AdjustInventory Component

Properties   Methods   Events   Config Settings   Errors  

The AdjustInventory component is used to adjust your inventory.

Syntax

TiqbAdjustInventory

Remarks

The AdjustInventory component is used to adjust your current inventory levels within QuickBooks by sending an Inventory Adjustment transaction. This component does not directly manipulate inventory items, but rather it sends and retrieves Inventory Adjustment transactions. Each Inventory Adjustment Transaction that is added to or retrieved from QuickBooks may contain one or more Adjustment Line Items. Each adjustment line is represented by a number of properties, each prefixed by "Adjustment". Any number of different inventory items may added to the Adjustment Line Items by simply increasing the AdjustmentCount and setting the Adjustment properties for each AdjustmentIndex.

When you have all the inventory items added to the Adjustment Line Items properties, set the AccountName and you can then Add the transaction to QuickBooks. Please note that only pre-existing inventory items may be adjusted. To add, get, or modify existing inventory items, please use the Item Component.

Required Fields (Add): AccountId or AccountName, and at least one Inventory Item (ItemId or ItemName), plus an NewQuantity and/or NewValue.

Supported Methods:Add, Get (Id), Cancel, Delete

Example component.AccountName = "Inventory Asset" '* component.Memo = "Small warehouse fire." component.AdjustmentCount = 1 component.AdjustmentItemName(0) = "Hardware:Brass Hinges" '* component.AdjustmentItemNewQuantity(0) = "130" component.Add() '*: Item must already exist in QuickBooks.

Note: The QuickBooks company file must be open in single-user mode. You cannot adjust the inventory while the company file is open in multi-user mode. Also, the QuickBooks Inventory Adjustment form must not be open, or you will receive an error.

The AdjustInventory component supports a variety of other operations as well. The component's Get, Cancel, and Delete methods may be used to retrieve, cancel, and delete Inventory Adjustment transactions. The ObjSearch Component may be used to search for Inventory Adjustments in the QuickBooks database.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AccountId	Reference to account from which funds are being drawn.
AccountName	Reference to account from which funds are being drawn.
Adjustments	Number of adjustments for this transaction.
ClassId	Reference to the class of the Inventory Adjustment.
ClassName	Reference to the class of the Inventory Adjustment.
CustomerId	A reference to the customer or customer job.
CustomerName	A reference to the customer or customer job.
Memo	Memo to appear on internal reports only.
QBConnectionString	An aggregate consisting of various QuickBooks connection properties.
QBRequestAggregate	The request aggregate.
QBRequestId	The Id of the next message to be sent to QuickBooks.
QBRequestMode	Defines whether the request is made online or stored offline.
QBResponseAggregate	The last QBXML response aggregate received from QuickBooks.
QBXMLVersion	The version of QBXML used in the outgoing message.
RefId	An alphanumerical identifier generated by the server.
RefNumber	Reference number for the transaction.
TransactionDate	Date of transaction.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Add	Adds the Inventory Adjustment into QuickBooks.
Cancel	Cancels (voids) the transaction.
CheckRequestStatus	Checks whether or not the specified request was processed by QuickBooks.
CloseQBConnection	Closes a persistent connection to QuickBooks.
Config	Sets or retrieves a configuration setting.
Delete	Deletes the record from QuickBooks.
Get	Gets a single record from QuickBooks.
GetCustomField	Gets a custom field value from QuickBooks.
ImportQBXML	Imports a QBXML response aggregate.
OpenQBConnection	Opens a persistent connection to QuickBooks.
Reset	Resets all properties to their defaults.
SetCustomField	Sets a custom field value within QuickBooks.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Error	Information about errors during data delivery.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Shows the progress of the secure connection.
Status	Shows the progress of the QuickBooks connection.
Warning	Fired when a warning occurs.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

Adjustments[i].NewQuantity	Used to set the AdjustmentNewQuantity at index i as a string.
Adjustments[i].QuantityDifference	Used to set the AdjustmentQuantityDifference at index i as a string.
AppendAfter	Appends an XML tag after the specified QBXML element.
AuthFlags	Connection Flags (use for QuickBooks Simple Start).
EditSequence	An identifier for this copy of the object.
EnforceMaxLength	Indicates whether to enforce max lengths for QB Fields.
GetHighestVersion	Highest QBXMLVersion supported by the installed instance of QuickBooks.
GetRequestProcessorDLLVersion	Returns the version of the QB Request Processor that is installed on your system.
GetSupportedVersions	Returns a list of QBXMLVersions that are supported by QuickBooks.
IsReadOnly	This causes the QuickBooks authorization dialog to display text informing the user that its access will be read-only.
PersonalDataPref	Whether the connecting application will require access to personal data such as SSN or credit card information.
QBConnectionMode	The mode of connection to QuickBooks.
QBFileStatus	The status of the company file as it pertains to accepting connections.
QBOpenCompanyFile	The file currently open in QuickBooks.
SendRawXML	Sends specified XML to quickbooks without modification.
SSLAcceptServerCert	The SSL certificate being used by the QuickBooks Gateway (aka Remote Connector).
SSLAcceptServerCertFile	The SSL certificate file being used by the QuickBooks Gateway (aka Remote Connector).
StopOnError	Specifies how QuickBooks is to proceed if an error occurs in processing of the current request.
TimeCreated	The time the object was created.
TimeModified	The time the object was created.
UnattendedModePref	Whether connecting while QuickBooks is closed is required or optional for the user.
UpdateAdjustInventory	Updates the inventory adjustment in QuickBooks.
WarningCodes	A comma-separated list of QuickBooks warning codes that should not result in an exception.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Tells the component whether or not to use the system security libraries or an internal implementation.

AccountId Property (AdjustInventory Component)

Reference to account from which funds are being drawn.

Syntax

property AccountId: String read get_AccountId write set_AccountId;

Default Value

''

Remarks

A reference to an Expense or Income account from which the Inventory Adjustment affects. For example, "Inventory Asset". Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string. This property is required.

AccountName Property (AdjustInventory Component)

Reference to account from which funds are being drawn.

Syntax

property AccountName: String read get_AccountName write set_AccountName;

Default Value

''

Remarks

A reference to an Expense or Income account from which the Inventory Adjustment affects. For example, "Inventory Asset". Name/Id Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its full Name (this property) or its Id, for which a corresponding property is defined. If Name is used, it must contain the full name of the object referred to, as generated by QuickBooks. For hierarchically defined objects, such as Customers, this includes the names of parent objects, and the full name can be determined by reading the FullName special field.

