TSYSSettle Component

Properties Methods Events Config Settings Errors

The TSYSSettle component is used to do a Batch Settlement on all transactions that were successfully authorized with the TSYSECOMMERCE or TSYSRETAIL components. This component may also send Level II and Level III Corporate Purchasing Card data for better interchange rates.

Syntax

TibcTSYSSettle

Remarks

This component allows for a direct, secure connection to the Vital/TSYS gateway through a standard Internet connection. This component can be integrated into web pages or stand-alone Point Of Sale applications. Because all TLS/SSL communications are handled inside the component, any application or web page can be deployed without the need for expensive dedicated TLS/SSL servers. The TSYSSettle component is used to settle all transactions previously authorized by the TSYSECommerce or TSYSRetail component. When a transaction is authorized, money in the customer's account is blocked and tagged for the merchant. However, funds do not actually change hands at this point. When transactions are settled with the TSYSSettle component the funds are deducted from the customer's account and added to the merchant's. It is essential that the authorized transactions are properly recorded and resent later in a Batch Settlement.

To send a Batch Settlement, first the user must fill out the Merchant properties with the same information contained in the authorizing component's Merchant properties.

TSYSSettle.MerchantBankId = "999995" TSYSSettle.MerchantCategoryCode = "5999" TSYSSettle.MerchantName = "test merchant" TSYSSettle.MerchantNumber = "123456789012" TSYSSettle.MerchantCity = "Beverly Hills" TSYSSettle.MerchantState = "CA" TSYSSettle.MerchantStoreNumber = "5999" TSYSSettle.MerchantTerminalNumber = "1515" TSYSSettle.MerchantZip = "90210"

Additionally, the AgentBankNumber, AgentChainNumber, TerminalId, BatchNumber, and IndustryType must be set. Note that the TerminalId is fundamentally different from the TerminalNumber. The TerminalNumber is used to identify a unique terminal (PC, server, whatever) within a merchant location. The TerminalId, also known as the "V Number", is used for point-of-sale tracking. TSYSSettle.AgentBankNumber = "000000" TSYSSettle.AgentChainNumber = "111111" TSYSSettle.TerminalId = "00000001" TSYSSettle.BatchNumber = 15 TSYSSettle.IndustryType = itRetail

At this point, you are ready to add transactions to the batch settlement. Each transaction to be settled must be added to the DetailAggregate array property. First set the DetailRecordCount; to the total number of transactions you wish to settle. Each index in the DetailAggregate array property must be set with the XML aggregate returned from the TSYSRetail, TSYSECommerce, or TSYSDetailRecord component's GetDetailAggregate method.

TSYSSettle.DetailRecordCount = 1 TSYSSettle.DetailAggregate(0) = TSYSRetail.GetDetailAggregate()

Finally, call the SendSettlement method.

TSYSSettle.SendSettlement()

If the transaction is successful, the Code will contain "GB", which indicates a "Good Batch". You should check that the NetDeposit and RecordCount match the NetDeposit and RecordCount properties.

If the transaction is not successful and you receive an "RB" Code (indicating a "Rejected Batch") the component raises an exception. You may inspect the Data. DataFieldNumber, RecordType, SequenceNumber, and ErrorType properties for more information concerning why the batch was rejected. After either fixing this record to resolve the error, or removing the record from the batch, the entire batch must be resubmitted. When resubmitting a batch that was previously rejected, the BatchNumber must be set to the same value that was originally used. It is critical that the same BatchNumber value is used to avoid duplicate charges.

Thousands of detail records may be settled in the above manner, just by increasing the DetailRecordCount and adding a transaction to each index of the DetailAggregate property. However it is recommended that Batch Settlements be kept relatively small - around 100 transactions or so - to decrease the number of records that must be resent in the event of an error.

To Void a transaction that has been authorized but has not yet been settled, simply do not include it in the batch settlement. The block on the cardholder's account will clear automatically. Credits and forced transactions may be created using the TSYSDetailRecord component and settled in the same manner.

To add Level II or Level III data to the settled transactions, use the AddendumAggregate property and the TSYSLevel2 or TSYSLevel3 components.

Note that the IndustryType from the TSYSSettle component MUST match the detail record aggregate of EACH transaction that is added to the settlement. You cannot mix industry types in a batch - you must settle a separate batch for each industry type.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


AgentBankNumber	Identifies a specific agent entity of the member bank or processor.
AgentChainNumber	Identifies a specific chain of an agent organization.
Batch	Contains information about the batch settlement, as computed by the component.
BatchNumber	Sequence number of this batch transaction.
DetailRecords	Collection of detail records to send in the settlement.
Error	Contains information about settlement errors.
IndustryType	Code which indicates the industry the merchant is engaged in.
Merchant	Contains the merchant's setup information.
MerchantLocalPhone	Merchant's local phone number. Used in settlement only.
Response	Contains the response to a batch settlement.
SSLAcceptServerCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertStore	This is the name of the certificate store for the client certificate.
SSLCertStorePassword	If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreType	This is the type of certificate store for this certificate.
SSLCertSubject	This is the subject of the certificate used for client authentication.
SSLProvider	This specifies the SSL/TLS implementation to use.
SSLServerCertEncoded	This is the certificate (PEM/Base64 encoded).
TerminalId	Contains number to accommodate a POS device tracking number.
Timeout	A timeout for the component.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
Interrupt	Interrupts the current action.
Reset	Resets all the properties of the entire settlement to their default values.
SendSettlement	Begins a Batch Settlement transaction with the transaction server.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


Connected	Fired immediately after a connection completes (or fails).
DataPacketIn	Fired when receiving a data packet from the transaction server.
DataPacketOut	Fired when sending a data packet to the transaction server.
Disconnected	Fired when a connection is closed.
Error	Information about errors during data delivery.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.


AmexAggregatorName	Contains the name of the Payment Service Provider/Aggregator or Facilitator participating in Amex OptBlue program.
CombineRecords	Whether settlement records are being concatenated into a single settlement block.
DeviceCode	A 1-character value used to identify the device and type of the merchant submitting the settlement batch.
GenKey	A randomly generated string of alphanumeric characters identifying the terminal.
HeartlandDeviceId	Specifies a device ID to uniquely identify each terminal (card data entry device).
HeartlandEncryptionMode	Specifies the encryption mode to use in Heartland transactions.
HeartlandKeyBlock	Specifies the key block used to encrypt the data.
LocationNumber	Provides additional information on the location of the merchant.
Port	The port to which transactions are posted.
Processor	Specifies the Processor you are connecting to.
Server	The server to which transactions are posted.
TravelAgencyCode	Contains the Travel Agency IATA Code if the ticket was issued by a travel agency.
TravelAgencyName	Contains the Travel Agency Name if the ticket was issued by a travel agency.
UseHTTPPOST	Tells the component whether or not to use HTTP POST when transmitting the Batch for Settlement.
CloseStreamAfterTransfer	If true, the component will close the upload or download stream after the transfer.
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the component binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

AgentBankNumber Property (TSYSSettle Component)

Identifies a specific agent entity of the member bank or processor.

