Wrapper for an investment balance.

This allows an FI to send any number of balances to the user, complete with description and Help text. The intent is to capture the same type of balance information present on the first page of many FI brokerage statements. This aggregate can also be used to send margin call information.

This property is an optional field. When calling the GetStatement method, if the server's response does not contain this value, querying the property will return an empty string.

Aggregates are pieces of XML taken from the financial institution's original response. They contain elements that correspond to many of the component's properties. However, some of these elements, and/or their potential values, may not be supported by the component. Any user who wishes to use unsupported fields may use this aggregate property to parse out the desired data either via our OFXAggregate component or any other means.

Note: The original data from the server is returned as SGML or XML (depending on the value of OFXVersion that FI supports. If the original data is returned in SGML format, the component internally manipulates these responses into the equivalent XML format by inserting close element tags (e.g., "</ACCTID>") into the data as it comes from the server.

The value of the current balance. Interpretation of this depends on the value of BalType property:

If a balance list is present in the server response, the Amount is always present in the response for each balance listed.

The type of balance. Possible values for balance types and their meanings are as follows:

If a balance list is present in the server response, the BalType is always present in the response for each balance listed.

A description of the current balance. If a balance list is present in the server response, the Description is always present in the response for each balance listed.

The name for the current balance. If a balance list is present in the server response, the Name is always present in the response for each balance listed.

A description of the balance type. This is a string representation of the value returned by the BalType property.

The corresponding description for each balance type are as follows:

Aggregates are pieces of XML taken from the financial institution's original response. They contain elements that correspond to many of the component's properties. However, some of these elements, and/or their potential values, may not be supported by the component. Any user who wishes to use unsupported fields may use this aggregate property to parse out the desired data either via our OFXAggregate component or any other means.

Note: The original data from the server is returned as SGML or XML (depending on the value of OFXVersion that FI supports. If the original data is returned in SGML format, the component internally manipulates these responses into the equivalent XML format by inserting close element tags (e.g., "</ACCTID>") into the data as it comes from the server.

This aggregate describes a statement closing information. It contains data (elements and values) associated with the following properties:

• FITID
• DateStart
• DateEnd
• DateOpen
• DateClose
• DateDue (applicable to credit card accounts only)
• BalanceOpening
• BalanceClosing
• TotalInterest (not applicable to credit card accounts)
• TotalFees
• TotalCredit
• TotalDebit
• CreditLimit (applicable to credit card accounts only)
• ImageRef
• ImageRefType

For each aggregate returned, clients can retrieve corresponding transactions by using DateStart and DateEnd in a statement download request (when calling GetStatement method).

Closing statement balance.

This is not applicable for loan accounts.

Note: the financial institution usually returns amounts as a string that includes the sign (+/-) of the amount. However, the server may sometimes leave out a particular field if it is not required by the OFX specification. To avoid confusion that can be caused by returning integers, the component will return all amount types as a string, with the empty string ("") for fields not returned by the server.

Where there is a value returned by the server, the component will attempt to convert the string into a format that can be easily parsed into an integer value. This behavior can be controlled by the CurrencyFormat config setting. .

Opening statement balance.

Note: the financial institution usually returns amounts as a string that includes the sign (+/-) of the amount. However, the server may sometimes leave out a particular field if it is not required by the OFX specification. To avoid confusion that can be caused by returning integers, the component will return all amount types as a string, with the empty string ("") for fields not returned by the server.

Where there is a value returned by the server, the component will attempt to convert the string into a format that can be easily parsed into an integer value. This behavior can be controlled by the CurrencyFormat config setting. .

Current credit limit.

Note: the financial institution usually returns amounts as a string that includes the sign (+/-) of the amount. However, the server may sometimes leave out a particular field if it is not required by the OFX specification. To avoid confusion that can be caused by returning integers, the component will return all amount types as a string, with the empty string ("") for fields not returned by the server.