Setting the value of this property will set the corresponding Id property to an empty string. This property is required.

Adjustments Property (AdjustInventory Component)

Number of adjustments for this transaction.

Syntax

property Adjustments: TiqbAdjustmentList read get_Adjustments write set_Adjustments;

Remarks

This property contains a collection of individual inventory adjustments.

This property is not available at design time.

ClassId Property (AdjustInventory Component)

Reference to the class of the Inventory Adjustment.

Syntax

property ClassId: String read get_ClassId write set_ClassId;

Default Value

''

Remarks

A reference to the class of this InventoryAdjustment. Used if class tracking is being done with the QuickBooks company.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

ClassName Property (AdjustInventory Component)

Reference to the class of the Inventory Adjustment.

Syntax

property ClassName: String read get_ClassName write set_ClassName;

Default Value

''

Remarks

A reference to the class of this InventoryAdjustment. Used if class tracking is being done with the QuickBooks company.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

CustomerId Property (AdjustInventory Component)

A reference to the customer or customer job.

Syntax

property CustomerId: String read get_CustomerId write set_CustomerId;

Default Value

''

Remarks

The Customer property indicates the Customer who has purchased goods or services from the company.

Id/Name Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its Id (this property) or its full Name, for which a corresponding property is defined.

Using the Id is recommended when feasible, as the Id is guaranteed to never change once defined.

Setting the value of this property will set the corresponding Name property to an empty string.

Either CustomerId or CustomerName is required.

CustomerName Property (AdjustInventory Component)

A reference to the customer or customer job.

Syntax

property CustomerName: String read get_CustomerName write set_CustomerName;

Default Value

''

Remarks

The Customer property indicates the Customer who has purchased goods or services from the company.

Name/Id Reference Properties

This property is used to reference an object that is already done within QuickBooks. This may be done with its full Name (this property) or its Id, for which a corresponding property is defined. If Name is used, it must contain the full name of the object referred to, as generated by QuickBooks. For hierarchically defined objects, such as Customers, this includes the names of parent objects, and the full name can be determined by reading the FullName special field.

Setting the value of this property will set the corresponding Id property to an empty string.

Either CustomerId or CustomerName is required.

Memo Property (AdjustInventory Component)

Memo to appear on internal reports only.

Syntax

property Memo: String read get_Memo write set_Memo;

Default Value

''

Remarks

A memo to appear on internal reports. Will not appear to customers, vendors, etc.

QBConnectionString Property (AdjustInventory Component)

An aggregate consisting of various QuickBooks connection properties.

Syntax

property QBConnectionString: String read get_QBConnectionString write set_QBConnectionString;

Default Value

''

Remarks

QBConnectionString allows the user to customize the application's interaction with QuickBooks.

The connection properties should be formatted in a sequence as follows:

propertyname = "propertyvalue" propertyname = "propertyvalue" ...

The order is irrelevant, and the whitespace around the equal sign is optional.

The following properties are currently supported:

ApplicationName	The name of the developer's application. This name will appear when the application first connects to QuickBooks; QuickBooks will display this name and prompt the user to grant or refuse access.
CompanyFile	The name of the company file to open. If QuickBooks is not currently open with a company file, QuickBooks will be automatically opened in the background with the file specified. Do not set CompanyFile when QuickBooks is open; if QuickBooks is open through the application UI, only that company file may be used. This setting is not applicable when communicating with QB Connector.
URL	The URL for the Remote Connector, e.g., 'http://localhost:2080'. If the URL is specified, the component will not communicate directly with QuickBooks, and will instead send a request to the specified web address. QuickBooks and the Remote Connector should be installed at the remote location, and if the connector is listening on the specified port, it will communicate the component's request to QuickBooks, and return the response.
User	A username for the Remote Connector connection (if required on the Connector side)
Password	A password for the Remote Connector connection (if required on the Connector side)
Timeout	A timeout, in seconds, for the Remote Connector connection. If the Connector does not finish and respond within the chosen length of time, the component will generate an exception instead of hanging.
DelayAfterClose	A delay, in milliseconds, to be applied after each time a connection to QuickBooks is closed. If QuickBooks is generating internal errors (in particular with automatic login) setting this delay to a positive value may solve the problem.
FirewallHost	Contains the name or IP address of firewall. If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.
FirewallPassword	Contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword configs are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.
FirewallPort	Contains the TCP port for the firewall FirewallHost. Note this is set automatically when FirewallType is set to a valid value.
FirewallType	Determines the type of firewall to connect through. Supported values are: 0 - no firewall (default), 1 - Tunneling proxy, 2 - SOCKS4 proxy, and 3 - SOCKS5 proxy. For the Tunneling proxy (1), the FirewallPort defaults to 80. For SOCKS4 (2) and SOCKS5 (3) the FirewallPort defaults to 1080.
FirewallUser	Contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, the FirewallUser and FirewallPassword configs are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.
ProxyAuthorization	Supported values are 0 - Basic authorization, 1 - Digest authentication, 3 - No authentication, and 4 - NTLM authentication.
ProxyPassword	Contains a password if authentication is to be used for the proxy.
ProxyPort	Contains the TCP port for a ProxyServer; (default 80).
ProxySSL	Determines when to use SSL for the connection to the proxy. The applicable values are 0 - Automatic (SSL for https URLs, non-SSL for http URLs), 1 - The connection is always SSL-enabled, 2 - SSL is not enabled for any connection, and 3 - Connection is through a tunneling proxy.
ProxyServer	If a ProxyServer is specified, then the HTTP request is sent to the proxy instead of the server otherwise specified. If the ProxyServer is set to a Domain Name, a DNS request is initiated and upon successful termination of the request, the ProxyServer is set to the corresponding address. If the search is not successful, an error is returned.
ProxyUser	Contains a user name, if authentication is to be used for the proxy.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	The TCP port in the local host where the component binds.
UseRDS	Whether to connect using Remote Data Sharing (RDS). If set to True, the component will attempt to connect using the RDS client installed on the machine. The RDS client and server must be configured separately. The default value is False.

QBRequestAggregate Property (AdjustInventory Component)

The request aggregate.

Syntax

property QBRequestAggregate: String read get_QBRequestAggregate write set_QBRequestAggregate;

Default Value

''

Remarks

This property will be populated when QBRequestMode is set to rmOffline and a method is called. This is used when working with the QBWCServer component to generate requests to be sent to QuickBooks Web Connector.

This property is not available at design time.

QBRequestId Property (AdjustInventory Component)

The Id of the next message to be sent to QuickBooks.