Syntax

property AgentBankNumber: String read get_AgentBankNumber write set_AgentBankNumber;

Default Value

'000000'

Remarks

This field contains a six digit number assigned by the merchant's bank or processor. This field is issued by the merchant's member bank or processor for purposes of identifying a specific agent entity of the member bank or processor.

This is a Header Property, and needs to be set once for a single Batch Settlement transaction.

AgentChainNumber Property (TSYSSettle Component)

Identifies a specific chain of an agent organization.

Syntax

property AgentChainNumber: String read get_AgentChainNumber write set_AgentChainNumber;

Default Value

'000000'

Remarks

This field contains a six digit number assigned by the merchant's bank or processor. This field is issued by the merchant's member bank or processor for purpose of identifying a specific chain of an agent organization.

This is a Header Property, and needs to be set once for a single Batch Settlement transaction.

Batch Property (TSYSSettle Component)

Contains information about the batch settlement, as computed by the component.

Syntax

property Batch: TibcTSYSBatchInfo read get_Batch;

Remarks

When building a settlement, the component will calculate the properties in the table below.


CashBackTotal	Total amount of cash back for all transactions in the batch.
HashingTotal	Total of purchases plus refunds.
NetDeposit	Total of purchases minus refunds.
RecordCount	Total number of records sent including Header, Parameter, and Trailer. Should be compared to the response RecordCount.

This property is read-only.

Please refer to the TSYSBatchInfo type for a complete list of fields.

BatchNumber Property (TSYSSettle Component)

Sequence number of this batch transaction.

Syntax

property BatchNumber: Integer read get_BatchNumber write set_BatchNumber;

Default Value

Remarks

This property contains a three digit batch sequence number generated by the Point of Sale (POS) device. The batch number must be within the range "001" to "999". If the POS device is automatically incrementing the batch number, it should automatically advance the number from "999" to "001"("000" is invalid). Batch numbers must not be reused or repeated within 5 consecutive days.

This is a Header Property, and needs to be set once for a single Batch Settlement transaction.

If the transaction is successful, the Code will contain "GB", which indicates a "Good Batch". You should check that the NetDeposit and RecordCount match the NetDeposit and RecordCount properties.

DetailRecords Property (TSYSSettle Component)

Collection of detail records to send in the settlement.

Syntax

property DetailRecords: TibcTSYSRecordTypeList read get_DetailRecords write set_DetailRecords;

Remarks

Each TSYSRecordType object in the collection specifies an xml aggregate representing the transaction to be settled. The TSYSRecordType may also specify an addenda aggregate for sending Level2 or Level2 and Level3 data. The XML aggregate to be settled is generated from the TSYSRetail, TSYSECommerce, TSYSGiftCard, TSYSBenefit, or TSYSDetailRecord component.

The following example shows how to add a detail record to the collection. TSYSEcommerce1.Authorize(); TSYSSettle.DetailRecords.Add(new TSYSRecordType(TSYSEcommerce1.GetDetailAggregate()));

Xml aggregates are used instead of directly passing Objects because it is easy to store XML aggregates in a database after authorization, and then retrieve them for settlement at the end of the business day.

Thousands of detail records may be settled in the above manner, just by adding transactions to the DetailRecords collection. However it is recommended that Batch Settlements be kept relatively small - around 100 transactions or so - to decrease the number of records that must be resent in the event of an error.

Please refer to the TSYSRecordType type for a complete list of fields.

Error Property (TSYSSettle Component)

Contains information about settlement errors.

Syntax

property Error: TibcTSYSBatchErrorInfo read get_Error;

Remarks

If there is an error in the settlement that results in a rejected batch, this type will contain information that can help you determine what has caused the settlement to fail. The following fields are available:


Data	This contains the actual data which caused the error.
DataFieldNumber	Field within an individual record that contains the error. The component will attempt to determine the property in error based on the contents of this field. However, you may need to consult TSYS support and/or the current EIS-1081 documentation for more information.
DetailRecordIndex	Provides the index of the DetailRecord that caused the batch error.
ErrorType	Type of batch error.
RecordType	Type of record in which an error occurred (header record, detail record, etc).
SequenceNumber	Sequence number of the record that caused an error.

This property is read-only.

Please refer to the TSYSBatchErrorInfo type for a complete list of fields.

IndustryType Property (TSYSSettle Component)

Code which indicates the industry the merchant is engaged in.

Syntax

property IndustryType: TibcTSYSIndustryTypes read get_IndustryType write set_IndustryType;

TibcTSYSIndustryTypes = (
  sitUnknown,
  sitRetail,
  sitRestaurant,
  sitGroceryStore,
  sitDirectMarketing,
  sitHotel,
  sitAutoRental,
  sitPassengerTransport
);

Default Value

sitRetail

Remarks

This property is used to identify the industry type of the merchant submitting the authorization request. The following table lists the industry types supported by this component.


sitUnknown (0)	Unknown or unsure.
sitRetail (1)	Retail store.
sitRestaurant (2)	Food / Restaurant.
sitGroceryStore (3)	Grocery store or supermarket.
sitDirectMarketing (4)	eCommerce or Direct Marketing
sitHotel (5)	Hotel / Lodging
sitAutoRental (6)	Auto Rental
sitPassengerTransport (7)	Passenger Transport

Note: American Express cards are NOT currently supported in the sitAutoRental industry.

Merchant Property (TSYSSettle Component)

Contains the merchant's setup information.

Syntax

property Merchant: TibcTSYSMerchant read get_Merchant write set_Merchant;

Remarks

This property must be set to an instance of the TSYSMerchant type, which will contain information to identify the merchant to the TSYS processing server. Please see the TSYSMerchant type for a list of available properties.

Please refer to the TSYSMerchant type for a complete list of fields.

MerchantLocalPhone Property (TSYSSettle Component)

Merchant's local phone number. Used in settlement only.

Syntax

property MerchantLocalPhone: String read get_MerchantLocalPhone write set_MerchantLocalPhone;

Default Value

Remarks

This property should contain an 11-character merchant phone number in XXX-XXXXXXX format. The initial "1" for long-distance or toll-free calls should be omitted. For instance, "800-1234567" is acceptable, while "1-800-1234567" is not. The fourth character position MUST contain a hyphen. Hyphens may not be used anywhere else.