Where there is a value returned by the server, the component will attempt to convert the string into a format that can be easily parsed into an integer value. This behavior can be controlled by the CurrencyFormat config setting. .

This is applicable for credit card accounts only.

Closing statement date.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

Next payment due date. This is applicable to credit card and loan accounts only.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

End date of transaction data for this statement. A client should be able to use this date when requesting individual transactions that match this statement.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

Opening statement date.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

Start date of transaction data for this statement. A client should be able to use this date when requesting individual transactions that match this statement.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

Unique identifier assigned by financial institution to identify this particular statement closing information. This id provides a way for the client to distinguish one closing statement from another.

This is always returned in the server response for each statement.

Server specified unique identifier for the statement closing image.

This can be either image identifier (to be used during the request to retrieve the actual image when the GetImage method is called) or URL, depending on the value of ImageRefType.

Type of retrieval method for actual statement closing image.

If ImageRef is returned in the response, this can be either image identifier (to be used during the request for the image when the GetImage method is called) or a URL.

Possible values for ImageRefType are:

Current loan interest rate.

This is applicable for loan accounts only.

Type of the current loan interest rate.

This is applicable for loan accounts only.

Possible values and their meanings are:

Next minimum amount due. This is applicable to credit card and loan accounts only.

Note: the financial institution usually returns amounts as a string that includes the sign (+/-) of the amount. However, the server may sometimes leave out a particular field if it is not required by the OFX specification. To avoid confusion that can be caused by returning integers, the component will return all amount types as a string, with the empty string ("") for fields not returned by the server.

Where there is a value returned by the server, the component will attempt to convert the string into a format that can be easily parsed into an integer value. This behavior can be controlled by the CurrencyFormat config setting. .

Total credit posted on the account for this statement (period indicated by DateStart and DateEnd).

In a bank statement (checking, savings or money market account), this represents total of deposits and credits, including interest. In a credit card statement, this represents total of payments and credits.

Total of debit posted on the account for this statement (period indicated by DateStart and DateEnd).

In a bank statement (checking, savings or money market account), this represents total of checks and debits, including fees. In a credit card statement, this represents total of payments and credits.

Total fees.

In a bank statement (checking, savings or money market account), this represents total of all fees. While in a credit card statement, this represents finance charge.

Note: the financial institution usually returns amounts as a string that includes the sign (+/-) of the amount. However, the server may sometimes leave out a particular field if it is not required by the OFX specification. To avoid confusion that can be caused by returning integers, the component will return all amount types as a string, with the empty string ("") for fields not returned by the server.

Where there is a value returned by the server, the component will attempt to convert the string into a format that can be easily parsed into an integer value. This behavior can be controlled by the CurrencyFormat config setting. .

Total interest.

For bank or investment accounts, this indicates total interest posted on the account for this statement (period indicated by DateStart and DateEnd).

For loan accounts, this indicates total interest paid year to date.

This is not applicable for credit card accounts.

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

This property determines the type of firewall to connect through. The applicable values are as follows:

This property contains the name or IP address of firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

This property contains a password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

This property contains the transmission control protocol (TCP) port for the firewall Host. See the description of the Host property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

This property contains a user name if authentication is to be used connecting through a firewall. If the Host is specified, this property and Password properties are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Wrapper for an investment statement transaction.

Aggregates are pieces of XML taken from the financial institution's original response. They contain elements that correspond to many of the component's properties. However, some of these elements, and/or their potential values, may not be supported by the component. Any user who wishes to use unsupported fields may use this aggregate property to parse out the desired data either via our OFXAggregate component or any other means.

Note: The original data from the server is returned as SGML or XML (depending on the value of OFXVersion that FI supports. If the original data is returned in SGML format, the component internally manipulates these responses into the equivalent XML format by inserting close element tags (e.g., "</ACCTID>") into the data as it comes from the server.

For other than banking transactions, this is the date when the transaction trade occurred, and for stock splits, this is the day of record stored as a string.

