||||||||||||||
Encoded String |
This is the certificate (PEM/base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate. When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string. |
||||||||||||||||||||||||||||||||||||||||||||||||
EncodedB Byte [] |
This is the certificate (PEM/base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate. When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string. |
||||||||||||||||||||||||||||||||||||||||||||||||
ExpirationDate String |
This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date: 23-Jan-2001 15:00:00. |
||||||||||||||||||||||||||||||||||||||||||||||||
ExtendedKeyUsage String |
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs). |
||||||||||||||||||||||||||||||||||||||||||||||||
Fingerprint String |
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02 |
||||||||||||||||||||||||||||||||||||||||||||||||
FingerprintSHA1 String |
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84 |
||||||||||||||||||||||||||||||||||||||||||||||||
FingerprintSHA256 String |
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53 |
||||||||||||||||||||||||||||||||||||||||||||||||
Issuer String |
This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate. |
||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKey String |
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data. Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string. |
||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyAvailable Boolean |
This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication). |
||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyContainer String |
This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms. |
||||||||||||||||||||||||||||||||||||||||||||||||
PublicKey String |
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data. |
||||||||||||||||||||||||||||||||||||||||||||||||
PublicKeyAlgorithm String |
This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm. |
||||||||||||||||||||||||||||||||||||||||||||||||
PublicKeyLength Integer |
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048. |
||||||||||||||||||||||||||||||||||||||||||||||||
SerialNumber String |
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number. |
||||||||||||||||||||||||||||||||||||||||||||||||
SignatureAlgorithm String |
The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm. |
||||||||||||||||||||||||||||||||||||||||||||||||
Store String |
This is the name of the certificate store for the client certificate. The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword. Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details. Designations of certificate stores are platform-dependent. The following are designations of the most common User and Machine certificate stores in Windows:
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store). |
||||||||||||||||||||||||||||||||||||||||||||||||
StoreB Byte [] |
This is the name of the certificate store for the client certificate. The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword. Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details. Designations of certificate stores are platform-dependent. The following are designations of the most common User and Machine certificate stores in Windows:
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store). |
||||||||||||||||||||||||||||||||||||||||||||||||
StorePassword String |
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
||||||||||||||||||||||||||||||||||||||||||||||||
StoreType CertStoreTypes |
This is the type of certificate store for this certificate. The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This field can take one of the following values:
|
||||||||||||||||||||||||||||||||||||||||||||||||
Subject String |
This is the subject of the certificate used for client authentication. This field will be populated with the full subject of the loaded certificate. When loading a certificate the subject is used to locate the certificate in the store. If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected. The special value "*" picks a random certificate in the certificate store. The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.
If a field value contains a comma it must be quoted. |
||||||||||||||||||||||||||||||||||||||||||||||||
SubjectAltNames String |
This field contains comma-separated lists of alternative subject names for the certificate. |
||||||||||||||||||||||||||||||||||||||||||||||||
ThumbprintMD5 String |
This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. |
||||||||||||||||||||||||||||||||||||||||||||||||
ThumbprintSHA1 String |
This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. |
||||||||||||||||||||||||||||||||||||||||||||||||
ThumbprintSHA256 String |
This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. |
||||||||||||||||||||||||||||||||||||||||||||||||
Usage String |
This field contains the text description of UsageFlags. This value will be of one or more of the following strings and will be separated by commas:
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names. |
||||||||||||||||||||||||||||||||||||||||||||||||
UsageFlags Integer |
This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:
Please see the Usage field for a text representation of UsageFlags. This functionality currently is not available when the provider is OpenSSL. |
||||||||||||||||||||||||||||||||||||||||||||||||
Version String |
This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3". |
Constructors
public Certificate();
Public Certificate()
Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.
public Certificate(string certificateFile);
Public Certificate(ByVal CertificateFile As String)
Opens CertificateFile and reads out the contents as an X509 public key.