Syntax

property QBRequestId: String read get_QBRequestId write set_QBRequestId;

Default Value

''

Remarks

The next message Id to be sent to QuickBooks. Message Id's are used by CheckRequestStatus to check on the status of previously made requests.

This property allows the user to determine whether a previous request was successfully processed by QuickBooks. Ordinarily QuickBooks either processes requests successfully or returns an error, but in the event of a power outage or other system failure, QuickBooks might or might not have time to process a request before issuing a response.

QuickBooks stores internally a list of QBRequestIds for which it has processed a request, and updated its internal state accordingly. Use of this property in conjunction with CheckRequestStatus allows the user to query this internal list.

To enable error recovery, the user application should store the value of QBRequestId before submitting a request to QuickBooks. If a system failure occurs, CheckRequestStatus should be called with this value of QBRequestId to find whether the request was processed before the system failed.

Unique values for QBRequestId will be generated on startup and after each request to QuickBooks. The automatically generated value may be overwritten by the user. Error checking may be turned off by setting QBRequestId equal to the empty string. See CheckRequestStatus for more information on error recovery.

This property is not available at design time.

QBRequestMode Property (AdjustInventory Component)

Defines whether the request is made online or stored offline.

Syntax

property QBRequestMode: TiqbQBRequestModes read get_QBRequestMode write set_QBRequestMode;

TiqbQBRequestModes = (
  rmOnline,
  rmOffline
);

Default Value

rmOnline

Remarks

This property defines the behavior of the component when calling a method. Possible values are:

0 (rmOnline - default)	The request is made normally.
1 (rmOffline)	The request is generated but not sent, and QBRequestAggregate is populated.

The use of offline mode is required when using the QBWCServer component. This allows requests to be generated and passed to QuickBooks Web Connector through the QBWCServer component.

For normal communication to QuickBooks either directly or through the QBConnector application use the default online mode.

QBResponseAggregate Property (AdjustInventory Component)

The last QBXML response aggregate received from QuickBooks.

Syntax

property QBResponseAggregate: String read get_QBResponseAggregate write set_QBResponseAggregate;

Default Value

''

Remarks

The last QBXML response aggregate received from QuickBooks. This property is set whenever a response is received from QuickBooks.

This property may also be set to a response aggregate. When set to a QBXML aggregate, such as a response from ObjSearch or QBWCServer the component will parse the response as if it had been received directly from QuickBooks and the applicable properties will be updated.

This property is not available at design time.

QBXMLVersion Property (AdjustInventory Component)

The version of QBXML used in the outgoing message.

Syntax

property QBXMLVersion: String read get_QBXMLVersion write set_QBXMLVersion;

Default Value

'3.0'

Remarks

The version of QBXML used in the outgoing message. Except as noted in the documentation, a value of "1.1" will suffice for all requests, and for all versions of QuickBooks which support integrated applications.

With each release of QuickBooks since 2002, a corresponding version of the QuickBooks SDK has also been released: 1.0 for QuickBooks 2002, 2.0 for QuickBooks 2003, 3.0 for QuickBooks 2004, etc., up to 8.0 for QuickBooks 2009. In addition, each release of QuickBooks continues to support all earlier versions of the SDK, meaning that requests using version 1.1 of the QuickBooks SDK are supported by all versions of QuickBooks. However, new requests and newer fields in existing requests are only supported in later versions of the QuickBooks SDK. As such, it is recommended that you set the QBXMLVersion property to correspond to the version of QuickBooks you are interacting with. These values are:

QuickBooks 2002	1.0, 1.1
QuickBooks 2003	2.0
QuickBooks 2004	3.0
QuickBooks 2005	4.0, 4.1
QuickBooks 2006	5.0
QuickBooks 2007	6.0
QuickBooks 2008	7.0
QuickBooks 2009	8.0
QuickBooks 2010	9.0
QuickBooks 2011	10.0
QuickBooks 2012	11.0
QuickBooks 2013	12.0
QuickBooks 2014	13.0
QuickBooks 2015	14.0
QuickBooks 2016	15.0

In addition, versions of QuickBooks outside of the U.S. released before Quickbooks 2008 adhere to a different version of the QuickBooks SDK. These versions were updated with less frequency than the U.S. SDK, and may omit features introduced in later releases:

QuickBooks Canadian 2003	CA2.0
QuickBooks Canadian 2004 to 2007	CA3.0
QuickBooks UK 2003	UK2.0
QuickBooks UK 2004 to 2007	UK3.0
QuickBooks Australian 2003	OZ2.0
QuickBooks Australian 2004 to 2007	AU3.0

With the exception of Province in Address (set State) or EligibleForT4A in Vendor (set EligibleFor1099), Canadian-only fields are read-only and may be accessed with Config.

This property is not available at design time.

RefId Property (AdjustInventory Component)

An alphanumerical identifier generated by the server.

Syntax

property RefId: String read get_RefId;

Default Value

''

Remarks

An Id is an alphanumerical identifier assigned by the server whenever an object is added to QuickBooks. It is guaranteed to be unique across all objects of the same type.

This property is read-only and not available at design time.

RefNumber Property (AdjustInventory Component)

Reference number for the transaction.

Syntax

property RefNumber: String read get_RefNumber write set_RefNumber;

Default Value

''

Remarks

This is the reference number assigned to a transaction. Depending on the type of transaction, it appears in the QuickBooks user interface as Bill Number, Invoice Number, etc.

Reference numbers are alphanumeric strings and are not limited to actually being numbers.

For some types of transactions, if RefNumber is not assigned, QuickBooks will automatically assign a unique one. Reference numbers should generally be unique, but are not guaranteed to be so. It is recommended that applications generating their own reference numbers take steps to ensure their uniqueness.

TransactionDate Property (AdjustInventory Component)

Date of transaction.

Syntax

property TransactionDate: String read get_TransactionDate write set_TransactionDate;

Default Value

''

Remarks

The date of the transaction.

The standard formatting for dates is YYYY-MM-DD; i.e., September 2, 2002 is formatted as 2002-09-02. When getting the value of a date property, the date will always be in this format.

When setting the value of a date property, the formats MM-DD-YY, MM-DD-YYYY, MM/DD/YY, and MM/DD/YYYY are also acceptable. Dates in these formats will be automatically parsed and stored in YYYY-MM-DD format.

This property is required in Accounts Payable (Bill and VendorCredit) transactions. In other kinds of transactions this property is optional.

Add Method (AdjustInventory Component)

Adds the Inventory Adjustment into QuickBooks.