For banking transactions, this is the date the transaction was posted to the financial institution.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

For other than banking transactions, this is the date when settlement occurred, and for stock splits, this is the execution date.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

Transaction Id assigned by the financial institution.

This is a unique id number that the financial institution uses to identify a particular transaction. Its primary purpose is to allow a client to detect duplicate responses, whether the server previously downloaded the transaction.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

Other information (memo) regarding this transaction. The memo property stores a notice from the broker to the customer as a string.

This property is an optional field. When calling the GetStatement method, if the server's response does not contain this value, querying the property will return an empty string.

Name for this bank transaction. When there are bank transactions returned in the statement download (i.e. TxType returned is ttINVBANKTRAN), the Name stores the name of the financial institution or a name assigned by the institution to this transaction, such as 'Customer deposit'.

This property is an optional field. When calling the GetStatement method, if the server's response does not contain this value, querying the property will return an empty string.

Security ID for this investment transaction.

This property consists of a naming standard followed by a semicolon and a 9-character identifier. The naming standard identifies the method used for assigning the identifier ("CUSIP" in the US) and is unique within the indicated naming standard. This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

The sub-account associated with the funds for the transaction. Where did the money for the transaction come from or go to. The possible values are : CASH, MARGIN, SHORT, OTHER.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

Sub-account type for the security. The possible values are: CASH, MARGIN, SHORT, OTHER.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

Transaction amount. For other than banking transactions (buys, sells, etc.) this is the transaction total: ((quantity * (price +/- markup/markdown)) +/- (commission + fees + load + taxes)).

Distributions, interest, margin interest, misc. expense, etc.: amount.

Return of cap: cost basis.

Banking transactions: this is the amount of money exchanged during a given transaction.

Note: the financial institution usually returns amounts as a string that includes the sign (+/-) of the amount. However, the server may sometimes leave out a particular field if it is not required by the OFX specification. To avoid confusion that can be caused by returning integers, the component will return all amount types as a string, with the empty string ("") for fields not returned by the server.

Where there is a value returned by the server, the component will attempt to convert the string into a format that can be easily parsed into an integer value. This behavior can be controlled by the CurrencyFormat config setting.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

This is the type of transaction that was made on the account. Checks, electronic funds transfers, and ATM transactions associated with CMA or money market sweep accounts are always represented with a bank transaction record.

Investment actions that involve securities (buy, sell, stock split, reinvest, etc.) are always represented with an investment record. Actions that are cash-only but are directly associated with a security are also investment actions (for example, dividends).

Other cash-only actions require careful analysis by the FI. Those that affect investment performance analysis should be sent using the appropriate investment action (investment income - miscellaneous, investment expense). Those that are completely unrelated to investment should be sent as a bank record.

The types and their meanings are as follows:

A description of the transaction type. This is a string representation of the value returned by the TxType property.

The types and their meanings are as follows:

Price per commonly-quoted unit, excluding markup/markdown.

It indicates:

• share price for stocks, mutual funds, and others.
• percentage of par for bonds.
• per share (not contract) for options.

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

The quantity for security-based actions other than stock splits. The Units differ for each type of security.

Depending on the type of the security, the Units indicates the following:

• Stocks, Mutual Funds and Other : number of shares.
• Bonds : face value. For example, a $25,000 bond trading at $88 would use 25000 as the units and 88 as the unit price.
• Options : number of contracts (not shares).

This property is always returned with the transaction information if such an information is requested to be included (IncludeTransactions was set to True) in the investment statement download request (when calling the GetStatement method).

Wrapper for a general open order, each pertaining to a different aggregate type.

Aggregates are pieces of XML taken from the financial institution's original response. They contain elements that correspond to many of the component's properties. However, some of these elements, and/or their potential values, may not be supported by the component. Any user who wishes to use unsupported fields may use this aggregate property to parse out the desired data either via our OFXAggregate component or any other means.