public Certificate(byte[] certificateData);
Public Certificate(ByVal CertificateData As Byte())
Parses CertificateData as an X509 public key.
public Certificate(CertStoreTypes certStoreType, string store, string storePassword, string subject);
Public Certificate(ByVal CertStoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Subject As String)
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate(CertStoreTypes certStoreType, string store, string storePassword, string subject, string configurationString);
Public Certificate(ByVal CertStoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Subject As String, ByVal ConfigurationString As String)
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CyrptoAPI option. The default value is True (the key is persisted). "Thumbprint" - a MD5, SHA1, or SHA256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate(CertStoreTypes certStoreType, string store, string storePassword, byte[] encoded);
Public Certificate(ByVal CertStoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Encoded As Byte())
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the component will load Encoded as an X509 certificate and search the opened store for a corresponding private key.
public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, string subject);
Public Certificate(ByVal CertStoreType As CertStoreTypes, ByVal StoreBlob As Byte(), ByVal StorePassword As String, ByVal Subject As String)
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, string subject, string configurationString);
Public Certificate(ByVal CertStoreType As CertStoreTypes, ByVal StoreBlob As Byte(), ByVal StorePassword As String, ByVal Subject As String, ByVal ConfigurationString As String)
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).
public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, byte[] encoded);
Public Certificate(ByVal CertStoreType As CertStoreTypes, ByVal StoreBlob As Byte(), ByVal StorePassword As String, ByVal Encoded As Byte())
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the component will load Encoded as an X509 certificate and search the opened store for a corresponding private key.
Config Settings (CertMgr Component)
The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.CertMgr Config Settings
CertComment:
A comment to include in a saved certificate.This settings specifies the certificate comment when calling ExportCertificate.
This setting is applicable only when ExportFormat is set to one of the following values:
|
|||||||||||||||||||
CertExtendedKeyUsage:
The extended key usage of the certificate.This setting specifies the extended key usage flags of the certificate created by calling CreateCertificate or IssueCertificate.
If specified, the value is a comma-separated list of OIDs. Common OIDs are as follows:
For instance, the following value specified the extended key usage for Server Authentication, Client Authentication, and Code Signing: 1.3.6.1.5.5.7.3.1, 1.3.6.1.5.5.7.3.2, and 1.3.6.1.5.5.7.3.3 |
|||||||||||||||||||
CertKeyLength: The public key length for created certificates and keys.When CreateCertificate creates a new certificate and associated key, or when CreateKey creates a key, this setting determines the length of the new public key (in bits). The default value is 2048. | |||||||||||||||||||
CertKeyType: The types of keys created for new certificates.When CreateCertificate creates a new certificate and associated key, or when CreateKey creates a key, this setting determines the type of key generated: 1 for key exchange (encryption) keys, and 2 for digital signature keys. The default value is 1. | |||||||||||||||||||
CertPublicKeyAlgorithm:
The public key algorithm used when a certificate is created.When CreateCertificate creates a new certificate and associated key,
this setting determines the public key algorithm of the generated keys.
Following are the valid values:
|
|||||||||||||||||||
CertSignatureAlgorithm:
The signature algorithm used when creating certificates.When CreateCertificate or IssueCertificate creates a new certificate,
the signature algorithm used is specified by this setting. Following are the possible values:
|
|||||||||||||||||||
CertSubjectAltNames:
Subject Alternative Names for creating or issuing certificates.This allows the Subject Alternative Names extension to be specified when creating or issuing a certificate via CreateCertificate or IssueCertificate. This setting only supports email, DNS, URI, and IPv4 addresses. Separate alternative names should be separated by commas. For example:
|
|||||||||||||||||||
CertUsageFlags:
Sets the flags indicating the usage of the created certificate.This setting specifies the usage flags of the certificate created by calling CreateCertificate or IssueCertificate. If specified, the value is the binary or one or more of the supported values. For instance a value of
12 or 0xC is the binary or is one of the Certificate Signing and Key Signing usage flags. Following are the supported flags:
|
|||||||||||||||||||
CertValidityOffset: The number of days until the certificate becomes valid.This configuration setting can be used to change when a newly created certificate becomes valid. By default, the certificate is valid as soon as it is created. Set CertValidityOffset to the number of days that this starting period should be offset from the current day. This setting also accepts negative values for back-dating the validity of a certificate. The default value is 0. | |||||||||||||||||||
CertValidityTime:
The validity period for the certificate.This configuration setting determines the duration in days that a newly
created certificate remains valid. The certificate becomes valid
as soon as it is created, unless CertValidityOffset is set.