Syntax

procedure Add();

Remarks

Add is used to add an Inventory Adjustment transaction into to QuickBooks.

If QuickBooks is able to add the Inventory Adjustment, it will return a copy of the adjustment, and the values of all properties will be reset from the QuickBooks response. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

Please note that this component is adding an inventory adjustment transaction into QuickBooks. This is fundamentally different from modifying an inventory item. QuickBooks does not allow the direct manipulation of inventory item quantities or values, but rather it maintains a history of the transactions that modify the inventory items.

Furthermore, these transactions record only the difference in value or quantity that was added or removed. Current and previous quantities and values for inventory items are not recorded or returned. Only the difference is recorded. Please see the QuantityDifference and ValueDifference properties for more information.

If QuickBooks is not able to add the Inventory Adjustment, the component will raises an exception.

Cancel Method (AdjustInventory Component)

Cancels (voids) the transaction.

Syntax

procedure Cancel();

Remarks

Cancel causes the transaction to be voided in QuickBooks. The amount of the transaction and all line item quantities are changed to zero, and the memo is changed to "VOID:". The transaction will not, however, be deleted.

The transaction canceled in QuickBooks is the one specified by RefId. If the value of RefId is known then Get should first be called to retrieve the transaction. Otherwise the ObjSearch component should be used to search for the desired transaction in the QuickBooks database.

As the QuickBooks response to Cancel does not include the updated transaction, the values of all properties are instead set to their defaults. To get a copy of the updated transaction, the value of RefId should first be stored, and then Get should be called.

CheckRequestStatus Method (AdjustInventory Component)

Checks whether or not the specified request was processed by QuickBooks.

Syntax

function CheckRequestStatus(RequestId: String): String;

Remarks

This method allows the user to determine whether a previous request was successfully processed by QuickBooks. Ordinarily QuickBooks either processes requests successfully or returns an error, but in the event of a power outage or other system failure, QuickBooks might or might not have time to process a request before issuing a response.

QuickBooks stores internally a list of QBRequestIds for which it has processed a request, and updated its internal state accordingly. Use of this method allows the user to query the list for any RequestId whose value is known.

The method returns a string corresponding to the result of the query. If the request was processed successfully, an empty string ("") will be returned. If the request was not processed, the string "Request not processed." will be returned. If the request was processed but an error occurred, a string containing the error code and a description will be returned; for example, "801: A QuickBooks internal error has occurred."

See QBRequestId for more information on error recovery.

CloseQBConnection Method (AdjustInventory Component)

Closes a persistent connection to QuickBooks.

Syntax

procedure CloseQBConnection();

Remarks

Invoking CloseQBConnection closes the QuickBooks connection specified in QBConnectionString. After the connection has been closed, the component will revert to its default behavior, and a new connection will be established for each request until QBConnectionString is invoked again.

In case the connection is already closed invoking CloseQBConnection will have no effect. Moreover, if multiple connections are open CloseQBConnection will only close the connection specified in QBConnectionString.

Be sure to always invoke this method after calling OpenQBConnection.

Config Method (AdjustInventory Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Delete Method (AdjustInventory Component)

Deletes the record from QuickBooks.

Syntax

procedure Delete();

Remarks

Delete causes the object to be deleted in QuickBooks. After this method is called, the values of all fields will be reset to their defaults.

The object deleted in QuickBooks is the one specified by RefId. This read-only property may be assigned either by calling Get or by assigning the value of QBResponseAggregate.

A typical example: Customer.GetByName("John Smith") 'this will assign the RefId Customer.Delete() Deleting entity objects (Customer, Employee, and Vendor) requires that QuickBooks be open in single-user mode. Transaction objects, however, may be deleted while QuickBooks is in any mode.

Use this method with caution, as there is no way to recover deleted objects.

Get Method (AdjustInventory Component)

Gets a single record from QuickBooks.

Syntax

procedure Get(Id: String);

Remarks

Get may be used to retrieve a single Inventory Adjustment transaction from QuickBooks, based on its RefId. When the method is called, a search will be initiated for the requested object. If it is found, all properties of the component will be set to the information retrieved from QuickBooks. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks.

Please note that this component is retrieving an inventory adjustment transaction from QuickBooks. This is fundamentally different from retrieving an inventory item. QuickBooks does not allow the direct manipulation of inventory item quantities or values, but rather it maintains a history of the transactions that modify the inventory items.

Therefore this Get operation takes the Id of a previous Inventory Adjustment Add, and returns all of the adjustments made in that transaction in the Adjustment line item properties. Any quantity or value differences for a particular inventory item will show up in the QuantityDifference and ValueDifference properties.

You can not set the Id parameter to the Id for an inventory item. This will result in an error. You must use the Item or ObjSearch components to retrieve inventory items.

GetCustomField Method (AdjustInventory Component)

Gets a custom field value from QuickBooks.

Syntax

function GetCustomField(FieldName: String): String;

Remarks

This method will get the value of a custom field, which has been defined by the user from within the QuickBooks UI.

To read the values of custom fields, be sure to set QBXMLVersion to at least "2.0" when retrieving data from QuickBooks. Then, QuickBooks will return custom field information, and it will be accessible through this method.

You may also invoke Config to read the value of custom fields. However, to set the value of custom fields you must set QBXMLVersion to at least "3.0" and invoke SetCustomField.

ImportQBXML Method (AdjustInventory Component)

Imports a QBXML response aggregate.

Syntax

procedure ImportQBXML(XMLData: String);

Remarks

This method imports a QBXML response aggregate. When called with a QBXML aggregate, such as a response from ObjSearch or QBWCServer the component will parse the response as if it had been received directly from QuickBooks and the applicable properties will be updated.

OpenQBConnection Method (AdjustInventory Component)

Opens a persistent connection to QuickBooks.

Syntax

procedure OpenQBConnection();

Remarks

Invoking OpenQBConnection will open a persistent connection to QuickBooks. After invoking OpenQBConnection, all requests such as Get, Add, etc. will use the established connection until CloseQBConnection is invoked.

The effect of OpenQBConnection is to increase performance. If OpenQBConnection is not invoked, a connection to QuickBooks will automatically be created and destroyed each time the component communicates with QuickBooks. Using OpenQBConnection will be faster, particularly in the case of automatic login.

After OpenQBConnection is invoked, QuickBooks will issue a connection ticket, and it will be stored in QBConnectionString. When CloseQBConnection is invoked the ticket will be invalidated, and any further attempts to use it will fail.