Note: The original data from the server is returned as SGML or XML (depending on the value of OFXVersion that FI supports. If the original data is returned in SGML format, the component internally manipulates these responses into the equivalent XML format by inserting close element tags (e.g., "</ACCTID>") into the data as it comes from the server.

Type of purchase for this open order. Possible values are: BUY and BUYTOCOVER (used to close short sales).

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

Date-time the order was placed.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

Indicates how long the open order is good for. The possible values are: DAY, GOODTILCANCEL, IMMEDIATE.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

Transaction Id assigned by the financial institution.

This is a unique id number that the financial institution uses to identify a particular transaction. Its primary purpose is to allow a client to detect duplicate responses, whether the server previously downloaded the transaction.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

Other information about an open order (at most one).

This property is an optional field. When calling the GetStatement method, if the server's response does not contain this value, querying the property will return an empty string.

Type for general open order aggregate. The open order types and their meanings are as follows:

Special restriction on the open order. The possible values are: ALLORNONE, MINUNITS, NONE.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

Security ID for this open order.

This property consists of a naming standard followed by a semicolon and a 9-character identifier. The naming standard identifies the method used for assigning the identifier ("CUSIP" in the US) and is unique within the indicated naming standard. This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

Type of sale. Possible values are: SELL, SELLSHORT.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

This identifies the type of a sub-account.

Many Financial Institutions (FIs) distinguish between activity and positions in cash, margin, and short accounts, with some FIs having many other types of 'sub-accounts'. Open Financial Exchange (OFX) defines four standard sub-account types: CASH, MARGIN, SHORT, and OTHER.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

A description of the open order type. This is a string representation of the value returned by the OOType property.

The types and their meanings are as follows:

Quantity of the security the open order is for.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

What the units represent. Possible values are: SHARES and CURRENCY.

This property is always returned with the open order information if such an information is requested to be included (IncludeOpenOrders was set to True) in the investment statement download request (when calling the GetStatement method).

Indicates the type of sub-account where the position is held in. Possible values are: CASH, MARGIN, SHORT, OTHER.

This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

Wrapper for a position information.

This aggregate contains properties relevant to all investment position types, as well as those specific to a given position type.

Aggregates are pieces of XML taken from the financial institution's original response. They contain elements that correspond to many of the component's properties. However, some of these elements, and/or their potential values, may not be supported by the component. Any user who wishes to use unsupported fields may use this aggregate property to parse out the desired data either via our OFXAggregate component or any other means.

Note: The original data from the server is returned as SGML or XML (depending on the value of OFXVersion that FI supports. If the original data is returned in SGML format, the component internally manipulates these responses into the equivalent XML format by inserting close element tags (e.g., "</ACCTID>") into the data as it comes from the server.

Date and time of unit price and market value. Can be 0 if unit price and market value are unknown.

All input dates should be entered in the format specified by DateFormat. For example, if the DateFormat is set to "MM/dd/yyyy hh:mm:ss" (default value), an input date should look like: 09/30/2009 12:00:00 AM.

This format specifies also how the returned dates are going to get parsed.

This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

Current market value of this position.

This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

Memo regarding this position.

This property is an optional field. When calling the GetStatement method, if the server's response does not contain this value, querying the property will return an empty string.

Indicates position type for the given sub-account where this position takes place. Each statement response must contain a complete set of position records, even if no transactions occurred in the requested statement period for a particular holding.

Possible values are: SHORT (Writer for options, Short for all others) and LONG (Holder for options, Long for all others). For options, position type SHORT is equivalent to WRITING an option, and position type LONG is equivalent to HOLDING an option.

For security types where there is only one type (for example, bonds), LONG is used.

This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

Type for general position aggregate. The positions types and their meanings are as follows:

The security ID for this position.

This property consists of a naming standard followed by a semicolon and a 9-character identifier. The naming standard identifies the method used for assigning the identifier ("CUSIP" in the US) and is unique within the indicated naming standard. This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

A description of the position type. This is a string representation of the value returned by the PosType.

