4D Payments SDK 2016 .NET Edition

Questions / Feedback?

CCCard Type

Contains the customer's credit card information.

Remarks

This type contains the customer's credit card information. If you are processing transactions where the customer and his credit card are physically present, set the MagneticStripe field with the data read from the card reader. You may set either Track1 or Track2 data (but not both). You must also set the EntryDataSource to indicate which track is stored in the MagneticStripe field.

Example: Setting the Fields

CCCard card = new CCCard();
card.MagneticStripe = "B4012000033330026^FDMS TEST CARD   /VISA^090410054321000000000000000  150  A";
card.EntryDataSource = edsTrack1;
Example: Using a Constructor
CCCard card = new CCCard("B4012000033330026^FDMS TEST CARD   /VISA^090410054321000000000000000  150  A", edsTrack1);

If you are processing a transaction where the credit card is not physically present (eCommerce, mail/order, etc) or if the magstripe on the back of the card cannot be read by the card reader, you must set the Number, ExpMonth, and ExpYear fields, and EntryDataSource must be set to one of the manually entered enumerations.

Example: Setting the Fields

CCCard card = new CCCard();
card.Number = "4788250000028291";
card.ExpMonth = 12;
card.ExpYear = 2010;
card.EntryDataSource = edsManualEntryNoCardReader;
Example: Using a Constructor
CCCard card = new CCCard("4012000033330026", 04, 2009);
Note that the constructor in the previous example automatically sets the EntryDataSource to edsManualEntryNoCardReader. If you wish to set any other value for the EntryDataSource, you must set it yourself before authorizing the transaction.

When authorizing a transaction, the fields used by the component are solely dependant on the value of EntryDataSource. If you set the Number, ExpMonth, and ExpYear fields, but EntryDataSource is set to edsTrack2, the component will look for MagneticStripe data when authorizing the transaction, and will throws an exception because none is present.

Fields

CardType
TCardTypes

Type of credit card being used in this transaction. This field contains the customer's credit card type. This is automatically computed after the Number is set, but it can also be changed manually. A list of valid card types is included below.

ctUnknown (0) Invalid or unknown prefix, card type not known.
ctVisa (1) Visa or Delta Card.
ctMasterCard (2) MasterCard.
ctAMEX (3) American Express Card.
ctDiscover (4) Discover Card.
ctDiners (5) Diners Club or Carte Blanche Card.
ctJCB (6) JCB Card.
ctVisaElectron (7) Visa Electron Card (runs as a Visa for most gateways)
ctMaestro (8) Maestro Card
ctLaser (10) Laser Card (Ireland)

CVVData
String

Three digit security code on back of card (optional).

This alphanumeric field contains the three digit Visa "Card Verification Value" (CVV), MasterCard "Card Verification Code" (CVC), or four-digit American Express "Card Identification Number" (CID). This value appears as additional characters embossed on the card signature line following the credit card account number on the back of the credit card. This is an optional field which can be used to determine if the customer is actually in possession of the credit card.

Even if the CVVData is incorrect, the transaction may still be authorized. It is up to the merchant to examine the ResponseCVVResult field and decide whether to honor the transaction or not.

Note: When set to a non-empty value, CVVPresence will be automatically set to cvpProvided. If set to empty string (""), CVVPresence will be automatically set to cvpNotProvided.

CVVPresence
CCCVVPresences

Indicates the presence of the card verification value.

This field is used to indicate the presence of CVVData.

The component will automatically set this value to cvpProvided when a CVVData value is specified. You can explicitly specify the CVVPresence indicator by setting this property.

Available values are:

  • cvpNotProvided (0)
  • cvpProvided (1)
  • cvpIllegible (2)
  • cvpNotOnCard (3)

EntryDataSource
EntryDataSources

This field contains a 1-character code identifying the source of the customer data. The table below shows all supported values for this field.