This phone number should be the number for the local merchant establishment. For the Hotel IndustryType, it should contain the phone number for the actual hotel at which the customer is staying. Likewise, for the Auto Rental IndustryType this property must contain the phone number for the location from which the car is actually rented.

This property is used for Hotel, Auto Rental, and Direct Marketing IndustryTypes.

This property is only used in the settlement, and will be ignored for all authorizations.

Response Property (TSYSSettle Component)

Contains the response to a batch settlement.

Syntax

property Response: TibcTSYSSettleResponse read get_Response;

Remarks

This property will contain the response returned from the TSYS transaction server after calling SendSettlement. This property should be inspected (and logged) after a settlement. The TSYSSettleResponse type contains the following fields:


Code	Indicates the status of the batch transmission.
NetDeposit	Total of purchases minus credits and voids.
Number	Batch number that belongs to this response.
RecordCount	Number of records received by the server for this batch.
Text	Textual description of the Code.
TransmissionDate	Date that the batch was settled.

This property is read-only.

Please refer to the TSYSSettleResponse type for a complete list of fields.

SSLAcceptServerCertEncoded Property (TSYSSettle Component)

This is the certificate (PEM/Base64 encoded).

Syntax

property SSLAcceptServerCertEncoded: String read get_SSLAcceptServerCertEncoded write set_SSLAcceptServerCertEncoded;
property SSLAcceptServerCertEncodedB: TBytes read get_SSLAcceptServerCertEncodedB write set_SSLAcceptServerCertEncodedB;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is not available at design time.

SSLCertEncoded Property (TSYSSettle Component)

This is the certificate (PEM/Base64 encoded).

Syntax

property SSLCertEncoded: String read get_SSLCertEncoded write set_SSLCertEncoded;
property SSLCertEncodedB: TBytes read get_SSLCertEncodedB write set_SSLCertEncodedB;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

This property is not available at design time.

SSLCertStore Property (TSYSSettle Component)

This is the name of the certificate store for the client certificate.

Syntax

property SSLCertStore: String read get_SSLCertStore write set_SSLCertStore;
property SSLCertStoreB: TBytes read get_SSLCertStoreB write set_SSLCertStoreB;

Default Value

'MY'

Remarks

This is the name of the certificate store for the client certificate.

The StoreType property denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject property to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

SSLCertStorePassword Property (TSYSSettle Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

property SSLCertStorePassword: String read get_SSLCertStorePassword write set_SSLCertStorePassword;

Default Value

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLCertStoreType Property (TSYSSettle Component)

This is the type of certificate store for this certificate.

Syntax

property SSLCertStoreType: TibcCertStoreTypes read get_SSLCertStoreType write set_SSLCertStoreType;

TibcCertStoreTypes = (
  cstUser,
  cstMachine,
  cstPFXFile,
  cstPFXBlob,
  cstJKSFile,
  cstJKSBlob,
  cstPEMKeyFile,
  cstPEMKeyBlob,
  cstPublicKeyFile,
  cstPublicKeyBlob,
  cstSSHPublicKeyBlob,
  cstP7BFile,
  cstP7BBlob,
  cstSSHPublicKeyFile,
  cstPPKFile,
  cstPPKBlob,
  cstXMLFile,
  cstXMLBlob,
  cstJWKFile,
  cstJWKBlob,
  cstSecurityKey,
  cstBCFKSFile,
  cstBCFKSBlob,
  cstPKCS11,
  cstAuto
);

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SSLCertSubject Property (TSYSSettle Component)

This is the subject of the certificate used for client authentication.

Syntax

property SSLCertSubject: String read get_SSLCertSubject write set_SSLCertSubject;

Default Value

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

SSLProvider Property (TSYSSettle Component)

This specifies the SSL/TLS implementation to use.

Syntax

property SSLProvider: TibcTSSLProviders read get_SSLProvider write set_SSLProvider;

TibcTSSLProviders = (
  sslpAutomatic,
  sslpPlatform,
  sslpInternal
);

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, on Windows the component will use the platform implementation. On Linux/macOS the component will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

SSLServerCertEncoded Property (TSYSSettle Component)

This is the certificate (PEM/Base64 encoded).

Syntax

property SSLServerCertEncoded: String read get_SSLServerCertEncoded;
property SSLServerCertEncodedB: TBytes read get_SSLServerCertEncodedB;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

This property is read-only and not available at design time.

TerminalId Property (TSYSSettle Component)

Contains number to accommodate a POS device tracking number.

Syntax

property TerminalId: String read get_TerminalId write set_TerminalId;

Default Value

'00000001'

Remarks

This eight digit field contains the number to accommodate a Point Of Sale (POS) device tracking number. This field is also known as the "V" number. Unless otherwise specified by the merchant's bank or processor, this field should be defaulted to "00000001".

Note: If specified, the "V" alpha character must be changed to a numeric 7 when setting this property.

This is a Parameter Property, and need only be set once for a single Batch Settlement transaction.

Timeout Property (TSYSSettle Component)

A timeout for the component.

Syntax

property Timeout: Integer read get_Timeout write set_Timeout;

Default Value

Remarks

If Timeout is set to a positive value, and an operation cannot be completed immediately, the component will retry the operation for a maximum of Timeout seconds.

The default value for Timeout is 30 (seconds).

Config Method (TSYSSettle Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Interrupt Method (TSYSSettle Component)

Interrupts the current action.

Syntax

procedure Interrupt();

Remarks

This method interrupts any processing that the component is currently executing.

Reset Method (TSYSSettle Component)

Resets all the properties of the entire settlement to their default values.

Syntax

procedure Reset();

Remarks

This method resets the Header and Parameter Record properties to default values, and clears all Detail Records. To clear only the Detail Records (leaving Header and Parameter records intact) set the DetailRecordCount property to 0.

SendSettlement Method (TSYSSettle Component)

Begins a Batch Settlement transaction with the transaction server.

Syntax

procedure SendSettlement();

Remarks

This begins a Batch Settlement transaction. The Header Record, Parameter Record, all transaction Detail Records, and the computed Trailer Record are sent sequentially to the Vital/TSYS host.

If the transaction is successful, the Code will contain "GB", which indicates a "Good Batch". You should check that the NetDeposit and RecordCount match the NetDeposit and RecordCount properties.

Connected Event (TSYSSettle Component)

Fired immediately after a connection completes (or fails).

Syntax

type TConnectedEvent = procedure (
  Sender: TObject;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnConnected: TConnectedEvent read FOnConnected write FOnConnected;

Remarks

If the connection is made normally, StatusCode is 0, and Description is 'OK'.