The types and their meanings are as follows:

Unit price. Depending on the type of sub-account where this position takes place, this indicates the following:

This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

Quantity of positions. Depending on the type of sub-account where this position takes place, this indicates the following:

This property is always returned with the positions information if such an information is requested to be included (IncludePositions was set to True) in the investment statement download request (when calling the GetStatement method).

Wrapper for security information.

The value of this property is returned by the server when the investment statement download contains positions, transactions, or open orders.

The Aggregate contains information about security referenced in the investment statement download. Clients are completely dependent on the security list to provide descriptive information for the securities referenced in positions, transactions, and open orders.

These aggregates define the type of security, and one or more sets of descriptive information.

Aggregates are pieces of XML taken from the financial institution's original response. They contain elements that correspond to many of the component's properties. However, some of these elements, and/or their potential values, may not be supported by the component. Any user who wishes to use unsupported fields may use this aggregate property to parse out the desired data either via our OFXAggregate component or any other means.

Note: The original data from the server is returned as SGML or XML (depending on the value of OFXVersion that FI supports. If the original data is returned in SGML format, the component internally manipulates these responses into the equivalent XML format by inserting close element tags (e.g., "</ACCTID>") into the data as it comes from the server.

Asset Class for the security (at most one). The possible values and their meanings are as follows:

Transaction Id assigned by the financial institution.

This is a unique id number that the financial institution uses to identify a particular transaction. Its primary purpose is to allow a client to detect duplicate responses, whether the server previously downloaded the transaction.

This is a character string up to 32 octets long.

Memo regarding this security. This value is optional.

Full name of the security. The name can be up to 120 characters long.

The type of security. This is a string representation of the value returned by the SecType property.

The security types and their meanings are as follows:

Security identifier.

This property consists of a naming standard followed by a semicolon and a 9-character identifier. The naming standard identifies the method used for assigning the identifier ("CUSIP" in the US) and is unique within the indicated naming standard.

Ticker symbol of the security. The value can be up to 32 characters long.

A description of the security type. This is a string representation of the value returned by the SecType property.

The types and their meanings are as follows:

This is the current unit price of the security as provided by the server. It may be a real-time or delayed quote. The delay amount is determined by the data provider.

Current yield reported as portion of the fund's assets (at most one). This can be returned in the server reply only when SecType is stMFINFO or stSTOCKINFO.

OFX Config Settings

This credential is provided to the user out of band.

In the profile response, if AuthTokenFirst is True, then AuthToken should be sent in the very first signon.

In the profile response, if ClientUIdReq is True, then ClientUId should be set and included in all future requests.

If present in the list of transactions response, this represents the action taken to a previously sent transaction that is corrected by this record. Possible values are: REPLACE or DELETE. REPLACE replaces the transaction that it corrects referenced by CorrectFITID[i];. DELETE deletes it. This is applicable to statement download components only.

If present in the list of transactions response, this represents the FITID of a previously sent transaction that is corrected by this record. Based on the value of CorrectAction[i];, this transaction replaces or deletes the transaction that it corrects. This is applicable to statement download components only.

If this is set to a non-empty string, the component will attempt to use the value as a pattern to format all currency strings returned from the server. You may use any of the system's default number formatting strings.

This format is used for input and output dates. You may use any of the system's default date formatting strings.

When submitting the request: all your input dates should be entered in a format specified by DateFormat and the component will convert those to OFXDateFormat right before sending the request.

For example, if you set a date to '2000.01.01' (by first setting the DateFormat to 'yyyy.MM.dd'), for a EST timezone, the component will convert it to '20000101000000.000[-5:EST]' (format specified by OFXDateFormat).

When parsing the response: if DateFormat is set to a non-empty string, the component will attempt to use the value as a pattern to format all date strings as they are returned. Otherwise, the system's default value will be used for formatting.

If the DateFormat is set to the special value "OFXDATE": During input:, any values you supply to date properties are passed to the server directly with no changes; During output: all dates will be returned in the OFX format as it was provided by the server without performing any modifications.