edsTrack1 (0) Full Magnetic stripe read and transmit, Track 1.
edsTrack2 (1) Full magnetic stripe read and transmit, Track 2.
edsManualEntryTrack1Capable (2) Manually keyed, Track 1 capable.
edsManualEntryTrack2Capable (3)Manually keyed, Track 2 capable.
edsManualEntryNoCardReader (4)Manually keyed, terminal has no card reading capability (use this for e-commerce and MOTO transactions).
edsTrack1Contactless (5)Full magnetic stripe read (Track 1 only), Chip Card capable terminal (Visa, Mastercard, and JCB Transactions only).
edsTrack2Contactless (6)Full magnetic stripe read (Track 2 only), Chip Card capable terminal (Visa, Mastercard, and JCB Transactions only).
edsManualEntryContactlessCapable (7)Manually keyed, Chip Card read capable terminal (Visa, MasterCard, and JCB transactions only).
edsIVR (8)Interactive Voice Response processing. This is applicable to Mail Order/Telephone Order (MOTO) transactions. (Number, ExpMonth, and ExpYear are sent).
edsKiosk (9)Automated kiosk transaction. Track1 or Track2 data must be sent in MagneticStripe, the transaction cannot be manually entered.

Below is a list of processors and their support EntryDataSource values:

FDMS - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable, edsIVR, edsKiosk

FDMSOmaha - All EntryDataSources applicable

FDMS Rapid Connect - All EntryDataSources applicable

Global - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsIVR, edsKiosk

PTech - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable

TSYS - edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsManualEntryNoCardReader, edsTrack2Contactless, edsManualEntryContactlessCapable

TSYSHC - Values are based on Industry type.

TSYSHCBenefit edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable
TSYSHCECommerce edsManualEntryNoCardReader
TSYSHCRetail edsTrack1, edsTrack2, edsManualEntryTrack1Capable, edsManualEntryTrack2Capable, edsTrack1Contactless, edsTrack2Contactless, edsManualEntryContactlessCapable

ExpMonth
Integer

Expiration month of the credit card specified in Number.

This field contains the expiration date of the customer's credit card, and must be in the range 1 - 12.

ExpYear
Integer

Expiration year of the credit card specified in Number.

This field contains the expiration date of the customer's credit card. This field must be in the range 0 - 99, or 2000 - 2099. Any date before the year 2000 or after 2099 cannot be specified.

IsEncrypted
Boolean

Determines whether data set to the Number or MagneticStripe fields is validated.

By default, when the Number or MagneticStripe fields are set, the value will be validated and normalized. For instance, "4444-33332222 1111" will be normalized as "4444333322221111" and MagneticStripe data will be parsed for the track specified by EntryDataSource. However, any other non-numerical data entered will cause an exception to be thrown. It may be useful in some gateways to send other data in the Number or MagneticStripe fields, and this can be accomplished by setting IsEncrypted to true. However, please note that in doing so automatic calculation of the CardType may be affected, and the card number will not be verified.

MagneticStripe
String

Track data read off of the card's magnetic stripe.

If EntryDataSource is not one of the manually entered enumerations, then this field must be set with the track1 or track2 data from the magnetic stripe on the back of the customer's credit card. This includes everything after but not including the start sentinel (% or ;) and up to but not including the end sentinel (?) and LRC check character. You may only set this field with track 1 or track 2 data, and may not pass both. Use the EntryDataSource field to indicate which track you are sending.

The following example shows how to set the MagneticStripe and EntryDataSource fields if the data read off the card is "%B4788250000028291^TSYS^05121015432112345678?;4788250000028291=05121015432112345678?"


component.Card = new CCCard("B4788250000028291^TSYS^05121015432112345678", dsTrack1)

or 

component.Card = new CCCard("4788250000028291=05121015432112345678", dsTrack2)

or

CCCardType Card = new CCCard()
Card.MagneticStripe = "B4788250000028291^TSYS^05121015432112345678"
Card.EntryDataSource = dsTrack1

Industry regulations do not allow merchants or processors to store track data in any form of persistent storage. Failure to abide by this regulation can result in significant fines and other penalties.

Number
String

Customer's credit card number for the transaction.

If you're sending the transaction with MagneticStripe data, this field should be left empty.

Constructors

public CCCard();
Public CCCard()
public CCCard(string number, int expMonth, int expYear);
Public CCCard(ByVal Number As String, ByVal ExpMonth As Integer, ByVal ExpYear As Integer)
public CCCard(string magneticStripe, EntryDataSources entryDataSource);
Public CCCard(ByVal MagneticStripe As String, ByVal EntryDataSource As EntryDataSources)

 
 
Copyright (c) 2021 4D Payments Inc. - All rights reserved.
4D Payments SDK 2016 .NET Edition - Version 16.0 [Build 7809]