The duration is not changed if CertValidityOffset is set;
the certificate will still expire CertValidityTime days after the
validity period begins. The default value is 365 days.
|
|||||||||||||||||||
CheckCRL:
Checks the Certificate Revocation List for the selected certificate.When queried, this setting will check the Certificate Revocation List specified by the currently loaded Cert. The component will first obtain the list of CRL URLs from the certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the certificate. If the certificate has been revoked or any other issues are found during validation the component throws an exception.
This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems. |
|||||||||||||||||||
CheckOCSP:
Uses OCSP to check the status of the selected certificate.When queried, the component will use OCSP to check the validity of the currently loaded Cert. The component will first obtain the OCSP URL from the certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the certificate. If the certificate has been revoked or any other issues are found during validation the component throws an exception.
This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems. |
|||||||||||||||||||
CreatedKey: The PKCS8 formatted private and public key pair created after calling CreateKey.This setting returns the PKCS8 formatted private and public key pair of the key created when CreateKey is called. This is useful in scenarios where exporting the key for use in another environment is required. | |||||||||||||||||||
CSP: The Cryptographic Service Provider.The name of the Cryptographic Service Provider used to provide access to certificate signing operations. | |||||||||||||||||||
CSRKey: The PKCS8 formatted private key to use when generating a CSR.This setting optionally specifies a PKCS8 formatted private key to use when calling GenerateCSR. When set, the keyName parameter of GenerateCSR is ignored and the key specified by this setting is used instead. | |||||||||||||||||||
EncodeExportedCert:
Whether the certificate being exported to a string is encoded.This setting controls whether the certificate exported as a string when ExportCertificate is called
is encoded. If ExportFormat is set to PFX or P7B before calling ExportCertificate the exported certificate may be binary (EncodeExportedCert is False), or base64 encoded (EncodeExportedCert is True) to allow easier handling of the certificate data.
The default value is False. |
|||||||||||||||||||
HasCRL:
Whether the certificate supports the CRL extension.This setting returns true if the currently loaded Cert supports the CRL extension.
This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems. |
|||||||||||||||||||
HasOCSP:
Whether the certificate supports the OCSP extension.This setting returns true if the currently loaded Cert supports the OCSP extension.
This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems. |
|||||||||||||||||||
ImportCertAction:
Specified the action to take if a matching certificate or a link to a matching certificate already exists.When calling ImportCertificate if a matching certificate or a link to a matching certificate already exists
in the Windows certificate store this setting governs what action will be taken. Possible values are:
|
|||||||||||||||||||
ImportCertStoreType:
The type of certificate store being specified for import.When calling ImportCertificate, this setting controls the type of the certificate being specified in the first parameter.
This config can take one of the following values:
|
|||||||||||||||||||
JWKAlgorithm:
The JWK algorithm.This setting specifies the JWK algorithm. It can be set before calling ExportCertificate (if ExportFormat is set to JWK) to control the key algorithm used to create the JWK. This setting will also be populated after loading a JWK file.
Valid values are:
|
|||||||||||||||||||
JWKExportX5C:
Whether to export a certificate chain to the x5c parameter.When set to true, the component will attempt to build the X.509 certificate chain for the certificate currently selected by Cert. If successful, the x5c parameter will be added to the JWK. It can be set before calling ExportCertificate (if ExportFormat is set to JWK).