Any additional response information contained within the OFX response that is not available via the Response fields, may be retrieved with this GetResponseVar config.

To obtain a response value, pass the XPath to the value you wish to receive. For instance, if the OFX response contains: "<OFX><SIGNONMSGSRSV1><SONRS><STATUS><CODE>0<SEVERITY>INFO</STATUS><DTSERVER>20120104223836.575<LANGUAGE>ENG"

Then calling GetResponseVar("/OFX/SIGNONMSGSRVSV1/LANGUAGE") will return "ENG".

Setting NewPassword to a non-empty value will cause the component to issue a password change request during sign-on along with the regular current OFX request. After the request is sent, this value will be cleared.

The correct current password is needed as well during signon request and must be supplied through the OFXPassword. Upon successful reply from the server, the NewPassword used becomes the new password.

Most of OFX FI servers, accept the default format, where the offset (G) and timezone (Z) are specified. However, there might still be some servers that do not accept that part. In such cases, you will have to set the OFXDateFormat to "YYYYMMddHHmmss.xxx" and GMT will be assumed as the default value.

Your input dates should be entered in a format specified by DateFormat and the component will convert those to OFXDateFormat (format that OFX FI server recognizes) right before sending the request.

For example, if you set a date to '2000.01.01' (by first setting the DateFormat to 'yyyy.MM.dd'), for a EST timezone, the component will convert it to '20000101000000.000[-5:EST]' (format specified by OFXDateFormat).

This setting records the OFX communication, but without including HTTP headers, to a file.

Please note that ReadOFXDataFile will not be able to parse this file because of the OFX request content present. If only the response of the server is required, please look at the WriteOFXDataFile method instead.

When sending a transaction request to a FI, their server with return either a successful reply or an error. However, even when a transaction is successful, a warning or other server messages might still be returned and are to be treated as informational notes only.

In the profile response, if UserCred1Q is present, then UserCred1A should be set (as the answer to question identified by UserCred1Q) and it should be included in all future requests as part of the signon.

In the profile response, if UserCred2Q is present, then UserCred2A should be set (as the answer to question identified by UserCred2Q) and it should be included in all future requests as part of the signon.

HTTP Config Settings

When AllowHTTPCompression is True, the component adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The component only supports gzip and deflate decompression algorithms.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the component will accept compressed data. It then will uncompress the data it has received. The component will handle data compressed by both gzip and deflate compression algorithms.

When True, the component adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the component will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the component raises an exception if the server does not support HTTP/2.

The default value is True.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP component can be extended with other security schemes in addition to the authorization schemes already implemented by the component.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form 'Basic [encoded-user-password]'.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

If set to True, the URL passed to the component will be URL encoded. The default value is False.

This option determines what happens when the server issues a redirect. Normally, the component returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the component raises an exception.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the component raises an exception instead.

Following are the valid options:

• 0 - Never
• 1 - Always
• 2 - Same Scheme

The default value is False. If set to True, the component will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

This property specifies the HTTP version used by the component. Possible values are as follows:

• "1.0"
• "1.1" (default)
• "2.0"
• "3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the component will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

If True, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. You also may explicitly add the Keep-Alive header to the request headers by setting OtherHeaders to Connection: Keep-Alive. If False, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is False.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

When FollowRedirects is set to any value other than frNever, the component will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the component will fall back to using "1.1" automatically. This setting will indicate which version was used.

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ('#13#10') .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the component beyond what is provided.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If User and Password are specified, this value is calculated using the algorithm specified by AuthScheme.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

This configuration setting returns the complete set of raw headers as sent by the client.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

This configuration setting contains the contents of the last response from the server.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the component.

This configuration setting returns the complete set of raw headers as received from the server.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

If UseChunkedEncoding is set to True, the component will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the component will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.

This configuration specifies whether the component will attempt to use the Proxy auto-config URL when establishing a connection and AutoDetect is set to True.