If the connection fails, StatusCode has the error code returned by the TCP/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

DataPacketIn Event (TSYSSettle Component)

Fired when receiving a data packet from the transaction server.

Syntax

type TDataPacketInEvent = procedure (
  Sender: TObject;
  DataPacket: String;
  DataPacketB: TBytes
) of Object;

property OnDataPacketIn: TDataPacketInEvent read FOnDataPacketIn write FOnDataPacketIn;

Remarks

This event fires when a packet is received. The entire data packet (including all framing and error detection characters) is contained in the parameter "DataPacket". This parameter may be inspected for advanced troubleshooting, or to extract additional response properties beyond the scope of this component.

DataPacketOut Event (TSYSSettle Component)

Fired when sending a data packet to the transaction server.

Syntax

type TDataPacketOutEvent = procedure (
  Sender: TObject;
  DataPacket: String;
  DataPacketB: TBytes
) of Object;

property OnDataPacketOut: TDataPacketOutEvent read FOnDataPacketOut write FOnDataPacketOut;

Remarks

This event fires right before each data packet is sent. The entire data packet (including all framing and error detection characters) is contained in the parameter "DataPacket". This parameter may be inspected for advanced troubleshooting, or may be modified to support additional features beyond the scope of this component.

Disconnected Event (TSYSSettle Component)

Fired when a connection is closed.

Syntax

type TDisconnectedEvent = procedure (
  Sender: TObject;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnDisconnected: TDisconnectedEvent read FOnDisconnected write FOnDisconnected;

Remarks

If the connection is broken normally, StatusCode is 0, and Description is 'OK'.

If the connection is broken for any other reason, StatusCode has the error code returned by Winsock. Description contains a description of this code. The value of StatusCode is equal to the value of the Winsock error.

Please refer to the Error Codes section for more information.

Error Event (TSYSSettle Component)

Information about errors during data delivery.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

SSLServerAuthentication Event (TSYSSettle Component)

Fired after the server presents its certificate to the client.

Syntax

type TSSLServerAuthenticationEvent = procedure (
  Sender: TObject;
  CertEncoded: String;
  CertEncodedB: TBytes;
  const CertSubject: String;
  const CertIssuer: String;
  const Status: String;
  var Accept: Boolean
) of Object;

property OnSSLServerAuthentication: TSSLServerAuthenticationEvent read FOnSSLServerAuthentication write FOnSSLServerAuthentication;

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (TSYSSettle Component)

Fired when secure connection progress messages are available.

Syntax

type TSSLStatusEvent = procedure (
  Sender: TObject;
  const Message: String
) of Object;

property OnSSLStatus: TSSLStatusEvent read FOnSSLStatus write FOnSSLStatus;

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

TSYSBatchErrorInfo Type

Contains information about settlement errors.

Remarks

Fields

Data
String (read-only)
Default Value: ""

Erroneous data contained within the field specified by DataFieldNumber.

When you receive a Rejected Batch (ResponseCode is "RB"), this 32-character property will contain the data that caused the batch to fail. The record that contains this error is specified by SequenceNumber, and the location of the erroneous data within that record is specified by DataFieldNumber.

DataFieldNumber
Integer (read-only)
Default Value: 0

Field within an invalid record that contains an error.

When you receive a Rejected Batch (ResponseCode is "RB"), this property contains the sequential field number within the data record which caused the batch to be rejected. The erroneous data within this property is returned in Data, and the sequence number of the record that contains this error is specified by SequenceNumber.

DetailRecordIndex
Integer (read-only)
Default Value: -1

Provides the index of the DetailRecord that caused the batch error.

When you receive a Rejected Batch (Response Code of 'RB'), this field will be populated with the index of the DetailRecord that caused the error (provided that it was a Detail Record that caused it). If no error occurred, this field will return "-1".

ErrorType
String (read-only)
Default Value: ""

Type of batch error.

When you receive a Rejected Batch (ResponseCode is "RB"), this one character property will provide additional info as to the nature of the rejected batch. The following table lists the currently defined error types.


B	Blocked terminal.
C	Card type error.
D	Device error.
E	Error in Batch.
S	Sequence error.
T	Transmission error.
U	Unknown error.
V	Routing error.

RecordType
String (read-only)
Default Value: ""

Type of record in which an error occurred.

When you receive a Rejected Batch (ResponseCode is "RB"), this one character property defines the type of data record which caused the batch to be rejected. The table below lists all valid responses.


H	Header Record.
P	Parameter Record.
D	Detail Record.
L	Line Item Detail Record.
T	Trailer Record.

SequenceNumber
Integer (read-only)
Default Value: 0

Sequence number of the record that caused an error.

When you receive a Rejected Batch (ResponseCode is "RB"), this property will contain the sequential number of the data record which caused the rejected batch state. To obtain the index of the DetailRecord in the DetailRecords arrays that contains the erroneous data, please see the DetailRecordIndex. The field within this record that contains erroneous data is specified by DataFieldNumber, and the actual data causing the error will be contained in the Data property.

Constructors

constructor Create();

TSYSBatchInfo Type

Contains information about the batch settlement as computed by the component.

Remarks

When building a settlement, the component will calculate the properties listed below:

Fields

CashBackTotal
String (read-only)
Default Value: "0000000000000000"

Total amount of cash back for all transactions in the batch.

This property contains the total of all cash back amounts reflected in the settlement batch. Note that only Debit Cards, Gift Cards, and EBT cards allow for cash back to be returned to the customer. For normal credit card transactions, this property will be defaulted to zeros.

This is a Trailer property, and is automatically computed by the component.

This amount is to be presented with an implied decimal point. For example, US $10.00 must be represented as 1000, and $0.10 is likewise simply 10. The allowable number of significant digits as well as the positioning of any implied decimal point is dictated by the designated CurrencyCode configuration setting. In the United States (default), the number of allowable significant digits is seven. Thus the maximum TransactionAmount is "9999999", yielding a US dollar amount of $99,999.99. This field may not contain a negative number.

HashingTotal
String (read-only)
Default Value: "0000000000000000"

Total of purchases plus credits.

This 16-digit property contains the batch hashing total generated by the terminal. The hashing total is generated by adding the absolute value of all detail record amounts. Void and purchase return settlement amounts are treated as positive and added to the total, not subtracted from it.

This is a Trailer property, and is automatically computed by the component.

NetDeposit
String (read-only)
Default Value: "0000000000000000"

Total of purchases minus credits.

This 16-digit property contains the net deposit generated by the terminal. The net deposit total is generated by adding the settlement amounts of all detail transaction records and subtracting credit/refund amounts from it.

This is a Trailer property, and is automatically computed by the component.