Be sure to invoke CloseQBConnection when you have finished communicating with QuickBooks. Leaving an open QuickBooks connection may lock out other integrated applications, affect QuickBooks performance, or cause other problems.

Reset Method (AdjustInventory Component)

Resets all properties to their defaults.

Syntax

procedure Reset();

Remarks

This method resets the values of all properties (and all special fields) to their defaults.

After calling this method, the component may be reused as if it were newly created.

SetCustomField Method (AdjustInventory Component)

Sets a custom field value within QuickBooks.

Syntax

procedure SetCustomField(FieldName: String; FieldValue: String);

Remarks

This method requires QuickBooks 2004 or above, with QBXMLVersion set to at least "3.0".

This method will immediately set the value of a QuickBooks custom field, which has been defined by the user from within the QuickBooks UI. Before calling this method, the preceding operation must retrieve the object from QuickBooks, using Get, ObjSearch, etc. Then, you may use SetCustomField to set custom field values (the fields will be modified or added, as appropriate).

Note that invoking this method will create a connection to QuickBooks if one is not already in place.

Error Event (AdjustInventory Component)

Information about errors during data delivery.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (AdjustInventory Component)

Fired after the server presents its certificate to the client.

Syntax

type TSSLServerAuthenticationEvent = procedure (
  Sender: TObject;
  CertEncoded: String;
  CertEncodedB: TBytes;
  const CertSubject: String;
  const CertIssuer: String;
  const Status: String;
  var Accept: Boolean
) of Object;

property OnSSLServerAuthentication: TSSLServerAuthenticationEvent read FOnSSLServerAuthentication write FOnSSLServerAuthentication;

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AdjustInventory Component)

Shows the progress of the secure connection.

Syntax

type TSSLStatusEvent = procedure (
  Sender: TObject;
  const Message: String
) of Object;

property OnSSLStatus: TSSLStatusEvent read FOnSSLStatus write FOnSSLStatus;

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Status Event (AdjustInventory Component)

Shows the progress of the QuickBooks connection.

Syntax

type TStatusEvent = procedure (
  Sender: TObject;
  const Message: String
) of Object;

property OnStatus: TStatusEvent read FOnStatus write FOnStatus;

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Warning Event (AdjustInventory Component)

Fired when a warning occurs.

Syntax

type TWarningEvent = procedure (
  Sender: TObject;
  Code: Integer;
  const Description: String
) of Object;

property OnWarning: TWarningEvent read FOnWarning write FOnWarning;

Remarks

The Warning event is fired when the component has produced, or will produce, possibly unexpected results.

Warnings may be generated by QuickBooks or the component. Starred warning codes correspond to warnings and warning codes generated by QuickBooks.

510*	Object added successfully, but cannot now be read.
520*	Insufficient permissions to get all data.
801	Unable to update field (name).
802	Unable to parse name.

Unlisted QuickBooks warnings will cause the component to throw an exception instead.

Warning 801 will be thrown if the user attempts to Update properties that cannot be updated. For example, the following code will cause this warning to be fired: Customer1.GetByName("Joe Smith") Customer1.Email = "joe@abc.com" 'ok Customer1.CreditLimit = "200.00" 'Not used in Update operations! Customer1.Update() Only the email address will be updated, and the credit limit will be unchanged. Each property description for entity objects lists whether or not it is used in Update operations.

Adjustment Type

Represents one line of an inventory adjustment.

Remarks

This type allows you to adjust the value or quantity of a single inventory item, using the AdjustInventory component.

Fields

ItemId String	Line item property: Reference to the kind of item to be adjusted. Adjustment Line items represent either quantity or value adjustments made on an inventory item. The ItemId or ItemName represent which inventory item the adjustment is acting on, and NewQuantity and NewValue properties are used to indicate how much you wish to change either the quantity or the value of the specified inventory item. ValueDifference and QuantityDifference will be filled after a successful Get or Add.
ItemName String	Line item property: Reference to the kind of item to be adjusted. Adjustment Line items represent either quantity or value adjustments made on an inventory item. The ItemId or ItemName represent which inventory item the adjustment is acting on, and NewQuantity and NewValue properties are used to indicate how much you wish to change either the quantity or the value of the specified inventory item. ValueDifference and QuantityDifference will be filled after a successful Get or Add.
LineId String	Identification number of the transaction line, returned in the response.
NewQuantity String	Line item property: The new quantity for this adjustment. When issuing an Inventory Quantity Adjustment or Value Adjustment, this is the new quantity for the inventory item indicated by ItemName and ItemId. Either NewQuantity and/or NewValue must be specified for each Adjustment, or the component will raises an exception. The default value of "" indicates that this property is not specified, and no new quantity will be sent.
NewValue String	Line item property: New value of this adjustment. The new total value of these inventory items (The new value does NOT have to equal QuantityOnHand times PurchaseCost). If this property is specified, the component will send a ValueAdjustment request for this line. The NewQuantity property may be set in conjunction with the NewValue property, and so long as NewValue is not empty, a ValueAdjustment request will be sent for this line. However, if NewValue is empty a QuantityAdjustment will be sent instead. Either NewQuantity and/or NewValue must be specified for each Adjustment, or the component will raises an exception. The default value of "" indicates that this property is not specified, and no new value will be sent.
QuantityDifference String	Line item property: The change in quantity for this adjustment. After a successful Add or Get this property will contain either a positive or negative number that shows the change in quantity for this inventory item.
ValueDifference String	Line item property: The change in total value for this adjustment. After a successful Add or Get, this read-only property will contain either a positive or negative number that shows a change in the total value of the entire stock of this inventory item.

Constructors

constructor Create();

Config Settings (AdjustInventory Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

AdjustInventory Config Settings

Adjustments[i].NewQuantity:   Used to set the AdjustmentNewQuantity at index i as a string. Used when a fractional or string-based quantity is necessary. For example, "1.5" lbs.

Adjustments[i].QuantityDifference:   Used to set the AdjustmentQuantityDifference at index i as a string. Used when a fractional or string-based quantity is necessary. For example, "1.5" lbs.