When True (default), the component will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

The appropriate values are as follows:

Note: This setting is provided for use by components that do not directly expose Firewall properties.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

SSL Config Settings

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

If set to true, the component will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the component is the same.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

This setting specifies whether the component will use OCSP to check the validity of the server certificate. If set to 1 or 2, the component will first obtain the OCSP URL from the server certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the component will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

• CALG_3DES
• CALG_3DES_112
• CALG_AES
• CALG_AES_128
• CALG_AES_192
• CALG_AES_256
• CALG_AGREEDKEY_ANY
• CALG_CYLINK_MEK
• CALG_DES
• CALG_DESX
• CALG_DH_EPHEM
• CALG_DH_SF
• CALG_DSS_SIGN
• CALG_ECDH
• CALG_ECDH_EPHEM
• CALG_ECDSA
• CALG_ECMQV
• CALG_HASH_REPLACE_OWF
• CALG_HUGHES_MD5
• CALG_HMAC
• CALG_KEA_KEYX
• CALG_MAC
• CALG_MD2
• CALG_MD4
• CALG_MD5
• CALG_NO_SIGN
• CALG_OID_INFO_CNG_ONLY
• CALG_OID_INFO_PARAMETERS
• CALG_PCT1_MASTER
• CALG_RC2
• CALG_RC4
• CALG_RC5
• CALG_RSA_KEYX
• CALG_RSA_SIGN
• CALG_SCHANNEL_ENC_KEY
• CALG_SCHANNEL_MAC_KEY
• CALG_SCHANNEL_MASTER_HASH
• CALG_SEAL
• CALG_SHA
• CALG_SHA1
• CALG_SHA_256
• CALG_SHA_384
• CALG_SHA_512
• CALG_SKIPJACK
• CALG_SSL2_MASTER
• CALG_SSL3_MASTER
• CALG_SSL3_SHAMD5
• CALG_TEK
• CALG_TLS1_MASTER
• CALG_TLS1PRF

• TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
• TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
• TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
• TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
• TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
• TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
• TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
• TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
• TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_DES_CBC_SHA
• TLS_DHE_RSA_WITH_DES_CBC_SHA
• TLS_DHE_DSS_WITH_DES_CBC_SHA
• TLS_RSA_WITH_RC4_128_MD5
• TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

• TLS_AES_256_GCM_SHA384
• TLS_CHACHA20_POLY1305_SHA256
• TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the component will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

• The platform provider is only available on Windows 11 / Windows Server 2022 and up.
• SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
• If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is True by default, but can be set to False to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

Returns the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

Returns the strength of the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

Returns the ciphersuite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

This functionality is currently not available when the provider is OpenSSL.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component raises an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448"
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1"
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096"
• "ffdhe_6144"
• "ffdhe_8192"

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

• "ed25519" (default)
• "ed448" (default)
• "ecdsa_secp256r1_sha256" (default)
• "ecdsa_secp384r1_sha384" (default)
• "ecdsa_secp521r1_sha512" (default)
• "rsa_pkcs1_sha256" (default)
• "rsa_pkcs1_sha384" (default)
• "rsa_pkcs1_sha512" (default)
• "rsa_pss_sha256" (default)
• "rsa_pss_sha384" (default)
• "rsa_pss_sha512" (default)

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448" (default)
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096" (default)
• "ffdhe_6144" (default)
• "ffdhe_8192" (default)

Socket Config Settings

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

When queried, this setting will return a string containing information about the product's build.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

The following is a list of valid code page identifiers for Mac OS only:

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

• Product: The product the license is for.
• Product Key: The key the license was generated from.
• License Source: Where the license was found (e.g., RuntimeLicense, License File).
• License Type: The type of license installed (e.g., Royalty Free, Single Server).
• Last Valid Build: The last valid build number for which the license will work.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to True to mask sensitive data. The default is True.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

When set to False, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this setting to True tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to False by default on all platforms.