RecordCount
Integer (read-only)
Default Value: 0

Total number of records sent including Header, Parameter, and Trailer.

This property contains a batch (transaction) record count, calculated by the component. This property is supplied in the Batch Trailer Record and contains the total number of transactions in the batch -- including Header, Parameter, Detail(s), and Trailer records. This property reflects the actual number of records that have been sent, and is independent of the number of detail records sent in the settlement.

This is a Trailer property, and is automatically computed by the component.

Constructors

constructor Create();

TSYSMerchant Type

Contains the merchant's setup information.

Remarks

This type contains the merchant's setup information. This includes the merchant identification, bank routing information, language, location, and other properties that identify the merchant to the TSYS server. Some of the information in these properties will be included on the customer's credit card statement, such as the merchant's Name, State, ServicePhone, etc.

Fields

BankId
String
Default Value: ""

The number which identifies the merchant's bank or processor.

This property contains a six digit Visa assigned Bank Identification Number issued by the merchant's member bank or processor. The acquirer Bank Identification Number (BIN) identifies the member bank that signed the merchant using the Point of Sale application. This property may not remain zero-filled.

Note, the TSYS Server uses the Merchant's BankId and Number to route the transaction to the proper back-end processor. If either number is incorrect (or if you're using test numbers and the test system is offline) the TSYS server will immediately disconnect, and will not supply an error message.

CategoryCode
String
Default Value: ""

Classifies a merchant by the type of store.

This four digit property contains a number assigned by the signing member or processor to identify a merchant industry classification. This value is similar to the Standard Industry Code (SIC).

City
String
Default Value: ""

Merchant's City

For Retail (Card Present) transactions, this property should contain the city in which the merchant is located. This is an optional property. However if it is specified, the Name and State must also be specified.

Note: For Direct Marketing and E-Commerce transactions, for Visa, Discover, and Amex, this property is ignored. ServicePhone is used for those industries instead of City (this does not apply to MasterCard).

Note: This property must contain the same data used in the batch settlement. The first character of this property may not be a space. This property may contain alphanumeric characters, but not punctuation or control characters. The maximum length of this property is 13 characters.

CountryCode
String
Default Value: "840"

Identifies the country where the merchant is located.

This property contains a three digit number assigned by the signing member or processor to identify the merchant's location country. These codes are specified by ISO-3166-1. For the United States, use "840".

CurrencyCode
String
Default Value: "840"

Identifies the type of currency used by the merchant.

This property contains a three digit number assigned by the signing member or processor to identify the merchant's authorization currency. For US Dollars, use "840".

Language
String
Default Value: "00"

Designates the language that response messages will be returned in.

This property contains a two digit language indicator. This value designates the language to be used in formatting the authorization response text message. This property may be changed from transaction to transaction. The following table provides a summary of the languages currently supported.


Indicator	Language
00	English.
01	Spanish.
02	Portuguese.
03	Reserved for Irish.
04	Reserved for French.
05	Reserved for German.
06	Reserved for Italian.
07	Reserved for Dutch.

Name
String
Default Value: ""

Name of the merchant.

This 25 character property contains the merchant name provided by the signing member or processor. The name provided must correspond to the name printed on the customer receipt. The first character of this property may not be a space. This property must contain the same value in both authorization and batch settlement.

This is an optional property. However if this property is specified, the State and City (Retail) or State and ServicePhone (E-Commerce) must also be specified.

This property may contain alphanumeric and punctuation characters. The maximum length of this property is 25 characters.

Number
String
Default Value: ""

A unique number used to identify the merchant within the VisaNet system.

This 12 digit property contains a unique number which is assigned by the signing merchant's bank or processor. This property is used to identify the merchant within the VisaNet system. This number will be right-justified and zero-filled.

Phone
String
Default Value: ""

Merchant's phone number.

This property contains the Merchant's business phone number. This can be the same as the customer service phone number.

ServicePhone
String
Default Value: ""

Merchant's customer service number.

This property contains a merchant telephone number that the cardholder may call for service. It should contain an 11-character phone number in XXX-XXXXXXX format. The initial "1" for long-distance or toll-free calls should be omitted. For instance, "800-1234567" is acceptable, while "1-800-1234567" is not. The fourth character position MUST contain a hyphen. Hyphens may not be used anywhere else.

This property is used for authorizations in the Hotel, Auto Rental, and Direct Marketing Industry Types, and in the settlement for all industry types.

State
String
Default Value: ""

State or province that the merchant is located in.

This two character property contains the merchant state or province provided by the signing member or processor. This property must contain the same data used in the batch settlement.

This is an optional property. However if it is specified the Merchant Name and City (Retail) or Name and ServicePhone (E-Commerce) must also be specified.

StoreNumber
String
Default Value: ""

Used to identify a specific merchant's store within the VisaNet system.

This four digit property contains a number assigned by the signing member, processor, or merchant to identify a specific merchant store within the VisaNet system. This property must be right-justified and zero-filled.

StreetAddress
String
Default Value: ""

Merchant's street address.

This 25 character property contains the Merchant's street address, which should include the street number, street name, and other identifiers of the precise location, such as a building or unit number.

TerminalNumber
String
Default Value: ""

Used to identify a unique terminal within a merchant location.

This four digit property contains a number assigned by the signing member, processor, or merchant to identify a unique terminal within a merchant location. Because the terminal number submitted in the authorization request is echoed back to the terminal in the authorization response, this property may additionally be used in controller-based environments to assist in the matching and routing of authorization request and response messages at the point of concentration. This property must be right-justified and zero-filled.

TimeZone
String
Default Value: "705"

Specifies the GMT offset used to calculate the local time within the VisaNet system.

This filed contains a three digit code used to calculate the local time within the VisaNet authorization system. The differential is calculated by the signing member or processor, providing the standard local time zone differential from Greenwich Mean Time (GMT). The first digit specifies the direction of the differential and offset increment as well as whether daylight savings is observed. The last two digits specify the magnitude of the differential. For example, North Carolina would be "705", California would be "708", and Arizona would be "107" (daylight savings not observed). The following table provides a brief summary of the Time Zone Differential Codes.

Byte #1:


Value	Meaning
0	Positive offset, in hours, ahead of GMT.
1	Negative offset, in hours, behind GMT.
2	Positive offset, in 15 minute increments, ahead of GMT.
3	Negative offset, in 15 minute increments, behind GMT.
4	Positive offset, in 15 minute increments, ahead of GMT, in cities participating in daylight savings.
5	Negative offset, in 15 minute increments, behind GMT, in cities participating in daylight savings.
6	Positive offset, in hours, ahead of GMT, in cities participating in daylight savings.
7	Negative offset, in hours, behind GMT, in cities participating in daylight savings.
8-9	RESERVED.