AppendAfter:   Appends an XML tag after the specified QBXML element. Write-only; Appends the specified text after the specified QBXML element (whether the QBXML element is present). This may be useful to extend the functionality of the component beyond what is provided. Example: Control1.Config("AppendAfter:ListID=<WeirdNewField>abc</WeirdNewField>")

AuthFlags:   Connection Flags (use for QuickBooks Simple Start). Since 2006, QuickBooks has allowed AuthFlags to be set before connecting to QuickBooks. By default, the component can connect to Pro, Premier, and Enterprise editions of QuickBooks. However, because QuickBooks Simple Start contains only a subset of the functionality that other desktop versions provide, Intuit does not allow COM connection to Simple Start unless these AuthFlags explicitly indicate you wish to support it. A list of allowable AuthFlags is provided below. "" or 0 Do not send any auth flags 0x01 Support QB Simple Start 0x02 Support QB Pro 0x04 Support QB Premier 0x08 Support QB Enterprise 0x80000000 Force Auth Dialog To specify support for multiple editions, OR together the values for each edition. NOTE: If the version of QuickBooks being used does not support AuthFlags, the contents of this config will be ignored. However, if QuickBooks does support this feature, setting "AuthFlags=1" (Support for Simple Start only) on a machine running QuickBooks 2013 Pro will result in an error message indicating that the Request Processor cannot be found.

EditSequence:   An identifier for this copy of the object. Indicates the state of an object when doing an Update.

EnforceMaxLength:   Indicates whether to enforce max lengths for QB Fields. If you change this setting to False, the component will no longer check (or error) when the length of a property exceeds the maximum length specified in the QuickBooks SDK.

GetHighestVersion:   Highest QBXMLVersion supported by the installed instance of QuickBooks. If QuickBooks is installed on the system, this setting will retrieve the highest QBXMLVersion that may be used for sending transactions to QuickBooks.

GetRequestProcessorDLLVersion:   Returns the version of the QB Request Processor that is installed on your system.

GetSupportedVersions:   Returns a list of QBXMLVersions that are supported by QuickBooks. If QuickBooks is installed on the system, this setting will retrieve a list of all supported QBXMLVersions that may be used for sending transactions to QuickBooks. While GetHighestVersion config returns only the highest QBXMLVersion supported, this config returns ALL supported QBXMLVersions. The list is delimited with '\n' (linefeed) characters.

IsReadOnly:   This causes the QuickBooks authorization dialog to display text informing the user that its access will be read-only. The default value is false.

PersonalDataPref:   Whether the connecting application will require access to personal data such as SSN or credit card information. This setting allows you to let the user know immediately whether your application requires access to personal data or not. A list of available values is provided below. pdpOptional Causes the QuickBooks authorization dialog to display a checkbox for user selection asking whether the user wants to allow the application to access personal data. pdpRequired Causes the QuickBooks authorization dialog to not display the personal information checkbox for user selection, and instead display a warning that the application needs to access personal data. pdpNotNeeded Causes the QuickBooks authorization dialog to not display the personal information checkbox for user selection, and instead display an informational message that the application will NOT access personal data. The default value is pdpOptional.

QBConnectionMode:   The mode of connection to QuickBooks. Specifies whether the integrated application logs in using single-user or multi-user mode. The following values are permitted: 0 Don't Care 1 Single-User Mode 2 Multi-User Mode About Single-User and Multi-User Modes If the connection to QuickBooks is made in single-user mode, QuickBooks will give exclusive access to the connecting application. It will lock out all other integrated applications; if QuickBooks and the company file are not already open in single-user mode by the QuickBooks user, the user will be locked out as well. If the connection is made in multi-user mode, QuickBooks will allow all other integrated applications access. QuickBooks end users on other machines will also be allowed to access the file. However, if the application (rather than the end user) starts QuickBooks automatically, end users on the same machine will still be locked out. If cmDontCare is specified, an appropriate connection mode will be chosen automatically. If a company file is open in either single-user or multi-user mode, the integrated application will accept that connection mode. If no company file is open, QuickBooks will login automatically in multi-user mode. About Integrated and Automatic Login Note that your application's login to QuickBooks might be either automatic or interactive. Interactive login is used when QuickBooks is already open. Access will be shared between the integrated application and the QuickBooks end user, and if multi-user mode is specified, other applications and users will have access as well. When a connection is made, QuickBooks will show a dialog window to the user, and ask the user if he/she wants to permit the connection. Automatic login is used when QuickBooks is not already open. QuickBooks will be opened in the background, and will run until your application has finished its connection with QuickBooks. The QuickBooks user interface will not be displayed, and end-users on the same machine will be locked out. End-users on other machines, however, will be allowed access if multi-user mode is specified. By default integrated applications do not have permission to login automatically. The first time an application interacts with QuickBooks, it must do so interactively, with QuickBooks and the company file open. The QuickBooks end user may then grant automatic login permission through Edit Preferences - Integrated Applications in the QuickBooks user interface. Click on the name of the application and then "Properties", and you may allow the application to login automatically. For automatic login the CompanyFile must be specified. CompanyFile, ApplicationName, and other properties relating to the QuickBooks connection may be edited through QBConnectionString.

QBFileStatus:   The status of the company file as it pertains to accepting connections. This setting may be queried before attempting to connect to QuickBooks to determine the current company file status. When queried the component will attempt to determine whether a subsequent connection using the provided QBConnectionString value would succeed. Possible return values are: 0 The company file will accept the connection. This indicates that no company file is open, or the desired company file is already open. 1 The company file will not accept the connection. This indicates a different company file is already open.

QBOpenCompanyFile:   The file currently open in QuickBooks. The name of the file currently open in QuickBooks, specified completely with the path. This field is read-only. A query is submitted to QuickBooks when the value of this property is read. The empty string will be returned if no file is open, if QuickBooks is open in an access mode incompatible with QBConnectionMode, or if an error occurs. If the value of this property is nonempty, the component may interact exclusively with the open file.

SendRawXML:   Sends specified XML to quickbooks without modification. Available for write only. Immediately sends the specified XML over the current or default QuickBooks connection (as specified elsewhere), and returns the QBXML response. Syntax: Control1.Config("SendRawXML=<?xml version="1.0" ?>...")

SSLAcceptServerCert:   The SSL certificate being used by the QuickBooks Gateway (aka Remote Connector). The Base-64 encoded certificate being used by the Remote Connector (you may get this certificate from the Remote Connector by going to the Security tab, and clicking Export.) This is only necessary if using a self-signed certificate, or any other certificate that has not been signed by a Certificate Authority (CA) trusted by the system.

SSLAcceptServerCertFile:   The SSL certificate file being used by the QuickBooks Gateway (aka Remote Connector). If your public key certificate is stored in a file, you may set this configuration setting to the full path of the certificate, and it will be immediately read from disk and stored in SSLAcceptServerCert. Equivalent to setting SSLAcceptServerCert to file contents. Reading the value of this setting will return an empty string.

