4D Payments SDK 2016 .NET Edition

Questions / Feedback?

PTechHostSettle Component

Properties   Methods   Events   Configuration Settings   Errors  

The PTechHostSettle component is used to manually settle an open Batch with the Paymentech NetConnect system on the Tampa platform. This component supports Direct Marketing, e-Commerce, and Retail environments, and allows for simple, direct, secure communication to the Paymentech TLS/SSL gateway through a standard Internet connection. This component can be integrated into web pages or stand-alone Point Of Sale applications. Because all TLS/SSL communications are handled inside the component, any application or web page can be deployed without the need for expensive dedicated TLS/SSL servers.

Syntax

DPayments.DPaymentsSDK.Ptechhostsettle

Remarks

Once an authorization request is approved with either the PTechCharge or PTechGiftCard component, one of two things happen. If your Paymentech account is setup with the Host Auto Close feature enabled, you need take no further action. The host will close the current open batch at a designated time each day. This means that there is no end of day batch processing required from the merchant. In order for the merchant's batch to be included in the Paymentech Host Auto Close process, the merchant parameter file on the host must indicate that the merchant is Auto Close. If this flag is set, the PTechHostSettle component is not necessary.

However, if your account is not setup with Host Auto Close, then after an authorization is approved the transaction is added to the current batch on the Paymentech Server, and the money in the customer's account is blocked and tagged for the merchant. The transaction must go through the Manual Batch Release Settlement process in order for the blocked money to be transferred to the merchant's account. To release a batch for settlement, first set the MerchantNumber, TerminalNumber, ClientNumber, UserId, and Password with the information given to you when you signed up for Paymentech service. Then get the Net Amount of the batch by calling the BatchInquiry method. Compare this amount to the amount in your transaction records. If they match, you may send a BatchRelease to settle the funds.

The status of a batch inquiry or release is returned in the Code. with a human-readable description contained in Text. Additional Response properties indicate the number of transactions in the batch, the date and time the batch was opened and closed, and Net amount of the batch.

Normally a BatchRelease is done at the end of each business day. Outstanding authorizations (even those in an open batch) will expire after 7 to 10 days depending on the cardholder's bank, so it is wise to release the batch often.

Note that this component only supports the Manual Batch Release (Host Capture) settlement method, and does not support Terminal Capture processing (this component is not required for Host Auto Close).

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

CardTypeIndicates the card type for which the terminal is requesting totals or details on.
ClientNumberMerchant configuration property, assigned by Paymentech.
InquiryTypeThe type of batch inquiry to be submitted.
MerchantNumberA unique number used to identify the merchant, assigned by Paymentech.
MoreDataIndicates whether the Paymentech server has more data to return.
PasswordPassword for authentication with the NetConnect Server .
PaymentTypesCollection of payment types in the current batch.
ProxyA set of properties related to proxy access.
RequestStatusUsed with enhanced BatchInquiry s to retrieve the next set of transaction data.
ResponseContains the response to the settlement.
SequenceNumberSequence number of the transaction.
ServerThe URL for the PaymenTech NetConnect server.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during SSL negotiation.
SSLServerCertThe server certificate for the last established connection.
TerminalNumberTerminal number assigned by Paymentech.
TimeoutA timeout for the component.
TransactionDetailsDetails about each transaction in the current open batch.
TransactionTotalsTotals of each card type that has been authorized in the current open batch.
UserIdUserId for authentication with the NetConnect Server .

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

BatchInquiryRetrieves the current state of the open batch.
BatchReleaseReleases the current batch for settlement.
ConfigSets or retrieves a configuration setting.
InterruptInterrupt the current method.
ResetClears all properties to their default values.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

DataPacketInFired when receiving a data packet from the transaction server.
DataPacketOutFired when sending a data packet to the transaction server.
ErrorInformation about errors during data delivery.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.

Configuration Settings


The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.

ErrorCodeBatch Management Error Code.
SystemInformationSystem Information field for Batch Inquiry and Release transactions.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowHTTPFallbackWhether HTTP/2 connections are permitted to fallback to HTTP/1.1.
AllowNTLMFallbackWhether to allow fallback from Negotiate to NTLM when authenticating.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequestSet to true to compress the body of a PUT or POST request.
EncodeURLIf set to true the URL will be encoded by the component.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to true the component will perform a GET on the new location.
HTTP2HeadersWithoutIndexingHTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersionThe version of HTTP used by the component.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
LogLevelThe level of detail that is logged.
MaxHeadersInstructs component to save the amount of headers specified that are returned by the server after a Header event has been fired.
MaxHTTPCookiesInstructs component to save the amount of cookies specified that are returned by the server when a SetCookie event is fired.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
NegotiatedHTTPVersionThe negotiated HTTP version.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
SentHeadersThe full set of headers as sent by the client.
StatusLineThe first line of the last response from the server.
TransferredDataThe contents of the last response from the server.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the component.
TransferredHeadersThe full set of headers as received from the server.
TransferredRequestThe full request as sent by the client.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
UseIDNsWhether to encode hostnames to internationalized domain names.
UsePlatformDeflateWhether to use the platform implementation to decompress compressed responses.
UsePlatformHTTPClientWhether or not to use the platform HTTP client.
UserAgentInformation about the user agent (browser).
CloseStreamAfterTransferIf true, the component will close the upload or download stream after the transfer.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallListenerIf true, the component binds to a SOCKS firewall as a server (IPPort only).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the component binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
UseNTLMv2Whether to use NTLM V2.
CACertFilePathsThe paths to CA certificate files when using Mono on Unix/Linux.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLNegotiatedCipherReturns the negotiated ciphersuite.
SSLNegotiatedCipherStrengthReturns the negotiated ciphersuite strength.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedProtocolReturns the negotiated protocol version.
SSLProviderThe name of the security provider to use.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
GUIAvailableTells the component whether or not a message loop is available for processing events.
LicenseInfoInformation about the current license.
UseInternalSecurityAPITells the component whether or not to use the system security libraries or an internal implementation.

Copyright (c) 2021 4D Payments Inc. - All rights reserved.
4D Payments SDK 2016 .NET Edition - Version 16.0 [Build 8017]