Bytes #2-3:

If byte #1 designates an area with offset in hours, (0, 1, 6, 7) the value of these bytes should be between "00" and "12", inclusive. If byte #1 designates an area with offset in 15 minute increments, (2-5) the value of these bytes should be between "00" and "48", inclusive.

Zip
String
Default Value: ""

Zip code where the merchant that initiated this transaction is located.

This property contains the nine character code used to further identify the merchant location. Within the United States, the five or nine digit zip code of the address of the store location is used. Outside of the United States, this property will be assigned by the signing member or processor.

This property is alphanumeric, with a maximum length of nine characters. Spaces and dashes are automatically stripped when the property is set.

Constructors

constructor Create();

TSYSRecordType Type

Detail record storage type.

Remarks

This type contains the XML aggregate for a single transaction, as well as an XML aggregate of any additional addenda to be added to the record at settlement. The fields contained by this type are listed below.

Fields

AddendumAggregate
String
Default Value: ""

Optional Detail Record Addendum data (such as Level2 or Level3 data)

The DetailAggregate property contains an xml aggregate of the transaction retrieved from the TSYSECommerce, TSYSRetail, or TSYSDetailRecord component's GetDetailAggregate method. If you wish to accept corporate purchasing cards you will also need to send Level2, and possibly Level3 addendum data along with the DetailAggregate. The AddendumAggregate property takes an xml aggregate containing either Level2 or Level3 addendum data, which will be added to the DetailAggregate. The addendum aggregate may be created with either the TSYSLevel2 or TSYSLevel3 components, and then returned via those component's GetAddendum method.

For example:

'First authorize the credit card TSYSECommerce1.TransactionAmount = "53" TSYSECommerce.Authorize() 'Then, put the result into the settlement component TSYSSettle.DetailRecordCount = 1 TSYSSettle.DetailAggregate[0] = TSYSECommerce.GetDetailAggregate() 'Now build the Level3 Extension. 'The following properties are required for a Visa Corporate Purchasing Card: TSYSLevel3.CardType = tctVisa TSYSLevel3.LocalTax = "EXEMPT" TSYSLevel3.NationalTax = "0" TSYSLevel3.PurchaseOrder = "purchOrdNum" TSYSLevel3.MerchantTaxId = "merchantTaxId" 'Merchant VAT Registration Number TSYSLevel3.CustomerTaxId = "customerTaxId" 'Customer VAT Registration Number TSYSLevel3.CommodityCode = "fake" TSYSLevel3.DiscountAmount = "0" TSYSLevel3.FreightAmount = "0" TSYSLevel3.DutyAmount = "0" TSYSLevel3.DestinationZip = "27709" TSYSLevel3.ShipFromZip = "27709" TSYSLevel3.DestinationCountry = "840" TSYSLevel3.TaxInvoiceNumber = "VATInvoiceRefNo" TSYSLevel3.OrderDate = "060526" TSYSLevel3.FreightTaxAmount = "0" TSYSLevel3.FreightTaxRate = "0" 'Begin adding line items: TSYSLevel3.LineItemCount = 2 TSYSLevel3.LineItemCommodityCode(0) = "fake" TSYSLevel3.LineItemDescription(0) = "hardware" TSYSLevel3.LineItemProductCode(0) = "productCode123" TSYSLevel3.LineItemQuantity(0) = 1 TSYSLevel3.LineItemUnits(0) = "" TSYSLevel3.LineItemUnitCost(0) = "33" TSYSLevel3.LineItemTaxAmount(0) = "0" TSYSLevel3.LineItemTaxRate(0) = "0" TSYSLevel3.LineItemDiscountAmount(0) = "0" TSYSLevel3.LineItemTotal(0) = "33" TSYSLevel3.LineItemCommodityCode(1) = "fake" TSYSLevel3.LineItemDescription(1) = "hardware" TSYSLevel3.LineItemProductCode(1) = "productCode124" TSYSLevel3.LineItemQuantity(1) = 1 TSYSLevel3.LineItemUnits(1) = "" TSYSLevel3.LineItemUnitCost(1) = "20" TSYSLevel3.LineItemTaxAmount(1) = "0" TSYSLevel3.LineItemTaxRate(1) = "0" TSYSLevel3.LineItemDiscountAmount(1) = "0" TSYSLevel3.LineItemTotal(1) = "20" 'Finally, add the Level3 addendum to the same index in the settlement. TSYSSettle.DetailRecordAddendum(0) = TSYSLevel31.GetAddendum()

Note that you may mix corporate and non-corporate card transactions in the same settlement. It is not necessary that all DetailAggregates have a corresponding AddendumAggregate.

DetailAggregate
String
Default Value: ""

Set this property with xml aggregates of the transactions you wish to settle.

To settle previously authorized transactions, this property must be set with the xml aggregate returned from the TSYSRetail, or TSYSECommerce component's GetDetailAggregate method. For instance:

TSYSSettle.DetailRecordCount = 1 TSYSSettle.DetailAggregate[0] = TSYSRetail.GetDetailAggregate()

On occasion, you may need to modify these aggregates before sending them to settlement. For instance, if you're running a restaurant you may need to add a gratuity to the charge. If you're accepting installment payments, you will need to add the installment info. To accomplish this, you may use the TSYSDetailRecord component.

For example, to add a gratuity to a charge:

DetailRecord.ParseAggregate(TSYSRetail.GetDetailAggregate()) DetailRecord.Gratuity = "500" DetailRecord.SettlementAmount = DetailRecord.AuthorizedAmount + DetailRecord.Gratuity TSYSSettle.DetailAggregate[0] = DetailRecord.GetDetailAggregate()

To settle a Passenger Transport transaction authorized with the sitPassengerTransport IndustryType, you must use the TSYSDetailRecord component to add the number of this passenger and the total count of all passengers in the authorization code. For instance, if the authorization transaction included "Three passengers", and this is the first passenger, then the passenger number will be 1, and the passenger count 3. An example is included below:

TSYSRetail.IndustryType = sitPassengerTransport TSYSRetail.Authorize() DetailRecord.ParseAggregate TSYSRetail.GetDetailAggregate() DetailRecord.PassengerCount = 3 DetailRecord.PassengerNumber = 1 DetailRecord.Config("RestrictedTicketIndicator=True") DetailRecord.Config("TicketNumber=8382152100395") DetailRecord.Config("PassengerName=John Smith") DetailRecord.Config("DepartureDate=072117") DetailRecord.Config("Origin=JFK") DetailRecord.Config("Leg1=Carrier=DL;ServiceClass=C;StopOver=X;Destination=LAX") TSYSSettle1.IndustryType = sitPassengerTransport TSYSSettle1.Config("TravelAgencyCode=12345678") 'if ticket was issued by a travel agency TSYSSettle1.Config("TravelAgencyName=Travel and Tours") 'if ticket was issued by a travel agency TSYSSettle1.DetailAggregate[5] = DetailRecord.GetDetailAggregate()

Constructors

constructor Create();

constructor Create(valDetailAggregate: String);

constructor Create(valDetailAggregate: String; valAddendumAggregate: String);

TSYSSettleResponse Type

Contains the response to a batch settlement.