StopOnError:   Specifies how QuickBooks is to proceed if an error occurs in processing of the current request. If StopOnError is True (default), QuickBooks will stop processing when an error occurs. Requests that have already been processed will not be rolled back. An error is returned for the operation that caused the error condition. If StopOnError is False, QuickBooks will continue processing the remaining requests if an error occurs.

TimeCreated:   The time the object was created. This config setting is read-only.

TimeModified:   The time the object was created. This config setting is read-only.

UnattendedModePref:   Whether connecting while QuickBooks is closed is required or optional for the user. This setting allows you to let the user know immediately whether your application requires the ability to access QuickBooks while QuickBooks is closed. A list of available values is provided below. umpOptional Causes the QuickBooks authorization dialog to display its default selections and let the user pick. Use this setting if you do not need unattended mode. umpRequired Causes the QuickBooks authorization dialog to display only the selection choices of "No" (no authorization) or "Yes, allow access even if QuickBooks is not running" (authorize unattended mode). The default value is umpOptional.

UpdateAdjustInventory:   Updates the inventory adjustment in QuickBooks. This config will immediately build and send an update request for the inventory adjustment to QuickBooks. The inventory adjustment will have its information updated based on the various property values. If QuickBooks is able to update the object, it will return a copy of the object, and the values of all properties will be reset from the QuickBooks response. The QBResponseAggregate property will also be set to the entire QBXML aggregate received from QuickBooks. QBXMLVersion must be set to "9.0" or greater to update an inventory adjustment.

WarningCodes:   A comma-separated list of QuickBooks warning codes that should not result in an exception. By default, the component will throw an exception when a status code with severity "Warn" is returned in a QuickBooks response. Set this field to a comma-separated list of status codes that should not throw an exception if returned. Note that the QuickBooks response code is not necessarily the same as the exception code from the resulting exception.

Base Config Settings

BuildInfo:   Information about the product's build. When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations. The default code page is Unicode UTF-8 (65001). The following is a list of valid code page identifiers: Identifier Name 037 IBM EBCDIC - U.S./Canada 437 OEM - United States 500 IBM EBCDIC - International 708 Arabic - ASMO 708 709 Arabic - ASMO 449+, BCON V4 710 Arabic - Transparent Arabic 720 Arabic - Transparent ASMO 737 OEM - Greek (formerly 437G) 775 OEM - Baltic 850 OEM - Multilingual Latin I 852 OEM - Latin II 855 OEM - Cyrillic (primarily Russian) 857 OEM - Turkish 858 OEM - Multilingual Latin I + Euro symbol 860 OEM - Portuguese 861 OEM - Icelandic 862 OEM - Hebrew 863 OEM - Canadian-French 864 OEM - Arabic 865 OEM - Nordic 866 OEM - Russian 869 OEM - Modern Greek 870 IBM EBCDIC - Multilingual/ROECE (Latin-2) 874 ANSI/OEM - Thai (same as 28605, ISO 8859-15) 875 IBM EBCDIC - Modern Greek 932 ANSI/OEM - Japanese, Shift-JIS 936 ANSI/OEM - Simplified Chinese (PRC, Singapore) 949 ANSI/OEM - Korean (Unified Hangul Code) 950 ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) 1026 IBM EBCDIC - Turkish (Latin-5) 1047 IBM EBCDIC - Latin 1/Open System 1140 IBM EBCDIC - U.S./Canada (037 + Euro symbol) 1141 IBM EBCDIC - Germany (20273 + Euro symbol) 1142 IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) 1143 IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) 1144 IBM EBCDIC - Italy (20280 + Euro symbol) 1145 IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) 1146 IBM EBCDIC - United Kingdom (20285 + Euro symbol) 1147 IBM EBCDIC - France (20297 + Euro symbol) 1148 IBM EBCDIC - International (500 + Euro symbol) 1149 IBM EBCDIC - Icelandic (20871 + Euro symbol) 1200 Unicode UCS-2 Little-Endian (BMP of ISO 10646) 1201 Unicode UCS-2 Big-Endian 1250 ANSI - Central European 1251 ANSI - Cyrillic 1252 ANSI - Latin I 1253 ANSI - Greek 1254 ANSI - Turkish 1255 ANSI - Hebrew 1256 ANSI - Arabic 1257 ANSI - Baltic 1258 ANSI/OEM - Vietnamese 1361 Korean (Johab) 10000 MAC - Roman 10001 MAC - Japanese 10002 MAC - Traditional Chinese (Big5) 10003 MAC - Korean 10004 MAC - Arabic 10005 MAC - Hebrew 10006 MAC - Greek I 10007 MAC - Cyrillic 10008 MAC - Simplified Chinese (GB 2312) 10010 MAC - Romania 10017 MAC - Ukraine 10021 MAC - Thai 10029 MAC - Latin II 10079 MAC - Icelandic 10081 MAC - Turkish 10082 MAC - Croatia 12000 Unicode UCS-4 Little-Endian 12001 Unicode UCS-4 Big-Endian 20000 CNS - Taiwan 20001 TCA - Taiwan 20002 Eten - Taiwan 20003 IBM5550 - Taiwan 20004 TeleText - Taiwan 20005 Wang - Taiwan 20105 IA5 IRV International Alphabet No. 5 (7-bit) 20106 IA5 German (7-bit) 20107 IA5 Swedish (7-bit) 20108 IA5 Norwegian (7-bit) 20127 US-ASCII (7-bit) 20261 T.61 20269 ISO 6937 Non-Spacing Accent 20273 IBM EBCDIC - Germany 20277 IBM EBCDIC - Denmark/Norway 20278 IBM EBCDIC - Finland/Sweden 20280 IBM EBCDIC - Italy 20284 IBM EBCDIC - Latin America/Spain 20285 IBM EBCDIC - United Kingdom 20290 IBM EBCDIC - Japanese Katakana Extended 20297 IBM EBCDIC - France 20420 IBM EBCDIC - Arabic 20423 IBM EBCDIC - Greek 20424 IBM EBCDIC - Hebrew 20833 IBM EBCDIC - Korean Extended 20838 IBM EBCDIC - Thai 20866 Russian - KOI8-R 20871 IBM EBCDIC - Icelandic 20880 IBM EBCDIC - Cyrillic (Russian) 20905 IBM EBCDIC - Turkish 20924 IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) 20932 JIS X 0208-1990 & 0121-1990 20936 Simplified Chinese (GB2312) 21025 IBM EBCDIC - Cyrillic (Serbian, Bulgarian) 21027 Extended Alpha Lowercase 21866 Ukrainian (KOI8-U) 28591 ISO 8859-1 Latin I 28592 ISO 8859-2 Central Europe 28593 ISO 8859-3 Latin 3 28594 ISO 8859-4 Baltic 28595 ISO 8859-5 Cyrillic 28596 ISO 8859-6 Arabic 28597 ISO 8859-7 Greek 28598 ISO 8859-8 Hebrew 28599 ISO 8859-9 Latin 5 28605 ISO 8859-15 Latin 9 29001 Europa 3 38598 ISO 8859-8 Hebrew 50220 ISO 2022 Japanese with no halfwidth Katakana 50221 ISO 2022 Japanese with halfwidth Katakana 50222 ISO 2022 Japanese JIS X 0201-1989 50225 ISO 2022 Korean 50227 ISO 2022 Simplified Chinese 50229 ISO 2022 Traditional Chinese 50930 Japanese (Katakana) Extended 50931 US/Canada and Japanese 50933 Korean Extended and Korean 50935 Simplified Chinese Extended and Simplified Chinese 50936 Simplified Chinese 50937 US/Canada and Traditional Chinese 50939 Japanese (Latin) Extended and Japanese 51932 EUC - Japanese 51936 EUC - Simplified Chinese 51949 EUC - Korean 51950 EUC - Traditional Chinese 52936 HZ-GB2312 Simplified Chinese 54936 Windows XP: GB18030 Simplified Chinese (4 Byte) 57002 ISCII Devanagari 57003 ISCII Bengali 57004 ISCII Tamil 57005 ISCII Telugu 57006 ISCII Assamese 57007 ISCII Oriya 57008 ISCII Kannada 57009 ISCII Malayalam 57010 ISCII Gujarati 57011 ISCII Punjabi 65000 Unicode UTF-7 65001 Unicode UTF-8 The following is a list of valid code page identifiers for Mac OS only: Identifier Name 1 ASCII 2 NEXTSTEP 3 JapaneseEUC 4 UTF8 5 ISOLatin1 6 Symbol 7 NonLossyASCII 8 ShiftJIS 9 ISOLatin2 10 Unicode 11 WindowsCP1251 12 WindowsCP1252 13 WindowsCP1253 14 WindowsCP1254 15 WindowsCP1250 21 ISO2022JP 30 MacOSRoman 10 UTF16String 0x90000100 UTF16BigEndian 0x94000100 UTF16LittleEndian 0x8c000100 UTF32String 0x98000100 UTF32BigEndian 0x9c000100 UTF32LittleEndian 65536 Proprietary