The default value is False. |
|||||||||||||||||||
JWKKeyId: The JWK key Id.This setting specifies the JWK key Id. It can be set before calling ExportCertificate (if ExportFormat is set to JWK). This setting will also be populated after loading a JWK file. | |||||||||||||||||||
JWKKeyOps:
The JWK intended key operations list.This setting specifies the intended key operations for the JWK. It can be set before calling ExportCertificate (if ExportFormat is set to JWK). This setting will also be populated after loading a JWK file.
This setting format is a JSON array. Examples: ["sign","verify"] or ["encrypt"]. |
|||||||||||||||||||
JWKUse:
The JWK use parameter value.This setting specifies the intended usage of the key. It can be set before calling ExportCertificate (if ExportFormat is set to JWK). This setting will also be populated after loading a JWK file.
Valid values are enc and sig. |
|||||||||||||||||||
KeyFormat:
How the public and private key are formatted.This setting controls the format of PublicKey and PrivateKey. By default
these fields hold PEM formatted public and private key data. When set to 1 (XML) the keys
are stored in a XML format. This only affects the values returned by the component; the actual keys remain
the same regardless of this setting. Possible values are:
|
|||||||||||||||||||
LogLevel:
The level of detail that is logged.This setting controls the level of detail that is logged through the Log event. Possible values are:
|
|||||||||||||||||||
ReplaceKey: Whether or not to replace an existing key when creating a new key.If this is false (default), the component will throw an error if a duplicate key exists while generating a new keyset using CreateKey. If set to true, the component will replace a key if it already exists when generating new keys. | |||||||||||||||||||
RequestSubjectAltNames:
Subject Alternative Names for a Certificate Signing Request.
This allows Subject Alternative Names to be added to a Certificate Signing request. The setting only supports
email, DNS, URI, and IPv4 addresses. Separate alternative names should be separated by commas. For example:
|
|||||||||||||||||||
X509Algorithm: Public Key Algorithm OID.This setting exposes the Public Key Algorithm object identifier (OID) value for the currently loaded Cert. | |||||||||||||||||||
X509SignatureAlgorithm: Signature Algorithm OID.This setting exposes the Signature Algorithm object identifier (OID) value for the currently loaded Cert. |
Base Config Settings
BuildInfo: Information about the product's build.When queried, this setting will return a string containing information about the product's build. | |
GUIAvailable:
Tells the component whether or not a message loop is available for processing events.In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.
In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the component does not attempt to process external events. |
|
LicenseInfo:
Information about the current license.When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:
|
|
MaskSensitive:
Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.
This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer. |
|
UseInternalSecurityAPI:
Tells the component whether or not to use the system security libraries or an internal implementation.
When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable.
In this case, calls to unmanaged code will be made. In certain environments this is not desirable.
To use a completely managed security implementation set this setting to true.
Setting this setting to true tells the component to use the internal implementation instead of using the system security libraries. On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default. If using the .NET Standard Library, this setting will be true on all platforms. The .NET Standard library does not support using the system security libraries. Note: This setting is static. The value set is applicable to all components used in the application. When this value is set the product's system DLL is no longer required as a reference, as all unmanaged code is stored in that file. |
Trappable Errors (CertMgr Component)
CertMgr Errors
143 Busy executing current method. | |
144 No certificate selected. | |
221 Cannot acquire CSP. | |
222 Cannot generate key. | |
270 Cannot load specified security library. | |
271 Cannot open certificate store. | |
272 Cannot find specified certificate. | |
274 Cannot get certificate chain. | |
275 Cannot verify certificate chain. | |
279 Error enumerating certificate stores. | |
280 The certificate could not be decoded. | |
281 Cannot find security provider. | |
282 Cannot add certificate to store. | |
283 The certificate could not be encoded. | |
285 Cannot create certificate signing request. | |
286 Cannot acquire Issuer private key. | |
287 Cannot delete certificate. | |
288 Cannot export certificate. |