Remarks

This type contains the results of a batch settlement made with the TSYSSettle component. The properties contained by this type are listed below.

Fields

Code
String (read-only)
Default Value: ""

Indicates the status of the batch transmission.

This property contains the two character response code returned by the host indicating the status of the Batch Settlement attempt. The following table provides a summary of the response returned by the TSYS host:


GB	Good Batch.
QD	Duplicate Batch.
RB	Rejected Batch.

NetDeposit
String (read-only)
Default Value: ""

Total of purchases minus credits and voids.

This property contains the net deposit generated by the terminal. It should equal the BatchNetDesposit property, which is computed by the component. The net deposit total is generated by adding the settlement amounts of all detail transaction records and subtracting credit amounts from it. This property is represented as an absolute value and cannot be negative.

Number
Integer (read-only)
Default Value: 0

Batch number that belongs to this response.

This property should be compared to the BatchNumber in order to match a response with a given Batch Settlement. If running in synchronous mode, this property should always be identical to BatchNumber.

RecordCount
Integer (read-only)
Default Value: 0

Number of records received by the server in this batch.

This property contains the total number of records received by the host -- including Header, Parameter, Detail, and Trailer records. In the case of a Code of "GB" (Good Batch), the value returned should match the value in the Batch.RecordCount property. In the case of a Code of "RB" (Rejected Batch), this property will reflect the total number of records received until the point of failure. RecordCount + 1 will reveal the sequential number of the transaction record responsible for causing a rejected batch condition, and should be identical to the Error.SequenceNumber property in this case.

Text
String (read-only)
Default Value: ""

Contents of this field are dependent upon the Code.

This nine character property will contain the text "_ACCEPTED" when a settlement batch has been successfully received by the host. However, the Point of Sale (POS) device should examine only the Code to determine the status of a particular Batch Settlement.

TransmissionDate
String (read-only)
Default Value: ""

Date that the batch was settled.

This property is reserved, pending the future upgrade to a higher protocol version.

Constructors

constructor Create();

Config Settings (TSYSSettle Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

TSYSSettle Config Settings

AmexAggregatorName: Contains the name of the Payment Service Provider/Aggregator or Facilitator participating in Amex OptBlue program.

This configuration setting is used for Amex OptBlue participators to determine the name of the Payment Service Provider, Aggragator or Facilitator. You need to set this field for transactions originating from an Aggregator, Payment Service Provider or Facilitator. The maximum length of this field is 12-characters and it must not contain spaces.

CombineRecords: Whether settlement records are being concatenated into a single settlement block.

Default value of this configuration setting is True meaning that settlement records will be combined together to optimize message size and expedite the overall settlement process by minimizing the total number of settlement packets to be transmitted. Setting this to False will send each record as a separate settlement packet during the batch settlement process.

DeviceCode: A 1-character value used to identify the device and type of the merchant submitting the settlement batch.

This configuration setting contains a 1-character value used to identify the device and type of the merchant submitting the settlement batch. The table below provides a summary of currently defined values. The default value for this setting is "Q".


0	Unknown or unsure.
B	Automated Teller Machine (ATM).
C	Personal Computer (PC)
D	Dial terminal
E	Electronic Cash Register (ECR)
G	Mobile Payment Acceptance.
H	TSYS Hosted Payment.
I	In-store processor
J	Multi Payment Acceptance.
M	Mainframe
P	POS-Port
Q	Third-party developer
R	POS-Port
S	POS Partner
T	Counter Payment Acceptance.
W	Web Payment Acceptance.
X	EMV Mode Contact and/or Contactless terminal (Must be used on all EMV mode chip card transactions).
Z	Suppress PS2000/Merit fields

GenKey: A randomly generated string of alphanumeric characters identifying the terminal.

This field is used to specify retrieve or specify a GenKey value for a terminal. This field will be populated after a successful call to ActivateTerminal is made. The Genkey must be stored in the POS device, must be sent with every request to the TSYS Acquiring Solutions host after authentication (by setting this field), and will be checked against the terminal hierarchy. A GenKey value is required when processing transactions using Voltage Encryption or Tokenization.

HeartlandDeviceId: Specifies a device ID to uniquely identify each terminal (card data entry device).

The specified value must be 4 characters or less. Note that this value is required to comply with MasterCard's Authorization Data Accuracy Initiative.

HeartlandEncryptionMode: Specifies the encryption mode to use in Heartland transactions.

This field allows you to specify the Heartland E3 encryption mode used when processing Heartland transactions. The available values are (descriptions describe the data that will be encrypted):


0	No Encryption (default)
1	Merchant ID and Card Data (reserved for future use)
2	Merchant ID, Card Data, and Card Security Code (reserved for future use)
3	Card Data Only

Note you will also need to set Processor to 1 (Heartland) and HeartlandKeyBlock if you wish to process Heartland E3 transactions.

HeartlandKeyBlock: Specifies the key block used to encrypt the data.

This field allows you to specify the key block that was used to encrypt the data specified by HeartlandEncryptionMode. This value will be obtained from an E3 magnetic stripe reader and is used by Heartland to decrypt the encrypted data.

LocationNumber: Provides additional information on the location of the merchant.

This field contains a five character value providing additional information on the location of the merchant. Unless otherwise specified by the merchant's bank or processor, this field should be defaulted to "00001".

This is a Parameter Property, and only needs to be set once for a single Batch Settlement transaction.

Port: The port to which transactions are posted.

This is port that this component connects to on the server. The default value for TSYS is 5003 for the live server, and 5004 for the test server. The default live server values for Heartland is 22341 for Authorization and 22342 for Settlement. The Heartland test server values are 12341 for Authorization and 12342 for Settlement.

Processor: Specifies the Processor you are connecting to.

This field allows you to specify the processor that you are connecting to (thus allowing the component to correctly generate the request and parse the response). The available values are:


0	TSYS (default)
1	Heartland

Note that when set, this property will set the Server and Port to the default values for the specified processor. Additionally, this config must be set prior to setting Card to ensure the card data is formatted correctly.

Server: The server to which transactions are posted.