LicenseInfo:   Information about the current license. When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information: Product: The product the license is for. Product Key: The key the license was generated from. License Source: Where the license was found (e.g., RuntimeLicense, License File). License Type: The type of license installed (e.g., Royalty Free, Single Server). Last Valid Build: The last valid build number for which the license will work.

MaskSensitive:   Whether sensitive data is masked in log messages. In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to True to mask sensitive data. The default is True. This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI:   Tells the component whether or not to use the system security libraries or an internal implementation. When set to False, the component will use the system security libraries by default to perform cryptographic functions where applicable. Setting this setting to True tells the component to use the internal implementation instead of using the system security libraries. This setting is set to False by default on all platforms.

Trappable Errors (AdjustInventory Component)

Errors

The following errors may be generated by the component. Note that frequently the error message will contain more specific information than what is listed here.

AdjustInventory Errors

	101   String too long.
	103   Invalid date format (YYYY-MM-DD is standard).
	104   Invalid value for enumerated field.
	105   Invalid integer.
	106   Invalid dollar amount.
	107   Invalid boolean value (must be 'true' or 'false').
	108   Invalid number.
	111   Invalid special characters in string.
	112   Invalid special field syntax.
	181   Could not load certificate file.
	201   Required field unspecified.
	211   Unsupported field specified.
	301   Array line count must be nonnegative.
	302   Array index out of bounds.
	303   Invalid field index.
	401   Field not accessible as a special field.
	402   Write access attempted of readonly field.
	403   Read access attempted of writeonly field.
	421   The object cannot be modified.
	511   The QBRequestId has been previously used. Please generate a new one.
	601   Could not access QuickBooks.
	602   Could not open specified file.
	603   The version of QuickBooks currently being used is not supported.
	604   QuickBooks has not been installed properly.
	605   The specified file was of an incorrect version.
	606   Could not start QuickBooks.
	607   QuickBooks is open in a mode different than the one requested.
	608   QuickBooks cannot currently be accessed.
	609   An application name must be specified.
	610   A file name must be specified if one is not currently open in QuickBooks.
	611   Access denied.
	612   QuickBooks is busy and cannot open your application in the mode requested.
	699   The connection to QuickBooks has failed for an unknown reason.
	702   The object requested does not exist in QuickBooks.
	751   Unsupported QBXML version.
	752   The QBXMLVersion chosen is insufficient to execute the request.
	801   A QuickBooks internal error has occurred.
	802   QuickBooks is not available due to a system-related problem.
	803   The Id specified is invalid.
	804   Invalid object name.
	805   The name already exists in QuickBooks.
	807   An object could not be found in QuickBooks.
	808   A reference did not refer to an object that exists in QuickBooks.
	809   The object is currently in use by the QuickBooks end user.
	810   The object may not be added.
	811   The object may not be updated because it is obsolete.
	812   The address is invalid.
	813   Permission to perform this operation is not granted.
	814   The request has not been processed.
	815   Time creation mismatch.
	816   The feature is turned off or not enabled.
	817   Permission level configured is insufficient for access.
	818    The item specified was of an unknown type.
	819   The object may not be changed.
	820   An internal QuickBooks error has occurred.
	821   An attempt was made to use a connection that was not properly initiated.
	822   An attempt was made to use a connection that is invalid or was previously closed.
	823   Not enough memory.
	824   Unable to lock the necessary information to allow this application access to the company file. Try again later.
	850   An older version of QuickBooks 2002 is being used. Please download the latest update from Intuit.
	851   The QuickBooks request processor was not found. Check that QuickBooks Pro 2002 or higher is installed on your system.
	861   Server error on WebExport (details follow).
	862   The WebExport is impossible: an HTTP context was not found.
	871   You may not set the value of QBConnectionTicket. This value is readonly.
	880   Interrupted by the user.
	881   An error has occurred connecting to a remote machine.
	899   An unknown QuickBooks error has occurred. The message contains more details.
	901   XML Parser Error. Should not occur under normal circumstances.