This is name of the server to which all transactions are posted. Do not use an IP address, use the actual name, as a server's IP address may change. The default (Live) TSYS server is "ssl2.vitalps.net", but you may use "ssltest.tsysacquiring.net" for testing. The default (Live) Heartland server is "txns.secureexchange.net", but you may use "test.txns.secureexchange.net" for testing. Note that there are several BankIds and Numbers that will always run in test mode regardless of whether you are using the live server. See the included demos for examples.

TravelAgencyCode: Contains the Travel Agency IATA Code if the ticket was issued by a travel agency.

You do not need to set this field if the merchant is not a travel agency. The default value of this field is space-filled.

TravelAgencyName: Contains the Travel Agency Name if the ticket was issued by a travel agency.

You do not need to set this field if the merchant is not a travel agency. The default value of this field is space-filled.

UseHTTPPOST: Tells the component whether or not to use HTTP POST when transmitting the Batch for Settlement.

Default value of this configuration setting is False meaning that settlement records will be sent using Socket connection. When True, the component will submit the whole batch at once using POST. You must also set Server to the correct end-point for POST transmission.

Note that the maximum batch size that can be transmitted via POST is 2MB.

TCPClient Config Settings

CloseStreamAfterTransfer: If true, the component will close the upload or download stream after the transfer.

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the component whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

The appropriate values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the component binds.

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the component will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the component is the same.

SSLCACerts: A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP: Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the component will use OCSP to check the validity of the server certificate. If set to 1 or 2, the component will first obtain the OCSP URL from the server certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the component will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when SSLProvider is set to Internal:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA");

Possible values when SSLProvider is set to Internal include:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30) [Platform Only]
SSL2	12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the component will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

The platform provider is only available on Windows 11 / Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the component when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is True by default, but can be set to False to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion: Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown Certificate Authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown Certificate Authority revocation status.
0x00000800	Ignore unknown Root revocation status.
0x00008000	Allow test Root certificate.
0x00004000	Trust test Root certificate.
0x80000000	Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component raises an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to True to mask sensitive data. The default is True.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to False, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to True tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to False by default on all platforms.

Trappable Errors (TSYSSettle Component)

TSYSSettle Errors


	501 Data field invalid length.
	502 Data field invalid format.
	503 Data field out of range.
	504 Luhn digit check failed.
	505 Card date invalid.
	506 Card expired.
	507 Card type unknown.
	509 No gateway specified.
	511 Invalid data entered.
	512 Truncated response.
	513 Invalid response.
	517 Response length mismatch.
	518 LRC check failed.
	519 Corrupt response.
	520 Response packet empty.
	521 Response truncated.
	522 Host disconnected.
	523 No response from host.
	524 Server error response.
	526 Invalid timeout value.
	527 Vital/TSYS returned an error response.
	535 Signature verification failed.
	544 Error building packet.
	593 Missing or erroneous property value. Cannot send transaction.
	594 Response received before transmission completed.
	595 Prematurely disconnected (check Number and BankId).
	596 Pending responses max number exceeded (Interleaved).
	597 Pending response timeout (Interleaved).
	606 One or more detail records are empty.

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors


	100 You cannot change the RemotePort at this time. A connection is in progress.
	101 You cannot change the RemoteHost (Server) at this time. A connection is in progress.
	102 The RemoteHost address is invalid (0.0.0.0).
	104 Already connected. If you want to reconnect, close the current connection first.
	106 You cannot change the LocalPort at this time. A connection is in progress.
	107 You cannot change the LocalHost at this time. A connection is in progress.
	112 You cannot change MaxLineLength at this time. A connection is in progress.
	116 RemotePort cannot be zero. Please specify a valid service port number.
	117 You cannot change the UseConnection option while the component is active.
	135 Operation would block.
	201 Timeout.
	211 Action impossible in control's present state.
	212 Action impossible while not connected.
	213 Action impossible while listening.
	301 Timeout.
	302 Could not open file.
	434 Unable to convert string to selected CodePage.
	1105 Already connecting. If you want to reconnect, close the current connection first.
	1117 You need to connect first.
	1119 You cannot change the LocalHost at this time. A connection is in progress.
	1120 Connection dropped by remote host.

SSL Errors


	270 Cannot load specified security library.
	271 Cannot open certificate store.
	272 Cannot find specified certificate.
	273 Cannot acquire security credentials.
	274 Cannot find certificate chain.
	275 Cannot verify certificate chain.
	276 Error during handshake.
	280 Error verifying certificate.
	281 Could not find client certificate.
	282 Could not find server certificate.
	283 Error encrypting data.
	284 Error decrypting data.

TCP/IP Errors


	10004 [10004] Interrupted system call.
	10009 [10009] Bad file number.
	10013 [10013] Access denied.
	10014 [10014] Bad address.
	10022 [10022] Invalid argument.
	10024 [10024] Too many open files.
	10035 [10035] Operation would block.
	10036 [10036] Operation now in progress.
	10037 [10037] Operation already in progress.
	10038 [10038] Socket operation on non-socket.
	10039 [10039] Destination address required.
	10040 [10040] Message too long.
	10041 [10041] Protocol wrong type for socket.
	10042 [10042] Bad protocol option.
	10043 [10043] Protocol not supported.
	10044 [10044] Socket type not supported.
	10045 [10045] Operation not supported on socket.
	10046 [10046] Protocol family not supported.
	10047 [10047] Address family not supported by protocol family.
	10048 [10048] Address already in use.
	10049 [10049] Can't assign requested address.
	10050 [10050] Network is down.
	10051 [10051] Network is unreachable.
	10052 [10052] Net dropped connection or reset.
	10053 [10053] Software caused connection abort.
	10054 [10054] Connection reset by peer.
	10055 [10055] No buffer space available.
	10056 [10056] Socket is already connected.
	10057 [10057] Socket is not connected.
	10058 [10058] Can't send after socket shutdown.
	10059 [10059] Too many references, can't splice.
	10060 [10060] Connection timed out.
	10061 [10061] Connection refused.
	10062 [10062] Too many levels of symbolic links.
	10063 [10063] File name too long.
	10064 [10064] Host is down.
	10065 [10065] No route to host.
	10066 [10066] Directory not empty
	10067 [10067] Too many processes.
	10068 [10068] Too many users.
	10069 [10069] Disc Quota Exceeded.
	10070 [10070] Stale NFS file handle.
	10071 [10071] Too many levels of remote in path.
	10091 [10091] Network subsystem is unavailable.
	10092 [10092] WINSOCK DLL Version out of range.
	10093 [10093] Winsock not loaded yet.
	11001 [11001] Host not found.
	11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
	11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
	11004 [11004] Valid name, no data record (check DNS setup).